From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../bindings/phy/allwinner,sun4i-a10-usb-phy.yaml | 105 +++ .../bindings/phy/allwinner,sun50i-a64-usb-phy.yaml | 106 +++ .../bindings/phy/allwinner,sun50i-h6-usb-phy.yaml | 105 +++ .../bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 49 ++ .../bindings/phy/allwinner,sun5i-a13-usb-phy.yaml | 93 +++ .../phy/allwinner,sun6i-a31-mipi-dphy.yaml | 61 ++ .../bindings/phy/allwinner,sun6i-a31-usb-phy.yaml | 119 ++++ .../bindings/phy/allwinner,sun8i-a23-usb-phy.yaml | 102 +++ .../bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml | 122 ++++ .../bindings/phy/allwinner,sun8i-h3-usb-phy.yaml | 137 ++++ .../bindings/phy/allwinner,sun8i-r40-usb-phy.yaml | 119 ++++ .../bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml | 86 +++ .../bindings/phy/allwinner,sun9i-a80-usb-phy.yaml | 135 ++++ .../bindings/phy/amlogic,g12a-usb2-phy.yaml | 78 +++ .../bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml | 59 ++ .../phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 35 + .../bindings/phy/amlogic,meson-axg-pcie.yaml | 52 ++ .../bindings/phy/amlogic,meson8b-usb2-phy.yaml | 64 ++ .../devicetree/bindings/phy/apm-xgene-phy.txt | 76 ++ .../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 + .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 34 + .../devicetree/bindings/phy/berlin-sata-phy.txt | 36 + .../devicetree/bindings/phy/berlin-usb-phy.txt | 16 + .../bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 79 +++ .../bindings/phy/brcm,brcmstb-usb-phy.txt | 86 +++ .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 ++ .../devicetree/bindings/phy/brcm,kona-usb2-phy.txt | 15 + .../bindings/phy/brcm,mdio-mux-bus-pci.txt | 27 + .../devicetree/bindings/phy/brcm,ns2-drd-phy.txt | 30 + .../devicetree/bindings/phy/brcm,sr-pcie-phy.txt | 41 ++ .../bindings/phy/brcm,stingray-usb-phy.txt | 32 + .../devicetree/bindings/phy/brcm-sata-phy.txt | 58 ++ .../devicetree/bindings/phy/calxeda-combophy.yaml | 50 ++ .../devicetree/bindings/phy/cdns,dphy.txt | 20 + .../devicetree/bindings/phy/cdns,salvo-phy.yaml | 52 ++ .../devicetree/bindings/phy/dm816x-phy.txt | 24 + .../devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt | 20 + .../bindings/phy/hisilicon,hi3660-usb3.yaml | 60 ++ .../devicetree/bindings/phy/hix5hd2-phy.txt | 22 + .../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++ .../bindings/phy/intel,lgm-emmc-phy.yaml | 75 ++ .../devicetree/bindings/phy/intel,lgm-usb-phy.yaml | 58 ++ .../devicetree/bindings/phy/keystone-usb-phy.txt | 19 + .../bindings/phy/lantiq,vrx200-pcie-phy.yaml | 95 +++ .../bindings/phy/marvell,mmp3-hsic-phy.yaml | 44 ++ .../bindings/phy/marvell,mmp3-usb-phy.yaml | 42 ++ .../devicetree/bindings/phy/meson-gxl-usb2-phy.txt | 21 + .../devicetree/bindings/phy/mixel,mipi-dsi-phy.txt | 29 + .../devicetree/bindings/phy/mxs-usb-phy.txt | 32 + .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 778 +++++++++++++++++++++ .../bindings/phy/nvidia,tegra20-usb-phy.txt | 74 ++ .../bindings/phy/phy-armada38x-comphy.txt | 48 ++ .../devicetree/bindings/phy/phy-ath79-usb.txt | 18 + .../devicetree/bindings/phy/phy-bindings.txt | 72 ++ .../devicetree/bindings/phy/phy-cadence-sierra.txt | 70 ++ .../bindings/phy/phy-cadence-torrent.yaml | 208 ++++++ .../devicetree/bindings/phy/phy-cpcap-usb.txt | 40 ++ .../devicetree/bindings/phy/phy-da8xx-usb.txt | 40 ++ .../bindings/phy/phy-hi3798cv200-combphy.txt | 59 ++ .../devicetree/bindings/phy/phy-hi6220-usb.txt | 16 + .../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 71 ++ .../bindings/phy/phy-lantiq-rcu-usb2.txt | 40 ++ .../bindings/phy/phy-lpc18xx-usb-otg.txt | 26 + .../bindings/phy/phy-mapphone-mdm6600.txt | 29 + .../devicetree/bindings/phy/phy-miphy28lp.txt | 117 ++++ .../devicetree/bindings/phy/phy-miphy365x.txt | 77 ++ .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 +++++ .../devicetree/bindings/phy/phy-mtk-ufs.txt | 38 + .../devicetree/bindings/phy/phy-mtk-xsphy.txt | 109 +++ .../devicetree/bindings/phy/phy-mvebu-comphy.txt | 94 +++ .../devicetree/bindings/phy/phy-mvebu-utmi.txt | 38 + .../devicetree/bindings/phy/phy-mvebu.txt | 42 ++ .../devicetree/bindings/phy/phy-ocelot-serdes.txt | 43 ++ .../devicetree/bindings/phy/phy-pxa-usb.txt | 18 + .../bindings/phy/phy-rockchip-inno-hdmi.txt | 43 ++ .../bindings/phy/phy-rockchip-inno-usb2.yaml | 155 ++++ .../devicetree/bindings/phy/phy-rockchip-typec.txt | 84 +++ .../devicetree/bindings/phy/phy-stih407-usb.txt | 24 + .../devicetree/bindings/phy/phy-stm32-usbphyc.txt | 73 ++ .../devicetree/bindings/phy/phy-tegra194-p2u.txt | 28 + .../devicetree/bindings/phy/pistachio-usb-phy.txt | 29 + .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 + .../bindings/phy/qcom,ipq806x-usb-phy-hs.yaml | 57 ++ .../bindings/phy/qcom,ipq806x-usb-phy-ss.yaml | 75 ++ .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 318 +++++++++ .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 212 ++++++ .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 180 +++++ .../devicetree/bindings/phy/qcom,usb-8x16-phy.txt | 76 ++ .../devicetree/bindings/phy/qcom,usb-hs-28nm.yaml | 90 +++ .../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 84 +++ .../devicetree/bindings/phy/qcom,usb-hsic-phy.txt | 65 ++ .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 80 +++ .../devicetree/bindings/phy/qcom,usb-ss.yaml | 83 +++ .../bindings/phy/qcom-apq8064-sata-phy.txt | 24 + .../bindings/phy/qcom-ipq806x-sata-phy.txt | 23 + .../devicetree/bindings/phy/qcom-pcie2-phy.txt | 42 ++ .../bindings/phy/qcom-usb-ipq4019-phy.yaml | 52 ++ .../devicetree/bindings/phy/ralink-usb-phy.txt | 23 + .../devicetree/bindings/phy/rcar-gen2-phy.txt | 112 +++ .../devicetree/bindings/phy/rcar-gen3-phy-pcie.txt | 24 + .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 118 ++++ .../devicetree/bindings/phy/renesas,usb3-phy.yaml | 79 +++ .../bindings/phy/rockchip,px30-dsi-dphy.yaml | 70 ++ .../devicetree/bindings/phy/rockchip-dp-phy.txt | 26 + .../devicetree/bindings/phy/rockchip-emmc-phy.txt | 38 + .../bindings/phy/rockchip-mipi-dphy-rx0.yaml | 73 ++ .../devicetree/bindings/phy/rockchip-pcie-phy.txt | 36 + .../devicetree/bindings/phy/rockchip-usb-phy.txt | 52 ++ .../devicetree/bindings/phy/samsung,ufs-phy.yaml | 75 ++ .../devicetree/bindings/phy/samsung-phy.txt | 209 ++++++ .../bindings/phy/socionext,uniphier-ahci-phy.yaml | 76 ++ .../bindings/phy/socionext,uniphier-pcie-phy.yaml | 77 ++ .../bindings/phy/socionext,uniphier-usb2-phy.yaml | 85 +++ .../phy/socionext,uniphier-usb3hs-phy.yaml | 107 +++ .../phy/socionext,uniphier-usb3ss-phy.yaml | 96 +++ .../devicetree/bindings/phy/st-spear-miphy.txt | 15 + .../devicetree/bindings/phy/ti,omap-usb2.yaml | 76 ++ .../bindings/phy/ti,phy-am654-serdes.txt | 82 +++ .../devicetree/bindings/phy/ti,phy-gmii-sel.yaml | 104 +++ .../devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 231 ++++++ Documentation/devicetree/bindings/phy/ti-phy.txt | 98 +++ .../devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 +++ 122 files changed, 9318 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/apm-xgene-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm-sata-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/calxeda-combophy.yaml create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt create mode 100644 Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/dm816x-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml create mode 100644 Documentation/devicetree/bindings/phy/hix5hd2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/keystone-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/mxs-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-ath79-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-bindings.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml create mode 100644 Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-pxa-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt create mode 100644 Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/ralink-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml create mode 100644 Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml create mode 100644 Documentation/devicetree/bindings/phy/st-spear-miphy.txt create mode 100644 Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml create mode 100644 Documentation/devicetree/bindings/phy/ti-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml (limited to 'Documentation/devicetree/bindings/phy') diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml new file mode 100644 index 000000000..94ac23687 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-usb-phy + - allwinner,sun7i-a20-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + maxItems: 1 + description: USB PHY bus clock + + clock-names: + const: usb_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + usbphy: phy@1c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-phy"; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&ccu CLK_USB_PHY>; + clock-names = "usb_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml new file mode 100644 index 000000000..fd6e126fc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A64 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun50i-a64-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun50i-a64-usb-phy"; + reg = <0x01c19400 0x14>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml new file mode 100644 index 000000000..767041100 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun50i-h6-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU3 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu3 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb3_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb3_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb3_vbus-supply: + description: Regulator controlling USB3 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@5100400 { + #phy-cells = <1>; + compatible = "allwinner,sun50i-h6-usb-phy"; + reg = <0x05100400 0x24>, + <0x05101800 0x4>, + <0x05311800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb3_reset"; + usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml new file mode 100644 index 000000000..c03b83103 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Ondrej Jirman +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb3-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Allwinner H6 USB3 PHY + +maintainers: + - Ondrej Jirman + +properties: + compatible: + enum: + - allwinner,sun50i-h6-usb3-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - resets + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + #include + phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml new file mode 100644 index 000000000..9b319381d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A13 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun5i-a13-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb_phy"; + resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", "usb1_reset"; + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml new file mode 100644 index 000000000..d0b541a46 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 0 + + compatible: + oneOf: + - const: allwinner,sun6i-a31-mipi-dphy + - items: + - const: allwinner,sun50i-a64-mipi-dphy + - const: allwinner,sun6i-a31-mipi-dphy + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + dphy0: d-phy@1ca1000 { + compatible = "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu 23>, <&ccu 97>; + clock-names = "bus", "mod"; + resets = <&ccu 4>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml new file mode 100644 index 000000000..b0ed01bbf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun6i-a31-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml new file mode 100644 index 000000000..b0674406f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + enum: + - allwinner,sun8i-a23-usb-phy + - allwinner,sun8i-a33-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-phy"; + reg = <0x01c19400 0x10>, <0x01c1a800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; + reset-names = "usb0_reset", + "usb1_reset"; + usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml new file mode 100644 index 000000000..48dc9c834 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A83t USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-a83t-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + - description: USB HSIC 12MHz clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + - const: usb2_hsic_12M + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-a83t-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x14>, + <0x01c1b800 0x14>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_HSIC>, + <&ccu CLK_USB_HSIC_12M>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb2_hsic_12M"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_HSIC>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml new file mode 100644 index 000000000..60c344585 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H3 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-h3-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + - description: PHY PMU3 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + - const: pmu2 + - const: pmu3 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + - description: USB Host 2 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + - const: usb3_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + - description: USB Host 3 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + - const: usb3_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + + usb3_vbus-supply: + description: Regulator controlling USB3 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + usb3_vbus-supply = <®_usb3_vbus>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml new file mode 100644 index 000000000..a2bb36790 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R40 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-r40-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + - description: PHY PMU1 registers + - description: PHY PMU2 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + - const: pmu1 + - const: pmu2 + + clocks: + items: + - description: USB OTG PHY bus clock + - description: USB Host 0 PHY bus clock + - description: USB Host 1 PHY bus clock + + clock-names: + items: + - const: usb0_phy + - const: usb1_phy + - const: usb2_phy + + resets: + items: + - description: USB OTG reset + - description: USB Host 1 Controller reset + - description: USB Host 2 Controller reset + + reset-names: + items: + - const: usb0_reset + - const: usb1_reset + - const: usb2_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + + usb1_vbus-supply: + description: Regulator controlling USB1 Host controller + + usb2_vbus-supply: + description: Regulator controlling USB2 Host controller + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-r40-usb-phy"; + reg = <0x01c13400 0x14>, + <0x01c14800 0x4>, + <0x01c19800 0x4>, + <0x01c1c800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml new file mode 100644 index 000000000..eadfd0c94 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner V3s USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,sun8i-v3s-usb-phy + + reg: + items: + - description: PHY Control registers + - description: PHY PMU0 registers + + reg-names: + items: + - const: phy_ctrl + - const: pmu0 + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb0_phy + + resets: + maxItems: 1 + description: USB OTG reset + + reset-names: + const: usb0_reset + + usb0_id_det-gpios: + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c19400 { + #phy-cells = <1>; + compatible = "allwinner,sun8i-v3s-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu0"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml new file mode 100644 index 000000000..ded7d6f0a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-usb-phy + + reg: + maxItems: 1 + + clocks: + anyOf: + - description: Main PHY Clock + + - items: + - description: Main PHY clock + - description: HSIC 12MHz clock + - description: HSIC 480MHz clock + + clock-names: + oneOf: + - const: phy + + - items: + - const: phy + - const: hsic_12M + - const: hsic_480M + + resets: + anyOf: + - description: Normal USB PHY reset + + - items: + - description: Normal USB PHY reset + - description: HSIC Reset + + reset-names: + oneOf: + - const: phy + + - items: + - const: phy + - const: hsic + + phy_type: + const: hsic + description: + When absent, the PHY type will be assumed to be normal USB. + + phy-supply: + description: + Regulator that powers VBUS + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +if: + properties: + phy_type: + const: hsic + + required: + - phy_type + +then: + properties: + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + maxItems: 2 + +examples: + - | + #include + #include + + usbphy1: phy@a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_clocks CLK_USB0_PHY>; + clock-names = "phy"; + resets = <&usb_clocks RST_USB0_PHY>; + reset-names = "phy"; + phy-supply = <®_usb1_vbus>; + #phy-cells = <0>; + }; + + - | + #include + #include + + usbphy3: phy@a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_clocks CLK_USB2_PHY>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_HSIC>; + clock-names = "phy", + "hsic_12M", + "hsic_480M"; + resets = <&usb_clocks RST_USB2_PHY>, + <&usb_clocks RST_USB2_HSIC>; + reset-names = "phy", + "hsic"; + phy_type = "hsic"; + phy-supply = <®_usb3_vbus>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml new file mode 100644 index 000000000..ff86c8730 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB2 PHY + +maintainers: + - Neil Armstrong + +properties: + compatible: + enum: + - amlogic,g12a-usb2-phy + - amlogic,a1-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +if: + properties: + compatible: + enum: + - amlogic,meson-a1-usb-ctrl + +then: + properties: + power-domains: + maxItems: 1 + required: + - power-domains + +additionalProperties: false + +examples: + - | + phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x36000 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml new file mode 100644 index 000000000..84738644e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic G12A USB3 + PCIE Combo PHY + +maintainers: + - Neil Armstrong + +properties: + compatible: + enum: + - amlogic,g12a-usb3-pcie-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x46000 0x2000>; + clocks = <&ref_clk>; + clock-names = "ref_clk"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml new file mode 100644 index 000000000..18c1ec5e1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic AXG shared MIPI/PCIE analog PHY + +maintainers: + - Remi Pommarel + +properties: + compatible: + const: amlogic,axg-mipi-pcie-analog-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 1 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + mpphy: phy@0 { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + reg = <0x0 0xc>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml new file mode 100644 index 000000000..45f3d72b1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic AXG PCIE PHY + +maintainers: + - Remi Pommarel + +properties: + compatible: + const: amlogic,axg-pcie-phy + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + const: analog + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - phys + - phy-names + - resets + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + #include + pcie_phy: pcie-phy@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0xff644000 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + phys = <&mipi_analog_phy PHY_TYPE_PCIE>; + phy-names = "analog"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml new file mode 100644 index 000000000..03c4809db --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY + +maintainers: + - Martin Blumenstingl + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson8-usb2-phy + - amlogic,meson8b-usb2-phy + - amlogic,meson8m2-usb2-phy + - const: amlogic,meson-mx-usb2-phy + - const: amlogic,meson-gxbb-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: usb_general + - const: usb + + resets: + minItems: 1 + + "#phy-cells": + const: 0 + + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +required: + - compatible + - reg + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + reg = <0xc0000000 0x20>; + resets = <&reset_usb_phy>; + clocks = <&clk_usb_general>, <&reset_usb>; + clock-names = "usb_general", "usb"; + phy-supply = <&usb_vbus>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt new file mode 100644 index 000000000..e1bb12711 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -0,0 +1,76 @@ +* APM X-Gene 15Gbps Multi-purpose PHY nodes + +PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each +PHY (pair of lanes) has its own node. + +Required properties: +- compatible : Shall be "apm,xgene-phy". +- reg : PHY memory resource is the SDS PHY access resource. +- #phy-cells : Shall be 1 as it expects one argument for setting + the mode of the PHY. Possible values are 0 (SATA), + 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI). + +Optional properties: +- status : Shall be "ok" if enabled or "disabled" if disabled. + Default is "ok". +- clocks : Reference to the clock entry. +- apm,tx-eye-tuning : Manual control to fine tune the capture of the serial + bit lines from the automatic calibrated position. + Two set of 3-tuple setting for each (up to 3) + supported link speed on the host. Range from 0 to + 127 in unit of one bit period. Default is 10. +- apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample + data earlier than the nominal sampling point. 