From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 12:05:51 +0200 Subject: Adding upstream version 5.10.209. Signed-off-by: Daniel Baumann --- include/uapi/misc/habanalabs.h | 1002 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1002 insertions(+) create mode 100644 include/uapi/misc/habanalabs.h (limited to 'include/uapi/misc/habanalabs.h') diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h new file mode 100644 index 000000000..9705b8adb --- /dev/null +++ b/include/uapi/misc/habanalabs.h @@ -0,0 +1,1002 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + * + * Copyright 2016-2020 HabanaLabs, Ltd. + * All Rights Reserved. + * + */ + +#ifndef HABANALABS_H_ +#define HABANALABS_H_ + +#include +#include + +/* + * Defines that are asic-specific but constitutes as ABI between kernel driver + * and userspace + */ +#define GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START 0x8000 /* 32KB */ +#define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80 /* 128 bytes */ + +#define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 48 +#define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 24 +/* + * Goya queue Numbering + * + * The external queues (PCI DMA channels) MUST be before the internal queues + * and each group (PCI DMA channels and internal) must be contiguous inside + * itself but there can be a gap between the two groups (although not + * recommended) + */ + +enum goya_queue_id { + GOYA_QUEUE_ID_DMA_0 = 0, + GOYA_QUEUE_ID_DMA_1 = 1, + GOYA_QUEUE_ID_DMA_2 = 2, + GOYA_QUEUE_ID_DMA_3 = 3, + GOYA_QUEUE_ID_DMA_4 = 4, + GOYA_QUEUE_ID_CPU_PQ = 5, + GOYA_QUEUE_ID_MME = 6, /* Internal queues start here */ + GOYA_QUEUE_ID_TPC0 = 7, + GOYA_QUEUE_ID_TPC1 = 8, + GOYA_QUEUE_ID_TPC2 = 9, + GOYA_QUEUE_ID_TPC3 = 10, + GOYA_QUEUE_ID_TPC4 = 11, + GOYA_QUEUE_ID_TPC5 = 12, + GOYA_QUEUE_ID_TPC6 = 13, + GOYA_QUEUE_ID_TPC7 = 14, + GOYA_QUEUE_ID_SIZE +}; + +/* + * Gaudi queue Numbering + * External queues (PCI DMA channels) are DMA_0_*, DMA_1_* and DMA_5_*. + * Except one CPU queue, all the rest are internal queues. + */ + +enum gaudi_queue_id { + GAUDI_QUEUE_ID_DMA_0_0 = 0, /* external */ + GAUDI_QUEUE_ID_DMA_0_1 = 1, /* external */ + GAUDI_QUEUE_ID_DMA_0_2 = 2, /* external */ + GAUDI_QUEUE_ID_DMA_0_3 = 3, /* external */ + GAUDI_QUEUE_ID_DMA_1_0 = 4, /* external */ + GAUDI_QUEUE_ID_DMA_1_1 = 5, /* external */ + GAUDI_QUEUE_ID_DMA_1_2 = 6, /* external */ + GAUDI_QUEUE_ID_DMA_1_3 = 7, /* external */ + GAUDI_QUEUE_ID_CPU_PQ = 8, /* CPU */ + GAUDI_QUEUE_ID_DMA_2_0 = 9, /* internal */ + GAUDI_QUEUE_ID_DMA_2_1 = 10, /* internal */ + GAUDI_QUEUE_ID_DMA_2_2 = 11, /* internal */ + GAUDI_QUEUE_ID_DMA_2_3 = 12, /* internal */ + GAUDI_QUEUE_ID_DMA_3_0 = 13, /* internal */ + GAUDI_QUEUE_ID_DMA_3_1 = 14, /* internal */ + GAUDI_QUEUE_ID_DMA_3_2 = 15, /* internal */ + GAUDI_QUEUE_ID_DMA_3_3 = 16, /* internal */ + GAUDI_QUEUE_ID_DMA_4_0 = 17, /* internal */ + GAUDI_QUEUE_ID_DMA_4_1 = 18, /* internal */ + GAUDI_QUEUE_ID_DMA_4_2 = 19, /* internal */ + GAUDI_QUEUE_ID_DMA_4_3 = 20, /* internal */ + GAUDI_QUEUE_ID_DMA_5_0 = 21, /* external */ + GAUDI_QUEUE_ID_DMA_5_1 = 22, /* external */ + GAUDI_QUEUE_ID_DMA_5_2 = 23, /* external */ + GAUDI_QUEUE_ID_DMA_5_3 = 24, /* external */ + GAUDI_QUEUE_ID_DMA_6_0 = 25, /* internal */ + GAUDI_QUEUE_ID_DMA_6_1 = 26, /* internal */ + GAUDI_QUEUE_ID_DMA_6_2 = 27, /* internal */ + GAUDI_QUEUE_ID_DMA_6_3 = 28, /* internal */ + GAUDI_QUEUE_ID_DMA_7_0 = 29, /* internal */ + GAUDI_QUEUE_ID_DMA_7_1 = 30, /* internal */ + GAUDI_QUEUE_ID_DMA_7_2 = 31, /* internal */ + GAUDI_QUEUE_ID_DMA_7_3 = 32, /* internal */ + GAUDI_QUEUE_ID_MME_0_0 = 33, /* internal */ + GAUDI_QUEUE_ID_MME_0_1 = 34, /* internal */ + GAUDI_QUEUE_ID_MME_0_2 = 35, /* internal */ + GAUDI_QUEUE_ID_MME_0_3 = 36, /* internal */ + GAUDI_QUEUE_ID_MME_1_0 = 37, /* internal */ + GAUDI_QUEUE_ID_MME_1_1 = 38, /* internal */ + GAUDI_QUEUE_ID_MME_1_2 = 39, /* internal */ + GAUDI_QUEUE_ID_MME_1_3 = 40, /* internal */ + GAUDI_QUEUE_ID_TPC_0_0 = 41, /* internal */ + GAUDI_QUEUE_ID_TPC_0_1 = 42, /* internal */ + GAUDI_QUEUE_ID_TPC_0_2 = 43, /* internal */ + GAUDI_QUEUE_ID_TPC_0_3 = 44, /* internal */ + GAUDI_QUEUE_ID_TPC_1_0 = 45, /* internal */ + GAUDI_QUEUE_ID_TPC_1_1 = 46, /* internal */ + GAUDI_QUEUE_ID_TPC_1_2 = 47, /* internal */ + GAUDI_QUEUE_ID_TPC_1_3 = 48, /* internal */ + GAUDI_QUEUE_ID_TPC_2_0 = 49, /* internal */ + GAUDI_QUEUE_ID_TPC_2_1 = 50, /* internal */ + GAUDI_QUEUE_ID_TPC_2_2 = 51, /* internal */ + GAUDI_QUEUE_ID_TPC_2_3 = 52, /* internal */ + GAUDI_QUEUE_ID_TPC_3_0 = 53, /* internal */ + GAUDI_QUEUE_ID_TPC_3_1 = 54, /* internal */ + GAUDI_QUEUE_ID_TPC_3_2 = 55, /* internal */ + GAUDI_QUEUE_ID_TPC_3_3 = 56, /* internal */ + GAUDI_QUEUE_ID_TPC_4_0 = 57, /* internal */ + GAUDI_QUEUE_ID_TPC_4_1 = 58, /* internal */ + GAUDI_QUEUE_ID_TPC_4_2 = 59, /* internal */ + GAUDI_QUEUE_ID_TPC_4_3 = 60, /* internal */ + GAUDI_QUEUE_ID_TPC_5_0 = 61, /* internal */ + GAUDI_QUEUE_ID_TPC_5_1 = 62, /* internal */ + GAUDI_QUEUE_ID_TPC_5_2 = 63, /* internal */ + GAUDI_QUEUE_ID_TPC_5_3 = 64, /* internal */ + GAUDI_QUEUE_ID_TPC_6_0 = 65, /* internal */ + GAUDI_QUEUE_ID_TPC_6_1 = 66, /* internal */ + GAUDI_QUEUE_ID_TPC_6_2 = 67, /* internal */ + GAUDI_QUEUE_ID_TPC_6_3 = 68, /* internal */ + GAUDI_QUEUE_ID_TPC_7_0 = 69, /* internal */ + GAUDI_QUEUE_ID_TPC_7_1 = 70, /* internal */ + GAUDI_QUEUE_ID_TPC_7_2 = 71, /* internal */ + GAUDI_QUEUE_ID_TPC_7_3 = 72, /* internal */ + GAUDI_QUEUE_ID_NIC_0_0 = 73, /* internal */ + GAUDI_QUEUE_ID_NIC_0_1 = 74, /* internal */ + GAUDI_QUEUE_ID_NIC_0_2 = 75, /* internal */ + GAUDI_QUEUE_ID_NIC_0_3 = 76, /* internal */ + GAUDI_QUEUE_ID_NIC_1_0 = 77, /* internal */ + GAUDI_QUEUE_ID_NIC_1_1 = 78, /* internal */ + GAUDI_QUEUE_ID_NIC_1_2 = 79, /* internal */ + GAUDI_QUEUE_ID_NIC_1_3 = 80, /* internal */ + GAUDI_QUEUE_ID_NIC_2_0 = 81, /* internal */ + GAUDI_QUEUE_ID_NIC_2_1 = 82, /* internal */ + GAUDI_QUEUE_ID_NIC_2_2 = 83, /* internal */ + GAUDI_QUEUE_ID_NIC_2_3 = 84, /* internal */ + GAUDI_QUEUE_ID_NIC_3_0 = 85, /* internal */ + GAUDI_QUEUE_ID_NIC_3_1 = 86, /* internal */ + GAUDI_QUEUE_ID_NIC_3_2 = 87, /* internal */ + GAUDI_QUEUE_ID_NIC_3_3 = 88, /* internal */ + GAUDI_QUEUE_ID_NIC_4_0 = 89, /* internal */ + GAUDI_QUEUE_ID_NIC_4_1 = 90, /* internal */ + GAUDI_QUEUE_ID_NIC_4_2 = 91, /* internal */ + GAUDI_QUEUE_ID_NIC_4_3 = 92, /* internal */ + GAUDI_QUEUE_ID_NIC_5_0 = 93, /* internal */ + GAUDI_QUEUE_ID_NIC_5_1 = 94, /* internal */ + GAUDI_QUEUE_ID_NIC_5_2 = 95, /* internal */ + GAUDI_QUEUE_ID_NIC_5_3 = 96, /* internal */ + GAUDI_QUEUE_ID_NIC_6_0 = 97, /* internal */ + GAUDI_QUEUE_ID_NIC_6_1 = 98, /* internal */ + GAUDI_QUEUE_ID_NIC_6_2 = 99, /* internal */ + GAUDI_QUEUE_ID_NIC_6_3 = 100, /* internal */ + GAUDI_QUEUE_ID_NIC_7_0 = 101, /* internal */ + GAUDI_QUEUE_ID_NIC_7_1 = 102, /* internal */ + GAUDI_QUEUE_ID_NIC_7_2 = 103, /* internal */ + GAUDI_QUEUE_ID_NIC_7_3 = 104, /* internal */ + GAUDI_QUEUE_ID_NIC_8_0 = 105, /* internal */ + GAUDI_QUEUE_ID_NIC_8_1 = 106, /* internal */ + GAUDI_QUEUE_ID_NIC_8_2 = 107, /* internal */ + GAUDI_QUEUE_ID_NIC_8_3 = 108, /* internal */ + GAUDI_QUEUE_ID_NIC_9_0 = 109, /* internal */ + GAUDI_QUEUE_ID_NIC_9_1 = 110, /* internal */ + GAUDI_QUEUE_ID_NIC_9_2 = 111, /* internal */ + GAUDI_QUEUE_ID_NIC_9_3 = 112, /* internal */ + GAUDI_QUEUE_ID_SIZE +}; + +/* + * Engine Numbering + * + * Used in the "busy_engines_mask" field in `struct hl_info_hw_idle' + */ + +enum goya_engine_id { + GOYA_ENGINE_ID_DMA_0 = 0, + GOYA_ENGINE_ID_DMA_1, + GOYA_ENGINE_ID_DMA_2, + GOYA_ENGINE_ID_DMA_3, + GOYA_ENGINE_ID_DMA_4, + GOYA_ENGINE_ID_MME_0, + GOYA_ENGINE_ID_TPC_0, + GOYA_ENGINE_ID_TPC_1, + GOYA_ENGINE_ID_TPC_2, + GOYA_ENGINE_ID_TPC_3, + GOYA_ENGINE_ID_TPC_4, + GOYA_ENGINE_ID_TPC_5, + GOYA_ENGINE_ID_TPC_6, + GOYA_ENGINE_ID_TPC_7, + GOYA_ENGINE_ID_SIZE +}; + +enum gaudi_engine_id { + GAUDI_ENGINE_ID_DMA_0 = 0, + GAUDI_ENGINE_ID_DMA_1, + GAUDI_ENGINE_ID_DMA_2, + GAUDI_ENGINE_ID_DMA_3, + GAUDI_ENGINE_ID_DMA_4, + GAUDI_ENGINE_ID_DMA_5, + GAUDI_ENGINE_ID_DMA_6, + GAUDI_ENGINE_ID_DMA_7, + GAUDI_ENGINE_ID_MME_0, + GAUDI_ENGINE_ID_MME_1, + GAUDI_ENGINE_ID_MME_2, + GAUDI_ENGINE_ID_MME_3, + GAUDI_ENGINE_ID_TPC_0, + GAUDI_ENGINE_ID_TPC_1, + GAUDI_ENGINE_ID_TPC_2, + GAUDI_ENGINE_ID_TPC_3, + GAUDI_ENGINE_ID_TPC_4, + GAUDI_ENGINE_ID_TPC_5, + GAUDI_ENGINE_ID_TPC_6, + GAUDI_ENGINE_ID_TPC_7, + GAUDI_ENGINE_ID_NIC_0, + GAUDI_ENGINE_ID_NIC_1, + GAUDI_ENGINE_ID_NIC_2, + GAUDI_ENGINE_ID_NIC_3, + GAUDI_ENGINE_ID_NIC_4, + GAUDI_ENGINE_ID_NIC_5, + GAUDI_ENGINE_ID_NIC_6, + GAUDI_ENGINE_ID_NIC_7, + GAUDI_ENGINE_ID_NIC_8, + GAUDI_ENGINE_ID_NIC_9, + GAUDI_ENGINE_ID_SIZE +}; + +enum hl_device_status { + HL_DEVICE_STATUS_OPERATIONAL, + HL_DEVICE_STATUS_IN_RESET, + HL_DEVICE_STATUS_MALFUNCTION +}; + +/* Opcode for management ioctl + * + * HW_IP_INFO - Receive information about different IP blocks in the + * device. + * HL_INFO_HW_EVENTS - Receive an array describing how many times each event + * occurred since the last hard reset. + * HL_INFO_DRAM_USAGE - Retrieve the dram usage inside the device and of the + * specific context. This is relevant only for devices + * where the dram is managed by the kernel driver + * HL_INFO_HW_IDLE - Retrieve information about the idle status of each + * internal engine. + * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't + * require an open context. + * HL_INFO_DEVICE_UTILIZATION - Retrieve the total utilization of the device + * over the last period specified by the user. + * The period can be between 100ms to 1s, in + * resolution of 100ms. The return value is a + * percentage of the utilization rate. + * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each + * event occurred since the driver was loaded. + * HL_INFO_CLK_RATE - Retrieve the current and maximum clock rate + * of the device in MHz. The maximum clock rate is + * configurable via sysfs parameter + * HL_INFO_RESET_COUNT - Retrieve the counts of the soft and hard reset + * operations performed on the device since the last + * time the driver was loaded. + * HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time + * for synchronization. + * HL_INFO_CS_COUNTERS - Retrieve command submission counters + * HL_INFO_PCI_COUNTERS - Retrieve PCI counters + * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason + * HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore + * HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption + */ +#define HL_INFO_HW_IP_INFO 0 +#define HL_INFO_HW_EVENTS 1 +#define HL_INFO_DRAM_USAGE 2 +#define HL_INFO_HW_IDLE 3 +#define HL_INFO_DEVICE_STATUS 4 +#define HL_INFO_DEVICE_UTILIZATION 6 +#define HL_INFO_HW_EVENTS_AGGREGATE 7 +#define HL_INFO_CLK_RATE 8 +#define HL_INFO_RESET_COUNT 9 +#define HL_INFO_TIME_SYNC 10 +#define HL_INFO_CS_COUNTERS 11 +#define HL_INFO_PCI_COUNTERS 12 +#define HL_INFO_CLK_THROTTLE_REASON 13 +#define HL_INFO_SYNC_MANAGER 14 +#define HL_INFO_TOTAL_ENERGY 15 + +#define HL_INFO_VERSION_MAX_LEN 128 +#define HL_INFO_CARD_NAME_MAX_LEN 16 + +struct hl_info_hw_ip_info { + __u64 sram_base_address; + __u64 dram_base_address; + __u64 dram_size; + __u32 sram_size; + __u32 num_of_events; + __u32 device_id; /* PCI Device ID */ + __u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */ + __u32 reserved[2]; + __u32 cpld_version; + __u32 psoc_pci_pll_nr; + __u32 psoc_pci_pll_nf; + __u32 psoc_pci_pll_od; + __u32 psoc_pci_pll_div_factor; + __u8 tpc_enabled_mask; + __u8 dram_enabled; + __u8 pad[2]; + __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; + __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; +}; + +struct hl_info_dram_usage { + __u64 dram_free_mem; + __u64 