From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- .../media/dvb/fe_property_parameters.rst | 1007 ++++++++++++++++++++ 1 file changed, 1007 insertions(+) create mode 100644 Documentation/userspace-api/media/dvb/fe_property_parameters.rst (limited to 'Documentation/userspace-api/media/dvb/fe_property_parameters.rst') diff --git a/Documentation/userspace-api/media/dvb/fe_property_parameters.rst b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst new file mode 100644 index 000000000..ecd84a879 --- /dev/null +++ b/Documentation/userspace-api/media/dvb/fe_property_parameters.rst @@ -0,0 +1,1007 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _fe_property_parameters: + +****************************** +Digital TV property parameters +****************************** + +There are several different Digital TV parameters that can be used by +:ref:`FE_SET_PROPERTY and FE_GET_PROPERTY ioctls`. +This section describes each of them. Please notice, however, that only +a subset of them are needed to setup a frontend. + + +.. _DTV-UNDEFINED: + +DTV_UNDEFINED +============= + +Used internally. A GET/SET operation for it won't change or return +anything. + + +.. _DTV-TUNE: + +DTV_TUNE +======== + +Interpret the cache of data, build either a traditional frontend +tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl. + + +.. _DTV-CLEAR: + +DTV_CLEAR +========= + +Reset a cache of data specific to the frontend here. This does not +effect hardware. + + +.. _DTV-FREQUENCY: + +DTV_FREQUENCY +============= + +Frequency of the digital TV transponder/channel. + +.. note:: + + #. For satellite delivery systems, the frequency is in kHz. + + #. For cable and terrestrial delivery systems, the frequency is in + Hz. + + #. On most delivery systems, the frequency is the center frequency + of the transponder/channel. The exception is for ISDB-T, where + the main carrier has a 1/7 offset from the center. + + #. For ISDB-T, the channels are usually transmitted with an offset of + about 143kHz. E.g. a valid frequency could be 474,143 kHz. The + stepping is bound to the bandwidth of the channel which is + typically 6MHz. + + #. In ISDB-Tsb, the channel consists of only one or three segments the + frequency step is 429kHz, 3*429 respectively. + + +.. _DTV-MODULATION: + +DTV_MODULATION +============== + +Specifies the frontend modulation type for delivery systems that +supports more multiple modulations. + +The modulation can be one of the types defined by enum :c:type:`fe_modulation`. + +Most of the digital TV standards offers more than one possible +modulation type. + +The table below presents a summary of the types of modulation types +supported by each delivery system, as currently defined by specs. + +======================= ======================================================= +Standard Modulation types +======================= ======================================================= +ATSC (version 1) 8-VSB and 16-VSB. +DMTB 4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR. +DVB-C Annex A/C 16-QAM, 32-QAM, 64-QAM and 256-QAM. +DVB-C Annex B 64-QAM. +DVB-T QPSK, 16-QAM and 64-QAM. +DVB-T2 QPSK, 16-QAM, 64-QAM and 256-QAM. +DVB-S No need to set. It supports only QPSK. +DVB-S2 QPSK, 8-PSK, 16-APSK and 32-APSK. +ISDB-T QPSK, DQPSK, 16-QAM and 64-QAM. +ISDB-S 8-PSK, QPSK and BPSK. +======================= ======================================================= + +.. note:: + + Please notice that some of the above modulation types may not be + defined currently at the Kernel. The reason is simple: no driver + needed such definition yet. + + +.. _DTV-BANDWIDTH-HZ: + +DTV_BANDWIDTH_HZ +================ + +Bandwidth for the channel, in HZ. + +Should be set only for terrestrial delivery systems. + +Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, +``8000000``, ``10000000``. + +======================= ======================================================= +Terrestrial Standard Possible values for bandwidth +======================= ======================================================= +ATSC (version 1) No need to set. It is always 6MHz. +DMTB No need to set. It is always 8MHz. +DVB-T 6MHz, 7MHz and 8MHz. +DVB-T2 1.172 MHz, 5MHz, 6MHz, 7MHz, 8MHz and 10MHz +ISDB-T 5MHz, 6MHz, 7MHz and 8MHz, although most places + use 6MHz. +======================= ======================================================= + + +.. note:: + + + #. For ISDB-Tsb, the bandwidth can vary depending on