From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- arch/mips/sibyte/Kconfig | 167 +++++++++ arch/mips/sibyte/Makefile | 29 ++ arch/mips/sibyte/Platform | 40 +++ arch/mips/sibyte/bcm1480/Makefile | 4 + arch/mips/sibyte/bcm1480/irq.c | 348 +++++++++++++++++++ arch/mips/sibyte/bcm1480/setup.c | 128 +++++++ arch/mips/sibyte/bcm1480/smp.c | 179 ++++++++++ arch/mips/sibyte/bcm1480/time.c | 14 + arch/mips/sibyte/common/Makefile | 6 + arch/mips/sibyte/common/bus_watcher.c | 228 +++++++++++++ arch/mips/sibyte/common/cfe.c | 330 ++++++++++++++++++ arch/mips/sibyte/common/cfe_console.c | 81 +++++ arch/mips/sibyte/common/dma.c | 14 + arch/mips/sibyte/common/sb_tbprof.c | 595 +++++++++++++++++++++++++++++++++ arch/mips/sibyte/sb1250/Makefile | 4 + arch/mips/sibyte/sb1250/irq.c | 324 ++++++++++++++++++ arch/mips/sibyte/sb1250/setup.c | 234 +++++++++++++ arch/mips/sibyte/sb1250/smp.c | 168 ++++++++++ arch/mips/sibyte/sb1250/time.c | 14 + arch/mips/sibyte/swarm/Makefile | 5 + arch/mips/sibyte/swarm/platform.c | 140 ++++++++ arch/mips/sibyte/swarm/rtc_m41t81.c | 228 +++++++++++++ arch/mips/sibyte/swarm/rtc_xicor1241.c | 206 ++++++++++++ arch/mips/sibyte/swarm/setup.c | 171 ++++++++++ arch/mips/sibyte/swarm/swarm-i2c.c | 31 ++ 25 files changed, 3688 insertions(+) create mode 100644 arch/mips/sibyte/Kconfig create mode 100644 arch/mips/sibyte/Makefile create mode 100644 arch/mips/sibyte/Platform create mode 100644 arch/mips/sibyte/bcm1480/Makefile create mode 100644 arch/mips/sibyte/bcm1480/irq.c create mode 100644 arch/mips/sibyte/bcm1480/setup.c create mode 100644 arch/mips/sibyte/bcm1480/smp.c create mode 100644 arch/mips/sibyte/bcm1480/time.c create mode 100644 arch/mips/sibyte/common/Makefile create mode 100644 arch/mips/sibyte/common/bus_watcher.c create mode 100644 arch/mips/sibyte/common/cfe.c create mode 100644 arch/mips/sibyte/common/cfe_console.c create mode 100644 arch/mips/sibyte/common/dma.c create mode 100644 arch/mips/sibyte/common/sb_tbprof.c create mode 100644 arch/mips/sibyte/sb1250/Makefile create mode 100644 arch/mips/sibyte/sb1250/irq.c create mode 100644 arch/mips/sibyte/sb1250/setup.c create mode 100644 arch/mips/sibyte/sb1250/smp.c create mode 100644 arch/mips/sibyte/sb1250/time.c create mode 100644 arch/mips/sibyte/swarm/Makefile create mode 100644 arch/mips/sibyte/swarm/platform.c create mode 100644 arch/mips/sibyte/swarm/rtc_m41t81.c create mode 100644 arch/mips/sibyte/swarm/rtc_xicor1241.c create mode 100644 arch/mips/sibyte/swarm/setup.c create mode 100644 arch/mips/sibyte/swarm/swarm-i2c.c (limited to 'arch/mips/sibyte') diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig new file mode 100644 index 000000000..470d46183 --- /dev/null +++ b/arch/mips/sibyte/Kconfig @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0 +config SIBYTE_SB1250 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HAVE_PCI + select IRQ_MIPS_CPU + select SIBYTE_ENABLE_LDT_IF_PCI + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + select SYS_SUPPORTS_SMP + +config SIBYTE_BCM1120 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select IRQ_MIPS_CPU + select SIBYTE_BCM112X + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125 + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HAVE_PCI + select IRQ_MIPS_CPU + select SIBYTE_BCM112X + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM1125H + bool + select CEVT_SB1250 + select CSRC_SB1250 + select HAVE_PCI + select IRQ_MIPS_CPU + select SIBYTE_BCM112X + select SIBYTE_ENABLE_LDT_IF_PCI + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + +config SIBYTE_BCM112X + bool + select CEVT_SB1250 + select CSRC_SB1250 + select IRQ_MIPS_CPU + select SIBYTE_SB1xxx_SOC + select SIBYTE_HAS_ZBUS_PROFILING + +config SIBYTE_BCM1x80 + bool + select CEVT_BCM1480 + select CSRC_BCM1480 + select HAVE_PCI + select IRQ_MIPS_CPU + select SIBYTE_HAS_ZBUS_PROFILING + select SIBYTE_SB1xxx_SOC + select SYS_SUPPORTS_SMP + +config SIBYTE_BCM1x55 + bool + select CEVT_BCM1480 + select CSRC_BCM1480 + select HAVE_PCI + select IRQ_MIPS_CPU + select SIBYTE_SB1xxx_SOC + select SIBYTE_HAS_ZBUS_PROFILING + select SYS_SUPPORTS_SMP + +config SIBYTE_SB1xxx_SOC + bool + select IRQ_MIPS_CPU + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select FW_CFE + select SYS_HAS_EARLY_PRINTK + +choice + prompt "SiByte SOC Stepping" + depends on SIBYTE_SB1xxx_SOC + +config CPU_SB1_PASS_2_1250 + bool "1250 An" + depends on SIBYTE_SB1250 + select CPU_SB1_PASS_2 + help + Also called BCM1250 Pass 2 + +config CPU_SB1_PASS_2_2 + bool "1250 Bn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 2.2 + +config CPU_SB1_PASS_4 + bool "1250 Cn" + depends on SIBYTE_SB1250 + select CPU_HAS_PREFETCH + help + Also called BCM1250 Pass 3 + +config CPU_SB1_PASS_2_112x + bool "112x Hybrid" + depends on SIBYTE_BCM112X + select CPU_SB1_PASS_2 + +config CPU_SB1_PASS_3 + bool "112x An" + depends on SIBYTE_BCM112X + select CPU_HAS_PREFETCH + +endchoice + +config CPU_SB1_PASS_2 + bool + +config SIBYTE_HAS_LDT + bool + +config SIBYTE_ENABLE_LDT_IF_PCI + bool + select SIBYTE_HAS_LDT if PCI + +config SB1_CEX_ALWAYS_FATAL + bool "All cache exceptions considered fatal (no recovery attempted)" + depends on SIBYTE_SB1xxx_SOC + +config SB1_CERR_STALL + bool "Stall (rather than panic) on fatal cache error" + depends on SIBYTE_SB1xxx_SOC + +config SIBYTE_CFE_CONSOLE + bool "Use firmware console" + depends on SIBYTE_SB1xxx_SOC + help + Use the CFE API's console write routines during boot. Other console + options (VT console, sb1250 duart console, etc.) should not be + configured. + +config SIBYTE_BUS_WATCHER + bool "Support for Bus Watcher statistics" + depends on SIBYTE_SB1xxx_SOC && \ + (SIBYTE_BCM112X || SIBYTE_SB1250 || \ + SIBYTE_BCM1x55 || SIBYTE_BCM1x80) + help + Handle and keep statistics on the bus error interrupts (COR_ECC, + BAD_ECC, IO_BUS). + +config SIBYTE_BW_TRACE + bool "Capture bus trace before bus error" + depends on SIBYTE_BUS_WATCHER + help + Run a continuous bus trace, dumping the raw data as soon as + a ZBbus error is detected. Cannot work if ZBbus profiling + is turned on, and also will interfere with JTAG-based trace + buffer activity. Raw buffer data is dumped to console, and + must be processed off-line. + +config SIBYTE_TBPROF + tristate "Support for ZBbus profiling" + depends on SIBYTE_HAS_ZBUS_PROFILING + +config SIBYTE_HAS_ZBUS_PROFILING + bool diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile new file mode 100644 index 000000000..d015c4d79 --- /dev/null +++ b/arch/mips/sibyte/Makefile @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Sibyte SB1250 / BCM1480 family of SOCs +# +obj-$(CONFIG_SIBYTE_BCM112X) += sb1250/ +obj-$(CONFIG_SIBYTE_BCM112X) += common/ +obj-$(CONFIG_SIBYTE_SB1250) += sb1250/ +obj-$(CONFIG_SIBYTE_SB1250) += common/ +obj-$(CONFIG_SIBYTE_BCM1x55) += bcm1480/ +obj-$(CONFIG_SIBYTE_BCM1x55) += common/ +obj-$(CONFIG_SIBYTE_BCM1x80) += bcm1480/ +obj-$(CONFIG_SIBYTE_BCM1x80) += common/ + +# +# Sibyte BCM91120x (Carmel) board +# Sibyte BCM91120C (CRhine) board +# Sibyte BCM91125C (CRhone) board +# Sibyte BCM91125E (Rhone) board +# Sibyte SWARM board +# Sibyte BCM91x80 (BigSur) board +# +obj-$(CONFIG_SIBYTE_CARMEL) += swarm/ +obj-$(CONFIG_SIBYTE_CRHINE) += swarm/ +obj-$(CONFIG_SIBYTE_CRHONE) += swarm/ +obj-$(CONFIG_SIBYTE_RHONE) += swarm/ +obj-$(CONFIG_SIBYTE_SENTOSA) += swarm/ +obj-$(CONFIG_SIBYTE_SWARM) += swarm/ +obj-$(CONFIG_SIBYTE_BIGSUR) += swarm/ +obj-$(CONFIG_SIBYTE_LITTLESUR) += swarm/ diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform new file mode 100644 index 000000000..65b2225b7 --- /dev/null +++ b/arch/mips/sibyte/Platform @@ -0,0 +1,40 @@ +# +# These are all rather similar so we consider them a single platform +# + +# +# Sibyte SB1250 / BCM1480 family of SOCs +# +cflags-$(CONFIG_SIBYTE_BCM112X) += \ + -I$(srctree)/arch/mips/include/asm/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL + +cflags-$(CONFIG_SIBYTE_SB1250) += \ + -I$(srctree)/arch/mips/include/asm/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL + +cflags-$(CONFIG_SIBYTE_BCM1x55) += \ + -I$(srctree)/arch/mips/include/asm/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL + +cflags-$(CONFIG_SIBYTE_BCM1x80) += \ + -I$(srctree)/arch/mips/include/asm/mach-sibyte \ + -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL + +# +# Sibyte BCM91120x (Carmel) board +# Sibyte BCM91120C (CRhine) board +# Sibyte BCM91125C (CRhone) board +# Sibyte BCM91125E (Rhone) board +# Sibyte BCM91250A (SWARM) board +# Sibyte BCM91250C2 (LittleSur) board +# Sibyte BCM91x80 (BigSur) board +# +load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 +load-$(CONFIG_SIBYTE_LITTLESUR) := 0xffffffff80100000 diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile new file mode 100644 index 000000000..cf1327d3f --- /dev/null +++ b/arch/mips/sibyte/bcm1480/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y := setup.o irq.o time.o + +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c new file mode 100644 index 000000000..7929bee91 --- /dev/null +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +/* + * These are the routines that