ctx_dram_mem; +}; + +struct hl_info_hw_idle { + __u32 is_idle; + /* + * Bitmask of busy engines. + * Bits definition is according to `enum _enging_id'. + */ + __u32 busy_engines_mask; + + /* + * Extended Bitmask of busy engines. + * Bits definition is according to `enum _enging_id'. + */ + __u64 busy_engines_mask_ext; +}; + +struct hl_info_device_status { + __u32 status; + __u32 pad; +}; + +struct hl_info_device_utilization { + __u32 utilization; + __u32 pad; +}; + +struct hl_info_clk_rate { + __u32 cur_clk_rate_mhz; + __u32 max_clk_rate_mhz; +}; + +struct hl_info_reset_count { + __u32 hard_reset_cnt; + __u32 soft_reset_cnt; +}; + +struct hl_info_time_sync { + __u64 device_time; + __u64 host_time; +}; + +/** + * struct hl_info_pci_counters - pci counters + * @rx_throughput: PCI rx throughput KBps + * @tx_throughput: PCI tx throughput KBps + * @replay_cnt: PCI replay counter + */ +struct hl_info_pci_counters { + __u64 rx_throughput; + __u64 tx_throughput; + __u64 replay_cnt; +}; + +#define HL_CLK_THROTTLE_POWER 0x1 +#define HL_CLK_THROTTLE_THERMAL 0x2 + +/** + * struct hl_info_clk_throttle - clock throttling reason + * @clk_throttling_reason: each bit represents a clk throttling reason + */ +struct hl_info_clk_throttle { + __u32 clk_throttling_reason; +}; + +/** + * struct hl_info_energy - device energy information + * @total_energy_consumption: total device energy consumption + */ +struct hl_info_energy { + __u64 total_energy_consumption; +}; + +/** + * struct hl_info_sync_manager - sync manager information + * @first_available_sync_object: first available sob + * @first_available_monitor: first available monitor + */ +struct hl_info_sync_manager { + __u32 first_available_sync_object; + __u32 first_available_monitor; +}; + +/** + * struct hl_info_cs_counters - command submission counters + * @out_of_mem_drop_cnt: dropped due to memory allocation issue + * @parsing_drop_cnt: dropped due to error in packet parsing + * @queue_full_drop_cnt: dropped due to queue full + * @device_in_reset_drop_cnt: dropped due to device in reset + * @max_cs_in_flight_drop_cnt: dropped due to maximum CS in-flight + */ +struct hl_cs_counters { + __u64 out_of_mem_drop_cnt; + __u64 parsing_drop_cnt; + __u64 queue_full_drop_cnt; + __u64 device_in_reset_drop_cnt; + __u64 max_cs_in_flight_drop_cnt; +}; + +struct hl_info_cs_counters { + struct hl_cs_counters cs_counters; + struct hl_cs_counters ctx_cs_counters; +}; + +enum gaudi_dcores { + HL_GAUDI_WS_DCORE, + HL_GAUDI_WN_DCORE, + HL_GAUDI_EN_DCORE, + HL_GAUDI_ES_DCORE +}; + +struct hl_info_args { + /* Location of relevant struct in userspace */ + __u64 return_pointer; + /* + * The size of the return value. Just like "size" in "snprintf", + * it limits how many bytes the kernel can write + * + * For hw_events array, the size should be + * hl_info_hw_ip_info.num_of_events * sizeof(__u32) + */ + __u32 return_size; + + /* HL_INFO_* */ + __u32 op; + + union { + /* Dcore id for which the information is relevant. + * For Gaudi refer to 'enum gaudi_dcores' + */ + __u32 dcore_id; + /* Context ID - Currently not in use */ + __u32 ctx_id; + /* Period value for utilization rate (100ms - 1000ms, in 100ms + * resolution. + */ + __u32 period_ms; + }; + + __u32 pad; +}; + +/* Opcode to create a new command buffer */ +#define HL_CB_OP_CREATE 0 +/* Opcode to destroy previously created command buffer */ +#define HL_CB_OP_DESTROY 1 + +/* 2MB minus 32 bytes for 2xMSG_PROT */ +#define HL_MAX_CB_SIZE (0x200000 - 32) + +/* Indicates whether the command buffer should be mapped to the device's MMU */ +#define HL_CB_FLAGS_MAP 0x1 + +struct hl_cb_in { + /* Handle of CB or 0 if we want to create one */ + __u64 cb_handle; + /* HL_CB_OP_* */ + __u32 op; + /* Size of CB. Maximum size is HL_MAX_CB_SIZE. The minimum size that + * will be allocated, regardless of this parameter's value, is PAGE_SIZE + */ + __u32 