// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015, The Linux Foundation. All rights reserved. * Copyright (c) 2019, 2020, Linaro Ltd. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "tsens.h" /** * struct tsens_irq_data - IRQ status and temperature violations * @up_viol: upper threshold violated * @up_thresh: upper threshold temperature value * @up_irq_mask: mask register for upper threshold irqs * @up_irq_clear: clear register for uppper threshold irqs * @low_viol: lower threshold violated * @low_thresh: lower threshold temperature value * @low_irq_mask: mask register for lower threshold irqs * @low_irq_clear: clear register for lower threshold irqs * @crit_viol: critical threshold violated * @crit_thresh: critical threshold temperature value * @crit_irq_mask: mask register for critical threshold irqs * @crit_irq_clear: clear register for critical threshold irqs * * Structure containing data about temperature threshold settings and * irq status if they were violated. */ struct tsens_irq_data { u32 up_viol; int up_thresh; u32 up_irq_mask; u32 up_irq_clear; u32 low_viol; int low_thresh; u32 low_irq_mask; u32 low_irq_clear; u32 crit_viol; u32 crit_thresh; u32 crit_irq_mask; u32 crit_irq_clear; }; char *qfprom_read(struct device *dev, const char *cname) { struct nvmem_cell *cell; ssize_t data; char *ret; cell = nvmem_cell_get(dev, cname); if (IS_ERR(cell)) return ERR_CAST(cell); ret = nvmem_cell_read(cell, &data); nvmem_cell_put(cell); return ret; } /* * Use this function on devices where slope and offset calculations * depend on calibration data read from qfprom. On others the slope * and offset values are derived from tz->tzp->slope and tz->tzp->offset * resp. */ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, u32 *p2, u32 mode) { int i; int num, den; for (i = 0; i < priv->num_sensors; i++) { dev_dbg(priv->dev, "%s: sensor%d - data_point1:%#x data_point2:%#x\n", __func__, i, p1[i], p2[i]); priv->sensor[i].slope = SLOPE_DEFAULT; if (mode == TWO_PT_CALIB) { /* * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ * temp_120_degc - temp_30_degc (x2 - x1) */ num = p2[i] - p1[i]; num *= SLOPE_FACTOR; den = CAL_DEGC_PT2 - CAL_DEGC_PT1; priv->sensor[i].slope = num / den; } priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - (CAL_DEGC_PT1 * priv->sensor[i].slope); dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset); } } static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) { u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); } static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) { int degc, num, den; num = (adc_code * SLOPE_FACTOR) - s->offset; den = s->slope; if (num > 0) degc = num + (den / 2); else if (num < 0) degc = num - (den / 2); else degc = num; degc /= den; return degc; } /** * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. * @s: Pointer to sensor struct * @field: Index into regmap_field array pointing to temperature data * * This function handles temperature returned in ADC code or deciCelsius * depending on IP version. * * Return: Temperature in milliCelsius on success, a negative errno will * be returned in error cases */ static int tsens_hw_to_mC(const struct tsens_sensor *s, int field) { struct tsens_priv *priv = s->priv; u32 resolution; u32 temp = 0; int ret; resolution = priv->fields[LAST_TEMP_0].msb - priv->fields[LAST_TEMP_0].lsb; ret = regmap_field_read(priv->rf[field], &temp); if (ret) return ret; /* Convert temperature from ADC code to milliCelsius */ if (priv->feat->adc) return code_to_degc(temp, s) * 1000; /* deciCelsius -> milliCelsius along with sign extension */ return sign_extend32(temp, resolution) * 100; } /** * tsens_mC_to_hw - Convert temperature to hardware register value * @s: Pointer to sensor struct * @temp: temperature in milliCelsius to be programmed to hardware * * This function outputs the value to be written to hardware in ADC code * or deciCelsius depending on IP version. * * Return: ADC code or temperature in deciCelsius. */ static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp) { struct tsens_priv *priv = s->priv; /* milliC to adc code */ if (priv->feat->adc) return degc_to_code(temp / 1000, s); /* milliC to deciC */ return temp / 100; } static inline enum tsens_ver tsens_version(struct tsens_priv *priv) { return priv->feat->ver_major; } static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, enum tsens_irq_type irq_type, bool enable) { u32 index = 0; switch (irq_type) { case UPPER: index = UP_INT_CLEAR_0 + hw_id; break; case LOWER: index = LOW_INT_CLEAR_0 + hw_id; break; case CRITICAL: /* No critical interrupts before v2 */ return; } regmap_field_write(priv->rf[index], enable ? 