handle all the low level interrupt stuff. + * Actions handled here are: initialization of the interrupt map, requesting of + * interrupt lines by handlers, dispatching if interrupts to handlers, probing + * for interrupt lines + */ + +#ifdef CONFIG_PCI +extern unsigned long ht_eoi_space; +#endif + +/* Store the CPU id (not the logical number) */ +int bcm1480_irq_owner[BCM1480_NR_IRQS]; + +static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock); + +void bcm1480_mask_irq(int cpu, int irq) +{ + unsigned long flags, hl_spacing; + u64 cur_ints; + + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); + hl_spacing = 0; + if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { + hl_spacing = BCM1480_IMR_HL_SPACING; + irq -= BCM1480_NR_IRQS_HALF; + } + cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); + cur_ints |= (((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); +} + +void bcm1480_unmask_irq(int cpu, int irq) +{ + unsigned long flags, hl_spacing; + u64 cur_ints; + + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); + hl_spacing = 0; + if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { + hl_spacing = BCM1480_IMR_HL_SPACING; + irq -= BCM1480_NR_IRQS_HALF; + } + cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); + cur_ints &= ~(((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); +} + +#ifdef CONFIG_SMP +static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask, + bool force) +{ + unsigned int irq_dirty, irq = d->irq; + int i = 0, old_cpu, cpu, int_on, k; + u64 cur_ints; + unsigned long flags; + + i = cpumask_first_and(mask, cpu_online_mask); + + /* Convert logical CPU to physical CPU */ + cpu = cpu_logical_map(i); + + /* Protect against other affinity changers and IMR manipulation */ + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); + + /* Swizzle each CPU's IMR (but leave the IP selection alone) */ + old_cpu = bcm1480_irq_owner[irq]; + irq_dirty = irq; + if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { + irq_dirty -= BCM1480_NR_IRQS_HALF; + } + + for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */ + cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); + int_on = !(cur_ints & (((u64) 1) << irq_dirty)); + if (int_on) { + /* If it was on, mask it */ + cur_ints |= (((u64) 1) << irq_dirty); + ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); + } + bcm1480_irq_owner[irq] = cpu; + if (int_on) { + /* unmask for the new CPU */ + cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); + cur_ints &= ~(((u64) 1) << irq_dirty); + ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); + } + } + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); + + return 0; +} +#endif + + +/*****************************************************************************/ + +static void disable_bcm1480_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + bcm1480_mask_irq(bcm1480_irq_owner[irq], irq); +} + +static void enable_bcm1480_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq); +} + + +static void ack_bcm1480_irq(struct irq_data *d) +{ + unsigned int irq_dirty, irq = d->irq; + u64 pending; + int k; + + /* + * If the interrupt was an HT interrupt, now is the time to + * clear it. NOTE: we assume the HT bridge was set up to + * deliver the interrupts to all CPUs (which makes affinity + * changing easier for us) + */ + irq_dirty = irq; + if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { + irq_dirty -= BCM1480_NR_IRQS_HALF; + } + for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */ + pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq], + R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING)))); + pending &= ((u64)1 << (irq_dirty)); + if (pending) { +#ifdef CONFIG_SMP + int i; + for (i=0; i +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +unsigned int sb1_pass; +unsigned int soc_pass; +unsigned int soc_type; +EXPORT_SYMBOL(soc_type); +unsigned int periph_rev; +EXPORT_SYMBOL_GPL(periph_rev); +unsigned int zbbus_mhz; +EXPORT_SYMBOL(zbbus_mhz); + +static unsigned int part_type; + +static char *soc_str; +static char *pass_str; + +static int __init setup_bcm1x80_bcm1x55(void) +{ + int ret = 0; + + switch (soc_pass) { + case K_SYS_REVISION_BCM1480_S0: + periph_rev = 1; + pass_str = "S0 (pass1)"; + break; + case K_SYS_REVISION_BCM1480_A1: + periph_rev = 1; + pass_str = "A1 (pass1)"; + break; + case K_SYS_REVISION_BCM1480_A2: + periph_rev = 1; + pass_str = "A2 (pass1)"; + break; + case K_SYS_REVISION_BCM1480_A3: + periph_rev = 1; + pass_str = "A3 (pass1)"; + break; + case K_SYS_REVISION_BCM1480_B0: + periph_rev = 1; + pass_str = "B0 (pass2)"; + break; + default: + printk("Unknown %s rev %x\n", soc_str, soc_pass); + periph_rev = 1; + pass_str = "Unknown Revision"; + break; + } + + return ret; +} + +/* Setup code likely to be common to all SiByte platforms */ + +static int __init sys_rev_decode(void) +{ + int ret = 0; + + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1x80: + if (part_type == K_SYS_PART_BCM1480) + soc_str = "BCM1480"; + else if (part_type == K_SYS_PART_BCM1280) + soc_str = "BCM1280"; + else + soc_str = "BCM1x80"; + ret = setup_bcm1x80_bcm1x55(); + break; + + case K_SYS_SOC_TYPE_BCM1x55: + if (part_type == K_SYS_PART_BCM1455) + soc_str = "BCM1455"; + else if (part_type == K_SYS_PART_BCM1255) + soc_str = "BCM1255"; + else + soc_str = "BCM1x55"; + ret = setup_bcm1x80_bcm1x55(); + break; + + default: + printk("Unknown part type %x\n", part_type); + ret = 1; + break; + } + + return ret; +} + +void __init bcm1480_setup(void) +{ + uint64_t sys_rev; + int plldiv; + + sb1_pass = read_c0_prid() & PRID_REV_MASK; + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + soc_type = SYS_SOC_TYPE(sys_rev); + part_type = G_SYS_PART(sys_rev); + soc_pass = G_SYS_REVISION(sys_rev); + + if (sys_rev_decode()) { + printk("Restart after failure to identify SiByte chip\n"); + machine_restart(NULL); + } + + plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); + + printk("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n", + soc_str, pass_str, zbbus_mhz * 2, sb1_pass); + printk("Board type: %s\n", get_system_type()); +} diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c new file mode 100644 index 000000000..5861e5025 --- /dev/null +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001,2002,2004 Broadcom Corporation + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* + * These are routines for dealing with the bcm1480 smp capabilities + * independent of board/firmware + */ + +static void *mailbox_0_set_regs[] = { + IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), + IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), + IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), + IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), +}; + +static void *mailbox_0_clear_regs[] = { + IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), + IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), + IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), + IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), +}; + +static void *mailbox_0_regs[] = { + IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), + IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), + IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), + IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), +}; + +/* + * SMP init and finish on secondary CPUs + */ +void bcm1480_smp_init(void) +{ + unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | + STATUSF_IP1 | STATUSF_IP0; + + /* Set interrupt mask, but don't enable */ + change_c0_status(ST0_IM, imask); +} + +/* + * These are routines for dealing with the sb1250 smp capabilities + * independent of board/firmware + */ + +/* + * Simple enough; everything is set up, so just poke the appropriate mailbox + * register, and we should be set + */ +static void bcm1480_send_ipi_single(int cpu, unsigned int action) +{ + __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]); +} + +static void bcm1480_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + bcm1480_send_ipi_single(i, action); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void bcm1480_init_secondary(void) +{ + extern void bcm1480_smp_init(void); + + bcm1480_smp_init(); +} + +/* + * Do any tidying up before marking online and running the idle + * loop + */ +static void bcm1480_smp_finish(void) +{ + extern void sb1480_clockevent_init(void); + + sb1480_clockevent_init(); + local_irq_enable(); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + */ +static int bcm1480_boot_secondary(int cpu, struct task_struct *idle) +{ + int retval; + + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, + __KSTK_TOS(idle), + (unsigned long)task_thread_info(idle), 0); + if (retval != 0) + printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); + return retval; +} + +/* + * Use CFE to find out how many CPUs are available, setting up + * cpu_possible_mask and the logical/physical mappings. + * XXXKW will the boot CPU ever not be physical 0? + * + * Common setup before any secondaries are started + */ +static void __init bcm1480_smp_setup(void) +{ + int