From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- include/asm-generic/vmlinux.lds.h | 1168 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1168 insertions(+) create mode 100644 include/asm-generic/vmlinux.lds.h (limited to 'include/asm-generic/vmlinux.lds.h') diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h new file mode 100644 index 000000000..44103f948 --- /dev/null +++ b/include/asm-generic/vmlinux.lds.h @@ -0,0 +1,1168 @@ +/* + * Helper macros to support writing architecture specific + * linker scripts. + * + * A minimal linker scripts has following content: + * [This is a sample, architectures may have special requiriements] + * + * OUTPUT_FORMAT(...) + * OUTPUT_ARCH(...) + * ENTRY(...) + * SECTIONS + * { + * . = START; + * __init_begin = .; + * HEAD_TEXT_SECTION + * INIT_TEXT_SECTION(PAGE_SIZE) + * INIT_DATA_SECTION(...) + * PERCPU_SECTION(CACHELINE_SIZE) + * __init_end = .; + * + * _stext = .; + * TEXT_SECTION = 0 + * _etext = .; + * + * _sdata = .; + * RO_DATA(PAGE_SIZE) + * RW_DATA(...) + * _edata = .; + * + * EXCEPTION_TABLE(...) + * + * BSS_SECTION(0, 0, 0) + * _end = .; + * + * STABS_DEBUG + * DWARF_DEBUG + * ELF_DETAILS + * + * DISCARDS // must be the last + * } + * + * [__init_begin, __init_end] is the init section that may be freed after init + * // __init_begin and __init_end should be page aligned, so that we can + * // free the whole .init memory + * [_stext, _etext] is the text section + * [_sdata, _edata] is the data section + * + * Some of the included output section have their own set of constants. + * Examples are: [__initramfs_start, __initramfs_end] for initramfs and + * [__nosave_begin, __nosave_end] for the nosave data + */ + +#ifndef LOAD_OFFSET +#define LOAD_OFFSET 0 +#endif + +/* + * Only some architectures want to have the .notes segment visible in + * a separate PT_NOTE ELF Program Header. When this happens, it needs + * to be visible in both the kernel text's PT_LOAD and the PT_NOTE + * Program Headers. In this case, though, the PT_LOAD needs to be made + * the default again so that all the following sections don't also end + * up in the PT_NOTE Program Header. + */ +#ifdef EMITS_PT_NOTE +#define NOTES_HEADERS :text :note +#define NOTES_HEADERS_RESTORE __restore_ph : { *(.__restore_ph) } :text +#else +#define NOTES_HEADERS +#define NOTES_HEADERS_RESTORE +#endif + +/* + * Some architectures have non-executable read-only exception tables. + * They can be added to the RO_DATA segment by specifying their desired + * alignment. + */ +#ifdef RO_EXCEPTION_TABLE_ALIGN +#define RO_EXCEPTION_TABLE EXCEPTION_TABLE(RO_EXCEPTION_TABLE_ALIGN) +#else +#define RO_EXCEPTION_TABLE +#endif + +/* Align . to a 8 byte boundary equals to maximum function alignment. */ +#define ALIGN_FUNCTION() . = ALIGN(8) + +/* + * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which + * generates .data.identifier sections, which need to be pulled in with + * .data. We don't want to pull in .data..other sections, which Linux + * has defined. Same for text and bss. + * + * RODATA_MAIN is not used because existing code already defines .rodata.x + * sections to be brought in with rodata. + */ +#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION +#define TEXT_MAIN .text .text.[0-9a-zA-Z_]* +#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX* +#define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]* +#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* +#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* +#define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]* +#else +#define TEXT_MAIN .text +#define DATA_MAIN .data +#define SDATA_MAIN .sdata +#define RODATA_MAIN .rodata +#define BSS_MAIN .bss +#define SBSS_MAIN .sbss +#endif + +/* + * GCC 4.5 and later have a 32 bytes section alignment for structures. + * Except GCC 4.9, that feels the need to align on 64 bytes. + */ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 9 +#define STRUCT_ALIGNMENT 64 +#else +#define STRUCT_ALIGNMENT 32 +#endif +#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT) + +/* + * The order of the sched class addresses are important, as they are + * used to determine the order of the priority of each sched class in + * relation to each other. + */ +#define SCHED_DATA \ + STRUCT_ALIGN(); \ + __begin_sched_classes = .; \ + *(__idle_sched_class) \ + *(__fair_sched_class) \ + *(__rt_sched_class) \ + *(__dl_sched_class) \ + *(__stop_sched_class) \ + __end_sched_classes = .; + +/* The actual configuration determine if the init/exit sections + * are handled as text/data or they can be discarded (which + * often happens at runtime) + */ +#ifdef CONFIG_HOTPLUG_CPU +#define CPU_KEEP(sec) *(.cpu##sec) +#define CPU_DISCARD(sec) +#else +#define CPU_KEEP(sec) +#define CPU_DISCARD(sec) *(.cpu##sec) +#endif + +#if defined(CONFIG_MEMORY_HOTPLUG) +#define MEM_KEEP(sec) *(.mem##sec) +#define MEM_DISCARD(sec) +#else +#define MEM_KEEP(sec) +#define MEM_DISCARD(sec) *(.mem##sec) +#endif + +#ifdef CONFIG_FTRACE_MCOUNT_RECORD +/* + * The ftrace call sites are logged to a section whose name depends on the + * compiler option used. A given kernel image will only use one, AKA + * FTRACE_CALLSITE_SECTION. We capture all of them here to avoid header + * dependencies for FTRACE_CALLSITE_SECTION's definition. + * + * Need to also make ftrace_stub_graph point to ftrace_stub + * so that the same stub location may have different protocols + * and not mess up with C verifiers. + */ +#define MCOUNT_REC() . = ALIGN(8); \ + __start_mcount_loc = .; \ + KEEP(*(__mcount_loc)) \ + KEEP(*(__patchable_function_entries)) \ + __stop_mcount_loc = .; \ + ftrace_stub_graph = ftrace_stub; +#else +# ifdef CONFIG_FUNCTION_TRACER +# define MCOUNT_REC() ftrace_stub_graph = ftrace_stub; +# else +# define MCOUNT_REC() +# endif +#endif + +#ifdef CONFIG_TRACE_BRANCH_PROFILING +#define LIKELY_PROFILE() __start_annotated_branch_profile = .; \ + KEEP(*(_ftrace_annotated_branch)) \ + __stop_annotated_branch_profile = .; +#else +#define LIKELY_PROFILE() +#endif + +#ifdef CONFIG_PROFILE_ALL_BRANCHES +#define BRANCH_PROFILE() __start_branch_profile = .; \ + KEEP(*(_ftrace_branch)) \ + __stop_branch_profile = .; +#else +#define BRANCH_PROFILE() +#endif + +#ifdef CONFIG_KPROBES +#define KPROBE_BLACKLIST() . = ALIGN(8); \ + __start_kprobe_blacklist = .; \ + KEEP(*(_kprobe_blacklist)) \ + __stop_kprobe_blacklist = .; +#else +#define KPROBE_BLACKLIST() +#endif + +#ifdef CONFIG_FUNCTION_ERROR_INJECTION +#define ERROR_INJECT_WHITELIST() STRUCT_ALIGN(); \ + __start_error_injection_whitelist = .; \ + KEEP(*(_error_injection_whitelist)) \ + __stop_error_injection_whitelist = .; +#else +#define ERROR_INJECT_WHITELIST() +#endif + +#ifdef CONFIG_EVENT_TRACING +#define FTRACE_EVENTS() . = ALIGN(8); \ + __start_ftrace_events = .; \ + KEEP(*(_ftrace_events)) \ + __stop_ftrace_events = .; \ + __start_ftrace_eval_maps = .; \ + KEEP(*(_ftrace_eval_map)) \ + __stop_ftrace_eval_maps = .; +#else +#define FTRACE_EVENTS() +#endif + +#ifdef CONFIG_TRACING +#define TRACE_PRINTKS() __start___trace_bprintk_fmt = .; \ + KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \ + __stop___trace_bprintk_fmt = .; +#define TRACEPOINT_STR() __start___tracepoint_str = .; \ + KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \ + __stop___tracepoint_str = .; +#else +#define TRACE_PRINTKS() +#define TRACEPOINT_STR() +#endif + +#ifdef CONFIG_FTRACE_SYSCALLS +#define TRACE_SYSCALLS() . = ALIGN(8); \ + __start_syscalls_metadata = .; \ + KEEP(*(__syscalls_metadata)) \ + __stop_syscalls_metadata = .; +#else +#define TRACE_SYSCALLS() +#endif + +#ifdef CONFIG_BPF_EVENTS +#define BPF_RAW_TP() STRUCT_ALIGN(); \ + __start__bpf_raw_tp = .; \ + KEEP(*(__bpf_raw_tp_map)) \ + __stop__bpf_raw_tp = .; +#else +#define BPF_RAW_TP() +#endif + +#ifdef CONFIG_SERIAL_EARLYCON +#define EARLYCON_TABLE() . = ALIGN(8); \ + __earlycon_table = .; \ + KEEP(*(__earlycon_table)) \ + __earlycon_table_end = .; +#else +#define EARLYCON_TABLE() +#endif + +#ifdef CONFIG_SECURITY +#define LSM_TABLE() . = ALIGN(8); \ + __start_lsm_info = .; \ + KEEP(*(.lsm_info.init)) \ + __end_lsm_info = .; +#define EARLY_LSM_TABLE() . = ALIGN(8); \ + __start_early_lsm_info = .; \ + KEEP(*(.early_lsm_info.init)) \ + __end_early_lsm_info = .; +#else +#define LSM_TABLE() +#define EARLY_LSM_TABLE() +#endif + +#define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name) +#define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name) +#define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name) +#define _OF_TABLE_0(name) +#define _OF_TABLE_1(name) \ + . = ALIGN(8); \ + __##name##_of_table = .; \ + KEEP(*(__##name##_of_table)) \ + KEEP(*(__##name##_of_table_end)) + +#define TIMER_OF_TABLES() OF_TABLE(CONFIG_TIMER_OF, timer) +#define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip) +#define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk) +#define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem) +#define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method) +#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method) + +#ifdef CONFIG_ACPI +#define ACPI_PROBE_TABLE(name) \ + . = ALIGN(8); \ + __##name##_acpi_probe_table = .; \ + KEEP(*(__##name##_acpi_probe_table)) \ + __##name##_acpi_probe_table_end = .; +#else +#define ACPI_PROBE_TABLE(name) +#endif + +#ifdef CONFIG_THERMAL +#define THERMAL_TABLE(name) \ + . = ALIGN(8); \ + __##name##_thermal_table = .; \ + KEEP(*(__##name##_thermal_table)) \ + __##name##_thermal_table_end = .; +#else +#define THERMAL_TABLE(name) +#endif + +#define KERNEL_DTB() \ + STRUCT_ALIGN(); \ + __dtb_start = .; \ + KEEP(*(.dtb.init.rodata)) \ + __dtb_end = .; + +/* + * .data section + */ +#define DATA_DATA \ + *(.xiptext) \ + *(DATA_MAIN) \ + *(.data..decrypted) \ + *(.ref.data) \ + *(.data..shared_aligned) /* percpu related */ \ + MEM_KEEP(init.data*) \ + MEM_KEEP(exit.data*) \ + *(.data.unlikely) \ + __start_once = .; \ + *(.data.once) \ + __end_once = .; \ + STRUCT_ALIGN(); \ + *(__tracepoints) \ + /* implement dynamic printk debug */ \ + . = ALIGN(8); \ + __start___dyndbg = .; \ + KEEP(*(__dyndbg)) \ + __stop___dyndbg = .; \ + LIKELY_PROFILE() \ + BRANCH_PROFILE() \ + TRACE_PRINTKS() \ + BPF_RAW_TP() \ + TRACEPOINT_STR() + +/* + * Data section helpers + */ +#define NOSAVE_DATA \ + . = ALIGN(PAGE_SIZE); \ + __nosave_begin = .; \ + *(.data..nosave) \ + . = ALIGN(PAGE_SIZE); \ + __nosave_end = .; + +#define PAGE_ALIGNED_DATA(page_align) \ + . = ALIGN(page_align); \ + *(.data..page_aligned) \ + . = ALIGN(page_align); + +#define READ_MOSTLY_DATA(align) \ + . = ALIGN(align); \ + *(.data..read_mostly) \ + . = ALIGN(align); + +#define CACHELINE_ALIGNED_DATA(align) \ + . = ALIGN(align); \ + *(.data..cacheline_aligned) + +#define INIT_TASK_DATA(align) \ + . = ALIGN(align); \ + __start_init_task = .; \ + init_thread_union = .; \ + init_stack = .; \ + KEEP(*(.data..init_task)) \ + KEEP(*(.data..init_thread_info)) \ + . = __start_init_task + THREAD_SIZE; \ + __end_init_task = .; + +#define JUMP_TABLE_DATA \ + . = ALIGN(8); \ + __start___jump_table = .; \ + KEEP(*(__jump_table)) \ + __stop___jump_table = .; + +#define STATIC_CALL_DATA \ + . = ALIGN(8); \ + __start_static_call_sites = .; \ + KEEP(*(.static_call_sites)) \ + __stop_static_call_sites = .; \ + __start_static_call_tramp_key = .; \ + KEEP(*(.static_call_tramp_key)) \ + __stop_static_call_tramp_key = .; + +/* + * Allow architectures to handle ro_after_init data on their + * own by defining an empty RO_AFTER_INIT_DATA. + */ +#ifndef RO_AFTER_INIT_DATA +#define RO_AFTER_INIT_DATA \ + . = ALIGN(8); \ + __start_ro_after_init = .; \ + *(.data..ro_after_init) \ + JUMP_TABLE_DATA \ + STATIC_CALL_DATA \ + __end_ro_after_init = .; +#endif + +/* + * Read only Data + */ +#define RO_DATA(align) \ + . = ALIGN((align)); \ + .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ + __start_rodata = .; \ + *(.rodata) *(.rodata.*) \ + SCHED_DATA \ + RO_AFTER_INIT_DATA /* Read only after init */ \ + . = ALIGN(8); \ + __start___tracepoints_ptrs = .; \ + KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \ + __stop___tracepoints_ptrs = .; \ + *(__tracepoints_strings)/* Tracepoints: strings */ \ + } \ + \ + .