From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- drivers/gpu/drm/tilcdc/tilcdc_drv.h | 169 ++++++++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_drv.h (limited to 'drivers/gpu/drm/tilcdc/tilcdc_drv.h') diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h new file mode 100644 index 000000000..18815e75c --- /dev/null +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark + */ + +#ifndef __TILCDC_DRV_H__ +#define __TILCDC_DRV_H__ + +#include +#include + +#include + +struct clk; +struct workqueue_struct; + +struct drm_connector; +struct drm_connector_helper_funcs; +struct drm_crtc; +struct drm_device; +struct drm_display_mode; +struct drm_encoder; +struct drm_framebuffer; +struct drm_minor; +struct drm_pending_vblank_event; +struct drm_plane; + +/* Defaulting to pixel clock defined on AM335x */ +#define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000 +/* Defaulting to max width as defined on AM335x */ +#define TILCDC_DEFAULT_MAX_WIDTH 2048 +/* + * This may need some tweaking, but want to allow at least 1280x1024@60 + * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to + * be supportable + */ +#define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60) + + +struct tilcdc_drm_private { + void __iomem *mmio; + + struct clk *clk; /* functional clock */ + int rev; /* IP revision */ + + /* don't attempt resolutions w/ higher W * H * Hz: */ + uint32_t max_bandwidth; + /* + * Pixel Clock will be restricted to some value as + * defined in the device datasheet measured in KHz + */ + uint32_t max_pixelclock; + /* + * Max allowable width is limited on a per device basis + * measured in pixels + */ + uint32_t max_width; + + /* Supported pixel formats */ + const uint32_t *pixelformats; + uint32_t num_pixelformats; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif + + struct workqueue_struct *wq; + + struct drm_crtc *crtc; + + unsigned int num_encoders; + struct drm_encoder *encoders[8]; + + unsigned int num_connectors; + struct drm_connector *connectors[8]; + + struct drm_encoder *external_encoder; + struct drm_connector *external_connector; + + bool is_registered; + bool is_componentized; +}; + +/* Sub-module for display. Since we don't know at compile time what panels + * or display adapter(s) might be present (for ex, off chip dvi/tfp410, + * hdmi encoder, various lcd panels), the connector/encoder(s) are split into + * separate drivers. If they are probed and found to be present, they + * register themselves with tilcdc_register_module(). + */ +struct tilcdc_module; + +struct tilcdc_module_ops { + /* create appropriate encoders/connectors: */ + int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev); +#ifdef CONFIG_DEBUG_FS + /* create debugfs nodes (can be NULL): */ + int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor); +#endif +}; + +struct tilcdc_module { + const char *name; + struct list_head list; + const struct tilcdc_module_ops *funcs; +}; + +void tilcdc_module_init(struct tilcdc_module *mod, const char *name, + const struct tilcdc_module_ops *funcs); +void tilcdc_module_cleanup(struct tilcdc_module *mod); + +/* Panel config that needs to be set in the crtc, but is not coming from + * the mode timings. The display module is expected to call + * tilcdc_crtc_set_panel_info() to set this during modeset. + */ +struct tilcdc_panel_info { + + /* AC Bias Pin Frequency */ + uint32_t ac_bias; + + /* AC Bias Pin Transitions per Interrupt */ + uint32_t ac_bias_intrpt; + + /* DMA burst size */ + uint32_t dma_burst_sz; + + /* Bits per pixel */ + uint32_t bpp; + + /* FIFO DMA Request Delay */ + uint32_t fdd; + + /* TFT Alternative Signal Mapping (Only for active) */ + bool tft_alt_mode; + + /* Invert pixel clock */ + bool invert_pxl_clk; + + /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ + uint32_t sync_edge; + + /* Horizontal and Vertical Sync: Control: 0=ignore */ + uint32_t sync_ctrl; + + /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ + uint32_t raster_order; + + /* DMA FIFO threshold */ + uint32_t fifo_th; +}; + +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) + +int tilcdc_crtc_create(struct drm_device *dev); +irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc); +void tilcdc_crtc_update_clk(struct drm_crtc *crtc); +void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, + const struct tilcdc_panel_info *info); +void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, + bool simulate_vesa_sync); +int tilcdc_crtc_max_width(struct drm_crtc *crtc); +void tilcdc_crtc_shutdown(struct drm_crtc *crtc); +int tilcdc_crtc_update_fb(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event); + +int tilcdc_plane_init(struct drm_device *dev, struct drm_plane *plane); + +#endif /* __TILCDC_DRV_H__ */ -- cgit v1.2.3