From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/trace/coresight/coresight.rst | 596 ++++++++++++++++++++++++++++ 1 file changed, 596 insertions(+) create mode 100644 Documentation/trace/coresight/coresight.rst (limited to 'Documentation/trace/coresight/coresight.rst') diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst new file mode 100644 index 000000000..0b73acb44 --- /dev/null +++ b/Documentation/trace/coresight/coresight.rst @@ -0,0 +1,596 @@ +====================================== +Coresight - HW Assisted Tracing on ARM +====================================== + + :Author: Mathieu Poirier + :Date: September 11th, 2014 + +Introduction +------------ + +Coresight is an umbrella of technologies allowing for the debugging of ARM +based SoC. It includes solutions for JTAG and HW assisted tracing. This +document is concerned with the latter. + +HW assisted tracing is becoming increasingly useful when dealing with systems +that have many SoCs and other components like GPU and DMA engines. ARM has +developed a HW assisted tracing solution by means of different components, each +being added to a design at synthesis time to cater to specific tracing needs. +Components are generally categorised as source, link and sinks and are +(usually) discovered using the AMBA bus. + +"Sources" generate a compressed stream representing the processor instruction +path based on tracing scenarios as configured by users. From there the stream +flows through the coresight system (via ATB bus) using links that are connecting +the emanating source to a sink(s). Sinks serve as endpoints to the coresight +implementation, either storing the compressed stream in a memory buffer or +creating an interface to the outside world where data can be transferred to a +host without fear of filling up the onboard coresight memory buffer. + +At typical coresight system would look like this:: + + ***************************************************************** + **************************** AMBA AXI ****************************===|| + ***************************************************************** || + ^ ^ | || + | | * ** + 0000000 ::::: 0000000 ::::: ::::: @@@@@@@ |||||||||||| + 0 CPU 0<-->: C : 0 CPU 0<-->: C : : C : @ STM @ || System || + |->0000000 : T : |->0000000 : T : : T :<--->@@@@@ || Memory || + | #######<-->: I : | #######<-->: I : : I : @@@<-| |||||||||||| + | # ETM # ::::: | # PTM # ::::: ::::: @ | + | ##### ^ ^ | ##### ^ ! ^ ! . | ||||||||| + | |->### | ! | |->### | ! | ! . | || DAP || + | | # | ! | | # | ! | ! . | ||||||||| + | | . | ! | | . | ! | ! . | | | + | | . | ! | | . | ! | ! . | | * + | | . | ! | | . | ! | ! . | | SWD/ + | | . | ! | | . | ! | ! . | | JTAG + *****************************************************************<-| + *************************** AMBA Debug APB ************************ + ***************************************************************** + | . ! . ! ! . | + | . * . * * . | + ***************************************************************** + ******************** Cross Trigger Matrix (CTM) ******************* + ***************************************************************** + | . ^ . . | + | * ! * * | + ***************************************************************** + ****************** AMBA Advanced Trace Bus (ATB) ****************** + ***************************************************************** + | ! =============== | + | * ===== F =====<---------| + | ::::::::: ==== U ==== + |-->:: CTI ::&& ETB &&<......II I ======= + | ! &&&&&&&&& II I . + | ! I I . + | ! I REP I<.......... + | ! I I + | !!>&&&&&&&&& II I *Source: ARM ltd. + |------>& TPIU &<......II I DAP = Debug Access Port + &&&&&&&&& IIIIIII ETM = Embedded Trace Macrocell + ; PTM = Program Trace Macrocell + ; CTI = Cross Trigger Interface + * ETB = Embedded Trace Buffer + To trace port TPIU= Trace Port Interface Unit + SWD = Serial Wire Debug + +While on target configuration of the components is done via the APB bus, +all trace data are carried out-of-band on the ATB bus. The CTM provides +a way to aggregate and distribute signals between CoreSight components. + +The coresight framework provides a central point to represent, configure and +manage coresight devices on a platform. This first implementation centers on +the basic tracing functionality, enabling components such ETM/PTM, funnel, +replicator, TMC, TPIU and ETB. Future work will enable more +intricate IP blocks such as STM and CTI. + + +Acronyms and Classification +--------------------------- + +Acronyms: + +PTM: + Program Trace Macrocell +ETM: + Embedded Trace Macrocell +STM: + System trace Macrocell +ETB: + Embedded Trace Buffer +ITM: + Instrumentation Trace Macrocell +TPIU: + Trace Port Interface Unit +TMC-ETR: + Trace Memory Controller, configured as Embedded Trace Router +TMC-ETF: + Trace Memory Controller, configured as Embedded Trace FIFO +CTI: + Cross Trigger Interface + +Classification: + +Source: + ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM +Link: + Funnel, replicator (intelligent or not), TMC-ETR +Sinks: + ETBv1.0, ETB1.1, TPIU, TMC-ETF +Misc: + CTI + + +Device Tree Bindings +-------------------- + +See Documentation/devicetree/bindings/arm/coresight.txt for details. + +As of this writing drivers for ITM, STMs and CTIs are not provided but are +expected to be added as the solution matures. + + +Framework and implementation +---------------------------- + +The coresight framework provides a central point to represent, configure and +manage coresight devices on a platform. Any coresight compliant device can +register with the framework for as long as they use the right APIs: + +.. c:function:: struct coresight_device *coresight_register(struct coresight_desc *desc); +.. c:function:: void coresight_unregister(struct coresight_device *csdev); + +The registering function is taking a ``struct coresight_desc *desc`` and +register the device with the core framework. The unregister function takes +a reference to a ``struct coresight_device *csdev`` obtained at registration time. + +If everything goes well during the registration process the new devices will +show up under /sys/bus/coresight/devices, as showns here for a TC2 platform:: + + root:~# ls /sys/bus/coresight/devices/ + replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm + 20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm + root:~# + +The functions take a ``struct coresight_device``, which looks like this:: + + struct coresight_desc { + enum coresight_dev_type type; + struct coresight_dev_subtype subtype; + const struct coresight_ops *ops; + struct coresight_platform_data *pdata; + struct device *dev; + const struct attribute_group **groups; + }; + + +The "coresight_dev_type" identifies what the device is, i.e, source link or +sink while the "coresight_dev_subtype" will characterise that type further. + +The ``struct coresight_ops`` is mandatory and will tell the framework how to +perform base operations related to the components, each component having +a different set of requirement. For that ``struct coresight_ops_sink``, +``struct coresight_ops_link`` and ``struct coresight_ops_source`` have been +provided. + +The next field ``struct coresight_platform_data *pdata`` is acquired by calling +``of_get_coresight_platform_data()``, as part of the driver's _probe routine and +``struct device *dev`` gets the device reference embedded in the ``amba_device``:: + + static int etm_probe(struct amba_device *adev, const struct amba_id *id) + { + ... + ... + drvdata->dev = &adev->dev; + ... + } + +Specific class of device (source, link, or sink) have generic operations +that can be performed on them (see ``struct coresight_ops``). The ``**groups`` +is a list of sysfs entries pertaining to operations +specific to that component only. "Implementation defined" customisations are +expected to be accessed and controlled using those entries. + +Device Naming scheme +-------------------- + +The devices that appear on the "coresight" bus were named the same as their +parent devices, i.e, the real devices that appears on AMBA bus or the platform bus. +Thus the names were based on the Linux Open Firmware layer naming convention, +which follows the base physical address of the device followed by the device +type. e.g:: + + root:~# ls /sys/bus/coresight/devices/ + 20010000.etf 20040000.funnel 20100000.stm 22040000.etm + 22140000.etm 230c0000.funnel 23240000.etm 20030000.tpiu + 20070000.etr 20120000.replicator 220c0000.funnel + 23040000.etm 23140000.etm 23340000.etm + +However, with the introduction of ACPI support, the names of the real +devices are a bit cryptic and non-obvious. Thus, a new naming scheme was +introduced to use more generic names based on the type of the device. The +following rules apply:: + + 1) Devices that are bound to CPUs, are named based on the CPU logical + number. + + e.g, ETM bound to CPU0 is named "etm0" + + 2) All other devices follow a pattern, "N", where : + + - A prefix specific to the type of the device + N - a sequential