0 : 1); } static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, enum tsens_irq_type irq_type, bool enable) { u32 index_mask = 0, index_clear = 0; /* * To enable the interrupt flag for a sensor: * - clear the mask bit * To disable the interrupt flag for a sensor: * - Mask further interrupts for this sensor * - Write 1 followed by 0 to clear the interrupt */ switch (irq_type) { case UPPER: index_mask = UP_INT_MASK_0 + hw_id; index_clear = UP_INT_CLEAR_0 + hw_id; break; case LOWER: index_mask = LOW_INT_MASK_0 + hw_id; index_clear = LOW_INT_CLEAR_0 + hw_id; break; case CRITICAL: index_mask = CRIT_INT_MASK_0 + hw_id; index_clear = CRIT_INT_CLEAR_0 + hw_id; break; } if (enable) { regmap_field_write(priv->rf[index_mask], 0); } else { regmap_field_write(priv->rf[index_mask], 1); regmap_field_write(priv->rf[index_clear], 1); regmap_field_write(priv->rf[index_clear], 0); } } /** * tsens_set_interrupt - Set state of an interrupt * @priv: Pointer to tsens controller private data * @hw_id: Hardware ID aka. sensor number * @irq_type: irq_type from enum tsens_irq_type * @enable: false = disable, true = enable * * Call IP-specific function to set state of an interrupt * * Return: void */ static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, enum tsens_irq_type irq_type, bool enable) { dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", enable ? "en" : "dis"); if (tsens_version(priv) > VER_1_X) tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); else tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); } /** * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold * @priv: Pointer to tsens controller private data * @hw_id: Hardware ID aka. sensor number * @d: Pointer to irq state data * * Return: 0 if threshold was not violated, 1 if it was violated and negative * errno in case of errors */ static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, struct tsens_irq_data *d) { int ret; ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); if (ret) return ret; ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); if (ret) return ret; if (priv->feat->crit_int) { ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id], &d->crit_viol); if (ret) return ret; } if (d->up_viol || d->low_viol || d->crit_viol) return 1; return 0; } static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, const struct tsens_sensor *s, struct tsens_irq_data *d) { int ret; ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); if (ret) return ret; ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); if (ret) return ret; if (tsens_version(priv) > VER_1_X) { ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); if (ret) return ret; ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); if (ret) return ret; ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id], &d->crit_irq_clear); if (ret) return ret; ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id], &d->crit_irq_mask); if (ret) return ret; d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id); } else { /* No mask register on older TSENS */ d->up_irq_mask = 0; d->low_irq_mask = 0; d->crit_irq_clear = 0; d->crit_irq_mask = 0; d->crit_thresh = 0; } d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n", hw_id, __func__, (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", d->low_viol, d->up_viol, d->crit_viol, d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear, d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask); dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__, (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", d->low_thresh, d->up_thresh, d->crit_thresh); return 