// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2012-2014 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut * on behalf of DENX Software Engineering GmbH */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRIVER_NAME "mxs_phy" /* Register Macro */ #define HW_USBPHY_PWD 0x00 #define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 #define HW_USBPHY_CTRL_SET 0x34 #define HW_USBPHY_CTRL_CLR 0x38 #define HW_USBPHY_DEBUG_SET 0x54 #define HW_USBPHY_DEBUG_CLR 0x58 #define HW_USBPHY_IP 0x90 #define HW_USBPHY_IP_SET 0x94 #define HW_USBPHY_IP_CLR 0x98 #define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16) #define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) #define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) /* imx7ulp */ #define HW_USBPHY_PLL_SIC 0xa0 #define HW_USBPHY_PLL_SIC_SET 0xa4 #define HW_USBPHY_PLL_SIC_CLR 0xa8 #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26) #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25) #define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23) #define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22) #define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21) #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20) #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19) #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18) #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) #define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) #define BM_USBPHY_DEBUG_CLKGATE BIT(30) /* imx7ulp */ #define BM_USBPHY_PLL_LOCK BIT(31) #define BM_USBPHY_PLL_REG_ENABLE BIT(21) #define BM_USBPHY_PLL_BYPASS BIT(16) #define BM_USBPHY_PLL_POWER BIT(12) #define BM_USBPHY_PLL_EN_USB_CLKS BIT(6) /* Anatop Registers */ #define ANADIG_ANA_MISC0 0x150 #define ANADIG_ANA_MISC0_SET 0x154 #define ANADIG_ANA_MISC0_CLR 0x158 #define ANADIG_USB1_CHRG_DETECT_SET 0x1b4 #define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8 #define ANADIG_USB2_CHRG_DETECT_SET 0x214 #define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20) #define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19) #define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18) #define ANADIG_USB1_VBUS_DET_STAT 0x1c0 #define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) #define ANADIG_USB1_CHRG_DET_STAT 0x1d0 #define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2) #define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1) #define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0) #define ANADIG_USB2_VBUS_DET_STAT 0x220 #define ANADIG_USB1_LOOPBACK_SET 0x1e4 #define ANADIG_USB1_LOOPBACK_CLR 0x1e8 #define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART BIT(0) #define ANADIG_USB2_LOOPBACK_SET 0x244 #define ANADIG_USB2_LOOPBACK_CLR 0x248 #define ANADIG_USB1_MISC 0x1f0 #define ANADIG_USB2_MISC 0x250 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12) #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11) #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) #define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3) #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2) #define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5) #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2) #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5) #define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29) #define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28) #define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29) #define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28) #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) /* Do disconnection between PHY and controller without vbus */ #define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) /* * The PHY will be in messy if there is a wakeup after putting * bus to suspend (set portsc.suspendM) but before setting PHY to low * power mode (set portsc.phcd). */ #define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) /* * The SOF sends too fast after resuming, it will cause disconnection * between host and high speed device. */ #define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) /* * IC has bug fixes logic, they include * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST * which are described at above flags, the RTL will handle it * according to different versions. */ #define MXS_PHY_NEED_IP_FIX BIT(3) /* Minimum and maximum values for device tree entries */ #define MXS_PHY_TX_CAL45_MIN 30 #define MXS_PHY_TX_CAL45_MAX 55 #define MXS_PHY_TX_D_CAL_MIN 79 #define MXS_PHY_TX_D_CAL_MAX 119 struct mxs_phy_data { unsigned int flags; }; static const struct mxs_phy_data imx23_phy_data = { .