// SPDX-License-Identifier: GPL-2.0-or-later /* */ #include #include #include #include #include #include #include #include #include "usbaudio.h" #include "card.h" #include "quirks.h" #include "helper.h" #include "debug.h" #include "clock.h" #include "format.h" /* * parse the audio format type I descriptor * and returns the corresponding pcm format * * @dev: usb device * @fp: audioformat record * @format: the format tag (wFormatTag) * @fmt: the format type descriptor (v1/v2) or AudioStreaming descriptor (v3) */ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip, struct audioformat *fp, u64 format, void *_fmt) { int sample_width, sample_bytes; u64 pcm_formats = 0; switch (fp->protocol) { case UAC_VERSION_1: default: { struct uac_format_type_i_discrete_descriptor *fmt = _fmt; if (format >= 64) { usb_audio_info(chip, "%u:%d: invalid format type 0x%llx is detected, processed as PCM\n", fp->iface, fp->altsetting, format); format = UAC_FORMAT_TYPE_I_PCM; } sample_width = fmt->bBitResolution; sample_bytes = fmt->bSubframeSize; format = 1ULL << format; break; } case UAC_VERSION_2: { struct uac_format_type_i_ext_descriptor *fmt = _fmt; sample_width = fmt->bBitResolution; sample_bytes = fmt->bSubslotSize; if (format & UAC2_FORMAT_TYPE_I_RAW_DATA) { pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL; /* flag potentially raw DSD capable altsettings */ fp->dsd_raw = true; } format <<= 1; break; } case UAC_VERSION_3: { struct uac3_as_header_descriptor *as = _fmt; sample_width = as->bBitResolution; sample_bytes = as->bSubslotSize; if (format & UAC3_FORMAT_TYPE_I_RAW_DATA) pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL; format <<= 1; break; } } fp->fmt_bits = sample_width; if ((pcm_formats == 0) && (format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) { /* some devices don't define this correctly... */ usb_audio_info(chip, "%u:%d : format type 0 is detected, processed as PCM\n", fp->iface, fp->altsetting); format = 1 << UAC_FORMAT_TYPE_I_PCM; } if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) { if (((chip->usb_id == USB_ID(0x0582, 0x0016)) || /* Edirol SD-90 */ (chip->usb_id == USB_ID(0x0582, 0x000c))) && /* Roland SC-D70 */ sample_width == 24 && sample_bytes == 2) sample_bytes = 3; else if (sample_width > sample_bytes * 8) { usb_audio_info(chip, "%u:%d : sample bitwidth %d in over sample bytes %d\n", fp->iface, fp->altsetting, sample_width, sample_bytes); } /* check the format byte size */ switch (sample_bytes) { case 1: pcm_formats |= SNDRV_PCM_FMTBIT_S8; break; case 2: if (snd_usb_is_big_endian_format(chip, fp)) pcm_formats |= SNDRV_PCM_FMTBIT_S16_BE; /* grrr, big endian!! */ else pcm_formats |= SNDRV_PCM_FMTBIT_S16_LE; break; case 3: if (snd_usb_is_big_endian_format(chip, fp)) pcm_formats |= SNDRV_PCM_FMTBIT_S24_3BE; /* grrr, big endian!! */ else pcm_formats |= SNDRV_PCM_FMTBIT_S24_3LE; break; case 4: pcm_formats |= SNDRV_PCM_FMTBIT_S32_LE; break; default: usb_audio_info(chip, "%u:%d : unsupported sample bitwidth %d in %d bytes\n", fp->iface, fp->altsetting, sample_width, sample_bytes); break; } } if (format & (1 << UAC_FORMAT_TYPE_I_PCM8)) { /* Dallas DS4201 workaround: it advertises U8 format, but really supports S8. */ if (chip->usb_id == USB_ID(0x04fa, 0x4201)) pcm_formats |= SNDRV_PCM_FMTBIT_S8; else pcm_formats |= SNDRV_PCM_FMTBIT_U8; } if (format & (1 << UAC_FORMAT_TYPE_I_IEEE_FLOAT)) { pcm_formats |= SNDRV_PCM_FMTBIT_FLOAT_LE; } if (format & (1 << UAC_FORMAT_TYPE_I_ALAW)) { pcm_formats |= SNDRV_PCM_FMTBIT_A_LAW; } if (format & (1 << UAC_FORMAT_TYPE_I_MULAW)) { pcm_formats |= SNDRV_PCM_FMTBIT_MU_LAW; } if (format & ~0x3f) { usb_audio_info(chip, "%u:%d : unsupported format bits %#llx\n", fp->iface, fp->altsetting, format); } pcm_formats |= snd_usb_interface_dsd_format_quirks(chip, fp, sample_bytes); return pcm_formats; } static int set_fixed_rate(struct audioformat *fp, int rate, int rate_bits) { kfree(fp->rate_table); fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); if (!fp->rate_table) return -ENOMEM; fp->nr_rates = 1; fp->rate_min = rate; fp->rate_max = rate; fp->rates = rate_bits; fp->rate_table[0] = rate; return 0; } /* * parse the format descriptor and stores the possible sample rates * on the audioformat table (audio class v1). * * @dev: usb device * @fp: audioformat record * @fmt: the format descriptor * @offset: the start offset of descriptor pointing the rate type * (7 for type I and II, 8 for type II) */ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audioformat *fp, unsigned char *fmt, int offset) { int nr_rates = fmt[offset]; if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) { usb_audio_err(chip, "%u:%d : invalid UAC_FORMAT_TYPE desc\n", fp->iface, fp->altsetting); return -EINVAL; } if (nr_rates) { /* * build the rate table and bitmap flags */ int r, idx; fp->rate_table = kmalloc_array(nr_rates, sizeof(int), GFP_KERNEL); if (fp->rate_table == NULL) return -ENOMEM; fp->nr_rates = 0; fp->rate_min = fp->rate_max = 0; for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) { unsigned int rate = combine_triple(&fmt[idx]); if (!rate) continue; /* C-Media CM6501 mislabels its 96 kHz altsetting */ /* Terratec Aureon 7.1 USB C-Media 6206, too */ /* Ozone Z90 USB C-Media, too */ if (rate == 48000 && nr_rates == 1 && (chip->usb_id == USB_ID(0x0d8c, 0x0201) || chip->usb_id == USB_ID(0x0d8c, 0x0102) || chip->usb_id == USB_ID(0x0d8c, 0x0078) || chip->usb_id == USB_ID(0x0ccd, 0x00b1)) && fp->altsetting == 5 && fp->maxpacksize == 392) rate = 96000; /* Creative VF0420/VF0470 Live Cams report 16 kHz instead of 8kHz */ if (rate == 16000 && (chip->usb_id == USB_ID(0x041e, 0x4064) || chip->usb_id == USB_ID(0x041e, 0x4068))) rate = 8000; fp->rate_table[fp->nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) fp->rate_min = rate; if (!fp->rate_max || rate > fp->rate_max) fp->rate_max = rate; fp->rates |= snd_pcm_rate_to_rate_bit(rate); fp->nr_rates++; } if (!fp->nr_rates) { hwc_debug("All rates were zero. Skipping format!\n"); return -EINVAL; } } else { /* continuous rates */ fp->rates = SNDRV_PCM_RATE_CONTINUOUS; fp->rate_min = combine_triple(&fmt[offset + 1]); fp->rate_max = combine_triple(&fmt[offset + 4]); } /* Jabra Evolve 65 headset */ if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) { /* only 48kHz for playback while keeping 16kHz for capture */ if (fp->nr_rates != 1) return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); } return 0; } /* * Presonus Studio 1810c supports a limited set of sampling * rates per altsetting but reports the full set each time. * If we don't filter out the unsupported rates and attempt * to configure the card, it will hang refusing to do any * further audio I/O until a hard reset is performed. * * The list of supported rates per altsetting (set of available * I/O channels) is described in the owner's manual, section 2.2. */ static bool s1810c_valid_sample_rate(struct audioformat *fp, unsigned int rate) { switch (fp->altsetting) { case 1: /* All ADAT ports available */ return rate <= 48000; case 2: /* Half of ADAT ports available */ return (rate == 88200 || rate == 96000); case 3: /* Analog I/O only (no S/PDIF nor ADAT) */ return rate >= 176400; default: return false; } return false; } /* * Many Focusrite devices supports a limited set of sampling rates per * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type * descriptor which has a non-standard bLength = 10. */ static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip, struct audioformat *fp, unsigned int rate) { struct usb_interface *iface; struct usb_host_interface *alts; unsigned char *fmt; unsigned int max_rate; iface = usb_ifnum_to_if(chip->dev, fp->iface); if (!iface) return true; alts = &iface->altsetting[fp->altset_idx]; fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE); if (!fmt) return true; if (fmt[0] == 10) { /* bLength */ max_rate = combine_quad(&fmt[6]); /* Validate max rate */ if (max_rate != 48000 && max_rate != 96000 && max_rate != 192000 && max_rate != 384000) { usb_audio_info(chip, "%u:%d : unexpected max rate: %u\n", fp->iface, fp->altsetting, max_rate); return true; } return rate <= max_rate; } return true; } /* * Helper function to walk the array of sample rate triplets reported by * the device. The problem is that we need to parse whole array first to * get to know how many sample rates we have to expect. * Then fp->rate_table can be allocated and filled. */ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, struct audioformat *fp, int nr_triplets, const unsigned char *data) { int i, nr_rates = 0; fp->rates = fp->rate_min = fp->rate_max = 0; for (i = 0; i < nr_triplets; i++) { int min = combine_quad(&data[2 + 12 * i]); int max = combine_quad(&data[6 + 12 * i]); int res = combine_quad(&data[10 + 12 * i]); unsigned int rate; if ((max < 0) || (min < 0) || (res < 0) || (max < min)) continue; /* * for ranges with res == 1, we announce a continuous sample * rate range, and this function should return 0 for no further * parsing. */ if (res == 1) { fp->rate_min = min; fp->rate_max = max; fp->rates = SNDRV_PCM_RATE_CONTINUOUS; return 0; } for (rate = min; rate <= max; rate += res) { /* Filter out invalid rates on Presonus Studio 1810c */ if (chip->usb_id == USB_ID(0x194f, 0x010c) && !s1810c_valid_sample_rate(fp, rate)) goto skip_rate; /* Filter out invalid rates on Focusrite devices */ if (USB_ID_VENDOR(chip->usb_id) == 0x1235 && !focusrite_valid_sample_rate(chip, fp, rate)) goto skip_rate; if (fp->rate_table) fp->rate_table[nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) fp->rate_min = rate; if (!fp->rate_max || rate > fp->rate_max) fp->rate_max = rate; fp->rates |= snd_pcm_rate_to_rate_bit(rate); nr_rates++; if (nr_rates >= MAX_NR_RATES) { usb_audio_err(chip, "invalid uac2 rates\n"); break; } skip_rate: /* avoid endless loop */ if (res == 0) break; } } return nr_rates; } /* Line6 Helix series and the Rode Rodecaster Pro don't support the * UAC2_CS_RANGE usb function call. Return a static table of known * clock rates. */ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip, struct audioformat *fp) { switch (chip->usb_id) { case USB_ID(0x0e41, 0x4241): /* Line6 Helix */ case USB_ID(0x0e41, 0x4242): /* Line6 Helix Rack */ case USB_ID(0x0e41, 0x4244): /* Line6 Helix LT */ case USB_ID(0x0e41, 0x4246): /* Line6 HX-Stomp */ case USB_ID(0x0e41, 0x4253): /* Line6 HX-Stomp XL */ case USB_ID(0x0e41, 0x4247): /* Line6 Pod Go */ case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */ case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */ case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */ case USB_ID(0x0e41, 0x424b): /* Line6 Pod Go */ case USB_ID(0x19f7, 0x0011): /* Rode Rodecaster Pro */ return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); } return -ENODEV; } /* * parse the format descriptor and stores the possible sample rates * on the audioformat table (audio class v2 and v3). */ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, struct audioformat *fp) { struct usb_device *dev = chip->dev; unsigned char tmp[2], *data; int nr_triplets, data_size, ret = 0, ret_l6; int clock = snd_usb_clock_find_source(chip, fp, false); if (clock < 0) { dev_err(&dev->dev, "%s(): unable to find clock source (clock %d)\n", __func__, clock); goto err; } /* get the number of sample rates first by only fetching 2 bytes */ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, snd_usb_ctrl_intf(chip) | (clock << 8), tmp, sizeof(tmp)); if (ret < 0) { /* line6 helix devices don't support UAC2_CS_CONTROL_SAM_FREQ call */ ret_l6 = line6_parse_audio_format_rates_quirk(chip, fp); if (ret_l6 == -ENODEV) { /* no line6 device found continue showing the error */ dev_err(&dev->dev, "%s(): unable to retrieve number of sample rates (clock %d)\n", __func__, clock); goto err; } if (ret_l6 == 0) { dev_info(&dev->dev, "%s(): unable to retrieve number of sample rates: set it to a predefined value (clock %d).\n", __func__, clock); return 0; } ret = ret_l6; goto err; } nr_triplets = (tmp[1] << 8) | tmp[0]; data_size = 2 + 12 * nr_triplets; data = kzalloc(data_size, GFP_KERNEL); if (!data) { ret = -ENOMEM; goto err; } /* now get the full information */ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE, USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, UAC2_CS_CONTROL_SAM_FREQ << 8, snd_usb_ctrl_intf(chip) | (clock << 8), data, data_size); if (ret < 0) { dev_err(&dev->dev, "%s(): unable to retrieve sample rate range (clock %d)\n", __func__, clock); ret = -EINVAL; goto err_free; } /* Call the triplet parser, and make sure fp->rate_table is NULL. * We just use the return value to know how many sample rates we * will have to deal with. */ kfree(fp->rate_table); fp->rate_table = NULL; fp->nr_rates = parse_uac2_sample_rate_range(chip, fp, nr_triplets, data); if (fp->nr_rates == 0) { /* SNDRV_PCM_RATE_CONTINUOUS */ ret = 0; goto err_free; } fp->rate_table = kmalloc_array(fp->nr_rates, sizeof(int), GFP_KERNEL); if (!fp->rate_table) { ret = -ENOMEM; goto err_free; } /* Call the triplet parser again, but this time, fp->rate_table is * allocated, so the rates will be stored */ parse_uac2_sample_rate_range(chip, fp, nr_triplets, data); err_free: kfree(data); err: return ret; } /* * parse the format type I and III descriptors */ static int parse_audio_format_i(struct snd_usb_audio *chip, struct audioformat *fp, u64 format, void *_fmt) { snd_pcm_format_t pcm_format; unsigned int fmt_type; int ret; switch (fp->protocol) { default: case UAC_VERSION_1: case UAC_VERSION_2: { struct uac_format_type_i_continuous_descriptor *fmt = _fmt; fmt_type = fmt->bFormatType; break; } case UAC_VERSION_3: { /* fp->fmt_type is already set in this case */ fmt_type = fp->fmt_type; break; } } if (fmt_type == UAC_FORMAT_TYPE_III) { /* FIXME: the format type is really IECxxx * but we give normal PCM format to get the existing * apps working... */ switch (chip->usb_id) { case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ if (chip->setup == 0x00 && fp->altsetting == 6) pcm_format = SNDRV_PCM_FORMAT_S16_BE; else pcm_format = SNDRV_PCM_FORMAT_S16_LE; break; default: pcm_format = SNDRV_PCM_FORMAT_S16_LE; } fp->formats = pcm_format_to_bits(pcm_format); } else { fp->formats = parse_audio_format_i_type(chip, fp, format, _fmt); if (!fp->formats) return -EINVAL; } /* gather possible sample