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \ + *(.rodata1) \ + } \ + \ + /* PCI quirks */ \ + .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ + __start_pci_fixups_early = .; \ + KEEP(*(.pci_fixup_early)) \ + __end_pci_fixups_early = .; \ + __start_pci_fixups_header = .; \ + KEEP(*(.pci_fixup_header)) \ + __end_pci_fixups_header = .; \ + __start_pci_fixups_final = .; \ + KEEP(*(.pci_fixup_final)) \ + __end_pci_fixups_final = .; \ + __start_pci_fixups_enable = .; \ + KEEP(*(.pci_fixup_enable)) \ + __end_pci_fixups_enable = .; \ + __start_pci_fixups_resume = .; \ + KEEP(*(.pci_fixup_resume)) \ + __end_pci_fixups_resume = .; \ + __start_pci_fixups_resume_early = .; \ + KEEP(*(.pci_fixup_resume_early)) \ + __end_pci_fixups_resume_early = .; \ + __start_pci_fixups_suspend = .; \ + KEEP(*(.pci_fixup_suspend)) \ + __end_pci_fixups_suspend = .; \ + __start_pci_fixups_suspend_late = .; \ + KEEP(*(.pci_fixup_suspend_late)) \ + __end_pci_fixups_suspend_late = .; \ + } \ + \ + /* Built-in firmware blobs */ \ + .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) ALIGN(8) { \ + __start_builtin_fw = .; \ + KEEP(*(.builtin_fw)) \ + __end_builtin_fw = .; \ + } \ + \ + TRACEDATA \ + \ + /* Kernel symbol table: Normal symbols */ \ + __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ + __start___ksymtab = .; \ + KEEP(*(SORT(___ksymtab+*))) \ + __stop___ksymtab = .; \ + } \ + \ + /* Kernel symbol table: GPL-only symbols */ \ + __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ + __start___ksymtab_gpl = .; \ + KEEP(*(SORT(___ksymtab_gpl+*))) \ + __stop___ksymtab_gpl = .; \ + } \ + \ + /* Kernel symbol table: Normal unused symbols */ \ + __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \ + __start___ksymtab_unused = .; \ + KEEP(*(SORT(___ksymtab_unused+*))) \ + __stop___ksymtab_unused = .; \ + } \ + \ + /* Kernel symbol table: GPL-only unused symbols */ \ + __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \ + __start___ksymtab_unused_gpl = .; \ + KEEP(*(SORT(___ksymtab_unused_gpl+*))) \ + __stop___ksymtab_unused_gpl = .; \ + } \ + \ + /* Kernel symbol table: GPL-future-only symbols */ \ + __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \ + __start___ksymtab_gpl_future = .; \ + KEEP(*(SORT(___ksymtab_gpl_future+*))) \ + __stop___ksymtab_gpl_future = .; \ + } \ + \ + /* Kernel symbol table: Normal symbols */ \ + __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \ + __start___kcrctab = .; \ + KEEP(*(SORT(___kcrctab+*))) \ + __stop___kcrctab = .; \ + } \ + \ + /* Kernel symbol table: GPL-only symbols */ \ + __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \ + __start___kcrctab_gpl = .; \ + KEEP(*(SORT(___kcrctab_gpl+*))) \ + __stop___kcrctab_gpl = .; \ + } \ + \ + /* Kernel symbol table: Normal unused symbols */ \ + __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \ + __start___kcrctab_unused = .; \ + KEEP(*(SORT(___kcrctab_unused+*))) \ + __stop___kcrctab_unused = .; \ + } \ + \ + /* Kernel symbol table: GPL-only unused symbols */ \ + __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \ + __start___kcrctab_unused_gpl = .; \ + KEEP(*(SORT(___kcrctab_unused_gpl+*))) \ + __stop___kcrctab_unused_gpl = .; \ + } \ + \ + /* Kernel symbol table: GPL-future-only symbols */ \ + __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \ + __start___kcrctab_gpl_future = .; \ + KEEP(*(SORT(___kcrctab_gpl_future+*))) \ + __stop___kcrctab_gpl_future = .; \ + } \ + \ + /* Kernel symbol table: strings */ \ + __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ + *(__ksymtab_strings) \ + } \ + \ + /* __*init sections */ \ + __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \ + *(.ref.rodata) \ + MEM_KEEP(init.rodata) \ + MEM_KEEP(exit.rodata) \ + } \ + \ + /* Built-in module parameters. */ \ + __param : AT(ADDR(__param) - LOAD_OFFSET) { \ + __start___param = .; \ + KEEP(*(__param)) \ + __stop___param = .; \ + } \ + \ + /* Built-in module versions. */ \ + __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \ + __start___modver = .; \ + KEEP(*(__modver)) \ + __stop___modver = .; \ + } \ + \ + RO_EXCEPTION_TABLE \ + NOTES \ + BTF \ + \ + . = ALIGN((align)); \ + __end_rodata = .; + +/* + * Non-instrumentable text section + */ +#define NOINSTR_TEXT \ + ALIGN_FUNCTION(); \ + __noinstr_text_start = .; \ + *(.noinstr.text) \ + __noinstr_text_end = .; + +/* + * .text section. Map to function alignment to avoid address changes + * during second ld run in second ld pass when generating System.map + * + * TEXT_MAIN here will match .text.fixup and .text.unlikely if dead + * code elimination is enabled, so these sections should be converted + * to use ".." first. + */ +#define TEXT_TEXT \ + ALIGN_FUNCTION(); \ + *(.text.hot .text.hot.*) \ + *(TEXT_MAIN .text.fixup) \ + *(.text.unlikely .text.unlikely.*) \ + *(.text.unknown .text.unknown.*) \ + NOINSTR_TEXT \ + *(.text..refcount) \ + *(.ref.text) \ + *(.text.asan.* .text.tsan.*) \ + MEM_KEEP(init.text*) \ + MEM_KEEP(exit.text*) \ + + +/* sched.text is aling to function alignment to secure we have same + * address even at second ld pass when generating System.map */ +#define SCHED_TEXT \ + ALIGN_FUNCTION(); \ + __sched_text_start = .; \ + *(.sched.text) \ + __sched_text_end = .; + +/* spinlock.text is aling to function alignment to secure we have same + * address even at second ld pass when generating System.map */ +#define LOCK_TEXT \ + ALIGN_FUNCTION(); \ + __lock_text_start = .; \ + *(.spinlock.text) \ + __lock_text_end = .; + +#define CPUIDLE_TEXT \ + ALIGN_FUNCTION(); \ + __cpuidle_text_start = .; \ + *(.cpuidle.text) \ + __cpuidle_text_end = .; + +#define KPROBES_TEXT \ + ALIGN_FUNCTION(); \ + __kprobes_text_start = .; \ + *(.kprobes.text) \ + __kprobes_text_end = .; + +#define ENTRY_TEXT \ + ALIGN_FUNCTION(); \ + __entry_text_start = .; \ + *(.entry.text) \ + __entry_text_end = .; + +#define IRQENTRY_TEXT \ + ALIGN_FUNCTION(); \ + __irqentry_text_start = .; \ + *(.irqentry.text) \ + __irqentry_text_end = .; + +#define SOFTIRQENTRY_TEXT \ + ALIGN_FUNCTION(); \ + __softirqentry_text_start = .; \ + *(.softirqentry.text) \ + __softirqentry_text_end = .; + +#define STATIC_CALL_TEXT \ + ALIGN_FUNCTION(); \ + __static_call_text_start = .; \ + *(.static_call.text) \ + __static_call_text_end = .; + +/* Section used for early init (in .S files) */ +#define HEAD_TEXT KEEP(*(.head.text)) + +#define HEAD_TEXT_SECTION \ + .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \ + HEAD_TEXT \ + } + +/* + * Exception table + */ +#define EXCEPTION_TABLE(align) \ + . = ALIGN(align); \ + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \ + __start___ex_table = .; \ + KEEP(*(__ex_table)) \ + __stop___ex_table = .; \ + } + +/* + * .BTF + */ +#ifdef CONFIG_DEBUG_INFO_BTF +#define BTF \ + .BTF : AT(ADDR(.BTF) - LOAD_OFFSET) { \ + __start_BTF = .; \ + KEEP(*(.BTF)) \ + __stop_BTF = .; \ + } \ + . = ALIGN(4); \ + .BTF_ids : AT(ADDR(.BTF_ids) - LOAD_OFFSET) { \ + *(.BTF_ids) \ + } +#else +#define BTF +#endif + +/* + * Init task + */ +#define INIT_TASK_DATA_SECTION(align) \ + . = ALIGN(align); \ + .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \ + INIT_TASK_DATA(align) \ + } + +#ifdef CONFIG_CONSTRUCTORS +#define KERNEL_CTORS() . = ALIGN(8); \ + __ctors_start = .; \ + KEEP(*(SORT(.ctors.*))) \ + KEEP(*(.ctors)) \ + KEEP(*(SORT(.init_array.*))) \ + KEEP(*(.init_array)) \ + __ctors_end = .; +#else +#define KERNEL_CTORS() +#endif + +/* init and exit section handling */ +#define INIT_DATA \ + KEEP(*(SORT(___kentry+*))) \ + *(.init.data init.data.*) \ + MEM_DISCARD(init.data*) \ + KERNEL_CTORS() \ + MCOUNT_REC() \ + *(.init.rodata .init.rodata.*) \ + FTRACE_EVENTS() \ + TRACE_SYSCALLS() \ + KPROBE_BLACKLIST() \ + ERROR_INJECT_WHITELIST() \ + MEM_DISCARD(init.rodata) \ + CLK_OF_TABLES() \ + RESERVEDMEM_OF_TABLES() \ + TIMER_OF_TABLES() \ + CPU_METHOD_OF_TABLES() \ + CPUIDLE_METHOD_OF_TABLES() \ + KERNEL_DTB() \ + IRQCHIP_OF_MATCH_TABLE() \ + ACPI_PROBE_TABLE(irqchip) \ + ACPI_PROBE_TABLE(timer) \ + THERMAL_TABLE(governor) \ + EARLYCON_TABLE() \ + LSM_TABLE() \ + EARLY_LSM_TABLE() \ + KUNIT_TABLE() + +#define INIT_TEXT \ + *(.init.text .init.text.