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, }; static const struct mxs_phy_data imx6q_phy_data = { .flags = MXS_PHY_SENDING_SOF_TOO_FAST | MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | MXS_PHY_NEED_IP_FIX, }; static const struct mxs_phy_data imx6sl_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | MXS_PHY_NEED_IP_FIX, }; static const struct mxs_phy_data vf610_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | MXS_PHY_NEED_IP_FIX, }; static const struct mxs_phy_data imx6sx_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; static const struct mxs_phy_data imx6ul_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; static const struct mxs_phy_data imx7ulp_phy_data = { }; static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); struct mxs_phy { struct usb_phy phy; struct clk *clk; const struct mxs_phy_data *data; struct regmap *regmap_anatop; int port_id; u32 tx_reg_set; u32 tx_reg_mask; }; static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) { return mxs_phy->data == &imx6q_phy_data; } static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) { return mxs_phy->data == &imx6sl_phy_data; } static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) { return mxs_phy->data == &imx7ulp_phy_data; } /* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock. */ static void mxs_phy_clock_switch_delay(void) { usleep_range(300, 400); } static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) { void __iomem *base = mxs_phy->phy.io_priv; u32 phytx; /* Update TX register if there is anything to write */ if (mxs_phy->tx_reg_mask) { phytx = readl(base + HW_USBPHY_TX); phytx &= ~mxs_phy->tx_reg_mask; phytx |= mxs_phy->tx_reg_set; writel(phytx, base + HW_USBPHY_TX); } } static int mxs_phy_pll_enable(void __iomem *base, bool enable) { int ret = 0; if (enable) { u32 value; writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET); writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR); writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET); ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC, value, (value & BM_USBPHY_PLL_LOCK) != 0, 100, 10000); if (ret) return ret; writel(BM_USBPHY_PLL_EN_USB_CLKS, base + HW_USBPHY_PLL_SIC_SET); } else { writel(BM_USBPHY_PLL_EN_USB_CLKS, base + HW_USBPHY_PLL_SIC_CLR); writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR); writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET); writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR); } return ret; } static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; void __iomem *base = mxs_phy->phy.io_priv; if (is_imx7ulp_phy(mxs_phy)) { ret = mxs_phy_pll_enable(base, true); if (ret) return ret; } ret = stmp_reset_block(base + HW_USBPHY_CTRL); if (ret) goto disable_pll; /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); /* * USB PHY Ctrl Setting * - Auto clock/power on * - Enable full/low speed support */ writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | BM_USBPHY_CTRL_ENAUTO_PWRON_PLL | BM_USBPHY_CTRL_ENUTMILEVEL2 | BM_USBPHY_CTRL_ENUTMILEVEL3, base + HW_USBPHY_CTRL_SET); if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); if (mxs_phy->regmap_anatop) { unsigned int reg = mxs_phy->port_id ? ANADIG_USB1_CHRG_DETECT_SET : ANADIG_USB2_CHRG_DETECT_SET; /* * The external charger detector needs to be disabled, * or the signal at DP will be poor */ regmap_write(mxs_phy->regmap_anatop, reg, ANADIG_USB1_CHRG_DETECT_EN_B | ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); } mxs_phy_tx_init(mxs_phy); return 0; disable_pll: if (is_imx7ulp_phy(mxs_phy)) mxs_phy_pll_enable(base, false); return ret; } /* Return true if the vbus is there */ static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) { unsigned int vbus_value = 0; if (!mxs_phy->regmap_anatop) return false; if (mxs_phy->port_id == 0) regmap_read(mxs_phy->regmap_anatop, ANADIG_USB1_VBUS_DET_STAT, &vbus_value); else if (mxs_phy->port_id == 1) regmap_read(mxs_phy->regmap_anatop, ANADIG_USB2_VBUS_DET_STAT, &vbus_value); if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID) return true; else return false; } static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) { void __iomem *base = mxs_phy->phy.io_priv; u32 reg; if (disconnect) writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, base + HW_USBPHY_DEBUG_CLR); if (mxs_phy->port_id == 0) { reg = disconnect ? ANADIG_USB1_LOOPBACK_SET : ANADIG_USB1_LOOPBACK_CLR; regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 | BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN); } else if (mxs_phy->port_id == 1) { reg = disconnect ? ANADIG_USB2_LOOPBACK_SET : ANADIG_USB2_LOOPBACK_CLR; regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 | BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN); } if (!disconnect) writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, base + HW_USBPHY_DEBUG_SET); /* Delay some time, and let Linestate be SE0 for controller */ if (disconnect) usleep_range(500, 1000); } static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy) { return mxs_phy->phy.last_event == USB_EVENT_ID; } static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) { bool vbus_is_on = false; /* If the SoCs don't need to disconnect line without vbus, quit */ if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS)) return; /* If the SoCs don't have anatop, quit */ if (!mxs_phy->regmap_anatop) return; vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy)) __mxs_phy_disconnect_line(mxs_phy, true); else __mxs_phy_disconnect_line(mxs_phy, false); } static int mxs_phy_init(struct usb_phy *phy) { int ret; struct mxs_phy *mxs_phy = to_mxs_phy(phy); mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; return mxs_phy_hw_init(mxs_phy); } static void mxs_phy_shutdown(struct usb_phy *phy) { struct mxs_phy *mxs_phy = to_mxs_phy(phy); u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | BM_USBPHY_CTRL_ENDPDMCHG_WKUP | BM_USBPHY_CTRL_ENIDCHG_WKUP | BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | BM_USBPHY_CTRL_ENAUTO_PWRON_PLL; writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR); writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD); writel(BM_USBPHY_CTRL_CLKGATE, phy->io_priv + HW_USBPHY_CTRL_SET); if (is_imx7ulp_phy(mxs_phy)) mxs_phy_pll_enable(phy->io_priv, false); clk_disable_unprepare(mxs_phy->clk); } static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy) { unsigned int line_state; /* bit definition is the same for all controllers */ unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS, dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS; unsigned int reg = ANADIG_USB1_MISC; /* If the SoCs don't have anatop, quit */ if (!mxs_phy->regmap_anatop) return false; if (mxs_phy->port_id == 0) reg = ANADIG_USB1_MISC; else if (mxs_phy->port_id == 1) reg = ANADIG_USB2_MISC; regmap_read(mxs_phy->regmap_anatop, reg, &line_state); if ((line_state & (dp_bit | dm_bit)) == dm_bit) return true; else return false; } static int mxs_phy_suspend(struct usb_phy *x, int suspend) { int ret; struct mxs_phy *mxs_phy = to_mxs_phy(x); bool low_speed_connection, vbus_is_on; low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy); vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); if (suspend) { /* * FIXME: Do not power down RXPWD1PT1 bit for low speed * connect. The low speed connection will have problem at * very rare cases during usb suspend and resume process. */ if (low_speed_connection & vbus_is_on) { /* * If value to be set as pwd value is not 0xffffffff, * several 32Khz cycles are needed. */ mxs_phy_clock_switch_delay(); writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD); } else { writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); } writel(BM_USBPHY_CTRL_CLKGATE, x->io_priv + HW_USBPHY_CTRL_SET); clk_disable_unprepare(mxs_phy->clk); } else { mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; writel(BM_USBPHY_CTRL_CLKGATE, x->io_priv + HW_USBPHY_CTRL_CLR); writel(0, x->io_priv + HW_USBPHY_PWD); } return 0; } static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled) { struct mxs_phy *mxs_phy = to_mxs_phy(x); u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | BM_USBPHY_CTRL_ENDPDMCHG_WKUP | BM_USBPHY_CTRL_ENIDCHG_WKUP; if (enabled) { mxs_phy_disconnect_line(mxs_phy, true); writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET); } else { writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR); mxs_phy_disconnect_line(mxs_phy, false); } return 0; } static int mxs_phy_on_connect(struct usb_phy *phy, enum usb_device_speed speed) { dev_dbg(phy->dev, "%s device has connected\n", (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, phy->io_priv + HW_USBPHY_CTRL_SET); return 0; } static int mxs_phy_on_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { dev_dbg(phy->dev, "%s device has disconnected\n", (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); /* Sometimes, the speed is not high speed when the error occurs */ if (readl(phy->io_priv + HW_USBPHY_CTRL) & BM_USBPHY_CTRL_ENHOSTDISCONDETECT) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, phy->io_priv + HW_USBPHY_CTRL_CLR); return 0; } #define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT 100 static int mxs_charger_data_contact_detect(struct mxs_phy *x) { struct regmap *regmap = x->regmap_anatop; int i, stable_contact_count = 0; u32 val; /* Check if vbus is valid */ regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val); if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) { dev_err(x->phy.dev, "vbus is not valid\n"); return -EINVAL; } /* Enable charger detector */ regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, ANADIG_USB1_CHRG_DETECT_EN_B); /* * - Do not check whether a charger is connected to the USB port * - Check whether the USB plug has been in contact with each other */ regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); /* Check if plug is connected */ for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) { regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) { stable_contact_count++; if (stable_contact_count > 5) /* Data pin makes contact */ break; else usleep_range(5000, 10000); } else { stable_contact_count = 0; usleep_range(5000, 6000); } } if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) { dev_err(x->phy.dev, "Data pin can't make good contact.\n"); /* Disable charger detector */ regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, ANADIG_USB1_CHRG_DETECT_EN_B | ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); return -ENXIO; } return 0; } static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x) { struct regmap *regmap = x->regmap_anatop; enum usb_charger_type chgr_type = UNKNOWN_TYPE; u32 val; /* * - Do check whether a charger is connected to the USB port * - Do not Check whether the USB plug has been in contact with * each other */ regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); msleep(100); /* Check if it is a charger */ regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) { chgr_type = SDP_TYPE; dev_dbg(x->phy.dev, "It is a standard downstream port\n"); } /* Disable charger detector */ regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, ANADIG_USB1_CHRG_DETECT_EN_B | ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); return chgr_type; } /* * It must be called after DP is pulled up, which is used to * differentiate DCP and CDP. */ static enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x) { struct regmap *regmap = x->regmap_anatop; int val; msleep(80); regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) { dev_dbg(x->phy.dev, "It