From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- Documentation/virt/kvm/devices/README | 1 + Documentation/virt/kvm/devices/arm-vgic-its.rst | 209 +++++++++++++++ Documentation/virt/kvm/devices/arm-vgic-v3.rst | 291 +++++++++++++++++++++ Documentation/virt/kvm/devices/arm-vgic.rst | 156 ++++++++++++ Documentation/virt/kvm/devices/index.rst | 19 ++ Documentation/virt/kvm/devices/mpic.rst | 58 +++++ Documentation/virt/kvm/devices/s390_flic.rst | 166 ++++++++++++ Documentation/virt/kvm/devices/vcpu.rst | 163 ++++++++++++ Documentation/virt/kvm/devices/vfio.rst | 41 +++ Documentation/virt/kvm/devices/vm.rst | 323 ++++++++++++++++++++++++ Documentation/virt/kvm/devices/xics.rst | 92 +++++++ Documentation/virt/kvm/devices/xive.rst | 247 ++++++++++++++++++ 12 files changed, 1766 insertions(+) create mode 100644 Documentation/virt/kvm/devices/README create mode 100644 Documentation/virt/kvm/devices/arm-vgic-its.rst create mode 100644 Documentation/virt/kvm/devices/arm-vgic-v3.rst create mode 100644 Documentation/virt/kvm/devices/arm-vgic.rst create mode 100644 Documentation/virt/kvm/devices/index.rst create mode 100644 Documentation/virt/kvm/devices/mpic.rst create mode 100644 Documentation/virt/kvm/devices/s390_flic.rst create mode 100644 Documentation/virt/kvm/devices/vcpu.rst create mode 100644 Documentation/virt/kvm/devices/vfio.rst create mode 100644 Documentation/virt/kvm/devices/vm.rst create mode 100644 Documentation/virt/kvm/devices/xics.rst create mode 100644 Documentation/virt/kvm/devices/xive.rst (limited to 'Documentation/virt/kvm/devices') diff --git a/Documentation/virt/kvm/devices/README b/Documentation/virt/kvm/devices/README new file mode 100644 index 000000000..34a698341 --- /dev/null +++ b/Documentation/virt/kvm/devices/README @@ -0,0 +1 @@ +This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL. diff --git a/Documentation/virt/kvm/devices/arm-vgic-its.rst b/Documentation/virt/kvm/devices/arm-vgic-its.rst new file mode 100644 index 000000000..6c304fd2b --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic-its.rst @@ -0,0 +1,209 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================== +ARM Virtual Interrupt Translation Service (ITS) +=============================================== + +Device types supported: + KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller + +The ITS allows MSI(-X) interrupts to be injected into guests. This extension is +optional. Creating a virtual ITS controller also requires a host GICv3 (see +arm-vgic-v3.txt), but does not depend on having physical ITS controllers. + +There can be multiple ITS controllers per guest, each of them has to have +a separate, non-overlapping MMIO region. + + +Groups +====== + +KVM_DEV_ARM_VGIC_GRP_ADDR +------------------------- + + Attributes: + KVM_VGIC_ITS_ADDR_TYPE (rw, 64-bit) + Base address in the guest physical address space of the GICv3 ITS + control register frame. + This address needs to be 64K aligned and the region covers 128K. + + Errors: + + ======= ================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address + -EEXIST Address already configured + -EFAULT Invalid user pointer for attr->addr. + -ENODEV Incorrect attribute or the ITS is not supported. + ======= ================================================= + + +KVM_DEV_ARM_VGIC_GRP_CTRL +------------------------- + + Attributes: + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the ITS, no additional parameter in + kvm_device_attr.addr. + + KVM_DEV_ARM_ITS_CTRL_RESET + reset the ITS, no additional parameter in kvm_device_attr.addr. + See "ITS Reset State" section. + + KVM_DEV_ARM_ITS_SAVE_TABLES + save the ITS table data into guest RAM, at the location provisioned + by the guest in corresponding registers/table entries. + + The layout of the tables in guest memory defines an ABI. The entries + are laid out in little endian format as described in the last paragraph. + + KVM_DEV_ARM_ITS_RESTORE_TABLES + restore the ITS tables from guest RAM to ITS internal structures. + + The GICV3 must be restored before the ITS and all ITS registers but + the GITS_CTLR must be restored before restoring the ITS tables. + + The GITS_IIDR read-only register must also be restored before + calling KVM_DEV_ARM_ITS_RESTORE_TABLES as the IIDR revision field + encodes the ABI revision. + + The expected ordering when restoring the GICv3/ITS is described in section + "ITS Restore Sequence". + + Errors: + + ======= ========================================================== + -ENXIO ITS not properly configured as required prior to setting + this attribute + -ENOMEM Memory shortage when allocating ITS internal data + -EINVAL Inconsistent restored data + -EFAULT Invalid guest ram access + -EBUSY One or more VCPUS are running + -EACCES The virtual ITS is backed by a physical GICv4 ITS, and the + state is not available + ======= ========================================================== + +KVM_DEV_ARM_VGIC_GRP_ITS_REGS +----------------------------- + + Attributes: + The attr field of kvm_device_attr encodes the offset of the + ITS register, relative to the ITS control frame base address + (ITS_base). + + kvm_device_attr.addr points to a __u64 value whatever the width + of the addressed register (32/64 bits). 64 bit registers can only + be accessed with full length. + + Writes to read-only registers are ignored by the kernel except for: + + - GITS_CREADR. It must be restored otherwise commands in the queue + will be re-executed after restoring CWRITER. GITS_CREADR must be + restored before restoring the GITS_CTLR which is likely to enable the + ITS. Also it must be restored after GITS_CBASER since a write to + GITS_CBASER resets GITS_CREADR. + - GITS_IIDR. The Revision field encodes the table layout ABI revision. + In the future we might implement direct injection of virtual LPIs. + This will require an upgrade of the table layout and an evolution of + the ABI. GITS_IIDR must be restored before calling + KVM_DEV_ARM_ITS_RESTORE_TABLES. + + For other registers, getting or setting a register has the same + effect as reading/writing the register on real hardware. + + Errors: + + ======= ==================================================== + -ENXIO Offset does not correspond to any supported register + -EFAULT Invalid user pointer for attr->addr + -EINVAL Offset is not 64-bit aligned + -EBUSY one or more VCPUS are running + ======= ==================================================== + +ITS Restore Sequence: +--------------------- + +The following ordering must be followed when restoring the GIC and the ITS: + +a) restore all guest memory and create vcpus +b) restore all redistributors +c) provide the ITS base address + (KVM_DEV_ARM_VGIC_GRP_ADDR) +d) restore the ITS in the following order: + + 1. Restore GITS_CBASER + 2. Restore all other ``GITS_`` registers, except GITS_CTLR! + 3. Load the ITS table data (KVM_DEV_ARM_ITS_RESTORE_TABLES) + 4. Restore GITS_CTLR + +Then vcpus can be started. + +ITS Table ABI REV0: +------------------- + + Revision 0 of the ABI only supports the features of a virtual GICv3, and does + not support a virtual GICv4 with support for direct injection of virtual + interrupts for nested hypervisors. + + The device table and ITT are indexed by the DeviceID and EventID, + respectively. The collection table is not indexed by CollectionID, and the + entries in the collection are listed in no particular order. + All entries are 8 bytes. + + Device Table Entry (DTE):: + + bits: | 63| 62 ... 49 | 48 ... 5 | 4 ... 0 | + values: | V | next | ITT_addr | Size | + + where: + + - V indicates whether the entry is valid. If not, other fields + are not meaningful. + - next: equals to 0 if this entry is the last one; otherwise it + corresponds to the DeviceID offset to the next DTE, capped by + 2^14 -1. + - ITT_addr matches bits [51:8] of the ITT address (256 Byte aligned). + - Size specifies the supported number of bits for the EventID, + minus one + + Collection Table Entry (CTE):: + + bits: | 63| 62 .. 52 | 51 ... 16 | 15 ... 0 | + values: | V | RES0 | RDBase | ICID | + + where: + + - V indicates whether the entry is valid. If not, other fields are + not meaningful. + - RES0: reserved field with Should-Be-Zero-or-Preserved behavior. + - RDBase is the PE number (GICR_TYPER.Processor_Number semantic), + - ICID is the collection ID + + Interrupt Translation Entry (ITE):: + + bits: | 63 ... 