*) \ + *(.text.startup) \ + MEM_DISCARD(init.text*) + +#define EXIT_DATA \ + *(.exit.data .exit.data.*) \ + *(.fini_array .fini_array.*) \ + *(.dtors .dtors.*) \ + MEM_DISCARD(exit.data*) \ + MEM_DISCARD(exit.rodata*) + +#define EXIT_TEXT \ + *(.exit.text) \ + *(.text.exit) \ + MEM_DISCARD(exit.text) + +#define EXIT_CALL \ + *(.exitcall.exit) + +/* + * bss (Block Started by Symbol) - uninitialized data + * zeroed during startup + */ +#define SBSS(sbss_align) \ + . = ALIGN(sbss_align); \ + .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \ + *(.dynsbss) \ + *(SBSS_MAIN) \ + *(.scommon) \ + } + +/* + * Allow archectures to redefine BSS_FIRST_SECTIONS to add extra + * sections to the front of bss. + */ +#ifndef BSS_FIRST_SECTIONS +#define BSS_FIRST_SECTIONS +#endif + +#define BSS(bss_align) \ + . = ALIGN(bss_align); \ + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \ + BSS_FIRST_SECTIONS \ + . = ALIGN(PAGE_SIZE); \ + *(.bss..page_aligned) \ + . = ALIGN(PAGE_SIZE); \ + *(.dynbss) \ + *(BSS_MAIN) \ + *(COMMON) \ + } + +/* + * DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to + * the beginning of the section so we begin them at 0. + */ +#define DWARF_DEBUG \ + /* DWARF 1 */ \ + .debug 0 : { *(.debug) } \ + .line 0 : { *(.line) } \ + /* GNU DWARF 1 extensions */ \ + .debug_srcinfo 0 : { *(.debug_srcinfo) } \ + .debug_sfnames 0 : { *(.debug_sfnames) } \ + /* DWARF 1.1 and DWARF 2 */ \ + .debug_aranges 0 : { *(.debug_aranges) } \ + .debug_pubnames 0 : { *(.debug_pubnames) } \ + /* DWARF 2 */ \ + .debug_info 0 : { *(.debug_info \ + .gnu.linkonce.wi.*) } \ + .debug_abbrev 0 : { *(.debug_abbrev) } \ + .debug_line 0 : { *(.debug_line) } \ + .debug_frame 0 : { *(.debug_frame) } \ + .debug_str 0 : { *(.debug_str) } \ + .debug_loc 0 : { *(.debug_loc) } \ + .debug_macinfo 0 : { *(.debug_macinfo) } \ + .debug_pubtypes 0 : { *(.debug_pubtypes) } \ + /* DWARF 3 */ \ + .debug_ranges 0 : { *(.debug_ranges) } \ + /* SGI/MIPS DWARF 2 extensions */ \ + .debug_weaknames 0 : { *(.debug_weaknames) } \ + .debug_funcnames 0 : { *(.debug_funcnames) } \ + .debug_typenames 0 : { *(.debug_typenames) } \ + .debug_varnames 0 : { *(.debug_varnames) } \ + /* GNU DWARF 2 extensions */ \ + .debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) } \ + .debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) } \ + /* DWARF 4 */ \ + .debug_types 0 : { *(.debug_types) } \ + /* DWARF 5 */ \ + .debug_addr 0 : { *(.debug_addr) } \ + .debug_line_str 0 : { *(.debug_line_str) } \ + .debug_loclists 0 : { *(.debug_loclists) } \ + .debug_macro 0 : { *(.debug_macro) } \ + .debug_names 0 : { *(.debug_names) } \ + .debug_rnglists 0 : { *(.debug_rnglists) } \ + .debug_str_offsets 0 : { *(.debug_str_offsets) } + +/* Stabs debugging sections. */ +#define STABS_DEBUG \ + .stab 0 : { *(.stab) } \ + .stabstr 0 : { *(.stabstr) } \ + .stab.excl 0 : { *(.stab.excl) } \ + .stab.exclstr 0 : { *(.stab.exclstr) } \ + .stab.index 0 : { *(.stab.index) } \ + .stab.indexstr 0 : { *(.stab.indexstr) } + +/* Required sections not related to debugging. */ +#define ELF_DETAILS \ + .comment 0 : { *(.comment) } \ + .symtab 0 : { *(.symtab) } \ + .strtab 0 : { *(.strtab) } \ + .shstrtab 0 : { *(.shstrtab) } + +#ifdef CONFIG_GENERIC_BUG +#define BUG_TABLE \ + . = ALIGN(8); \ + __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ + __start___bug_table = .; \ + KEEP(*(__bug_table)) \ + __stop___bug_table = .; \ + } +#else +#define BUG_TABLE +#endif + +#ifdef CONFIG_UNWINDER_ORC +#define ORC_UNWIND_TABLE \ + . = ALIGN(4); \ + .orc_unwind_ip : AT(ADDR(.orc_unwind_ip) - LOAD_OFFSET) { \ + __start_orc_unwind_ip = .; \ + KEEP(*(.orc_unwind_ip)) \ + __stop_orc_unwind_ip = .; \ + } \ + . = ALIGN(2); \ + .orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) { \ + __start_orc_unwind = .; \ + KEEP(*(.orc_unwind)) \ + __stop_orc_unwind = .; \ + } \ + . = ALIGN(4); \ + .orc_lookup : AT(ADDR(.orc_lookup) - LOAD_OFFSET) { \ + orc_lookup = .; \ + . += (((SIZEOF(.text) + LOOKUP_BLOCK_SIZE - 1) / \ + LOOKUP_BLOCK_SIZE) + 1) * 4; \ + orc_lookup_end = .; \ + } +#else +#define ORC_UNWIND_TABLE +#endif + +#ifdef CONFIG_PM_TRACE +#define TRACEDATA \ + . = ALIGN(4); \ + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ + __tracedata_start = .; \ + KEEP(*(.tracedata)) \ + __tracedata_end = .; \ + } +#else +#define TRACEDATA +#endif + +/* + * Discard .note.GNU-stack, which is emitted as PROGBITS by the compiler. + * Otherwise, the type of .notes section would become PROGBITS instead of NOTES. + */ +#define NOTES \ + /DISCARD/ : { *(.note.GNU-stack) } \ + .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ + __start_notes = .; \ + KEEP(*(.note.*)) \ + __stop_notes = .; \ + } NOTES_HEADERS \ + NOTES_HEADERS_RESTORE + +#define INIT_SETUP(initsetup_align) \ + . = ALIGN(initsetup_align); \ + __setup_start = .; \ + KEEP(*(.init.setup)) \ + __setup_end = .; + +#define INIT_CALLS_LEVEL(level) \ + __initcall##level##_start = .; \ + KEEP(*(.initcall##level##.init)) \ + KEEP(*(.initcall##level##s.init)) \ + +#define INIT_CALLS \ + __initcall_start = .; \ + KEEP(*(.initcallearly.init)) \ + INIT_CALLS_LEVEL(0) \ + INIT_CALLS_LEVEL(1) \ + INIT_CALLS_LEVEL(2) \ + INIT_CALLS_LEVEL(3) \ + INIT_CALLS_LEVEL(4) \ + INIT_CALLS_LEVEL(5) \ + INIT_CALLS_LEVEL(rootfs) \ + INIT_CALLS_LEVEL(6) \ + INIT_CALLS_LEVEL(7) \ + __initcall_end = .; + +#define CON_INITCALL \ + __con_initcall_start = .; \ + KEEP(*(.con_initcall.init)) \ + __con_initcall_end = .; + +/* Alignment must be consistent with (kunit_suite *) in include/kunit/test.h */ +#define KUNIT_TABLE() \ + . = ALIGN(8); \ + __kunit_suites_start = .; \ + KEEP(*(.kunit_test_suites)) \ + __kunit_suites_end = .; + +#ifdef CONFIG_BLK_DEV_INITRD +#define INIT_RAM_FS \ + . = ALIGN(4); \ + __initramfs_start = .; \ + KEEP(*(.init.ramfs)) \ + . = ALIGN(8); \ + KEEP(*(.init.ramfs.info)) +#else +#define INIT_RAM_FS +#endif + +/* + * Memory encryption operates on a page basis. Since we need to clear + * the memory encryption mask for this section, it needs to be aligned + * on a page boundary and be a page-size multiple in length. + * + * Note: We use a separate section so that only this section gets + * decrypted to avoid exposing more than we wish. + */ +#ifdef CONFIG_AMD_MEM_ENCRYPT +#define PERCPU_DECRYPTED_SECTION \ + . = ALIGN(PAGE_SIZE); \ + *(.data..percpu..decrypted) \ + . = ALIGN(PAGE_SIZE); +#else +#define PERCPU_DECRYPTED_SECTION +#endif + + +/* + * Default discarded sections. + * + * Some archs want to discard exit text/data at runtime rather than + * link time due to cross-section references such as alt instructions, + * bug table, eh_frame, etc. DISCARDS must be the last of output + * section definitions so that such archs put those in earlier section + * definitions. + */ +#ifdef RUNTIME_DISCARD_EXIT +#define EXIT_DISCARDS +#else +#define EXIT_DISCARDS \ + EXIT_TEXT \ + EXIT_DATA +#endif + +/* + * Clang's -fprofile-arcs, -fsanitize=kernel-address, and + * -fsanitize=thread produce unwanted sections (.eh_frame + * and .init_array.*), but CONFIG_CONSTRUCTORS wants to + * keep any .init_array.* sections. + * https://bugs.llvm.org/show_bug.cgi?id=46478 + */ +#if defined(CONFIG_GCOV_KERNEL) || defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KCSAN) +# ifdef CONFIG_CONSTRUCTORS +# define SANITIZER_DISCARDS \ + *(.eh_frame) +# else +# define SANITIZER_DISCARDS \ + *(.init_array) *(.init_array.*) \ + *(.eh_frame) +# endif +#else +# define SANITIZER_DISCARDS +#endif + +#define COMMON_DISCARDS \ + SANITIZER_DISCARDS \ + *(.discard) \ + *(.discard.