1 means + sample data later than the nominal sampling point. + Two set of 3-tuple setting for each (up to 3) + supported link speed on the host. Default is 0. +- apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit) + gain control. Two set of 3-tuple setting for each + (up to 3) supported link speed on the host. Range is + between 0 to 31 in unit of dB. Default is 3. +- apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for + each (up to 3) supported link speed on the host. + Range is between 0 to 199500 in unit of uV. + Default is 199500 uV. +- apm,tx-pre-cursor1 : 1st pre-cursor emphasis taps control. Two set of + 3-tuple setting for each (up to 3) supported link + speed on the host. Range is 0 to 273000 in unit of + uV. Default is 0. +- apm,tx-pre-cursor2 : 2st pre-cursor emphasis taps control. Two set of + 3-tuple setting for each (up to 3) supported link + speed on the host. Range is 0 to 127400 in unit uV. + Default is 0x0. +- apm,tx-post-cursor : Post-cursor emphasis taps control. Two set of + 3-tuple setting for Gen1, Gen2, and Gen3. Range is + between 0 to 0x1f in unit of 18.2mV. Default is 0xf. +- apm,tx-speed : Tx operating speed. One set of 3-tuple for each + supported link speed on the host. + 0 = 1-2Gbps + 1 = 2-4Gbps (1st tuple default) + 2 = 4-8Gbps + 3 = 8-15Gbps (2nd tuple default) + 4 = 2.5-4Gbps + 5 = 4-5Gbps + 6 = 5-6Gbps + 7 = 6-16Gbps (3rd tuple default) + +NOTE: PHY override parameters are board specific setting. + +Example: + phy1: phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f21a000 0x0 0x100>; + #phy-cells = <1>; + }; + + phy2: phy@1f22a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f22a000 0x0 0x100>; + #phy-cells = <1>; + }; + + phy3: phy@1f23a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f23a000 0x0 0x100>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt new file mode 100644 index 000000000..a7aee9ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt @@ -0,0 +1,21 @@ +Driver for Broadcom Northstar USB 2.0 PHY + +Required properties: +- compatible: brcm,ns-usb2-phy +- reg: iomem address range of DMU (Device Management Unit) +- reg-names: "dmu", the only needed & supported reg right now +- clocks: USB PHY reference clock +- clock-names: "phy-ref-clk", the only needed & supported clock right now + +To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it +requires passing phandle to the USB PHY reference clock. + +Example: + usb2-phy { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + #phy-cells = <0>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt new file mode 100644 index 000000000..32f057260 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt @@ -0,0 +1,34 @@ +Driver for Broadcom Northstar USB 3.0 PHY + +Required properties: + +- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". +- reg: address of MDIO bus device +- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin) + registers +- #phy-cells: must be 0 + +Initialization of USB 3.0 PHY depends on Northstar version. There are currently +three known series: Ax, Bx and Cx. +Known A0: BCM4707 rev 0 +Known B0: BCM4707 rev 4, BCM53573 rev 2 +Known B1: BCM4707 rev 6 +Known C0: BCM47094 rev 0 + +Example: + mdio: mdio@0 { + reg = <0x0>; + #size-cells = <1>; + #address-cells = <0>; + + usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt new file mode 100644 index 000000000..c0155f842 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt @@ -0,0 +1,36 @@ +Berlin SATA PHY +--------------- + +Required properties: +- compatible: should be one of + "marvell,berlin2-sata-phy" + "marvell,berlin2q-sata-phy" +- address-cells: should be 1 +- size-cells: should be 0 +- phy-cells: from the generic PHY bindings, must be 1 +- reg: address and length of the register +- clocks: reference to the clock entry + +Sub-nodes: +Each PHY should be represented as a sub-node. + +Sub-nodes required properties: +- reg: the PHY number + +Example: + sata_phy: phy@f7e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xf7e900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt new file mode 100644 index 000000000..be33780f6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt @@ -0,0 +1,16 @@ +* Marvell Berlin USB PHY + +Required properties: +- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy" +- reg: base address and length of the registers +- #phys-cells: should be 0 +- resets: reference to the reset controller + +Example: + + usb-phy@f774000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xf774000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml new file mode 100644 index 000000000..9a2e779e6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: BCM63xx USBH PHY + +maintainers: + - Álvaro Fernández Rojas + +properties: + compatible: + enum: + - brcm,bcm6318-usbh-phy + - brcm,bcm6328-usbh-phy + - brcm,bcm6358-usbh-phy + - brcm,bcm6362-usbh-phy + - brcm,bcm6368-usbh-phy + - brcm,bcm63268-usbh-phy + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: usbh + - const: usb_ref + + resets: + maxItems: 1 + + "#phy-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - "#phy-cells" + +if: + properties: + compatible: + enum: + - brcm,bcm6318-usbh-phy + - brcm,bcm6328-usbh-phy + - brcm,bcm6362-usbh-phy + - brcm,bcm63268-usbh-phy +then: + properties: + power-domains: + maxItems: 1 + required: + - power-domains +else: + properties: + power-domains: false + +examples: + - | + usbh: usb-phy@10001700 { + compatible = "brcm,bcm6368-usbh-phy"; + reg = <0x10001700 0x38>; + clocks = <&periph_clk 15>; + clock-names = "usbh"; + resets = <&periph_rst 12>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 000000000..698aacbdc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,86 @@ +Broadcom STB USB PHY + +Required properties: +- compatible: should be one of + "brcm,brcmstb-usb-phy" + "brcm,bcm7216-usb-phy" + "brcm,bcm7211-usb-phy" + +- reg and reg-names properties requirements are specific to the + compatible string. + "brcm,brcmstb-usb-phy": + - reg: 1 or 2 offset and length pairs. One for the base CTRL registers + and an optional pair for systems with USB 3.x support + - reg-names: not specified + "brcm,bcm7216-usb-phy": + - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL + registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl" + "brcm,bcm7211-usb-phy": + - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, + USB_PHY and USB_MDIO registers and an optional pair + for the BDC registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" + +- #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- interrupts: wakeup interrupt +- interrupt-names: "wakeup" +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. +- brcm,syscon-piarbctl: phandle to syscon for handling config registers +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. + + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; + +usb-phy@29f0200 { + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + compatible = "brcm,bcm7211-usb-phy"; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt new file mode 100644 index 000000000..10efff28b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -0,0 +1,47 @@ +Broadcom Cygnus PCIe PHY + +Required properties: +- compatible: must be "brcm,cygnus-pcie-phy" +- reg: base address and length of the PCIe PHY block +- #address-cells: must be 1 +- #size-cells: must be 0 + +Each PCIe PHY should be represented by a child node + +Required properties For the child node: +- reg: the PHY ID +0 - PCIe RC 0 +1 - PCIe RC 1 +- #phy-cells: must be 0 + +Example: + pcie_phy: phy@301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + + pcie0_phy: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + /* users of the PCIe phy */ + + pcie0: pcie@18012000 { + ... + ... + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + }; + + pcie1: pcie@18013000 { + ... + ... + phys = ; + phy-names = "pcie-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt new file mode 100644 index 000000000..3dc8b3d2f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt new file mode 100644 index 000000000..5b51007c6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt @@ -0,0 +1,27 @@ +* Broadcom NS2 PCIe PHY binding document + +Required bus properties: +- reg: MDIO Bus number for the MDIO interface +- #address-cells: must be 1 +- #size-cells: must be 0 + +Required PHY properties: +- compatible: should be "brcm,ns2-pcie-phy" +- reg: MDIO Phy ID for the MDIO interface +- #phy-cells: must be 0 + +This is a child bus node of "brcm,mdio-mux-iproc" node. + +Example: + +mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy0: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt new file mode 100644 index 000000000..04f063aa7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt @@ -0,0 +1,30 @@ +BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY + +Required properties: + - compatible: brcm,ns2-drd-phy + - reg: offset and length of the NS2 PHY related registers. + - reg-names + The below registers must be provided. + icfg - for DRD ICFG configurations + rst-ctrl - for DRD IDM reset + crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset + usb2-strap - for port over current polarity reversal + - #phy-cells: Must be 0. No args required. + - vbus-gpios: vbus gpio binding + - id-gpios: id gpio binding + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usbdrd_phy: phy@66000960 { + #phy-cells = <0>; + compatible = "brcm,ns2-drd-phy"; + reg = <0x66000960 0x24>, + <0x67012800 0x4>, + <0x6501d148 0x4>, + <0x664d0700 0x4>; + reg-names = "icfg", "rst-ctrl", + "crmu-ctrl", "usb2-strap"; + id-gpios = <&gpio_g 30 0>; + vbus-gpios = <&gpio_g 31 0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt new file mode 100644 index 000000000..e8d82286b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt @@ -0,0 +1,41 @@ +Broadcom Stingray PCIe PHY + +Required properties: +- compatible: must be "brcm,sr-pcie-phy" +- reg: base address and length of the PCIe SS register space +- brcm,sr-cdru: phandle to the CDRU syscon node +- brcm,sr-mhb: phandle to the MHB syscon node +- #phy-cells: Must be 1, denotes the PHY index + +For PAXB based root complex, one can have a configuration of up to 8 PHYs +PHY index goes from 0 to 7 + +For the internal PAXC based root complex, PHY index is always 8 + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; + + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; + + pcie_phy: phy@40000000 { + compatible = "brcm,sr-pcie-phy"; + reg = <0 0x40000000 0 0x800>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; + + /* users of the PCIe PHY */ + + pcie0: pcie@48000000 { + ... + ... + phys = <&pcie_phy 0>; + phy-names = "pcie-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt new file mode 100644 index 000000000..4ba298966 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt @@ -0,0 +1,32 @@ +Broadcom Stingray USB PHY + +Required properties: + - compatible : should be one of the listed compatibles + - "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS. + - "brcm,sr-usb-hs-phy" is a single HS PHY. + - reg: offset and length of the PHY blocks registers + - #phy-cells: + - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate + the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY. + - Must be 0 for brcm,sr-usb-hs-phy. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usbphy0: usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + }; + + usbphy1: usb-phy@10000 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00010000 0x100>, + #phy-cells = <1>; + }; + + usbphy2: usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>, + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt new file mode 100644 index 000000000..c03ad2198 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -0,0 +1,58 @@ +* Broadcom SATA3 PHY + +Required properties: +- compatible: should be one or more of + "brcm,bcm7216-sata-phy" + "brcm,bcm7425-sata-phy" + "brcm,bcm7445-sata-phy" + "brcm,iproc-ns2-sata-phy" + "brcm,iproc-nsp-sata-phy" + "brcm,phy-sata3" + "brcm,iproc-sr-sata-phy" + "brcm,bcm63138-sata-phy" +- address-cells: should be 1 +- size-cells: should be 0 +- reg: register ranges for the PHY PCB interface +- reg-names: should be "phy" and "phy-ctrl" + The "phy-ctrl" registers are only required for + "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy". + +Sub-nodes: + Each port's PHY should be represented as a sub-node. + +Sub-nodes required properties: +- reg: the PHY number +- phy-cells: generic PHY binding; must be 0 + +Sub-nodes optional properties: +- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port + This property is not applicable for "brcm,iproc-ns2-sata-phy", + "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". + +- brcm,rxaeq-mode: string that indicates the desired RX equalizer + mode, possible values are: + "off" (equivalent to not specifying the property) + "auto" + "manual" (brcm,rxaeq-value is used in that case) + +- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. Allowed range is 0..63. + +Example + sata-phy@f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml new file mode 100644 index 000000000..41ee16e21 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank Combination PHYs binding for SATA + +description: | + The Calxeda Combination PHYs connect the SoC to the internal fabric + and to SATA connectors. The PHYs support multiple protocols (SATA, + SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC + controller). + Programming the PHYs is typically handled by those device drivers, + not by a dedicated PHY driver. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-combophy + + '#phy-cells': + const: 1 + + reg: + maxItems: 1 + + phydev: + description: device ID for programming the ComboPHY. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 31 + +required: + - compatible + - reg + - phydev + - '#phy-cells' + +additionalProperties: false + +examples: + - | + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt new file mode 100644 index 000000000..1095bc4e7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml new file mode 100644 index 000000000..3a07285b5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence SALVO PHY + +maintainers: + - Peter Chen + +properties: + compatible: + enum: + - nxp,salvo-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: salvo_phy_clk + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + + usb3phy: usb3-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg 4>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/dm816x-phy.txt b/Documentation/devicetree/bindings/phy/dm816x-phy.txt new file mode 100644 index 000000000..2fe3d11d0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/dm816x-phy.txt @@ -0,0 +1,24 @@ +Device tree binding documentation for am816x USB PHY +========================= + +Required properties: +- compatible : should be "ti,dm816x-usb-phy" +- reg : offset and length of the PHY register set. +- reg-names : name for the phy registers +- clocks : phandle to the clock +- clock-names : name of the clock +- syscon: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1 +- syscon: phandle for the syscon node to access misc registers + +Example: + +usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; +}; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt new file mode 100644 index 000000000..7c70f2ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt @@ -0,0 +1,20 @@ +* Freescale i.MX8MQ USB3 PHY binding + +Required properties: +- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy" +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- reg: The base address and length of the registers +- clocks: phandles to the clocks for each clock listed in clock-names +- clock-names: must contain "phy" + +Optional properties: +- vbus-supply: A phandle to the regulator for USB VBUS. + +Example: + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml new file mode 100644 index 000000000..c2e073e26 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/hisilicon,hi3660-usb3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hisilicon Kirin 960 USB PHY + +maintainers: + - Mauro Carvalho Chehab +description: |+ + Bindings for USB3 PHY on HiSilicon Kirin 960. + +properties: + compatible: + const: hisilicon,hi3660-usb-phy + + "#phy-cells": + const: 0 + + hisilicon,pericrg-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control iso refclk. + + hisilicon,pctrl-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle of syscon used to control usb tcxo. + + hisilicon,eye-diagram-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Eye diagram for phy. + +required: + - compatible + - hisilicon,pericrg-syscon + - hisilicon,pctrl-syscon + - hisilicon,eye-diagram-param + - "#phy-cells" + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt new file mode 100644 index 000000000..296168b74 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt @@ -0,0 +1,22 @@ +Hisilicon hix5hd2 SATA PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hix5hd2-sata-phy" +- reg: offset and length of the PHY registers +- #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Optional Properties: +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. +- hisilicon,power-reg: offset and bit number within peripheral-syscon, + register of controlling sata power supply. + +Example: + sata_phy: phy@f9900000 { + compatible = "hisilicon,hix5hd2-sata-phy"; + reg = <0xf9900000 0x10000>; + #phy-cells = <0>; + hisilicon,peripheral-syscon = <&peripheral_ctrl>; + hisilicon,power-reg = <0x8 10>; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml new file mode 100644 index 000000000..347d0cdfb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel ComboPhy Subsystem + +maintainers: + - Dilip Kota + +description: | + Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA + controllers. A single Combophy provides two PHY instances. + +properties: + $nodename: + pattern: "combophy(@.*|-[0-9a-f])*$" + + compatible: + items: + - const: intel,combophy-lgm + - const: intel,combo-phy + + clocks: + maxItems: 1 + + reg: + items: + - description: ComboPhy core registers + - description: PCIe app core control registers + + reg-names: + items: + - const: core + - const: app + + resets: + maxItems: 4 + + reset-names: + items: + - const: phy + - const: core + - const: iphy0 + - const: iphy1 + + intel,syscfg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Chip configuration registers handle and ComboPhy instance id + + intel,hsio: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: HSIO registers handle and ComboPhy instance id on NOC + + intel,aggregation: + type: boolean + description: | + Specify the flag to configure ComboPHY in dual lane mode. + + intel,phy-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Mode of the two phys in ComboPhy. + See dt-bindings/phy/phy.h for values. + + "#phy-cells": + const: 1 + +required: + - compatible + - clocks + - reg + - reg-names + - intel,syscfg + - intel,hsio + - intel,phy-mode + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + combophy@d0a00000 { + compatible = "intel,combophy-lgm", "intel,combo-phy"; + clocks = <&cgu0 1>; + #phy-cells = <1>; + reg = <0xd0a00000 0x40000>, + <0xd0a40000 0x1000>; + reg-names = "core", "app"; + resets = <&rcu0 0x50 6>, + <&rcu0 0x50 17>, + <&rcu0 0x50 23>, + <&rcu0 0x50 24>; + reset-names = "phy", "core", "iphy0", "iphy1"; + intel,syscfg = <&sysconf 0>; + intel,hsio = <&hsiol 0>; + intel,phy-mode = ; + intel,aggregation; + }; diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml new file mode 100644 index 000000000..edd9d70a6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings + +maintainers: + - Ramuthevar Vadivel Murugan + +description: |+ + Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon + node is used to reference the base address of eMMC phy registers. + + The eMMC PHY node should be the child of a syscon node with the + required property: + + - compatible: Should be one of the following: + "intel,lgm-syscon", "syscon" + - reg: + maxItems: 1 + +properties: + compatible: + oneOf: + - const: intel,lgm-emmc-phy + - const: intel,keembay-emmc-phy + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: emmcclk + +required: + - "#phy-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + sysconf: chiptop@e0200000 { + compatible = "intel,lgm-syscon", "syscon"; + reg = <0xe0200000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + emmc_phy: emmc-phy@a8 { + compatible = "intel,lgm-emmc-phy"; + reg = <0x00a8 0x10>; + clocks = <&emmc>; + #phy-cells = <0>; + }; + }; + + - | + phy@20290000 { + compatible = "intel,keembay-emmc-phy"; + reg = <0x20290000 0x54>; + clocks = <&emmc>; + clock-names = "emmcclk"; + #phy-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml new file mode 100644 index 000000000..ce62c0b94 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel LGM USB PHY Device Tree Bindings + +maintainers: + - Vadivel Murugan Ramuthevar + +properties: + compatible: + const: intel,lgm-usb-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + items: + - description: USB PHY and Host controller reset + - description: APB BUS reset + - description: General Hardware reset + + reset-names: + items: + - const: phy + - const: apb + - const: phy31 + + "#phy-cells": + const: 0 + +required: + - compatible + - clocks + - reg + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + usb-phy@e7e00000 { + compatible = "intel,lgm-usb-phy"; + reg = <0xe7e00000 0x10000>; + clocks = <&cgu0 153>; + resets = <&rcu 0x70 0x24>, + <&rcu 0x70 0x26>, + <&rcu 0x70 0x28>; + reset-names = "phy", "apb", "phy31"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt new file mode 100644 index 000000000..300830dda --- /dev/null +++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt @@ -0,0 +1,19 @@ +TI Keystone USB PHY + +Required properties: + - compatible: should be "ti,keystone-usbphy". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the usb phy control register set. + +The main purpose of this PHY driver is to enable the USB PHY reference clock +gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just +an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 +phy node in the USB Glue layer driver node. + +usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; +}; diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml new file mode 100644 index 000000000..a97482179 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings + +maintainers: + - Martin Blumenstingl + +properties: + "#phy-cells": + const: 1 + description: selects the PHY mode as defined in + + compatible: + enum: + - lantiq,vrx200-pcie-phy + - lantiq,arx300-pcie-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: PHY module clock + - description: PDI register clock + + clock-names: + items: + - const: phy + - const: pdi + + resets: + items: + - description: exclusive PHY reset line + - description: shared reset line between the PCIe PHY and PCIe controller + + reset-names: + items: + - const: phy + - const: pcie + + lantiq,rcu: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the RCU syscon + + lantiq,rcu-endian-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the offset of the endian registers for this PHY instance in the RCU syscon + + lantiq,rcu-big-endian-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the mask to set the PDI (PHY) registers for this PHY instance to big endian + + big-endian: + description: Configures the PDI (PHY) registers in big-endian mode + type: boolean + + little-endian: + description: Configures the PDI (PHY) registers in big-endian mode + type: boolean + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - lantiq,rcu + - lantiq,rcu-endian-offset + - lantiq,rcu-big-endian-mask + +additionalProperties: false + +examples: + - | + pcie0_phy: phy@106800 { + compatible = "lantiq,vrx200-pcie-phy"; + reg = <0x106800 0x100>; + lantiq,rcu = <&rcu0>; + lantiq,rcu-endian-offset = <0x4c>; + lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */ + big-endian; + clocks = <&pmu 32>, <&pmu 36>; + clock-names = "phy", "pdi"; + resets = <&reset0 12 24>, <&reset0 22 22>; + reset-names = "phy", "pcie"; + #phy-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml new file mode 100644 index 000000000..00609ace6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright 2019 Lubomir Rintel +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Marvell MMP3 HSIC PHY + +maintainers: + - Lubomir Rintel + +properties: + compatible: + const: marvell,mmp3-hsic-phy + + reg: + maxItems: 1 + description: base address of the device + + reset-gpios: + maxItems: 1 + description: GPIO connected to reset + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - reset-gpios + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + hsic-phy@f0001800 { + compatible = "marvell,mmp3-hsic-phy"; + reg = <0xf0001800 0x40>; + reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml new file mode 100644 index 000000000..c97043eaa --- /dev/null +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +# Copyright 2019,2020 Lubomir Rintel +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MMP3 USB PHY bindings + +maintainers: + - Lubomir Rintel + +properties: + $nodename: + pattern: '^usb-phy@[a-f0-9]+$' + + compatible: + const: marvell,mmp3-usb-phy + + reg: + maxItems: 1 + description: base address of the device + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + usb-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt new file mode 100644 index 000000000..b84a02ebf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt @@ -0,0 +1,21 @@ +* Amlogic Meson GXL and GXM USB2 PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-gxl-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) + +Optional properties: +- clocks: a phandle to the clock of this PHY +- clock-names: must be "phy" +- resets: a phandle to the reset line of this PHY +- reset-names: must be "phy" +- phy-supply: see phy-bindings.txt in this directory + + +Example: + usb2_phy0: phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78000 0x0 0x20>; + }; diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000..9b2340723 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "fsl,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30a00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt new file mode 100644 index 000000000..c9f5c0caf --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -0,0 +1,32 @@ +* Freescale MXS USB Phy Device + +Required properties: +- compatible: should contain: + * "fsl,imx23-usbphy" for imx23 and imx28 + * "fsl,imx6q-usbphy" for imx6dq and imx6dl + * "fsl,imx6sl-usbphy" for imx6sl + * "fsl,vf610-usbphy" for Vybrid vf610 + * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp + "fsl,imx23-usbphy" is still a fallback for other strings +- reg: Should contain registers location and length +- interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series + +Optional properties: +- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DN output signal. Default: 45 +- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DP output signal. Default: 45 +- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of + the 17.78mA TX reference current. Default: 100 + +Example: +usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; +}; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt new file mode 100644 index 000000000..38c5fa21f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -0,0 +1,778 @@ +Device tree binding for NVIDIA Tegra XUSB pad controller +======================================================== + +The Tegra XUSB pad controller manages a set of I/O lanes (with differential +signals) which connect directly to pins/pads on the SoC package. Each lane +is controlled by a HW block referred to as a "pad" in the Tegra hardware +documentation. Each such "pad" may control either one or multiple lanes, +and thus contains any logic common to all its lanes. Each lane can be +separately configured and powered up. + +Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or +super-speed USB. Other lanes are for various types of low-speed, full-speed +or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller +contains a software-configurable mux that sits between the I/O controller +ports (e.g. PCIe) and the lanes. + +In addition to per-lane configuration, USB 3.0 ports may require additional +settings on a per-board basis. + +Pads will be represented as children of the top-level XUSB pad controller +device tree node. Each lane exposed by the pad will be represented by its +own subnode and can be referenced by users of the lane using the standard +PHY bindings, as described by the phy-bindings.txt file in this directory. + +The Tegra hardware documentation refers to the connection between the XUSB +pad controller and the XUSB controller as "ports". This is confusing since +"port" is typically used to denote the physical USB receptacle. The device +tree binding in this document uses the term "port" to refer to the logical +abstraction of the signals that are routed to a USB receptacle (i.e. a PHY +for the USB signal, the VBUS power supply, the USB 2.0 companion port for +USB 3.0 receptacles, ...). + +Required properties: +-------------------- +- compatible: Must be: + - Tegra124: "nvidia,tegra124-xusb-padctl" + - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" + - Tegra210: "nvidia,tegra210-xusb-padctl" + - Tegra186: "nvidia,tegra186-xusb-padctl" + - Tegra194: "nvidia,tegra194-xusb-padctl" +- reg: Physical base address and length of the controller's registers. +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must include the following entries: + - "padctl" + +For Tegra124: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. + +For Tegra210: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + +For Tegra186: +- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. +- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. + +For Tegra194: +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. + +Pad nodes: +========== + +A required child node named "pads" contains a list of subnodes, one for each +of the pads exposed by the XUSB pad controller. Each pad may need additional +resources that can be referenced in its pad node. + +The "status" property is used to enable or disable the use of a pad. If set +to "disabled", the pad will not be used on the given board. In order to use +the pad and any of its lanes, this property must be set to "okay". + +For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie +and sata. No extra resources are required for operation of these pads. + +For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is +a description of the properties of each pad. + +UTMI pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "trk": phandle and specifier referring to the USB2 tracking clock + +HSIC pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "trk": phandle and specifier referring to the HSIC tracking clock + +PCIe pad: +--------- + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "pll": phandle and specifier referring to the PLLE +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must contain the following entries: + - "phy": reset for the PCIe UPHY block + +SATA pad: +--------- + +Required properties: +- resets: Must contain an entry for each entry in reset-names. +- reset-names: Must contain the following entries: + - "phy": reset for the SATA UPHY block + + +PHY nodes: +========== + +Each pad node has a child named "lanes" that contains one or more children of +its own, each representing one of the lanes controlled by the pad. + +Required properties: +-------------------- +- status: Defines the operation status of the PHY. Valid values are: + - "disabled": the PHY is disabled + - "okay": the PHY is enabled +- #phy-cells: Should be 0. Since each lane represents a single PHY, there is + no need for an additional specifier. +- nvidia,function: The output function of the PHY. See below for a list of + valid functions per SoC generation. + +For Tegra124 and Tegra132, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2 + - functions: "snps", "xusb", "uart" +- ulpi: ulpi-0 + - functions: "snps", "xusb" +- hsic: hsic-0, hsic-1 + - functions: "snps", "xusb" +- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4 + - functions: "pcie", "usb3-ss" +- sata: sata-0 + - functions: "usb3-ss", "sata" + +For Tegra210, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2, usb2-3 + - functions: "snps", "xusb", "uart" +- hsic: hsic-0, hsic-1 + - functions: "snps", "xusb" +- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6 + - functions: "pcie-x1", "usb3-ss", "pcie-x4" +- sata: sata-0 + - functions: "usb3-ss", "sata" + +For Tegra194, the list of valid PHY nodes is given below: +- usb2: usb2-0, usb2-1, usb2-2, usb2-3 + - functions: "xusb" +- usb3: usb3-0, usb3-1, usb3-2, usb3-3 + - functions: "xusb" + +Port nodes: +=========== + +A required child node named "ports" contains a list of all the ports exposed +by the XUSB pad controller. Per-port configuration is only required for USB. + +USB2 ports: +----------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- mode: A string that determines the mode in which to run the port. Valid + values are: + - "host": for USB host mode + - "device": for USB device mode + - "otg": for USB OTG mode + +Required properties for OTG/Peripheral capable USB2 ports: +- usb-role-switch: Boolean property to indicate that the port support OTG or + peripheral mode. If present, the port supports switching between USB host + and peripheral roles. Connector should be added as subnode. + See usb/usb-conn-gpio.txt. + +Optional properties: +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +ULPI ports: +----------- + +Optional properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +HSIC ports: +----------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled + +Optional properties: +- vbus-supply: phandle to a regulator supplying the VBUS voltage. + +Super-speed USB ports: +---------------------- + +Required properties: +- status: Defines the operation status of the port. Valid values are: + - "disabled": the port is disabled + - "okay": the port is enabled +- nvidia,usb2-companion: A single cell that specifies the physical port number + to map this super-speed USB port to. The range of valid port numbers varies + with the SoC generation: + - 0-2: for Tegra124 and Tegra132 + - 0-3: for Tegra210 + +Optional properties: +- nvidia,internal: A boolean property whose presence determines that a port + is internal. In the absence of this property the port is considered to be + external. + +- maximum-speed: Only for Tegra194. A string property that specifies maximum + supported speed of a usb3 port. Valid values are: + - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. + - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. + +For Tegra124 and Tegra132, the XUSB pad controller exposes the following +ports: +- 3x USB2: usb2-0, usb2-1, usb2-2 +- 1x ULPI: ulpi-0 +- 2x HSIC: hsic-0, hsic-1 +- 2x super-speed USB: usb3-0, usb3-1 + +For Tegra210, the XUSB pad controller exposes the following ports: +- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 +- 2x HSIC: hsic-0, hsic-1 +- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 + +For Tegra194, the XUSB pad controller exposes the following ports: +- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 +- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 + +Examples: +========= + +Tegra124 and Tegra132: +---------------------- + +SoC include: + + padctl@7009f000 { + /* for Tegra124 */ + compatible = "nvidia,tegra124-xusb-padctl"; + /* for Tegra132 */ + compatible = "nvidia,tegra132-xusb-padctl", + "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + pads { + usb2 { + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { + status = "disabled"; + + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + sata { + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + ulpi-0 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + }; + }; + +Board file: + + padctl@7009f000 { + status = "okay"; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* Micro A/B */ + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + /* Mini PCIe */ + usb2-1 { + status = "okay"; + mode = "host"; + }; + + /* USB3 */ + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb3_vbus>; + }; + + usb3-0 { + nvidia,port = <2>; + status = "okay"; + }; + }; + }; + +Tegra210: +--------- + +SoC include: + + padctl@7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + status = "disabled"; + + pads { + usb2 { + clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 205>; + reset-names = "phy"; + status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-5 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-6 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + sata { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 204>; + reset-names = "phy"; + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + status = "disabled"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; + +Board file: + + padctl@7009f000 { + status = "okay"; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-3 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + status = "okay"; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + }; + + usb2-1 { + status = "okay"; + vbus-supply = <&vdd_5v0_rtl>; + mode = "host"; + }; + + usb2-2 { + status = "okay"; + vbus-supply = <&vdd_usb_vbus>; + mode = "host"; + }; + + usb2-3 { + status = "okay"; + mode = "host"; + }; + + usb3-0 { + status = "okay"; + nvidia,lanes = "pcie-6"; + nvidia,port = <1>; + }; + + usb3-1 { + status = "okay"; + nvidia,lanes = "pcie-5"; + nvidia,port = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt new file mode 100644 index 000000000..1aa6f2674 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt @@ -0,0 +1,74 @@ +Tegra SOC USB PHY + +The device node for Tegra SOC USB PHY: + +Required properties : + - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy". + For Tegra30, must contain "nvidia,tegra30-usb-phy". Otherwise, must contain + "nvidia,-usb-phy" plus at least one of the above, where is + tegra114, tegra124, tegra132, or tegra210. + - reg : Defines the following set of registers, in the order listed: + - The PHY's own register set. + Always present. + - The register set of the PHY containing the UTMI pad control registers. + Present if-and-only-if phy_type == utmi. + - phy_type : Should be one of "utmi", "ulpi" or "hsic". + - clocks : Defines the clocks listed in the clock-names property. + - clock-names : The following clock names must be present: + - reg: The clock needed to access the PHY's own registers. This is the + associated EHCI controller's clock. Always present. + - pll_u: PLL_U. Always present. + - timer: The timeout clock (clk_m). Present if phy_type == utmi. + - utmi-pads: The clock needed to access the UTMI pad control registers. + Present if phy_type == utmi. + - ulpi-link: The clock Tegra provides to the ULPI PHY (usually pad DAP_MCLK2 + with pad group aka "nvidia,pins" cdev2 and pin mux option config aka + "nvidia,function" pllp_out4). + Present if phy_type == ulpi, and ULPI link mode is in use. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb: The PHY's own reset signal. + - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control + registers. Required even if phy_type == ulpi. + +Required properties for phy_type == ulpi: + - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. + +Required PHY timing params for utmi phy, for all chips: + - nvidia,hssync-start-delay : Number of 480 Mhz clock cycles to wait before + start of sync launches RxActive + - nvidia,elastic-limit : Variable FIFO Depth of elastic input store + - nvidia,idle-wait-delay : Number of 480 Mhz clock cycles of idle to wait + before declare IDLE. + - nvidia,term-range-adj : Range adjusment on terminations + - Either one of the following for HS driver output control: + - nvidia,xcvr-setup : integer, uses the provided value. + - nvidia,xcvr-setup-use-fuses : boolean, indicates that the value is read + from the on-chip fuses + If both are provided, nvidia,xcvr-setup-use-fuses takes precedence. + - nvidia,xcvr-lsfslew : LS falling slew rate control. + - nvidia,xcvr-lsrslew : LS rising slew rate control. + +Required PHY timing params for utmi phy, only on Tegra30 and above: + - nvidia,xcvr-hsslew : HS slew rate control. + - nvidia,hssquelch-level : HS squelch detector level. + - nvidia,hsdiscon-level : HS disconnect detector level. + +Optional properties: + - nvidia,has-legacy-mode : boolean indicates whether this controller can + operate in legacy mode (as APX 2500 / 2600). In legacy mode some + registers are accessed through the APB_MISC base address instead of + the USB controller. + - nvidia,is-wired : boolean. Indicates whether we can do certain kind of power + optimizations for the devices that are always connected. e.g. modem. + - dr_mode : dual role mode. Indicates the working mode for the PHY. Can be + "host", "peripheral", or "otg". Defaults to "host" if not defined. + host means this is a host controller + peripheral means it is device controller + otg means it can operate as either ("on the go") + - nvidia,has-utmi-pad-registers : boolean indicates whether this controller + contains the UTMI pad control registers common to all USB controllers. + +VBUS control (required for dr_mode == otg, optional for dr_mode == host): + - vbus-supply: regulator for VBUS diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt new file mode 100644 index 000000000..8b5a7a28a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt @@ -0,0 +1,48 @@ +mvebu armada 38x comphy driver +------------------------------ + +This comphy controller can be found on Marvell Armada 38x. It provides a +number of shared PHYs used by various interfaces (network, sata, usb, +PCIe...). + +Required properties: + +- compatible: should be "marvell,armada-380-comphy" +- reg: should contain the comphy register location and length. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional properties: + +- reg-names: must be "comphy" as the first name, and "conf". +- reg: must contain the comphy register location and length as the first + pair, followed by an optional configuration register address and + length pair. + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: comphy lane number. +- #phy-cells : from the generic phy bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Example: + + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg-names = "comphy", "conf"; + reg = <0x18300 0x100>, <0x18460 4>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt new file mode 100644 index 000000000..c3a29c5fe --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt @@ -0,0 +1,18 @@ +* Atheros AR71XX/9XXX USB PHY + +Required properties: +- compatible: "qca,ar7100-usb-phy" +- #phys-cells: should be 0 +- reset-names: "phy"[, "suspend-override"] +- resets: references to the reset controllers + +Example: + + usb-phy { + compatible = "qca,ar7100-usb-phy"; + + reset-names = "phy", "suspend-override"; + resets = <&rst 4>, <&rst 3>; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt new file mode 100644 index 000000000..c4eb38902 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt @@ -0,0 +1,72 @@ +This document explains only the device tree data binding. For general +information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst + +PHY device node +=============== + +Required Properties: +#phy-cells: Number of cells in a PHY specifier; The meaning of all those + cells is defined by the binding for the phy node. The PHY + provider can use the values in cells to find the appropriate + PHY. + +Optional Properties: +phy-supply: Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + +For example: + +phys: phy { + compatible = "xxx"; + reg = <...