From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../interrupt-controller/abilis,tb10x-ictl.txt | 37 +++ .../interrupt-controller/actions,owl-sirq.yaml | 65 +++++ .../interrupt-controller/al,alpine-msix.txt | 25 ++ .../allwinner,sun4i-a10-ic.yaml | 47 ++++ .../allwinner,sun7i-a20-sc-nmi.yaml | 71 ++++++ .../interrupt-controller/amazon,al-fic.txt | 27 ++ .../amlogic,meson-gpio-intc.txt | 37 +++ .../interrupt-controller/andestech,ativic32.txt | 19 ++ .../bindings/interrupt-controller/arm,gic-v3.yaml | 277 +++++++++++++++++++++ .../bindings/interrupt-controller/arm,gic.yaml | 235 +++++++++++++++++ .../bindings/interrupt-controller/arm,nvic.txt | 36 +++ .../arm,versatile-fpga-irq.txt | 36 +++ .../bindings/interrupt-controller/arm,vic.txt | 41 +++ .../interrupt-controller/aspeed,ast2400-i2c-ic.txt | 25 ++ .../interrupt-controller/aspeed,ast2400-vic.txt | 23 ++ .../interrupt-controller/aspeed,ast2xxx-scu-ic.txt | 23 ++ .../bindings/interrupt-controller/atmel,aic.txt | 43 ++++ .../brcm,bcm2835-armctrl-ic.txt | 131 ++++++++++ .../interrupt-controller/brcm,bcm2836-l1-intc.txt | 37 +++ .../interrupt-controller/brcm,bcm3380-l2-intc.txt | 39 +++ .../interrupt-controller/brcm,bcm6345-l1-intc.txt | 55 ++++ .../interrupt-controller/brcm,bcm7038-l1-intc.txt | 61 +++++ .../interrupt-controller/brcm,bcm7120-l2-intc.txt | 88 +++++++ .../bindings/interrupt-controller/brcm,l2-intc.txt | 31 +++ .../interrupt-controller/cdns,xtensa-mx.txt | 18 ++ .../interrupt-controller/cdns,xtensa-pic.txt | 25 ++ .../interrupt-controller/cirrus,clps711x-intc.txt | 41 +++ .../interrupt-controller/csky,apb-intc.txt | 62 +++++ .../bindings/interrupt-controller/csky,mpintc.txt | 52 ++++ .../bindings/interrupt-controller/digicolor-ic.txt | 21 ++ .../interrupt-controller/ezchip,nps400-ic.txt | 17 ++ .../interrupt-controller/faraday,ftintc010.txt | 25 ++ .../bindings/interrupt-controller/fsl,intmux.yaml | 68 +++++ .../interrupt-controller/fsl,irqsteer.yaml | 91 +++++++ .../interrupt-controller/fsl,ls-extirq.txt | 49 ++++ .../interrupt-controller/fsl,ls-scfg-msi.txt | 30 +++ .../interrupt-controller/google,goldfish-pic.txt | 30 +++ .../interrupt-controller/hisilicon,mbigen-v2.txt | 84 +++++++ .../bindings/interrupt-controller/img,pdc-intc.txt | 105 ++++++++ .../interrupt-controller/ingenic,intc.yaml | 65 +++++ .../interrupt-controller/intel,ce4100-ioapic.txt | 26 ++ .../intel,ixp4xx-interrupt.yaml | 56 +++++ .../bindings/interrupt-controller/interrupts.txt | 122 +++++++++ .../bindings/interrupt-controller/jcore,aic.txt | 26 ++ .../kontron,sl28cpld-intc.yaml | 54 ++++ .../interrupt-controller/loongson,htpic.yaml | 61 +++++ .../interrupt-controller/loongson,htvec.yaml | 57 +++++ .../interrupt-controller/loongson,liointc.yaml | 92 +++++++ .../interrupt-controller/loongson,ls1x-intc.txt | 24 ++ .../interrupt-controller/loongson,pch-msi.yaml | 62 +++++ .../interrupt-controller/loongson,pch-pic.yaml | 57 +++++ .../interrupt-controller/lsi,zevio-intc.txt | 18 ++ .../marvell,armada-370-xp-mpic.txt | 38 +++ .../interrupt-controller/marvell,armada-8k-pic.txt | 25 ++ .../bindings/interrupt-controller/marvell,gicp.txt | 27 ++ .../bindings/interrupt-controller/marvell,icu.txt | 112 +++++++++ .../marvell,odmi-controller.txt | 42 ++++ .../interrupt-controller/marvell,orion-intc.txt | 48 ++++ .../bindings/interrupt-controller/marvell,sei.txt | 36 +++ .../interrupt-controller/mediatek,cirq.txt | 33 +++ .../interrupt-controller/mediatek,sysirq.txt | 43 ++++ .../interrupt-controller/microchip,pic32-evic.txt | 67 +++++ .../bindings/interrupt-controller/mrvl,intc.yaml | 134 ++++++++++ .../interrupt-controller/mscc,ocelot-icpu-intr.txt | 21 ++ .../bindings/interrupt-controller/msi.txt | 135 ++++++++++ .../interrupt-controller/mstar,mst-intc.yaml | 64 +++++ .../bindings/interrupt-controller/mti,gic.yaml | 146 +++++++++++ .../interrupt-controller/nvidia,tegra20-ictlr.txt | 41 +++ .../interrupt-controller/nxp,lpc3220-mic.txt | 58 +++++ .../bindings/interrupt-controller/open-pic.txt | 97 ++++++++ .../interrupt-controller/opencores,or1k-pic.txt | 23 ++ .../interrupt-controller/openrisc,ompic.txt | 22 ++ .../interrupt-controller/qca,ath79-cpu-intc.txt | 44 ++++ .../interrupt-controller/qca,ath79-misc-intc.txt | 45 ++++ .../bindings/interrupt-controller/qcom,pdc.txt | 73 ++++++ .../interrupt-controller/rda,8810pl-intc.txt | 61 +++++ .../interrupt-controller/renesas,h8300h-intc.txt | 22 ++ .../interrupt-controller/renesas,h8s-intc.txt | 22 ++ .../interrupt-controller/renesas,intc-irqpin.yaml | 107 ++++++++ .../interrupt-controller/renesas,irqc.yaml | 88 +++++++ .../interrupt-controller/renesas,rza1-irqc.yaml | 80 ++++++ .../interrupt-controller/riscv,cpu-intc.txt | 52 ++++ .../samsung,exynos4210-combiner.txt | 50 ++++ .../interrupt-controller/samsung,s3c24xx-irq.txt | 53 ++++ .../interrupt-controller/sifive,plic-1.0.0.yaml | 97 ++++++++ .../interrupt-controller/sigma,smp8642-intc.txt | 48 ++++ .../interrupt-controller/snps,arc700-intc.txt | 24 ++ .../interrupt-controller/snps,archs-idu-intc.txt | 46 ++++ .../interrupt-controller/snps,archs-intc.txt | 22 ++ .../interrupt-controller/snps,dw-apb-ictl.txt | 43 ++++ .../socionext,synquacer-exiu.txt | 31 +++ .../socionext,uniphier-aidet.yaml | 61 +++++ .../interrupt-controller/st,spear3xx-shirq.txt | 44 ++++ .../interrupt-controller/st,sti-irq-syscfg.txt | 35 +++ .../interrupt-controller/st,stm32-exti.yaml | 98 ++++++++ .../interrupt-controller/technologic,ts4800.txt | 14 ++ .../interrupt-controller/ti,c64x+megamod-pic.txt | 103 ++++++++ .../bindings/interrupt-controller/ti,cp-intc.txt | 27 ++ .../interrupt-controller/ti,keystone-irq.txt | 36 +++ .../interrupt-controller/ti,omap-intc-irq.txt | 28 +++ .../interrupt-controller/ti,omap2-intc.txt | 27 ++ .../interrupt-controller/ti,omap4-wugen-mpu | 31 +++ .../interrupt-controller/ti,pruss-intc.yaml | 158 ++++++++++++ .../bindings/interrupt-controller/ti,sci-inta.yaml | 110 ++++++++ .../bindings/interrupt-controller/ti,sci-intr.yaml | 104 ++++++++ .../interrupt-controller/via,vt8500-intc.txt | 16 ++ 106 files changed, 6059 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/interrupts.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/msi.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/open-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml create mode 100644 Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller') diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt new file mode 100644 index 000000000..5a4dd263f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt @@ -0,0 +1,37 @@ +TB10x Top Level Interrupt Controller +==================================== + +The Abilis TB10x SOC contains a custom interrupt controller. It performs +one-to-one mapping of external interrupt sources to CPU interrupts and +provides support for reconfigurable trigger modes. + +Required properties +------------------- + +- compatible: Should be "abilis,tb10x-ictl" +- reg: specifies physical base address and size of register range. +- interrupt-congroller: Identifies the node as an interrupt controller. +- #interrupt cells: Specifies the number of cells used to encode an interrupt + source connected to this controller. The value shall be 2. +- interrupts: Specifies the list of interrupt lines which are handled by + the interrupt controller in the parent controller's notation. Interrupts + are mapped one-to-one to parent interrupts. + +Example +------- + +intc: interrupt-controller { /* Parent interrupt controller */ + interrupt-controller; + #interrupt-cells = <1>; /* For example below */ + /* ... */ +}; + +tb10x_ictl: pic@2000 { /* TB10x interrupt controller */ + compatible = "abilis,tb10x-ictl"; + reg = <0x2000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml new file mode 100644 index 000000000..5da333c64 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl SoCs SIRQ interrupt controller + +maintainers: + - Manivannan Sadhasivam + - Cristian Ciocaltea + +description: | + This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700 + and S900) and provides support for handling up to 3 external interrupt lines. + +properties: + compatible: + enum: + - actions,s500-sirq + - actions,s700-sirq + - actions,s900-sirq + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: + The first cell is the input IRQ number, between 0 and 2, while the second + cell is the trigger type as defined in interrupt.txt in this directory. + + 'interrupts': + description: | + Contains the GIC SPI IRQs mapped to the external interrupt lines. + They shall be specified sequentially from output 0 to 2. + minItems: 3 + maxItems: 3 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - 'interrupts' + +additionalProperties: false + +examples: + - | + #include + + sirq: interrupt-controller@b01b0200 { + compatible = "actions,s500-sirq"; + reg = <0xb01b0200 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , /* SIRQ0 */ + , /* SIRQ1 */ + ; /* SIRQ2 */ + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt new file mode 100644 index 000000000..5669764f9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt @@ -0,0 +1,25 @@ +Alpine MSIX controller + +See arm,gic-v3.txt for SPI and MSI definitions. + +Required properties: + +- compatible: should be "al,alpine-msix" +- reg: physical base address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- msi-controller: identifies the node as an PCI Message Signaled Interrupt + controller +- al,msi-base-spi: SPI base of the MSI frame +- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0 + +Example: + +msix: msix { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-parent = <&gic>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <160>; + al,msi-num-spis = <160>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml new file mode 100644 index 000000000..953d875b5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Interrupt Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + "#interrupt-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-ic + - allwinner,suniv-f1c100s-ic + + reg: + maxItems: 1 + + interrupt-controller: true + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupt-controller + +additionalProperties: false + +examples: + - | + intc: interrupt-controller@1c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml new file mode 100644 index 000000000..8acca0ae3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell the trigger + type as defined in interrupt.txt in this directory. + + compatible: + oneOf: + - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun6i-a31-sc-nmi + deprecated: true + - const: allwinner,sun7i-a20-sc-nmi + - items: + - const: allwinner,sun8i-a83t-r-intc + - const: allwinner,sun6i-a31-r-intc + - const: allwinner,sun9i-a80-nmi + - items: + - const: allwinner,sun50i-a64-r-intc + - const: allwinner,sun6i-a31-r-intc + - items: + - const: allwinner,sun50i-a100-nmi + - const: allwinner,sun9i-a80-nmi + - items: + - const: allwinner,sun50i-h6-r-intc + - const: allwinner,sun6i-a31-r-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupts + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + interrupt-controller@1c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt new file mode 100644 index 000000000..c676b03c7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt @@ -0,0 +1,27 @@ +Amazon's Annapurna Labs Fabric Interrupt Controller + +Required properties: + +- compatible: should be "amazon,al-fic" +- reg: physical base address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells : must be 2. Specifies the number of cells needed to encode + an interrupt source. Supported trigger types are low-to-high edge + triggered and active high level-sensitive. +- interrupts: describes which input line in the interrupt parent, this + fic's output is connected to. This field property depends on the parent's + binding + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + +amazon_fic: interrupt-controller@fd8a8500 { + compatible = "amazon,al-fic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0xfd8a8500 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt new file mode 100644 index 000000000..23b18b92c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -0,0 +1,37 @@ +Amlogic meson GPIO interrupt controller + +Meson SoCs contains an interrupt controller which is able to watch the SoC +pads and generate an interrupt on edge or level. The controller is essentially +a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge +or level and polarity. It does not expose all 256 mux inputs because the +documentation shows that the upper part is not mapped to any pad. The actual +number of interrupt exposed depends on the SoC. + +Required properties: + +- compatible : must have "amlogic,meson8-gpio-intc" and either + "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or + "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or + "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or + "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912) + "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X) + "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2) + "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3) + "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L) +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. +- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These + are the hwirqs used on the parent interrupt controller. + +Example: + +gpio_interrupt: interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + meson,channel-interrupts = <64 65 66 67 68 69 70 71>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt new file mode 100644 index 000000000..f4b4193d8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt @@ -0,0 +1,19 @@ +* Andestech Internal Vector Interrupt Controller + +The Internal Vector Interrupt Controller (IVIC) is a basic interrupt controller +suitable for a simpler SoC platform not requiring a more sophisticated and +bigger External Vector Interrupt Controller. + + +Main node required properties: + +- compatible : should at least contain "andestech,ativic32". +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells: 1 cells and refer to interrupt-controller/interrupts + +Examples: + intc: interrupt-controller { + compatible = "andestech,ativic32"; + #interrupt-cells = <1>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml new file mode 100644 index 000000000..1ecd1831c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller, version 3 + +maintainers: + - Marc Zyngier + +description: | + AArch64 SMP cores are often associated with a GICv3, providing Private + Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), + Software Generated Interrupts (SGI), and Locality-specific Peripheral + Interrupts (LPI). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-gic-v3 + - const: arm,gic-v3 + - const: arm,gic-v3 + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1, 2 ] + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + "#interrupt-cells": + description: | + Specifies the number of cells needed to encode an interrupt source. + Must be a single cell with a value of at least 3. + If the system requires describing PPI affinity, then the value must + be at least 4. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts, 2 for interrupts in the Extended SPI range, 3 for the + Extended PPI range. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. Extented SPI interrupts are in the range [0-1023]. + Extended PPI interrupts are in the range [0-127]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + The 4th cell is a phandle to a node describing a set of CPUs this + interrupt is affine to. The interrupt must be a PPI, and the node + pointed must be a subnode of the "ppi-partitions" subnode. For + interrupt types other than PPI or PPIs that are not partitionned, + this cell must be zero. See the "ppi-partitions" node description + below. + + Cells 5 and beyond are reserved for future use and must have a value + of 0 if present. + enum: [ 3, 4 ] + + reg: + description: | + Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + minItems: 2 + maxItems: 4096 # Should be enough? + + interrupts: + description: + Interrupt source of the VGIC maintenance interrupt. + maxItems: 1 + + redistributor-stride: + description: + If using padding pages, specifies the stride of consecutive + redistributors. Must be a multiple of 64kB. + $ref: /schemas/types.yaml#/definitions/uint64 + multipleOf: 0x10000 + exclusiveMinimum: 0 + + "#redistributor-regions": + description: + The number of independent contiguous regions occupied by the + redistributors. Required if more than one such region is present. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4096 + + msi-controller: + description: + Only present if the Message Based Interrupt functionnality is + being exposed by the HW, and the mbi-ranges property present. + + mbi-ranges: + description: + A list of pairs , where "intid" is the first SPI of a range + that can be used an MBI, and "span" the size of that range. Multiple + ranges can be provided. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + mbi-alias: + description: + Address property. Base address of an alias of the GICD region containing + only the {SET,CLR}SPI registers to be used if isolation is required, + and if supported by the HW. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 1 + maxItems: 2 + + ppi-partitions: + type: object + description: + PPI affinity can be expressed as a single "ppi-partitions" node, + containing a set of sub-nodes. + patternProperties: + "^interrupt-partition-[0-9]+$": + type: object + properties: + affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + required: + - affinity + +dependencies: + mbi-ranges: [ msi-controller ] + msi-controller: [ mbi-ranges ] + +required: + - compatible + - interrupts + - reg + +patternProperties: + "^gic-its@": false + "^interrupt-controller@[0-9a-f]+$": false + # msi-controller is preferred, but allow other names + "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": + type: object + description: + GICv3 has one or more Interrupt Translation Services (ITS) that are + used to route Message Signalled Interrupts (MSI) to the CPUs. + properties: + compatible: + const: arm,gic-v3-its + + msi-controller: true + + "#msi-cells": + description: + The single msi-cell is the DeviceID of the device which will generate + the MSI. + const: 1 + + reg: + description: + Specifies the base physical address and size of the ITS registers. + maxItems: 1 + + socionext,synquacer-pre-its: + description: + (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 + + required: + - compatible + - msi-controller + - "#msi-cells" + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x2f000000 0x10000>, // GICD + <0x2f100000 0x200000>, // GICR + <0x2c000000 0x2000>, // GICC + <0x2c010000 0x2000>, // GICH + <0x2c020000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller; + mbi-ranges = <256 128>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + }; + + interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x2c010000 0x10000>, // GICD + <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 + <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 + <0x2c040000 0x2000>, // GICC + <0x2c060000 0x2000>, // GICH + <0x2c080000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + + msi-controller@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c400000 0x20000>; + }; + + ppi-partitions { + part0: interrupt-partition-0 { + affinity = <&cpu0 &cpu2>; + }; + + part1: interrupt-partition-1 { + affinity = <&cpu1 &cpu3>; + }; + }; + }; + + + device@0 { + reg = <0 4>; + interrupts = <1 1 4 &part0>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml new file mode 100644 index 000000000..06889963d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller v1 and v2 + +maintainers: + - Marc Zyngier + +description: |+ + ARM SMP cores are often associated with a GIC, providing per processor + interrupts (PPI), shared processor interrupts (SPI) and software + generated interrupts (SGI). + + Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. + Secondary GICs are cascaded into the upward interrupt controller and do not + have PPIs or SGIs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,arm11mp-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic + - arm,cortex-a5-gic + - arm,cortex-a9-gic + - arm,eb11mp-gic + - arm,gic-400 + - arm,pl390 + - arm,tc11mp-gic + - nvidia,tegra210-agic + - qcom,msm-8660-qgic + - qcom,msm-qgic2 + + - items: + - const: arm,gic-400 + - enum: + - arm,cortex-a15-gic + - arm,cortex-a7-gic + + - items: + - const: arm,arm1176jzf-devchip-gic + - const: arm,arm11mp-gic + + - items: + - const: brcm,brahma-b15-gic + - const: arm,cortex-a15-gic + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1 ] + "#size-cells": + const: 1 + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered (invalid for SPIs) + 4 = active high level-sensitive + 8 = active low level-sensitive (invalid for SPIs). + bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of + the 8 possible cpus attached to the GIC. A bit set to '1' indicated + the interrupt is wired to that CPU. Only valid for PPI interrupts. + Also note that the configurability of PPI interrupts is IMPLEMENTATION + DEFINED and as such not guaranteed to be present (most SoC available + in 2014 seem to ignore the setting of this flag and use the hardware + default value). + + reg: + description: | + Specifies base physical address(s) and size of the GIC registers. The + first region is the GIC distributor register base and size. The 2nd region + is the GIC cpu interface register base and size. + + For GICv2 with virtualization extensions, additional regions are + required for specifying the base physical address and size of the VGIC + registers. The first additional region is the GIC virtual interface + control register base and size. The 2nd additional region is the GIC + virtual cpu interface register base and size. + minItems: 2 + maxItems: 4 + + ranges: true + + interrupts: + description: Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintenance interrupt on primary GIC (see + below). + maxItems: 1 + + cpu-offset: + description: per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset + is cpu-offset * cpu-nr. + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + description: List of names for the GIC clock input(s). Valid clock names + depend on the GIC variant. + oneOf: + - const: ic_clk # for "arm,arm11mp-gic" + - const: PERIPHCLKEN # for "arm,cortex-a15-gic" + - items: # for "arm,cortex-a9-gic" + - const: PERIPHCLK + - const: PERIPHCLKEN + - const: clk # for "arm,gic-400" and "nvidia,tegra210" + - const: gclk #for "arm,pl390" + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^v2m@[0-9a-f]+$": + type: object + description: | + * GICv2m extension for MSI/MSI-x support (Optional) + + Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). + This is enabled by specifying v2m sub-node(s). + + properties: + compatible: + const: arm,gic-v2m-frame + + msi-controller: true + + reg: + maxItems: 1 + description: GICv2m MSI interface register base and size + + arm,msi-base-spi: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the SPI base of the MSI frame, overriding + the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + arm,msi-num-spis: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the number of SPIs assigned to the + frame, overriding the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - msi-controller + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + // GICv1 + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + - | + // GICv2 + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x2000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + - | + // GICv2m extension for MSI/MSI-x support + interrupt-controller@e1101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + interrupts = <1 8 0xf04>; + ranges = <0 0xe1100000 0x100000>; + reg = <0xe1110000 0x01000>, + <0xe112f000 0x02000>, + <0xe1140000 0x10000>, + <0xe1160000 0x10000>; + + v2m0: v2m@80000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x80000 0x1000>; + }; + + //... + + v2mN: v2m@90000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x90000 0x1000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt new file mode 100644 index 000000000..386ab37a3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt @@ -0,0 +1,36 @@ +* ARM Nested Vector Interrupt Controller (NVIC) + +The NVIC provides an interrupt controller that is tightly coupled to +Cortex-M based processor cores. The NVIC implemented on different SoCs +vary in the number of interrupts and priority bits per interrupt. + +Main node required properties: + +- compatible : should be one of: + "arm,v6m-nvic" + "arm,v7m-nvic" + "arm,v8m-nvic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + The 1st cell contains the interrupt number for the interrupt type. + + The 2nd cell is the priority of the interrupt. + +- reg : Specifies base physical address(s) and size of the NVIC registers. + This is at a fixed address (0xe000e100) and size (0xc00). + +- arm,num-irq-priority-bits: The number of priority bits implemented by the + given SoC + +Example: + + intc: interrupt-controller@e000e100 { + compatible = "arm,v7m-nvic"; + #interrupt-cells = <2>; + #address-cells = <1>; + interrupt-controller; + reg = <0xe000e100 0xc00>; + arm,num-irq-priority-bits = <4>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt new file mode 100644 index 000000000..2a1d16bdf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt @@ -0,0 +1,36 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; + +Optional properties: +- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ + output is simply connected to the input of another IRQ controller, + then the parent IRQ shall be specified in this property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt new file mode 100644 index 000000000..dd527216c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt @@ -0,0 +1,41 @@ +* ARM Vectored Interrupt Controller + +One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM +system for interrupt routing. For multiple controllers they can either be +nested or have the outputs wire-OR'd together. + +Required properties: + +- compatible : should be one of + "arm,pl190-vic" + "arm,pl192-vic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : The number of cells to define the interrupts. Must be 1 as + the VIC has no configuration options for interrupt sources. The cell is a u32 + and defines the interrupt number. +- reg : The register bank for the VIC. + +Optional properties: + +- interrupts : Interrupt source for parent controllers if the VIC is nested. +- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit + represents single interrupt source, starting from source 0 at LSb and ending + at source 31 at MSb. A bit that is set means that the source is wired and + clear means otherwise. If unspecified, defaults to all valid. +- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be + configured as wake up source for the system. Order of bits is the same as for + valid-mask property. A set bit means that this interrupt source can be + configured as a wake up source for the system. If unspecied, defaults to all + interrupt sources configurable as wake up sources. + +Example: + + vic0: interrupt-controller@60000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000 0x1000>; + + valid-mask = <0xffffff7f>; + valid-wakeup-mask = <0x0000ff7f>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt new file mode 100644 index 000000000..033cc82e5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt @@ -0,0 +1,25 @@ +Device tree configuration for the I2C Interrupt Controller on the AST24XX and +AST25XX SoCs. + +Required Properties: +- #address-cells : should be 1 +- #size-cells : should be 1 +- #interrupt-cells : should be 1 +- compatible : should be "aspeed,ast2400-i2c-ic" + or "aspeed,ast2500-i2c-ic" +- reg : address start and range of controller +- interrupts : interrupt number +- interrupt-controller : denotes that the controller receives and fires + new interrupts for child busses + +Example: + +i2c_ic: interrupt-controller@0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + compatible = "aspeed,ast2400-i2c-ic"; + reg = <0x0 0x40>; + interrupts = <12>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt new file mode 100644 index 000000000..e3fea0758 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt @@ -0,0 +1,23 @@ +Aspeed Vectored Interrupt Controller + +These bindings are for the Aspeed interrupt controller. The AST2400 and +AST2500 SoC families include a legacy register layout before a re-designed +layout, but the bindings do not prescribe the use of one or the other. + +Required properties: + +- compatible : "aspeed,ast2400-vic" + "aspeed,ast2500-vic" + +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +Example: + + vic: interrupt-controller@1e6c0080 { + compatible = "aspeed,ast2400-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1e6c0080 0x80>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt new file mode 100644 index 000000000..251ed4417 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt @@ -0,0 +1,23 @@ +Aspeed AST25XX and AST26XX SCU Interrupt Controller + +Required Properties: + - #interrupt-cells : must be 1 + - compatible : must be "aspeed,ast2500-scu-ic", + "aspeed,ast2600-scu-ic0" or + "aspeed,ast2600-scu-ic1" + - interrupts : interrupt from the parent controller + - interrupt-controller : indicates that the controller receives and + fires new interrupts for child busses + +Example: + + syscon@1e6e2000 { + ranges = <0 0x1e6e2000 0x1a8>; + + scu_ic: interrupt-controller@18 { + #interrupt-cells = <1>; + compatible = "aspeed,ast2500-scu-ic"; + interrupts = <21>; + interrupt-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt new file mode 100644 index 000000000..7079d44bf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt @@ -0,0 +1,43 @@ +* Advanced Interrupt Controller (AIC) + +Required properties: +- compatible: Should be: + - "atmel,-aic" where can be "at91rm9200", "sama5d2", + "sama5d3" or "sama5d4" + - "microchip,-aic" where can be "sam9x60" + +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. It should be 3. + The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + Default flag for internal sources should be set to 4 (active high). + The third cell is used to specify the irq priority from 0 (lowest) to 7 + (highest). +- reg: Should contain AIC registers location and length +- atmel,external-irqs: u32 array of external irqs. + +Examples: + /* + * AIC + */ + aic: interrupt-controller@fffff000 { + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xfffff000 0x200>; + }; + + /* + * An interrupt generating device that is wired to an AIC. + */ + dma: dma-controller@ffffec00 { + compatible = "atmel,at91sam9g45-dma"; + reg = <0xffffec00 0x200>; + interrupts = <21 4 5>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt new file mode 100644 index 000000000..0f1af5a1c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -0,0 +1,131 @@ +BCM2835 Top-Level ("ARMCTRL") Interrupt Controller + +The BCM2835 contains a custom top-level interrupt controller, which supports +72 interrupt sources using a 2-level register scheme. The interrupt +controller, or the HW block containing it, is referred to occasionally +as "armctrl" in the SoC documentation, hence naming of this binding. + +The BCM2836 contains the same interrupt controller with the same +interrupts, but the per-CPU interrupt controller is the root, and an +interrupt there indicates that the ARMCTRL has an interrupt to handle. + +Required properties: + +- compatible : should be "brcm,bcm2835-armctrl-ic" or + "brcm,bcm2836-armctrl-ic" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + + The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic + pending" register, or 1/2 respectively for interrupts in the "IRQ pending + 1/2" register. + + The 2nd cell contains the interrupt number within the bank. Valid values + are 0..7 for bank 0, and 0..31 for bank 1. + +Additional required properties for brcm,bcm2836-armctrl-ic: +- interrupts : Specifies the interrupt on the parent for this interrupt + controller to handle. + +The interrupt sources are as follows: + +Bank 0: +0: ARM_TIMER +1: ARM_MAILBOX +2: ARM_DOORBELL_0 +3: ARM_DOORBELL_1 +4: VPU0_HALTED +5: VPU1_HALTED +6: ILLEGAL_TYPE0 +7: ILLEGAL_TYPE1 + +Bank 1: +0: TIMER0 +1: TIMER1 +2: TIMER2 +3: TIMER3 +4: CODEC0 +5: CODEC1 +6: CODEC2 +7: VC_JPEG +8: ISP +9: VC_USB +10: VC_3D +11: TRANSPOSER +12: MULTICORESYNC0 +13: MULTICORESYNC1 +14: MULTICORESYNC2 +15: MULTICORESYNC3 +16: DMA0 +17: DMA1 +18: VC_DMA2 +19: VC_DMA3 +20: DMA4 +21: DMA5 +22: DMA6 +23: DMA7 +24: DMA8 +25: DMA9 +26: DMA10 +27: DMA11-14 - shared interrupt for DMA 11 to 14 +28: DMAALL - triggers on all dma interrupts (including chanel 15) +29: AUX +30: ARM +31: VPUDMA + +Bank 2: +0: HOSTPORT +1: VIDEOSCALER +2: CCP2TX +3: SDC +4: DSI0 +5: AVE +6: CAM0 +7: CAM1 +8: HDMI0 +9: HDMI1 +10: PIXELVALVE1 +11: I2CSPISLV +12: DSI1 +13: PWA0 +14: PWA1 +15: CPR +16: SMI +17: GPIO0 +18: GPIO1 +19: GPIO2 +20: GPIO3 +21: VC_I2C +22: VC_SPI +23: VC_I2SPCM +24: VC_SDIO +25: VC_UART +26: SLIMBUS +27: VEC +28: CPG +29: RNG +30: VC_ARASANSDIO +31: AVSPMON + +Example: + +/* BCM2835, first level */ +intc: interrupt-controller { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +/* BCM2836, second level */ +intc: interrupt-controller { + compatible = "brcm,bcm2836-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&local_intc>; + interrupts = <8>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt new file mode 100644 index 000000000..8ced1696c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt @@ -0,0 +1,37 @@ +BCM2836 per-CPU interrupt controller + +The BCM2836 has a per-cpu interrupt controller for the timer, PMU +events, and SMP IPIs. One of the CPUs may receive interrupts for the +peripheral (GPU) events, which chain to the BCM2835-style interrupt +controller. + +Required properties: + +- compatible: Should be "brcm,bcm2836-l1-intc" +- reg: Specifies base physical address and size of the + registers +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2 + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +The interrupt sources are as follows: + +0: CNTPSIRQ +1: CNTPNSIRQ +2: CNTHPIRQ +3: CNTVIRQ +8: GPU_FAST +9: PMU_FAST + +Example: + +local_intc: local_intc { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&local_intc>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt new file mode 100644 index 000000000..37aea40d5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt @@ -0,0 +1,39 @@ +Broadcom BCM3380-style Level 1 / Level 2 interrupt controller + +This interrupt controller shows up in various forms on many BCM338x/BCM63xx +chipsets. It has the following properties: + +- outputs a single interrupt signal to its interrupt controller parent + +- contains one or more enable/status word pairs, which often appear at + different offsets in different blocks + +- no atomic set/clear operations + +Required properties: + +- compatible: should be "brcm,bcm3380-l2-intc" +- reg: specifies one or more enable/status pairs, in the following format: + ... +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupts: specifies the interrupt line in the interrupt-parent controller + node, valid values depend on the type of parent interrupt controller + +Optional properties: + +- brcm,irq-can-wake: if present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +Example: + +irq0_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt new file mode 100644 index 000000000..2bc19b1ac --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt @@ -0,0 +1,55 @@ +Broadcom BCM6345-style Level 1 interrupt controller + +This block is a first level interrupt controller that is typically connected +directly to one of the HW INT lines on each CPU. + +Key elements of the hardware design include: + +- 32, 64 or 128 incoming level IRQ lines + +- Most onchip peripherals are wired directly to an L1 input + +- A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + +- Contains one or more enable/status word pairs per CPU + +- No atomic set/clear operations + +- No polarity/level/edge settings + +- No FIFO or priority encoder logic; software is expected to read all + 2-4 status words to determine which IRQs are pending + +Required properties: + +- compatible: should be "brcm,bcm-l1-intc", "brcm,bcm6345-l1-intc" +- reg: specifies the base physical address and size of the registers; + the number of supported IRQs is inferred from the size argument +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node; valid values depend on the type of parent interrupt controller + +If multiple reg ranges and interrupt-parent entries are present on an SMP +system, the driver will allow IRQ SMP affinity to be set up through the +/proc/irq/ interface. In the simplest possible configuration, only one +reg range and one interrupt-parent is needed. + +The driver operates in native CPU endian by default, there is no support for +specifying an alternative endianness. + +Example: + +periph_intc: interrupt-controller@10000000 { + compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x20>, + <0x10000040 0x20>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt new file mode 100644 index 000000000..5ddef1dc0 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt @@ -0,0 +1,61 @@ +Broadcom BCM7038-style Level 1 interrupt controller + +This block is a first level interrupt controller that is typically connected +directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip +since BCM7038 has contained this hardware. + +Key elements of the hardware design include: + +- 64, 96, 128, or 160 incoming level IRQ lines + +- Most onchip peripherals are wired directly to an L1 input + +- A separate instance of the register set for each CPU, allowing individual + peripheral IRQs to be routed to any CPU + +- Atomic mask/unmask operations + +- No polarity/level/edge settings + +- No FIFO or priority encoder logic; software is expected to read all + 2-5 status words to determine which IRQs are pending + +Required properties: + +- compatible: should be "brcm,bcm7038-l1-intc" +- reg: specifies the base physical address and size of the registers; + the number of supported IRQs is inferred from the size argument +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node; valid values depend on the type of parent interrupt controller + +Optional properties: + +- brcm,irq-can-wake: If present, this means the L1 controller can be used as a + wakeup source for system suspend/resume. + +Optional properties: + +- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts + have already been configured by the firmware and should be left unmanaged. + This should have one 32-bit word per status/set/clear/mask group. + +If multiple reg ranges and interrupt-parent entries are present on an SMP +system, the driver will allow IRQ SMP affinity to be set up through the +/proc/irq/ interface. In the simplest possible configuration, only one +reg range and one interrupt-parent is needed. + +Example: + +periph_intc: periph_intc@1041a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x1041a400 0x30 0x1041a600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt new file mode 100644 index 000000000..addd86b6c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt @@ -0,0 +1,88 @@ +Broadcom BCM7120-style Level 2 interrupt controller + +This interrupt controller hardware is a second level interrupt controller that +is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based +platforms. It can be found on BCM7xxx products starting with BCM7120. + +Such an interrupt controller has the following hardware design: + +- outputs multiple interrupts signals towards its interrupt controller parent + +- controls how some of the interrupts will be flowing, whether they will + directly output an interrupt signal towards the interrupt controller parent, + or if they will output an interrupt signal at this 2nd level interrupt + controller, in particular for UARTs + +- has one 32-bit enable word and one 32-bit status word + +- no atomic set/clear operations + +- not all bits within the interrupt controller actually map to an interrupt + +The typical hardware layout for this controller is represented below: + +2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC) + +0 -----[ MUX ] ------------|==========> GIC interrupt 75 + \-----------\ + | +1 -----[ MUX ] --------)---|==========> GIC interrupt 76 + \------------| + | +2 -----[ MUX ] --------)---|==========> GIC interrupt 77 + \------------| + | +3 ---------------------| +4 ---------------------| +5 ---------------------| +7 ---------------------|---|===========> GIC interrupt 66 +9 ---------------------| +10 --------------------| +11 --------------------/ + +6 ------------------------\ + |===========> GIC interrupt 64 +8 ------------------------/ + +12 ........................ X +13 ........................ X (not connected) +.. +31 ........................ X + +Required properties: + +- compatible: should be "brcm,bcm7120-l2-intc" +- reg: specifies the base physical address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupts: specifies the interrupt line(s) in the interrupt-parent controller + node, valid values depend on the type of parent interrupt controller +- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts + are wired to this 2nd level interrupt controller, and how they match their + respective interrupt parents. Should match exactly the number of interrupts + specified in the 'interrupts' property. + +Optional properties: + +- brcm,irq-can-wake: if present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which + have a mux gate, typically UARTs. Setting these bits will make their + respective interrupt outputs bypass this 2nd level interrupt controller + completely; it is completely transparent for the interrupt controller + parent. This should have one 32-bit word per enable/status pair. + +Example: + +irq0_intc: interrupt-controller@f0406800 { + compatible = "brcm,bcm7120-l2-intc"; + interrupt-parent = <&intc>; + #interrupt-cells = <1>; + reg = <0xf0406800 0x8>; + interrupt-controller; + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>; + brcm,int-map-mask = <0xeb8>, <0x140>; + brcm,int-fwd-mask = <0x7>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt new file mode 100644 index 000000000..021cf8223 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt @@ -0,0 +1,31 @@ +Broadcom Generic Level 2 Interrupt Controller + +Required properties: + +- compatible: should be one of: + "brcm,hif-spi-l2-intc" or + "brcm,upg-aux-aon-l2-intc" or + "brcm,l2-intc" for latched interrupt controllers + should be "brcm,bcm7271-l2-intc" for level interrupt controllers +- reg: specifies the base physical address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. Should be 1. +- interrupts: specifies the interrupt line in the interrupt-parent irq space + to be used for cascading + +Optional properties: + +- brcm,irq-can-wake: If present, this means the L2 controller can be used as a + wakeup source for system suspend/resume. + +Example: + +hif_intr2_intc: interrupt-controller@f0441000 { + compatible = "brcm,l2-intc"; + reg = <0xf0441000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x20 0x0>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt new file mode 100644 index 000000000..d4de980e5 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt @@ -0,0 +1,18 @@ +* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX) + +Required properties: +- compatible: Should be "cdns,xtensa-mx". + +Remaining properties have exact same meaning as in Xtensa PIC +(see cdns,xtensa-pic.txt). + +Examples: + pic: pic { + compatible = "cdns,xtensa-mx"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #interrupt-cells = <2>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt new file mode 100644 index 000000000..026ef4cfc --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt @@ -0,0 +1,25 @@ +* Xtensa built-in Programmable Interrupt Controller (PIC) + +Required properties: +- compatible: Should be "cdns,xtensa-pic". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. + It may be either 1 or 2. + When it's 1, the first cell is the internal IRQ number. + When it's 2, the first cell is the IRQ number, and the second cell + specifies whether it's internal (0) or external (1). + Periferals are usually connected to a fixed external IRQ, but for different + core variants it may be mapped to different internal IRQ. + IRQ sensitivity and priority are fixed for each core variant and may not be + changed at runtime. + +Examples: + pic: pic { + compatible = "cdns,xtensa-pic"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #interrupt-cells = <2>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt new file mode 100644 index 000000000..969b4582e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt @@ -0,0 +1,41 @@ +Cirrus Logic CLPS711X Interrupt Controller + +Required properties: + +- compatible: Should be "cirrus,ep7209-intc". +- reg: Specifies base physical address of the registers set. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +The interrupt sources are as follows: +ID Name Description +--------------------------- +1: BLINT Battery low (FIQ) +3: MCINT Media changed (FIQ) +4: CSINT CODEC sound +5: EINT1 External 1 +6: EINT2 External 2 +7: EINT3 External 3 +8: TC1OI TC1 under flow +9: TC2OI TC2 under flow +10: RTCMI RTC compare match +11: TINT 64Hz tick +12: UTXINT1 UART1 transmit FIFO half empty +13: URXINT1 UART1 receive FIFO half full +14: UMSINT UART1 modem status changed +15: SSEOTI SSI1 end of transfer +16: KBDINT Keyboard +17: SS2RX SSI2 receive FIFO half or greater full +18: SS2TX SSI2 transmit FIFO less than half empty +28: UTXINT2 UART2 transmit FIFO half empty +29: URXINT2 UART2 receive FIFO half full +32: DAIINT DAI interface (FIQ) + +Example: + intc: interrupt-controller { + compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc"; + reg = <0x80000000 0x4000>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt new file mode 100644 index 000000000..44286dcba --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt @@ -0,0 +1,62 @@ +============================== +C-SKY APB Interrupt Controller +============================== + +C-SKY APB Interrupt Controller is a simple soc interrupt controller +on the apb bus and we only use it as root irq controller. + + - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums. + - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported. + - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums. + +============================= +intc node bindings definition +============================= + + Description: Describes APB interrupt controller + + PROPERTIES + + - compatible + Usage: required + Value type: + Definition: must be "csky,apb-intc" + "csky,dual-apb-intc" + "csky,gx6605s-intc" + - #interrupt-cells + Usage: required + Value type: + Definition: must be <1> + - reg + Usage: required + Value type: + Definition: in soc from cpu view + - interrupt-controller: + Usage: required + - csky,support-pulse-signal: + Usage: select + Description: to support pulse signal flag + +Examples: +--------- + + intc: interrupt-controller@500000 { + compatible = "csky,apb-intc"; + #interrupt-cells = <1>; + reg = <0x00500000 0x400>; + interrupt-controller; + }; + + intc: interrupt-controller@500000 { + compatible = "csky,dual-apb-intc"; + #interrupt-cells = <1>; + reg = <0x00500000 0x400>; + interrupt-controller; + }; + + intc: interrupt-controller@500000 { + compatible = "csky,gx6605s-intc"; + #interrupt-cells = <1>; + reg = <0x00500000 0x400>; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt new file mode 100644 index 000000000..e6bbcae4d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt @@ -0,0 +1,52 @@ +=========================================== +C-SKY Multi-processors Interrupt Controller +=========================================== + +C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860 +SMP soc, and it also could be used in non-SMP system. + +Interrupt number definition: + 0-15 : software irq, and we use 15 as our IPI_IRQ. + 16-31 : private irq, and we use 16 as the co-processor timer. + 31-1024: common irq for soc ip. + +Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h) + IRQ_TYPE_LEVEL_HIGH (default) + IRQ_TYPE_LEVEL_LOW + IRQ_TYPE_EDGE_RISING + IRQ_TYPE_EDGE_FALLING + +============================= +intc node bindings definition +============================= + + Description: Describes SMP interrupt controller + + PROPERTIES + + - compatible + Usage: required + Value type: + Definition: must be "csky,mpintc" + - #interrupt-cells + Usage: required + Value type: + Definition: <2> + - interrupt-controller: + Usage: required + +Examples: ("interrupts = ") +--------- +#include + + intc: interrupt-controller { + compatible = "csky,mpintc"; + #interrupt-cells = <2>; + interrupt-controller; + }; + + device: device-example { + ... + interrupts = <34 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt new file mode 100644 index 000000000..42d41ec84 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt @@ -0,0 +1,21 @@ +Conexant Digicolor Interrupt Controller + +Required properties: + +- compatible : should be "cnxt,cx92755-ic" +- reg : Specifies base physical address and size of the interrupt controller + registers (IC) area +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- syscon: A phandle to the syscon node describing UC registers + +Example: + + intc: interrupt-controller@f0000040 { + compatible = "cnxt,cx92755-ic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf0000040 0x40>; + syscon = <&uc_regs>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt new file mode 100644 index 000000000..888b2b9f7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt @@ -0,0 +1,17 @@ +EZchip NPS Interrupt Controller + +Required properties: + +- compatible : should be "ezchip,nps400-ic" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + + +Example: + +intc: interrupt-controller { + compatible = "ezchip,nps400-ic"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt new file mode 100644 index 000000000..24428d47f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt @@ -0,0 +1,25 @@ +* Faraday Technologt FTINTC010 interrupt controller + +This interrupt controller is a stock IP block from Faraday Technology found +in the Gemini SoCs and other designs. + +Required properties: +- compatible: must be one of + "faraday,ftintc010" + "cortina,gemini-interrupt-controller" (deprecated) +- reg: The register bank for the interrupt controller. +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. + Must be 2 as the controller can specify level or rising edge + IRQs. The bindings follows the standard binding for controllers + with two cells specified in + interrupt-controller/interrupts.txt + +Example: + +interrupt-controller@48000000 { + compatible = "faraday,ftintc010" + reg = <0x48000000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml new file mode 100644 index 000000000..43c6effbb --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale INTMUX interrupt multiplexer + +maintainers: + - Joakim Zhang + +properties: + compatible: + const: fsl,imx-intmux + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + description: | + Should contain the parent interrupt lines (up to 8) used to multiplex + the input interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + description: | + The 1st cell is hw interrupt number, the 2nd cell is channel index. + + clocks: + description: ipg clock. + + clock-names: + const: ipg + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + interrupt-controller@37400000 { + compatible = "fsl,imx-intmux"; + reg = <0x37400000 0x1000>; + interrupts = <0 16 4>, + <0 17 4>, + <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>, + <0 23 4>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + clocks = <&clk>; + clock-names = "ipg"; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml new file mode 100644 index 000000000..3b11a1a15 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IRQSTEER Interrupt Multiplexer + +maintainers: + - Lucas Stach + +properties: + compatible: + oneOf: + - const: fsl,imx-irqsteer + - items: + - const: fsl,imx8m-irqsteer + - const: fsl,imx-irqsteer + + reg: + maxItems: 1 + + interrupts: + description: | + should contain the up to 8 parent interrupt lines used to multiplex + the input interrupts. They should be specified sequentially from + output 0 to 7. + items: + - description: output interrupt 0 + - description: output interrupt 1 + - description: output interrupt 2 + - description: output interrupt 3 + - description: output interrupt 4 + - description: output interrupt 5 + - description: output interrupt 6 + - description: output interrupt 7 + minItems: 1 + maxItems: 8 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + fsl,channel: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + u32 value representing the output channel that all input IRQs should be + steered into. + + fsl,num-irqs: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: | + u32 value representing the number of input interrupts of this channel, + should be multiple of 32 input interrupts and up to 512 interrupts. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - interrupt-controller + - "#interrupt-cells" + - fsl,channel + - fsl,num-irqs + +additionalProperties: false + +examples: + - | + #include + #include + + interrupt-controller@32e2d000 { + compatible = "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,num-irqs = <64>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt new file mode 100644 index 000000000..f0ad7801e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt @@ -0,0 +1,49 @@ +* Freescale Layerscape external IRQs + +Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting +the polarity of certain external interrupt lines. + +The device node must be a child of the node representing the +Supplemental Configuration Unit (SCFG). + +Required properties: +- compatible: should be "fsl,-extirq", e.g. "fsl,ls1021a-extirq". +- #interrupt-cells: Must be 2. The first element is the index of the + external interrupt line. The second element is the trigger type. +- #address-cells: Must be 0. +- interrupt-controller: Identifies the node as an interrupt controller +- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in + the SCFG. +- interrupt-map: Specifies the mapping from external interrupts to GIC + interrupts. +- interrupt-map-mask: Must be <0xffffffff 0>. + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + + + interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <&extirq 1 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt new file mode 100644 index 000000000..454ce04d6 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -0,0 +1,30 @@ +* Freescale Layerscape SCFG PCIe MSI controller + +Required properties: + +- compatible: should be "fsl,-msi" to identify + Layerscape PCIe MSI controller block such as: + "fsl,ls1021a-msi" + "fsl,ls1043a-msi" + "fsl,ls1046a-msi" + "fsl,ls1043a-v1.1-msi" + "fsl,ls1012a-msi" +- msi-controller: indicates that this is a PCIe MSI controller node +- reg: physical base address of the controller and length of memory mapped. +- interrupts: an interrupt to the parent interrupt controller. + +This interrupt controller hardware is a second level interrupt controller that +is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based +platforms. If interrupt-parent is not provided, the default parent interrupt +controller will be used. +Each PCIe node needs to have property msi-parent that points to +MSI controller node + +Examples: + + msi1: msi-controller@1571000 { + compatible = "fsl,ls1043a-msi"; + reg = <0x0 0x1571000 0x0 0x8>, + msi-controller; + interrupts = <0 116 0x4>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt new file mode 100644 index 000000000..35f752706 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt @@ -0,0 +1,30 @@ +Android Goldfish PIC + +Android Goldfish programmable interrupt device used by Android +emulator. + +Required properties: + +- compatible : should contain "google,goldfish-pic" +- reg : +- interrupts : + +Example for mips when used in cascade mode: + + cpuintc { + #interrupt-cells = <0x1>; + #address-cells = <0>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + interrupt-controller@1f000000 { + compatible = "google,goldfish-pic"; + reg = <0x1f000000 0x1000>; + + interrupt-controller; + #interrupt-cells = <0x1>; + + interrupt-parent = <&cpuintc>; + interrupts = <0x2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt new file mode 100644 index 000000000..a6813a071 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt @@ -0,0 +1,84 @@ +Hisilicon mbigen device tree bindings. +======================================= + +Mbigen means: message based interrupt generator. + +MBI is kind of msi interrupt only used on Non-PCI devices. + +To reduce the wired interrupt number connected to GIC, +Hisilicon designed mbigen to collect and generate interrupt. + + +Non-pci devices can connect to mbigen and generate the +interrupt by writing ITS register. + +The mbigen chip and devices connect to mbigen have the following properties: + +Mbigen main node required properties: +------------------------------------------- +- compatible: Should be "hisilicon,mbigen-v2" + +- reg: Specifies the base physical address and size of the Mbigen + registers. + +Mbigen sub node required properties: +------------------------------------------ +- interrupt controller: Identifies the node as an interrupt controller + +- msi-parent: Specifies the MSI controller this mbigen use. + For more detail information,please refer to the generic msi-parent binding in + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + +- num-pins: the total number of pins implemented in this Mbigen + instance. + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + + The 1st cell is hardware pin number of the interrupt.This number is local to + each mbigen chip and in the range from 0 to the maximum interrupts number + of the mbigen. + + The 2nd cell is the interrupt trigger type. + The value of this cell should be: + 1: rising edge triggered + or + 4: high level triggered + +Examples: + + mbigen_chip_dsa { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xc0080000 0x0 0x10000>; + + mbigen_gmac:intc_gmac { + interrupt-controller; + msi-parent = <&its_dsa 0x40b1c>; + num-pins = <9>; + #interrupt-cells = <2>; + }; + + mbigen_i2c:intc_i2c { + interrupt-controller; + msi-parent = <&its_dsa 0x40b0e>; + num-pins = <2>; + #interrupt-cells = <2>; + }; + }; + +Devices connect to mbigen required properties: +---------------------------------------------------- +-interrupts:Specifies the interrupt source. + For the specific information of each cell in this property,please refer to + the "interrupt-cells" description mentioned above. + +Examples: + gmac0: ethernet@c2080000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xc2080000 0 0x20000>, + <0 0xc0000000 0 0x1000>; + interrupt-parent = <&mbigen_device_gmac>; + interrupts = <656 1>, + <657 1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt new file mode 100644 index 000000000..5dc2a55ad --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt @@ -0,0 +1,105 @@ +* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding + +This binding specifies what properties must be available in the device tree +representation of a PDC IRQ controller. This has a number of input interrupt +lines which can wake the system, and are passed on through output interrupt +lines. + +Required properties: + + - compatible: Specifies the compatibility list for the interrupt controller. + The type shall be and the value shall include "img,pdc-intc". + + - reg: Specifies the base PDC physical address(s) and size(s) of the + addressable register space. The type shall be . + + - interrupt-controller: The presence of this property identifies the node + as an interrupt controller. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + - num-perips: Number of waking peripherals. + + - num-syswakes: Number of SysWake inputs. + + - interrupts: List of interrupt specifiers. The first specifier shall be the + shared SysWake interrupt, and remaining specifies shall be PDC peripheral + interrupts in order. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + 0-7: Peripheral interrupts + 8-15: SysWake interrupts + + - <2nd-cell>: The level-sense information, encoded using the Linux interrupt + flags as follows (only 4 valid for peripheral interrupts): + 0 = none (decided by software) + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 3 = both edge triggered + 4 = active-high level-sensitive (required for perip irqs) + 8 = active-low level-sensitive + +* Examples + +Example 1: + + /* + * TZ1090 PDC block + */ + pdc: pdc@02006000 { + // This is an interrupt controller node. + interrupt-controller; + + // Three cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Offset address of 0x02006000 and size of 0x1000. + reg = <0x02006000 0x1000>; + + // Compatible with Meta hardware trigger block. + compatible = "img,pdc-intc"; + + // Three peripherals are connected. + num-perips = <3>; + + // Four SysWakes are connected. + num-syswakes = <4>; + + interrupts = <18 4 /* level */>, /* Syswakes */ + <30 4 /* level */>, /* Peripheral 0 (RTC) */ + <29 4 /* level */>, /* Peripheral 1 (IR) */ + <31 4 /* level */>; /* Peripheral 2 (WDT) */ + }; + +Example 2: + + /* + * An SoC peripheral that is wired through the PDC. + */ + rtc0 { + // The interrupt controller that this device is wired to. + interrupt-parent = <&pdc>; + + // Interrupt source Peripheral 0 + interrupts = <0 /* Peripheral 0 (RTC) */ + 4> /* IRQ_TYPE_LEVEL_HIGH */ + }; + +Example 3: + + /* + * An interrupt generating device that is wired to a SysWake pin. + */ + touchscreen0 { + // The interrupt controller that this device is wired to. + interrupt-parent = <&pdc>; + + // Interrupt source SysWake 0 that is active-low level-sensitive + interrupts = <8 /* SysWake0 */ + 8 /* IRQ_TYPE_LEVEL_LOW */>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml new file mode 100644 index 000000000..0a046be8d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ingenic SoCs interrupt controller devicetree bindings + +maintainers: + - Paul Cercueil + +properties: + $nodename: + pattern: "^interrupt-controller@[0-9a-f]+$" + + compatible: + oneOf: + - enum: + - ingenic,jz4740-intc + - ingenic,jz4760-intc + - ingenic,jz4780-intc + - items: + - enum: + - ingenic,jz4775-intc + - ingenic,jz4770-intc + - const: ingenic,jz4760-intc + - items: + - const: ingenic,x1000-intc + - const: ingenic,jz4780-intc + - items: + - const: ingenic,jz4725b-intc + - const: ingenic,jz4740-intc + + "#interrupt-cells": + const: 1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false + +examples: + - | + intc: interrupt-controller@10001000 { + compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc"; + reg = <0x10001000 0x40>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt new file mode 100644 index 000000000..7d19f494f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt @@ -0,0 +1,26 @@ +Interrupt chips +--------------- + +* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) + + Required properties: + -------------------- + compatible = "intel,ce4100-ioapic"; + #interrupt-cells = <2>; + + Device's interrupt property: + + interrupts =

; + + The first number (P) represents the interrupt pin which is wired to the + IO APIC. The second number (S) represents the sense of interrupt which + should be configured and can be one of: + 0 - Edge Rising + 1 - Level Low + 2 - Level High + 3 - Edge Falling + +* Local APIC + Required property: + + compatible = "intel,ce4100-lapic"; diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml new file mode 100644 index 000000000..14dced118 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx XScale Networking Processors Interrupt Controller + +maintainers: + - Linus Walleij + +description: | + This interrupt controller is found in the Intel IXP4xx processors. + Some processors have 32 interrupts, some have up to 64 interrupts. + The exact number of interrupts is determined from the compatible + string. + + The distinct IXP4xx families with different interrupt controller + variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four + families were the only ones to reach the developer and consumer + market. + +properties: + compatible: + items: + - enum: + - intel,ixp42x-interrupt + - intel,ixp43x-interrupt + - intel,ixp45x-interrupt + - intel,ixp46x-interrupt + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + intcon: interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + reg = <0xc8003000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt new file mode 100644 index 000000000..4ebfa0008 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -0,0 +1,122 @@ +Specifying interrupt information for devices +============================================ + +1) Interrupt client nodes +------------------------- + +Nodes that describe devices which generate interrupts must contain an +"interrupts" property, an "interrupts-extended" property, or both. If both are +present, the latter should take precedence; the former may be provided simply +for compatibility with software that does not recognize the latter. These +properties contain a list of interrupt specifiers, one per output interrupt. The +format of the interrupt specifier is determined by the interrupt controller to +which the interrupts are routed; see section 2 below for details. + + Example: + interrupt-parent = <&intc1>; + interrupts = <5 0>, <6 0>; + +The "interrupt-parent" property is used to specify the controller to which +interrupts are routed and contains a single phandle referring to the interrupt +controller node. This property is inherited, so it may be specified in an +interrupt client node or in any of its parent nodes. Interrupts listed in the +"interrupts" property are always in reference to the node's interrupt parent. + +The "interrupts-extended" property is a special form; useful when a node needs +to reference multiple interrupt parents or a different interrupt parent than +the inherited one. Each entry in this property contains both the parent phandle +and the interrupt specifier. + + Example: + interrupts-extended = <&intc1 5 1>, <&intc2 1 0>; + +2) Interrupt controller nodes +----------------------------- + +A device is marked as an interrupt controller with the "interrupt-controller" +property. This is a empty, boolean property. An additional "#interrupt-cells" +property defines the number of cells needed to specify a single interrupt. + +It is the responsibility of the interrupt controller's binding to define the +length and format of the interrupt specifier. The following two variants are +commonly used: + + a) one cell + ----------- + The #interrupt-cells property is set to 1 and the single cell defines the + index of the interrupt within the controller. + + Example: + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + b) two cells + ------------ + The #interrupt-cells property is set to 2 and the first cell defines the + index of the interrupt within the controller, while the second cell is used + to specify any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + + Example: + + i2c@7000c000 { + gpioext: gpio-adnp@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <1>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; + + sx8634@2b { + compatible = "smtc,sx8634"; + reg = <0x2b>; + + interrupt-parent = <&gpioext>; + interrupts = <3 0x8>; + + #address-cells = <1>; + #size-cells = <0>; + + threshold = <0x40>; + sensitivity = <7>; + }; + }; + +3) Interrupt wakeup parent +-------------------------- + +Some interrupt controllers in a SoC, are always powered on and have a select +interrupts routed to them, so that they can wakeup the SoC from suspend. These +interrupt controllers do not fall into the category of a parent interrupt +controller and can be specified by the "wakeup-parent" property and contain a +single phandle referring to the wakeup capable interrupt controller. + + Example: + wakeup-parent = <&pdc_intc>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt new file mode 100644 index 000000000..ee2ad36f8 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt @@ -0,0 +1,26 @@ +J-Core Advanced Interrupt Controller + +Required properties: + +- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic + with 8 interrupt lines with programmable priorities, or "jcore,aic2" for + the "aic2" core with 64 interrupts. + +- reg: Memory region(s) for configuration. For SMP, there should be one + region per cpu, indexed by the sequential, zero-based hardware cpu + number. + +- interrupt-controller: Identifies the node as an interrupt controller + +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + + +Example: + +aic: interrupt-controller@200 { + compatible = "jcore,aic2"; + reg = < 0x200 0x30 0x500 0x30 >; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml new file mode 100644 index 000000000..e8dfa6507 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt controller driver for the sl28cpld board management controller + +maintainers: + - Michael Walle + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The following interrupts are available. All types and levels are fixed + and handled by the board management controller. + + ==== ============= ================================== + IRQ line/device description + ==== ============= ================================== + 0 RTC_INT# Interrupt line from on-board RTC + 1 SMB_ALERT# Event on SMB_ALERT# line (P1) + 2 ESPI_ALERT0# Event on ESPI_ALERT0# line (S43) + 3 ESPI_ALERT1# Event on ESPI_ALERT1# line (S44) + 4 PWR_BTN# Event on PWR_BTN# line (P128) + 5 SLEEP# Event on SLEEP# line (S149) + 6 watchdog Interrupt of the internal watchdog + 7 n/a not used + ==== ============= ================================== + +properties: + compatible: + enum: + - kontron,sl28cpld-intc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + +required: + - compatible + - interrupts + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml new file mode 100644 index 000000000..d1d52d1db --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson-3 HyperTransport Interrupt Controller + +maintainers: + - Jiaxun Yang + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +description: | + This interrupt controller is found in the Loongson-3 family of chips to transmit + interrupts from PCH PIC connected on HyperTransport bus. + +properties: + compatible: + const: loongson,htpic-1.0 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 4 + description: | + Four parent interrupts that receive chained interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + #include + htintc: interrupt-controller@1fb000080 { + compatible = "loongson,htintc-1.0"; + reg = <0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml new file mode 100644 index 000000000..87a745582 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson-3 HyperTransport Interrupt Vector Controller + +maintainers: + - Jiaxun Yang + +description: + This interrupt controller is found in the Loongson-3 family of chips for + receiving vectorized interrupts from PCH's interrupt controller. + +properties: + compatible: + const: loongson,htvec-1.0 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + description: Eight parent interrupts that receive chained interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + #include + htvec: interrupt-controller@fb000080 { + compatible = "loongson,htvec-1.0"; + reg = <0xfb000080 0x40>; + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&liointc>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <25 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml new file mode 100644 index 000000000..f38e0113f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson Local I/O Interrupt Controller + +maintainers: + - Jiaxun Yang + +description: | + This interrupt controller is found in the Loongson-3 family of chips as the primary + package interrupt controller which can route local I/O interrupt to interrupt lines + of cores. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - const: loongson,liointc-1.0 + - const: loongson,liointc-1.0a + + reg: + maxItems: 1 + + interrupt-controller: true + + interrupts: + description: + Interrupt source of the CPU interrupts. + minItems: 1 + maxItems: 4 + + interrupt-names: + description: List of names for the parent interrupts. + items: + - const: int0 + - const: int1 + - const: int2 + - const: int3 + minItems: 1 + maxItems: 4 + + '#interrupt-cells': + const: 2 + + 'loongson,parent_int_map': + description: | + This property points how the children interrupts will be mapped into CPU + interrupt lines. Each cell refers to a parent interrupt line from 0 to 3 + and each bit in the cell refers to a child interrupt from 0 to 31. + If a CPU interrupt line didn't connect with liointc, then keep its + cell with zero. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 4 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - 'loongson,parent_int_map' + + +unevaluatedProperties: false + +examples: + - | + iointc: interrupt-controller@3ff01400 { + compatible = "loongson,liointc-1.0"; + reg = <0x3ff01400 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>; + interrupt-names = "int0", "int1"; + + loongson,parent_int_map = <0xf0ffffff>, /* int0 */ + <0x0f000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt new file mode 100644 index 000000000..a63ed9fcb --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt @@ -0,0 +1,24 @@ +Loongson ls1x Interrupt Controller + +Required properties: + +- compatible : should be "loongson,ls1x-intc". Valid strings are: + +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + +intc: interrupt-controller@1fd01040 { + compatible = "loongson,ls1x-intc"; + reg = <0x1fd01040 0x18>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml new file mode 100644 index 000000000..1f6fd73d4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson PCH MSI Controller + +maintainers: + - Jiaxun Yang + +description: + This interrupt controller is found in the Loongson LS7A family of PCH for + transforming interrupts from PCIe MSI into HyperTransport vectorized + interrupts. + +properties: + compatible: + const: loongson,pch-msi-1.0 + + reg: + maxItems: 1 + + loongson,msi-base-vec: + description: + u32 value of the base of parent HyperTransport vector allocated + to PCH MSI. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 255 + + loongson,msi-num-vecs: + description: + u32 value of the number of parent HyperTransport vectors allocated + to PCH MSI. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 256 + + msi-controller: true + +required: + - compatible + - reg + - msi-controller + - loongson,msi-base-vec + - loongson,msi-num-vecs + +additionalProperties: true #fixme + +examples: + - | + #include + msi: msi-controller@2ff00000 { + compatible = "loongson,pch-msi-1.0"; + reg = <0x2ff00000 0x4>; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <64>; + interrupt-parent = <&htvec>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml new file mode 100644 index 000000000..fdd6a38a3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson PCH PIC Controller + +maintainers: + - Jiaxun Yang + +description: + This interrupt controller is found in the Loongson LS7A family of PCH for + transforming interrupts from on-chip devices into HyperTransport vectorized + interrupts. + +properties: + compatible: + const: loongson,pch-pic-1.0 + + reg: + maxItems: 1 + + loongson,pic-base-vec: + description: + u32 value of the base of parent HyperTransport vector allocated + to PCH PIC. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 192 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - loongson,pic-base-vec + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + #include + pic: interrupt-controller@10000000 { + compatible = "loongson,pch-pic-1.0"; + reg = <0x10000000 0x400>; + interrupt-controller; + #interrupt-cells = <2>; + loongson,pic-base-vec = <64>; + interrupt-parent = <&htvec>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt new file mode 100644 index 000000000..aee38e7c1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt @@ -0,0 +1,18 @@ +TI-NSPIRE interrupt controller + +Required properties: +- compatible: Compatible property value should be "lsi,zevio-intc". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +Example: + +interrupt-controller { + compatible = "lsi,zevio-intc"; + interrupt-controller; + reg = <0xDC000000 0x1000>; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt new file mode 100644 index 000000000..5fc03134a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt @@ -0,0 +1,38 @@ +Marvell Armada 370, 375, 38x, XP Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible: Should be "marvell,mpic" +- interrupt-controller: Identifies the node as an interrupt controller. +- msi-controller: Identifies the node as an PCI Message Signaled + Interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. Should be 1. + The cell is the IRQ number + +- reg: Should contain PMIC registers location and length. First pair + for the main interrupt registers, second pair for the per-CPU + interrupt registers. For this last pair, to be compliant with SMP + support, the "virtual" must be use (For the record, these registers + automatically map to the interrupt controller registers of the + current CPU) + +Optional properties: + +- interrupts: If defined, then it indicates that this MPIC is + connected as a slave to another interrupt controller. This is + typically the case on Armada 375 and Armada 38x, where the MPIC is + connected as a slave to the Cortex-A9 GIC. The provided interrupt + indicate to which GIC interrupt the MPIC output is connected. + +Example: + + mpic: interrupt-controller@d0020000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + msi-controller; + reg = <0xd0020a00 0x1d0>, + <0xd0021070 0x58>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt new file mode 100644 index 000000000..86a7b4cd0 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt @@ -0,0 +1,25 @@ +Marvell Armada 7K/8K PIC Interrupt controller +--------------------------------------------- + +This is the Device Tree binding for the PIC, a secondary interrupt +controller available on the Marvell Armada 7K/8K ARM64 SoCs, and +typically connected to the GIC as the primary interrupt controller. + +Required properties: +- compatible: should be "marvell,armada-8k-pic" +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: the number of cells to define interrupts on this + controller. Should be 1 +- reg: the register area for the PIC interrupt controller +- interrupts: the interrupt to the primary interrupt controller, + typically the GIC + +Example: + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt new file mode 100644 index 000000000..64a00ceb7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt @@ -0,0 +1,27 @@ +Marvell GICP Controller +----------------------- + +GICP is a Marvell extension of the GIC that allows to trigger GIC SPI +interrupts by doing a memory transaction. It is used by the ICU +located in the Marvell CP110 to turn wired interrupts inside the CP +into GIC SPI interrupts. + +Required properties: + +- compatible: Must be "marvell,ap806-gicp" + +- reg: Must be the address and size of the GICP SPI registers + +- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available + for this GICP + +- msi-controller: indicates that this is an MSI controller + +Example: + +gicp_spi: gicp-spi@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt new file mode 100644 index 000000000..1c94a57a6 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt @@ -0,0 +1,112 @@ +Marvell ICU Interrupt Controller +-------------------------------- + +The Marvell ICU (Interrupt Consolidation Unit) controller is +responsible for collecting all wired-interrupt sources in the CP and +communicating them to the GIC in the AP, the unit translates interrupt +requests on input wires to MSG memory mapped transactions to the GIC. +These messages will access a different GIC memory area depending on +their type (NSR, SR, SEI, REI, etc). + +Required properties: + +- compatible: Should be "marvell,cp110-icu" + +- reg: Should contain ICU registers location and length. + +Subnodes: Each group of interrupt is declared as a subnode of the ICU, +with their own compatible. + +Required properties for the icu_nsr/icu_sei subnodes: + +- compatible: Should be one of: + * "marvell,cp110-icu-nsr" + * "marvell,cp110-icu-sr" + * "marvell,cp110-icu-sei" + * "marvell,cp110-icu-rei" + +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + + The 1st cell is the index of the interrupt in the ICU unit. + + The 2nd cell is the type of the interrupt. See arm,gic.txt for + details. + +- interrupt-controller: Identifies the node as an interrupt + controller. + +- msi-parent: Should point to the GICP controller, the GIC extension + that allows to trigger interrupts using MSG memory mapped + transactions. + +Note: each 'interrupts' property referring to any 'icu_xxx' node shall + have a different number within [0:206]. + +Example: + +icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + + CP110_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP110_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; +}; + +node1 { + interrupt-parent = <&icu_nsr>; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; +}; + +node2 { + interrupt-parent = <&icu_sei>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; +}; + +/* Would not work with the above nodes */ +node3 { + interrupt-parent = <&icu_nsr>; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; +}; + +The legacy bindings were different in this way: + +- #interrupt-cells: The value was 3. + The 1st cell was the group type of the ICU interrupt. Possible + group types were: + ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure + ICU_GRP_SR (0x1) : Shared peripheral interrupt, secure + ICU_GRP_SEI (0x4) : System error interrupt + ICU_GRP_REI (0x5) : RAM error interrupt + The 2nd cell was the index of the interrupt in the ICU unit. + The 3rd cell was the type of the interrupt. See arm,gic.txt for + details. + +Example: + +icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; +}; + +node1 { + interrupt-parent = <&icu>; + interrupts = ; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt new file mode 100644 index 000000000..0ebfc952c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt @@ -0,0 +1,42 @@ + +* Marvell ODMI for MSI support + +Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller +which can be used by on-board peripheral for MSI interrupts. + +Required properties: + +- compatible : The value here should contain: + + "marvell,ap806-odmi-controller", "marvell,odmi-controller". + +- interrupt,controller : Identifies the node as an interrupt controller. + +- msi-controller : Identifies the node as an MSI controller. + +- marvell,odmi-frames : Number of ODMI frames available. Each frame + provides a number of events. + +- reg : List of register definitions, one for each + ODMI frame. + +- marvell,spi-base : List of GIC base SPI interrupts, one for each + ODMI frame. Those SPI interrupts are 0-based, + i.e marvell,spi-base = <128> will use SPI #96. + See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml + for details about the GIC Device Tree binding. + +Example: + + odmi: odmi@300000 { + compatible = "marvell,ap806-odmi-controller", + "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt new file mode 100644 index 000000000..2c11ac76f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt @@ -0,0 +1,48 @@ +Marvell Orion SoC interrupt controllers + +* Main interrupt controller + +Required properties: +- compatible: shall be "marvell,orion-intc" +- reg: base address(es) of interrupt registers starting with CAUSE register +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt source, shall be 1 + +The interrupt sources map to the corresponding bits in the interrupt +registers, i.e. +- 0 maps to bit 0 of first base address, +- 1 maps to bit 1 of first base address, +- 32 maps to bit 0 of second base address, and so on. + +Example: + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + /* Dove has 64 first level interrupts */ + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + +* Bridge interrupt controller + +Required properties: +- compatible: shall be "marvell,orion-bridge-intc" +- reg: base address of bridge interrupt registers starting with CAUSE register +- interrupts: bridge interrupt of the main interrupt controller +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt source, shall be 1 + +Optional properties: +- marvell,#interrupts: number of interrupts provided by bridge interrupt + controller, defaults to 32 if not set + +Example: + bridge_intc: interrupt-controller { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + /* Dove bridge provides 5 interrupts */ + marvell,#interrupts = <5>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt new file mode 100644 index 000000000..0beafed50 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt @@ -0,0 +1,36 @@ +Marvell SEI (System Error Interrupt) Controller +----------------------------------------------- + +Marvell SEI (System Error Interrupt) controller is an interrupt +aggregator. It receives interrupts from several sources and aggregates +them to a single interrupt line (an SPI) on the parent interrupt +controller. + +This interrupt controller can handle up to 64 SEIs, a set comes from the +AP and is wired while a second set comes from the CPs by the mean of +MSIs. + +Required properties: + +- compatible: should be one of: + * "marvell,ap806-sei" +- reg: SEI registers location and length. +- interrupts: identifies the parent IRQ that will be triggered. +- #interrupt-cells: number of cells to define an SEI wired interrupt + coming from the AP, should be 1. The cell is the IRQ + number. +- interrupt-controller: identifies the node as an interrupt controller + for AP interrupts. +- msi-controller: identifies the node as an MSI controller for the CPs + interrupts. + +Example: + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = ; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt new file mode 100644 index 000000000..5865f4f2c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt @@ -0,0 +1,33 @@ +* Mediatek 27xx cirq + +In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to +work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC. +The external interrupts (outside MCUSYS) will feed through CIRQ and connect +to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive +interrupts and generate a pulse signal to parent interrupt controller when +flush command is executed. With CIRQ, MCUSYS can be completely turned off +to improve the system power consumption without losing interrupts. + +Required properties: +- compatible: should be one of + - "mediatek,mt2701-cirq" for mt2701 CIRQ + - "mediatek,mt8135-cirq" for mt8135 CIRQ + - "mediatek,mt8173-cirq" for mt8173 CIRQ + and "mediatek,cirq" as a fallback. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. +- reg: Physical base address of the cirq registers and length of memory + mapped region. +- mediatek,ext-irq-range: Identifies external irq number range in different + SOCs. + +Example: + cirq: interrupt-controller@10204000 { + compatible = "mediatek,mt2701-cirq", + "mediatek,mtk-cirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&sysirq>; + reg = <0 0x10204000 0 0x400>; + mediatek,ext-irq-start = <32 200>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt new file mode 100644 index 000000000..84ced3f41 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -0,0 +1,43 @@ +MediaTek sysirq + +MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI +interrupt. + +Required properties: +- compatible: should be + "mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516 + "mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183 + "mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173 + "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 + "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 + "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 + "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 + "mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629 + "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 + "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 + "mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779 + "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 + "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 + "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 + "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589 + "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582 + "mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580 + "mediatek,mt6577-sysirq": for MT6577 + "mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712 + "mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701 +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt. +- reg: Physical base address of the intpol registers and length of memory + mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others + need 1. + +Example: + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6797-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10220620 0 0x20>, + <0 0x10220690 0 0x10>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt new file mode 100644 index 000000000..c3a1b37c4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt @@ -0,0 +1,67 @@ +Microchip PIC32 Interrupt Controller +==================================== + +The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC). +It handles all internal and external interrupts. This controller exists outside +of the CPU and is the arbitrator of all interrupts (including interrupts from +the CPU itself) before they are presented to the CPU. + +External interrupts have a software configurable edge polarity. Non external +interrupts have a type and polarity that is determined by the source of the +interrupt. + +Required properties +------------------- + +- compatible: Should be "microchip,pic32mzda-evic" +- reg: Specifies physical base address and size of register range. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt cells: Specifies the number of cells used to encode an interrupt + source connected to this controller. The value shall be 2 and interrupt + descriptor shall have the following format: + + + + hw_irq - represents the hardware interrupt number as in the data sheet. + irq_type - is used to describe the type and polarity of an interrupt. For + internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and + IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use + IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity. + +Optional properties +------------------- +- microchip,external-irqs: u32 array of external interrupts with software + polarity configuration. This array corresponds to the bits in the INTCON + SFR. + +Example +------- + +evic: interrupt-controller@1f810000 { + compatible = "microchip,pic32mzda-evic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1f810000 0x1000>; + microchip,external-irqs = <3 8 13 18 23>; +}; + +Each device/peripheral must request its interrupt line with the associated type +and polarity. + +Internal interrupt DTS snippet +------------------------------ + +device@1f800000 { + ... + interrupts = <113 IRQ_TYPE_LEVEL_HIGH>; + ... +}; + +External interrupt DTS snippet +------------------------------ + +device@1f800000 { + ... + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + ... +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml new file mode 100644 index 000000000..372ccbfae --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP/Orion Interrupt controller bindings + +maintainers: + - Thomas Gleixner + - Jason Cooper + - Marc Zyngier + - Rob Herring + +allOf: + - if: + properties: + compatible: + not: + contains: + const: marvell,orion-intc + then: + required: + - mrvl,intc-nr-irqs + - if: + properties: + compatible: + contains: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + then: + properties: + reg: + maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - marvell,mmp3-intc + - mrvl,mmp2-mux-intc + then: + properties: + reg: + minItems: 2 + - if: + properties: + compatible: + contains: + const: mrvl,mmp2-mux-intc + then: + properties: + interrupts: + maxItems: 1 + reg-names: + items: + - const: 'mux status' + - const: 'mux mask' + required: + - interrupts + else: + properties: + interrupts: false + +properties: + '#interrupt-cells': + const: 1 + + compatible: + enum: + - mrvl,mmp-intc + - mrvl,mmp2-intc + - marvell,mmp3-intc + - marvell,orion-intc + - mrvl,mmp2-mux-intc + + reg: + minItems: 1 + maxItems: 2 + + reg-names: true + + interrupts: true + + interrupt-controller: true + + mrvl,intc-nr-irqs: + description: | + Specifies the number of interrupts in the interrupt controller. + $ref: /schemas/types.yaml#/definitions/uint32 + + mrvl,clr-mfp-irq: + description: | + Specifies the interrupt that needs to clear MFP edge detection first. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - '#interrupt-cells' + - compatible + - reg + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller@d4282000 { + compatible = "mrvl,mmp2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>; + mrvl,intc-nr-irqs = <64>; + }; + + interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <4>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + - | + interrupt-controller@fed20204 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt new file mode 100644 index 000000000..f5baeccb6 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt @@ -0,0 +1,21 @@ +Microsemi Ocelot SoC ICPU Interrupt Controller + +Required properties: + +- compatible : should be "mscc,ocelot-icpu-intr" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + + intc: interrupt-controller@70000070 { + compatible = "mscc,ocelot-icpu-intr"; + reg = <0x70000070 0x70>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt new file mode 100644 index 000000000..c20b51df7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt @@ -0,0 +1,135 @@ +This document describes the generic device tree binding for MSI controllers and +their master(s). + +Message Signaled Interrupts (MSIs) are a class of interrupts generated by a +write to an MMIO address. + +MSIs were originally specified by PCI (and are used with PCIe), but may also be +used with other busses, and hence a mechanism is required to relate devices on +those busses to the MSI controllers which they are capable of using, +potentially including additional information. + +MSIs are distinguished by some combination of: + +- The doorbell (the MMIO address written to). + + Devices may be configured by software to write to arbitrary doorbells which + they can address. An MSI controller may feature a number of doorbells. + +- The payload (the value written to the doorbell). + + Devices may be configured to write an arbitrary payload chosen by software. + MSI controllers may have restrictions on permitted payloads. + +- Sideband information accompanying the write. + + Typically this is neither configurable nor probeable, and depends on the path + taken through the memory system (i.e. it is a property of the combination of + MSI controller and device rather than a property of either in isolation). + + +MSI controllers: +================ + +An MSI controller signals interrupts to a CPU when a write is made to an MMIO +address by some master. An MSI controller may feature a number of doorbells. + +Required properties: +-------------------- + +- msi-controller: Identifies the node as an MSI controller. + +Optional properties: +-------------------- + +- #msi-cells: The number of cells in an msi-specifier, required if not zero. + + Typically this will encode information related to sideband data, and will + not encode doorbells or payloads as these can be configured dynamically. + + The meaning of the msi-specifier is defined by the device tree binding of + the specific MSI controller. + + +MSI clients +=========== + +MSI clients are devices which generate MSIs. For each MSI they wish to +generate, the doorbell and payload may be configured, though sideband +information may not be configurable. + +Required properties: +-------------------- + +- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI + controller which the device is capable of using. + + This property is unordered, and MSIs may be allocated from any combination of + MSI controllers listed in the msi-parent property. + + If a device has restrictions on the allocation of MSIs, these restrictions + must be described with additional properties. + + When #msi-cells is non-zero, busses with an msi-parent will require + additional properties to describe the relationship between devices on the bus + and the set of MSIs they can potentially generate. + + +Example +======= + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi_a: msi-controller@a { + reg = <0xa 0xf00>; + compatible = "vendor-a,some-controller"; + msi-controller; + /* No sideband data, so #msi-cells omitted */ + }; + + msi_b: msi-controller@b { + reg = <0xb 0xf00>; + compatible = "vendor-b,another-controller"; + msi-controller; + /* Each device has some unique ID */ + #msi-cells = <1>; + }; + + msi_c: msi-controller@c { + reg = <0xc 0xf00>; + compatible = "vendor-b,another-controller"; + msi-controller; + /* Each device has some unique ID */ + #msi-cells = <1>; + }; + + dev@0 { + reg = <0x0 0xf00>; + compatible = "vendor-c,some-device"; + + /* Can only generate MSIs to msi_a */ + msi-parent = <&msi_a>; + }; + + dev@1 { + reg = <0x1 0xf00>; + compatible = "vendor-c,some-device"; + + /* + * Can generate MSIs to either A or B. + */ + msi-parent = <&msi_a>, <&msi_b 0x17>; + }; + + dev@2 { + reg = <0x2 0xf00>; + compatible = "vendor-c,some-device"; + /* + * Has different IDs at each MSI controller. + * Can generate MSIs to all of the MSI controllers. + */ + msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml new file mode 100644 index 000000000..bbf0f26cd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar Interrupt Controller + +maintainers: + - Mark-PK Tsai + +description: |+ + MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy + interrupt controllers that routes interrupts to the GIC. + + The HW block exposes a number of interrupt controllers, each + can support up to 64 interrupts. + +properties: + compatible: + const: mstar,mst-intc + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + Use the same format as specified by GIC in arm,gic.yaml. + + reg: + maxItems: 1 + + mstar,irqs-map-range: + description: | + The range of parent interrupt controller's interrupt + lines that are hardwired to mstar interrupt controller. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + minItems: 2 + maxItems: 2 + + mstar,intc-no-eoi: + description: + Mark this controller has no End Of Interrupt(EOI) implementation. + type: boolean + +required: + - compatible + - reg + - mstar,irqs-map-range + +additionalProperties: false + +examples: + - | + mst_intc0: interrupt-controller@1f2032d0 { + compatible = "mstar,mst-intc"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x1f2032d0 0x30>; + mstar,irqs-map-range = <0 63>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml new file mode 100644 index 000000000..039e08af9 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS Global Interrupt Controller + +maintainers: + - Paul Burton + - Thomas Bogendoerfer + +description: | + The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. + It also supports local (per-processor) interrupts and software-generated + interrupts which can be used as IPIs. The GIC also includes a free-running + global timer, per-CPU count/compare timers, and a watchdog. + +properties: + compatible: + const: mti,gic + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the type of interrupt: local or shared defined in the + file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the + GIC interrupt number. The 3d cell encodes the interrupt flags setting up + the IRQ trigger modes, which are defined in the file + 'dt-bindings/interrupt-controller/irq.h'. + + reg: + description: | + Base address and length of the GIC registers space. If not present, + the base address reported by the hardware GCR_GIC_BASE will be used. + maxItems: 1 + + interrupt-controller: true + + mti,reserved-cpu-vectors: + description: | + Specifies the list of CPU interrupt vectors to which the GIC may not + route interrupts. This property is ignored if the CPU is started in EIC + mode. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 1 + maxItems: 6 + uniqueItems: true + items: + minimum: 2 + maximum: 7 + + mti,reserved-ipi-vectors: + description: | + Specifies the range of GIC interrupts that are reserved for IPIs. + It accepts two values: the 1st is the starting interrupt and the 2nd is + the size of the reserved range. If not specified, the driver will + allocate the last (2 * number of VPEs in the system). + $ref: /schemas/types.yaml#definitions/uint32-array + items: + - minimum: 0 + maximum: 254 + - minimum: 2 + maximum: 254 + + timer: + type: object + description: | + MIPS GIC includes a free-running global timer, per-CPU count/compare + timers, and a watchdog. Currently only the GIC Timer is supported. + properties: + compatible: + const: mti,gic-timer + + interrupts: + description: | + Interrupt for the GIC local timer, so normally it's suppose to be of + format. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + + required: + - compatible + - interrupts + + oneOf: + - required: + - clocks + - required: + - clock-frequency + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + mti,reserved-cpu-vectors = <7>; + mti,reserved-ipi-vectors = <40 8>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clock-frequency = <50000000>; + }; + }; + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clocks = <&cpu_pll>; + }; + }; + - | + interrupt-controller { + compatible = "mti,gic"; + interrupt-controller; + #interrupt-cells = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt new file mode 100644 index 000000000..2ff356640 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt @@ -0,0 +1,41 @@ +NVIDIA Legacy Interrupt Controller + +All Tegra SoCs contain a legacy interrupt controller that routes +interrupts to the GIC, and also serves as a wakeup source. It is also +referred to as "ictlr", hence the name of the binding. + +The HW block exposes a number of interrupt controllers, each +implementing a set of 32 interrupts. + +Required properties: + +- compatible : should be: "nvidia,tegra-ictlr". The LIC on + subsequent SoCs remained backwards-compatible with Tegra30, so on + Tegra generations later than Tegra30 the compatible value should + include "nvidia,tegra30-ictlr". +- reg : Specifies base physical address and size of the registers. + Each controller must be described separately (Tegra20 has 4 of them, + whereas Tegra30 and later have 5). +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs + are explicitly forbidden. + +Example: + + ictlr: interrupt-controller@60004000 { + compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr"; + reg = <0x60004000 64>, + <0x60004100 64>, + <0x60004200 64>, + <0x60004300 64>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt new file mode 100644 index 000000000..0bfb3ba55 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt @@ -0,0 +1,58 @@ +* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers + +Required properties: +- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic". +- reg: should contain IC registers location and length. +- interrupt-controller: identifies the node as an interrupt controller. +- #interrupt-cells: the number of cells to define an interrupt, should be 2. + The first cell is the IRQ number, the second cell is used to specify + one of the supported IRQ types: + IRQ_TYPE_EDGE_RISING = low-to-high edge triggered, + IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered, + IRQ_TYPE_LEVEL_HIGH = active high level-sensitive, + IRQ_TYPE_LEVEL_LOW = active low level-sensitive. + Reset value is IRQ_TYPE_LEVEL_LOW. + +Optional properties: +- interrupts: empty for MIC interrupt controller, cascaded MIC + hardware interrupts for SIC1 and SIC2 + +Examples: + + /* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */ + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + reg = <0x40008000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sic1: interrupt-controller@4000c000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x4000c000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>; + }; + + sic2: interrupt-controller@40010000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x40010000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + }; + + /* ADC */ + adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt new file mode 100644 index 000000000..ccbbfdc53 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt @@ -0,0 +1,97 @@ +* Open PIC Binding + +This binding specifies what properties must be available in the device tree +representation of an Open PIC compliant interrupt controller. This binding is +based on the binding defined for Open PIC in [1] and is a superset of that +binding. + +Required properties: + + NOTE: Many of these descriptions were paraphrased here from [1] to aid + readability. + + - compatible: Specifies the compatibility list for the PIC. The type + shall be and the value shall include "open-pic". + + - reg: Specifies the base physical address(s) and size(s) of this + PIC's addressable register space. The type shall be . + + - interrupt-controller: The presence of this property identifies the node + as an Open PIC. No property value shall be defined. + + - #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 2. + + - #address-cells: Specifies the number of cells needed to encode an + address. The type shall be and the value shall be 0. As such, + 'interrupt-map' nodes do not have to specify a parent unit address. + +Optional properties: + + - pic-no-reset: The presence of this property indicates that the PIC + shall not be reset during runtime initialization. No property value shall + be defined. The presence of this property also mandates that any + initialization related to interrupt sources shall be limited to sources + explicitly referenced in the device tree. + +* Interrupt Specifier Definition + + Interrupt specifiers consists of 2 cells encoded as + follows: + + - <1st-cell>: The interrupt-number that identifies the interrupt source. + + - <2nd-cell>: The level-sense information, encoded as follows: + 0 = low-to-high edge triggered + 1 = active low level-sensitive + 2 = active high level-sensitive + 3 = high-to-low edge triggered + +* Examples + +Example 1: + + /* + * An Open PIC interrupt controller + */ + mpic: pic@40000 { + // This is an interrupt controller node. + interrupt-controller; + + // No address cells so that 'interrupt-map' nodes which reference + // this Open PIC node do not need a parent address specifier. + #address-cells = <0>; + + // Two cells to encode interrupt sources. + #interrupt-cells = <2>; + + // Offset address of 0x40000 and size of 0x40000. + reg = <0x40000 0x40000>; + + // Compatible with Open PIC. + compatible = "open-pic"; + + // The PIC shall not be reset. + pic-no-reset; + }; + +Example 2: + + /* + * An interrupt generating device that is wired to an Open PIC. + */ + serial0: serial@4500 { + // Interrupt source '42' that is active high level-sensitive. + // Note that there are only two cells as specified in the interrupt + // parent's '#interrupt-cells' property. + interrupts = <42 2>; + + // The interrupt controller that this device is wired to. + interrupt-parent = <&mpic>; + }; + +* References + +[1] Devicetree Specification + (https://www.devicetree.org/specifications/) + diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt new file mode 100644 index 000000000..55c04faa3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt @@ -0,0 +1,23 @@ +OpenRISC 1000 Programmable Interrupt Controller + +Required properties: + +- compatible : should be "opencores,or1k-pic-level" for variants with + level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with + edge triggered interrupt lines or "opencores,or1200-pic" for machines + with the non-spec compliant or1200 type implementation. + + "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic", + but this is only for backwards compatibility. + +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +Example: + +intc: interrupt-controller { + compatible = "opencores,or1k-pic-level"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt new file mode 100644 index 000000000..caec07cc7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt @@ -0,0 +1,22 @@ +Open Multi-Processor Interrupt Controller + +Required properties: + +- compatible : This should be "openrisc,ompic" +- reg : Specifies base physical address and size of the register space. The + size is based on the number of cores the controller has been configured + to handle, this should be set to 8 bytes per cpu core. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : This should be set to 0 as this will not be an irq + parent. +- interrupts : Specifies the interrupt line to which the ompic is wired. + +Example: + +ompic: interrupt-controller@98000000 { + compatible = "openrisc,ompic"; + reg = <0x98000000 16>; + interrupt-controller; + #interrupt-cells = <0>; + interrupts = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt new file mode 100644 index 000000000..aabce7810 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt @@ -0,0 +1,44 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller + +On most SoC the IRQ controller need to flush the DDR FIFO before running +the interrupt handler of some devices. This is configured using the +qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties. + +Required Properties: + +- compatible: has to be "qca,-cpu-intc", "qca,ar7100-cpu-intc" + as fallback +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 1 for intc + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Optional Properties: + +- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write + buffer flush +- qca,ddr-wb-channels: List of phandles to the write buffer channels for + each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt + default to the entry's index. + +Example: + + interrupt-controller { + compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; + + interrupt-controller; + #interrupt-cells = <1>; + + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; + }; + + ... + + ddr_ctrl: memory-controller@18000000 { + ... + #qca,ddr-wb-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt new file mode 100644 index 000000000..ad70006c1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt @@ -0,0 +1,45 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller + +The MISC interrupt controller is a secondary controller for lower priority +interrupt. + +Required Properties: +- compatible: has to be "qca,-cpu-intc", "qca,ar7100-misc-intc" or + "qca,-cpu-intc", "qca,ar7240-misc-intc" +- reg: Base address and size of the controllers memory area +- interrupts: Interrupt specifier for the controllers interrupt. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 1 + +Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x, +use ar7240 for all other SoCs. + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + + interrupt-controller@18060010 { + compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + +Another example: + + interrupt-controller@18060010 { + compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt new file mode 100644 index 000000000..1df293953 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -0,0 +1,73 @@ +PDC interrupt controller + +Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a +Power Domain Controller (PDC) that is on always-on domain. In addition to +providing power control for the power domains, the hardware also has an +interrupt controller that can be used to help detect edge low interrupts as +well detect interrupts when the GIC is non-operational. + +GIC is parent interrupt controller at the highest level. Platform interrupt +controller PDC is next in hierarchy, followed by others. Drivers requiring +wakeup capabilities of their device interrupts routed through the PDC, must +specify PDC as their interrupt controller and request the PDC port associated +with the GIC interrupt. See example below. + +Properties: + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,-pdc" and "qcom,pdc" + - "qcom,sc7180-pdc": For SC7180 + - "qcom,sdm845-pdc": For SDM845 + +- reg: + Usage: required + Value type: + Definition: Specifies the base physical address for PDC hardware. + +- interrupt-cells: + Usage: required + Value type: + Definition: Specifies the number of cells needed to encode an interrupt + source. + Must be 2. + The first element of the tuple is the PDC pin for the + interrupt. + The second element is the trigger type. + +- interrupt-controller: + Usage: required + Value type: + Definition: Identifies the node as an interrupt controller. + +- qcom,pdc-ranges: + Usage: required + Value type: + Definition: Specifies the PDC pin offset and the number of PDC ports. + The tuples indicates the valid mapping of valid PDC ports + and their hwirq mapping. + The first element of the tuple is the starting PDC port. + The second element is the GIC hwirq number for the PDC port. + The third element is the number of interrupts in sequence. + +Example: + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc"; + reg = <0xb220000 0x30000>; + qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + +DT binding of a device that wants to use the GIC SPI 514 as a wakeup +interrupt, must do - + + wake-device { + interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>; + }; + +In this case interrupt 514 would be mapped to port 2 on the PDC as defined by +the qcom,pdc-ranges property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt new file mode 100644 index 000000000..e0062aebf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt @@ -0,0 +1,61 @@ +RDA Micro RDA8810PL Interrupt Controller + +The interrupt controller in RDA8810PL SoC is a custom interrupt controller +which supports up to 32 interrupts. + +Required properties: + +- compatible: Should be "rda,8810pl-intc". +- reg: Specifies base physical address of the registers set. +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + +The interrupt sources are as follows: + +ID Name +------------ +0: PULSE_DUMMY +1: I2C +2: NAND_NFSC +3: SDMMC1 +4: SDMMC2 +5: SDMMC3 +6: SPI1 +7: SPI2 +8: SPI3 +9: UART1 +10: UART2 +11: UART3 +12: GPIO1 +13: GPIO2 +14: GPIO3 +15: KEYPAD +16: TIMER +17: TIMEROS +18: COMREG0 +19: COMREG1 +20: USB +21: DMC +22: DMA +23: CAMERA +24: GOUDA +25: GPU +26: VPU_JPG +27: VPU_HOST +28: VOC +29: AUIFC0 +30: AUIFC1 +31: L2CC + +Example: + apb@20800000 { + compatible = "simple-bus"; + ... + intc: interrupt-controller@0 { + compatible = "rda,8810pl-intc"; + reg = <0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt new file mode 100644 index 000000000..56e8d82af --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt @@ -0,0 +1,22 @@ +* H8/300H Interrupt controller + +Required properties: + +- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback. +- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in + interrupts.txt in this directory +- regs: Base address of interrupt controller registers. + +Optional properties: + +- any properties, listed in interrupts.txt, and any standard resource allocation + properties + +Example: + + h8intc: interrupt-controller@fee012 { + compatible = "renesas,h8300h-intc", "renesas,h8300-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfee012 7>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt new file mode 100644 index 000000000..faded2b15 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt @@ -0,0 +1,22 @@ +* H8S Interrupt controller + +Required properties: + +- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback. +- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in + interrupts.txt in this directory +- regs: Base address of interrupt controller registers. + +Optional properties: + +- any properties, listed in interrupts.txt, and any standard resource allocation + properties + +Example: + + h8intc: interrupt-controller@fffe00 { + compatible = "renesas,h8s-intc", "renesas,h8300-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfffe00 24>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml new file mode 100644 index 000000000..f4aae56c6 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Interrupt Controller (INTC) for external pins + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + items: + - enum: + - renesas,intc-irqpin-r8a7740 # R-Mobile A1 + - renesas,intc-irqpin-r8a7778 # R-Car M1A + - renesas,intc-irqpin-r8a7779 # R-Car H1 + - renesas,intc-irqpin-sh73a0 # SH-Mobile AG5 + - const: renesas,intc-irqpin + + reg: + minItems: 5 + items: + - description: Interrupt control register + - description: Interrupt priority register + - description: Interrupt source register + - description: Interrupt mask register + - description: Interrupt mask clear register + - description: Interrupt control register for ICR0 with IRLM0 bit + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + minItems: 1 + maxItems: 8 + + sense-bitfield-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4] + default: 4 + description: + Width of a single sense bitfield in the SENSE register, if different from the + default. + + control-parent: + type: boolean + description: + Disable and enable interrupts on the parent interrupt controller, needed for some + broken implementations. + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - interrupts + +if: + properties: + compatible: + contains: + enum: + - renesas,intc-irqpin-r8a7740 + - renesas,intc-irqpin-sh73a0 +then: + required: + - clocks + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + #include + + irqpin1: interrupt-controller@e6900004 { + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml new file mode 100644 index 000000000..b67b8cbd3 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller + +maintainers: + - Geert Uytterhoeven + +properties: + compatible: + items: + - enum: + - renesas,irqc-r8a73a4 # R-Mobile APE6 + - renesas,irqc-r8a7742 # RZ/G1H + - renesas,irqc-r8a7743 # RZ/G1M + - renesas,irqc-r8a7744 # RZ/G1N + - renesas,irqc-r8a7745 # RZ/G1E + - renesas,irqc-r8a77470 # RZ/G1C + - renesas,irqc-r8a7790 # R-Car H2 + - renesas,irqc-r8a7791 # R-Car M2-W + - renesas,irqc-r8a7792 # R-Car V2H + - renesas,irqc-r8a7793 # R-Car M2-N + - renesas,irqc-r8a7794 # R-Car E2 + - renesas,intc-ex-r8a774a1 # RZ/G2M + - renesas,intc-ex-r8a774b1 # RZ/G2N + - renesas,intc-ex-r8a774c0 # RZ/G2E + - renesas,intc-ex-r8a7795 # R-Car H3 + - renesas,intc-ex-r8a7796 # R-Car M3-W + - renesas,intc-ex-r8a77965 # R-Car M3-N + - renesas,intc-ex-r8a77970 # R-Car V3M + - renesas,intc-ex-r8a77980 # R-Car V3H + - renesas,intc-ex-r8a77990 # R-Car E3 + - renesas,intc-ex-r8a77995 # R-Car D3 + - const: renesas,irqc + + '#interrupt-cells': + # an interrupt index and flags, as defined in interrupts.txt in + # this directory + const: 2 + + interrupt-controller: true + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 32 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include + #include + #include + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7790", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe61c0000 0x200>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD 407>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml new file mode 100644 index 000000000..755cdfabf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/renesas,rza1-irqc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A1 Interrupt Controller + +maintainers: + - Chris Brandt + - Geert Uytterhoeven + +description: | + The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas RZ/A1 and + RZ/A2 SoCs: + - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI interrupts, + - NMI edge select. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-irqc # RZ/A1H + - renesas,r7s9210-irqc # RZ/A2M + - const: renesas,rza1-irqc + + '#interrupt-cells': + const: 2 + + '#address-cells': + const: 0 + + interrupt-controller: true + + reg: + maxItems: 1 + + interrupt-map: + maxItems: 8 + description: Specifies the mapping from external interrupts to GIC interrupts. + + interrupt-map-mask: + items: + - const: 7 + - const: 0 + +required: + - compatible + - '#interrupt-cells' + - '#address-cells' + - interrupt-controller + - reg + - interrupt-map + - interrupt-map-mask + +additionalProperties: false + +examples: + - | + #include + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt new file mode 100644 index 000000000..265b223cd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt @@ -0,0 +1,52 @@ +RISC-V Hart-Level Interrupt Controller (HLIC) +--------------------------------------------- + +RISC-V cores include Control Status Registers (CSRs) which are local to each +CPU core (HART in RISC-V terminology) and can be read or written by software. +Some of these CSRs are used to control local interrupts connected to the core. +Every interrupt is ultimately routed through a hart's HLIC before it +interrupts that hart. + +The RISC-V supervisor ISA manual specifies three interrupt sources that are +attached to every HLIC: software interrupts, the timer interrupt, and external +interrupts. Software interrupts are used to send IPIs between cores. The +timer interrupt comes from an architecturally mandated real-time timer that is +controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External +interrupts connect all other device interrupts to the HLIC, which are routed +via the platform-level interrupt controller (PLIC). + +All RISC-V systems that conform to the supervisor ISA specification are +required to have a HLIC with these three interrupt sources present. Since the +interrupt map is defined by the ISA it's not listed in the HLIC's device tree +entry, though external interrupt controllers (like the PLIC, for example) will +need to define how their interrupts map to the relevant HLICs. This means +a PLIC interrupt property will typically list the HLICs for all present HARTs +in the system. + +Required properties: +- compatible : "riscv,cpu-intc" +- #interrupt-cells : should be <1>. The interrupt sources are defined by the + RISC-V supervisor ISA manual, with only the following three interrupts being + defined for supervisor mode: + - Source 1 is the supervisor software interrupt, which can be sent by an SBI + call and is reserved for use by software. + - Source 5 is the supervisor timer interrupt, which can be configured by + SBI calls and implements a one-shot timer. + - Source 9 is the supervisor external interrupt, which chains to all other + device interrupts. +- interrupt-controller : Identifies the node as an interrupt controller + +Furthermore, this interrupt-controller MUST be embedded inside the cpu +definition of the hart whose CSRs control these local interrupts. + +An example device tree entry for a HLIC is show below. + + cpu1: cpu@1 { + compatible = "riscv"; + ... + cpu1-intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc"; + interrupt-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt new file mode 100644 index 000000000..19af68785 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt @@ -0,0 +1,50 @@ +* Samsung Exynos Interrupt Combiner Controller + +Samsung's Exynos4 architecture includes a interrupt combiner controller which +can combine interrupt sources as a group and provide a single interrupt request +for the group. The interrupt request from each group are connected to a parent +interrupt controller, such as GIC in case of Exynos4210. + +The interrupt combiner controller consists of multiple combiners. Up to eight +interrupt sources can be connected to a combiner. The combiner outputs one +combined interrupt for its eight interrupt sources. The combined interrupt +is usually connected to a parent interrupt controller. + +A single node in the device tree is used to describe the interrupt combiner +controller module (which includes multiple combiners). A combiner in the +interrupt controller module shares config/control registers with other +combiners. For example, a 32-bit interrupt enable/disable config register +can accommodate up to 4 interrupt combiners (with each combiner supporting +up to 8 interrupt sources). + +Required properties: +- compatible: should be "samsung,exynos4210-combiner". +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: should be <2>. The meaning of the cells are + * First Cell: Combiner Group Number. + * Second Cell: Interrupt number within the group. +- reg: Base address and size of interrupt combiner registers. +- interrupts: The list of interrupts generated by the combiners which are then + connected to a parent interrupt controller. The format of the interrupt + specifier depends in the interrupt parent controller. + +Optional properties: +- samsung,combiner-nr: The number of interrupt combiners supported. If this + property is not specified, the default number of combiners is assumed + to be 16. + + +Example: + + The following is a an example from the Exynos4210 SoC dtsi file. + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt new file mode 100644 index 000000000..c54c5a9a2 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt @@ -0,0 +1,53 @@ +Samsung S3C24XX Interrupt Controllers + +The S3C24XX SoCs contain a custom set of interrupt controllers providing a +varying number of interrupt sources. The set consists of a main- and sub- +controller and on newer SoCs even a second main controller. + +Required properties: +- compatible: Compatible property value should be "samsung,s3c2410-irq" + for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 4 and interrupt descriptor shall + have the following format: + + + ctrl_num contains the controller to use: + - 0 ... main controller + - 1 ... sub controller + - 2 ... second main controller on s3c2416 and s3c2450 + parent_irq contains the parent bit in the main controller and will be + ignored in main controllers + ctrl_irq contains the interrupt bit of the controller + type contains the trigger type to use + +Example: + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells=<4>; + }; + + [...] + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupt-parent = <&subintc>; + interrupts = <1 28 0 4>, <1 28 1 4>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 30 0 3>, <0 8 0 3>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml new file mode 100644 index 000000000..b9a61c9f7 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Platform-Level Interrupt Controller (PLIC) + +description: + SiFive SOCs include an implementation of the Platform-Level Interrupt Controller + (PLIC) high-level specification in the RISC-V Privileged Architecture + specification. The PLIC connects all external interrupts in the system to all + hart contexts in the system, via the external interrupt source in each hart. + + A hart context is a privilege mode in a hardware execution thread. For example, + in an 4 core system with 2-way SMT, you have 8 harts and probably at least two + privilege modes per hart; machine mode and supervisor mode. + + Each interrupt can be enabled on per-context basis. Any context can claim + a pending enabled interrupt and then release it once it has been handled. + + Each interrupt has a configurable priority. Higher priority interrupts are + serviced first. Each context can specify a priority threshold. Interrupts + with priority below this threshold will not cause the PLIC to raise its + interrupt line leading to the context. + + While the PLIC supports both edge-triggered and level-triggered interrupts, + interrupt handlers are oblivious to this distinction and therefore it is not + specified in the PLIC device-tree binding. + + While the RISC-V ISA doesn't specify a memory layout for the PLIC, the + "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that + contains a specific memory layout, which is documented in chapter 8 of the + SiFive U5 Coreplex Series Manual . + +maintainers: + - Sagar Kadam + - Paul Walmsley + - Palmer Dabbelt + +properties: + compatible: + items: + - const: sifive,fu540-c000-plic + - const: sifive,plic-1.0.0 + + reg: + maxItems: 1 + + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + interrupts-extended: + minItems: 1 + description: + Specifies which contexts are connected to the PLIC, with "-1" specifying + that a context is not present. Each node pointed to should be a + riscv,cpu-intc node, which has a riscv node as parent. + + riscv,ndev: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + Specifies how many external interrupts are supported by this controller. + +required: + - compatible + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + - reg + - interrupts-extended + - riscv,ndev + +additionalProperties: false + +examples: + - | + plic: interrupt-controller@c000000 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + interrupt-controller; + interrupts-extended = < + &cpu0_intc 11 + &cpu1_intc 11 &cpu1_intc 9 + &cpu2_intc 11 &cpu2_intc 9 + &cpu3_intc 11 &cpu3_intc 9 + &cpu4_intc 11 &cpu4_intc 9>; + reg = <0xc000000 0x4000000>; + riscv,ndev = <10>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt new file mode 100644 index 000000000..355c18a3a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sigma,smp8642-intc.txt @@ -0,0 +1,48 @@ +Sigma Designs SMP86xx/SMP87xx secondary interrupt controller + +Required properties: +- compatible: should be "sigma,smp8642-intc" +- reg: physical address of MMIO region +- ranges: address space mapping of child nodes +- interrupt-controller: boolean +- #address-cells: should be <1> +- #size-cells: should be <1> + +One child node per control block with properties: +- reg: address of registers for this control block +- interrupt-controller: boolean +- #interrupt-cells: should be <2>, interrupt index and flags per interrupts.txt +- interrupts: interrupt spec of primary interrupt controller + +Example: + +interrupt-controller@6e000 { + compatible = "sigma,smp8642-intc"; + reg = <0x6e000 0x400>; + ranges = <0x0 0x6e000 0x400>; + interrupt-parent = <&gic>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <1>; + + irq0: interrupt-controller@0 { + reg = <0x000 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + + irq1: interrupt-controller@100 { + reg = <0x100 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + + irq2: interrupt-controller@300 { + reg = <0x300 0x100>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt new file mode 100644 index 000000000..9a5d56243 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt @@ -0,0 +1,24 @@ +* ARC700 incore Interrupt Controller + + The core interrupt controller provides 32 prioritised interrupts (2 levels) + to ARC700 core. + +Properties: + +- compatible: "snps,arc700-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1>. + + Single Cell "interrupts" property of a device specifies the IRQ number + between 0 to 31 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt new file mode 100644 index 000000000..a5c1db95b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -0,0 +1,46 @@ +* ARC-HS Interrupt Distribution Unit + + This optional 2nd level interrupt controller can be used in SMP configurations + for dynamic IRQ routing, load balancing of common/external IRQs towards core + intc. + +Properties: + +- compatible: "snps,archs-idu-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1> or <2>. + + Value of the first cell specifies the "common" IRQ from peripheral to IDU. + Number N of the particular interrupt line of IDU corresponds to the line N+24 + of the core interrupt controller. + + The (optional) second cell specifies any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = NOT SUPPORTED (high-to-low edge triggered) + 4 = active high level-sensitive <<< DEFAULT + 8 = NOT SUPPORTED (active low level-sensitive) + When no second cell is specified, the interrupt is assumed to be level + sensitive. + + The interrupt controller is accessed via the special ARC AUX register + interface, hence "reg" property is not specified. + +Example: + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + some_device: serial@c0fc1000 { + interrupt-parent = <&idu_intc>; + interrupts = <0>; /* upstream idu IRQ #24 */ + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt new file mode 100644 index 000000000..69f326d6a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt @@ -0,0 +1,22 @@ +* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA) + +Properties: + +- compatible: "snps,archs-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1>. + + Single Cell "interrupts" property of a device specifies the IRQ number + between 16 to 256 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + + intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <16 17 18 19 20 21 22 23 24 25>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt new file mode 100644 index 000000000..2db59df94 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt @@ -0,0 +1,43 @@ +Synopsys DesignWare APB interrupt controller (dw_apb_ictl) + +Synopsys DesignWare provides interrupt controller IP for APB known as +dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with +APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt +controller in some SoCs, e.g. Hisilicon SD5203. + +Required properties: +- compatible: shall be "snps,dw-apb-ictl" +- reg: physical base address of the controller and length of memory mapped + region starting with ENABLE_LOW register +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1 + +Additional required property when it's used as secondary interrupt controller: +- interrupts: interrupt reference to primary interrupt controller + +The interrupt sources map to the corresponding bits in the interrupt +registers, i.e. +- 0 maps to bit 0 of low interrupts, +- 1 maps to bit 1 of low interrupts, +- 32 maps to bit 0 of high interrupts, +- 33 maps to bit 1 of high interrupts, +- (optional) fast interrupts start at 64. + +Example: + /* dw_apb_ictl is used as secondary interrupt controller */ + aic: interrupt-controller@3000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3000 0xc00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + /* dw_apb_ictl is used as primary interrupt controller */ + vic: interrupt-controller@10130000 { + compatible = "snps,dw-apb-ictl"; + reg = <0x10130000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt new file mode 100644 index 000000000..dac0846fe --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt @@ -0,0 +1,31 @@ +Socionext SynQuacer External Interrupt Unit (EXIU) + +The Socionext Synquacer SoC has an external interrupt unit (EXIU) +that forwards a block of 32 configurable input lines to 32 adjacent +level-high type GICv3 SPIs. + +Required properties: + +- compatible : Should be "socionext,synquacer-exiu". +- reg : Specifies base physical address and size of the + control registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent + ones the EXIU forwards its interrups to. + +Notes: + +- Only SPIs can use the EXIU as an interrupt parent. + +Example: + + exiu: interrupt-controller@510c0000 { + compatible = "socionext,synquacer-exiu"; + reg = <0x0 0x510c0000 0x0 0x20>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + socionext,spi-base = <112>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml new file mode 100644 index 000000000..f89ebde76 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier AIDET + +description: | + UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC + (Generic Interrupt Controller). GIC itself can handle only high level and + rising edge interrupts. The AIDET provides logic inverter to support low + level and falling edge interrupts. + +maintainers: + - Masahiro Yamada + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - socionext,uniphier-ld4-aidet + - socionext,uniphier-pro4-aidet + - socionext,uniphier-sld8-aidet + - socionext,uniphier-pro5-aidet + - socionext,uniphier-pxs2-aidet + - socionext,uniphier-ld6b-aidet + - socionext,uniphier-ld11-aidet + - socionext,uniphier-ld20-aidet + - socionext,uniphier-pxs3-aidet + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: | + The first cell defines the interrupt number (corresponds to the SPI + interrupt number of GIC). The second cell specifies the trigger type as + defined in interrupts.txt in this directory. + const: 2 + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + interrupt-controller@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt new file mode 100644 index 000000000..a407c499b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt @@ -0,0 +1,44 @@ +* SPEAr Shared IRQ layer (shirq) + +SPEAr3xx architecture includes shared/multiplexed irqs for certain set +of devices. The multiplexor provides a single interrupt to parent +interrupt controller (VIC) on behalf of a group of devices. + +There can be multiple groups available on SPEAr3xx variants but not +exceeding 4. The number of devices in a group can differ, further they +may share same set of status/mask registers spanning across different +bit masks. Also in some cases the group may not have enable or other +registers. This makes software little complex. + +A single node in the device tree is used to describe the shared +interrupt multiplexor (one node for all groups). A group in the +interrupt controller shares config/control registers with other groups. +For example, a 32-bit interrupt enable/disable config register can +accommodate up to 4 interrupt groups. + +Required properties: + - compatible: should be, either of + - "st,spear300-shirq" + - "st,spear310-shirq" + - "st,spear320-shirq" + - interrupt-controller: Identifies the node as an interrupt controller. + - #interrupt-cells: should be <1> which basically contains the offset + (starting from 0) of interrupts for all the groups. + - reg: Base address and size of shirq registers. + - interrupts: The list of interrupts generated by the groups which are + then connected to a parent interrupt controller. Each group is + associated with one of the interrupts, hence number of interrupts (to + parent) is equal to number of groups. The format of the interrupt + specifier depends in the interrupt parent controller. + +Example: + +The following is an example from the SPEAr320 SoC dtsi file. + +shirq: interrupt-controller@b3000000 { + compatible = "st,spear320-shirq"; + reg = <0xb3000000 0x1000>; + interrupts = <28 29 30 1>; + #interrupt-cells = <1>; + interrupt-controller; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt new file mode 100644 index 000000000..ced601406 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt @@ -0,0 +1,35 @@ +STMicroelectronics STi System Configuration Controlled IRQs +----------------------------------------------------------- + +On STi based systems; External, CTI (Core Sight), PMU (Performance Management), +and PL310 L2 Cache IRQs are controlled using System Configuration registers. +This driver is used to unmask them prior to use. + +Required properties: +- compatible : Should be set to one of: + "st,stih415-irq-syscfg" + "st,stih416-irq-syscfg" + "st,stih407-irq-syscfg" + "st,stid127-irq-syscfg" +- st,syscfg : Phandle to Cortex-A9 IRQ system config registers +- st,irq-device : Array of IRQs to enable - should be 2 in length +- st,fiq-device : Array of FIQs to enable - should be 2 in length + +Optional properties: +- st,invert-ext : External IRQs can be inverted at will. This property inverts + these IRQs using bitwise logic. A number of defines have been + provided for convenience: + ST_IRQ_SYSCFG_EXT_1_INV + ST_IRQ_SYSCFG_EXT_2_INV + ST_IRQ_SYSCFG_EXT_3_INV +Example: + +irq-syscfg { + compatible = "st,stih416-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = , + ; + st,fiq-device = , + ; + st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml new file mode 100644 index 000000000..2a5b29567 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32 External Interrupt Controller Device Tree Bindings + +maintainers: + - Alexandre Torgue + - Ludovic Barre + +properties: + compatible: + oneOf: + - items: + - enum: + - st,stm32-exti + - st,stm32h7-exti + - items: + - enum: + - st,stm32mp1-exti + - const: syscon + + "#interrupt-cells": + const: 2 + + reg: + maxItems: 1 + + interrupt-controller: true + + hwlocks: + maxItems: 1 + description: + Reference to a phandle of a hardware spinlock provider node. + + interrupts: + description: + Interrupts references to primary interrupt controller + +required: + - "#interrupt-cells" + - compatible + - reg + - interrupt-controller + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32-exti + then: + properties: + interrupts: + minItems: 1 + maxItems: 32 + required: + - interrupts + - if: + properties: + compatible: + contains: + enum: + - st,stm32h7-exti + then: + properties: + interrupts: + minItems: 1 + maxItems: 96 + required: + - interrupts + +additionalProperties: false + +examples: + - | + //Example 1 + exti1: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + }; + + //Example 2 + exti2: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt new file mode 100644 index 000000000..341ae5909 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt @@ -0,0 +1,14 @@ +TS-4800 FPGA interrupt controller + +TS-4800 FPGA has an internal interrupt controller. When one of the +interrupts is triggered, the SoC is notified, usually using a GPIO as +parent interrupt source. + +Required properties: +- compatible: should be "technologic,ts4800-irqc" +- interrupt-controller: identifies the node as an interrupt controller +- reg: physical base address of the controller and length of memory mapped + region +- #interrupt-cells: specifies the number of cells needed to encode an interrupt + source, should be 1. +- interrupts: specifies the interrupt line in the interrupt-parent controller diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt new file mode 100644 index 000000000..ee3f9c351 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt @@ -0,0 +1,103 @@ +C6X Interrupt Chips +------------------- + +* C64X+ Core Interrupt Controller + + The core interrupt controller provides 16 prioritized interrupts to the + C64X+ core. Priority 0 and 1 are used for reset and NMI respectively. + Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt + sources coming from outside the core. + + Required properties: + -------------------- + - compatible: Should be "ti,c64x+core-pic"; + - #interrupt-cells: <1> + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the core interrupt priority level (4-15) where + 4 is highest priority and 15 is lowest priority. + + Example + ------- + core_pic: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <1>; + compatible = "ti,c64x+core-pic"; + }; + + + +* C64x+ Megamodule Interrupt Controller + + The megamodule PIC consists of four interrupt mupliplexers each of which + combine up to 32 interrupt inputs into a single interrupt output which + may be cascaded into the core interrupt controller. The megamodule PIC + has a total of 12 outputs cascading into the core interrupt controller. + One for each core interrupt priority level. In addition to the combined + interrupt sources, individual megamodule interrupts may be cascaded to + the core interrupt controller. When an individual interrupt is cascaded, + it is no longer handled through a megamodule interrupt combiner and is + considered to have the core interrupt controller as the parent. + + Required properties: + -------------------- + - compatible: "ti,c64x+megamod-pic" + - interrupt-controller + - #interrupt-cells: <1> + - reg: base address and size of register area + - interrupts: This should have four cells; one for each interrupt combiner. + The cells contain the core priority interrupt to which the + corresponding combiner output is wired. + + Optional properties: + -------------------- + - ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core + priority interrupts. The first cell corresponds to + core priority 4 and the last cell corresponds to + core priority 15. The value of each cell is the + megamodule interrupt source which is MUXed to + the core interrupt corresponding to the cell + position. Allowed values are 4 - 127. Mapping for + interrupts 0 - 3 (combined interrupt sources) are + ignored. + + Interrupt Specifier Definition + ------------------------------ + Single cell specifying the megamodule interrupt source (4-127). Note that + interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will + use the core interrupt controller as their parent and the specifier will + be the core priority level, not the megamodule interrupt number. + + Examples + -------- + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + }; + + This is a minimal example where all individual interrupts go through a + combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped + to interrupt 13, etc. + + + megamod_pic: interrupt-controller@1800000 { + compatible = "ti,c64x+megamod-pic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1800000 0x1000>; + interrupt-parent = <&core_pic>; + interrupts = < 12 13 14 15 >; + ti,c64x+megamod-pic-mux = < 0 0 0 0 + 32 0 0 0 + 0 0 0 0 >; + }; + + This the same as the first example except that megamodule interrupt 32 is + mapped directly to core priority interrupt 8. The node using this interrupt + must set the core controller as its interrupt parent and use 8 in the + interrupt specifier value. diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt new file mode 100644 index 000000000..597e8a089 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt @@ -0,0 +1,27 @@ +* TI Common Platform Interrupt Controller + +Common Platform Interrupt Controller (cp_intc) is used on +OMAP-L1x SoCs and can support several configurable number +of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,cp-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <101>; + reg = <0xfffee000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt new file mode 100644 index 000000000..5f94d7739 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -0,0 +1,36 @@ +Keystone 2 IRQ controller IP + +On Keystone SOCs, DSP cores can send interrupts to ARM +host using the IRQ controller IP. It provides 28 IRQ signals to ARM. +The IRQ handler running on HOST OS can identify DSP signal source by +analyzing SRCCx bits in IPCARx registers. This is one of the component +used by the IPC mechanism used on Keystone SOCs. + +Required Properties: +- compatible: should be "ti,keystone-irq" +- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to + access device control registers and the offset inside + device control registers range. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source should be 1. +- interrupts: interrupt reference to primary interrupt controller + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + kirq0: keystone_irq0@26202a0 { + compatible = "ti,keystone-irq"; + ti,syscon-dev = <&devctrl 0x2a0>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + dsp0: dsp0 { + compatible = "linux,rproc-user"; + ... + interrupt-parent = <&kirq0>; + interrupts = <10 2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt new file mode 100644 index 000000000..38ce5d037 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt @@ -0,0 +1,28 @@ +Omap2/3 intc controller + +On TI omap2 and 3 the intc interrupt controller can provide +96 or 128 IRQ signals to the ARM host depending on the SoC. + +Required Properties: +- compatible: should be one of + "ti,omap2-intc" + "ti,omap3-intc" + "ti,dm814-intc" + "ti,dm816-intc" + "ti,am33xx-intc" + +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 1 for intc +- interrupts: interrupt reference to primary interrupt controller + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + intc: interrupt-controller@48200000 { + compatible = "ti,omap3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt new file mode 100644 index 000000000..f2583e6ec --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt @@ -0,0 +1,27 @@ +* OMAP Interrupt Controller + +OMAP2/3 are using a TI interrupt controller that can support several +configurable number of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,omap2-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x48200000 0x1000>; + }; + diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu new file mode 100644 index 000000000..422d6908f --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu @@ -0,0 +1,31 @@ +TI OMAP4 Wake-up Generator + +All TI OMAP4/5 (and their derivatives) an interrupt controller that +routes interrupts to the GIC, and also serves as a wakeup source. It +is also referred to as "WUGEN-MPU", hence the name of the binding. + +Required properties: + +- compatible : should contain at least "ti,omap4-wugen-mpu" or + "ti,omap5-wugen-mpu" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs + are explicitly forbidden. + +Example: + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48281000 0x1000>; + interrupt-parent = <&gic>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml new file mode 100644 index 000000000..1c4c009de --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI PRU-ICSS Local Interrupt Controller + +maintainers: + - Suman Anna + +description: | + Each PRU-ICSS has a single interrupt controller instance that is common + to all the PRU cores. Most interrupt controllers can route 64 input events + which are then mapped to 10 possible output interrupts through two levels + of mapping. The input events can be triggered by either the PRUs and/or + various other PRUSS internal and external peripherals. The first 2 output + interrupts (0, 1) are fed exclusively to the internal PRU cores, with the + remaining 8 (2 through 9) connected to external interrupt controllers + including the MPU and/or other PRUSS instances, DSPs or devices. + + The property "ti,irqs-reserved" is used for denoting the connection + differences on the output interrupts 2 through 9. If this property is not + defined, it implies that all the PRUSS INTC output interrupts 2 through 9 + (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt + controller. + + The K3 family of SoCs can handle 160 input events that can be mapped to 20 + different possible output interrupts. The additional output interrupts (10 + through 19) are connected to new sub-modules within the ICSSG instances. + + This interrupt-controller node should be defined as a child node of the + corresponding PRUSS node. The node should be named "interrupt-controller". + +properties: + compatible: + enum: + - ti,pruss-intc + - ti,icssg-intc + description: | + Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs, + AM335x family of SoCs, + AM437x family of SoCs, + AM57xx family of SoCs + 66AK2G family of SoCs + Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + description: | + All the interrupts generated towards the main host processor in the SoC. + A shared interrupt can be skipped if the desired destination and usage is + by a different processor/device. + + interrupt-names: + minItems: 1 + maxItems: 8 + items: + pattern: host_intr[0-7] + description: | + Should use one of the above names for each valid host event interrupt + connected to Arm interrupt controller, the name should match the + corresponding host event interrupt number. + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + Client users shall use the PRU System event number (the interrupt source + that the client is interested in) [cell 1], PRU channel [cell 2] and PRU + host_event (target) [cell 3] as the value of the interrupts property in + their node. The system events can be mapped to some output host + interrupts through 2 levels of many-to-one mapping i.e. events to channel + mapping and channels to host interrupts so through this property entire + mapping is provided. + + ti,irqs-reserved: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC + output interrupts 2 through 9) that are not connected to the Arm interrupt + controller or are shared and used by other devices or processors in the + SoC. Define this property when any of 8 interrupts should not be handled + by Arm interrupt controller. + Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt + connected to MPU + - AM65x and J721E SoCs have "host_intr5", "host_intr6" and + "host_intr7" interrupts connected to MPU, and other ICSSG + instances. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + /* AM33xx PRU-ICSS */ + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + - | + + /* AM4376 PRU-ICSS */ + #include + pruss@0 { + compatible = "ti,am4376-pruss"; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", + "host_intr6", "host_intr7"; + ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */ + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml new file mode 100644 index 000000000..b5af12011 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Aggregator + +maintainers: + - Lokesh Vutla + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Aggregator (INTA) provides a centralized machine + which handles the termination of system events to that they can + be coherently processed by the host(s) in the system. A maximum + of 64 events can be mapped to a single interrupt. + + Interrupt Aggregator + +-----------------------------------------+ + | Intmap VINT | + | +--------------+ +------------+ | + m ------>| | vint | bit | | 0 |.....|63| vint0 | + . | +--------------+ +------------+ | +------+ + . | . . | | HOST | + Globalevents ------>| . . |----->| IRQ | + . | . . | | CTRL | + . | . . | +------+ + n ------>| +--------------+ +------------+ | + | | vint | bit | | 0 |.....|63| vintx | + | +--------------+ +------------+ | + | | + | Unmap | + | +--------------+ | + Unmapped events ---->| | umapidx |-------------------------> Globalevents + | +--------------+ | + | | + +-----------------------------------------+ + + Configuration of these Intmap registers that maps global events to vint is + done by a system controller (like the Device Memory and Security Controller + on AM654 SoC). Driver should request the system controller to get the range + of global events and vints assigned to the requesting host. Management + of these requested resources should be handled by driver and requests + system controller to map specific global event to vint, bit pair. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-inta + + reg: + maxItems: 1 + + interrupt-controller: true + + msi-controller: true + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTA output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for inta output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + + ti,unmapped-event-sources: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + Array of phandles to DMA controllers where the unmapped events originate. + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + interrupt-parent = <&main_navss_intr>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,interrupt-ranges = <0 0 256>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000..e12aee42b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +unevaluatedProperties: false + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt new file mode 100644 index 000000000..0a4ce1051 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt @@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; -- cgit v1.2.3