i, num; + + init_cpu_possible(cpumask_of(0)); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + for (i = 1, num = 0; i < NR_CPUS; i++) { + if (cfe_cpu_stop(i) == 0) { + set_cpu_possible(i, true); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +static void __init bcm1480_prepare_cpus(unsigned int max_cpus) +{ +} + +const struct plat_smp_ops bcm1480_smp_ops = { + .send_ipi_single = bcm1480_send_ipi_single, + .send_ipi_mask = bcm1480_send_ipi_mask, + .init_secondary = bcm1480_init_secondary, + .smp_finish = bcm1480_smp_finish, + .boot_secondary = bcm1480_boot_secondary, + .smp_setup = bcm1480_smp_setup, + .prepare_cpus = bcm1480_prepare_cpus, +}; + +void bcm1480_mailbox_interrupt(void) +{ + int cpu = smp_processor_id(); + int irq = K_BCM1480_INT_MBOX_0_0; + unsigned int action; + + kstat_incr_irq_this_cpu(irq); + /* Load the mailbox register to figure out what we're supposed to do */ + action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff; + + /* Clear the mailbox to clear the interrupt */ + __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + + if (action & SMP_CALL_FUNCTION) { + irq_enter(); + generic_smp_call_function_interrupt(); + irq_exit(); + } +} diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c new file mode 100644 index 000000000..e6450d79f --- /dev/null +++ b/arch/mips/sibyte/bcm1480/time.c @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000,2001,2004 Broadcom Corporation + */ +#include + +extern void sb1480_clockevent_init(void); +extern void sb1480_clocksource_init(void); + +void __init plat_time_init(void) +{ + sb1480_clocksource_init(); + sb1480_clockevent_init(); +} diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile new file mode 100644 index 000000000..57f670aa1 --- /dev/null +++ b/arch/mips/sibyte/common/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y := cfe.o +obj-$(CONFIG_SWIOTLB) += dma.o +obj-$(CONFIG_SIBYTE_BUS_WATCHER) += bus_watcher.o +obj-$(CONFIG_SIBYTE_CFE_CONSOLE) += cfe_console.o +obj-$(CONFIG_SIBYTE_TBPROF) += sb_tbprof.o diff --git a/arch/mips/sibyte/common/bus_watcher.c b/arch/mips/sibyte/common/bus_watcher.c new file mode 100644 index 000000000..d43291473 --- /dev/null +++ b/arch/mips/sibyte/common/bus_watcher.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2002,2003 Broadcom Corporation + */ + +/* + * The Bus Watcher monitors internal bus transactions and maintains + * counts of transactions with error status, logging details and + * causing one of several interrupts. This driver provides a handler + * for those interrupts which aggregates the counts (to avoid + * saturating the 8-bit counters) and provides a presence in + * /proc/bus_watcher if PROC_FS is on. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include +#endif + + +struct bw_stats_struct { + uint64_t status; + uint32_t l2_err; + uint32_t memio_err; + int status_printed; + unsigned long l2_cor_d; + unsigned long l2_bad_d; + unsigned long l2_cor_t; + unsigned long l2_bad_t; + unsigned long mem_cor_d; + unsigned long mem_bad_d; + unsigned long bus_error; +} bw_stats; + + +static void print_summary(uint32_t status, uint32_t l2_err, + uint32_t memio_err) +{ + printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); + printk("\nLast recorded signature:\n"); + printk("Request %02x from %d, answered by %d with Dcode %d\n", + (unsigned int)(G_SCD_BERR_TID(status) & 0x3f), + (int)(G_SCD_BERR_TID(status) >> 6), + (int)G_SCD_BERR_RID(status), + (int)G_SCD_BERR_DCODE(status)); +} + +/* + * check_bus_watcher is exported for use in situations where we want + * to see the most recent status of the bus watcher, which might have + * already been destructively read out of the registers. + * + * notes: this is currently used by the cache error handler + * should provide locking against the interrupt handler + */ +void check_bus_watcher(void) +{ + u32 status, l2_err, memio_err; + +#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) + /* Use non-destructive register */ + status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG)); +#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + /* Use non-destructive register */ + /* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ + status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG)); +#else +#error bus watcher being built for unknown Sibyte SOC! +#endif + if (!(status & 0x7fffffff)) { + printk("Using last values reaped by bus watcher driver\n"); + status = bw_stats.status; + l2_err = bw_stats.l2_err; + memio_err = bw_stats.memio_err; + } else { + l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS)); + memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); + } + if (status & ~(1UL << 31)) + print_summary(status, l2_err, memio_err); + else + printk("Bus watcher indicates no error\n"); +} + +#ifdef CONFIG_PROC_FS + +/* For simplicity, I want to assume a single read is required each + time */ +static int bw_proc_show(struct seq_file *m, void *v) +{ + struct bw_stats_struct *stats = m->private; + + seq_puts(m, "SiByte Bus Watcher statistics\n"); + seq_puts(m, "-----------------------------\n"); + seq_printf(m, "L2-d-cor %8ld\nL2-d-bad %8ld\n", + stats->l2_cor_d, stats->l2_bad_d); + seq_printf(m, "L2-t-cor %8ld\nL2-t-bad %8ld\n", + stats->l2_cor_t, stats->l2_bad_t); + seq_printf(m, "MC-d-cor %8ld\nMC-d-bad %8ld\n", + stats->mem_cor_d, stats->mem_bad_d); + seq_printf(m, "IO-err %8ld\n", stats->bus_error); + seq_puts(m, "\nLast recorded signature:\n"); + seq_printf(m, "Request %02x from %d, answered by %d with Dcode %d\n", + (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f), + (int)(G_SCD_BERR_TID(stats->status) >> 6), + (int)G_SCD_BERR_RID(stats->status), + (int)G_SCD_BERR_DCODE(stats->status)); + /* XXXKW indicate multiple errors between printings, or stats + collection (or both)? */ + if (stats->status & M_SCD_BERR_MULTERRS) + seq_puts(m, "Multiple errors observed since last check.\n"); + if (stats->status_printed) { + seq_puts(m, "(no change since last printing)\n"); + } else { + stats->status_printed = 1; + } + + return 0; +} + +static void create_proc_decoder(struct bw_stats_struct *stats) +{ + struct proc_dir_entry *ent; + + ent = proc_create_single_data("bus_watcher", S_IWUSR | S_IRUGO, NULL, + bw_proc_show, stats); + if (!ent) { + printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n"); + return; + } +} + +#endif /* CONFIG_PROC_FS */ + +/* + * sibyte_bw_int - handle bus watcher interrupts and accumulate counts + * + * notes: possible re-entry due to multiple sources + * should check/indicate saturation + */ +static irqreturn_t sibyte_bw_int(int irq, void *data) +{ + struct bw_stats_struct *stats = data; + unsigned long cntr; +#ifdef CONFIG_SIBYTE_BW_TRACE + int i; +#endif + +#ifdef CONFIG_SIBYTE_BW_TRACE + csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG)); + + for (i=0; i<256*6; i++) + printk("%016llx\n", + (long long)__raw_readq(IOADDR(A_SCD_TRACE_READ))); + + csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); +#endif + + /* Destructive read, clears register and interrupt */ + stats->status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); + stats->status_printed = 0; + + stats->l2_err = cntr = csr_in32(IOADDR(A_BUS_L2_ERRORS)); + stats->l2_cor_d += G_SCD_L2ECC_CORR_D(cntr); + stats->l2_bad_d += G_SCD_L2ECC_BAD_D(cntr); + stats->l2_cor_t += G_SCD_L2ECC_CORR_T(cntr); + stats->l2_bad_t += G_SCD_L2ECC_BAD_T(cntr); + csr_out32(0, IOADDR(A_BUS_L2_ERRORS)); + + stats->memio_err = cntr = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); + stats->mem_cor_d += G_SCD_MEM_ECC_CORR(cntr); + stats->mem_bad_d += G_SCD_MEM_ECC_BAD(cntr); + stats->bus_error += G_SCD_MEM_BUSERR(cntr); + csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS)); + + return IRQ_HANDLED; +} + +int __init sibyte_bus_watcher(void) +{ + memset(&bw_stats, 0, sizeof(struct bw_stats_struct)); + bw_stats.status_printed = 1; + + if (request_irq(K_INT_BAD_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + printk("Failed to register bus watcher BAD_ECC irq\n"); + return -1; + } + if (request_irq(K_INT_COR_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + free_irq(K_INT_BAD_ECC, &bw_stats); + printk("Failed to register bus watcher COR_ECC irq\n"); + return -1; + } + if (request_irq(K_INT_IO_BUS, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + free_irq(K_INT_BAD_ECC, &bw_stats); + free_irq(K_INT_COR_ECC, &bw_stats); + printk("Failed to register bus watcher IO_BUS irq\n"); + return -1; + } + +#ifdef CONFIG_PROC_FS + create_proc_decoder(&bw_stats); +#endif + +#ifdef CONFIG_SIBYTE_BW_TRACE + csr_out32((M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | + K_SCD_TRSEQ_TRIGGER_ALL), + IOADDR(A_SCD_TRACE_SEQUENCE_0)); + csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); +#endif + + return 0; +} + +device_initcall(sibyte_bus_watcher); diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c new file mode 100644 index 000000000..89f7fca45 --- /dev/null +++ b/arch/mips/sibyte/common/cfe.