rates */ /* audio class v1 reports possible sample rates as part of the * proprietary class specific descriptor. * audio class v2 uses class specific EP0 range requests for that. */ switch (fp->protocol) { default: case UAC_VERSION_1: { struct uac_format_type_i_continuous_descriptor *fmt = _fmt; fp->channels = fmt->bNrChannels; ret = parse_audio_format_rates_v1(chip, fp, (unsigned char *) fmt, 7); break; } case UAC_VERSION_2: case UAC_VERSION_3: { /* fp->channels is already set in this case */ ret = parse_audio_format_rates_v2v3(chip, fp); break; } } if (fp->channels < 1) { usb_audio_err(chip, "%u:%d : invalid channels %d\n", fp->iface, fp->altsetting, fp->channels); return -EINVAL; } return ret; } /* * parse the format type II descriptor */ static int parse_audio_format_ii(struct snd_usb_audio *chip, struct audioformat *fp, u64 format, void *_fmt) { int brate, framesize, ret; switch (format) { case UAC_FORMAT_TYPE_II_AC3: /* FIXME: there is no AC3 format defined yet */ // fp->formats = SNDRV_PCM_FMTBIT_AC3; fp->formats = SNDRV_PCM_FMTBIT_U8; /* temporary hack to receive byte streams */ break; case UAC_FORMAT_TYPE_II_MPEG: fp->formats = SNDRV_PCM_FMTBIT_MPEG; break; default: usb_audio_info(chip, "%u:%d : unknown format tag %#llx is detected. processed as MPEG.\n", fp->iface, fp->altsetting, format); fp->formats = SNDRV_PCM_FMTBIT_MPEG; break; } fp->channels = 1; switch (fp->protocol) { default: case UAC_VERSION_1: { struct uac_format_type_ii_discrete_descriptor *fmt = _fmt; brate = le16_to_cpu(fmt->wMaxBitRate); framesize = le16_to_cpu(fmt->wSamplesPerFrame); usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize); fp->frame_size = framesize; ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */ break; } case UAC_VERSION_2: { struct uac_format_type_ii_ext_descriptor *fmt = _fmt; brate = le16_to_cpu(fmt->wMaxBitRate); framesize = le16_to_cpu(fmt->wSamplesPerFrame); usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize); fp->frame_size = framesize; ret = parse_audio_format_rates_v2v3(chip, fp); break; } } return ret; } int snd_usb_parse_audio_format(struct snd_usb_audio *chip, struct audioformat *fp, u64 format, struct uac_format_type_i_continuous_descriptor *fmt, int stream) { int err; switch (fmt->bFormatType) { case UAC_FORMAT_TYPE_I: case UAC_FORMAT_TYPE_III: err = parse_audio_format_i(chip, fp, format, fmt); break; case UAC_FORMAT_TYPE_II: err = parse_audio_format_ii(chip, fp, format, fmt); break; default: usb_audio_info(chip, "%u:%d : format type %d is not supported yet\n", fp->iface, fp->altsetting, fmt->bFormatType); return -ENOTSUPP; } fp->fmt_type = fmt->bFormatType; if (err < 0) return err; #if 1 /* FIXME: temporary hack for extigy/audigy 2 nx/zs */ /* extigy apparently supports sample rates other than 48k * but not in ordinary way. so we enable only 48k atm. */ if (chip->usb_id == USB_ID(0x041e, 0x3000) || chip->usb_id == USB_ID(0x041e, 0x3020) || chip->usb_id == USB_ID(0x041e, 0x3061)) { if (fmt->bFormatType == UAC_FORMAT_TYPE_I && fp->rates != SNDRV_PCM_RATE_48000 && fp->rates != SNDRV_PCM_RATE_96000) return -ENOTSUPP; } #endif return 0; } int snd_usb_parse_audio_format_v3(struct snd_usb_audio *chip, struct audioformat *fp, struct uac3_as_header_descriptor *as, int stream) { u64 format = le64_to_cpu(as->bmFormats); int err; /* * Type I format bits are D0..D6 * This test works because type IV is not supported */ if (format & 0x7f) fp->fmt_type = UAC_FORMAT_TYPE_I; else fp->fmt_type = UAC_FORMAT_TYPE_III; err = parse_audio_format_i(chip, fp, format, as); if (err < 0) return err; return 0; }