the number of + connected segments. + + It can be easily derived from other parameters + (DTV_ISDBT_SB_SEGMENT_IDX, DTV_ISDBT_SB_SEGMENT_COUNT). + + #. On Satellite and Cable delivery systems, the bandwidth depends on + the symbol rate. So, the Kernel will silently ignore any setting + :ref:`DTV-BANDWIDTH-HZ`. I will however fill it back with a + bandwidth estimation. + + Such bandwidth estimation takes into account the symbol rate set with + :ref:`DTV-SYMBOL-RATE`, and the rolloff factor, with is fixed for + DVB-C and DVB-S. + + For DVB-S2, the rolloff should also be set via :ref:`DTV-ROLLOFF`. + + +.. _DTV-INVERSION: + +DTV_INVERSION +============= + +Specifies if the frontend should do spectral inversion or not. + +The acceptable values are defined by :c:type:`fe_spectral_inversion`. + + +.. _DTV-DISEQC-MASTER: + +DTV_DISEQC_MASTER +================= + +Currently not implemented. + + +.. _DTV-SYMBOL-RATE: + +DTV_SYMBOL_RATE +=============== + +Used on cable and satellite delivery systems. + +Digital TV symbol rate, in bauds (symbols/second). + + +.. _DTV-INNER-FEC: + +DTV_INNER_FEC +============= + +Used on cable and satellite delivery systems. + +The acceptable values are defined by :c:type:`fe_code_rate`. + + +.. _DTV-VOLTAGE: + +DTV_VOLTAGE +=========== + +Used on satellite delivery systems. + +The voltage is usually used with non-DiSEqC capable LNBs to switch the +polarzation (horizontal/vertical). When using DiSEqC epuipment this +voltage has to be switched consistently to the DiSEqC commands as +described in the DiSEqC spec. + +The acceptable values are defined by :c:type:`fe_sec_voltage`. + + +.. _DTV-TONE: + +DTV_TONE +======== + +Currently not used. + + +.. _DTV-PILOT: + +DTV_PILOT +========= + +Used on DVB-S2. + +Sets DVB-S2 pilot. + +The acceptable values are defined by :c:type:`fe_pilot`. + + +.. _DTV-ROLLOFF: + +DTV_ROLLOFF +=========== + +Used on DVB-S2. + +Sets DVB-S2 rolloff. + +The acceptable values are defined by :c:type:`fe_rolloff`. + + +.. _DTV-DISEQC-SLAVE-REPLY: + +DTV_DISEQC_SLAVE_REPLY +====================== + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY-COUNT: + +DTV_FE_CAPABILITY_COUNT +======================= + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY: + +DTV_FE_CAPABILITY +================= + +Currently not implemented. + + +.. _DTV-DELIVERY-SYSTEM: + +DTV_DELIVERY_SYSTEM +=================== + +Specifies the type of the delivery system. + +The acceptable values are defined by :c:type:`fe_delivery_system`. + + +.. _DTV-ISDBT-PARTIAL-RECEPTION: + +DTV_ISDBT_PARTIAL_RECEPTION +=========================== + +Used only on ISDB. + +If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents +whether the channel is in partial reception mode or not. + +If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment +and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'. + +If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1' +``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel +is consisting of one segment and layer or three segments and two layers. + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SOUND-BROADCASTING: + +DTV_ISDBT_SOUND_BROADCASTING +============================ + +Used only on ISDB. + +This field represents whether the other DTV_ISDBT_*-parameters are +referring to an ISDB-T and an ISDB-Tsb channel. (See also +``DTV_ISDBT_PARTIAL_RECEPTION``). + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SUBCHANNEL-ID: + +DTV_ISDBT_SB_SUBCHANNEL_ID +========================== + +Used only on ISDB. + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +(Note of the author: This might not be the correct description of the +``SUBCHANNEL-ID`` in all details, but it is my understanding of the +technical background needed to program a device) + +An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a +set of connected ISDB-Tsb channels. In this set of channels every +channel can be received independently. The number of connected ISDB-Tsb +segment can vary, e.g. depending on the frequency spectrum bandwidth +available. + +Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The +broadcaster has several possibilities to put those channels in the air: +Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments +from position 1-8 to 5-13 or anything in between. + +The underlying layer of segments are subchannels: each segment is +consisting of several subchannels with a predefined IDs. A sub-channel +is used to help the demodulator to synchronize on the channel. + +An ISDB-T channel is always centered over all sub-channels. As for the +example above, in ISDB-Tsb it is no longer as simple as that. + +``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the +sub-channel ID of the segment to be demodulated. + +Possible values: 0 .. 41, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SEGMENT-IDX: + +DTV_ISDBT_SB_SEGMENT_IDX +======================== + +Used only on ISDB. + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be +demodulated for an ISDB-Tsb channel where several of them are +transmitted in the connected manner. + +Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1 + +Note: This value cannot be determined by an automatic channel search. + + +.. _DTV-ISDBT-SB-SEGMENT-COUNT: + +DTV_ISDBT_SB_SEGMENT_COUNT +========================== + +Used only on ISDB. + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected +ISDB-Tsb channels. + +Possible values: 1 .. 13 + +Note: This value cannot be determined by an automatic channel search. + + +.. _isdb-hierq-layers: + +DTV-ISDBT-LAYER[A-C] parameters +=============================== + +Used only on ISDB. + +ISDB-T channels can be coded hierarchically. As opposed to DVB-T in +ISDB-T hierarchical layers can be decoded simultaneously. For that +reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. + +ISDB-T has 3 hierarchical layers which each can use a part of the +available segments. The total number of segments over all layers has to +13 in ISDB-T. + +There are 3 parameter sets, for Layers A, B and C. + + +.. _DTV-ISDBT-LAYER-ENABLED: + +DTV_ISDBT_LAYER_ENABLED +----------------------- + +Used only on ISDB. + +Hierarchical reception in ISDB-T is achieved by enabling or disabling +layers in the decoding process. Setting all bits of +``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to +be demodulated. This is the default. + +If the channel is in the partial reception mode +(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded +independently of the other 12 segments. In that mode layer A has to have +a ``SEGMENT_COUNT`` of 1. + +In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according +to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled +accordingly. + +Only the values of the first 3 bits are used. Other bits will be silently ignored: + +``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled + +``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused + + +.. _DTV-ISDBT-LAYER-FEC: + +DTV_ISDBT_LAYER[A-C]_FEC +------------------------ + +Used only on ISDB. + +The Forward Error Correction mechanism used by a given ISDB Layer, as +defined by :c:type:`fe_code_rate`. + + +Possible values are: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, +``FEC_5_6``, ``FEC_7_8`` + + +.. _DTV-ISDBT-LAYER-MODULATION: + +DTV_ISDBT_LAYER[A-C]_MODULATION +------------------------------- + +Used only on ISDB. + +The modulation used by a given ISDB Layer, as defined by +:c:type:`fe_modulation`. + +Possible values are: ``QAM_AUTO``, ``QPSK``, ``QAM_16``, ``QAM_64``, ``DQPSK`` + +.. note:: + + #. If layer C is ``DQPSK``, then layer B has to be ``DQPSK``. + + #. If layer B is ``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ = 0, + then layer has to be ``DQPSK``. + + +.. _DTV-ISDBT-LAYER-SEGMENT-COUNT: + +DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT +---------------------------------- + +Used only on ISDB. + +Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) + +Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and +``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT`` + +.. _isdbt-layer_seg-cnt-table: + +.. flat-table:: Truth table for ISDB-T Sound Broadcasting + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - Partial Reception + + - Sound Broadcasting + + - Layer A width + + - Layer B width + + - Layer C width + + - total width + + - .. row 2 + + - 0 + + - 0 + + - 1 .. 13 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 3 + + - 1 + + - 0 + + - 1 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 4 + + - 0 + + - 1 + + - 1 + + - 0 + + - 0 + + - 1 + + - .. row 5 + + - 1 + + - 1 + + - 1 + + - 2 + + - 0 + + - 13 + + + +.