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +/* Max ram addressable in 32-bit segments */ +#ifdef CONFIG_64BIT +#define MAX_RAM_SIZE (~0ULL) +#else +#ifdef CONFIG_HIGHMEM +#ifdef CONFIG_PHYS_ADDR_T_64BIT +#define MAX_RAM_SIZE (~0ULL) +#else +#define MAX_RAM_SIZE (0xffffffffULL) +#endif +#else +#define MAX_RAM_SIZE (0x1fffffffULL) +#endif +#endif + +#define SIBYTE_MAX_MEM_REGIONS 8 +phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS]; +phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS]; +unsigned int board_mem_region_count; + +int cfe_cons_handle; + +#ifdef CONFIG_BLK_DEV_INITRD +extern unsigned long initrd_start, initrd_end; +#endif + +static void __noreturn cfe_linux_exit(void *arg) +{ + int warm = *(int *)arg; + + if (smp_processor_id()) { + static int reboot_smp; + + /* Don't repeat the process from another CPU */ + if (!reboot_smp) { + /* Get CPU 0 to do the cfe_exit */ + reboot_smp = 1; + smp_call_function(cfe_linux_exit, arg, 0); + } + } else { + printk("Passing control back to CFE...\n"); + cfe_exit(warm, 0); + printk("cfe_exit returned??\n"); + } + while (1); +} + +static void __noreturn cfe_linux_restart(char *command) +{ + static const int zero; + + cfe_linux_exit((void *)&zero); +} + +static void __noreturn cfe_linux_halt(void) +{ + static const int one = 1; + + cfe_linux_exit((void *)&one); +} + +static __init void prom_meminit(void) +{ + u64 addr, size, type; /* regardless of PHYS_ADDR_T_64BIT */ + int mem_flags = 0; + unsigned int idx; + int rd_flag; +#ifdef CONFIG_BLK_DEV_INITRD + unsigned long initrd_pstart; + unsigned long initrd_pend; + + initrd_pstart = CPHYSADDR(initrd_start); + initrd_pend = CPHYSADDR(initrd_end); + if (initrd_start && + ((initrd_pstart > MAX_RAM_SIZE) + || (initrd_pend > MAX_RAM_SIZE))) { + panic("initrd out of addressable memory"); + } + +#endif /* INITRD */ + + for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE; + idx++) { + rd_flag = 0; + if (type == CFE_MI_AVAILABLE) { + /* + * See if this block contains (any portion of) the + * ramdisk + */ +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + if ((initrd_pstart > addr) && + (initrd_pstart < (addr + size))) { + memblock_add(addr, + initrd_pstart - addr); + rd_flag = 1; + } + if ((initrd_pend > addr) && + (initrd_pend < (addr + size))) { + memblock_add(initrd_pend, + (addr + size) - initrd_pend); + rd_flag = 1; + } + } +#endif + if (!rd_flag) { + if (addr > MAX_RAM_SIZE) + continue; + if (addr+size > MAX_RAM_SIZE) + size = MAX_RAM_SIZE - (addr+size) + 1; + /* + * memcpy/__copy_user prefetch, which + * will cause a bus error for + * KSEG/KUSEG addrs not backed by RAM. + * Hence, reserve some padding for the + * prefetch distance. + */ + if (size > 512) + size -= 512; + memblock_add(addr, size); + } + board_mem_region_addrs[board_mem_region_count] = addr; + board_mem_region_sizes[board_mem_region_count] = size; + board_mem_region_count++; + if (board_mem_region_count == + SIBYTE_MAX_MEM_REGIONS) { + /* + * Too many regions. Need to configure more + */ + while(1); + } + } + } +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) { + memblock_add(initrd_pstart, initrd_pend - initrd_pstart); + memblock_reserve(initrd_pstart, initrd_pend - initrd_pstart); + } +#endif +} + +#ifdef CONFIG_BLK_DEV_INITRD +static int __init initrd_setup(char *str) +{ + char rdarg[64]; + int idx; + char *tmp, *endptr; + unsigned long initrd_size; + + /* Make a copy of the initrd argument so we can smash it up here */ + for (idx = 0; idx < sizeof(rdarg)-1; idx++) { + if (!str[idx] || (str[idx] == ' ')) break; + rdarg[idx] = str[idx]; + } + + rdarg[idx] = 0; + str = rdarg; + + /* + *Initrd location comes in the form "@" + * e.g. initrd=3abfd@80010000. This is set up by the loader. + */ + for (tmp = str; *tmp != '@'; tmp++) { + if (!*tmp) { + goto fail; + } + } + *tmp = 0; + tmp++; + if (!*tmp) { + goto fail; + } + initrd_size = simple_strtoul(str, &endptr, 16); + if (*endptr) { + *(tmp-1) = '@'; + goto fail; + } + *(tmp-1) = '@'; + initrd_start = simple_strtoul(tmp, &endptr, 16); + if (*endptr) { + goto fail; + } + initrd_end = initrd_start + initrd_size; + printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start); + return 1; + fail: + printk("Bad initrd argument. Disabling initrd\n"); + initrd_start = 0; + initrd_end = 0; + return 1; +} + +#endif + +extern const struct plat_smp_ops sb_smp_ops; +extern const struct plat_smp_ops bcm1480_smp_ops; + +/* + * prom_init is called just after the cpu type is determined, from setup_arch() + */ +void __init prom_init(void) +{ + uint64_t cfe_ept, cfe_handle; + unsigned int cfe_eptseal; + int argc = fw_arg0; + char **envp = (char **) fw_arg2; + int *prom_vec = (int *) fw_arg3; + + _machine_restart = cfe_linux_restart; + _machine_halt = cfe_linux_halt; + pm_power_off = cfe_linux_halt; + + /* + * Check if a loader was used; if NOT, the 4 arguments are + * what CFE gives us (handle, 0, EPT and EPTSEAL) + */ + if (argc < 0) { + cfe_handle = (uint64_t)(long)argc; + cfe_ept = (long)envp; + cfe_eptseal = (uint32_t)(unsigned long)prom_vec; + } else { + if ((int32_t)(long)prom_vec < 0) { + /* + * Old loader; all it gives us is the handle, + * so use the "known" entrypoint and assume + * the seal. + */ + cfe_handle = (uint64_t)(long)prom_vec; + cfe_ept = (uint64_t)((int32_t)0x9fc00500); + cfe_eptseal = CFE_EPTSEAL; + } else { + /* + * Newer loaders bundle the handle/ept/eptseal + * Note: prom_vec is in the loader's useg + * which is still alive in the TLB. + */ + cfe_handle = (uint64_t)((int32_t *)prom_vec)[0]; + cfe_ept = (uint64_t)((int32_t *)prom_vec)[2]; + cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3]; + } + } + if (cfe_eptseal != CFE_EPTSEAL) { + /* too early for panic to do any good */ + printk("CFE's entrypoint seal doesn't match. Spinning."); + while (1) ; + } + cfe_init(cfe_handle, cfe_ept); + /* + * Get the handle for (at least) prom_putchar, possibly for + * boot console + */ + cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); + if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) { + if (argc >= 0) { + /* The loader should have set the command line */ + /* too early for panic to do any good */ + printk("LINUX_CMDLINE not defined in cfe."); + while (1) ; + } + } + +#ifdef CONFIG_BLK_DEV_INITRD + { + char *ptr; + /* Need to find out early whether we've got an initrd. So scan + the list looking now */ + for (ptr = arcs_cmdline; *ptr; ptr++) { + while (*ptr == ' ') { + ptr++; + } + if (!strncmp(ptr, "initrd=", 7)) { + initrd_setup(ptr+7); + break; + } else { + while (*ptr && (*ptr != ' ')) { + ptr++; + } + } + } + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Not sure this is needed, but it's the safe way. */ + arcs_cmdline[COMMAND_LINE_SIZE-1] = 0; + + prom_meminit(); + +#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) + register_smp_ops(&sb_smp_ops); +#endif +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + register_smp_ops(&bcm1480_smp_ops); +#endif +} + +void __init prom_free_prom_memory(void) +{ + /* Not sure what I'm supposed to do here. Nothing, I think */ +} + +void prom_putchar(char c) +{ + int ret; + + while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0) + ; +} diff --git a/arch/mips/sibyte/common/cfe_console.c b/arch/mips/sibyte/common/cfe_console.c new file mode 100644 index 000000000..8af7b41f7 --- /dev/null +++ b/arch/mips/sibyte/common/cfe_console.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +#include + +#include +#include + +extern int cfe_cons_handle; + +static void cfe_console_write(struct console *cons, const char *str, + unsigned int count) +{ + int i, last, written; + + for (i=0, last=0; i 0; i -= 6) { + /* Subscripts decrease to put bundle in the order */ + /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */ + p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t2 hi */ + p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t2 lo */ + p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t1 hi */ + p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t1 lo */ + p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t0 hi */ + p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); + /* read t0 lo */ + } + if (!sbp.tb_enable) { + pr_debug(DEVNAME ": tb_intr shutdown\n"); + __raw_writeq(M_SCD_TRACE_CFG_RESET, + IOADDR(A_SCD_TRACE_CFG)); + sbp.tb_armed = 0; + wake_up_interruptible(&sbp.tb_sync); + } else { + /* knock down current interrupt and get another one later */ + arm_tb(); + } + } else { + /* No more trace buffer samples */ + pr_debug(DEVNAME ": tb_intr full\n"); + __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + sbp.tb_armed = 0; + if (!sbp.tb_enable) + wake_up_interruptible(&sbp.tb_sync); + wake_up_interruptible(&sbp.tb_read); + } + return IRQ_HANDLED; +} + +static irqreturn_t sbprof_pc_intr(int irq, void *dev_id) +{ + printk(DEVNAME ": unexpected pc_intr"); + return IRQ_NONE; +} + +/* + * Requires: Already called zclk_timer_init with a value that won't + * saturate 40 bits. No subsequent use of SCD performance counters + * or trace buffer. + */ + +static int sbprof_zbprof_start(struct file *filp) +{ + u64 scdperfcnt; + int err; + + if (xchg(&sbp.tb_enable, 1)) + return -EBUSY; + + pr_debug(DEVNAME ": starting\n"); + + sbp.next_tb_sample = 0; + filp->f_pos = 0; + + err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, + DEVNAME " trace freeze", &sbp); + if (err) + return -EBUSY; + + /* Make sure there isn't a perf-cnt interrupt waiting */ + scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); + /* Disable and clear counters, override SRC_1 */ + __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | + M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), + IOADDR(A_SCD_PERF_CNT_CFG)); + + /* + * We grab this interrupt to prevent others from trying to use + * it, even though we don't want to service the interrupts + * (they only feed into the trace-on-interrupt mechanism) + */ + if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { + free_irq(K_INT_TRACE_FREEZE, &sbp); + return -EBUSY; + } + + /* + * I need the core to mask these, but the interrupt mapper to + * pass them through. I am exploiting my knowledge that + * cp0_status masks out IP[5]. krw + */ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq(K_BCM1480_INT_MAP_I3, + IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + + ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3))); +#else + __raw_writeq(K_INT_MAP_I3, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + + (K_INT_PERF_CNT << 3))); +#endif + + /* Initialize address traps */ + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); + + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); + + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); + __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); + + /* Initialize Trace Event 0-7 */ + /* when interrupt */ + __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); + + /* Initialize Trace Sequence 0-7 */ + /* Start on event 0 (interrupt) */ + __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, + IOADDR(A_SCD_TRACE_SEQUENCE_0)); + /* dsamp when d used | asamp when a used */ + __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | + K_SCD_TRSEQ_TRIGGER_ALL, + IOADDR(A_SCD_TRACE_SEQUENCE_1)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); + __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); + + /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f), + IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L))); +#else + __raw_writeq(1ULL << K_INT_PERF_CNT, + IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); +#endif + arm_tb(); + + pr_debug(DEVNAME ": done starting\n"); + + return 0; +} + +static int sbprof_zbprof_stop(void) +{ + int err = 0; + + pr_debug(DEVNAME ": stopping\n"); + + if (sbp.tb_enable) { + /* + * XXXKW there is a window here where the intr handler may run, + * see the disable, and do the wake_up before this sleep + * happens. + */ + pr_debug(DEVNAME ": wait for disarm\n"); + err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed); + pr_debug(DEVNAME ": disarm complete, stat %d\n", err); + + if (err) + return err; + + sbp.tb_enable = 0; + free_irq(K_INT_TRACE_FREEZE, &sbp); + free_irq(K_INT_PERF_CNT, &sbp); + } + + pr_debug(DEVNAME ": done stopping\n"); + + return err; +} + +static int sbprof_tb_open(struct inode *inode, struct file *filp) +{ + int minor; + + minor = iminor(inode); + if (minor != 0) + return -ENODEV; + + if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) + return -EBUSY; + + memset(&sbp, 0, sizeof(struct sbprof_tb)); + sbp.sbprof_tbbuf = vzalloc(MAX_TBSAMPLE_BYTES); + if (!sbp.sbprof_tbbuf) { + sbp.open = SB_CLOSED; + wmb(); + return -ENOMEM; + } + + init_waitqueue_head(&sbp.tb_sync); + init_waitqueue_head(&sbp.tb_read); + mutex_init(&sbp.lock); + + sbp.open = SB_OPEN; + wmb(); + + return 0; +} + +static int sbprof_tb_release(struct inode *inode, struct file *filp) +{ + int minor; + + minor = iminor(inode); + if (minor != 0 || sbp.open != SB_CLOSED) + return -ENODEV; + + mutex_lock(&sbp.lock); + + if (sbp.tb_armed || sbp.tb_enable) + sbprof_zbprof_stop(); + + vfree(sbp.sbprof_tbbuf); + sbp.open = SB_CLOSED; + wmb(); + + mutex_unlock(&sbp.lock); + + return 0; +} + +static ssize_t sbprof_tb_read(struct file *filp, char *buf, + size_t size, loff_t *offp) +{ + int cur_sample, sample_off, cur_count, sample_left; + char *src; + int count = 0; + char *dest = buf; + long cur_off = *offp; + + if (!access_ok(buf, size)) + return -EFAULT; + + mutex_lock(&sbp.lock); + + count = 0; + cur_sample = cur_off / TB_SAMPLE_SIZE; + sample_off = cur_off % TB_SAMPLE_SIZE; + sample_left = TB_SAMPLE_SIZE - sample_off; + + while (size && (cur_sample < sbp.next_tb_sample)) { + int err; + + cur_count = size < sample_left ? size : sample_left; + src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off); + err = __copy_to_user(dest, src, cur_count); + if (err) { + *offp = cur_off + cur_count - err; + mutex_unlock(&sbp.lock); + return err; + } + pr_debug(DEVNAME ": read from sample %d, %d bytes\n", + cur_sample, cur_count); + size -= cur_count; + sample_left -= cur_count; + if (!sample_left) { + cur_sample++; + sample_off = 0; + sample_left = TB_SAMPLE_SIZE; + } else { + sample_off += cur_count; + } + cur_off += cur_count; + dest += cur_count; + count += cur_count; + } + *offp = cur_off; + mutex_unlock(&sbp.lock); + + return count; +} + +static long sbprof_tb_ioctl(struct file *filp, + unsigned int command, + unsigned long arg) +{ + int err = 0; + + switch (command) { + case SBPROF_ZBSTART: + mutex_lock(&sbp.lock); + err = sbprof_zbprof_start(filp); + mutex_unlock(&sbp.lock); + break; + + case SBPROF_ZBSTOP: + mutex_lock(&sbp.lock); + err = sbprof_zbprof_stop(); + mutex_unlock(&sbp.lock); + break; + + case SBPROF_ZBWAITFULL: { + err = wait_event_interruptible(sbp.tb_read, TB_FULL); + if (err) + break; + + err = put_user(TB_FULL, (int *) arg); + break; + } + + default: + err = -EINVAL; + break; + } + + return err; +} + +static const struct file_operations sbprof_tb_fops = { + .owner = THIS_MODULE, + .open = sbprof_tb_open, + .release = sbprof_tb_release, + .read = sbprof_tb_read, + .unlocked_ioctl = sbprof_tb_ioctl, + .compat_ioctl = sbprof_tb_ioctl, + .mmap = NULL, + .llseek = default_llseek, +}; + +static struct class *tb_class; +static struct device *tb_dev; + +static int __init sbprof_tb_init(void) +{ + struct device *dev; + struct class *tbc; + int err; + + if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) { + printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n", + SBPROF_TB_MAJOR); + return -EIO; + } + + tbc = class_create(THIS_MODULE, "sb_tracebuffer"); + if (IS_ERR(tbc)) { + err = PTR_ERR(tbc); + goto out_chrdev; + } + + tb_class = tbc; + + dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb"); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_class; + } + tb_dev = dev; + + sbp.open = SB_CLOSED; + wmb(); + tb_period = zbbus_mhz * 10000LL; + pr_info(DEVNAME ": initialized - tb_period = %lld\n", + (long long) tb_period); + return 0; + +out_class: + class_destroy(tb_class); +out_chrdev: + unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); + + return err; +} + +static void __exit sbprof_tb_cleanup(void) +{ + device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0)); + unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); + class_destroy(tb_class); +} + +module_init(sbprof_tb_init); +module_exit(sbprof_tb_cleanup); + +MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR); +MODULE_AUTHOR("Ralf Baechle "); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile new file mode 100644 index 000000000..cf1327d3f --- /dev/null +++ b/arch/mips/sibyte/sb1250/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y := setup.o irq.o time.o + +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c new file mode 100644 index 000000000..86f49c48f --- /dev/null +++ b/arch/mips/sibyte/sb1250/irq.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * These are the routines that handle all the low level interrupt stuff. + * Actions handled here are: initialization of the interrupt map, requesting of + * interrupt lines by handlers, dispatching if interrupts to handlers, probing + * for interrupt lines + */ + +#ifdef CONFIG_SIBYTE_HAS_LDT +extern unsigned long ldt_eoi_space; +#endif + +/* Store the CPU id (not the logical number) */ +int sb1250_irq_owner[SB1250_NR_IRQS]; + +static DEFINE_RAW_SPINLOCK(sb1250_imr_lock); + +void sb1250_mask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints |= (((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +void sb1250_unmask_irq(int cpu, int irq) +{ + unsigned long flags; + u64 cur_ints; + + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); +} + +#ifdef CONFIG_SMP +static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask, + bool force) +{ + int i = 0, old_cpu, cpu, int_on; + unsigned int irq = d->irq; + u64 cur_ints; + unsigned long flags; + + i = cpumask_first_and(mask, cpu_online_mask); + + /* Convert logical CPU to physical CPU */ + cpu = cpu_logical_map(i); + + /* Protect against other affinity changers and IMR manipulation */ + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); + + /* Swizzle each CPU's IMR (but leave the IP selection alone) */ + old_cpu = sb1250_irq_owner[irq]; + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + int_on = !