cb_size; + /* Context ID - Currently not in use */ + __u32 ctx_id; + /* HL_CB_FLAGS_* */ + __u32 flags; +}; + +struct hl_cb_out { + /* Handle of CB */ + __u64 cb_handle; +}; + +union hl_cb_args { + struct hl_cb_in in; + struct hl_cb_out out; +}; + +/* + * This structure size must always be fixed to 64-bytes for backward + * compatibility + */ +struct hl_cs_chunk { + union { + /* For external queue, this represents a Handle of CB on the + * Host. + * For internal queue in Goya, this represents an SRAM or + * a DRAM address of the internal CB. In Gaudi, this might also + * represent a mapped host address of the CB. + * + * A mapped host address is in the device address space, after + * a host address was mapped by the device MMU. + */ + __u64 cb_handle; + + /* Relevant only when HL_CS_FLAGS_WAIT is set. + * This holds address of array of u64 values that contain + * signal CS sequence numbers. The wait described by this job + * will listen on all those signals (wait event per signal) + */ + __u64 signal_seq_arr; + }; + + /* Index of queue to put the CB on */ + __u32 queue_index; + + union { + /* + * Size of command buffer with valid packets + * Can be smaller then actual CB size + */ + __u32 cb_size; + + /* Relevant only when HL_CS_FLAGS_WAIT is set. + * Number of entries in signal_seq_arr + */ + __u32 num_signal_seq_arr; + }; + + /* HL_CS_CHUNK_FLAGS_* */ + __u32 cs_chunk_flags; + + /* Align structure to 64 bytes */ + __u32 pad[11]; +}; + +/* SIGNAL and WAIT flags are mutually exclusive */ +#define HL_CS_FLAGS_FORCE_RESTORE 0x1 +#define HL_CS_FLAGS_SIGNAL 0x2 +#define HL_CS_FLAGS_WAIT 0x4 + +#define HL_CS_STATUS_SUCCESS 0 + +#define HL_MAX_JOBS_PER_CS 512 + +struct hl_cs_in { + + /* this holds address of array of hl_cs_chunk for restore phase */ + __u64 chunks_restore; + + /* holds address of array of hl_cs_chunk for execution phase */ + __u64 chunks_execute; + + /* this holds address of array of hl_cs_chunk for store phase - + * Currently not in use + */ + __u64 chunks_store; + + /* Number of chunks in restore phase array. Maximum number is + * HL_MAX_JOBS_PER_CS + */ + __u32 num_chunks_restore; + + /* Number of chunks in execution array. Maximum number is + * HL_MAX_JOBS_PER_CS + */ + __u32 num_chunks_execute; + + /* Number of chunks in restore phase array - Currently not in use */ + __u32 num_chunks_store; + + /* HL_CS_FLAGS_* */ + __u32 cs_flags; + + /* Context ID - Currently not in use */ + __u32 ctx_id; +}; + +struct hl_cs_out { + /* + * seq holds the sequence number of the CS to pass to wait ioctl. All + * values are valid except for 0 and ULLONG_MAX + */ + __u64 seq; + /* HL_CS_STATUS_* */ + __u32 status; + __u32 pad; +}; + +union hl_cs_args { + struct hl_cs_in in; + struct hl_cs_out out; +}; + +struct hl_wait_cs_in { + /* Command submission sequence number */ + __u64 seq; + /* Absolute timeout to wait in microseconds */ + __u64 timeout_us; + /* Context ID - Currently not in use */ + __u32 ctx_id; + __u32 pad; +}; + +#define HL_WAIT_CS_STATUS_COMPLETED 0 +#define HL_WAIT_CS_STATUS_BUSY 1 +#define HL_WAIT_CS_STATUS_TIMEDOUT 2 +#define HL_WAIT_CS_STATUS_ABORTED 3 +#define HL_WAIT_CS_STATUS_INTERRUPTED 4 + +struct hl_wait_cs_out { + /* HL_WAIT_CS_STATUS_* */ + __u32 status; + __u32 pad; +}; + +union hl_wait_cs_args { + struct hl_wait_cs_in in; + struct hl_wait_cs_out out; +}; + +/* Opcode to allocate device memory */ +#define HL_MEM_OP_ALLOC 0 +/* Opcode to free previously allocated device memory */ +#define HL_MEM_OP_FREE 1 +/* Opcode to map host and device memory */ +#define HL_MEM_OP_MAP 2 +/* Opcode to unmap previously mapped host and device memory */ +#define HL_MEM_OP_UNMAP 3 + +/* Memory flags */ +#define HL_MEM_CONTIGUOUS 0x1 +#define HL_MEM_SHARED 0x2 +#define HL_MEM_USERPTR 0x4 + +struct hl_mem_in { + union { + /* HL_MEM_OP_ALLOC- allocate device memory */ + struct { + /* Size to alloc */ + __u64 mem_size; + } alloc; + + /* HL_MEM_OP_FREE - free device memory */ + struct { + /* Handle returned from HL_MEM_OP_ALLOC */ + __u64 handle; + } free; + + /* HL_MEM_OP_MAP - map device memory */ + struct { + /* + * Requested virtual address of mapped memory. + * The driver will try to map the requested region to + * this hint address, as long as the address is valid + * and not already mapped. The user should check the + * returned address of the IOCTL to make sure he got + * the hint address. Passing 0 here means that the + * driver will choose the address itself. + */ + __u64 hint_addr; + /* Handle returned from HL_MEM_OP_ALLOC */ + __u64 handle; + } map_device; + + /* HL_MEM_OP_MAP - map host memory */ + struct { + /* Address of allocated host memory */ + __u64 host_virt_addr; + /* + * Requested virtual address of mapped memory. + * The driver will try to map the requested region to + * this hint address, as long as the address is valid + * and not already mapped. The user should check the + * returned address of the IOCTL to make sure he got + * the hint address. Passing 0 here means that the + * driver will choose the address itself. + */ + __u64 hint_addr; + /* Size of allocated host memory */ + __u64 mem_size; + } map_host; + + /* HL_MEM_OP_UNMAP - unmap host memory */ + struct { + /* Virtual address returned from HL_MEM_OP_MAP */ + __u64 device_virt_addr; + } unmap; + }; + + /* HL_MEM_OP_* */ + __u32 op; + /* HL_MEM_* flags */ + __u32 flags; + /* Context ID - Currently not in use */ + __u32 ctx_id; + __u32 pad; +}; + +struct hl_mem_out { + union { + /* + * Used for HL_MEM_OP_MAP as the virtual address that was + * assigned in the device VA space. + * A value of 0 means the requested operation failed. + */ + __u64 device_virt_addr; + + /* + * Used for HL_MEM_OP_ALLOC. This is the assigned + * handle for the allocated memory + */ + __u64 handle; + }; +}; + +union hl_mem_args { + struct hl_mem_in in; + struct hl_mem_out out; +}; + +#define HL_DEBUG_MAX_AUX_VALUES 10 + +struct hl_debug_params_etr { + /* Address in memory to allocate buffer */ + __u64 buffer_address; + + /* Size of buffer to allocate */ + __u64 buffer_size; + + /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ + __u32 sink_mode; + __u32 pad; +}; + +struct hl_debug_params_etf { + /* Address in memory to allocate buffer */ + __u64 buffer_address; + + /* Size of buffer to allocate */ + __u64 buffer_size; + + /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ + __u32 sink_mode; + __u32 pad; +}; + +struct hl_debug_params_stm { + /* Two bit masks for HW event and Stimulus Port */ + __u64 he_mask; + __u64 sp_mask; + + /* Trace source ID */ + __u32 id; + + /* Frequency for the timestamp register */ + __u32 frequency; +}; + +struct hl_debug_params_bmon { + /* Two address ranges that the user can request to filter */ + __u64 start_addr0; + __u64 addr_mask0; + + __u64 start_addr1; + __u64 addr_mask1; + + /* Capture window configuration */ + __u32 bw_win; + __u32 win_capture; + + /* Trace source ID */ + __u32 id; + __u32 pad; +}; + +struct hl_debug_params_spmu { + /* Event types selection */ + __u64 event_types[HL_DEBUG_MAX_AUX_VALUES]; + + /* Number of event types selection */ + __u32 event_types_num; + __u32 pad; +}; + +/* Opcode for ETR component */ +#define HL_DEBUG_OP_ETR 0 +/* Opcode for ETF component */ +#define HL_DEBUG_OP_ETF 1 +/* Opcode for STM component */ +#define HL_DEBUG_OP_STM 2 +/* Opcode for FUNNEL component */ +#define HL_DEBUG_OP_FUNNEL 3 +/* Opcode for BMON component */ +#define HL_DEBUG_OP_BMON 4 +/* Opcode for SPMU component */ +#define HL_DEBUG_OP_SPMU 5 +/* Opcode for timestamp (deprecated) */ +#define HL_DEBUG_OP_TIMESTAMP 6 +/* Opcode for setting the device into or out of debug mode. The enable + * variable should be 1 for enabling debug mode and 0 for disabling it + */ +#define HL_DEBUG_OP_SET_MODE 7 + +struct