// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (C) STMicroelectronics 2017 - All Rights Reserved * Author: Alexandre Torgue for STMicroelectronics. */ #include #include / { soc { pinctrl: pin-controller { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; interrupt-parent = <&exti>; st,syscfg = <&syscfg 0x8>; pins-are-numbered; gpioa: gpio@40020000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; gpiob: gpio@40020400 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; gpioc: gpio@40020800 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; gpiod: gpio@40020c00 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0xc00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; gpioe: gpio@40021000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; gpiof: gpio@40021400 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; gpiog: gpio@40021800 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; gpioh: gpio@40021c00 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x1c00 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; gpioi: gpio@40022000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2000 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; gpioj: gpio@40022400 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2400 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; gpiok: gpio@40022800 { gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; reg = <0x2800 0x400>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; cec_pins_a: cec-0 { pins { pinmux = ; /* HDMI CEC */ slew-rate = <0>; drive-open-drain; bias-disable; }; }; usart1_pins_a: usart1-0 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { pinmux = ; /* USART1_RX */ bias-disable; }; }; usart1_pins_b: usart1-1 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { pinmux = ; /* USART1_RX */ bias-disable; }; }; i2c1_pins_b: i2c1-0 { pins { pinmux = , /* I2C1 SDA */ ; /* I2C1 SCL */ bias-disable; drive-open-drain; slew-rate = <0>; }; }; usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = , /* OTG_HS_ULPI_NXT */ , /* OTG_HS_ULPI_DIR */ , /* OTG_HS_ULPI_STP */ , /* OTG_HS_ULPI_CK */ , /* OTG_HS_ULPI_D0 */ , /* OTG_HS_ULPI_D1 */ , /* OTG_HS_ULPI_D2 */ , /* OTG_HS_ULPI_D3 */ , /* OTG_HS_ULPI_D4 */ , /* OTG_HS_ULPI_D5 */ , /* OTG_HS_ULPI_D6 */ ; /* OTG_HS_ULPI_D7 */ bias-disable; drive-push-pull; slew-rate = <2>; }; }; usbotg_hs_pins_b: usbotg-hs-1 { pins { pinmux = , /* OTG_HS_ULPI_NXT */ , /* OTG_HS_ULPI_DIR */ , /* OTG_HS_ULPI_STP */ , /* OTG_HS_ULPI_CK */ , /* OTG_HS_ULPI_D0 */ , /* OTG_HS_ULPI_D1 */ , /* OTG_HS_ULPI_D2 */ , /* OTG_HS_ULPI_D3 */ , /* OTG_HS_ULPI_D4 */ , /* OTG_HS_ULPI_D5 */ , /* OTG_HS_ULPI_D6 */ ; /* OTG_HS_ULPI_D7 */ bias-disable; drive-push-pull; slew-rate = <2>; }; }; usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = , /* OTG_FS_ID */ , /* OTG_FS_DM */ ; /* OTG_FS_DP */ bias-disable; drive-push-pull; slew-rate = <2>; }; }; sdio_pins_a: sdio-pins-a-0 { pins { pinmux = , /* SDMMC1 D0 */ , /* SDMMC1 D1 */ , /* SDMMC1 D2 */ , /* SDMMC1 D3 */ , /* SDMMC1 CLK */ ; /* SDMMC1 CMD */ drive-push-pull; slew-rate = <2>; }; }; sdio_pins_od_a: sdio-pins-od-a-0 { pins1 { pinmux = , /* SDMMC1 D0 */ , /* SDMMC1 D1 */ , /* SDMMC1 D2 */ , /* SDMMC1 D3 */ ; /* SDMMC1 CLK */ drive-push-pull; slew-rate = <2>; }; pins2 { pinmux = ; /* SDMMC1 CMD */ drive-open-drain; slew-rate = <2>; }; }; sdio_pins_b: sdio-pins-b-0 { pins { pinmux = , /* SDMMC2 D0 */ , /* SDMMC2 D1 */ , /* SDMMC2 D2 */ , /* SDMMC2 D3 */ , /* SDMMC2 CLK */ ; /* SDMMC2 CMD */ drive-push-pull; slew-rate = <2>; }; }; sdio_pins_od_b: sdio-pins-od-b-0 { pins1 { pinmux = , /* SDMMC2 D0 */ , /* SDMMC2 D1 */ , /* SDMMC2 D2 */ , /* SDMMC2 D3 */ ; /* SDMMC2 CLK */ drive-push-pull; slew-rate = <2>; }; pins2 { pinmux = ; /* SDMMC2 CMD */ drive-open-drain; slew-rate = <2>; }; }; can1_pins_a: can1-0 { pins1 { pinmux = ; /* CAN1_TX */ }; pins2 { pinmux = ; /* CAN1_RX */ bias-pull-up; }; }; can1_pins_b: can1-1 { pins1 { pinmux = ; /* CAN1_TX */ }; pins2 { pinmux = ; /* CAN1_RX */ bias-pull-up; }; }; can1_pins_c: can1-2 { pins1 { pinmux = ; /* CAN1_TX */ }; pins2 { pinmux = ; /* CAN1_RX */ bias-pull-up; }; }; can1_pins_d: can1-3 { pins1 { pinmux = ; /* CAN1_TX */ }; pins2 { pinmux = ; /* CAN1_RX */ bias-pull-up; }; }; can2_pins_a: can2-0 { pins1 { pinmux = ; /* CAN2_TX */ }; pins2 { pinmux = ; /* CAN2_RX */ bias-pull-up; }; }; can2_pins_b: can2-1 { pins1 { pinmux = ; /* CAN2_TX */ }; pins2 { pinmux = ; /* CAN2_RX */ bias-pull-up; }; }; can3_pins_a: can3-0 { pins1 { pinmux = ; /* CAN3_TX */ }; pins2 { pinmux = ; /* CAN3_RX */ bias-pull-up; }; }; can3_pins_b: can3-1 { pins1 { pinmux = ; /* CAN3_TX */ }; pins2 { pinmux = ; /* CAN3_RX */ bias-pull-up; }; }; }; }; };