48 | 47 ... 16 | 15 ... 0 | + values: | next | pINTID | ICID | + + where: + + - next: equals to 0 if this entry is the last one; otherwise it corresponds + to the EventID offset to the next ITE capped by 2^16 -1. + - pINTID is the physical LPI ID; if zero, it means the entry is not valid + and other fields are not meaningful. + - ICID is the collection ID + +ITS Reset State: +---------------- + +RESET returns the ITS to the same state that it was when first created and +initialized. When the RESET command returns, the following things are +guaranteed: + +- The ITS is not enabled and quiescent + GITS_CTLR.Enabled = 0 .Quiescent=1 +- There is no internally cached state +- No collection or device table are used + GITS_BASER.Valid = 0 +- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0 +- The ABI version is unchanged and remains the one set when the ITS + device was first created. diff --git a/Documentation/virt/kvm/devices/arm-vgic-v3.rst b/Documentation/virt/kvm/devices/arm-vgic-v3.rst new file mode 100644 index 000000000..5dd3bff51 --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic-v3.rst @@ -0,0 +1,291 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================== +ARM Virtual Generic Interrupt Controller v3 and later (VGICv3) +============================================================== + + +Device types supported: + - KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0 + +Only one VGIC instance may be instantiated through this API. The created VGIC +will act as the VM interrupt controller, requiring emulated user-space devices +to inject interrupts to the VGIC instead of directly to CPUs. It is not +possible to create both a GICv3 and GICv2 on the same VM. + +Creating a guest GICv3 device requires a host GICv3 as well. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + + KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned and the region covers 64 KByte. + + KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 + redistributor register mappings. There are two 64K pages for each + VCPU and all of the redistributor pages are contiguous. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned. + + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION (rw, 64-bit) + The attribute data pointed to by kvm_device_attr.addr is a __u64 value:: + + bits: | 63 .... 52 | 51 .... 16 | 15 - 12 |11 - 0 + values: | count | base | flags | index + + - index encodes the unique redistributor region index + - flags: reserved for future use, currently 0 + - base field encodes bits [51:16] of the guest physical base address + of the first redistributor in the region. + - count encodes the number of redistributors in the region. Must be + greater than 0. + + There are two 64K pages for each redistributor in the region and + redistributors are laid out contiguously within the region. Regions + are filled with redistributors in the index order. The sum of all + region count fields must be greater than or equal to the number of + VCPUs. Redistributor regions must be registered in the incremental + index order, starting from index 0. + + The characteristics of a specific redistributor region can be read + by presetting the index field in the attr data. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + + It is invalid to mix calls with KVM_VGIC_V3_ADDR_TYPE_REDIST and + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes. + + Errors: + + ======= ============================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address, bad redistributor region + count/index, mixed redistributor region attribute usage + -EEXIST Address already configured + -ENOENT Attempt to read the characteristics of a non existing + redistributor region + -ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT Invalid user pointer for attr->addr. + ======= ============================================================= + + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 0 | + values: | mpidr | offset | + + All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a + __u32 value. 64-bit registers must be accessed by separately accessing the + lower and higher word. + + Writes to read-only registers are ignored by the kernel. + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers. + KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU + specified by the mpidr. + + The offset is relative to the "[Re]Distributor base address" as defined + in the GICv3/4 specs. Getting or setting such a register has the same + effect as reading or writing the register on real hardware, except for the + following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR, + GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave + differently when accessed via this interface compared to their + architecturally defined behavior to allow software a full view of the + VGIC's internal state. + + The mpidr field is used to specify which + redistributor is accessed. The mpidr is ignored for the distributor. + + The mpidr encoding is based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Note that distributor fields are not banked, but return the same value + regardless of the mpidr used to access the register. + + GICD_IIDR.Revision is updated when the KVM implementation is changed in a + way directly observable by the guest or userspace. Userspace should read + GICD_IIDR from KVM and write back the read value to confirm its expected + behavior is aligned with the KVM implementation. Userspace should set + GICD_IIDR before setting any other registers to ensure the expected + behavior. + + + The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such + that a write of a clear bit has no effect, whereas a write with a set bit + clears that value. To allow userspace to freely set the values of these two + registers, setting the attributes with the register offsets for these two + registers simply sets the non-reserved bits to the value written. + + + Accesses (reads and writes) to the GICD_ISPENDR register region and + GICR_ISPENDR0 registers get/set the value of the latched pending state for + the interrupts. + + This is identical to the value returned by a guest read from ISPENDR for an + edge triggered interrupt, but may differ for level triggered interrupts. + For edge triggered interrupts, once an interrupt becomes pending (whether + because of an edge detected on the input line or because of a guest write + to ISPENDR) this state is "latched", and only cleared when either the + interrupt is activated or when the guest writes to ICPENDR. A level + triggered interrupt may be pending either because the level input is held + high by a device, or because of a guest write to the ISPENDR register. Only + ISPENDR writes are latched; if the device lowers the line level then the + interrupt is no longer pending unless the guest also wrote to ISPENDR, and + conversely writes to ICPENDR or activations of the interrupt do not clear + the pending status if the line level is still being held high. (These + rules are documented in the GICv3 specification descriptions of the ICPENDR + and ISPENDR registers.) For a level triggered interrupt the value accessed + here is that of the latch which is set by ISPENDR and cleared by ICPENDR or + interrupt activation, whereas the value returned by a guest read from + ISPENDR is the logical OR of the latch value and the input line level. + + Raw access to the latch state is provided to userspace so that it can save + and restore the entire GIC internal state (which is defined by the + combination of the current input line level and the latch state, and cannot + be deduced from purely the line level and the value of the ISPENDR + registers). + + Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have + RAZ/WI semantics, meaning that reads always return 0 and writes are always + ignored. + + Errors: + + ====== ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + ====== ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 | + values: | mpidr | RES | instr | + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + The instr field encodes the system register to access based on the fields + defined in the A64 instruction set encoding for system register access + (RES means the bits are reserved for future use and should be zero):: + + | 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 | + | Op 0 | Op1 | CRn | CRm | Op2 | + + All system regs accessed through this API are (rw, 64-bit) and + kvm_device_attr.addr points to a __u64 value. + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the + CPU specified by the mpidr field. + + CPU interface registers access is not implemented for AArch32 mode. + Error -ENXIO is returned when accessed in AArch32 mode. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY VCPU is running + -EINVAL Invalid mpidr or register value supplied + ======= ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + kvm_device_attr.addr points to a __u32 value. + + Errors: + + ======= ====================================== + -EINVAL Value set is out of the expected range + -EBUSY Value has already be set. + ======= ====================================== + + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC, no additional parameter in + kvm_device_attr.addr. + KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES + save all LPI pending bits into guest RAM pending tables. + + The first kB of the pending table is not altered by this operation. + + Errors: + + ======= ======================================================== + -ENXIO VGIC not properly configured as required prior to calling + this attribute + -ENODEV no online VCPU + -ENOMEM memory shortage when allocating vgic internal data + -EFAULT Invalid guest ram access + -EBUSY One or more VCPUS are running + ======= ======================================================== + + + KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO + Attributes: + + The attr field of kvm_device_attr encodes the following values:: + + bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 | + values: | mpidr | info | vINTID | + + The vINTID specifies which set of IRQs is reported on. + + The info field specifies which information userspace wants to get or set + using this interface. Currently we support the following info values: + + VGIC_LEVEL_INFO_LINE_LEVEL: + Get/Set the input level of the IRQ line for a set of 32 contiguously + numbered interrupts. + + vINTID must be a multiple of 32. + + kvm_device_attr.addr points to a __u32 value which will contain a + bitmap where a set bit means the interrupt level is asserted. + + Bit[n] indicates the status for interrupt vINTID + n. + + SGIs and any interrupt with a higher ID than the number of interrupts + supported, will be RAZ/WI. LPIs are always edge-triggered and are + therefore not supported by this interface. + + PPIs are reported per VCPU as specified in the mpidr field, and SPIs are + reported with the same value regardless of the mpidr specified. + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Errors: + + ======= ============================================= + -EINVAL vINTID is not multiple of 32 or info field is + not VGIC_LEVEL_INFO_LINE_LEVEL + ======= ============================================= diff --git a/Documentation/virt/kvm/devices/arm-vgic.rst b/Documentation/virt/kvm/devices/arm-vgic.rst new file mode 100644 index 000000000..40bdeea1d --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic.rst @@ -0,0 +1,156 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================================== +ARM Virtual Generic Interrupt Controller v2 (VGIC) +================================================== + +Device types supported: + + - KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0 + +Only one VGIC instance may be instantiated through either this API or the +legacy KVM_CREATE_IRQCHIP API. The created VGIC will act as the VM interrupt +controller, requiring emulated user-space devices to inject interrupts to the +VGIC instead of directly to CPUs. + +GICv3 implementations with hardware compatibility support allow creating a +guest GICv2 through this interface. For information on creating a guest GICv3 +device and guest ITS devices, see arm-vgic-v3.txt. It is not possible to +create both a GICv3 and GICv2 device on the same VM. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + + KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GIC distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. + This address needs to be 4K aligned and the region covers 4 KByte. + + KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit) + Base address in the guest physical address space of the GIC virtual cpu + interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. + This address needs to be 4K aligned and the region covers 4 KByte. + + Errors: + + ======= ============================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address + -EEXIST Address already configured + -ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT Invalid user pointer for attr->addr. + ======= ============================================================= + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | vcpu_index | offset | + + All distributor regs are (rw, 32-bit) + + The offset is relative to the "Distributor base address" as defined in the + GICv2 specs. Getting or setting such a register has the same effect as + reading or writing the register on the actual hardware from the cpu whose + index is specified with the vcpu_index field. Note that most distributor + fields are not banked, but return the same value regardless of the + vcpu_index used to access the register. + + GICD_IIDR.Revision is updated when the KVM implementation of an emulated + GICv2 is changed in a way directly observable by the guest or userspace. + Userspace should read GICD_IIDR from KVM and write back the read value to + confirm its expected behavior is aligned with the KVM implementation. + Userspace should set GICD_IIDR before setting any other registers (both + KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure + the expected behavior. Unless GICD_IIDR has been set from userspace, writes + to the interrupt group registers (GICD_IGROUPR) are ignored. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + -EINVAL Invalid vcpu_index supplied + ======= ===================================================== + + KVM_DEV_ARM_VGIC_GRP_CPU_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | vcpu_index | offset | + + All CPU interface regs are (rw, 32-bit) + + The offset specifies the offset from the "CPU interface base address" as + defined in the GICv2 specs. Getting or setting such a register has the + same effect as reading or writing the register on the actual hardware. + + The Active Priorities Registers APRn are implementation defined, so we set a + fixed format for our implementation that fits with the model of a "GICv2 + implementation without the security extensions" which we present to the + guest. This interface always exposes four register APR[0-3] describing the + maximum possible 128 preemption levels. The semantics of the register + indicate if any interrupts in a given preemption level are in the active + state by setting the corresponding bit. + + Thus, preemption level X has one or more active interrupts if and only if: + + APRn[X mod 32] == 0b1, where n = X / 32 + + Bits for undefined preemption levels are RAZ/WI. + + Note that this differs from a CPU's view of the APRs on hardware in which + a GIC without the security extensions expose group 0 and group 1 active + priorities in separate register groups, whereas we show a combined view + similar to GICv2's GICH_APR. + + For historical reasons and to provide ABI compatibility with userspace we + export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask + field in the lower 5 bits of a word, meaning that userspace must always + use the lower 5 bits to communicate with the KVM device and must shift the + value left by 3 places to obtain the actual priority mask level. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + -EINVAL Invalid vcpu_index supplied + ======= ===================================================== + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + Errors: + + ======= ============================================================= + -EINVAL Value set is out of the expected range + -EBUSY Value has already be set, or GIC has already been initialized + with default values. + ======= ============================================================= + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC or ITS, no additional parameter + in kvm_device_attr.addr. + + Errors: + + ======= ========================================================= + -ENXIO VGIC not properly configured as required prior to calling + this attribute + -ENODEV no online VCPU + -ENOMEM memory shortage when allocating vgic internal data + ======= ========================================================= diff --git a/Documentation/virt/kvm/devices/index.rst b/Documentation/virt/kvm/devices/index.rst new file mode 100644 index 000000000..192cda740 --- /dev/null +++ b/Documentation/virt/kvm/devices/index.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======= +Devices +======= + +.. toctree:: + :maxdepth: 2 + + arm-vgic-its + arm-vgic + arm-vgic-v3 + mpic + s390_flic + vcpu + vfio + vm + xics + xive diff --git a/Documentation/virt/kvm/devices/mpic.rst b/Documentation/virt/kvm/devices/mpic.rst new file mode 100644 index 000000000..55cefe030 --- /dev/null +++ b/Documentation/virt/kvm/devices/mpic.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +MPIC interrupt controller +========================= + +Device types supported: + + - KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0 + - KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2 + +Only one MPIC instance, of any type, may be instantiated. The created +MPIC will act as the system interrupt controller, connecting to each +vcpu's interrupt inputs. + +Groups: + KVM_DEV_MPIC_GRP_MISC + Attributes: + + KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit) + Base address of the 256 KiB MPIC register space. Must be + naturally aligned. A value of zero disables the mapping. + Reset value is zero. + + KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit) + Access an MPIC register, as if the access were made from the guest. + "attr" is the byte offset into the MPIC register space. Accesses + must be 4-byte aligned. + + MSIs may be signaled by using this attribute group to write + to the relevant MSIIR. + + KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit) + IRQ input line for each standard openpic source. 0 is inactive and 1 + is active, regardless of interrupt sense. + + For edge-triggered interrupts: Writing 1 is considered an activating + edge, and writing 0 is ignored. Reading returns 1 if a previously + signaled edge has not been acknowledged, and 0 otherwise. + + "attr" is the IRQ number. IRQ numbers for standard sources are the + byte offset of the relevant IVPR from EIVPR0, divided by 32. + +IRQ Routing: + + The MPIC emulation supports IRQ routing. Only a single MPIC device can + be instantiated. Once that device has been created, it's available as + irqchip id 0. + + This irqchip 0 has 256 interrupt pins, which expose the interrupts in + the main array of interrupt sources (a.k.a. "SRC" interrupts). + + The numbering is the same as the MPIC device tree binding -- based on + the register offset from the beginning of the sources array, without + regard to any subdivisions in chip documentation such as "internal" + or "external" interrupts. + + Access to non-SRC interrupts is not implemented through IRQ routing mechanisms. diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst new file mode 100644 index 000000000..ea96559ba --- /dev/null +++ b/Documentation/virt/kvm/devices/s390_flic.rst @@ -0,0 +1,166 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================== +FLIC (floating interrupt controller) +==================================== + +FLIC handles floating (non per-cpu) interrupts, i.e. I/O, service and some +machine check interruptions. All interrupts are stored in a per-vm list of +pending interrupts. FLIC performs operations on this list. + +Only one FLIC instance may be instantiated. + +FLIC provides support to +- add interrupts (KVM_DEV_FLIC_ENQUEUE) +- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS) +- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS) +- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ) +- enable/disable for the guest transparent async page faults +- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*) +- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM) +- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT) +- get/set all AIS mode states (KVM_DEV_FLIC_AISM_ALL) + +Groups: + KVM_DEV_FLIC_ENQUEUE + Passes a buffer and length into the kernel which are then injected into + the list of pending interrupts. + attr->addr contains the pointer to the buffer and attr->attr contains + the length of the buffer. + The format of the data structure kvm_s390_irq as it is copied from userspace + is defined in usr/include/linux/kvm.h. + + KVM_DEV_FLIC_GET_ALL_IRQS + Copies all floating interrupts into a buffer provided by userspace. + When the buffer is too small it returns -ENOMEM, which is the indication + for userspace to try again with a bigger buffer. + + -ENOBUFS is returned when the allocation of a kernelspace buffer has + failed. + + -EFAULT is returned when copying data to userspace failed. + All interrupts remain pending, i.e. are not deleted from the list of + currently pending interrupts. + attr->addr contains the userspace address of the buffer into which all + interrupt data will be copied. + attr->attr contains the size of the buffer in bytes. + + KVM_DEV_FLIC_CLEAR_IRQS + Simply deletes all elements from the list of currently pending floating + interrupts. No interrupts are injected into the guest. + + KVM_DEV_FLIC_CLEAR_IO_IRQ + Deletes one (if any) I/O interrupt for a subchannel identified by the + subsystem identification word passed via the buffer specified by + attr->addr (address) and attr->attr (length). + + KVM_DEV_FLIC_APF_ENABLE + Enables async page faults for the guest. So in case of a major page fault + the host is allowed to handle this async and continues the guest. + + KVM_DEV_FLIC_APF_DISABLE_WAIT + Disables async page faults for the guest and waits until already pending + async page faults are done. This is necessary to trigger a completion interrupt + for every init interrupt before migrating the interrupt list. + + KVM_DEV_FLIC_ADAPTER_REGISTER + Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter + describing the adapter to register:: + + struct kvm_s390_io_adapter { + __u32 id; + __u8 isc; + __u8 maskable; + __u8 swap; + __u8 flags; + }; + + id contains the unique id for the adapter, isc the I/O interruption subclass + to use, maskable whether this adapter may be masked (interrupts turned off), + swap whether the indicators need to be byte swapped, and flags contains + further characteristics of the adapter. + + Currently defined values for 'flags' are: + + - KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS + (adapter-interrupt-suppression) facility. This flag only has an effect if + the AIS capability is enabled. + + Unknown flag values are ignored. + + + KVM_DEV_FLIC_ADAPTER_MODIFY + Modifies attributes of an existing I/O adapter interrupt source. Takes + a kvm_s390_io_adapter_req specifying the adapter and the operation:: + + struct kvm_s390_io_adapter_req { + __u32 id; + __u8 type; + __u8 mask; + __u16 pad0; + __u64 addr; + }; + + id specifies the adapter and type the operation. The supported operations + are: + + KVM_S390_IO_ADAPTER_MASK + mask or unmask the adapter, as specified in mask + + KVM_S390_IO_ADAPTER_MAP + This is now a no-op. The mapping is purely done by the irq route. + KVM_S390_IO_ADAPTER_UNMAP + This is now a no-op. The mapping is purely done by the irq route. + + KVM_DEV_FLIC_AISM + modify the adapter-interruption-suppression mode for a given isc if the + AIS capability is enabled. Takes a kvm_s390_ais_req describing:: + + struct kvm_s390_ais_req { + __u8 isc; + __u16 mode; + }; + + isc contains the target I/O interruption subclass, mode the target + adapter-interruption-suppression mode. The following modes are + currently supported: + + - KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection + is always allowed; + - KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq + injection is only allowed once and the following adapter interrupts + will be suppressed until the mode is set again to ALL-Interruptions + or SINGLE-Interruption mode. + + KVM_DEV_FLIC_AIRQ_INJECT + Inject adapter interrupts on a specified adapter. + attr->attr contains the unique id for the adapter, which allows for + adapter-specific checks and actions. + For adapters subject to AIS, handle the airq injection suppression for + an isc according to the adapter-interruption-suppression mode on condition + that the AIS capability is enabled. + + KVM_DEV_FLIC_AISM_ALL + Gets or sets the adapter-interruption-suppression mode for all ISCs. Takes + a kvm_s390_ais_all describing:: + + struct kvm_s390_ais_all { + __u8 simm; /* Single-Interruption-Mode mask */ + __u8 nimm; /* No-Interruption-Mode mask * + }; + + simm contains Single-Interruption-Mode mask for all ISCs, nimm contains + No-Interruption-Mode mask for all ISCs. Each bit in simm and nimm corresponds + to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and + nimm bit presents AIS mode for a ISC. + + KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION. + +Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on +FLIC with an unknown group or attribute gives the error code EINVAL (instead of +ENXIO, as specified in the API documentation). It is not possible to conclude +that a FLIC operation is unavailable based on the error code resulting from a +usage attempt. + +.. note:: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a + zero schid is specified. diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst new file mode 100644 index 000000000..2acec3b9e --- /dev/null +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -0,0 +1,163 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Generic vcpu interface +====================== + +The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, +KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct +kvm_device_attr as other devices, but targets VCPU-wide settings and controls. + +The groups and attributes per virtual cpu, if any, are architecture specific. + +1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL +================================== + +:Architectures: ARM64 + +1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ +--------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a + pointer to an int + +Returns: + + ======= ======================================================== + -EBUSY The PMU overflow interrupt is already set + -EFAULT Error reading interrupt number + -ENXIO PMUv3 not supported or the overflow interrupt not set + when attempting to get it + -ENODEV KVM_ARM_VCPU_PMU_V3 feature missing from VCPU + -EINVAL Invalid PMU overflow interrupt number supplied or + trying to set the IRQ number without using an in-kernel + irqchip. + ======= ======================================================== + +A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt +number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt +type must be same for each vcpu. As a PPI, the interrupt number is the same for +all vcpus, while as an SPI it must be a separate number per vcpu. + +1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT +--------------------------------------- + +:Parameters: no additional parameter in kvm_device_attr.addr + +Returns: + + ======= ====================================================== + -EEXIST Interrupt number already used + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not supported, missing VCPU feature or interrupt + number not set + -EBUSY PMUv3 already initialized + ======= ====================================================== + +Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel +virtual GIC implementation, this must be done after initializing the in-kernel +irqchip. + +1.3 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_FILTER +----------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for a PMU event filter is a + pointer to a struct kvm_pmu_event_filter + +:Returns: + + ======= ====================================================== + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not properly configured or in-kernel irqchip not + configured as required prior to calling this attribute + -EBUSY PMUv3 already initialized + -EINVAL Invalid filter range + ======= ====================================================== + +Request the installation of a PMU event filter described as follows:: + + struct kvm_pmu_event_filter { + __u16 base_event; + __u16 nevents; + + #define KVM_PMU_EVENT_ALLOW 0 + #define KVM_PMU_EVENT_DENY 1 + + __u8 action; + __u8 pad[3]; + }; + +A filter range is defined as the range [@base_event, @base_event + @nevents), +together with an @action (KVM_PMU_EVENT_ALLOW or KVM_PMU_EVENT_DENY). The +first registered range defines the global policy (global ALLOW if the first +@action is DENY, global DENY if the first @action is ALLOW). Multiple ranges +can be programmed, and must fit within the event space defined by the PMU +architecture (10 bits on ARMv8.0, 16 bits from ARMv8.1 onwards). + +Note: "Cancelling" a filter by registering the opposite action for the same +range doesn't change the default action. For example, installing an ALLOW +filter for event range [0:10) as the first filter and then applying a DENY +action for the same range will leave the whole range as disabled. + +Restrictions: Event 0 (SW_INCR) is never filtered, as it doesn't count a +hardware event. Filtering event 0x1E (CHAIN) has no effect either, as it +isn't strictly speaking an event. Filtering the cycle counter is possible +using event 0x11 (CPU_CYCLES). + + +2. GROUP: KVM_ARM_VCPU_TIMER_CTRL +================================= + +:Architectures: ARM, ARM64 + +2.1. ATTRIBUTES: KVM_ARM_VCPU_TIMER_IRQ_VTIMER, KVM_ARM_VCPU_TIMER_IRQ_PTIMER +----------------------------------------------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for the timer interrupt is a + pointer to an int + +Returns: + + ======= ================================= + -EINVAL Invalid timer interrupt number + -EBUSY One or more VCPUs has already run + ======= ================================= + +A value describing the architected timer interrupt number when connected to an +in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the +attribute overrides the default values (see below). + +============================= ========================================== +KVM_ARM_VCPU_TIMER_IRQ_VTIMER The EL1 virtual timer intid (default: 27) +KVM_ARM_VCPU_TIMER_IRQ_PTIMER The EL1 physical timer intid (default: 30) +============================= ========================================== + +Setting the same PPI for different timers will prevent the VCPUs from running. +Setting the interrupt number on a VCPU configures all VCPUs created at that +time to use the number provided for a given timer, overwriting any previously +configured values on other VCPUs. Userspace should configure the interrupt +numbers on at least one VCPU after creating all VCPUs and before running any +VCPUs. + +3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL +================================== + +:Architectures: ARM64 + +3.1 ATTRIBUTE: KVM_ARM_VCPU_PVTIME_IPA +-------------------------------------- + +:Parameters: 64-bit base address + +Returns: + + ======= ====================================== + -ENXIO Stolen time not implemented + -EEXIST Base address already set for this VCPU + -EINVAL Base address not 64 byte aligned + ======= ====================================== + +Specifies the base address of the stolen time structure for this VCPU. The +base address must be 64 byte aligned and exist within a valid guest memory +region. See Documentation/virt/kvm/arm/pvtime.rst for more information +including the layout of the stolen time structure. diff --git a/Documentation/virt/kvm/devices/vfio.rst b/Documentation/virt/kvm/devices/vfio.rst new file mode 100644 index 000000000..2d20dc561 --- /dev/null +++ b/Documentation/virt/kvm/devices/vfio.