number assigned based on the order + of probing. + + e.g, tmc_etf0, tmc_etr0, funnel0, funnel1 + +Thus, with the new scheme the devices could appear as :: + + root:~# ls /sys/bus/coresight/devices/ + etm0 etm1 etm2 etm3 etm4 etm5 funnel0 + funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0 + +Some of the examples below might refer to old naming scheme and some +to the newer scheme, to give a confirmation that what you see on your +system is not unexpected. One must use the "names" as they appear on +the system under specified locations. + +Topology Representation +----------------------- + +Each CoreSight component has a ``connections`` directory which will contain +links to other CoreSight components. This allows the user to explore the trace +topology and for larger systems, determine the most appropriate sink for a +given source. The connection information can also be used to establish +which CTI devices are connected to a given component. This directory contains a +``nr_links`` attribute detailing the number of links in the directory. + +For an ETM source, in this case ``etm0`` on a Juno platform, a typical +arrangement will be:: + + linaro-developer:~# ls - l /sys/bus/coresight/devices/etm0/connections + cti_cpu0 -> ../../../23020000.cti/cti_cpu0 + nr_links + out:0 -> ../../../230c0000.funnel/funnel2 + +Following the out port to ``funnel2``:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel2/connections + in:0 -> ../../../23040000.etm/etm0 + in:1 -> ../../../23140000.etm/etm3 + in:2 -> ../../../23240000.etm/etm4 + in:3 -> ../../../23340000.etm/etm5 + nr_links + out:0 -> ../../../20040000.funnel/funnel0 + +And again to ``funnel0``:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel0/connections + in:0 -> ../../../220c0000.funnel/funnel1 + in:1 -> ../../../230c0000.funnel/funnel2 + nr_links + out:0 -> ../../../20010000.etf/tmc_etf0 + +Finding the first sink ``tmc_etf0``. This can be used to collect data +as a sink, or as a link to propagate further along the chain:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etf0/connections + cti_sys0 -> ../../../20020000.cti/cti_sys0 + in:0 -> ../../../20040000.funnel/funnel0 + nr_links + out:0 -> ../../../20150000.funnel/funnel4 + +via ``funnel4``:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/funnel4/connections + in:0 -> ../../../20010000.etf/tmc_etf0 + in:1 -> ../../../20140000.etf/tmc_etf1 + nr_links + out:0 -> ../../../20120000.replicator/replicator0 + +and a ``replicator0``:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/replicator0/connections + in:0 -> ../../../20150000.funnel/funnel4 + nr_links + out:0 -> ../../../20030000.tpiu/tpiu0 + out:1 -> ../../../20070000.etr/tmc_etr0 + +Arriving at the final sink in the chain, ``tmc_etr0``:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/tmc_etr0/connections + cti_sys0 -> ../../../20020000.cti/cti_sys0 + in:0 -> ../../../20120000.replicator/replicator0 + nr_links + +As described below, when using sysfs it is sufficient to enable a sink and +a source for successful trace. The framework will correctly enable all +intermediate links as required. + +Note: ``cti_sys0`` appears in two of the connections lists above. +CTIs can connect to multiple devices and are arranged in a star topology +via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +Looking at this device we see 4 connections:: + + linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections + nr_links + stm0 -> ../../../20100000.stm/stm0 + tmc_etf0 -> ../../../20010000.etf/tmc_etf0 + tmc_etr0 -> ../../../20070000.etr/tmc_etr0 + tpiu0 -> ../../../20030000.tpiu/tpiu0 + + +How to use the tracer modules +----------------------------- + +There are two ways to use the Coresight framework: + +1. using the perf cmd line tools. +2. interacting directly with the Coresight devices using the sysFS interface. + +Preference is given to the former as using the sysFS interface +requires a deep understanding of the Coresight HW. The following sections +provide details on using both methods. + +1) Using the sysFS interface: + +Before trace collection can start, a coresight sink needs to be identified. +There is no limit on the amount of sinks (nor sources) that can be enabled at +any given moment. As a generic operation, all device pertaining to the sink +class will have an "active" entry in sysfs:: + + root:/sys/bus/coresight/devices# ls + replicator 20030000.tpiu 2201c000.ptm 2203c000.etm 2203e000.etm + 20010000.etb 20040000.funnel 2201d000.ptm 2203d000.etm + root:/sys/bus/coresight/devices# ls 20010000.etb + enable_sink status trigger_cntr + root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink + root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink + 1 + root:/sys/bus/coresight/devices# + +At boot time the current etm3x driver will configure the first address +comparator with "_stext" and "_etext", essentially tracing any instruction +that falls within that range. As such "enabling" a source will immediately +trigger a trace capture:: + + root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source + root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source + 1 + root:/sys/bus/coresight/devices# cat 20010000.etb/status + Depth: 0x2000 + Status: 0x1 + RAM read ptr: 0x0 + RAM wrt ptr: 0x19d3 <----- The write pointer is moving + Trigger cnt: 0x0 + Control: 0x1 + Flush status: 0x0 + Flush ctrl: 0x2001 + root:/sys/bus/coresight/devices# + +Trace collection is stopped the same way:: + + root:/sys/bus/coresight/devices# echo 0 > 2201c000.ptm/enable_source + root:/sys/bus/coresight/devices# + +The content of the ETB buffer can be harvested directly from /dev:: + + root:/sys/bus/coresight/devices# dd if=/dev/20010000.etb \ + of=~/cstrace.bin + 64+0 records in + 64+0 records out + 32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s + root:/sys/bus/coresight/devices# + +The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32. + +Following is a DS-5 output of an experimental loop that increments a variable up +to a certain value. The example is simple and yet provides a glimpse of the +wealth of possibilities that coresight provides. +:: + + Info Tracing enabled + Instruction 106378866 0x8026B53C E52DE004 false PUSH {lr} + Instruction 0 0x8026B540 E24DD00C false SUB sp,sp,#0xc + Instruction 0 0x8026B544 E3A03000 false MOV r3,#0 + Instruction 0 0x8026B548 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Timestamp Timestamp: 17106715833 + Instruction 319 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Instruction 9 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Instruction 7 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Instruction 10 0x8026B54C E59D3004 false LDR r3,[sp,#4] + Instruction 0 0x8026B550 E3530004 false CMP r3,#4 + Instruction 0 0x8026B554 E2833001 false ADD r3,r3,#1 + Instruction 0 0x8026B558 E58D3004 false STR r3,[sp,#4] + Instruction 0 0x8026B55C DAFFFFFA true BLE {pc}-0x10 ; 0x8026b54c + Instruction 6 0x8026B560 EE1D3F30 false MRC p15,#0x0,r3,c13,c0,#1 + Instruction 0 0x8026B564 E1A0100D false MOV r1,sp + Instruction 0 0x8026B568 E3C12D7F false BIC r2,r1,#0x1fc0 + Instruction 0 0x8026B56C E3C2203F false BIC r2,r2,#0x3f + Instruction 0 0x8026B570 E59D1004 false LDR r1,[sp,#4] + Instruction 0 0x8026B574 E59F0010 false LDR r0,[pc,#16] ; [0x8026B58C] = 0x80550368 + Instruction 0 0x8026B578 E592200C false LDR r2,[r2,#0xc] + Instruction 0 0x8026B57C E59221D0 false LDR r2,[r2,#0x1d0] + Instruction 0 0x8026B580 EB07A4CF true BL {pc}+0x1e9344 ; 0x804548c4 + Info Tracing enabled + Instruction 13570831 0x8026B584 E28DD00C false ADD sp,sp,#0xc + Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} + Timestamp Timestamp: 17107041535 + +2) Using perf framework: + +Coresight tracers are represented using the Perf framework's Performance +Monitoring Unit (PMU) abstraction. As such the perf framework takes charge of +controlling when tracing gets enabled based on when the process of interest is +scheduled. When configured in a system, Coresight PMUs will be listed when +queried by the perf command line tool: + + linaro@linaro-nano:~$ ./perf list pmu + + List of pre-defined events (to be used in -e): + + cs_etm// [Kernel PMU event] + + linaro@linaro-nano:~$ + +Regardless of the number of tracers available in a system (usually equal to the +amount of processor cores), the "cs_etm" PMU will be listed only once. + +A Coresight PMU works the same way as any other PMU, i.e the name of the PMU is +listed along with configuration options within forward slashes '/'. Since a +Coresight system will typically have more than one sink, the name of the sink to +work with needs to be specified as an event option. +On newer kernels the available sinks are listed in sysFS under +($SYSFS)/bus/event_source/devices/cs_etm/sinks/:: + + root@localhost:/sys/bus/event_source/devices/cs_etm/sinks# ls + tmc_etf0 tmc_etr0 tpiu0 + +On older kernels, this may need to be found from the list of coresight devices, +available under ($SYSFS)/bus/coresight/devices/:: + + root:~# ls /sys/bus/coresight/devices/ + etm0 etm1 etm2 etm3 etm4 etm5 funnel0 + funnel1 funnel2 replicator0 stm0 tmc_etf0 tmc_etr0 tpiu0 + root@linaro-nano:~# perf record -e cs_etm/@tmc_etr0/u --per-thread program + +As mentioned above in section "Device Naming scheme", the names of the devices could +look different from what is used in the example above. One must use the device names +as it appears under the sysFS. + +The syntax within the forward slashes '/' is important. The '@' character +tells the parser that a sink is about to be specified and that this is the sink +to use for the trace session. + +More information on the above and other example on how to use Coresight with +the perf tools can be found in the "HOWTO.md" file of the openCSD gitHub +repository [#third]_. + +2.1) AutoFDO analysis using the perf tools: + +perf can be used to record and analyze trace of programs. + +Execution can be recorded using 'perf record' with the cs_etm event, +specifying the name of the sink to record to, e.g:: + + perf record -e cs_etm/@tmc_etr0/u --per-thread + +The 'perf report' and 'perf script' commands can be used to analyze execution, +synthesizing instruction and branch events from the instruction trace. +'perf inject' can be used to replace the trace data with the synthesized events. +The --itrace option controls the type and frequency of synthesized events +(see perf documentation). + +Note that only 64-bit programs are currently supported - further work is +required to support instruction decode of 32-bit Arm programs. + + +Generating coverage files for Feedback Directed Optimization: AutoFDO +--------------------------------------------------------------------- + +'perf inject' accepts the --itrace option in which case tracing data is +removed and replaced with the synthesized events. e.g. +:: + + perf inject --itrace --strip -i perf.data -o perf.data.new + +Below is an example of using ARM ETM for autoFDO. It requires autofdo +(https://github.com/google/autofdo) and gcc version 5. The bubble +sort example is from the AutoFDO tutorial (https://gcc.gnu.org/wiki/AutoFDO/Tutorial). +:: + + $ gcc-5 -O3 sort.c -o sort + $ taskset -c 2 ./sort + Bubble sorting array of 30000 elements + 5910 ms + + $ perf record -e cs_etm/@tmc_etr0/u --per-thread taskset -c 2 ./sort + Bubble sorting array of 30000 elements + 12543 ms + [ perf record: Woken up 35 times to write data ] + [ perf record: Captured and wrote 69.640 MB perf.data ] + + $ perf inject -i perf.data -o inj.data --itrace=il64 --strip + $ create_gcov --binary=./sort --profile=inj.data --gcov=sort.gcov -gcov_version=1 + $ gcc-5 -O3 -fauto-profile=sort.gcov sort.c -o sort_autofdo + $ taskset -c 2 ./sort_autofdo + Bubble sorting array of 30000 elements + 5806 ms + + +How to use the STM module +------------------------- + +Using the System Trace Macrocell module is the same as the tracers - the only +difference is that clients are driving the trace capture rather +than the program flow through the code. + +As with any other CoreSight component, specifics about the STM tracer can be +found in sysfs with more information on each entry being found in [#first]_:: + + root@genericarmv8:~# ls /sys/bus/coresight/devices/stm0 + enable_source hwevent_select port_enable subsystem uevent + hwevent_enable mgmt port_select traceid + root@genericarmv8:~# + +Like any other source a sink needs to be identified and the STM enabled before +being used:: + + root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink + root@genericarmv8:~# echo 1 > /sys/bus/coresight/devices/stm0/enable_source + +From there user space applications can request and use channels using the devfs +interface provided for that purpose by the generic STM API:: + + root@genericarmv8:~# ls -l /dev/stm0 + crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 + root@genericarmv8:~# + +Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. + +The CTI & CTM Modules +--------------------- + +The CTI (Cross Trigger Interface) provides a set of trigger signals between +individual CTIs and components, and can propagate these between all CTIs via +channels on the CTM (Cross Trigger Matrix). + +A separate documentation file is provided to explain the use of these devices. +(:doc:`coresight-ect`) [#fourth]_. + + +.. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm + +.. [#second] Documentation/trace/stm.rst + +.. [#third] https://github.com/Linaro/perf-opencsd + +.. [#fourth] Documentation/trace/coresight/coresight-ect.rst -- cgit v1.2.3