is a dedicate charging port\n"); return DCP_TYPE; } else { dev_dbg(x->phy.dev, "It is a charging downstream port\n"); return CDP_TYPE; } } static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy) { struct mxs_phy *mxs_phy = to_mxs_phy(phy); struct regmap *regmap = mxs_phy->regmap_anatop; void __iomem *base = phy->io_priv; enum usb_charger_type chgr_type = UNKNOWN_TYPE; if (!regmap) return UNKNOWN_TYPE; if (mxs_charger_data_contact_detect(mxs_phy)) return chgr_type; chgr_type = mxs_charger_primary_detection(mxs_phy); if (chgr_type != SDP_TYPE) { /* Pull up DP via test */ writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, base + HW_USBPHY_DEBUG_CLR); regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET, ANADIG_USB1_LOOPBACK_UTMI_TESTSTART); chgr_type = mxs_charger_secondary_detection(mxs_phy); /* Stop the test */ regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR, ANADIG_USB1_LOOPBACK_UTMI_TESTSTART); writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, base + HW_USBPHY_DEBUG_SET); } return chgr_type; } static int mxs_phy_probe(struct platform_device *pdev) { void __iomem *base; struct clk *clk; struct mxs_phy *mxs_phy; int ret; const struct of_device_id *of_id; struct device_node *np = pdev->dev.of_node; u32 val; of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); if (!of_id) return -ENODEV; base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "can't get the clock, err=%ld", PTR_ERR(clk)); return PTR_ERR(clk); } mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); if (!mxs_phy) return -ENOMEM; /* Some SoCs don't have anatop registers */ if (of_get_property(np, "fsl,anatop", NULL)) { mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle (np, "fsl,anatop"); if (IS_ERR(mxs_phy->regmap_anatop)) { dev_dbg(&pdev->dev, "failed to find regmap for anatop\n"); return PTR_ERR(mxs_phy->regmap_anatop); } } /* Precompute which bits of the TX register are to be updated, if any */ if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) && val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { /* Scale to a 4-bit value */ val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0); mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val); } if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) && val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { /* Scale to a 4-bit value. */ val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0); mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val); } if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) && val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) { /* Scale to a 4-bit value. Round up the values and heavily * weight the rounding by adding 2/3 of the denominator. */ val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3) / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN); mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0); mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); } ret = of_alias_get_id(np, "usbphy"); if (ret < 0) dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); mxs_phy->port_id = ret; mxs_phy->phy.io_priv = base; mxs_phy->phy.dev = &pdev->dev; mxs_phy->phy.label = DRIVER_NAME; mxs_phy->phy.init = mxs_phy_init; mxs_phy->phy.shutdown = mxs_phy_shutdown; mxs_phy->phy.set_suspend = mxs_phy_suspend; mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; mxs_phy->phy.type = USB_PHY_TYPE_USB2; mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup; mxs_phy->phy.charger_detect = mxs_phy_charger_detect; mxs_phy->clk = clk; mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); device_set_wakeup_capable(&pdev->dev, true); return usb_add_phy_dev(&mxs_phy->phy); } static int mxs_phy_remove(struct platform_device *pdev) { struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); usb_remove_phy(&mxs_phy->phy); return 0; } #ifdef CONFIG_PM_SLEEP static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on) { unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; /* If the SoCs don't have anatop, quit */ if (!mxs_phy->regmap_anatop) return; if (is_imx6q_phy(mxs_phy)) regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG); else if (is_imx6sl_phy(mxs_phy)) regmap_write(mxs_phy->regmap_anatop, reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL); } static int mxs_phy_system_suspend(struct device *dev) { struct mxs_phy *mxs_phy = dev_get_drvdata(dev); if (device_may_wakeup(dev)) mxs_phy_enable_ldo_in_suspend(mxs_phy, true); return 0; } static int mxs_phy_system_resume(struct device *dev) { struct mxs_phy *mxs_phy = dev_get_drvdata(dev); if (device_may_wakeup(dev)) mxs_phy_enable_ldo_in_suspend(mxs_phy, false); return 0; } #endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, mxs_phy_system_resume); static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, .remove = mxs_phy_remove, .driver = { .name = DRIVER_NAME, .of_match_table = mxs_phy_dt_ids, .pm = &mxs_phy_pm, }, }; static int __init mxs_phy_module_init(void) { return platform_driver_register(&mxs_phy_driver); } postcore_initcall(mxs_phy_module_init); static void __exit mxs_phy_module_exit(void) { platform_driver_unregister(&mxs_phy_driver); } module_exit(mxs_phy_module_exit); MODULE_ALIAS("platform:mxs-usb-phy"); MODULE_AUTHOR("Marek Vasut "); MODULE_AUTHOR("Richard Zhao "); MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); MODULE_LICENSE("GPL");