0; } static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) { if (ver > VER_1_X) return mask & (1 << hw_id); /* v1, v0.1 don't have a irq mask register */ return 0; } /** * tsens_critical_irq_thread() - Threaded handler for critical interrupts * @irq: irq number * @data: tsens controller private data * * Check FSM watchdog bark status and clear if needed. * Check all sensors to find ones that violated their critical threshold limits. * Clear and then re-enable the interrupt. * * The level-triggered interrupt might deassert if the temperature returned to * within the threshold limits by the time the handler got scheduled. We * consider the irq to have been handled in that case. * * Return: IRQ_HANDLED */ static irqreturn_t tsens_critical_irq_thread(int irq, void *data) { struct tsens_priv *priv = data; struct tsens_irq_data d; int temp, ret, i; u32 wdog_status, wdog_count; if (priv->feat->has_watchdog) { ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status); if (ret) return ret; if (wdog_status) { /* Clear WDOG interrupt */ regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count); if (ret) return ret; if (wdog_count) dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count); /* Fall through to handle critical interrupts if any */ } } for (i = 0; i < priv->num_sensors; i++) { const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; ret = get_temp_tsens_valid(s, &temp); if (ret) { dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__); continue; } tsens_read_irq_state(priv, hw_id, s, &d); if (d.crit_viol && !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) { /* Mask critical interrupts, unused on Linux */ tsens_set_interrupt(priv, hw_id, CRITICAL, false); } } return IRQ_HANDLED; } /** * tsens_irq_thread - Threaded interrupt handler for uplow interrupts * @irq: irq number * @data: tsens controller private data * * Check all sensors to find ones that violated their threshold limits. If the * temperature is still outside the limits, call thermal_zone_device_update() to * update the thresholds, else re-enable the interrupts. * * The level-triggered interrupt might deassert if the temperature returned to * within the threshold limits by the time the handler got scheduled. We * consider the irq to have been handled in that case. * * Return: IRQ_HANDLED */ static irqreturn_t tsens_irq_thread(int irq, void *data) { struct tsens_priv *priv = data; struct tsens_irq_data d; bool enable = true, disable = false; unsigned long flags; int temp, ret, i; for (i = 0; i < priv->num_sensors; i++) { bool trigger = false; const struct tsens_sensor *s = &priv->sensor[i]; u32 hw_id = s->hw_id; if (!s->tzd) continue; if (!tsens_threshold_violated(priv, hw_id, &d)) continue; ret = get_temp_tsens_valid(s, &temp); if (ret) { dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__); continue; } spin_lock_irqsave(&priv->ul_lock, flags); tsens_read_irq_state(priv, hw_id, s, &d); if (d.up_viol && !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { tsens_set_interrupt(priv, hw_id, UPPER, disable); if (d.up_thresh > temp) { dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", hw_id, __func__); tsens_set_interrupt(priv, hw_id, UPPER, enable); } else { trigger = true; /* Keep irq masked */ } } else if (d.low_viol && !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { tsens_set_interrupt(priv, hw_id, LOWER, disable); if (d.low_thresh < temp) { dev_dbg(priv->dev, "[%u] %s: re-arm low\n", hw_id, __func__); tsens_set_interrupt(priv, hw_id, LOWER, enable); } else { trigger = true; /* Keep irq masked */ } } spin_unlock_irqrestore(&priv->ul_lock, flags); if (trigger) { dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", hw_id, __func__, temp); thermal_zone_device_update(s->tzd, THERMAL_EVENT_UNSPECIFIED); } else { dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", hw_id, __func__, temp); } } return IRQ_HANDLED; } static int tsens_set_trips(void *_sensor, int low, int high) { struct tsens_sensor *s = _sensor; struct tsens_priv *priv = s->priv; struct device *dev = priv->dev; struct tsens_irq_data d; unsigned long flags; int high_val, low_val, cl_high, cl_low; u32 hw_id = s->hw_id; dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", hw_id, __func__, low, high); cl_high = clamp_val(high, -40000, 120000); cl_low = clamp_val(low, -40000, 120000); high_val = tsens_mC_to_hw(s, cl_high); low_val = tsens_mC_to_hw(s, cl_low); spin_lock_irqsave(&priv->ul_lock, flags); tsens_read_irq_state(priv, hw_id, s, &d); /* Write the new thresholds and clear the status */ regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); tsens_set_interrupt(priv, hw_id, LOWER, true); tsens_set_interrupt(priv, hw_id, UPPER, true); spin_unlock_irqrestore(&priv->ul_lock, flags); dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); return 0; } static int tsens_enable_irq(struct tsens_priv *priv) { int ret; int val = tsens_version(priv) > VER_1_X ? 7 : 1; ret = regmap_field_write(priv->rf[INT_EN], val); if (ret < 0) dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__); return ret; } static void tsens_disable_irq(struct tsens_priv *priv) { regmap_field_write(priv->rf[INT_EN], 0); } int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) { struct tsens_priv *priv = s->priv; int hw_id = s->hw_id; u32 temp_idx = LAST_TEMP_0 + hw_id; u32 valid_idx = VALID_0 + hw_id; u32 valid; int ret; ret = regmap_field_read(priv->rf[valid_idx], &valid); if (ret) return ret; while (!valid) { /* Valid bit is 0 for 6 AHB clock cycles. * At 19.2MHz, 1 AHB clock is ~60ns. * We should enter this loop very, very rarely. */ ndelay(400); ret = regmap_field_read(priv->rf[valid_idx], &valid); if (ret) return ret; } /* Valid bit is set, OK to read the temperature */ *temp = tsens_hw_to_mC(s, temp_idx); return 0; } int get_temp_common(const struct tsens_sensor *s, int *temp) { struct tsens_priv *priv = s->priv; int hw_id = s->hw_id; int last_temp = 0, ret; ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); if (ret) return ret; *temp = code_to_degc(last_temp, s) * 1000; return 0; } #ifdef CONFIG_DEBUG_FS static int dbg_sensors_show(struct seq_file *s, void *data) { struct platform_device *pdev = s->private; struct tsens_priv *priv = platform_get_drvdata(pdev); int i; seq_printf(s, "max: %2d\nnum: %2d\n\n", priv->feat->max_sensors, priv->num_sensors); seq_puts(s, " id slope offset\n--------------------------\n"); for (i = 0; i < priv->num_sensors; i++) { seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, priv->sensor[i].slope, priv->sensor[i].offset); } return 0; } static int dbg_version_show(struct seq_file *s, void *data) { struct platform_device *pdev = s->private; struct tsens_priv *priv = platform_get_drvdata(pdev); u32 maj_ver, min_ver, step_ver; int ret; if (tsens_version(priv) > VER_0_1) { ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); if (ret) return ret; ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); if (ret) return ret; ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); if (ret) return ret; seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); } else { seq_puts(s, "0.1.0\n"); } return 0; } DEFINE_SHOW_ATTRIBUTE(dbg_version); DEFINE_SHOW_ATTRIBUTE(dbg_sensors); static void tsens_debug_init(struct platform_device *pdev) { struct tsens_priv *priv = platform_get_drvdata(pdev); struct dentry *root, *file; root = debugfs_lookup("tsens", NULL); if (!root) priv->debug_root = debugfs_create_dir("tsens", NULL); else priv->debug_root = root; file = debugfs_lookup("version", priv->debug_root); if (!file) debugfs_create_file("version", 0444, priv->debug_root, pdev, &dbg_version_fops); /* A directory for each instance of the TSENS IP */ priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); } #else static inline void tsens_debug_init(struct platform_device *pdev) {} #endif static const struct regmap_config tsens_config = { .name = "tm", .