From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../bindings/phy/brcm,brcmstb-usb-phy.txt | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt (limited to 'Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt') diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 000000000..698aacbdc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,86 @@ +Broadcom STB USB PHY + +Required properties: +- compatible: should be one of + "brcm,brcmstb-usb-phy" + "brcm,bcm7216-usb-phy" + "brcm,bcm7211-usb-phy" + +- reg and reg-names properties requirements are specific to the + compatible string. + "brcm,brcmstb-usb-phy": + - reg: 1 or 2 offset and length pairs. One for the base CTRL registers + and an optional pair for systems with USB 3.x support + - reg-names: not specified + "brcm,bcm7216-usb-phy": + - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL + registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl" + "brcm,bcm7211-usb-phy": + - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, + USB_PHY and USB_MDIO registers and an optional pair + for the BDC registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" + +- #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- interrupts: wakeup interrupt +- interrupt-names: "wakeup" +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. +- brcm,syscon-piarbctl: phandle to syscon for handling config registers +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. + + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; + +usb-phy@29f0200 { + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + compatible = "brcm,bcm7211-usb-phy"; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; +}; -- cgit v1.2.3