>; + . + . + #phy-cells = <1>; + . + . +}; + +That node describes an IP block (PHY provider) that implements 2 different PHYs. +In order to differentiate between these 2 PHYs, an additional specifier should be +given while trying to get a reference to it. + +PHY user node +============= + +Required Properties: +phys : the phandle for the PHY device (used by the PHY subsystem; not to be + confused with the Ethernet specific 'phy' and 'phy-handle' properties, + see Documentation/devicetree/bindings/net/ethernet.txt for these) +phy-names : the names of the PHY corresponding to the PHYs present in the + *phys* phandle + +Example 1: +usb1: usb_otg_ss@xxx { + compatible = "xxx"; + reg = ; + . + . + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2phy", "usb3phy"; + . + . +}; + +This node represents a controller that uses two PHYs, one for usb2 and one for +usb3. + +Example 2: +usb2: usb_otg_ss@xxx { + compatible = "xxx"; + reg = ; + . + . + phys = <&phys 1>; + phy-names = "usbphy"; + . + . +}; + +This node represents a controller that uses one of the PHYs of the PHY provider +device defined previously. Note that the phy handle has an additional specifier +"1" to differentiate between the two PHYs. diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt new file mode 100644 index 000000000..03f5939d3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt @@ -0,0 +1,70 @@ +Cadence Sierra PHY +----------------------- + +Required properties: +- compatible: Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform + Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC. +- resets: Must contain an entry for each in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include "sierra_reset" and "sierra_apb". + "sierra_reset" must control the reset line to the PHY. + "sierra_apb" must control the reset line to the APB PHY + interface ("sierra_apb" is optional). +- reg: register range for the PHY. +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Optional properties: +- clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must contain "cmn_refclk_dig_div" and + "cmn_refclk1_dig_div" for configuring the frequency of + the clock to the lanes. "phy_clk" is deprecated. +- cdns,autoconf: A boolean property whose presence indicates that the + PHY registers will be configured by hardware. If not + present, all sub-node optional properties must be + provided. + +Sub-nodes: + Each group of PHY lanes with a single master lane should be represented as + a sub-node. Note that the actual configuration of each lane is determined by + hardware strapping, and must match the configuration specified here. + +Sub-node required properties: +- #phy-cells: Generic PHY binding; must be 0. +- reg: The master lane number. This is the lowest numbered lane + in the lane group. +- resets: Must contain one entry which controls the reset line for the + master lane of the sub-node. + See ../reset/reset.txt for details. + +Sub-node optional properties: +- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The + group is made up of consecutive lanes. +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on + configuration of lanes. + +Example: + pcie_phy4: pcie-phy@fd240000 { + compatible = "cdns,sierra-phy-t0"; + reg = <0x0 0xfd240000 0x0 0x40000>; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "sierra_reset", "sierra_apb"; + clocks = <&phyclock>; + clock-names = "phy_clk"; + #address-cells = <1>; + #size-cells = <0>; + pcie0_phy0: pcie-phy@0 { + reg = <0>; + resets = <&phyrst 2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + }; + pcie0_phy1: pcie-phy@2 { + reg = <2>; + resets = <&phyrst 4>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml new file mode 100644 index 000000000..e266ade53 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence Torrent SD0801 PHY binding + +description: + This binding describes the Cadence SD0801 PHY (also known as Torrent PHY) + hardware included with the Cadence MHDP DisplayPort controller. Torrent + PHY also supports multilink multiprotocol combinations including protocols + such as PCIe, USB, SGMII, QSGMII etc. + +maintainers: + - Swapnil Jakhade + - Yuti Amonkar + +properties: + compatible: + enum: + - cdns,torrent-phy + - ti,j721e-serdes-10g + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clocks: + maxItems: 1 + description: + PHY reference clock. Must contain an entry in clock-names. + + clock-names: + const: refclk + + reg: + minItems: 1 + maxItems: 2 + items: + - description: Offset of the Torrent PHY configuration registers. + - description: Offset of the DPTX PHY configuration registers. + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_phy + - const: dptx_phy + + resets: + minItems: 1 + maxItems: 2 + items: + - description: Torrent PHY reset. + - description: Torrent APB reset. This is optional. + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: torrent_reset + - const: torrent_apb + +patternProperties: + '^phy@[0-3]$': + type: object + description: + Each group of PHY lanes with a single master lane should be represented as a sub-node. + properties: + reg: + description: + The master lane number. This is the lowest numbered lane in the lane group. + minimum: 0 + maximum: 3 + + resets: + minItems: 1 + maxItems: 4 + description: + Contains list of resets, one per lane, to get all the link lanes out of reset. + + "#phy-cells": + const: 0 + + cdns,phy-type: + description: + Specifies the type of PHY for which the group of PHY lanes is used. + Refer include/dt-bindings/phy/phy.h. Constants from the header should be used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 9 + + cdns,num-lanes: + description: + Number of lanes. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4] + default: 4 + + cdns,ssc-mode: + description: + Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, + EXTERNAL_SSC or INTERNAL_SSC. + Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + + cdns,max-bit-rate: + description: + Maximum DisplayPort link bit rate to use, in Mbps + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100] + default: 8100 + + required: + - reg + - resets + - "#phy-cells" + - cdns,phy-type + - cdns,num-lanes + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>, + <0xf0 0xfb030a00 0x0 0x00000040>; + reg-names = "torrent_phy", "dptx_phy"; + resets = <&phyrst 0>; + reset-names = "torrent_reset"; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 1>, <&phyrst 2>, + <&phyrst 3>, <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = ; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <8100>; + }; + }; + }; + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + torrent-phy@f0fb500000 { + compatible = "cdns,torrent-phy"; + reg = <0xf0 0xfb500000 0x0 0x00100000>; + reg-names = "torrent_phy"; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "torrent_reset", "torrent_apb"; + clocks = <&ref_clk>; + clock-names = "refclk"; + #address-cells = <1>; + #size-cells = <0>; + phy@0 { + reg = <0>; + resets = <&phyrst 2>, <&phyrst 3>; + #phy-cells = <0>; + cdns,phy-type = ; + cdns,num-lanes = <2>; + cdns,ssc-mode = ; + }; + + phy@2 { + reg = <2>; + resets = <&phyrst 4>; + #phy-cells = <0>; + cdns,phy-type = ; + cdns,num-lanes = <1>; + cdns,ssc-mode = ; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt new file mode 100644 index 000000000..2eb9b2b69 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt @@ -0,0 +1,40 @@ +Motorola CPCAP PMIC USB PHY binding + +Required properties: +compatible: Shall be either "motorola,cpcap-usb-phy" or + "motorola,mapphone-cpcap-usb-phy" +#phy-cells: Shall be 0 +interrupts: CPCAP PMIC interrupts used by the USB PHY +interrupt-names: Interrupt names +io-channels: IIO ADC channels used by the USB PHY +io-channel-names: IIO ADC channel names +vusb-supply: Regulator for the PHY + +Optional properties: +pinctrl: Optional alternate pin modes for the PHY +pinctrl-names: Names for optional pin modes +mode-gpios: Optional GPIOs for configuring alternate modes + +Example: +cpcap_usb2_phy: phy { + compatible = "motorola,mapphone-cpcap-usb-phy"; + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-1 = <&usb_ulpi_pins>; + pinctrl-2 = <&usb_utmi_pins>; + pinctrl-3 = <&uart3_pins>; + pinctrl-names = "default", "ulpi", "utmi", "uart"; + #phy-cells = <0>; + interrupts-extended = < + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 + &cpcap 48 1 + >; + interrupt-names = + "id_ground", "id_float", "se0conn", "vbusvld", + "sessvld", "sessend", "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH + &gpio1 0 GPIO_ACTIVE_HIGH>; + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; + io-channel-names = "vbus", "id"; + vusb-supply = <&vusb>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt new file mode 100644 index 000000000..c26478be3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt @@ -0,0 +1,40 @@ +TI DA8xx/OMAP-L1xx/AM18xx USB PHY + +Required properties: + - compatible: must be "ti,da830-usb-phy". + - #phy-cells: must be 1. + +This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG +controllers on DA8xx SoCs. Consumers of this device should use index 0 for +the USB 2.0 phy device and index 1 for the USB 1.1 phy device. + +It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon" +to access the CFGCHIP2 register. + +Example: + + cfgchip: cfgchip@1417c { + compatible = "ti,da830-cfgchip", "syscon"; + reg = <0x1417c 0x14>; + }; + + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + }; + + usb20: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x1000>; + interrupts = <58>; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + }; + + usb11: usb@225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt new file mode 100644 index 000000000..17b0c7613 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt @@ -0,0 +1,59 @@ +HiSilicon STB PCIE/SATA/USB3 PHY + +Required properties: +- compatible: Should be "hisilicon,hi3798cv200-combphy" +- reg: Should be the address space for COMBPHY configuration and state + registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and + PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC. +- #phy-cells: Should be 1. The cell number is used to select the phy mode + as defined in . +- clocks: The phandle to clock provider and clock specifier pair. +- resets: The phandle to reset controller and reset specifier pair. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties. + +Optional properties: +- hisilicon,fixed-mode: If the phy device doesn't support mode select + but a fixed mode setting, the property should be present to specify + the particular mode. +- hisilicon,mode-select-bits: If the phy device support mode select, + this property should be present to specify the register bits in + peripheral controller, as a 3 integers tuple: + . + +Notes: +- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only + one of them should be present. +- The device node should be a child of peripheral controller that contains + COMBPHY configuration/state and PERI_CTRL register used to select PHY mode. + Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller + bindings. + +Examples: + +perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + combphy0: phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY0_CLK>; + resets = <&crg 0x188 4>; + hisilicon,fixed-mode = ; + }; + + combphy1: phy@858 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x858 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY1_CLK>; + resets = <&crg 0x188 12>; + hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt new file mode 100644 index 000000000..f17a56e21 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt @@ -0,0 +1,16 @@ +Hisilicon hi6220 usb PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hi6220-usb-phy" +- #phy-cells: must be 0 +- hisilicon,peripheral-syscon: phandle of syscon used to control phy. +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + usb_phy: usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <&fixed_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt new file mode 100644 index 000000000..0d70c8341 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt @@ -0,0 +1,71 @@ +Device tree bindings for HiSilicon INNO USB2 PHY + +Required properties: +- compatible: Should be one of the following strings: + "hisilicon,inno-usb2-phy", + "hisilicon,hi3798cv200-usb2-phy". +- reg: Should be the address space for PHY configuration register in peripheral + controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC. +- clocks: The phandle and clock specifier pair for INNO USB2 PHY device + reference clock. +- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset + signal. +- #address-cells: Must be 1. +- #size-cells: Must be 0. + +The INNO USB2 PHY device should be a child node of peripheral controller that +contains the PHY configuration register, and each device suppports up to 2 PHY +ports which are represented as child nodes of INNO USB2 PHY device. + +Required properties for PHY port node: +- reg: The PHY port instance number. +- #phy-cells: Defined by generic PHY bindings. Must be 0. +- resets: The phandle and reset specifier pair for PHY port reset signal. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + +perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + usb2_phy1: usb2-phy@120 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x120 0x4>; + clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; + resets = <&crg 0xbc 4>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy1_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 8>; + }; + + usb2_phy1_port1: phy@1 { + reg = <1>; + #phy-cells = <0>; + resets = <&crg 0xbc 9>; + }; + }; + + usb2_phy2: usb2-phy@124 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x124 0x4>; + clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; + resets = <&crg 0xbc 6>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy2_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 10>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt new file mode 100644 index 000000000..643948b6b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt @@ -0,0 +1,40 @@ +Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding +=========================================== + +This binding describes the USB PHY hardware provided by the RCU module on the +Lantiq XWAY SoCs. + +This node has to be a sub node of the Lantiq RCU block. + +------------------------------------------------------------------------------- +Required properties (controller (parent) node): +- compatible : Should be one of + "lantiq,ase-usb2-phy" + "lantiq,danube-usb2-phy" + "lantiq,xrx100-usb2-phy" + "lantiq,xrx200-usb2-phy" + "lantiq,xrx300-usb2-phy" +- reg : Defines the following sets of registers in the parent + syscon device + - Offset of the USB PHY configuration register + - Offset of the USB Analog configuration + register (only for xrx200 and xrx200) +- clocks : References to the (PMU) "phy" clk gate. +- clock-names : Must be "phy" +- resets : References to the RCU USB configuration reset bits. +- reset-names : Must be one of the following: + "phy" (optional) + "ctrl" (shared) + +------------------------------------------------------------------------------- +Example for the USB PHYs on an xRX200 SoC: + usb_phy0: usb2-phy@18 { + compatible = "lantiq,xrx200-usb2-phy"; + reg = <0x18 4>, <0x38 4>; + + clocks = <&pmu PMU_GATE_USB0_PHY>; + clock-names = "phy"; + resets = <&reset1 4 4>, <&reset0 4 4>; + reset-names = "phy", "ctrl"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt new file mode 100644 index 000000000..3bb821cd6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt @@ -0,0 +1,26 @@ +NXP LPC18xx/43xx internal USB OTG PHY binding +--------------------------------------------- + +This file contains documentation for the internal USB OTG PHY found +in NXP LPC18xx and LPC43xx SoCs. + +Required properties: +- compatible : must be "nxp,lpc1850-usb-otg-phy" +- clocks : must be exactly one entry +See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- #phy-cells : must be 0 for this phy +See: Documentation/devicetree/bindings/phy/phy-bindings.txt + +The phy node must be a child of the creg syscon node. + +Example: +creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + + usb0_otg_phy: phy { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt new file mode 100644 index 000000000..29427d4f0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt @@ -0,0 +1,29 @@ +Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY + +Required properties: +- compatible Must be "motorola,mapphone-mdm6600" +- enable-gpios GPIO to enable the USB PHY +- power-gpios GPIO to power on the device +- reset-gpios GPIO to reset the device +- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for + normal mode versus USB flashing mode +- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600 +- motorola,status-gpios Three GPIOs to read the power state of the MDM6600 + +Example: + +usb-phy { + compatible = "motorola,mapphone-mdm6600"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt new file mode 100644 index 000000000..89caa885d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt @@ -0,0 +1,117 @@ +STMicroelectronics STi MIPHY28LP PHY binding +============================================ + +This binding describes a miphy device that is used to control PHY hardware +for SATA, PCIe or USB3. + +Required properties (controller (parent) node): +- compatible : Should be "st,miphy28lp-phy". +- st,syscfg : Should be a phandle of the system configuration register group + which contain the SATA, PCIe or USB3 mode setting bits. + +Required nodes : A sub-node is required for each channel the controller + provides. Address range information including the usual + 'reg' and 'reg-names' properties are used inside these + nodes to describe the controller's topology. These nodes + are translated by the driver's .xlate() function. + +Required properties (port (child) node): +- #phy-cells : Should be 1 (See second example) + Cell after port phandle is device type from: + - PHY_TYPE_SATA + - PHY_TYPE_PCI + - PHY_TYPE_USB3 +- reg : Address and length of the register set for the device. +- reg-names : The names of the register addresses corresponding to the registers + filled in "reg". It can also contain the offset of the system configuration + registers used as glue-logic to setup the device for SATA/PCIe or USB3 + devices. +- st,syscfg : Offset of the parent configuration register. +- resets : phandle to the parent reset controller. +- reset-names : Associated name must be "miphy-sw-rst". + +Optional properties (port (child) node): +- st,osc-rdy : to check the MIPHY0_OSC_RDY status in the glue-logic. This + is not available in all the MiPHY. For example, for STiH407, only the + MiPHY0 has this bit. +- st,osc-force-ext : to select the external oscillator. This can change from + different MiPHY inside the same SoC. +- st,sata_gen : to select which SATA_SPDMODE has to be set in the SATA system config + register. +- st,px_rx_pol_inv : to invert polarity of RXn/RXp (respectively negative line and positive + line). +- st,scc-on : enable ssc to reduce effects of EMI (only for sata or PCIe). +- st,tx-impedance-comp : to compensate tx impedance avoiding out of range values. + +example: + + miphy28lp_phy: miphy28lp@9b22000 { + compatible = "st,miphy28lp-phy"; + st,syscfg = <&syscfg_core>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@9b22000 { + reg = <0x9b22000 0xff>, + <0x9b09000 0xff>, + <0x9b04000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x114 0x818 0xe0 0xec>; + #phy-cells = <1>; + st,osc-rdy; + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY0_SOFTRESET>; + }; + + phy_port1: port@9b2a000 { + reg = <0x9b2a000 0xff>, + <0x9b19000 0xff>, + <0x9b14000 0xff>; + reg-names = "sata-up", + "pcie-up", + "pipew"; + + st,syscfg = <0x118 0x81c 0xe4 0xf0>; + + #phy-cells = <1>; + st,osc-force-ext; + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY1_SOFTRESET>; + }; + + phy_port2: port@8f95000 { + reg = <0x8f95000 0xff>, + <0x8f90000 0xff>; + reg-names = "pipew", + "usb3-up"; + + st,syscfg = <0x11c 0x820>; + + #phy-cells = <1>; + reset-names = "miphy-sw-rst"; + resets = <&softreset STIH407_MIPHY2_SOFTRESET>; + }; + }; + + +Specifying phy control of devices +================================= + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the miphy device node and an index +specifying which configuration to use, as described in phy-bindings.txt. + +example: + sata0: sata@9b20000 { + ... + phys = <&phy_port0 PHY_TYPE_SATA>; + ... + }; + +Macro definitions for the supported miphy configuration can be found in: + +include/dt-bindings/phy/phy.h diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt new file mode 100644 index 000000000..8772900e0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt @@ -0,0 +1,77 @@ +STMicroelectronics STi MIPHY365x PHY binding +============================================ + +This binding describes a miphy device that is used to control PHY hardware +for SATA and PCIe. + +Required properties (controller (parent) node): +- compatible : Should be "st,miphy365x-phy" +- st,syscfg : Phandle / integer array property. Phandle of sysconfig group + containing the miphy registers and integer array should contain + an entry for each port sub-node, specifying the control + register offset inside the sysconfig group. + +Required nodes : A sub-node is required for each channel the controller + provides. Address range information including the usual + 'reg' and 'reg-names' properties are used inside these + nodes to describe the controller's topology. These nodes + are translated by the driver's .xlate() function. + +Required properties (port (child) node): +- #phy-cells : Should be 1 (See second example) + Cell after port phandle is device type from: + - PHY_TYPE_SATA + - PHY_TYPE_PCI +- reg : Address and length of register sets for each device in + "reg-names" +- reg-names : The names of the register addresses corresponding to the + registers filled in "reg": + - sata: For SATA devices + - pcie: For PCIe devices + +Optional properties (port (child) node): +- st,sata-gen : Generation of locally attached SATA IP. Expected values + are {1,2,3). If not supplied generation 1 hardware will + be expected +- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp) +- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp) + +Example: + + miphy365x_phy: miphy365x@fe382000 { + compatible = "st,miphy365x-phy"; + st,syscfg = <&syscfg_rear 0x824 0x828>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@fe382000 { + reg = <0xfe382000 0x100>, <0xfe394000 0x100>; + reg-names = "sata", "pcie"; + #phy-cells = <1>; + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;; + reg-names = "sata", "pcie", "syscfg"; + #phy-cells = <1>; + st,pcie-tx-pol-inv; + }; + }; + +Specifying phy control of devices +================================= + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type. + +Example: + +#include + + sata0: sata@fe380000 { + ... + phys = <&phy_port0 PHY_TYPE_SATA>; + ... + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt new file mode 100644 index 000000000..dd75b676b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -0,0 +1,162 @@ +MediaTek T-PHY binding +-------------------------- + +T-phy controller supports physical layer functionality for a number of +controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. + +Required properties (controller (parent) node): + - compatible : should be one of + "mediatek,generic-tphy-v1" + "mediatek,generic-tphy-v2" + "mediatek,mt2701-u3phy" (deprecated) + "mediatek,mt2712-u3phy" (deprecated) + "mediatek,mt8173-u3phy"; + make use of "mediatek,generic-tphy-v1" on mt2701 instead and + "mediatek,generic-tphy-v2" on mt2712 instead. + +- #address-cells: the number of cells used to represent physical + base addresses. +- #size-cells: the number of cells used to represent the size of an address. +- ranges: the address mapping relationship to the parent, defined with + - empty value: if optional 'reg' is used. + - non-empty value: if optional 'reg' is not used. should set + the child's base address to 0, the physical address + within parent's address space, and the length of + the address map. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple ports, + exclude port's private register. It is needed on mt2701 + and mt8173, but not on mt2712. + - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate + calibrate + - mediatek,src-coef : coefficient for slew rate calibrate, depends on + SoC process + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + +Optional properties (PHY_TYPE_USB2 port (child) node): +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : may contain + "ref": 48M reference clock for HighSpeed (digital) phy; and 26M + reference clock for SuperSpeed (digital) phy, sometimes is + 24M, 25M or 27M, depended on platform. + "da_ref": the reference clock of analog phy, used if the clocks + of analog and digital phys are separated, otherwise uses + "ref" clock only if needed. + +- mediatek,eye-src : u32, the value of slew rate calibrate +- mediatek,eye-vrt : u32, the selection of VRT reference voltage +- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage +- mediatek,bc12 : bool, enable BC12 of u2phy if support it +- mediatek,discth : u32, the selection of disconnect threshold +- mediatek,intr : u32, the selection of internal R (resistance) + +Example: + +u3phy: usb-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11290000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + u2port0: usb-phy@11290800 { + reg = <0 0x11290800 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11290900 { + reg = <0 0x11290800 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@11291000 { + reg = <0 0x11291000 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + }; +}; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include + +usb30: usb@11270000 { + ... + phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; + phy-names = "usb2-0", "usb3-0"; + ... +}; + + +Layout differences of banks between mt8173/mt2701 and mt2712 +------------------------------------------------------------- +mt8173 and mt2701: +port offset bank +shared 0x0000 SPLLC + 0x0100 FMREG +u2 port0 0x0800 U2PHY_COM +u3 port0 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 U2PHY_COM +u3 port1 0x1100 U3PHYD + 0x1200 U3PHYD_BANK2 + 0x1300 U3PHYA + 0x1400 U3PHYA_DA +u2 port2 0x1800 U2PHY_COM + ... + +mt2712: +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u3 port0 0x0700 SPLLC + 0x0800 CHIP + 0x0900 U3PHYD + 0x0a00 U3PHYD_BANK2 + 0x0b00 U3PHYA + 0x0c00 U3PHYA_DA +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u3 port1 0x1700 SPLLC + 0x1800 CHIP + 0x1900 U3PHYD + 0x1a00 U3PHYD_BANK2 + 0x1b00 U3PHYA + 0x1c00 U3PHYA_DA +u2 port2 0x2000 MISC + ... + + SPLLC shared by u3 ports and FMREG shared by u2 ports on +mt8173/mt2701 are put back into each port; a new bank MISC for +u2 ports and CHIP for u3 ports are added on mt2712. diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt new file mode 100644 index 000000000..5789029a1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt @@ -0,0 +1,38 @@ +MediaTek Universal Flash Storage (UFS) M-PHY binding +-------------------------------------------------------- + +UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. +Each UFS M-PHY node should have its own node. + +To bind UFS M-PHY with UFS host controller, the controller node should +contain a phandle reference to UFS M-PHY node. + +Required properties for UFS M-PHY nodes: +- compatible : Compatible list, contains the following controller: + "mediatek,mt8183-ufsphy" for ufs phy + persent on MT81xx chipsets. +- reg : Address and length of the UFS M-PHY register set. +- #phy-cells : This property shall be set to 0. +- clocks : List of phandle and clock specifier pairs. +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. Following clocks are + mandatory. + "unipro": Unipro core control clock. + "mp": M-PHY core control clock. + +Example: + + ufsphy: phy@11fa0000 { + compatible = "mediatek,mt8183-ufsphy"; + reg = <0 0x11fa0000 0 0xc000>; + #phy-cells = <0>; + + clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>, + <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>; + clock-names = "unipro", "mp"; + }; + + ufshci@11270000 { + ... + phys = <&ufsphy>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt new file mode 100644 index 000000000..e7caefa0b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt @@ -0,0 +1,109 @@ +MediaTek XS-PHY binding +-------------------------- + +The XS-PHY controller supports physical layer functionality for USB3.1 +GEN2 controller on MediaTek SoCs. + +Required properties (controller (parent) node): + - compatible : should be "mediatek,-xsphy", "mediatek,xsphy", + soc-model is the name of SoC, such as mt3611 etc; + when using "mediatek,xsphy" compatible string, you need SoC specific + ones in addition, one of: + - "mediatek,mt3611-xsphy" + + - #address-cells, #size-cells : should use the same values as the root node + - ranges: must be present + +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple U3 ports, + exclude port's private register, if only U2 ports provided, + shouldn't use the property. + - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate + calibrate + - mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on + SoC process + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : must contain + "ref": 48M reference clock for HighSpeed analog phy; and 26M + reference clock for SuperSpeedPlus analog phy, sometimes is + 24M, 25M or 27M, depended on platform. +- #phy-cells : should be 1 + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + +The following optional properties are only for debug or HQA test +Optional properties (PHY_TYPE_USB2 port (child) node): +- mediatek,eye-src : u32, the value of slew rate calibrate +- mediatek,eye-vrt : u32, the selection of VRT reference voltage +- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage +- mediatek,efuse-intr : u32, the selection of Internal Resistor + +Optional properties (PHY_TYPE_USB3 port (child) node): +- mediatek,efuse-intr : u32, the selection of Internal Resistor +- mediatek,efuse-tx-imp : u32, the selection of TX Impedance +- mediatek,efuse-rx-imp : u32, the selection of RX Impedance + +Banks layout of xsphy +------------------------------------------------------------- +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u2 port2 0x2000 MISC + ... +u31 common 0x3000 DIG_GLB + 0x3100 PHYA_GLB +u31 port0 0x3400 DIG_LN_TOP + 0x3500 DIG_LN_TX0 + 0x3600 DIG_LN_RX0 + 0x3700 DIG_LN_DAIF + 0x3800 PHYA_LN +u31 port1 0x3a00 DIG_LN_TOP + 0x3b00 DIG_LN_TX0 + 0x3c00 DIG_LN_RX0 + 0x3d00 DIG_LN_DAIF + 0x3e00 PHYA_LN + ... + +DIG_GLB & PHYA_GLB are shared by U31 ports. + +Example: + +u3phy: usb-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0 0x11c43000 0 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0 0x11c40000 0 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0 0x11c43400 0 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt new file mode 100644 index 000000000..8c60e6985 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt @@ -0,0 +1,94 @@ +MVEBU comphy drivers +-------------------- + +COMPHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 7k/8k (on the CP110) +* Armada 3700 +It provides a number of shared PHYs used by various interfaces (network, SATA, +USB, PCIe...). + +Required properties: + +- compatible: should be one of: + * "marvell,comphy-cp110" for Armada 7k/8k + * "marvell,comphy-a3700" for Armada 3700 +- reg: should contain the COMPHY register(s) location(s) and length(s). + * 1 entry for Armada 7k/8k + * 4 entries for Armada 3700 along with the corresponding reg-names + properties, memory areas are: + * Generic COMPHY registers + * Lane 1 (PCIe/GbE) + * Lane 0 (USB3/GbE) + * Lane 2 (SATA/USB3) +- marvell,system-controller: should contain a phandle to the system + controller node (only for Armada 7k/8k) +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional properlties: + +- clocks: pointers to the reference clocks for this device (CP110 only), + consequently: MG clock, MG Core clock, AXI clock. +- clock-names: names of used clocks for CP110 only, must be : + "mg_clk", "mg_core_clk" and "axi_clk". + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: COMPHY lane number. +- #phy-cells : from the generic PHY bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Examples: + + cpm_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cpm_syscon0>; + clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, + <&CP110_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt new file mode 100644 index 000000000..aa99ceec7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt @@ -0,0 +1,38 @@ +MVEBU A3700 UTMI PHY +-------------------- + +USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 3700 + +On Armada 3700, there are two USB controllers, one is compatible with the USB2 +and USB3 specifications and supports OTG. The other one is USB2 compliant and +only supports host mode. Both of these controllers come with a slightly +different UTMI PHY. + +Required Properties: + +- compatible: Should be one of: + * "marvell,a3700-utmi-host-phy" for the PHY connected to + the USB2 host-only controller. + * "marvell,a3700-utmi-otg-phy" for the PHY connected to + the USB3 and USB2 OTG capable controller. +- reg: PHY IP register range. +- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared + region covering registers related to both the host + controller and the PHY. +- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0. + + +Example: + + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,armada-3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", "syscon"; + reg = <0x5f800 0x800>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt new file mode 100644 index 000000000..64afdd13d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt @@ -0,0 +1,42 @@ +* Marvell MVEBU SATA PHY + +Power control for the SATA phy found on Marvell MVEBU SoCs. + +This document extends the binding described in phy-bindings.txt + +Required properties : + + - reg : Offset and length of the register set for the SATA device + - compatible : Should be "marvell,mvebu-sata-phy" + - clocks : phandle of clock and specifier that supplies the device + - clock-names : Should be "sata" + +Example: + sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + }; + +Armada 375 USB cluster +---------------------- + +Armada 375 comes with an USB2 host and device controller and an USB3 +controller. The USB cluster control register allows to manage common +features of both USB controllers. + +Required properties: + +- compatible: "marvell,armada-375-usb-cluster" +- reg: Should contain usb cluster register location and length. +- #phy-cells : from the generic phy bindings, must be 1. Possible +values are 1 (USB2), 2 (USB3). + +Example: + usbcluster: usb-cluster@18400 { + compatible = "marvell,armada-375-usb-cluster"; + reg = <0x18400 0x4>; + #phy-cells = <1> + }; diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt new file mode 100644 index 000000000..332219860 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt @@ -0,0 +1,43 @@ +Microsemi Ocelot SerDes muxing driver +------------------------------------- + +On Microsemi Ocelot, there is a handful of registers in HSIO address +space for setting up the SerDes to switch port muxing. + +A SerDes X can be "muxed" to work with switch port Y or Z for example. +One specific SerDes can also be used as a PCIe interface. + +Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one. + +There are two kinds of SerDes: SERDES1G supports 10/100Mbps in +half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports +10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode. + +Also, SERDES6G number (aka "macro") 0 is the only interface supporting +QSGMII. + +This is a child of the HSIO syscon ("mscc,ocelot-hsio", see +Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot. + +Required properties: + +- compatible: should be "mscc,vsc7514-serdes" +- #phy-cells : from the generic phy bindings, must be 2. + The first number defines the input port to use for a given + SerDes macro. The second defines the macro to use. They are + defined in dt-bindings/phy/phy-ocelot-serdes.h + +Example: + + serdes: serdes { + compatible = "mscc,vsc7514-serdes"; + #phy-cells = <2>; + }; + + ethernet { + port1 { + phy-handle = <&phy_foo>; + /* Link SERDES1G_5 to port1 */ + phys = <&serdes 1 SERDES1G_5>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt new file mode 100644 index 000000000..d80e36a77 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt @@ -0,0 +1,18 @@ +Marvell PXA USB PHY +------------------- + +Required properties: +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", + "marvell,pxa168-usb-phy", +- #phy-cells: must be 0 + +Example: + usb-phy: usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "okay"; + }; + +This document explains the device tree binding. For general +information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt new file mode 100644 index 000000000..710cccd5e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt @@ -0,0 +1,43 @@ +ROCKCHIP HDMI PHY WITH INNO IP BLOCK + +Required properties: + - compatible : should be one of the listed compatibles: + * "rockchip,rk3228-hdmi-phy", + * "rockchip,rk3328-hdmi-phy"; + - reg : Address and length of the hdmi phy control register set + - clocks : phandle + clock specifier for the phy clocks + - clock-names : string, clock name, must contain "sysclk" for system + control and register configuration, "refoclk" for crystal- + oscillator reference PLL clock input and "refpclk" for pclk- + based refeference PLL clock input. + - #clock-cells: should be 0. + - clock-output-names : shall be the name for the output clock. + - interrupts : phandle + interrupt specified for the hdmiphy interrupt + - #phy-cells : must be 0. See ./phy-bindings.txt for details. + +Optional properties for rk3328-hdmi-phy: + - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse + - nvmem-cell-names : "cpu-version" to read the chip version, required + for adjustment to some frequency settings + +Example: + hdmi_phy: hdmi-phy@12030000 { + compatible = "rockchip,rk3228-hdmi-phy"; + reg = <0x12030000 0x10000>; + #phy-cells = <0>; + clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + #clock-cells = <0>; + clock-output-names = "hdmi_phy"; + status = "disabled"; + }; + +Then the PHY can be used in other nodes such as: + + hdmi: hdmi@200a0000 { + compatible = "rockchip,rk3228-dw-hdmi"; + ... + phys = <&hdmi_phy>; + phy-names = "hdmi"; + ... + }; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml new file mode 100644 index 000000000..fb29ad807 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip USB2.0 phy with inno IP block + +maintainers: + - Heiko Stuebner + +properties: + compatible: + enum: + - rockchip,px30-usb2phy + - rockchip,rk3228-usb2phy + - rockchip,rk3328-usb2phy + - rockchip,rk3366-usb2phy + - rockchip,rk3399-usb2phy + - rockchip,rv1108-usb2phy + + reg: + maxItems: 1 + + clock-output-names: + description: + The usb 480m output clock name. + + "#clock-cells": + const: 0 + + "#phy-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: phyclk + + assigned-clocks: + description: + Phandle of the usb 480m clock. + + assigned-clock-parents: + description: + Parent of the usb 480m clock. + Select between usb-phy output 480m and xin24m. + Refer to clk/clock-bindings.txt for generic clock consumer properties. + + extcon: + description: + Phandle to the extcon device providing the cable state for the otg phy. + + rockchip,usbgrf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the 'usb general register files'. + When set the driver will request its phandle as one companion-grf + for some special SoCs (e.g rv1108). + + host-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + description: host linestate interrupt + + interrupt-names: + const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + + otg-port: + type: object + additionalProperties: false + + properties: + "#phy-cells": + const: 0 + + interrupts: + minItems: 1 + maxItems: 3 + + interrupt-names: + oneOf: + - const: linestate + - const: otg-mux + - items: + - const: otg-bvalid + - const: otg-id + - const: linestate + + phy-supply: + description: + Phandle to a regulator that provides power to VBUS. + See ./phy-bindings.txt for details. + + required: + - "#phy-cells" + - interrupts + - interrupt-names + +required: + - compatible + - reg + - clock-output-names + - "#clock-cells" + - "#phy-cells" + - host-port + - otg-port + +additionalProperties: false + +examples: + - | + #include + #include + #include + u2phy0: usb2-phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + clock-output-names = "clk_usbphy0_480m"; + #clock-cells = <0>; + #phy-cells = <0>; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = ; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = , + , + ; + interrupt-names = "otg-bvalid", "otg-id", "linestate"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt new file mode 100644 index 000000000..960da7fca --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt @@ -0,0 +1,84 @@ +* ROCKCHIP type-c PHY +--------------------- + +Required properties: + - compatible : must be "rockchip,rk3399-typec-phy" + - reg: Address and length of the usb phy control register set + - rockchip,grf : phandle to the syscon managing the "general + register files" + - clocks : phandle + clock specifier for the phy clocks + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref"; + - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or + <&cru SCLK_UPHY1_TCPDCORE>; + - assigned-clock-rates : the phy core clk frequency, shall be: 50000000 + - resets : a list of phandle + reset specifier pairs + - reset-names : string reset name, must be: + "uphy", "uphy-pipe", "uphy-tcphy" + +Optional properties: + - extcon : extcon specifier for the Power Delivery + +Required nodes : a sub-node is required for each port the phy provides. + The sub-node name is used to identify dp or usb3 port, + and shall be the following entries: + * "dp-port" : the name of DP port. + * "usb3-port" : the name of USB3 port. + +Required properties (port (child) node): +- #phy-cells : must be 0, See ./phy-bindings.txt for details. + +Deprecated properties, do not use in new device tree sources, these +properties are determined by the compatible value: + - rockchip,typec-conn-dir + - rockchip,usb3tousb2-en + - rockchip,external-psm + - rockchip,pipe-status + +Example: + tcphy0: phy@ff7c0000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff7c0000 0x0 0x40000>; + rockchip,grf = <&grf>; + extcon = <&fusb0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY0>, + <&cru SRST_UPHY0_PIPE_L00>, + <&cru SRST_P_UPHY0_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + + tcphy0_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy0_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + tcphy1: phy@ff800000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff800000 0x0 0x40000>; + rockchip,grf = <&grf>; + extcon = <&fusb1>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY1>, + <&cru SRST_UPHY1_PIPE_L00>, + <&cru SRST_P_UPHY1_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + + tcphy1_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy1_usb3: usb3-port { + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt new file mode 100644 index 000000000..de6a706ab --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt @@ -0,0 +1,24 @@ +ST STiH407 USB PHY controller + +This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3 +host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics. + +Required properties: +- compatible : should be "st,stih407-usb2-phy" +- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets +- resets : list of phandle and reset specifier pairs. There should be two entries, one + for the whole phy and one for the port +- reset-names : list of reset signal names. Should be "global" and "port" +See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +See: Documentation/devicetree/bindings/reset/reset.txt + +Example: + +usb2_picophy0: usbpicophy@f8 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0x100 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt new file mode 100644 index 000000000..725ae71ae --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt @@ -0,0 +1,73 @@ +STMicroelectronics STM32 USB HS PHY controller + +The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI +switch. It controls PHY configuration and status, and the UTMI+ switch that +selects either OTG or HOST controller for the second PHY port. It also sets +PLL configuration. + +USBPHYC + |_ PLL + | + |_ PHY port#1 _________________ HOST controller + | _ | + | / 1|________________| + |_ PHY port#2 ----| |________________ + | \_0| | + |_ UTMI switch_______| OTG controller + + +Phy provider node +================= + +Required properties: +- compatible: must be "st,stm32mp1-usbphyc" +- reg: address and length of the usb phy control register set +- clocks: phandle + clock specifier for the PLL phy clock +- #address-cells: number of address cells for phys sub-nodes, must be <1> +- #size-cells: number of size cells for phys sub-nodes, must be <0> + +Optional properties: +- assigned-clocks: phandle + clock specifier for the PLL phy clock +- assigned-clock-parents: the PLL phy clock parent +- resets: phandle + reset specifier + +Required nodes: one sub-node per port the controller provides. + +Phy sub-nodes +============== + +Required properties: +- reg: phy port index +- phy-supply: phandle to the regulator providing 3V3 power to the PHY, + see phy-bindings.txt in the same directory. +- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY +- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY +- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY + port#1 and must be <1> for PHY port#2, to select USB controller + + +Example: + usbphyc: usb-phy@5a006000 { + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc_clk USBPHY_K>; + resets = <&rcc_rst USBPHY_R>; + #address-cells = <1>; + #size-cells = <0>; + + usbphyc_port0: usb-phy@0 { + reg = <0>; + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18> + #phy-cells = <0>; + }; + + usbphyc_port1: usb-phy@1 { + reg = <1>; + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18> + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt new file mode 100644 index 000000000..d23ff90ba --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt @@ -0,0 +1,28 @@ +NVIDIA Tegra194 P2U binding + +Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High +Speed) each interfacing with 12 and 8 P2U instances respectively. +A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE +interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe +lane. + +Required properties: +- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u". +- reg: Should be the physical address space and length of respective each P2U + instance. +- reg-names: Must include the entry "ctl". + +Required properties for PHY port node: +- #phy-cells: Defined by generic PHY bindings. Must be 0. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties. + +Example: + +p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt new file mode 100644 index 000000000..afbc7e24a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt @@ -0,0 +1,29 @@ +IMG Pistachio USB PHY +===================== + +Required properties: +-------------------- + - compatible: Must be "img,pistachio-usb-phy". + - #phy-cells: Must be 0. See ./phy-bindings.txt for details. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include "usb_phy". + - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,refclk: Indicates the reference clock source for the USB PHY. + See for a list of valid values. + +Optional properties: +-------------------- + - phy-supply: USB VBUS supply. Must supply 5.0V. + +Example: +-------- +usb_phy: usb-phy { + compatible = "img,pistachio-usb-phy"; + clocks = <&clk_core CLK_USB_PHY>; + clock-names = "usb_phy"; + phy-supply = <&usb_vbus>; + img,refclk = ; + img,cr-top = <&cr_top>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt new file mode 100644 index 000000000..660a13ca9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt @@ -0,0 +1,18 @@ +* Marvell PXA1928 USB and HSIC PHYs + +Required properties: +- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" +- reg: base address and length of the registers +- clocks - A single clock. From common clock binding. +- #phys-cells: should be 0. From commmon phy binding. +- resets: reference to the reset controller + +Example: + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0xe0>; + clocks = <&apmu_clocks PXA1928_CLK_USB>; + #phy-cells = <0>; + }; + diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml new file mode 100644 index 000000000..17f132ce5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER + +maintainers: + - Ansuel Smith + +description: + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer + controllers used in ipq806x. Each DWC3 PHY controller should have its + own node. + +properties: + compatible: + const: qcom,ipq806x-usb-phy-hs + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: xo + +required: + - compatible + - "#phy-cells" + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + hs_phy_0: phy@110f8800 { + compatible = "qcom,ipq806x-usb-phy-hs"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml new file mode 100644 index 000000000..17fd7f6b8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER + +maintainers: + - Ansuel Smith + +description: + DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer + controllers used in ipq806x. Each DWC3 PHY controller should have its + own node. + +properties: + compatible: + const: qcom,ipq806x-usb-phy-ss + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: ref + - const: xo + + qcom,rx-eq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for rx_eq. + default: 4 + maximum: 7 + + qcom,tx-deamp-3_5db: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for transmit preemphasis. + default: 23 + maximum: 63 + + qcom,mpll: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Override value for mpll. + default: 0 + maximum: 7 + +required: + - compatible + - "#phy-cells" + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + + ss_phy_0: phy@110f8830 { + compatible = "qcom,ipq806x-usb-phy-ss"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml new file mode 100644 index 000000000..185cdea9c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -0,0 +1,318 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP PHY controller + +maintainers: + - Manu Gautam + +description: + QMP phy controller supports physical layer functionality for a number of + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB. + +properties: + compatible: + enum: + - qcom,ipq8074-qmp-pcie-phy + - qcom,ipq8074-qmp-usb3-phy + - qcom,msm8996-qmp-pcie-phy + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-ufs-phy + - qcom,msm8998-qmp-usb3-phy + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sdm845-qmp-usb3-uni-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + + reg: + items: + - description: Address and length of PHY's common serdes block. + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk pll block. + +#Required nodes: +patternProperties: + "^phy@[0-9a-f]+$": + type: object + description: + Each device node of QMP phy is required to have as many child nodes as + the number of lanes the PHY has. + +required: + - compatible + - reg + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qmp-usb3-uni-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + - description: phy's ahb cfg block reset. + reset-names: + items: + - const: phy + - const: common + - const: cfg + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-qmp-usb3-phy + - qcom,msm8996-qmp-usb3-phy + - qcom,msm8998-qmp-pcie-phy + - qcom,msm8998-qmp-usb3-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + clock-names: + items: + - const: ref + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-qmp-ufs-phy + - qcom,sdm845-qmp-ufs-phy + - qcom,sm8150-qmp-ufs-phy + - qcom,sm8250-qmp-ufs-phy + then: + properties: + clocks: + items: + - description: 19.2 MHz ref clk. + - description: Phy reference aux clock. + clock-names: + items: + - const: ref + - const: ref_aux + resets: + items: + - description: PHY reset in the UFS controller. + reset-names: + items: + - const: ufsphy + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: pipe clk. + clock-names: + items: + - const: pipe_clk + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + reset-names: + items: + - const: phy + - const: common + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-qhp-pcie-phy + - qcom,sdm845-qmp-pcie-phy + then: + properties: + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy refgen clk. + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: refgen + resets: + items: + - description: reset of phy block. + reset-names: + items: + - const: phy + +examples: + - | + #include + usb_2_qmpphy: phy-wrapper@88eb000 { + compatible = "qcom,sdm845-qmp-usb3-uni-phy"; + reg = <0x088eb000 0x18c>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088eb000 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, + <&gcc GCC_USB3_PHY_SEC_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb_2_ssphy: phy@200 { + reg = <0x200 0x128>, + <0x400 0x1fc>, + <0x800 0x218>, + <0x600 0x70>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml new file mode 100644 index 000000000..33974ad10 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml @@ -0,0 +1,212 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QMP USB3 DP PHY controller + +maintainers: + - Manu Gautam + +properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc7180-qmp-usb3-phy + - qcom,sdm845-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-phy + reg: + items: + - description: Address and length of PHY's USB serdes block. + - description: Address and length of the DP_COM control block. + - description: Address and length of PHY's DP serdes block. + + reg-names: + items: + - const: usb + - const: dp_com + - const: dp + + "#clock-cells": + enum: [ 1, 2 ] + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + clocks: + items: + - description: Phy aux clock. + - description: Phy config clock. + - description: 19.2 MHz ref clk. + - description: Phy common block aux clock. + + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + + resets: + items: + - description: reset of phy block. + - description: phy common block reset. + + reset-names: + items: + - const: phy + - const: common + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vddp-ref-clk-supply: + description: + Phandle to a regulator supply to any specific refclk pll block. + +#Required nodes: +patternProperties: + "^usb3-phy@[0-9a-f]+$": + type: object + description: + The USB3 PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + - description: Address and length of pcs_misc. + + clocks: + items: + - description: pipe clock + + clock-names: + items: + - const: pipe0 + + clock-output-names: + items: + - const: usb3_phy_pipe_clk_src + + '#clock-cells': + const: 0 + + '#phy-cells': + const: 0 + + required: + - reg + - clocks + - clock-names + - '#clock-cells' + - '#phy-cells' + + "^dp-phy@[0-9a-f]+$": + type: object + description: + The DP PHY. + + properties: + reg: + items: + - description: Address and length of TX. + - description: Address and length of RX. + - description: Address and length of PCS. + - description: Address and length of TX2. + - description: Address and length of RX2. + + '#clock-cells': + const: 1 + + '#phy-cells': + const: 0 + + required: + - reg + - '#clock-cells' + - '#phy-cells' + +required: + - compatible + - reg + - "#clock-cells" + - "#address-cells" + - "#size-cells" + - ranges + - clocks + - clock-names + - resets + - reset-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; + reg = <0x088e9000 0x18c>, + <0x088e8000 0x10>, + <0x088ea000 0x40>; + reg-names = "usb", "dp_com", "dp"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x088e9000 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + usb3-phy@200 { + reg = <0x200 0x128>, + <0x400 0x200>, + <0xc00 0x218>, + <0x600 0x128>, + <0x800 0x200>, + <0xa00 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp-phy@88ea200 { + reg = <0xa200 0x200>, + <0xa400 0x200>, + <0xaa00 0x200>, + <0xa600 0x200>, + <0xa800 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml new file mode 100644 index 000000000..d457fb6a4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm QUSB2 phy controller + +maintainers: + - Manu Gautam + +description: + QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,ipq8074-qusb2-phy + - qcom,msm8996-qusb2-phy + - qcom,msm8998-qusb2-phy + - items: + - enum: + - qcom,sc7180-qusb2-phy + - qcom,sdm845-qusb2-phy + - const: qcom,qusb2-v2-phy + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + items: + - description: phy config clock + - description: 19.2 MHz ref clk + - description: phy interface clock (Optional) + + clock-names: + minItems: 2 + maxItems: 3 + items: + - const: cfg_ahb + - const: ref + - const: iface + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + + vdda-phy-dpdm-supply: + description: + Phandle to 3.1V regulator supply to Dp/Dm port signals. + + resets: + maxItems: 1 + description: + Phandle to reset to phy block. + + nvmem-cells: + maxItems: 1 + description: + Phandle to nvmem cell that contains 'HS Tx trim' + tuning parameter value for qusb2 phy. + + qcom,tcsr-syscon: + description: + Phandle to TCSR syscon register region. + $ref: /schemas/types.yaml#/definitions/phandle + +if: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy +then: + properties: + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdda-pll-supply + - vdda-phy-dpdm-supply + - resets + +additionalProperties: false + +examples: + - | + #include + hsusb_phy: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt new file mode 100644 index 000000000..2cb2168ce --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt @@ -0,0 +1,76 @@ +Qualcomm's APQ8016/MSM8916 USB transceiver controller + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-8x16-phy". + +- reg: + Usage: required + Value type: + Definition: USB PHY base address and length of the register map + +- clocks: + Usage: required + Value type: + Definition: See clock-bindings.txt section "consumers". List of + two clock specifiers for interface and core controller + clocks. + +- clock-names: + Usage: required + Value type: + Definition: Must contain "iface" and "core" strings. + +- vddcx-supply: + Usage: required + Value type: + Definition: phandle to the regulator VDCCX supply node. + +- v1p8-supply: + Usage: required + Value type: + Definition: phandle to the regulator 1.8V supply node. + +- v3p3-supply: + Usage: required + Value type: + Definition: phandle to the regulator 3.3V supply node. + +- resets: + Usage: required + Value type: + Definition: See reset.txt section "consumers". PHY reset specifier. + +- reset-names: + Usage: required + Value type: + Definition: Must contain "phy" string. + +- switch-gpio: + Usage: optional + Value type: + Definition: Some boards are using Dual SPDT USB Switch, witch is + controlled by GPIO to de/multiplex D+/D- USB lines + between connectors. + +Example: + usb_phy: phy@78d9000 { + compatible = "qcom,usb-8x16-phy"; + reg = <0x78d9000 0x400>; + + vddcx-supply = <&pm8916_s1_corner>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + + resets = <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy"; + + // D+/D- lines: 1 - Routed to HUB, 0 - Device connector + switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + }; + diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml new file mode 100644 index 000000000..ca6a0836b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY + +maintainers: + - Bryan O'Donoghue + +description: | + Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY + +properties: + compatible: + enum: + - qcom,usb-hs-28nm-femtophy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc ref clock + - description: PHY AHB clock + - description: Rentention clock + + clock-names: + items: + - const: ref + - const: ahb + - const: sleep + + resets: + items: + - description: PHY core reset + - description: POR reset + + reset-names: + items: + - const: phy + - const: por + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + vdda3p3-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vdd-supply + - vdda1p8-supply + - vdda3p3-supply + +additionalProperties: false + +examples: + - | + #include + #include + usb2_phy_prim: phy@7a000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0007a000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "ahb", "sleep"; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy", "por"; + vdd-supply = <&vreg_l4_1p2>; + vdda1p8-supply = <&vreg_l5_1p8>; + vdda3p3-supply = <&vreg_l12_3p3>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt new file mode 100644 index 000000000..b3b75c1e6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt @@ -0,0 +1,84 @@ +Qualcomm's USB HS PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the + following: + + "qcom,usb-hs-phy-apq8064" + "qcom,usb-hs-phy-msm8916" + "qcom,usb-hs-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: + Definition: Should contain clock specifier for the reference and sleep + clocks + +- clock-names: + Usage: required + Value type: + Definition: Should contain "ref" and "sleep" for the reference and sleep + clocks respectively + +- resets: + Usage: required + Value type: + Definition: Should contain the phy and POR resets + +- reset-names: + Usage: required + Value type: + Definition: Should contain "phy" and "por" for the phy and POR resets + respectively + +- v3p3-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 3.3V supply + +- v1p8-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V supply + +- extcon: + Usage: optional + Value type: + Definition: Should contain the vbus extcon + +- qcom,init-seq: + Usage: optional + Value type: + Definition: Should contain a sequence of ULPI address and value pairs to + program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related + to Device Mode Eye Diagram test. The addresses are offsets + from the ULPI_EXT_VENDOR_SPECIFIC address, for example, + <0x1 0x53> would mean "write the value 0x53 to address 0x81". + +EXAMPLE + +otg: usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt new file mode 100644 index 000000000..3c7cb2be4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt @@ -0,0 +1,65 @@ +Qualcomm's USB HSIC PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the + following: + + "qcom,usb-hsic-phy-mdm9615" + "qcom,usb-hsic-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: + Definition: Should contain clock specifier for phy, calibration and + a calibration sleep clock + +- clock-names: + Usage: required + Value type: + Definition: Should contain "phy, "cal" and "cal_sleep" + +- pinctrl-names: + Usage: required + Value type: + Definition: Should contain "init" and "default" in that order + +- pinctrl-0: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch + free state + +- pinctrl-1: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to mux out the HSIC pins + +EXAMPLE + +usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; + assigned-clock-rates = <960000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml new file mode 100644 index 000000000..4949a2851 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys Femto High-Speed USB PHY V2 + +maintainers: + - Wesley Cheng + +description: | + Qualcomm High-Speed USB PHY + +properties: + compatible: + enum: + - qcom,usb-snps-hs-7nm-phy + - qcom,sm8150-usb-hs-phy + - qcom,usb-snps-femto-v2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmhcc ref clock + + clock-names: + items: + - const: ref + + resets: + items: + - description: PHY core reset + + vdda-pll-supply: + description: phandle to the regulator VDD supply node. + + vdda18-supply: + description: phandle to the regulator 1.8V supply node. + + vdda33-supply: + description: phandle to the regulator 3.3V supply node. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - vdda-pll-supply + - vdda18-supply + - vdda33-supply + +additionalProperties: false + +examples: + - | + #include + #include + phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy"; + reg = <0x088e2000 0x400>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml new file mode 100644 index 000000000..bd1388d62 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +maintainers: + - Bryan O'Donoghue + +description: | + Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY + +properties: + compatible: + enum: + - qcom,usb-ss-28nm-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: rpmcc clock + - description: PHY AHB clock + - description: SuperSpeed pipe clock + + clock-names: + items: + - const: ref + - const: ahb + - const: pipe + + vdd-supply: + description: phandle to the regulator VDD supply node. + + vdda1p8-supply: + description: phandle to the regulator 1.8V supply node. + + resets: + items: + - description: COM reset + - description: PHY reset line + + reset-names: + items: + - const: com + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda1p8-supply + +additionalProperties: false + +examples: + - | + #include + #include + usb3_phy: usb3-phy@78000 { + compatible = "qcom,usb-ss-28nm-phy"; + reg = <0x78000 0x400>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "ref", "ahb", "pipe"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "com", "phy"; + vdd-supply = <&vreg_l3_1p05>; + vdda1p8-supply = <&vreg_l5_1p8>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt new file mode 100644 index 000000000..952f6c96b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt @@ -0,0 +1,24 @@ +Qualcomm APQ8064 SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,apq8064-sata-phy". +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. +- clock-names: must be "cfg" for phy config clock. + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt new file mode 100644 index 000000000..76bfbd056 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt @@ -0,0 +1,23 @@ +Qualcomm IPQ806x SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,ipq806x-sata-phy" +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: must be exactly one entry +- clock-names: must be "cfg" + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 000000000..30064253f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,42 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + - #clock-cells: must be 0 + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml new file mode 100644 index 000000000..3e7191b16 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcom IPQ40xx Dakota HS/SS USB PHY + +maintainers: + - Robert Marko + +properties: + compatible: + enum: + - qcom,usb-ss-ipq4019-phy + - qcom,usb-hs-ipq4019-phy + + reg: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: por_rst + - const: srif_rst + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - resets + - reset-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include + + hsphy@a8000 { + #phy-cells = <0>; + compatible = "qcom,usb-hs-ipq4019-phy"; + reg = <0xa8000 0x40>; + resets = <&gcc USB2_HSPHY_POR_ARES>, + <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + }; diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt new file mode 100644 index 000000000..9d2868a43 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt @@ -0,0 +1,23 @@ +Mediatek/Ralink USB PHY + +Required properties: + - compatible: "ralink,rt3352-usbphy" + "mediatek,mt7620-usbphy" + "mediatek,mt7628-usbphy" + - reg: required for "mediatek,mt7628-usbphy", unused otherwise + - #phy-cells: should be 0 + - ralink,sysctl: a phandle to a ralink syscon register region + - resets: the two reset controllers for host and device + - reset-names: the names of the 2 reset controllers + +Example: + +usbphy: phy { + compatible = "mediatek,mt7628-usbphy"; + reg = <0x10120000 0x1000>; + #phy-cells = <0>; + + ralink,sysctl = <&sysc>; + resets = <&rstctrl 22 &rstctrl 25>; + reset-names = "host", "device"; +}; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt new file mode 100644 index 000000000..a3bd1c449 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -0,0 +1,112 @@ +* Renesas R-Car generation 2 USB PHY + +This file provides information on what the device node for the R-Car generation +2 USB PHY contains. + +Required properties: +- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC. + "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. + "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC. + "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC. + "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. + "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. + "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or + RZ/G1 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + +- reg: offset and length of the register block. +- #address-cells: number of address cells for the USB channel subnodes, must + be <1>. +- #size-cells: number of size cells for the USB channel subnodes, must be <0>. +- clocks: clock phandle and specifier pair. +- clock-names: string, clock input name, must be "usbhs". + +The USB PHY device tree node should have the subnodes corresponding to the USB +channels. These subnodes must contain the following properties: +- reg: the USB controller selector; see the table below for the values. +- #phy-cells: see phy-bindings.txt in the same directory, must be <1>. + +The phandle's argument in the PHY specifier is the USB controller selector for +the USB channel other than r8a77470 SoC; see the selector meanings below: + ++-----------+---------------+---------------+ +|\ Selector | | | ++ --------- + 0 | 1 | +| Channel \| | | ++-----------+---------------+---------------+ +| 0 | PCI EHCI/OHCI | HS-USB | +| 2 | PCI EHCI/OHCI | xHCI | ++-----------+---------------+---------------+ + +For r8a77470 SoC;see the selector meaning below: + ++-----------+---------------+---------------+ +|\ Selector | | | ++ --------- + 0 | 1 | +| Channel \| | | ++-----------+---------------+---------------+ +| 0 | EHCI/OHCI | HS-USB | ++-----------+---------------+---------------+ + +Example (Lager board): + + usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + +Example (iWave RZ/G1C sbc): + + usbphy0: usb-phy0@e6590100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 704>; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; + + usbphy1: usb-phy@e6598100 { + compatible = "renesas,usb-phy-r8a77470", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6598100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 706>; + clock-names = "usbhs"; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 706>; + + usb1: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt new file mode 100644 index 000000000..63853b35e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt @@ -0,0 +1,24 @@ +* Renesas R-Car generation 3 PCIe PHY + +This file provides information on what the device node for the R-Car +generation 3 PCIe PHY contains. + +Required properties: +- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the + R8A77980 SoC. +- reg: offset and length of the register block. +- clocks: clock phandle and specifier pair. +- power-domains: power domain phandle and specifier pair. +- resets: reset phandle and specifier pair. +- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. + +Example (R-Car V3H): + + pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0 0xe65d0000 0 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc 32>; + resets = <&cpg 319>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml new file mode 100644 index 000000000..829e8c7e4 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 2.0 PHY + +maintainers: + - Yoshihiro Shimoda + +properties: + compatible: + oneOf: + - items: + - const: renesas,usb2-phy-r8a77470 # RZ/G1C + + - items: + - enum: + - renesas,usb2-phy-r7s9210 # RZ/A2 + - renesas,usb2-phy-r8a774a1 # RZ/G2M + - renesas,usb2-phy-r8a774b1 # RZ/G2N + - renesas,usb2-phy-r8a774c0 # RZ/G2E + - renesas,usb2-phy-r8a774e1 # RZ/G2H + - renesas,usb2-phy-r8a7795 # R-Car H3 + - renesas,usb2-phy-r8a7796 # R-Car M3-W + - renesas,usb2-phy-r8a77961 # R-Car M3-W+ + - renesas,usb2-phy-r8a77965 # R-Car M3-N + - renesas,usb2-phy-r8a77990 # R-Car E3 + - renesas,usb2-phy-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-usb2-phy + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: fck + - const: usb_x1 + + '#phy-cells': + enum: [0, 1] # and 0 is deprecated. + description: | + The phandle's argument in the PHY specifier is the INT_STATUS bit of + controller. + - 1 = USBH_INTA (OHCI) + - 2 = USBH_INTB (EHCI) + - 3 = UCOM_INT (OTG and BC) + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + minItems: 1 + maxItems: 2 + items: + - description: reset of USB 2.0 host side + - description: reset of USB 2.0 peripheral side + + vbus-supply: + description: | + Phandle to a regulator that provides power to the VBUS. This regulator + will be managed during the PHY power on/off sequence. + + renesas,no-otg-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: | + specify when a board does not provide proper otg pins. + + dr_mode: true + +if: + properties: + compatible: + items: + enum: + - renesas,usb2-phy-r7s9210 +then: + required: + - clock-names + +required: + - compatible + - reg + - clocks + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include + #include + #include + + usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee080200 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + #phy-cells = <1>; + }; + + usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy"; + reg = <0xee0a0200 0x700>; + clocks = <&cpg CPG_MOD 702>; + #phy-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml new file mode 100644 index 000000000..f3ef738a3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car generation 3 USB 3.0 PHY + +maintainers: + - Yoshihiro Shimoda + +properties: + compatible: + items: + - enum: + - renesas,r8a774a1-usb3-phy # RZ/G2M + - renesas,r8a774b1-usb3-phy # RZ/G2N + - renesas,r8a774e1-usb3-phy # RZ/G2H + - renesas,r8a7795-usb3-phy # R-Car H3 + - renesas,r8a7796-usb3-phy # R-Car M3-W + - renesas,r8a77961-usb3-phy # R-Car M3-W+ + - renesas,r8a77965-usb3-phy # R-Car M3-N + - const: renesas,rcar-gen3-usb3-phy + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + # If you want to use the ssc, the clock-frequency of usb_extal + # must not be 0. + minItems: 2 + maxItems: 3 + items: + - const: usb3-if # The funcional clock + - const: usb3s_clk # The usb3's external clock + - const: usb_extal # The usb2's external clock + + '#phy-cells': + # see phy-bindings.txt in the same directory + const: 0 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,ssc-range: + description: | + Enable/disable spread spectrum clock (ssc). 0 or the property doesn't + exist means disabling the ssc. The actual value will be - ppm. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 4003, 4492, 4980 ] + +required: + - compatible + - reg + - clocks + - clock-names + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include + #include + + usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy"; + reg = <0xe65ee000 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml new file mode 100644 index 000000000..8a3032a3b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip,px30-dsi-dphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip MIPI DPHY with additional LVDS/TTL modes + +maintainers: + - Heiko Stuebner + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - rockchip,px30-dsi-dphy + - rockchip,rk3128-dsi-dphy + - rockchip,rk3368-dsi-dphy + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + - description: Module clock + + clock-names: + items: + - const: ref + - const: pclk + + power-domains: + maxItems: 1 + description: phandle to the associated power domain + + resets: + items: + - description: exclusive PHY reset line + + reset-names: + items: + - const: apb + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + dsi_dphy: phy@ff2e0000 { + compatible = "rockchip,px30-dsi-dphy"; + reg = <0xff2e0000 0x10000>; + clocks = <&pmucru 13>, <&cru 12>; + clock-names = "ref", "pclk"; + resets = <&cru 12>; + reset-names = "apb"; + #phy-cells = <0>; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt new file mode 100644 index 000000000..e3b4809fb --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt @@ -0,0 +1,26 @@ +Rockchip specific extensions to the Analogix Display Port PHY +------------------------------------ + +Required properties: +- compatible : should be one of the following supported values: + - "rockchip.rk3288-dp-phy" +- clocks: from common clock binding: handle to dp clock. + of memory mapped region. +- clock-names: from common clock binding: + Required elements: "24m" +- #phy-cells : from the generic PHY bindings, must be 0; + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt new file mode 100644 index 000000000..e728786f2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -0,0 +1,38 @@ +Rockchip EMMC PHY +----------------------- + +Required properties: + - compatible: rockchip,rk3399-emmc-phy + - #phy-cells: must be 0 + - reg: PHY register address offset and length in "general + register files" + +Optional properties: + - clock-names: Should contain "emmcclk". Although this is listed as optional + (because most boards can get basic functionality without having + access to it), it is strongly suggested. + See ../clock/clock-bindings.txt for details. + - clocks: Should have a phandle to the card clock exported by the SDHCI driver. + - drive-impedance-ohm: Specifies the drive impedance in Ohm. + Possible values are 33, 40, 50, 66 and 100. + If not set, the default value of 50 will be applied. + +Example: + + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + +... + + emmcphy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + drive-impedance-ohm = <50>; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml new file mode 100644 index 000000000..7d888d358 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR MIT) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings + +maintainers: + - Helen Koike + - Ezequiel Garcia + +description: | + The Rockchip SoC has a MIPI D-PHY bus with an RX0 entry which connects to + the ISP1 (Image Signal Processing unit v1.0) for CSI cameras. + +properties: + compatible: + const: rockchip,rk3399-mipi-dphy-rx0 + + clocks: + items: + - description: MIPI D-PHY ref clock + - description: MIPI D-PHY RX0 cfg clock + - description: Video in/out general register file clock + + clock-names: + items: + - const: dphy-ref + - const: dphy-cfg + - const: grf + + '#phy-cells': + const: 0 + + power-domains: + description: Video in/out power domain. + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - '#phy-cells' + - power-domains + +additionalProperties: false + +examples: + - | + + /* + * MIPI D-PHY RX0 use registers in "general register files", it + * should be a child of the GRF. + * + * grf: syscon@ff770000 { + * compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + * ... + * }; + */ + + #include + #include + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt new file mode 100644 index 000000000..b496042f1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt @@ -0,0 +1,36 @@ +Rockchip PCIE PHY +----------------------- + +Required properties: + - compatible: rockchip,rk3399-pcie-phy + - clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. + - clock-names: Must be "refclk" + - resets: Must contain an entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must be "phy" + +Required properties for legacy PHY mode (deprecated): + - #phy-cells: must be 0 + +Required properties for per-lane PHY mode (preferred): + - #phy-cells: must be 1 + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + ... + + pcie_phy: pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + #phy-cells = <0>; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt new file mode 100644 index 000000000..4ed569046 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -0,0 +1,52 @@ +ROCKCHIP USB2 PHY + +Required properties: + - compatible: matching the soc type, one of + "rockchip,rk3066a-usb-phy" + "rockchip,rk3188-usb-phy" + "rockchip,rk3288-usb-phy" + - #address-cells: should be 1 + - #size-cells: should be 0 + +Deprecated properties: + - rockchip,grf : phandle to the syscon managing the "general + register files" - phy should be a child of the GRF instead + +Sub-nodes: +Each PHY should be represented as a sub-node. + +Sub-nodes +required properties: +- #phy-cells: should be 0 +- reg: PHY configure reg address offset in GRF + "0x320" - for PHY attach to OTG controller + "0x334" - for PHY attach to HOST0 controller + "0x348" - for PHY attach to HOST1 controller + +Optional Properties: +- clocks : phandle + clock specifier for the phy clocks +- clock-names: string, clock name, must be "phyclk" +- #clock-cells: for users of the phy-pll, should be 0 +- reset-names: Only allow the following entries: + - phy-reset +- resets: Must contain an entry for each entry in reset-names. +- vbus-supply: power-supply phandle for vbus power source + +Example: + +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + usbphy: phy { + compatible = "rockchip,rk3288-usb-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x320>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml new file mode 100644 index 000000000..636cc501b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series UFS PHY Device Tree Bindings + +maintainers: + - Alim Akhtar + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - samsung,exynos7-ufs-phy + + reg: + maxItems: 1 + + reg-names: + items: + - const: phy-pma + + clocks: + items: + - description: PLL reference clock + - description: symbol clock for input symbol ( rx0-ch0 symbol clock) + - description: symbol clock for input symbol ( rx1-ch1 symbol clock) + - description: symbol clock for output symbol ( tx0 symbol clock) + + clock-names: + items: + - const: ref_clk + - const: rx1_symbol_clk + - const: rx0_symbol_clk + - const: tx0_symbol_clk + + samsung,pmu-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle for PMU system controller interface, used to + control pmu registers bits for ufs m-phy + +required: + - "#phy-cells" + - compatible + - reg + - reg-names + - clocks + - clock-names + - samsung,pmu-syscon + +additionalProperties: false + +examples: + - | + #include + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", "tx0_symbol_clk"; + + }; +... diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt new file mode 100644 index 000000000..7510830a7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -0,0 +1,209 @@ +Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY +------------------------------------------------- + +Required properties: +- compatible : should be one of the listed compatibles: + - "samsung,s5pv210-mipi-video-phy" + - "samsung,exynos5420-mipi-video-phy" + - "samsung,exynos5433-mipi-video-phy" +- #phy-cells : from the generic phy bindings, must be 1; + +In case of s5pv210 and exynos5420 compatible PHYs: +- syscon - phandle to the PMU system controller + +In case of exynos5433 compatible PHY: + - samsung,pmu-syscon - phandle to the PMU system controller + - samsung,disp-sysreg - phandle to the DISP system registers controller + - samsung,cam0-sysreg - phandle to the CAM0 system registers controller + - samsung,cam1-sysreg - phandle to the CAM1 system registers controller + +For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in +the PHY specifier identifies the PHY and its meaning is as follows: + 0 - MIPI CSIS 0, + 1 - MIPI DSIM 0, + 2 - MIPI CSIS 1, + 3 - MIPI DSIM 1. +"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy" +supports additional fifth PHY: + 4 - MIPI CSIS 2. + +Samsung Exynos SoC series Display Port PHY +------------------------------------------------- + +Required properties: +- compatible : should be one of the following supported values: + - "samsung,exynos5250-dp-video-phy" + - "samsung,exynos5420-dp-video-phy" +- samsung,pmu-syscon: phandle for PMU system controller interface, used to + control pmu registers for power isolation. +- #phy-cells : from the generic PHY bindings, must be 0; + +Samsung S5P/Exynos SoC series USB PHY +------------------------------------------------- + +Required properties: +- compatible : should be one of the listed compatibles: + - "samsung,exynos3250-usb2-phy" + - "samsung,exynos4210-usb2-phy" + - "samsung,exynos4x12-usb2-phy" + - "samsung,exynos5250-usb2-phy" + - "samsung,s5pv210-usb2-phy" +- reg : a list of registers used by phy driver + - first and obligatory is the location of phy modules registers +- samsung,sysreg-phandle - handle to syscon used to control the system registers +- samsung,pmureg-phandle - handle to syscon used to control PMU registers +- #phy-cells : from the generic phy bindings, must be 1; +- clocks and clock-names: + - the "phy" clock is required by the phy module, used as a gate + - the "ref" clock is used to get the rate of the clock provided to the + PHY module + +Optional properties: +- vbus-supply: power-supply phandle for vbus power source + +The first phandle argument in the PHY specifier identifies the PHY, its +meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 +and Exynos 4212) it is as follows: + 0 - USB device ("device"), + 1 - USB host ("host"), + 2 - HSIC0 ("hsic0"), + 3 - HSIC1 ("hsic1"), +Exynos3250 has only USB device phy available as phy 0. + +Exynos 4210 and Exynos 4212 use mode switching and require that mode switch +register is supplied. + +Example: + +For Exynos 4412 (compatible with Exynos 4212): + +usbphy: phy@125b0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + reg = <0x125b0000 0x100>; + clocks = <&clock 305>, <&clock 2>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sys_reg>; + samsung,pmureg-phandle = <&pmu_reg>; +}; + +Then the PHY can be used in other nodes such as: + +phy-consumer@12340000 { + phys = <&usbphy 2>; + phy-names = "phy"; +}; + +Refer to DT bindings documentation of particular PHY consumer devices for more +information about required PHYs and the way of specification. + +Samsung SATA PHY Controller +--------------------------- + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible : compatible list, contains "samsung,exynos5250-sata-phy" +- reg : offset and length of the SATA PHY register set; +- #phy-cells : must be zero +- clocks : must be exactly one entry +- clock-names : must be "sata_phyctrl" +- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments +- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments + +Example: + sata_phy: sata-phy@12170000 { + compatible = "samsung,exynos5250-sata-phy"; + reg = <0x12170000 0x1ff>; + clocks = <&clock 287>; + clock-names = "sata_phyctrl"; + #phy-cells = <0>; + samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; + samsung,syscon-phandle = <&pmu_syscon>; + }; + +Device-Tree bindings for sataphy i2c client driver +-------------------------------------------------- + +Required properties: +compatible: Should be "samsung,exynos-sataphy-i2c" +- reg: I2C address of the sataphy i2c device. + +Example: + + sata_phy_i2c:sata-phy@38 { + compatible = "samsung,exynos-sataphy-i2c"; + reg = <0x38>; + }; + +Samsung