From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../devicetree/bindings/pci/hisilicon-pcie.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt (limited to 'Documentation/devicetree/bindings/pci/hisilicon-pcie.txt') diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 000000000..d6796ef54 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,43 @@ +HiSilicon Hip05 and Hip06 PCIe host bridge DT description + +HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. +It shares common functions with the PCIe DesignWare core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Additional properties are described here: + +Required properties +- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Hip05 Example (note that Hip06 is the same except compatible): + pcie@b0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + }; -- cgit v1.2.3