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; static const struct regmap_config tsens_srot_config = { .name = "srot", .reg_bits = 32, .val_bits = 32, .reg_stride = 4, }; int __init init_common(struct tsens_priv *priv) { void __iomem *tm_base, *srot_base; struct device *dev = priv->dev; u32 ver_minor; struct resource *res; u32 enabled; int ret, i, j; struct platform_device *op = of_find_device_by_node(priv->dev->of_node); if (!op) return -EINVAL; if (op->num_resources > 1) { /* DT with separate SROT and TM address space */ priv->tm_offset = 0; res = platform_get_resource(op, IORESOURCE_MEM, 1); srot_base = devm_ioremap_resource(dev, res); if (IS_ERR(srot_base)) { ret = PTR_ERR(srot_base); goto err_put_device; } priv->srot_map = devm_regmap_init_mmio(dev, srot_base, &tsens_srot_config); if (IS_ERR(priv->srot_map)) { ret = PTR_ERR(priv->srot_map); goto err_put_device; } } else { /* old DTs where SROT and TM were in a contiguous 2K block */ priv->tm_offset = 0x1000; } res = platform_get_resource(op, IORESOURCE_MEM, 0); tm_base = devm_ioremap_resource(dev, res); if (IS_ERR(tm_base)) { ret = PTR_ERR(tm_base); goto err_put_device; } priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); if (IS_ERR(priv->tm_map)) { ret = PTR_ERR(priv->tm_map); goto err_put_device; } if (tsens_version(priv) > VER_0_1) { for (i = VER_MAJOR; i <= VER_STEP; i++) { priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[i]); if (IS_ERR(priv->rf[i])) { ret = PTR_ERR(priv->rf[i]); goto err_put_device; } } ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); if (ret) goto err_put_device; } priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_EN]); if (IS_ERR(priv->rf[TSENS_EN])) { ret = PTR_ERR(priv->rf[TSENS_EN]); goto err_put_device; } ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); if (ret) goto err_put_device; if (!enabled) { dev_err(dev, "%s: device not enabled\n", __func__); ret = -ENODEV; goto err_put_device; } priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[SENSOR_EN]); if (IS_ERR(priv->rf[SENSOR_EN])) { ret = PTR_ERR(priv->rf[SENSOR_EN]); goto err_put_device; } priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[INT_EN]); if (IS_ERR(priv->rf[INT_EN])) { ret = PTR_ERR(priv->rf[INT_EN]); goto err_put_device; } /* This loop might need changes if enum regfield_ids is reordered */ for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { for (i = 0; i < priv->feat->max_sensors; i++) { int idx = j + i; priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[idx]); if (IS_ERR(priv->rf[idx])) { ret = PTR_ERR(priv->rf[idx]); goto err_put_device; } } } if (priv->feat->crit_int) { /* Loop might need changes if enum regfield_ids is reordered */ for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { for (i = 0; i < priv->feat->max_sensors; i++) { int idx = j + i; priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[idx]); if (IS_ERR(priv->rf[idx])) { ret = PTR_ERR(priv->rf[idx]); goto err_put_device; } } } } if (tsens_version(priv) > VER_1_X && ver_minor > 2) { /* Watchdog is present only on v2.3+ */ priv->feat->has_watchdog = 1; for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[i]); if (IS_ERR(priv->rf[i])) { ret = PTR_ERR(priv->rf[i]); goto err_put_device; } } /* * Watchdog is already enabled, unmask the bark. * Disable cycle completion monitoring */ regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); regmap_field_write(priv->rf[CC_MON_MASK], 1); } spin_lock_init(&priv->ul_lock); tsens_enable_irq(priv); tsens_debug_init(op); err_put_device: put_device(&op->dev); return ret; } static int tsens_get_temp(void *data, int *temp) { struct tsens_sensor *s = data; struct tsens_priv *priv = s->priv; return priv->ops->get_temp(s, temp); } static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend) { struct tsens_sensor *s = data; struct tsens_priv *priv = s->priv; if (priv->ops->get_trend) return priv->ops->get_trend(s, trend); return -ENOTSUPP; } static int __maybe_unused tsens_suspend(struct device *dev) { struct tsens_priv *priv = dev_get_drvdata(dev); if (priv->ops && priv->ops->suspend) return priv->ops->suspend(priv); return 0; } static int __maybe_unused tsens_resume(struct device *dev) { struct