hl_debug_args { + /* + * Pointer to user input structure. + * This field is relevant to specific opcodes. + */ + __u64 input_ptr; + /* Pointer to user output structure */ + __u64 output_ptr; + /* Size of user input structure */ + __u32 input_size; + /* Size of user output structure */ + __u32 output_size; + /* HL_DEBUG_OP_* */ + __u32 op; + /* + * Register index in the component, taken from the debug_regs_index enum + * in the various ASIC header files + */ + __u32 reg_idx; + /* Enable/disable */ + __u32 enable; + /* Context ID - Currently not in use */ + __u32 ctx_id; +}; + +/* + * Various information operations such as: + * - H/W IP information + * - Current dram usage + * + * The user calls this IOCTL with an opcode that describes the required + * information. The user should supply a pointer to a user-allocated memory + * chunk, which will be filled by the driver with the requested information. + * + * The user supplies the maximum amount of size to copy into the user's memory, + * in order to prevent data corruption in case of differences between the + * definitions of structures in kernel and userspace, e.g. in case of old + * userspace and new kernel driver + */ +#define HL_IOCTL_INFO \ + _IOWR('H', 0x01, struct hl_info_args) + +/* + * Command Buffer + * - Request a Command Buffer + * - Destroy a Command Buffer + * + * The command buffers are memory blocks that reside in DMA-able address + * space and are physically contiguous so they can be accessed by the device + * directly. They are allocated using the coherent DMA API. + * + * When creating a new CB, the IOCTL returns a handle of it, and the user-space + * process needs to use that handle to mmap the buffer so it can access them. + * + * In some instances, the device must access the command buffer through the + * device's MMU, and thus its memory should be mapped. In these cases, user can + * indicate the driver that such a mapping is required. + * The resulting device virtual address will be used internally by the driver, + * and won't be returned to user. + * + */ +#define HL_IOCTL_CB \ + _IOWR('H', 0x02, union hl_cb_args) + +/* + * Command Submission + * + * To submit work to the device, the user need to call this IOCTL with a set + * of JOBS. That set of JOBS constitutes a CS object. + * Each JOB will be enqueued on a specific queue, according to the user's input. + * There can be more then one JOB per queue. + * + * The CS IOCTL will receive three sets of JOBS. One set is for "restore" phase, + * a second set is for "execution" phase and a third set is for "store" phase. + * The JOBS on the "restore" phase are enqueued only after context-switch + * (or if its the first CS for this context). The user can also order the + * driver to run the "restore" phase explicitly + * + * There are two types of queues - external and internal. External queues + * are DMA queues which transfer data from/to the Host. All other queues are + * internal. The driver will get completion notifications from the device only + * on JOBS which are enqueued in the external queues. + * + * For jobs on external queues, the user needs to create command buffers + * through the CB ioctl and give the CB's handle to the CS ioctl. For jobs on + * internal queues, the user needs to prepare a "command buffer" with packets + * on either the device SRAM/DRAM or the host, and give the device address of + * that buffer to the CS ioctl. + * + * This IOCTL is asynchronous in regard to the actual execution of the CS. This + * means it returns immediately after ALL the JOBS were enqueued on their + * relevant queues. Therefore, the user mustn't assume the CS has been completed + * or has even started to execute. + * + * Upon successful enqueue, the IOCTL returns a sequence number which the user + * can use with the "Wait for CS" IOCTL to check whether the handle's CS + * external