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +VFIO virtual device +=================== + +Device types supported: + + - KVM_DEV_TYPE_VFIO + +Only one VFIO instance may be created per VM. The created device +tracks VFIO groups in use by the VM and features of those groups +important to the correctness and acceleration of the VM. As groups +are enabled and disabled for use by the VM, KVM should be updated +about their presence. When registered with KVM, a reference to the +VFIO-group is held by KVM. + +Groups: + KVM_DEV_VFIO_GROUP + +KVM_DEV_VFIO_GROUP attributes: + KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking + kvm_device_attr.addr points to an int32_t file descriptor + for the VFIO group. + KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device tracking + kvm_device_attr.addr points to an int32_t file descriptor + for the VFIO group. + KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE: attaches a guest visible TCE table + allocated by sPAPR KVM. + kvm_device_attr.addr points to a struct:: + + struct kvm_vfio_spapr_tce { + __s32 groupfd; + __s32 tablefd; + }; + + where: + + - @groupfd is a file descriptor for a VFIO group; + - @tablefd is a file descriptor for a TCE table allocated via + KVM_CREATE_SPAPR_TCE. diff --git a/Documentation/virt/kvm/devices/vm.rst b/Documentation/virt/kvm/devices/vm.rst new file mode 100644 index 000000000..147efec62 --- /dev/null +++ b/Documentation/virt/kvm/devices/vm.rst @@ -0,0 +1,323 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Generic vm interface +==================== + +The virtual machine "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, +KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same +struct kvm_device_attr as other devices, but targets VM-wide settings +and controls. + +The groups and attributes per virtual machine, if any, are architecture +specific. + +1. GROUP: KVM_S390_VM_MEM_CTRL +============================== + +:Architectures: s390 + +1.1. ATTRIBUTE: KVM_S390_VM_MEM_ENABLE_CMMA +------------------------------------------- + +:Parameters: none +:Returns: -EBUSY if a vcpu is already defined, otherwise 0 + +Enables Collaborative Memory Management Assist (CMMA) for the virtual machine. + +1.2. ATTRIBUTE: KVM_S390_VM_MEM_CLR_CMMA +---------------------------------------- + +:Parameters: none +:Returns: -EINVAL if CMMA was not enabled; + 0 otherwise + +Clear the CMMA status for all guest pages, so any pages the guest marked +as unused are again used any may not be reclaimed by the host. + +1.3. ATTRIBUTE KVM_S390_VM_MEM_LIMIT_SIZE +----------------------------------------- + +:Parameters: in attr->addr the address for the new limit of guest memory +:Returns: -EFAULT if the given address is not accessible; + -EINVAL if the virtual machine is of type UCONTROL; + -E2BIG if the given guest memory is to big for that machine; + -EBUSY if a vcpu is already defined; + -ENOMEM if not enough memory is available for a new shadow guest mapping; + 0 otherwise. + +Allows userspace to query the actual limit and set a new limit for +the maximum guest memory size. The limit will be rounded up to +2048 MB, 4096 GB, 8192 TB respectively, as this limit is governed by +the number of page table levels. In the case that there is no limit we will set +the limit to KVM_S390_NO_MEM_LIMIT (U64_MAX). + +2. GROUP: KVM_S390_VM_CPU_MODEL +=============================== + +:Architectures: s390 + +2.1. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE (r/o) +--------------------------------------------- + +Allows user space to retrieve machine and kvm specific cpu related information:: + + struct kvm_s390_vm_cpu_machine { + __u64 cpuid; # CPUID of host + __u32 ibc; # IBC level range offered by host + __u8 pad[4]; + __u64 fac_mask[256]; # set of cpu facilities enabled by KVM + __u64 fac_list[256]; # set of cpu facilities offered by host + } + +:Parameters: address of buffer to store the machine related cpu data + of type struct kvm_s390_vm_cpu_machine* +:Returns: -EFAULT if the given address is not accessible from kernel space; + -ENOMEM if not enough memory is available to process the ioctl; + 0 in case of success. + +2.2. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR (r/w) +=============================================== + +Allows user space to retrieve or request to change cpu related information for a vcpu:: + + struct kvm_s390_vm_cpu_processor { + __u64 cpuid; # CPUID currently (to be) used by this vcpu + __u16 ibc; # IBC level currently (to be) used by this vcpu + __u8 pad[6]; + __u64 fac_list[256]; # set of cpu facilities currently (to be) used + # by this vcpu + } + +KVM does not enforce or limit the cpu model data in any form. Take the information +retrieved by means of KVM_S390_VM_CPU_MACHINE as hint for reasonable configuration +setups. Instruction interceptions triggered by additionally set facility bits that +are not handled by KVM need to by imlemented in the VM driver code. + +:Parameters: address of buffer to store/set the processor related cpu + data of type struct kvm_s390_vm_cpu_processor*. +:Returns: -EBUSY in case 1 or more vcpus are already activated (only in write case); + -EFAULT if the given address is not accessible from kernel space; + -ENOMEM if not enough memory is available to process the ioctl; + 0 in case of success. + +.. _KVM_S390_VM_CPU_MACHINE_FEAT: + +2.3. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_FEAT (r/o) +-------------------------------------------------- + +Allows user space to retrieve available cpu features. A feature is available if +provided by the hardware and supported by kvm. In theory, cpu features could +even be completely emulated by kvm. + +:: + + struct kvm_s390_vm_cpu_feat { + __u64 feat[16]; # Bitmap (1 = feature available), MSB 0 bit numbering + }; + +:Parameters: address of a buffer to load the feature list from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. + +2.4. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_FEAT (r/w) +---------------------------------------------------- + +Allows user space to retrieve or change enabled cpu features for all VCPUs of a +VM. Features that are not available cannot be enabled. + +See :ref:`KVM_S390_VM_CPU_MACHINE_FEAT` for +a description of the parameter struct. + +:Parameters: address of a buffer to store/load the feature list from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if a cpu feature that is not available is to be enabled; + -EBUSY if at least one VCPU has already been defined; + 0 in case of success. + +.. _KVM_S390_VM_CPU_MACHINE_SUBFUNC: + +2.5. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_SUBFUNC (r/o) +----------------------------------------------------- + +Allows user space to retrieve available cpu subfunctions without any filtering +done by a set IBC. These subfunctions are indicated to the guest VCPU via +query or "test bit" subfunctions and used e.g. by cpacf functions, plo and ptff. + +A subfunction block is only valid if KVM_S390_VM_CPU_MACHINE contains the +STFL(E) bit introducing the affected instruction. If the affected instruction +indicates subfunctions via a "query subfunction", the response block is +contained in the returned struct. If the affected instruction +indicates subfunctions via a "test bit" mechanism, the subfunction codes are +contained in the returned struct in MSB 0 bit numbering. + +:: + + struct kvm_s390_vm_cpu_subfunc { + u8 plo[32]; # always valid (ESA/390 feature) + u8 ptff[16]; # valid with TOD-clock steering + u8 kmac[16]; # valid with Message-Security-Assist + u8 kmc[16]; # valid with Message-Security-Assist + u8 km[16]; # valid with Message-Security-Assist + u8 kimd[16]; # valid with Message-Security-Assist + u8 klmd[16]; # valid with Message-Security-Assist + u8 pckmo[16]; # valid with Message-Security-Assist-Extension 3 + u8 kmctr[16]; # valid with Message-Security-Assist-Extension 4 + u8 kmf[16]; # valid with Message-Security-Assist-Extension 4 + u8 kmo[16]; # valid with Message-Security-Assist-Extension 4 + u8 pcc[16]; # valid with Message-Security-Assist-Extension 4 + u8 ppno[16]; # valid with Message-Security-Assist-Extension 5 + u8 kma[16]; # valid with Message-Security-Assist-Extension 8 + u8 kdsa[16]; # valid with Message-Security-Assist-Extension 9 + u8 reserved[1792]; # reserved for future instructions + }; + +:Parameters: address of a buffer to load the subfunction blocks from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. + +2.6. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_SUBFUNC (r/w) +------------------------------------------------------- + +Allows user space to retrieve or change cpu subfunctions to be indicated for +all VCPUs of a VM. This attribute will only be available if kernel and +hardware support are in place. + +The kernel uses the configured subfunction blocks for indication to +the guest. A subfunction block will only be used if the associated STFL(E) bit +has not been disabled by user space (so the instruction to be queried is +actually available for the guest). + +As long as no data has been written, a read will fail. The IBC will be used +to determine available subfunctions in this case, this will guarantee backward +compatibility. + +See :ref:`KVM_S390_VM_CPU_MACHINE_SUBFUNC` for a +description of the parameter struct. + +:Parameters: address of a buffer to store/load the subfunction blocks from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL when reading, if there was no write yet; + -EBUSY if at least one VCPU has already been defined; + 0 in case of success. + +3. GROUP: KVM_S390_VM_TOD +========================= + +:Architectures: s390 + +3.1. ATTRIBUTE: KVM_S390_VM_TOD_HIGH +------------------------------------ + +Allows user space to set/get the TOD clock extension (u8) (superseded by +KVM_S390_VM_TOD_EXT). + +:Parameters: address of a buffer in user space to store the data (u8) to +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW +----------------------------------- + +Allows user space to set/get bits 0-63 of the TOD clock register as defined in +the POP (u64). + +:Parameters: address of a buffer in user space to store the data (u64) to +:Returns: -EFAULT if the given address is not accessible from kernel space + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT +----------------------------------- + +Allows user space to set/get bits 0-63 of the TOD clock register as defined in +the POP (u64). If the guest CPU model supports the TOD clock extension (u8), it +also allows user space to get/set it. If the guest CPU model does not support +it, it is stored as 0 and not allowed to be set to a value != 0. + +:Parameters: address of a buffer in user space to store the data + (kvm_s390_vm_tod_clock) to +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +4. GROUP: KVM_S390_VM_CRYPTO +============================ + +:Architectures: s390 + +4.1. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_AES_KW (w/o) +------------------------------------------------------ + +Allows user space to enable aes key wrapping, including generating a new +wrapping key. + +:Parameters: none +:Returns: 0 + +4.2. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_DEA_KW (w/o) +------------------------------------------------------ + +Allows user space to enable dea key wrapping, including generating a new +wrapping key. + +:Parameters: none +:Returns: 0 + +4.3. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_AES_KW (w/o) +------------------------------------------------------- + +Allows user space to disable aes key wrapping, clearing the wrapping key. + +:Parameters: none +:Returns: 0 + +4.4. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_DEA_KW (w/o) +------------------------------------------------------- + +Allows user space to disable dea key wrapping, clearing the wrapping key. + +:Parameters: none +:Returns: 0 + +5. GROUP: KVM_S390_VM_MIGRATION +=============================== + +:Architectures: s390 + +5.1. ATTRIBUTE: KVM_S390_VM_MIGRATION_STOP (w/o) +------------------------------------------------ + +Allows userspace to stop migration mode, needed for PGSTE migration. +Setting this attribute when migration mode is not active will have no +effects. + +:Parameters: none +:Returns: 0 + +5.2. ATTRIBUTE: KVM_S390_VM_MIGRATION_START (w/o) +------------------------------------------------- + +Allows userspace to start migration mode, needed for PGSTE migration. +Setting this attribute when migration mode is already active will have +no effects. + +Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When +dirty tracking is disabled on any memslot, migration mode is automatically +stopped. + +:Parameters: none +:Returns: -ENOMEM if there is not enough free memory to start migration mode; + -EINVAL if the state of the VM is invalid (e.g. no memory defined); + 0 in case of success. + +5.3. ATTRIBUTE: KVM_S390_VM_MIGRATION_STATUS (r/o) +-------------------------------------------------- + +Allows userspace to query the status of migration mode. + +:Parameters: address of a buffer in user space to store the data (u64) to; + the data itself is either 0 if migration mode is disabled or 1 + if it is enabled +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. diff --git a/Documentation/virt/kvm/devices/xics.rst b/Documentation/virt/kvm/devices/xics.rst new file mode 100644 index 000000000..2d6927e0b --- /dev/null +++ b/Documentation/virt/kvm/devices/xics.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +XICS interrupt controller +========================= + +Device type supported: KVM_DEV_TYPE_XICS + +Groups: + 1. KVM_DEV_XICS_GRP_SOURCES + Attributes: + + One per interrupt source, indexed by the source number. + 2. KVM_DEV_XICS_GRP_CTRL + Attributes: + + 2.1 KVM_DEV_XICS_NR_SERVERS (write only) + + The kvm_device_attr.addr points to a __u32 value which is the number of + interrupt server numbers (ie, highest possible vcpu id plus one). + + Errors: + + ======= ========================================== + -EINVAL Value greater than KVM_MAX_VCPU_ID. + -EFAULT Invalid user pointer for attr->addr. + -EBUSY A vcpu is already connected to the device. + ======= ========================================== + +This device emulates the XICS (eXternal Interrupt Controller +Specification) defined in PAPR. The XICS has a set of interrupt +sources, each identified by a 20-bit source number, and a set of +Interrupt Control Presentation (ICP) entities, also called "servers", +each associated with a virtual CPU. + +The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH +capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and +the interrupt server number (i.e. the vcpu number from the XICS's +point of view) in args[1] of the kvm_enable_cap struct. Each ICP has +64 bits of state which can be read and written using the +KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit +state word has the following bitfields, starting at the +least-significant end of the word: + +* Unused, 16 bits + +* Pending interrupt priority, 8 bits + Zero is the highest priority, 255 means no interrupt is pending. + +* Pending IPI (inter-processor interrupt) priority, 8 bits + Zero is the highest priority, 255 means no IPI is pending. + +* Pending interrupt source number, 24 bits + Zero means no interrupt pending, 2 means an IPI is pending + +* Current processor priority, 8 bits + Zero is the highest priority, meaning no interrupts can be + delivered, and 255 is the lowest priority. + +Each source has 64 bits of state that can be read and written using +the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the +KVM_DEV_XICS_GRP_SOURCES attribute group, with the attribute number being +the interrupt source number. The 64 bit state word has the following +bitfields, starting from the least-significant end of the word: + +* Destination (server number), 32 bits + + This specifies where the interrupt should be sent, and is the + interrupt server number specified for the destination vcpu. + +* Priority, 8 bits + + This is the priority specified for this interrupt source, where 0 is + the highest priority and 255 is the lowest. An interrupt with a + priority of 255 will never be delivered. + +* Level sensitive flag, 1 bit + + This bit is 1 for a level-sensitive interrupt source, or 0 for + edge-sensitive (or MSI). + +* Masked flag, 1 bit + + This bit is set to 1 if the interrupt is masked (cannot be delivered + regardless of its priority), for example by the ibm,int-off RTAS + call, or 0 if it is not masked. + +* Pending flag, 1 bit + + This bit is 1 if the source has a pending interrupt, otherwise 