From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/core-api/pin_user_pages.rst | 279 ++++++++++++++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 Documentation/core-api/pin_user_pages.rst (limited to 'Documentation/core-api/pin_user_pages.rst') diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst new file mode 100644 index 000000000..7ca8c7bac --- /dev/null +++ b/Documentation/core-api/pin_user_pages.rst @@ -0,0 +1,279 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================================== +pin_user_pages() and related calls +==================================================== + +.. contents:: :local: + +Overview +======== + +This document describes the following functions:: + + pin_user_pages() + pin_user_pages_fast() + pin_user_pages_remote() + +Basic description of FOLL_PIN +============================= + +FOLL_PIN and FOLL_LONGTERM are flags that can be passed to the get_user_pages*() +("gup") family of functions. FOLL_PIN has significant interactions and +interdependencies with FOLL_LONGTERM, so both are covered here. + +FOLL_PIN is internal to gup, meaning that it should not appear at the gup call +sites. This allows the associated wrapper functions (pin_user_pages*() and +others) to set the correct combination of these flags, and to check for problems +as well. + +FOLL_LONGTERM, on the other hand, *is* allowed to be set at the gup call sites. +This is in order to avoid creating a large number of wrapper functions to cover +all combinations of get*(), pin*(), FOLL_LONGTERM, and more. Also, the +pin_user_pages*() APIs are clearly distinct from the get_user_pages*() APIs, so +that's a natural dividing line, and a good point to make separate wrapper calls. +In other words, use pin_user_pages*() for DMA-pinned pages, and +get_user_pages*() for other cases. There are five cases described later on in +this document, to further clarify that concept. + +FOLL_PIN and FOLL_GET are mutually exclusive for a given gup call. However, +multiple threads and call sites are free to pin the same struct pages, via both +FOLL_PIN and FOLL_GET. It's just the call site that needs to choose one or the +other, not the struct page(s). + +The FOLL_PIN implementation is nearly the same as FOLL_GET, except that FOLL_PIN +uses a different reference counting technique. + +FOLL_PIN is a prerequisite to FOLL_LONGTERM. Another way of saying that is, +FOLL_LONGTERM is a specific case, more restrictive case of FOLL_PIN. + +Which flags are set by each wrapper +=================================== + +For these pin_user_pages*() functions, FOLL_PIN is OR'd in with whatever gup +flags the caller provides. The caller is required to pass in a non-null struct +pages* array, and the function then pins pages by incrementing each by a special +value: GUP_PIN_COUNTING_BIAS. + +For huge pages (and in fact, any compound page of more than 2 pages), the +GUP_PIN_COUNTING_BIAS scheme is not used. Instead, an exact form of pin counting +is achieved, by using the 3rd struct page in the compound page. A new struct +page field, hpage_pinned_refcount, has been added in order to support this. + +This approach for compound pages avoids the counting upper limit problems that +are discussed below. Those limitations would have been aggravated severely by +huge pages, because each tail page adds a refcount to the head page. And in +fact, testing revealed that, without a separate hpage_pinned_refcount field, +page overflows were seen in some huge page stress tests. + +This also means that huge pages and compound pages (of order > 1) do not suffer +from the false positives problem that is mentioned below.:: + + Function + -------- + pin_user_pages FOLL_PIN is always set internally by this function. + pin_user_pages_fast FOLL_PIN is always set internally by this function. + pin_user_pages_remote FOLL_PIN is always set internally by this function. + +For these get_user_pages*() functions, FOLL_GET might not even be specified. +Behavior is a little more complex than above. If FOLL_GET was *not* specified, +but the caller passed in a non-null struct pages* array, then the function +sets FOLL_GET for you, and proceeds to pin pages by incrementing the refcount +of each page by +1.:: + + Function + -------- + get_user_pages FOLL_GET is sometimes set internally by this function. + get_user_pages_fast FOLL_GET is sometimes set internally by this function. + get_user_pages_remote FOLL_GET is sometimes set internally by this function. + +Tracking dma-pinned pages +========================= + +Some of the key design constraints, and solutions, for tracking dma-pinned +pages: + +* An actual reference count, per struct page, is required. This is because + multiple processes may pin and unpin a page. + +* False positives (reporting that a page is dma-pinned, when in fact it is not) + are acceptable, but false negatives are not. + +* struct page may not be increased in size for this, and all fields are already + used. + +* Given the above, we can overload the page->_refcount field by using, sort of, + the upper bits in that field for a dma-pinned count. "Sort of", means that, + rather than dividing page->_refcount into bit fields, we simple add a medium- + large value (GUP_PIN_COUNTING_BIAS, initially chosen to be 1024: 10 bits) to + page->_refcount. This provides fuzzy behavior: if a page has get_page() called + on it 1024 times, then it will appear to have a single dma-pinned count. + And again, that's acceptable. + +This also leads to limitations: there are only 31-10==21 bits available for a +counter that increments 10 bits at a time. + +* Callers must specifically request "dma-pinned tracking of pages". In other + words, just calling get_user_pages() will not suffice; a new set of functions, + pin_user_page() and related, must be used. + +FOLL_PIN, FOLL_GET, FOLL_LONGTERM: when to use which flags +========================================================== + +Thanks to Jan Kara, Vlastimil Babka and several other -mm people, for describing +these categories: + +CASE 1: Direct IO (DIO) +----------------------- +There are GUP references to pages that are serving +as DIO buffers. These buffers are needed for a relatively short time (so they +are not "long term"). No special synchronization with page_mkclean() or +munmap() is provided. Therefore, flags to set at the call site are: :: + + FOLL_PIN + +...but rather than setting FOLL_PIN