From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/filesystems/ext4/ifork.rst | 194 +++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 Documentation/filesystems/ext4/ifork.rst (limited to 'Documentation/filesystems/ext4/ifork.rst') diff --git a/Documentation/filesystems/ext4/ifork.rst b/Documentation/filesystems/ext4/ifork.rst new file mode 100644 index 000000000..b9816d5a8 --- /dev/null +++ b/Documentation/filesystems/ext4/ifork.rst @@ -0,0 +1,194 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Contents of inode.i\_block +------------------------------ + +Depending on the type of file an inode describes, the 60 bytes of +storage in ``inode.i_block`` can be used in different ways. In general, +regular files and directories will use it for file block indexing +information, and special files will use it for special purposes. + +Symbolic Links +~~~~~~~~~~~~~~ + +The target of a symbolic link will be stored in this field if the target +string is less than 60 bytes long. Otherwise, either extents or block +maps will be used to allocate data blocks to store the link target. + +Direct/Indirect Block Addressing +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In ext2/3, file block numbers were mapped to logical block numbers by +means of an (up to) three level 1-1 block map. To find the logical block +that stores a particular file block, the code would navigate through +this increasingly complicated structure. Notice that there is neither a +magic number nor a checksum to provide any level of confidence that the +block isn't full of garbage. + +.. ifconfig:: builder != 'latex' + + .. include:: blockmap.rst + +.. ifconfig:: builder == 'latex' + + [Table omitted because LaTeX doesn't support nested tables.] + +Note that with this block mapping scheme, it is necessary to fill out a +lot of mapping data even for a large contiguous file! This inefficiency +led to the creation of the extent mapping scheme, discussed below. + +Notice also that a file using this mapping scheme cannot be placed +higher than 2^32 blocks. + +Extent Tree +~~~~~~~~~~~ + +In ext4, the file to logical block map has been replaced with an extent +tree. Under the old scheme, allocating a contiguous run of 1,000 blocks +requires an indirect block to map all 1,000 entries; with extents, the +mapping is reduced to a single ``struct ext4_extent`` with +``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate +very large files with a single extent, at a considerable reduction in +metadata block use, and some improvement in disk efficiency. The inode +must have the extents flag (0x80000) flag set for this feature to be in +use. + +Extents are arranged as a tree. Each node of the tree begins with a +``struct ext4_extent_header``. If the node is an interior node +(``eh.eh_depth`` > 0), the header is followed by ``eh.eh_entries`` +instances of ``struct ext4_extent_idx``; each of these index entries +points to a block containing more nodes in the extent tree. If the node +is a leaf node (``eh.eh_depth == 0``), then the header is followed by +``eh.eh_entries`` instances of ``struct ext4_extent``; these instances +point to the file's data blocks. The root node of the extent tree is +stored in ``inode.i_block``, which allows for the first four extents to +be recorded without the use of extra metadata blocks. + +The extent tree header is recorded in ``struct ext4_extent_header``, +which is 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - eh\_magic + - Magic number, 0xF30A. + * - 0x2 + - \_\_le16 + - eh\_entries + - Number of valid entries following the header. + * - 0x4 + - \_\_le16 + - eh\_max + - Maximum number of entries that could follow the header. + * - 0x6 + - \_\_le16 + - eh\_depth + - Depth of this extent node in the extent tree. 0 = this extent node + points to data blocks; otherwise, this extent node points to other + extent nodes. The extent tree can be at most 5 levels deep: a logical + block number can be at most ``2^32``, and the smallest ``n`` that + satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5. + * - 0x8 + - \_\_le32 + - eh\_generation + - Generation of the tree. (Used by Lustre, but not standard ext4). + +Internal nodes of the extent tree, also known as index nodes, are +recorded as ``struct ext4_extent_idx``, and are 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - ei\_block + - This index node covers file blocks from 'block' onward. + * - 0x4 + - \_\_le32 + - ei\_leaf\_lo + - Lower 32-bits of the block number of the extent node that is the next + level lower in the tree. The tree node pointed to can be either another + internal node or a leaf node, described below. + * - 0x8 + - \_\_le16 + - ei\_leaf\_hi + - Upper 16-bits of the previous field. + * - 0xA + - \_\_u16 + - ei\_unused + - + +Leaf nodes of the extent tree are recorded as ``struct ext4_extent``, +and are also 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - ee\_block + - First file block number that this extent covers. + * - 0x4 + - \_\_le16 + - ee\_len + - Number of blocks covered by extent. If the value of this field is <= + 32768, the extent is initialized. If the value of the field is > 32768, + the extent is uninitialized and the actual extent length is ``ee_len`` - + 32768. Therefore, the maximum length of a initialized extent is 32768 + blocks, and the maximum length of an uninitialized extent is 32767. + * - 0x6 + - \_\_le16 + - ee\_start\_hi + - Upper 16-bits of the block number to which this extent points. + * - 0x8 + - \_\_le32 + - ee\_start\_lo + - Lower 32-bits of the block number to which this extent points. + +Prior to the introduction of metadata checksums, the extent header + +extent entries always left at least 4 bytes of unallocated space at the +end of each extent tree data block (because (2^x % 12) >= 4). Therefore, +the 32-bit checksum is inserted into this space. The 4 extents in the +inode do not need checksumming, since the inode is already checksummed. +The checksum is calculated against the FS UUID, the inode number, the +inode generation, and the entire extent block leading up to (but not +including) the checksum itself. + +``struct ext4_extent_tail`` is 4 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - eb\_checksum + - Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock) + +Inline Data +~~~~~~~~~~~ + +If the inline data feature is enabled for the filesystem and the flag is +set for the inode, it is possible that the first 60 bytes of the file +data are stored here. -- cgit v1.2.3