0. + +Only one XICS instance may be created per VM. diff --git a/Documentation/virt/kvm/devices/xive.rst b/Documentation/virt/kvm/devices/xive.rst new file mode 100644 index 000000000..8bdf3dc38 --- /dev/null +++ b/Documentation/virt/kvm/devices/xive.rst @@ -0,0 +1,247 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================================== +POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1) +=========================================================== + +Device types supported: + - KVM_DEV_TYPE_XIVE POWER9 XIVE Interrupt Controller generation 1 + +This device acts as a VM interrupt controller. It provides the KVM +interface to configure the interrupt sources of a VM in the underlying +POWER9 XIVE interrupt controller. + +Only one XIVE instance may be instantiated. A guest XIVE device +requires a POWER9 host and the guest OS should have support for the +XIVE native exploitation interrupt mode. If not, it should run using +the legacy interrupt mode, referred as XICS (POWER7/8). + +* Device Mappings + + The KVM device exposes different MMIO ranges of the XIVE HW which + are required for interrupt management. These are exposed to the + guest in VMAs populated with a custom VM fault handler. + + 1. Thread Interrupt Management Area (TIMA) + + Each thread has an associated Thread Interrupt Management context + composed of a set of registers. These registers let the thread + handle priority management and interrupt acknowledgment. The most + important are : + + - Interrupt Pending Buffer (IPB) + - Current Processor Priority (CPPR) + - Notification Source Register (NSR) + + They are exposed to software in four different pages each proposing + a view with a different privilege. The first page is for the + physical thread context and the second for the hypervisor. Only the + third (operating system) and the fourth (user level) are exposed the + guest. + + 2. Event State Buffer (ESB) + + Each source is associated with an Event State Buffer (ESB) with + either a pair of even/odd pair of pages which provides commands to + manage the source: to trigger, to EOI, to turn off the source for + instance. + + 3. Device pass-through + + When a device is passed-through into the guest, the source + interrupts are from a different HW controller (PHB4) and the ESB + pages exposed to the guest should accommadate this change. + + The passthru_irq helpers, kvmppc_xive_set_mapped() and + kvmppc_xive_clr_mapped() are called when the device HW irqs are + mapped into or unmapped from the guest IRQ number space. The KVM + device extends these helpers to clear the ESB pages of the guest IRQ + number being mapped and then lets the VM fault handler repopulate. + The handler will insert the ESB page corresponding to the HW + interrupt of the device being passed-through or the initial IPI ESB + page if the device has being removed. + + The ESB remapping is fully transparent to the guest and the OS + device driver. All handling is done within VFIO and the above + helpers in KVM-PPC. + +* Groups: + +1. KVM_DEV_XIVE_GRP_CTRL + Provides global controls on the device + + Attributes: + 1.1 KVM_DEV_XIVE_RESET (write only) + Resets the interrupt controller configuration for sources and event + queues. To be used by kexec and kdump. + + Errors: none + + 1.2 KVM_DEV_XIVE_EQ_SYNC (write only) + Sync all the sources and queues and mark the EQ pages dirty. This + to make sure that a consistent memory state is captured when + migrating the VM. + + Errors: none + + 1.3 KVM_DEV_XIVE_NR_SERVERS (write only) + The kvm_device_attr.addr points to a __u32 value which is the number of + interrupt server numbers (ie, highest possible vcpu id plus one). + + Errors: + + ======= ========================================== + -EINVAL Value greater than KVM_MAX_VCPU_ID. + -EFAULT Invalid user pointer for attr->addr. + -EBUSY A vCPU is already connected to the device. + ======= ========================================== + +2. KVM_DEV_XIVE_GRP_SOURCE (write only) + Initializes a new source in the XIVE device and mask it. + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 2 | 1 | 0 + values: | unused | level | type + + - type: 0:MSI 1:LSI + - level: assertion level in case of an LSI. + + Errors: + + ======= ========================================== + -E2BIG Interrupt source number is out of range + -ENOMEM Could not create a new source block + -EFAULT Invalid user pointer for attr->addr. + -ENXIO Could not allocate underlying HW interrupt + ======= ========================================== + +3. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only) + Configures source targeting + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 33 | 32 | 31 .. 3 | 2 .. 0 + values: | eisn | mask | server | priority + + - priority: 0-7 interrupt priority level + - server: CPU number chosen to handle the interrupt + - mask: mask flag (unused) + - eisn: Effective Interrupt Source Number + + Errors: + + ======= ======================================================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + -EINVAL Invalid priority + -EINVAL Invalid CPU number. + -EFAULT Invalid user pointer for attr->addr. + -ENXIO CPU event queues not configured or configuration of the + underlying HW interrupt failed + -EBUSY No CPU available to serve interrupt + ======= ======================================================= + +4. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write) + Configures an event queue of a CPU + + Attributes: + EQ descriptor identifier (64-bit) + + The EQ descriptor identifier is a tuple (server, priority):: + + bits: | 63 .... 32 | 31 .. 3 | 2 .. 0 + values: | unused | server | priority + + The kvm_device_attr.addr points to:: + + struct kvm_ppc_xive_eq { + __u32 flags; + __u32 qshift; + __u64 qaddr; + __u32 qtoggle; + __u32 qindex; + __u8 pad[40]; + }; + + - flags: queue flags + KVM_XIVE_EQ_ALWAYS_NOTIFY (required) + forces notification without using the coalescing mechanism + provided by the XIVE END ESBs. + - qshift: queue size (power of 2) + - qaddr: real address of queue + - qtoggle: current queue toggle bit + - qindex: current queue index + - pad: reserved for future use + + Errors: + + ======= ========================================= + -ENOENT Invalid CPU number + -EINVAL Invalid priority + -EINVAL Invalid flags + -EINVAL Invalid queue size + -EINVAL Invalid queue address + -EFAULT Invalid user pointer for attr->addr. + -EIO Configuration of the underlying HW failed + ======= ========================================= + +5. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only) + Synchronize the source to flush event notifications + + Attributes: + Interrupt source number (64-bit) + + Errors: + + ======= ============================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + ======= ============================= + +* VCPU state + + The XIVE IC maintains VP interrupt state in an internal structure + called the NVT. When a VP is not dispatched on a HW processor + thread, this structure can be updated by HW if the VP is the target + of an event notification. + + It is important for migration to capture the cached IPB from the NVT + as it synthesizes the priorities of the pending interrupts. We + capture a bit more to report debug information. + + KVM_REG_PPC_VP_STATE (2 * 64bits):: + + bits: | 63 .... 32 | 31 .... 0 | + values: | TIMA word0 | TIMA word1 | + bits: | 127 .......... 64 | + values: | unused | + +* Migration: + + Saving the state of a VM using the XIVE native exploitation mode + should follow a specific sequence. When the VM is stopped : + + 1. Mask all sources (PQ=01) to stop the flow of events. + + 2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to + flush any in-flight event notification and to stabilize the EQs. At + this stage, the EQ pages are marked dirty to make sure they are + transferred in the migration sequence. + + 3. Capture the state of the source targeting, the EQs configuration + and the state of thread interrupt context registers. + + Restore is similar: + + 1. Restore the EQ configuration. As targeting depends on it. + 2. Restore targeting + 3. Restore the thread interrupt contexts + 4. Restore the source states + 5. Let the vCPU run -- cgit v1.2.3