From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/power/swsusp.rst | 503 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 503 insertions(+) create mode 100644 Documentation/power/swsusp.rst (limited to 'Documentation/power/swsusp.rst') diff --git a/Documentation/power/swsusp.rst b/Documentation/power/swsusp.rst new file mode 100644 index 000000000..8524f079e --- /dev/null +++ b/Documentation/power/swsusp.rst @@ -0,0 +1,503 @@ +============ +Swap suspend +============ + +Some warnings, first. + +.. warning:: + + **BIG FAT WARNING** + + If you touch anything on disk between suspend and resume... + ...kiss your data goodbye. + + If you do resume from initrd after your filesystems are mounted... + ...bye bye root partition. + + [this is actually same case as above] + + If you have unsupported ( ) devices using DMA, you may have some + problems. If your disk driver does not support suspend... (IDE does), + it may cause some problems, too. If you change kernel command line + between suspend and resume, it may do something wrong. If you change + your hardware while system is suspended... well, it was not good idea; + but it will probably only crash. + + ( ) suspend/resume support is needed to make it safe. + + If you have any filesystems on USB devices mounted before software suspend, + they won't be accessible after resume and you may lose data, as though + you have unplugged the USB devices with mounted filesystems on them; + see the FAQ below for details. (This is not true for more traditional + power states like "standby", which normally don't turn USB off.) + +Swap partition: + You need to append resume=/dev/your_swap_partition to kernel command + line or specify it using /sys/power/resume. + +Swap file: + If using a swapfile you can also specify a resume offset using + resume_offset= on the kernel command line or specify it + in /sys/power/resume_offset. + +After preparing then you suspend by:: + + echo shutdown > /sys/power/disk; echo disk > /sys/power/state + +- If you feel ACPI works pretty well on your system, you might try:: + + echo platform > /sys/power/disk; echo disk > /sys/power/state + +- If you would like to write hibernation image to swap and then suspend + to RAM (provided your platform supports it), you can try:: + + echo suspend > /sys/power/disk; echo disk > /sys/power/state + +- If you have SATA disks, you'll need recent kernels with SATA suspend + support. For suspend and resume to work, make sure your disk drivers + are built into kernel -- not modules. [There's way to make + suspend/resume with modular disk drivers, see FAQ, but you probably + should not do that.] + +If you want to limit the suspend image size to N bytes, do:: + + echo N > /sys/power/image_size + +before suspend (it is limited to around 2/5 of available RAM by default). + +- The resume process checks for the presence of the resume device, + if found, it then checks the contents for the hibernation image signature. + If both are found, it resumes the hibernation image. + +- The resume process may be triggered in two ways: + + 1) During lateinit: If resume=/dev/your_swap_partition is specified on + the kernel command line, lateinit runs the resume process. If the + resume device has not been probed yet, the resume process fails and + bootup continues. + 2) Manually from an initrd or initramfs: May be run from + the init script by using the /sys/power/resume file. It is vital + that this be done prior to remounting any filesystems (even as + read-only) otherwise data may be corrupted. + +Article about goals and implementation of Software Suspend for Linux +==================================================================== + +Author: Gábor Kuti +Last revised: 2003-10-20 by Pavel Machek + +Idea and goals to achieve +------------------------- + +Nowadays it is common in several laptops that they have a suspend button. It +saves the state of the machine to a filesystem or to a partition and switches +to standby mode. Later resuming the machine the saved state is loaded back to +ram and the machine can continue its work. It has two real benefits. First we +save ourselves the time machine goes down and later boots up, energy costs +are real high when running from batteries. The other gain is that we don't have +to interrupt our programs so processes that are calculating something for a long +time shouldn't need to be written interruptible. + +swsusp saves the state of the machine into active swaps and then reboots or +powerdowns. You must explicitly specify the swap partition to resume from with +`resume=` kernel option. If signature is found it loads and restores saved +state. If the option `noresume` is specified as a boot parameter, it skips +the resuming. If the option `hibernate=nocompress` is specified as a boot +parameter, it saves hibernation image without compression. + +In the meantime while the system is suspended you should not add/remove any +of the hardware, write to the filesystems, etc. + +Sleep states summary +==================== + +There are three different interfaces you can use, /proc/acpi should +work like this: + +In a really perfect world:: + + echo 1 > /proc/acpi/sleep # for standby + echo 2 > /proc/acpi/sleep # for suspend to ram + echo 3 > /proc/acpi/sleep # for suspend to ram, but with more power + # conservative + echo 4 > /proc/acpi/sleep # for suspend to disk + echo 5 > /proc/acpi/sleep # for shutdown unfriendly the system + +and perhaps:: + + echo 4b > /proc/acpi/sleep # for suspend to disk via s4bios + +Frequently Asked Questions +========================== + +Q: + well, suspending a server is IMHO a really stupid thing, + but... (Diego Zuccato): + +A: + You bought new UPS for your server. How do you install it without + bringing machine down? Suspend to disk, rearrange power cables, + resume. + + You have your server on UPS. Power died, and UPS is indicating 30 + seconds to failure. What do you do? Suspend to disk. + + +Q: + Maybe I'm missing something, but why don't the regular I/O paths work? + +A: + We do use the regular I/O paths. However we cannot restore the data + to its original location as we load it. That would create an + inconsistent kernel state which would certainly result in an oops. + Instead, we load the image into unused memory and then atomically copy + it back to it original location. This implies, of course, a maximum + image size of half the amount of memory. + + There are two solutions to this: + + * require half of memory to be free during suspend. That way you can + read "new" data onto free spots, then cli and copy + + * assume we had special "polling" ide driver that only uses memory + between 0-640KB. That way, I'd have to make sure that 0-640KB is free + during suspending, but otherwise it would work... + + suspend2 shares this fundamental limitation, but does not include user + data and disk caches into "used memory" by saving them in + advance. That means that the limitation goes away in practice. + +Q: + Does linux support ACPI S4? + +A: + Yes. That's what echo platform > /sys/power/disk does. + +Q: + What is 'suspend2'? + +A: + suspend2 is 'Software Suspend 2', a forked implementation of + suspend-to-disk which is available as separate patches for 2.4 and 2.6 + kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB + highmem and preemption. It also has a extensible architecture that + allows for arbitrary transformations on the image (compression, + encryption) and arbitrary backends for writing the image (eg to swap + or an NFS share[Work In Progress]). Questions regarding suspend2 + should be sent to the mailing list available through the suspend2 + website, and not to the Linux Kernel Mailing List. We are working + toward merging suspend2 into the mainline kernel. + +Q: + What is the freezing of tasks and why are we using it? + +A: + The freezing of tasks is a mechanism by which user space processes and some + kernel threads are controlled during hibernation or system-wide suspend (on + some architectures). See freezing-of-tasks.txt for details. + +Q: + What is the difference between "platform" and "shutdown"? + +A: + shutdown: + save state in linux, then tell bios to powerdown + + platform: + save state in linux, then tell bios to powerdown and blink + "suspended led" + + "platform" is actually right thing to do where supported, but + "shutdown" is most reliable (except on ACPI systems). + +Q: + I do not understand why you have such strong objections to idea of + selective suspend. + +A: + Do selective suspend during runtime power management, that's okay. But + it's useless for suspend-to-disk. (And I do not see how you could use + it for suspend-to-ram, I hope you do not want that). + + Lets see, so you suggest to + + * SUSPEND all but swap device and parents + * Snapshot + * Write image to disk + * SUSPEND swap device and parents + * Powerdown + + Oh no, that does not work, if swap device or its parents uses DMA, + you've corrupted data. You'd have to do + + * SUSPEND all but swap device and parents + * FREEZE swap device and parents + * Snapshot + * UNFREEZE swap device and parents + * Write + * SUSPEND swap device and parents + + Which means that you still need that FREEZE state, and you get more + complicated code. (And I have not yet introduce details like system + devices). + +Q: + There don't