tsens_priv *priv = dev_get_drvdata(dev); if (priv->ops && priv->ops->resume) return priv->ops->resume(priv); return 0; } static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); static const struct of_device_id tsens_table[] = { { .compatible = "qcom,msm8916-tsens", .data = &data_8916, }, { .compatible = "qcom,msm8939-tsens", .data = &data_8939, }, { .compatible = "qcom,msm8956-tsens", .data = &data_8956, }, { .compatible = "qcom,msm8960-tsens", .data = &data_8960, }, { .compatible = "qcom,msm8974-tsens", .data = &data_8974, }, { .compatible = "qcom,msm8976-tsens", .data = &data_8976, }, { .compatible = "qcom,msm8996-tsens", .data = &data_8996, }, { .compatible = "qcom,tsens-v1", .data = &data_tsens_v1, }, { .compatible = "qcom,tsens-v2", .data = &data_tsens_v2, }, {} }; MODULE_DEVICE_TABLE(of, tsens_table); static const struct thermal_zone_of_device_ops tsens_of_ops = { .get_temp = tsens_get_temp, .get_trend = tsens_get_trend, .set_trips = tsens_set_trips, }; static int tsens_register_irq(struct tsens_priv *priv, char *irqname, irq_handler_t thread_fn) { struct platform_device *pdev; int ret, irq; pdev = of_find_device_by_node(priv->dev->of_node); if (!pdev) return -ENODEV; irq = platform_get_irq_byname(pdev, irqname); if (irq < 0) { ret = irq; /* For old DTs with no IRQ defined */ if (irq == -ENXIO) ret = 0; } else { ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, thread_fn, IRQF_ONESHOT, dev_name(&pdev->dev), priv); if (ret) dev_err(&pdev->dev, "%s: failed to get irq\n", __func__); else enable_irq_wake(irq); } put_device(&pdev->dev); return ret; } static int tsens_register(struct tsens_priv *priv) { int i, ret; struct thermal_zone_device *tzd; for (i = 0; i < priv->num_sensors; i++) { priv->sensor[i].priv = priv; tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id, &priv->sensor[i], &tsens_of_ops); if (IS_ERR(tzd)) continue; priv->sensor[i].tzd = tzd; if (priv->ops->enable) priv->ops->enable(priv, i); } ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); if (ret < 0) return ret; if (priv->feat->crit_int) ret = tsens_register_irq(priv, "critical", tsens_critical_irq_thread); return ret; } static int tsens_probe(struct platform_device *pdev) { int ret, i; struct device *dev; struct device_node *np; struct tsens_priv *priv; const struct tsens_plat_data *data; const struct of_device_id *id; u32 num_sensors; if (pdev->dev.of_node) dev = &pdev->dev; else dev = pdev->dev.parent; np = dev->of_node; id = of_match_node(tsens_table, np); if (id) data = id->data; else data = &data_8960; num_sensors = data->num_sensors; if (np) of_property_read_u32(np, "#qcom,sensors", &num_sensors); if (num_sensors <= 0) { dev_err(dev, "%s: invalid number of sensors\n", __func__); return -EINVAL; } priv = devm_kzalloc(dev, struct_size(priv, sensor, num_sensors), GFP_KERNEL); if (!priv) return -ENOMEM; priv->dev = dev; priv->num_sensors = num_sensors; priv->ops = data->ops; for (i = 0; i < priv->num_sensors; i++) { if (data->hw_ids) priv->sensor[i].hw_id = data->hw_ids[i]; else priv->sensor[i].hw_id = i; } priv->feat = data->feat; priv->fields = data->fields; platform_set_drvdata(pdev, priv); if (!priv->ops || !priv->ops->init || !priv->ops->get_temp) return -EINVAL; ret = priv->ops->init(priv); if (ret < 0) { dev_err(dev, "%s: init failed\n", __func__); return ret; } if (priv->ops->calibrate) { ret = priv->ops->calibrate(priv); if (ret < 0) { if (ret != -EPROBE_DEFER) dev_err(dev, "%s: calibration failed\n", __func__); return ret; } } return tsens_register(priv); } static int tsens_remove(struct platform_device *pdev) { struct tsens_priv *priv = platform_get_drvdata(pdev); debugfs_remove_recursive(priv->debug_root); tsens_disable_irq(priv); if (priv->ops->disable) priv->ops->disable(priv); return 0; } static struct platform_driver tsens_driver = { .probe = tsens_probe, .remove = tsens_remove, .driver = { .name = "qcom-tsens", .pm = &tsens_pm_ops, .of_match_table = tsens_table, }, }; module_platform_driver(tsens_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); MODULE_ALIAS("platform:qcom-tsens");