From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/hwmon/asb100.rst | 73 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/hwmon/asb100.rst (limited to 'Documentation/hwmon/asb100.rst') diff --git a/Documentation/hwmon/asb100.rst b/Documentation/hwmon/asb100.rst new file mode 100644 index 000000000..c2d5f9708 --- /dev/null +++ b/Documentation/hwmon/asb100.rst @@ -0,0 +1,73 @@ +Kernel driver asb100 +==================== + +Supported Chips: + + * Asus ASB100 and ASB100-A "Bach" + + Prefix: 'asb100' + + Addresses scanned: I2C 0x2d + + Datasheet: none released + +Author: Mark M. Hoffman + +Description +----------- + +This driver implements support for the Asus ASB100 and ASB100-A "Bach". +These are custom ASICs available only on Asus mainboards. Asus refuses to +supply a datasheet for these chips. Thanks go to many people who helped +investigate their hardware, including: + +Vitaly V. Bursov +Alexander van Kaam (author of MBM for Windows) +Bertrik Sikken + +The ASB100 implements seven voltage sensors, three fan rotation speed +sensors, four temperature sensors, VID lines and alarms. In addition to +these, the ASB100-A also implements a single PWM controller for fans 2 and +3 (i.e. one setting controls both.) If you have a plain ASB100, the PWM +controller will simply not work (or maybe it will for you... it doesn't for +me). + +Temperatures are measured and reported in degrees Celsius. + +Fan speeds are reported in RPM (rotations per minute). An alarm is +triggered if the rotation speed has dropped below a programmable limit. + +Voltage sensors (also known as IN sensors) report values in volts. + +The VID lines encode the core voltage value: the voltage level your +processor should work with. This is hardcoded by the mainboard and/or +processor itself. It is a value in volts. + +Alarms: (TODO question marks indicate may or may not work) + +- 0x0001 => in0 (?) +- 0x0002 => in1 (?) +- 0x0004 => in2 +- 0x0008 => in3 +- 0x0010 => temp1 [1]_ +- 0x0020 => temp2 +- 0x0040 => fan1 +- 0x0080 => fan2 +- 0x0100 => in4 +- 0x0200 => in5 (?) [2]_ +- 0x0400 => in6 (?) [2]_ +- 0x0800 => fan3 +- 0x1000 => chassis switch +- 0x2000 => temp3 + +.. [1] This alarm will only trigger if the hysteresis value is 127C. + I.e. it behaves the same as w83781d. + +.. [2] The min and max registers for these values appear to + be read-only or otherwise stuck at 0x00. + +TODO: + * Experiment with fan divisors > 8. + * Experiment with temp. sensor types. + * Are there really 13 voltage inputs? Probably not... + * Cleanups, no doubt... -- cgit v1.2.3