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING: + +DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING +-------------------------------------- + +Used only on ISDB. + +Valid values: 0, 1, 2, 4, -1 (AUTO) + +when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. + +Note: The real time interleaving length depends on the mode (fft-size). +The values here are referring to what can be found in the +TMCC-structure, as shown in the table below. + + +.. c:type:: isdbt_layer_interleaving_table + +.. flat-table:: ISDB-T time interleaving modes + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING`` + + - Mode 1 (2K FFT) + + - Mode 2 (4K FFT) + + - Mode 3 (8K FFT) + + - .. row 2 + + - 0 + + - 0 + + - 0 + + - 0 + + - .. row 3 + + - 1 + + - 4 + + - 2 + + - 1 + + - .. row 4 + + - 2 + + - 8 + + - 4 + + - 2 + + - .. row 5 + + - 4 + + - 16 + + - 8 + + - 4 + + + +.. _DTV-ATSCMH-FIC-VER: + +DTV_ATSCMH_FIC_VER +------------------ + +Used only on ATSC-MH. + +Version number of the FIC (Fast Information Channel) signaling data. + +FIC is used for relaying information to allow rapid service acquisition +by the receiver. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-PARADE-ID: + +DTV_ATSCMH_PARADE_ID +-------------------- + +Used only on ATSC-MH. + +Parade identification number + +A parade is a collection of up to eight MH groups, conveying one or two +ensembles. + +Possible values: 0, 1, 2, 3, ..., 126, 127 + + +.. _DTV-ATSCMH-NOG: + +DTV_ATSCMH_NOG +-------------- + +Used only on ATSC-MH. + +Number of MH groups per MH subframe for a designated parade. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-TNOG: + +DTV_ATSCMH_TNOG +--------------- + +Used only on ATSC-MH. + +Total number of MH groups including all MH groups belonging to all MH +parades in one MH subframe. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-SGN: + +DTV_ATSCMH_SGN +-------------- + +Used only on ATSC-MH. + +Start group number. + +Possible values: 0, 1, 2, 3, ..., 14, 15 + + +.. _DTV-ATSCMH-PRC: + +DTV_ATSCMH_PRC +-------------- + +Used only on ATSC-MH. + +Parade repetition cycle. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-RS-FRAME-MODE: + +DTV_ATSCMH_RS_FRAME_MODE +------------------------ + +Used only on ATSC-MH. + +Reed Solomon (RS) frame mode. + +The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`. + + +.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE: + +DTV_ATSCMH_RS_FRAME_ENSEMBLE +---------------------------- + +Used only on ATSC-MH. + +Reed Solomon(RS) frame ensemble. + +The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`. + + +.. _DTV-ATSCMH-RS-CODE-MODE-PRI: + +DTV_ATSCMH_RS_CODE_MODE_PRI +--------------------------- + +Used only on ATSC-MH. + +Reed Solomon (RS) code mode (primary). + +The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. + + +.. _DTV-ATSCMH-RS-CODE-MODE-SEC: + +DTV_ATSCMH_RS_CODE_MODE_SEC +--------------------------- + +Used only on ATSC-MH. + +Reed Solomon (RS) code mode (secondary). + +The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. + + +.. _DTV-ATSCMH-SCCC-BLOCK-MODE: + +DTV_ATSCMH_SCCC_BLOCK_MODE +-------------------------- + +Used only on ATSC-MH. + +Series Concatenated Convolutional Code Block Mode. + +The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-A: + +DTV_ATSCMH_SCCC_CODE_MODE_A +--------------------------- + +Used only on ATSC-MH. + +Series Concatenated Convolutional Code Rate. + +The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`. + +.. _DTV-ATSCMH-SCCC-CODE-MODE-B: + +DTV_ATSCMH_SCCC_CODE_MODE_B +--------------------------- + +Used only on ATSC-MH. + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:c:type:`atscmh_sccc_code_mode`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-C: + +DTV_ATSCMH_SCCC_CODE_MODE_C +--------------------------- + +Used only on ATSC-MH. + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:c:type:`atscmh_sccc_code_mode`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-D: + +DTV_ATSCMH_SCCC_CODE_MODE_D +--------------------------- + +Used only on ATSC-MH. + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:c:type:`atscmh_sccc_code_mode`. + + +.. _DTV-API-VERSION: + +DTV_API_VERSION +=============== + +Returns the major/minor version of the Digital TV API + + +.. _DTV-CODE-RATE-HP: + +DTV_CODE_RATE_HP +================ + +Used on terrestrial transmissions. + +The acceptable values are defined by :c:type:`fe_transmit_mode`. + + +.. _DTV-CODE-RATE-LP: + +DTV_CODE_RATE_LP +================ + +Used on terrestrial transmissions. + +The acceptable values are defined by :c:type:`fe_transmit_mode`. + + +.. _DTV-GUARD-INTERVAL: + +DTV_GUARD_INTERVAL +================== + +The acceptable values are defined by :c:type:`fe_guard_interval`. + +.. note:: + + #. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the + hardware will try to find the correct guard interval (if capable) and + will use TMCC to fill in the missing parameters. + #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128`` + and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at + present. + #. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and + ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present. + On such standard, only those intervals and ``GUARD_INTERVAL_AUTO`` + are valid. + +.. _DTV-TRANSMISSION-MODE: + +DTV_TRANSMISSION_MODE +===================== + + +Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB. + +Specifies the FFT size (with corresponds to the approximate number of +carriers) used by the standard. + +The acceptable values are defined by :c:type:`fe_transmit_mode`. + +.. note:: + + #. ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called + **mode** on such standard, and are numbered from 1 to 3: + + ==== ======== ======================== + Mode FFT size Transmission mode + ==== ======== ======================== + 1 2K ``TRANSMISSION_MODE_2K`` + 2 4K ``TRANSMISSION_MODE_4K`` + 3 8K ``TRANSMISSION_MODE_8K`` + ==== ======== ======================== + + #. If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` + the hardware will try to find the correct FFT-size (if capable) and + will use TMCC to fill in the missing parameters. + + #. DVB-T specifies 2K and 8K as valid sizes. + + #. DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + + #. DTMB specifies C1 and C3780. + + +.. _DTV-HIERARCHY: + +DTV_HIERARCHY +============= + +Used only on DVB-T and DVB-T2. + +Frontend hierarchy. + +The acceptable values are defined by :c:type:`fe_hierarchy`. + + +.. _DTV-STREAM-ID: + +DTV_STREAM_ID +============= + +Used on DVB-S2, DVB-T2 and ISDB-S. + +DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on +a single transport stream. This property enables the digital TV driver to +handle substream filtering, when supported by the hardware. By default, +substream filtering is disabled. + +For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + +For ISDB, the valid substream id range is from 1 to 65535. + +To disable it, you should use the special macro NO_STREAM_ID_FILTER. + +Note: any value outside the id range also disables filtering. + + +.. _DTV-DVBT2-PLP-ID-LEGACY: + +DTV_DVBT2_PLP_ID_LEGACY +======================= + +Obsolete, replaced with DTV_STREAM_ID. + + +.. _DTV-ENUM-DELSYS: + +DTV_ENUM_DELSYS +=============== + +A Multi standard frontend needs to advertise the delivery systems +provided. Applications need to enumerate the provided delivery systems, +before using any other operation with the frontend. Prior to it's +introduction, FE_GET_INFO was used to determine a frontend type. A +frontend which provides more than a single delivery system, +FE_GET_INFO doesn't help much. Applications which intends to use a +multistandard frontend must enumerate the delivery systems associated +with it, rather than trying to use FE_GET_INFO. In the case of a +legacy frontend, the result is just the same as with FE_GET_INFO, but +in a more structured format + +The acceptable values are defined by :c:type:`fe_delivery_system`. + + +.. _DTV-INTERLEAVING: + +DTV_INTERLEAVING +================ + +Time interleaving to be used. + +The acceptable values are defined by :c:type:`fe_interleaving`. + + +.. _DTV-LNA: + +DTV_LNA +======= + +Low-noise amplifier. + +Hardware might offer controllable LNA which can be set manually using +that parameter. Usually LNA could be found only from terrestrial devices +if at all. + +Possible values: 0, 1, LNA_AUTO + +0, LNA off + +1, LNA on + +use the special macro LNA_AUTO to set LNA auto + + +.. _DTV-SCRAMBLING-SEQUENCE-INDEX: + +DTV_SCRAMBLING_SEQUENCE_INDEX +============================= + +Used on DVB-S2. + +This 18 bit field, when present, carries the index of the DVB-S2 physical +layer scrambling sequence as defined in clause 5.5.4 of EN 302 307. +There is no explicit signalling method to convey scrambling sequence index +to the receiver. If S2 satellite delivery system descriptor is available +it can be used to read the scrambling sequence index (EN 300 468 table 41). + +By default, gold scrambling sequence index 0 is used. + +The valid scrambling sequence index range is from 0 to 262142. -- cgit v1.2.3