From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../bindings/arm/keystone/ti,k3-sci-common.yaml | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml (limited to 'Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml') diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml new file mode 100644 index 000000000..5cbcacaeb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common K3 TI-SCI bindings + +maintainers: + - Nishanth Menon + +description: | + The TI K3 family of SoCs usually have a central System Controller Processor + that is responsible for managing various SoC-level resources like clocks, + resets, interrupts etc. The communication with that processor is performed + through the TI-SCI protocol. + + Each specific device management node like a clock controller node, a reset + controller node or an interrupt-controller node should define a common set + of properties that enables them to implement the corresponding functionality + over the TI-SCI protocol. The following are some of the common properties + needed by such individual nodes. The required properties for each device + management node is defined in the respective binding. + +properties: + ti,sci: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Should be a phandle to the TI-SCI System Controller node + + ti,sci-dev-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Should contain the TI-SCI device id corresponding to the device. Please + refer to the corresponding System Controller documentation for valid + values for the desired device. + + ti,sci-proc-ids: + description: Should contain a single tuple of . + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: TI-SCI processor id for the remote processor device + - description: TI-SCI host id to which processor control ownership + should be transferred to + +additionalProperties: true -- cgit v1.2.3