/* * BSD LICENSE * * Copyright(c) 2016 Broadcom. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Broadcom Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /dts-v1/; #include "bcm-nsp.dtsi" #include / { model = "NorthStar Plus SVK (BCM958522ER)"; compatible = "brcm,bcm58522", "brcm,nsp"; chosen { stdout-path = "serial0:115200n8"; }; memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; open-source; priority = <200>; }; }; /* USB 3 support needed to be complete */ &dma { status = "okay"; }; &amac0 { status = "okay"; }; &amac1 { status = "okay"; }; &ehci0 { status = "okay"; }; &nand_controller { nand@0 { compatible = "brcm,nandcs"; reg = <0>; nand-on-flash-bbt; #address-cells = <1>; #size-cells = <1>; nand-ecc-strength = <24>; nand-ecc-step-size = <1024>; brcm,nand-oob-sector-size = <27>; partition@0 { label = "nboot"; reg = <0x00000000 0x00200000>; read-only; }; partition@200000 { label = "nenv"; reg = <0x00200000 0x00400000>; }; partition@600000 { label = "nsystem"; reg = <0x00600000 0x00a00000>; }; partition@1000000 { label = "nrootfs"; reg = <0x01000000 0x03000000>; }; partition@4000000 { label = "ncustfs"; reg = <0x04000000 0x3c000000>; }; }; }; &ohci0 { status = "okay"; }; &pcie0 { status = "okay"; }; &pcie1 { status = "okay"; }; &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&nand_sel>; nand_sel: nand_sel { function = "nand"; groups = "nand_grp"; }; }; &qspi { bspi-sel = <0>; flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; reg = <0x0>; spi-max-frequency = <12500000>; m25p,fast-read; spi-cpol; spi-cpha; partition@0 { label = "boot"; reg = <0x00000000 0x000a0000>; }; partition@a0000 { label = "env"; reg = <0x000a0000 0x00060000>; }; partition@100000 { label = "system"; reg = <0x00100000 0x00600000>; }; partition@700000 { label = "rootfs"; reg = <0x00700000 0x01900000>; }; }; }; &uart0 { status = "okay"; }; &usb3_phy { status = "okay"; }; &xhci { status = "okay"; };