(cur_ints & (((u64) 1) << irq)); + if (int_on) { + /* If it was on, mask it */ + cur_ints |= (((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + + R_IMR_INTERRUPT_MASK)); + } + sb1250_irq_owner[irq] = cpu; + if (int_on) { + /* unmask for the new CPU */ + cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + cur_ints &= ~(((u64) 1) << irq); + ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + + R_IMR_INTERRUPT_MASK)); + } + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); + + return 0; +} +#endif + +static void disable_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + sb1250_mask_irq(sb1250_irq_owner[irq], irq); +} + +static void enable_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + sb1250_unmask_irq(sb1250_irq_owner[irq], irq); +} + + +static void ack_sb1250_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; +#ifdef CONFIG_SIBYTE_HAS_LDT + u64 pending; + + /* + * If the interrupt was an HT interrupt, now is the time to + * clear it. NOTE: we assume the HT bridge was set up to + * deliver the interrupts to all CPUs (which makes affinity + * changing easier for us) + */ + pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], + R_IMR_LDT_INTERRUPT))); + pending &= ((u64)1 << (irq)); + if (pending) { + int i; + for (i=0; i +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +unsigned int sb1_pass; +unsigned int soc_pass; +unsigned int soc_type; +EXPORT_SYMBOL(soc_type); +unsigned int periph_rev; +EXPORT_SYMBOL_GPL(periph_rev); +unsigned int zbbus_mhz; +EXPORT_SYMBOL(zbbus_mhz); + +static char *soc_str; +static char *pass_str; +static unsigned int war_pass; /* XXXKW don't overload PASS defines? */ + +static int __init setup_bcm1250(void) +{ + int ret = 0; + + switch (soc_pass) { + case K_SYS_REVISION_BCM1250_PASS1: + periph_rev = 1; + pass_str = "Pass 1"; + break; + case K_SYS_REVISION_BCM1250_A10: + periph_rev = 2; + pass_str = "A8/A10"; + /* XXXKW different war_pass? */ + war_pass = K_SYS_REVISION_BCM1250_PASS2; + break; + case K_SYS_REVISION_BCM1250_PASS2_2: + periph_rev = 2; + pass_str = "B1"; + break; + case K_SYS_REVISION_BCM1250_B2: + periph_rev = 2; + pass_str = "B2"; + war_pass = K_SYS_REVISION_BCM1250_PASS2_2; + break; + case K_SYS_REVISION_BCM1250_PASS3: + periph_rev = 3; + pass_str = "C0"; + break; + case K_SYS_REVISION_BCM1250_C1: + periph_rev = 3; + pass_str = "C1"; + break; + default: + if (soc_pass < K_SYS_REVISION_BCM1250_PASS2_2) { + periph_rev = 2; + pass_str = "A0-A6"; + war_pass = K_SYS_REVISION_BCM1250_PASS2; + } else { + printk("Unknown BCM1250 rev %x\n", soc_pass); + ret = 1; + } + break; + } + + return ret; +} + +int sb1250_m3_workaround_needed(void) +{ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + case K_SYS_SOC_TYPE_BCM1125: + case K_SYS_SOC_TYPE_BCM1125H: + return soc_pass < K_SYS_REVISION_BCM1250_C0; + + default: + return 0; + } +} + +static int __init setup_bcm112x(void) +{ + int ret = 0; + + switch (soc_pass) { + case 0: + /* Early build didn't have revid set */ + periph_rev = 3; + pass_str = "A1"; + war_pass = K_SYS_REVISION_BCM112x_A1; + break; + case K_SYS_REVISION_BCM112x_A1: + periph_rev = 3; + pass_str = "A1"; + break; + case K_SYS_REVISION_BCM112x_A2: + periph_rev = 3; + pass_str = "A2"; + break; + case K_SYS_REVISION_BCM112x_A3: + periph_rev = 3; + pass_str = "A3"; + break; + case K_SYS_REVISION_BCM112x_A4: + periph_rev = 3; + pass_str = "A4"; + break; + case K_SYS_REVISION_BCM112x_B0: + periph_rev = 3; + pass_str = "B0"; + break; + default: + printk("Unknown %s rev %x\n", soc_str, soc_pass); + ret = 1; + } + + return ret; +} + +/* Setup code likely to be common to all SiByte platforms */ + +static int __init sys_rev_decode(void) +{ + int ret = 0; + + war_pass = soc_pass; + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + case K_SYS_SOC_TYPE_BCM1250_ALT2: + soc_str = "BCM1250"; + ret = setup_bcm1250(); + break; + case K_SYS_SOC_TYPE_BCM1120: + soc_str = "BCM1120"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125: + soc_str = "BCM1125"; + ret = setup_bcm112x(); + break; + case K_SYS_SOC_TYPE_BCM1125H: + soc_str = "BCM1125H"; + ret = setup_bcm112x(); + break; + default: + printk("Unknown SOC type %x\n", soc_type); + ret = 1; + break; + } + + return ret; +} + +void __init sb1250_setup(void) +{ + uint64_t sys_rev; + int plldiv; + int bad_config = 0; + + sb1_pass = read_c0_prid() & PRID_REV_MASK; + sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); + soc_type = SYS_SOC_TYPE(sys_rev); + soc_pass = G_SYS_REVISION(sys_rev); + + if (sys_rev_decode()) { + printk("Restart after failure to identify SiByte chip\n"); + machine_restart(NULL); + } + + plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25); + + printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n", + soc_str, pass_str, zbbus_mhz * 2, sb1_pass); + printk("Board type: %s\n", get_system_type()); + + switch (war_pass) { + case K_SYS_REVISION_BCM1250_PASS1: + printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, " + "and the kernel doesn't have the proper " + "workarounds compiled in. @@@@\n"); + bad_config = 1; + break; + case K_SYS_REVISION_BCM1250_PASS2: + /* Pass 2 - easiest as default for now - so many numbers */ +#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \ + !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) + printk("@@@@ This is a BCM1250 A3-A10 board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#ifdef CONFIG_CPU_HAS_PREFETCH + printk("@@@@ Prefetches may be enabled in this kernel, " + "but are buggy on this board. @@@@\n"); + bad_config = 1; +#endif + break; + case K_SYS_REVISION_BCM1250_PASS2_2: +#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS + printk("@@@@ This is a BCM1250 B1/B2. board, and the " + "kernel doesn't have the proper workarounds " + "compiled in. @@@@\n"); + bad_config = 1; +#endif +#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \ + !defined(CONFIG_CPU_HAS_PREFETCH) + printk("@@@@ This is a BCM1250 B1/B2, but the kernel is " + "conservatively configured for an 'A' stepping. " + "@@@@\n"); +#endif + break; + default: + break; + } + if (bad_config) { + printk("Invalid configuration for this chip.\n"); + machine_restart(NULL); + } +} diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c new file mode 100644 index 000000000..7a794234e --- /dev/null +++ b/arch/mips/sibyte/sb1250/smp.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001, 2002, 2003 Broadcom Corporation + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static void *mailbox_set_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU) +}; + +static void *mailbox_clear_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU) +}; + +static void *mailbox_regs[] = { + IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU), + IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU) +}; + +/* + * SMP init and finish on secondary CPUs + */ +void sb1250_smp_init(void) +{ + unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | + STATUSF_IP1 | STATUSF_IP0; + + /* Set interrupt mask, but don't enable */ + change_c0_status(ST0_IM, imask); +} + +/* + * These are routines for dealing with the sb1250 smp capabilities + * independent of board/firmware + */ + +/* + * Simple enough; everything is set up, so just poke the appropriate mailbox + * register, and we should be set + */ +static void sb1250_send_ipi_single(int cpu, unsigned int action) +{ + __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]); +} + +static inline void sb1250_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + sb1250_send_ipi_single(i, action); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void sb1250_init_secondary(void) +{ + extern void sb1250_smp_init(void); + + sb1250_smp_init(); +} + +/* + * Do any tidying up before marking online and running the idle + * loop + */ +static void sb1250_smp_finish(void) +{ + extern void sb1250_clockevent_init(void); + + sb1250_clockevent_init(); + local_irq_enable(); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + */ +static int sb1250_boot_secondary(int cpu, struct task_struct *idle) +{ + int retval; + + retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap, + __KSTK_TOS(idle), + (unsigned long)task_thread_info(idle), 0); + if (retval != 0) + printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval); + return retval; +} + +/* + * Use CFE to find out how many CPUs are available, setting up + * cpu_possible_mask and the logical/physical mappings. + * XXXKW will the boot CPU ever not be physical 0? + * + * Common setup before any secondaries are started + */ +static void __init sb1250_smp_setup(void) +{ + int i, num; + + init_cpu_possible(cpumask_of(0)); + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + for (i = 1, num = 0; i < NR_CPUS; i++) { + if (cfe_cpu_stop(i) == 0) { + set_cpu_possible(i, true); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + } + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +static void __init sb1250_prepare_cpus(unsigned int max_cpus) +{ +} + +const struct plat_smp_ops sb_smp_ops = { + .send_ipi_single = sb1250_send_ipi_single, + .send_ipi_mask = sb1250_send_ipi_mask, + .init_secondary = sb1250_init_secondary, + .smp_finish = sb1250_smp_finish, + .boot_secondary = sb1250_boot_secondary, + .smp_setup = sb1250_smp_setup, + .prepare_cpus = sb1250_prepare_cpus, +}; + +void sb1250_mailbox_interrupt(void) +{ + int cpu = smp_processor_id(); + int irq = K_INT_MBOX_0; + unsigned int action; + + kstat_incr_irq_this_cpu(irq); + /* Load the mailbox register to figure out what we're supposed to do */ + action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; + + /* Clear the mailbox to clear the interrupt */ + ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + + if (action & SMP_CALL_FUNCTION) { + irq_enter(); + generic_smp_call_function_interrupt(); + irq_exit(); + } +} diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c new file mode 100644 index 000000000..8b63000a4 --- /dev/null +++ b/arch/mips/sibyte/sb1250/time.c @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#include + +extern void sb1250_clocksource_init(void); +extern void sb1250_clockevent_init(void); + +void __init plat_time_init(void) +{ + sb1250_clocksource_init(); + sb1250_clockevent_init(); +} diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile new file mode 100644 index 000000000..96b41a28f --- /dev/null +++ b/arch/mips/sibyte/swarm/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-y := platform.o setup.o rtc_xicor1241.o \ + rtc_m41t81.o + +obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c new file mode 100644 index 000000000..484969db7 --- /dev/null +++ b/arch/mips/sibyte/swarm/platform.c @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) + +#define DRV_NAME "pata-swarm" + +#define SWARM_IDE_SHIFT 5 +#define SWARM_IDE_BASE 0x1f0 +#define SWARM_IDE_CTRL 0x3f6 + +static struct resource swarm_pata_resource[] = { + { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_MEM, + }, { + .name = "Swarm GenBus IDE", + .flags = IORESOURCE_IRQ, + .start = K_INT_GB_IDE, + .end = K_INT_GB_IDE, + }, +}; + +static struct pata_platform_info pata_platform_data = { + .ioport_shift = SWARM_IDE_SHIFT, +}; + +static struct platform_device swarm_pata_device = { + .name = "pata_platform", + .id = -1, + .resource = swarm_pata_resource, + .num_resources = ARRAY_SIZE(swarm_pata_resource), + .dev = { + .platform_data = &pata_platform_data, + .coherent_dma_mask = ~0, /* grumble */ + }, +}; + +static int __init swarm_pata_init(void) +{ + u8 __iomem *base; + phys_addr_t offset, size; + struct resource *r; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + pr_info(DRV_NAME ": PATA interface at GenBus disabled\n"); + + return -EBUSY; + } + + pr_info(DRV_NAME ": PATA interface at GenBus slot %i\n", IDE_CS); + + r = swarm_pata_resource; + r[0].start = offset + (SWARM_IDE_BASE << SWARM_IDE_SHIFT); + r[0].end = offset + ((SWARM_IDE_BASE + 8) << SWARM_IDE_SHIFT) - 1; + r[1].start = offset + (SWARM_IDE_CTRL << SWARM_IDE_SHIFT); + r[1].end = offset + ((SWARM_IDE_CTRL + 1) << SWARM_IDE_SHIFT) - 1; + + return platform_device_register(&swarm_pata_device); +} + +device_initcall(swarm_pata_init); + +#endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */ + +#define sb1250_dev_struct(num) \ + static struct resource sb1250_res##num = { \ + .name = "SB1250 MAC " __stringify(num), \ + .flags = IORESOURCE_MEM, \ + .start = A_MAC_CHANNEL_BASE(num), \ + .end = A_MAC_CHANNEL_BASE(num + 1) -1, \ + };\ + static struct platform_device sb1250_dev##num = { \ + .name = "sb1250-mac", \ + .id = num, \ + .resource = &sb1250_res##num, \ + .num_resources = 1, \ + } + +sb1250_dev_struct(0); +sb1250_dev_struct(1); +sb1250_dev_struct(2); +sb1250_dev_struct(3); + +static struct platform_device *sb1250_devs[] __initdata = { + &sb1250_dev0, + &sb1250_dev1, + &sb1250_dev2, + &sb1250_dev3, +}; + +static int __init sb1250_device_init(void) +{ + int ret; + + /* Set the number of available units based on the SOC type. */ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1250: + case K_SYS_SOC_TYPE_BCM1250_ALT: + ret = platform_add_devices(sb1250_devs, 3); + break; + case K_SYS_SOC_TYPE_BCM1120: + case K_SYS_SOC_TYPE_BCM1125: + case K_SYS_SOC_TYPE_BCM1125H: + case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */ + ret = platform_add_devices(sb1250_devs, 2); + break; + case K_SYS_SOC_TYPE_BCM1x55: + case K_SYS_SOC_TYPE_BCM1x80: + ret = platform_add_devices(sb1250_devs, 4); + break; + default: + ret = -ENODEV; + break; + } + return ret; +} +device_initcall(sb1250_device_init); diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c new file mode 100644 index 000000000..afe1e3460 --- /dev/null +++ b/arch/mips/sibyte/swarm/rtc_m41t81.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * Copyright (C) 2002 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + */ +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + + +/* M41T81 definitions */ + +/* + * Register bits + */ + +#define M41T81REG_SC_ST 0x80 /* stop bit */ +#define M41T81REG_HR_CB 0x40 /* century bit */ +#define M41T81REG_HR_CEB 0x80 /* century enable bit */ +#define M41T81REG_CTL_S 0x20 /* sign bit */ +#define M41T81REG_CTL_FT 0x40 /* frequency test bit */ +#define M41T81REG_CTL_OUT 0x80 /* output level */ +#define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */ +#define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */ +#define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */ +#define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */ +#define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */ +#define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */ +#define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */ +#define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */ +#define M41T81REG_AMO_SQWE 0x40 /* square wave enable */ +#define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */ +#define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */ +#define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */ +#define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */ +#define M41T81REG_AHR_HT 0x40 /* halt update bit */ +#define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */ +#define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */ +#define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */ +#define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */ +#define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */ +#define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */ +#define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */ +#define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */ + + +/* + * Register numbers + */ + +#define M41T81REG_TSC 0x00 /* tenths/hundredths of second */ +#define M41T81REG_SC 0x01 /* seconds */ +#define M41T81REG_MN 0x02 /* minute */ +#define M41T81REG_HR 0x03 /* hour/century */ +#define M41T81REG_DY 0x04 /* day of week */ +#define M41T81REG_DT 0x05 /* date of month */ +#define M41T81REG_MO 0x06 /* month */ +#define M41T81REG_YR 0x07 /* year */ +#define M41T81REG_CTL 0x08 /* control */ +#define M41T81REG_WD 0x09 /* watchdog */ +#define M41T81REG_AMO 0x0A /* alarm: month */ +#define M41T81REG_ADT 0x0B /* alarm: date */ +#define M41T81REG_AHR 0x0C /* alarm: hour */ +#define M41T81REG_AMN 0x0D /* alarm: minute */ +#define M41T81REG_ASC 0x0E /* alarm: second */ +#define M41T81REG_FLG 0x0F /* flags */ +#define M41T81REG_SQW 0x13 /* square wave register */ + +#define M41T81_CCR_ADDRESS 0x68 + +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) + +static int m41t81_read(uint8_t addr) +{ + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } + + return __raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff; +} + +static int m41t81_write(uint8_t addr, int b) +{ + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); + __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } + + /* read the same byte again to make sure it is written */ + __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + return 0; +} + +int m41t81_set_time(time64_t t) +{ + struct rtc_time tm; + unsigned long flags; + + /* Note we don't care about the century */ + rtc_time64_to_tm(t, &tm); + + /* + * Note the write order matters as it ensures the correctness. + * When we write sec, 10th sec is clear. It is reasonable to + * believe we should finish writing min within a second. + */ + + spin_lock_irqsave(&rtc_lock, flags); + tm.tm_sec = bin2bcd(tm.tm_sec); + m41t81_write(M41T81REG_SC, tm.tm_sec); + + tm.tm_min = bin2bcd(tm.tm_min); + m41t81_write(M41T81REG_MN, tm.tm_min); + + tm.tm_hour = bin2bcd(tm.tm_hour); + tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0); + m41t81_write(M41T81REG_HR, tm.tm_hour); + + /* tm_wday starts from 0 to 6 */ + if (tm.tm_wday == 0) tm.tm_wday = 7; + tm.tm_wday = bin2bcd(tm.tm_wday); + m41t81_write(M41T81REG_DY, tm.tm_wday); + + tm.tm_mday = bin2bcd(tm.tm_mday); + m41t81_write(M41T81REG_DT, tm.tm_mday); + + /* tm_mon starts from 0, *ick* */ + tm.tm_mon ++; + tm.tm_mon = bin2bcd(tm.tm_mon); + m41t81_write(M41T81REG_MO, tm.tm_mon); + + /* we don't do century, everything is beyond 2000 */ + tm.tm_year %= 100; + tm.tm_year = bin2bcd(tm.tm_year); + m41t81_write(M41T81REG_YR, tm.tm_year); + spin_unlock_irqrestore(&rtc_lock, flags); + + return 