Exynos5 SoC series USB DRD PHY controller +-------------------------------------------------- + +Required properties: +- compatible : Should be set to one of the following supported values: + - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC, + - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC. + - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC. + - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC. +- reg : Register offset and length of USB DRD PHY register set; +- clocks: Clock IDs array as required by the controller +- clock-names: names of clocks correseponding to IDs in the clock property; + Required clocks: + - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), + used for register access. + - ref: PHY's reference clock (usually crystal clock), used for + PHY operations, associated by phy name. It is used to + determine bit values for clock settings register. + For Exynos5420 this is given as 'sclk_usbphy30' in CMU. + - optional clocks: Exynos5433 & Exynos7 SoC has now following additional + gate clocks available: + - phy_pipe: for PIPE3 phy + - phy_utmi: for UTMI+ phy + - itp: for ITP generation +- samsung,pmu-syscon: phandle for PMU system controller interface, used to + control pmu registers for power isolation. +- #phy-cells : from the generic PHY bindings, must be 1; + +For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy" +compatible PHYs, the second cell in the PHY specifier identifies the +PHY id, which is interpreted as follows: + 0 - UTMI+ type phy, + 1 - PIPE3 type phy, + +Example: + usbdrd_phy: usbphy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock 286>, <&clock 1>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + +- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers, + 'usbdrd_phy' nodes should have numbered alias in the aliases node, + in the form of usbdrdphyN, N = 0, 1... (depending on number of + controllers). +Example: + aliases { + usbdrdphy0 = &usb3_phy0; + usbdrdphy1 = &usb3_phy1; + }; + +Samsung Exynos SoC series PCIe PHY controller +-------------------------------------------------- +Required properties: +- compatible : Should be set to "samsung,exynos5440-pcie-phy" +- #phy-cells : Must be zero +- reg : a register used by phy driver. + - First is for phy register, second is for block register. +- reg-names : Must be set to "phy" and "block". + +Example: + pcie_phy0: pcie-phy@270000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x270000 0x1000>, <0x271000 0x40>; + reg-names = "phy", "block"; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml new file mode 100644 index 000000000..34756347a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier AHCI PHY + +description: | + This describes the deivcetree bindings for PHY interfaces built into + AHCI controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pxs2-ahci-phy + - socionext,uniphier-pxs3-ahci-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + maxItems: 2 + + clock-names: + oneOf: + - items: # for PXs2 + - const: link + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + ahci-glue@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci_phy: phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml new file mode 100644 index 000000000..a06831fd6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier PCIe PHY + +description: | + This describes the devicetree bindings for PHY interface built into + PCIe controller implemented on Socionext UniPhier SoCs. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro5-pcie-phy + - socionext,uniphier-ld20-pcie-phy + - socionext,uniphier-pxs3-pcie-phy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro5 + - const: gio + - const: link + - const: link # for others + + socionext,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to system control to set configurations for phy + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "link"; + clocks = <&sys_clk 24>; + reset-names = "link"; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml new file mode 100644 index 000000000..479b203f7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB2 PHY + +description: | + This describes the devicetree bindings for PHY interface built into + USB2 controller implemented on Socionext UniPhier SoCs. + Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3 + controller doesn't include its own High-Speed PHY. This needs to specify + USB2 PHY instead of USB3 HS-PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb2-phy + - socionext,uniphier-ld11-usb2-phy + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^phy@[0-9]+$": + type: object + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 3 + description: + The ID number for the PHY + + "#phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node. + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + usb-controller { + compatible = "socionext,uniphier-ld11-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml new file mode 100644 index 000000000..6fa5caab1 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 High-Speed (HS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about High-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro5-usb3-hsphy + - socionext,uniphier-pxs2-usb3-hsphy + - socionext,uniphier-ld20-usb3-hsphy + - socionext,uniphier-pxs3-usb3-hsphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - const: link # for PXs2 + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + items: + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + + nvmem-cells: + maxItems: 3 + description: + Phandles to nvmem cell that contains the trimming data. + Available only for HS-PHY implemented on LD20 and PXs3, and + if unspecified, default value is used. + + nvmem-cell-names: + items: + - const: rterm + - const: sel_t + - const: hs_i + description: + Should be the following names, which correspond to each nvmem-cells. + All of the 3 parameters associated with the above names are + required for each port, if any one is omitted, the trimming data + of the port will not be set at all. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + nvmem-cell-names = "rterm", "sel_t", "hs_i"; + nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml new file mode 100644 index 000000000..9d46715ed --- /dev/null +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier USB3 Super-Speed (SS) PHY + +description: | + This describes the devicetree bindings for PHY interfaces built into + USB3 controller implemented on Socionext UniPhier SoCs. + Although the controller includes High-Speed PHY and Super-Speed PHY, + this describes about Super-Speed PHY. + +maintainers: + - Kunihiko Hayashi + +properties: + compatible: + enum: + - socionext,uniphier-pro4-usb3-ssphy + - socionext,uniphier-pro5-usb3-ssphy + - socionext,uniphier-pxs2-usb3-ssphy + - socionext,uniphier-ld20-usb3-ssphy + - socionext,uniphier-pxs3-usb3-ssphy + + reg: + description: PHY register region (offset and length) + + "#phy-cells": + const: 0 + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + oneOf: + - items: # for Pro4, Pro5 + - const: gio + - const: link + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others + - const: link + - const: phy + + resets: + maxItems: 2 + + reset-names: + oneOf: + - items: # for Pro4,Pro5 + - const: gio + - const: link + - items: # for others + - const: link + - const: phy + + vbus-supply: + description: A phandle to the regulator for USB VBUS + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - resets + - reset-names + - vbus-supply + +additionalProperties: false + +examples: + - | + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb_vbus0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/st-spear-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt new file mode 100644 index 000000000..2a6bfdcc0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt @@ -0,0 +1,15 @@ +ST SPEAr miphy DT details +========================= + +ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. + +Optional properties: +- phy-id: Instance id of the phy. Only required when there are multiple phys + present on a implementation. diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml new file mode 100644 index 000000000..83d5d0ace --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OMAP USB2 PHY + +maintainers: + - Kishon Vijay Abraham I + - Roger Quadros + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,dra7x-usb2 + - ti,dra7x-usb2-phy2 + - ti,am654-usb2 + - enum: + - ti,omap-usb2 + - items: + - const: ti,am437x-usb2 + - items: + - const: ti,omap-usb2 + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + minItems: 1 + items: + - description: wakeup clock + - description: reference clock + + clock-names: + minItems: 1 + items: + - const: wkupclk + - const: refclk + + syscon-phy-power: + $ref: /schemas/types.yaml#definitions/phandle-array + description: + phandle/offset pair. Phandle to the system control module and + register offset to power on/off the PHY. + + ctrl-module: + $ref: /schemas/types.yaml#definitions/phandle + description: + (deprecated) phandle of the control module used by PHY driver + to power on the PHY. Use syscon-phy-power instead. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + usb0_phy: phy@4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x4100000 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt new file mode 100644 index 000000000..64b286d2d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.txt @@ -0,0 +1,82 @@ +TI AM654 SERDES + +Required properties: + - compatible: Should be "ti,phy-am654-serdes" + - reg : Address and length of the register set for the device. + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. Should be "2". The 1st cell + corresponds to the phy type (should be one of the types specified in + include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes + lane function. + If SERDES0 is referenced 2nd cell should be: + 0 - USB3 + 1 - PCIe0 Lane0 + 2 - ICSS2 SGMII Lane0 + If SERDES1 is referenced 2nd cell should be: + 0 - PCIe1 Lane0 + 1 - PCIe0 Lane1 + 2 - ICSS2 SGMII Lane1 + - power-domains: As documented by the generic PM domain bindings in + Documentation/devicetree/bindings/power/power_domain.txt. + - clocks: List of clock-specifiers representing the input to the SERDES. + Should have 3 items representing the left input clock, external + reference clock and right input clock in that order. + - clock-output-names: List of clock names for each of the clock outputs of + SERDES. Should have 3 items for CMU reference clock, + left output clock and right output clock in that order. + - assigned-clocks: As defined in + Documentation/devicetree/bindings/clock/clock-bindings.txt + - assigned-clock-parents: As defined in + Documentation/devicetree/bindings/clock/clock-bindings.txt + - #clock-cells: Should be <1> to choose between the 3 output clocks. + Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt + + The following macros are defined in dt-bindings/phy/phy-am654-serdes.h + for selecting the correct reference clock. This can be used while + specifying the clocks created by SERDES. + => AM654_SERDES_CMU_REFCLK + => AM654_SERDES_LO_REFCLK + => AM654_SERDES_RO_REFCLK + + - mux-controls: Phandle to the multiplexer that is used to select the lane + function. See #phy-cells above to see the multiplex values. + +Example: + +Example for SERDES0 is given below. It has 3 clock inputs; +left input reference clock as indicated by <&k3_clks 153 4>, external +reference clock as indicated by <&k3_clks 153 1> and right input +reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The +right input of SERDES0 is connected to the left output of SERDES1). + +SERDES0 registers 3 clock outputs as indicated in clock-output-names. The +first refers to the CMU reference clock, second refers to the left output +reference clock and the third refers to the right output reference clock. + +The assigned-clocks and assigned-clock-parents is used here to set the +parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of +CMU reference clock to left input reference clock. + +serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, + <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", + "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + mux-controls = <&serdes_mux 0>; + #clock-cells = <1>; +}; + +Example for PCIe consumer node using the SERDES PHY specifier is given below. +&pcie0_rc { + num-lanes = <2>; + phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>; + phy-names = "pcie-phy0", "pcie-phy1"; +}; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml new file mode 100644 index 000000000..bcec422d7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: CPSW Port's Interface Mode Selection PHY Tree Bindings + +maintainers: + - Kishon Vijay Abraham I + +description: | + TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports + two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. + The interface mode is selected by configuring the MII mode selection register(s) + (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and + bit fields placement in SCM are different between SoCs while fields meaning + is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + + CPSW Port's Interface Mode Selection PHY describes MII interface mode between + CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + | + CPSW Port's Interface Mode Selection PHY device should defined as child device + of SCM node (scm_conf) and can be attached to each CPSW port node using standard + PHY bindings. + +properties: + compatible: + enum: + - ti,am3352-phy-gmii-sel + - ti,dra7xx-phy-gmii-sel + - ti,am43xx-phy-gmii-sel + - ti,dm814-phy-gmii-sel + - ti,am654-phy-gmii-sel + + reg: + description: Address and length of the register set for the device + + '#phy-cells': true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,dra7xx-phy-gmii-sel + - ti,dm814-phy-gmii-sel + - ti,am654-phy-gmii-sel + then: + properties: + '#phy-cells': + const: 1 + description: CPSW port number (starting from 1) + - if: + properties: + compatible: + contains: + enum: + - ti,am3352-phy-gmii-sel + - ti,am43xx-phy-gmii-sel + then: + properties: + '#phy-cells': + const: 2 + description: | + - CPSW port number (starting from 1) + - RMII refclk mode + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + phy_gmii_sel: phy-gmii-sel@650 { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml new file mode 100644 index 000000000..c33e9bc79 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -0,0 +1,231 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E WIZ (SERDES Wrapper) + +maintainers: + - Kishon Vijay Abraham I + +properties: + compatible: + enum: + - ti,j721e-wiz-16g + - ti,j721e-wiz-10g + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + description: clock-specifier to represent input to the WIZ + + clock-names: + items: + - const: fck + - const: core_ref_clk + - const: ext_ref_clk + + num-lanes: + minimum: 1 + maximum: 4 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#reset-cells": + const: 1 + + ranges: true + + assigned-clocks: + minItems: 1 + maxItems: 2 + + assigned-clock-parents: + minItems: 1 + maxItems: 2 + + assigned-clock-rates: + minItems: 1 + maxItems: 2 + + typec-dir-gpios: + maxItems: 1 + description: + GPIO to signal Type-C cable orientation for lane swap. + If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to + achieve the funtionality of an external type-C plug flip mux. + + typec-dir-debounce-ms: + minimum: 100 + maximum: 1000 + default: 100 + description: + Number of milliseconds to wait before sampling typec-dir-gpio. + If not specified, the default debounce of 100ms will be used. + Type-C spec states minimum CC pin debounce of 100 ms and maximum + of 200 ms. However, some solutions might need more than 200 ms. + +patternProperties: + "^pll[0|1]-refclk$": + type: object + description: | + WIZ node should have subnodes for each of the PLLs present in + the SERDES. + properties: + clocks: + maxItems: 2 + description: Phandle to clock nodes representing the two inputs to PLL. + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^cmn-refclk1?-dig-div$": + type: object + description: + WIZ node should have subnodes for each of the PMA common refclock + provided by the SERDES. + properties: + clocks: + maxItems: 1 + description: Phandle to the clock node representing the input to the + divider clock. + + "#clock-cells": + const: 0 + + required: + - clocks + - "#clock-cells" + + "^refclk-dig$": + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + minItems: 2 + maxItems: 4 + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^serdes@[0-9a-f]+$": + type: object + description: | + WIZ node should have '1' subnode for the SERDES. It could be either + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the + bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Torrent SERDES should follow the bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml + +required: + - compatible + - power-domains + - clocks + - clock-names + - num-lanes + - "#address-cells" + - "#size-cells" + - "#reset-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include + + wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x5000000 0x10000>; + + pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + cmn-refclk-dig-div { + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + serdes@5000000 { + compatible = "cdns,ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt new file mode 100644 index 000000000..60c9d0ac7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -0,0 +1,98 @@ +TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs + +OMAP CONTROL PHY + +Required properties: + - compatible: Should be one of + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register + e.g. USB2_PHY on OMAP5. + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control + e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-pcie" - for pcie to support external clock for pcie and to + set PCS delay value. + e.g. PCIE PHY in DRA7x + "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on + DRA7 platform. + "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on + AM437 platform. + - reg : register ranges as listed in the reg-names property + - reg-names: "otghs_control" for control-phy-otghs + "power", "pcie_pcs" and "control_sma" for control-phy-pcie + "power" for all other types + +omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; +}; + +TI PIPE3 PHY + +Required properties: + - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or + "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated. + - reg : Address and length of the register set for the device. + - reg-names: The names of the register addresses corresponding to the registers + filled in "reg". + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "sysclk" - system clock. + * "refclk" - reference clock. + * "dpll_ref" - external dpll ref clk + * "dpll_ref_m2" - external dpll ref clk + * "phy-div" - divider for apll + * "div-clk" - apll clock + +Optional properties: + - id: If there are multiple instance of the same type, in order to + differentiate between each instance "id" can be used (e.g., multi-lane PCIe + PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. + - syscon-pcs : phandle/offset pair. Phandle to the system control module and the + register offset to write the PCS delay value. + +Deprecated properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +Recommended properies: + - syscon-phy-power : phandle/offset pair. Phandle to the system control + module and the register offset to power on/off the PHY. + +This is usually a subnode of ocp2scp to which it is connected. + +usb3phy@4a084400 { + compatible = "ti,phy-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; +}; + +sata_phy: phy@4a096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml new file mode 100644 index 000000000..04d5654ef --- /dev/null +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings + +maintainers: + - Laurent Pinchart + +description: | + This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The + GTR provides four lanes and is used by USB, SATA, PCIE, Display port and + Ethernet SGMII controllers. + +properties: + "#phy-cells": + const: 4 + description: | + The cells contain the following arguments. + + - description: The GTR lane + minimum: 0 + maximum: 3 + - description: The PHY type + enum: + - PHY_TYPE_DP + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + - PHY_TYPE_SGMII + - PHY_TYPE_USB + - description: The PHY instance + minimum: 0 + maximum: 1 # for DP, SATA or USB + maximum: 3 # for PCIE or SGMII + - description: The reference clock number + minimum: 0 + maximum: 3 + + compatible: + enum: + - xlnx,zynqmp-psgtr-v1.1 + - xlnx,zynqmp-psgtr + + clocks: + minItems: 1 + maxItems: 4 + description: | + Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected + inputs shall not have an entry. + + clock-names: + minItems: 1 + maxItems: 4 + items: + pattern: "^ref[0-3]$" + + reg: + items: + - description: SERDES registers block + - description: SIOU registers block + + reg-names: + items: + - const: serdes + - const: siou + + xlnx,tx-termination-fix: + description: | + Include this for fixing functional issue with the TX termination + resistance in GT, which can be out of spec for the XCZU9EG silicon + version. + type: boolean + +required: + - "#phy-cells" + - compatible + - reg + - reg-names + +if: + properties: + compatible: + const: xlnx,zynqmp-psgtr-v1.1 + +then: + properties: + xlnx,tx-termination-fix: false + +additionalProperties: false + +examples: + - | + phy: phy@fd400000 { + compatible = "xlnx,zynqmp-psgtr-v1.1"; + reg = <0xfd400000 0x40000>, + <0xfd3d0000 0x1000>; + reg-names = "serdes", "siou"; + clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>; + clock-names = "ref1", "ref2", "ref3"; + #phy-cells = <4>; + }; + +... -- cgit v1.2.3