JOBS have been completed. Note that if the CS has internal JOBS + * which can execute AFTER the external JOBS have finished, the driver might + * report that the CS has finished executing BEFORE the internal JOBS have + * actually finished executing. + * + * Even though the sequence number increments per CS, the user can NOT + * automatically assume that if CS with sequence number N finished, then CS + * with sequence number N-1 also finished. The user can make this assumption if + * and only if CS N and CS N-1 are exactly the same (same CBs for the same + * queues). + */ +#define HL_IOCTL_CS \ + _IOWR('H', 0x03, union hl_cs_args) + +/* + * Wait for Command Submission + * + * The user can call this IOCTL with a handle it received from the CS IOCTL + * to wait until the handle's CS has finished executing. The user will wait + * inside the kernel until the CS has finished or until the user-requested + * timeout has expired. + * + * If the timeout value is 0, the driver won't sleep at all. It will check + * the status of the CS and return immediately + * + * The return value of the IOCTL is a standard Linux error code. The possible + * values are: + * + * EINTR - Kernel waiting has been interrupted, e.g. due to OS signal + * that the user process received + * ETIMEDOUT - The CS has caused a timeout on the device + * EIO - The CS was aborted (usually because the device was reset) + * ENODEV - The device wants to do hard-reset (so user need to close FD) + * + * The driver also returns a custom define inside the IOCTL which can be: + * + * HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0) + * HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0) + * HL_WAIT_CS_STATUS_TIMEDOUT - The CS has caused a timeout on the device + * (ETIMEDOUT) + * HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the + * device was reset (EIO) + * HL_WAIT_CS_STATUS_INTERRUPTED - Waiting for the CS was interrupted (EINTR) + * + */ + +#define HL_IOCTL_WAIT_CS \ + _IOWR('H', 0x04, union hl_wait_cs_args) + +/* + * Memory + * - Map host memory to device MMU + * - Unmap host memory from device MMU + * + * This IOCTL allows the user to map host memory to the device MMU + * + * For host memory, the IOCTL doesn't allocate memory. The user is supposed + * to allocate the memory in user-space (malloc/new). The driver pins the + * physical pages (up to the allowed limit by the OS), assigns a virtual + * address in the device VA space and initializes the device MMU. + * + * There is an option for the user to specify the requested virtual address. + * + */ +#define HL_IOCTL_MEMORY \ + _IOWR('H', 0x05, union hl_mem_args) + +/* + * Debug + * - Enable/disable the ETR/ETF/FUNNEL/STM/BMON/SPMU debug traces + * + * This IOCTL allows the user to get debug traces from the chip. + * + * Before the user can send configuration requests of the various + * debug/profile engines, it needs to set the device into debug mode. + * This is because the debug/profile infrastructure is shared component in the + * device and we can't allow multiple users to access it at the same time. + * + * Once a user set the device into debug mode, the driver won't allow other + * users to "work" with the device, i.e. open a FD. If there are multiple users + * opened on the device, the driver won't allow any user to debug the device. + * + * For each configuration request, the user needs to provide the register index + * and essential data such as buffer address and size. + * + * Once the user has finished using the debug/profile engines, he should + * set the device into non-debug mode, i.e. disable debug mode. + * + * The driver can decide to "kick out" the user if he abuses this interface. + * + */ +#define HL_IOCTL_DEBUG \ + _IOWR('H', 0x06, struct hl_debug_args) + +#define HL_COMMAND_START 0x01 +#define HL_COMMAND_END 0x07 + +#endif /* HABANALABS_H_ */ -- cgit v1.2.3