0; +} + +time64_t m41t81_get_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + unsigned long flags; + + /* + * min is valid if two reads of sec are the same. + */ + for (;;) { + spin_lock_irqsave(&rtc_lock, flags); + sec = m41t81_read(M41T81REG_SC); + min = m41t81_read(M41T81REG_MN); + if (sec == m41t81_read(M41T81REG_SC)) break; + spin_unlock_irqrestore(&rtc_lock, flags); + } + hour = m41t81_read(M41T81REG_HR) & 0x3f; + day = m41t81_read(M41T81REG_DT); + mon = m41t81_read(M41T81REG_MO); + year = m41t81_read(M41T81REG_YR); + spin_unlock_irqrestore(&rtc_lock, flags); + + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); + + year += 2000; + + return mktime64(year, mon, day, hour, min, sec); +} + +int m41t81_probe(void) +{ + unsigned int tmp; + + /* enable chip if it is not enabled yet */ + tmp = m41t81_read(M41T81REG_SC); + m41t81_write(M41T81REG_SC, tmp & 0x7f); + + return m41t81_read(M41T81REG_SC) != -1; +} diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c new file mode 100644 index 000000000..e2164200c --- /dev/null +++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + * + * Copyright (C) 2002 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + */ +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + + +/* Xicor 1241 definitions */ + +/* + * Register bits + */ + +#define X1241REG_SR_BAT 0x80 /* currently on battery power */ +#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */ +#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */ +#define X1241REG_SR_RTCF 0x01 /* clock failed */ +#define X1241REG_BL_BP2 0x80 /* block protect 2 */ +#define X1241REG_BL_BP1 0x40 /* block protect 1 */ +#define X1241REG_BL_BP0 0x20 /* block protect 0 */ +#define X1241REG_BL_WD1 0x10 +#define X1241REG_BL_WD0 0x08 +#define X1241REG_HR_MIL 0x80 /* military time format */ + +/* + * Register numbers + */ + +#define X1241REG_BL 0x10 /* block protect bits */ +#define X1241REG_INT 0x11 /* */ +#define X1241REG_SC 0x30 /* Seconds */ +#define X1241REG_MN 0x31 /* Minutes */ +#define X1241REG_HR 0x32 /* Hours */ +#define X1241REG_DT 0x33 /* Day of month */ +#define X1241REG_MO 0x34 /* Month */ +#define X1241REG_YR 0x35 /* Year */ +#define X1241REG_DW 0x36 /* Day of Week */ +#define X1241REG_Y2K 0x37 /* Year 2K */ +#define X1241REG_SR 0x3F /* Status register */ + +#define X1241_CCR_ADDRESS 0x6F + +#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) + +static int xicor_read(uint8_t addr) +{ + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); + __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } + + return __raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff; +} + +static int xicor_write(uint8_t addr, int b) +{ + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); + __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); + __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, + SMB_CSR(R_SMB_START)); + + while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) + ; + + if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { + /* Clear error bit by writing a 1 */ + __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); + return -1; + } else { + return 0; + } +} + +int xicor_set_time(time64_t t) +{ + struct rtc_time tm; + int tmp; + unsigned long flags; + + rtc_time64_to_tm(t, &tm); + tm.tm_year += 1900; + + spin_lock_irqsave(&rtc_lock, flags); + /* unlock writes to the CCR */ + xicor_write(X1241REG_SR, X1241REG_SR_WEL); + xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); + + /* trivial ones */ + tm.tm_sec = bin2bcd(tm.tm_sec); + xicor_write(X1241REG_SC, tm.tm_sec); + + tm.tm_min = bin2bcd(tm.tm_min); + xicor_write(X1241REG_MN, tm.tm_min); + + tm.tm_mday = bin2bcd(tm.tm_mday); + xicor_write(X1241REG_DT, tm.tm_mday); + + /* tm_mon starts from 0, *ick* */ + tm.tm_mon ++; + tm.tm_mon = bin2bcd(tm.tm_mon); + xicor_write(X1241REG_MO, tm.tm_mon); + + /* year is split */ + tmp = tm.tm_year / 100; + tm.tm_year %= 100; + xicor_write(X1241REG_YR, tm.tm_year); + xicor_write(X1241REG_Y2K, tmp); + + /* hour is the most tricky one */ + tmp = xicor_read(X1241REG_HR); + if (tmp & X1241REG_HR_MIL) { + /* 24 hour format */ + tm.tm_hour = bin2bcd(tm.tm_hour); + tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f); + } else { + /* 12 hour format, with 0x2 for pm */ + tmp = tmp & ~0x3f; + if (tm.tm_hour >= 12) { + tmp |= 0x20; + tm.tm_hour -= 12; + } + tm.tm_hour = bin2bcd(tm.tm_hour); + tmp |= tm.tm_hour; + } + xicor_write(X1241REG_HR, tmp); + + xicor_write(X1241REG_SR, 0); + spin_unlock_irqrestore(&rtc_lock, flags); + + return 0; +} + +time64_t xicor_get_time(void) +{ + unsigned int year, mon, day, hour, min, sec, y2k; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + sec = xicor_read(X1241REG_SC); + min = xicor_read(X1241REG_MN); + hour = xicor_read(X1241REG_HR); + + if (hour & X1241REG_HR_MIL) { + hour &= 0x3f; + } else { + if (hour & 0x20) + hour = (hour & 0xf) + 0x12; + } + + day = xicor_read(X1241REG_DT); + mon = xicor_read(X1241REG_MO); + year = xicor_read(X1241REG_YR); + y2k = xicor_read(X1241REG_Y2K); + spin_unlock_irqrestore(&rtc_lock, flags); + + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); + y2k = bcd2bin(y2k); + + year += (y2k * 100); + + return mktime64(year, mon, day, hour, min, sec); +} + +int xicor_probe(void) +{ + return xicor_read(X1241REG_SC) != -1; +} diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c new file mode 100644 index 000000000..538a2791b --- /dev/null +++ b/arch/mips/sibyte/swarm/setup.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + */ + +/* + * Setup code for the SWARM board + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#include +#else +#error invalid SiByte board configuration +#endif +#include +#include + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +extern void bcm1480_setup(void); +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +extern void sb1250_setup(void); +#else +#error invalid SiByte board configuration +#endif + +extern int xicor_probe(void); +extern int xicor_set_time(time64_t); +extern time64_t xicor_get_time(void); + +extern int m41t81_probe(void); +extern int m41t81_set_time(time64_t); +extern time64_t m41t81_get_time(void); + +const char *get_system_type(void) +{ + return "SiByte " SIBYTE_BOARD_NAME; +} + +int swarm_be_handler(struct pt_regs *regs, int is_fixup) +{ + if (!is_fixup && (regs->cp0_cause & 4)) { + /* Data bus error - print PA */ + printk("DBE physical address: %010Lx\n", + __read_64bit_c0_register($26, 1)); + } + return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; +} + +enum swarm_rtc_type { + RTC_NONE, + RTC_XICOR, + RTC_M41T81, +}; + +enum swarm_rtc_type swarm_rtc_type; + +void read_persistent_clock64(struct timespec64 *ts) +{ + time64_t sec; + + switch (swarm_rtc_type) { + case RTC_XICOR: + sec = xicor_get_time(); + break; + + case RTC_M41T81: + sec = m41t81_get_time(); + break; + + case RTC_NONE: + default: + sec = mktime64(2000, 1, 1, 0, 0, 0); + break; + } + ts->tv_sec = sec; + ts->tv_nsec = 0; +} + +int update_persistent_clock64(struct timespec64 now) +{ + time64_t sec = now.tv_sec; + + switch (swarm_rtc_type) { + case RTC_XICOR: + return xicor_set_time(sec); + + case RTC_M41T81: + return m41t81_set_time(sec); + + case RTC_NONE: + default: + return -1; + } +} + +void __init plat_mem_setup(void) +{ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + bcm1480_setup(); +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) + sb1250_setup(); +#else +#error invalid SiByte board configuration +#endif + + board_be_handler = swarm_be_handler; + + if (xicor_probe()) + swarm_rtc_type = RTC_XICOR; + if (m41t81_probe()) + swarm_rtc_type = RTC_M41T81; + +#ifdef CONFIG_VT + screen_info = (struct screen_info) { + .orig_video_page = 52, + .orig_video_mode = 3, + .orig_video_cols = 80, + .flags = 12, + .orig_video_ega_bx = 3, + .orig_video_lines = 25, + .orig_video_isVGA = 0x22, + .orig_video_points = 16, + }; + /* XXXKW for CFE, get lines/cols from environment */ +#endif +} + +#ifdef LEDS_PHYS + +#ifdef CONFIG_SIBYTE_CARMEL +/* XXXKW need to detect Monterey/LittleSur/etc */ +#undef LEDS_PHYS +#define LEDS_PHYS MLEDS_PHYS +#endif + +void setleds(char *str) +{ + void *reg; + int i; + + for (i = 0; i < 4; i++) { + reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3); + + if (!str[i]) + writeb(' ', reg); + else + writeb(str[i], reg); + } +} + +#endif /* LEDS_PHYS */ diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c new file mode 100644 index 000000000..1ed2dc96d --- /dev/null +++ b/arch/mips/sibyte/swarm/swarm-i2c.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Broadcom BCM91250A (SWARM), etc. I2C platform setup. + * + * Copyright (c) 2008 Maciej W. Rozycki + */ + +#include +#include +#include + + +static struct i2c_board_info swarm_i2c_info1[] __initdata = { + { + I2C_BOARD_INFO("m41t81", 0x68), + }, +}; + +static int __init swarm_i2c_init(void) +{ + int err; + + err = i2c_register_board_info(1, swarm_i2c_info1, + ARRAY_SIZE(swarm_i2c_info1)); + if (err < 0) + printk(KERN_ERR + "swarm-i2c: cannot register board I2C devices\n"); + return err; +} + +arch_initcall(swarm_i2c_init); -- cgit v1.2.3