directly, call sites should use one of +the pin_user_pages*() routines that set FOLL_PIN. + +CASE 2: RDMA +------------ +There are GUP references to pages that are serving as DMA +buffers. These buffers are needed for a long time ("long term"). No special +synchronization with page_mkclean() or munmap() is provided. Therefore, flags +to set at the call site are: :: + + FOLL_PIN | FOLL_LONGTERM + +NOTE: Some pages, such as DAX pages, cannot be pinned with longterm pins. That's +because DAX pages do not have a separate page cache, and so "pinning" implies +locking down file system blocks, which is not (yet) supported in that way. + +CASE 3: MMU notifier registration, with or without page faulting hardware +------------------------------------------------------------------------- +Device drivers can pin pages via get_user_pages*(), and register for mmu +notifier callbacks for the memory range. Then, upon receiving a notifier +"invalidate range" callback , stop the device from using the range, and unpin +the pages. There may be other possible schemes, such as for example explicitly +synchronizing against pending IO, that accomplish approximately the same thing. + +Or, if the hardware supports replayable page faults, then the device driver can +avoid pinning entirely (this is ideal), as follows: register for mmu notifier +callbacks as above, but instead of stopping the device and unpinning in the +callback, simply remove the range from the device's page tables. + +Either way, as long as the driver unpins the pages upon mmu notifier callback, +then there is proper synchronization with both filesystem and mm +(page_mkclean(), munmap(), etc). Therefore, neither flag needs to be set. + +CASE 4: Pinning for struct page manipulation only +------------------------------------------------- +If only struct page data (as opposed to the actual memory contents that a page +is tracking) is affected, then normal GUP calls are sufficient, and neither flag +needs to be set. + +CASE 5: Pinning in order to write to the data within the page +------------------------------------------------------------- +Even though neither DMA nor Direct IO is involved, just a simple case of "pin, +write to a page's data, unpin" can cause a problem. Case 5 may be considered a +superset of Case 1, plus Case 2, plus anything that invokes that pattern. In +other words, if the code is neither Case 1 nor Case 2, it may still require +FOLL_PIN, for patterns like this: + +Correct (uses FOLL_PIN calls): + pin_user_pages() + write to the data within the pages + unpin_user_pages() + +INCORRECT (uses FOLL_GET calls): + get_user_pages() + write to the data within the pages + put_page() + +page_maybe_dma_pinned(): the whole point of pinning +=================================================== + +The whole point of marking pages as "DMA-pinned" or "gup-pinned" is to be able +to query, "is this page DMA-pinned?" That allows code such as page_mkclean() +(and file system writeback code in general) to make informed decisions about +what to do when a page cannot be unmapped due to such pins. + +What to do in those cases is the subject of a years-long series of discussions +and debates (see the References at the end of this document). It's a TODO item +here: fill in the details once that's worked out. Meanwhile, it's safe to say +that having this available: :: + + static inline bool page_maybe_dma_pinned(struct page *page) + +...is a prerequisite to solving the long-running gup+DMA problem. + +Another way of thinking about FOLL_GET, FOLL_PIN, and FOLL_LONGTERM +=================================================================== + +Another way of thinking about these flags is as a progression of restrictions: +FOLL_GET is for struct page manipulation, without affecting the data that the +struct page refers to. FOLL_PIN is a *replacement* for FOLL_GET, and is for +short term pins on pages whose data *will* get accessed. As such, FOLL_PIN is +a "more severe" form of pinning. And finally, FOLL_LONGTERM is an even more +restrictive case that has FOLL_PIN as a prerequisite: this is for pages that +will be pinned longterm, and whose data will be accessed. + +Unit testing +============ +This file:: + + tools/testing/selftests/vm/gup_benchmark.c + +has the following new calls to exercise the new pin*() wrapper functions: + +* PIN_FAST_BENCHMARK (./gup_benchmark -a) +* PIN_BENCHMARK (./gup_benchmark -b) + +You can monitor how many total dma-pinned pages have been acquired and released +since the system was booted, via two new /proc/vmstat entries: :: + + /proc/vmstat/nr_foll_pin_acquired + /proc/vmstat/nr_foll_pin_released + +Under normal conditions, these two values will be equal unless there are any +long-term [R]DMA pins in place, or during pin/unpin transitions. + +* nr_foll_pin_acquired: This is the number of logical pins that have been + acquired since the system was powered on. For huge pages, the head page is + pinned once for each page (head page and each tail page) within the huge page. + This follows the same sort of behavior that get_user_pages() uses for huge + pages: the head page is refcounted once for each tail or head page in the huge + page, when get_user_pages() is applied to a huge page. + +* nr_foll_pin_released: The number of logical pins that have been released since + the system was powered on. Note that pages are released (unpinned) on a + PAGE_SIZE granularity, even if the original pin was applied to a huge page. + Becaused of the pin count behavior described above in "nr_foll_pin_acquired", + the accounting balances out, so that after doing this:: + + pin_user_pages(huge_page); + for (each page in huge_page) + unpin_user_page(page); + +...the following is expected:: + + nr_foll_pin_released == nr_foll_pin_acquired + +(...unless it was already out of balance due to a long-term RDMA pin being in +place.) + +Other diagnostics +================= + +dump_page() has been enhanced slightly, to handle these new counting fields, and +to better report on compound pages in general. Specifically, for compound pages +with order > 1, the exact (hpage_pinned_refcount) pincount is reported. + +References +========== + +* `Some slow progress on get_user_pages() (Apr 2, 2019) `_ +* `DMA and get_user_pages() (LPC: Dec 12, 2018) `_ +* `The trouble with get_user_pages() (Apr 30, 2018) `_ +* `LWN kernel index: get_user_pages() `_ + +John Hubbard, October, 2019 -- cgit v1.2.3