seem to be any generally useful behavioral + distinctions between SUSPEND and FREEZE. + +A: + Doing SUSPEND when you are asked to do FREEZE is always correct, + but it may be unnecessarily slow. If you want your driver to stay simple, + slowness may not matter to you. It can always be fixed later. + + For devices like disk it does matter, you do not want to spindown for + FREEZE. + +Q: + After resuming, system is paging heavily, leading to very bad interactivity. + +A: + Try running:: + + cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file + do + test -f "$file" && cat "$file" > /dev/null + done + + after resume. swapoff -a; swapon -a may also be useful. + +Q: + What happens to devices during swsusp? They seem to be resumed + during system suspend? + +A: + That's correct. We need to resume them if we want to write image to + disk. Whole sequence goes like + + **Suspend part** + + running system, user asks for suspend-to-disk + + user processes are stopped + + suspend(PMSG_FREEZE): devices are frozen so that they don't interfere + with state snapshot + + state snapshot: copy of whole used memory is taken with interrupts + disabled + + resume(): devices are woken up so that we can write image to swap + + write image to swap + + suspend(PMSG_SUSPEND): suspend devices so that we can power off + + turn the power off + + **Resume part** + + (is actually pretty similar) + + running system, user asks for suspend-to-disk + + user processes are stopped (in common case there are none, + but with resume-from-initrd, no one knows) + + read image from disk + + suspend(PMSG_FREEZE): devices are frozen so that they don't interfere + with image restoration + + image restoration: rewrite memory with image + + resume(): devices are woken up so that system can continue + + thaw all user processes + +Q: + What is this 'Encrypt suspend image' for? + +A: + First of all: it is not a replacement for dm-crypt encrypted swap. + It cannot protect your computer while it is suspended. Instead it does + protect from leaking sensitive data after resume from suspend. + + Think of the following: you suspend while an application is running + that keeps sensitive data in memory. The application itself prevents + the data from being swapped out. Suspend, however, must write these + data to swap to be able to resume later on. Without suspend encryption + your sensitive data are then stored in plaintext on disk. This means + that after resume your sensitive data are accessible to all + applications having direct access to the swap device which was used + for suspend. If you don't need swap after resume these data can remain + on disk virtually forever. Thus it can happen that your system gets + broken in weeks later and sensitive data which you thought were + encrypted and protected are retrieved and stolen from the swap device. + To prevent this situation you should use 'Encrypt suspend image'. + + During suspend a temporary key is created and this key is used to + encrypt the data written to disk. When, during resume, the data was + read back into memory the temporary key is destroyed which simply + means that all data written to disk during suspend are then + inaccessible so they can't be stolen later on. The only thing that + you must then take care of is that you call 'mkswap' for the swap + partition used for suspend as early as possible during regular + boot. This asserts that any temporary key from an oopsed suspend or + from a failed or aborted resume is erased from the swap device. + + As a rule of thumb use encrypted swap to protect your data while your + system is shut down or suspended. Additionally use the encrypted + suspend image to prevent sensitive data from being stolen after + resume. + +Q: + Can I suspend to a swap file? + +A: + Generally, yes, you can. However, it requires you to use the "resume=" and + "resume_offset=" kernel command line parameters, so the resume from a swap + file cannot be initiated from an initrd or initramfs image. See + swsusp-and-swap-files.txt for details. + +Q: + Is there a maximum system RAM size that is supported by swsusp? + +A: + It should work okay with highmem. + +Q: + Does swsusp (to disk) use only one swap partition or can it use + multiple swap partitions (aggregate them into one logical space)? + +A: + Only one swap partition, sorry. + +Q: + If my application(s) causes lots of memory & swap space to be used + (over half of the total system RAM), is it correct that it is likely + to be useless to try to suspend to disk while that app is running? + +A: + No, it should work okay, as long as your app does not mlock() + it. Just prepare big enough swap partition. + +Q: + What information is useful for debugging suspend-to-disk problems? + +A: + Well, last messages on the screen are always useful. If something + is broken, it is usually some kernel driver, therefore trying with as + little as possible modules loaded helps a lot. I also prefer people to + suspend from console, preferably without X running. Booting with + init=/bin/bash, then swapon and starting suspend sequence manually + usually does the trick. Then it is good idea to try with latest + vanilla kernel. + +Q: + How can distributions ship a swsusp-supporting kernel with modular + disk drivers (especially SATA)? + +A: + Well, it can be done, load the drivers, then do echo into + /sys/power/resume file from initrd. Be sure not to mount + anything, not even read-only mount, or you are going to lose your + data. + +Q: + How do I make suspend more verbose? + +A: + If you want to see any non-error kernel messages on the virtual + terminal the kernel switches to during suspend, you have to set the + kernel console loglevel to at least 4 (KERN_WARNING), for example by + doing:: + + # save the old loglevel + read LOGLEVEL DUMMY < /proc/sys/kernel/printk + # set the loglevel so we see the progress bar. + # if the level is higher than needed, we leave it alone. + if [ $LOGLEVEL -lt 5 ]; then + echo 5 > /proc/sys/kernel/printk + fi + + IMG_SZ=0 + read IMG_SZ < /sys/power/image_size + echo -n disk > /sys/power/state + RET=$? + # + # the logic here is: + # if image_size > 0 (without kernel support, IMG_SZ will be zero), + # then try again with image_size set to zero. + if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size + echo 0 > /sys/power/image_size + echo -n disk > /sys/power/state + RET=$? + fi + + # restore previous loglevel + echo $LOGLEVEL > /proc/sys/kernel/printk + exit $RET + +Q: + Is this true that if I have a mounted filesystem on a USB device and + I suspend to disk, I can lose data unless the filesystem has been mounted + with "sync"? + +A: + That's right ... if you disconnect that device, you may lose data. + In fact, even with "-o sync" you can lose data if your programs have + information in buffers they haven't written out to a disk you disconnect, + or if you disconnect before the device finished saving data you wrote. + + Software suspend normally powers down USB controllers, which is equivalent + to disconnecting all USB devices attached to your system. + + Your system might well support low-power modes for its USB controllers + while the system is asleep, maintaining the connection, using true sleep + modes like "suspend-to-RAM" or "standby". (Don't write "disk" to the + /sys/power/state file; write "standby" or "mem".) We've not seen any + hardware that can use these modes through software suspend, although in + theory some systems might support "platform" modes that won't break the + USB connections. + + Remember that it's always a bad idea to unplug a disk drive containing a + mounted filesystem. That's true even when your system is asleep! The + safest thing is to unmount all filesystems on removable media (such USB, + Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays) + before suspending; then remount them after resuming. + + There is a work-around for this problem. For more information, see + Documentation/driver-api/usb/persist.rst. + +Q: + Can I suspend-to-disk using a swap partition under LVM? + +A: + Yes and No. You can suspend successfully, but the kernel will not be able + to resume on its own. You need an initramfs that can recognize the resume + situation, activate the logical volume containing the swap volume (but not + touch any filesystems!), and eventually call:: + + echo -n "$major:$minor" > /sys/power/resume + + where $major and $minor are the respective major and minor device numbers of + the swap volume. + + uswsusp works with LVM, too. See http://suspend.sourceforge.net/ + +Q: + I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were + compiled with the similar configuration files. Anyway I found that + suspend to disk (and resume) is much slower on 2.6.16 compared to + 2.6.15. Any idea for why that might happen or how can I speed it up? + +A: + This is because the size of the suspend image is now greater than + for 2.6.15 (by saving more data we can get more responsive system + after resume). + + There's the /sys/power/image_size knob that controls the size of the + image. If you set it to 0 (eg. by echo 0 > /sys/power/image_size as + root), the 2.6.15 behavior should be restored. If it is still too + slow, take a look at suspend.sf.net -- userland suspend is faster and + supports LZF compression to speed it up further. -- cgit v1.2.3