*) \ + *(.modinfo) \ + /* ld.bfd warns about .gnu.version* even when not emitted */ \ + *(.gnu.version*) \ + +#define DISCARDS \ + /DISCARD/ : { \ + EXIT_DISCARDS \ + EXIT_CALL \ + COMMON_DISCARDS \ + } + +/** + * PERCPU_INPUT - the percpu input sections + * @cacheline: cacheline size + * + * The core percpu section names and core symbols which do not rely + * directly upon load addresses. + * + * @cacheline is used to align subsections to avoid false cacheline + * sharing between subsections for different purposes. + */ +#define PERCPU_INPUT(cacheline) \ + __per_cpu_start = .; \ + *(.data..percpu..first) \ + . = ALIGN(PAGE_SIZE); \ + *(.data..percpu..page_aligned) \ + . = ALIGN(cacheline); \ + *(.data..percpu..read_mostly) \ + . = ALIGN(cacheline); \ + *(.data..percpu) \ + *(.data..percpu..shared_aligned) \ + PERCPU_DECRYPTED_SECTION \ + __per_cpu_end = .; + +/** + * PERCPU_VADDR - define output section for percpu area + * @cacheline: cacheline size + * @vaddr: explicit base address (optional) + * @phdr: destination PHDR (optional) + * + * Macro which expands to output section for percpu area. + * + * @cacheline is used to align subsections to avoid false cacheline + * sharing between subsections for different purposes. + * + * If @vaddr is not blank, it specifies explicit base address and all + * percpu symbols will be offset from the given address. If blank, + * @vaddr always equals @laddr + LOAD_OFFSET. + * + * @phdr defines the output PHDR to use if not blank. Be warned that + * output PHDR is sticky. If @phdr is specified, the next output + * section in the linker script will go there too. @phdr should have + * a leading colon. + * + * Note that this macros defines __per_cpu_load as an absolute symbol. + * If there is no need to put the percpu section at a predetermined + * address, use PERCPU_SECTION. + */ +#define PERCPU_VADDR(cacheline, vaddr, phdr) \ + __per_cpu_load = .; \ + .data..percpu vaddr : AT(__per_cpu_load - LOAD_OFFSET) { \ + PERCPU_INPUT(cacheline) \ + } phdr \ + . = __per_cpu_load + SIZEOF(.data..percpu); + +/** + * PERCPU_SECTION - define output section for percpu area, simple version + * @cacheline: cacheline size + * + * Align to PAGE_SIZE and outputs output section for percpu area. This + * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and + * __per_cpu_start will be identical. + * + * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,) + * except that __per_cpu_load is defined as a relative symbol against + * .data..percpu which is required for relocatable x86_32 configuration. + */ +#define PERCPU_SECTION(cacheline) \ + . = ALIGN(PAGE_SIZE); \ + .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \ + __per_cpu_load = .; \ + PERCPU_INPUT(cacheline) \ + } + + +/* + * Definition of the high level *_SECTION macros + * They will fit only a subset of the architectures + */ + + +/* + * Writeable data. + * All sections are combined in a single .data section. + * The sections following CONSTRUCTORS are arranged so their + * typical alignment matches. + * A cacheline is typical/always less than a PAGE_SIZE so + * the sections that has this restriction (or similar) + * is located before the ones requiring PAGE_SIZE alignment. + * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which + * matches the requirement of PAGE_ALIGNED_DATA. + * + * use 0 as page_align if page_aligned data is not used */ +#define RW_DATA(cacheline, pagealigned, inittask) \ + . = ALIGN(PAGE_SIZE); \ + .data : AT(ADDR(.data) - LOAD_OFFSET) { \ + INIT_TASK_DATA(inittask) \ + NOSAVE_DATA \ + PAGE_ALIGNED_DATA(pagealigned) \ + CACHELINE_ALIGNED_DATA(cacheline) \ + READ_MOSTLY_DATA(cacheline) \ + DATA_DATA \ + CONSTRUCTORS \ + } \ + BUG_TABLE \ + +#define INIT_TEXT_SECTION(inittext_align) \ + . = ALIGN(inittext_align); \ + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \ + _sinittext = .; \ + INIT_TEXT \ + _einittext = .; \ + } + +#define INIT_DATA_SECTION(initsetup_align) \ + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \ + INIT_DATA \ + INIT_SETUP(initsetup_align) \ + INIT_CALLS \ + CON_INITCALL \ + INIT_RAM_FS \ + } + +#define BSS_SECTION(sbss_align, bss_align, stop_align) \ + . = ALIGN(sbss_align); \ + __bss_start = .; \ + SBSS(sbss_align) \ + BSS(bss_align) \ + . = ALIGN(stop_align); \ + __bss_stop = .; -- cgit v1.2.3