Adding upstream version 2.9.4.upstream/2.9.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 3893 insertions, 0 deletions

diff --git a/manual/Makefile.am b/manual/Makefile.am
new file mode 100644
index 0000000..8da1883
--- /dev/null
+++ b/manual/Makefile.am
@@ -0,0 +1,108 @@
+## Process this file with automake to produce Makefile.in
+##
+## Copyright (C) 1995 Graeme Wilford.
+## Copyright (C) 2001, 2007 Colin Watson.
+##
+## This file is part of man-db.
+##
+## man-db is free software; you can redistribute it and/or modify it
+## under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## man-db is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with man-db; if not, write to the Free Software Foundation,
+## Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+ME_FILES = \
+	comp.me \
+	db.me \
+	files.me \
+	format.me \
+	glossary.me \
+	intro.me \
+	leader.me \
+	man_db.me \
+	misc.me \
+	sec.me
+
+MANUAL = man_db
+MANUAL_INSTALL = man-db-manual
+
+dist_noinst_DATA = \
+	README \
+	$(ME_FILES) \
+	options-only.me \
+	print-options
+
+if BUILD_MANUAL
+noinst_DATA = \
+	$(MANUAL).cat \
+	$(MANUAL).ps
+
+CLEANFILES = \
+	$(noinst_DATA) \
+	$(MANUAL).dvi \
+	$(MANUAL).html \
+	$(MANUAL).pp \
+	$(MANUAL).tdvi \
+	$(MANUAL).tps \
+	version
+
+SOELIM = soelim
+
+version: $(top_srcdir)/configure.ac
+	echo '.ds V $(roff_version)' > $@
+
+$(MANUAL).pp: $(ME_FILES) version
+	$(SOELIM) -I$(srcdir) man_db.me | tbl > $@.new && mv -f $@.new $@
+
+.pp.dvi:
+	$(TROFF) -me -Tdvi $< > $@.new && mv -f $@.new $@
+
+.pp.ps:
+	$(TROFF) -me -Tps $< > $@.new && mv -f $@.new $@
+
+.pp.tdvi:
+	$(TROFF) -me -Tdvi $< | grodvi -d > $@.new && mv -f $@.new $@
+
+.tdvi.tps:
+	dvips -f -t a4 $< > $@.new && mv -f $@.new $@
+
+.pp.cat:
+	LC_ALL=C nroff -me $< > $@.new && mv -f $@.new $@
+
+.pp.html:
+	$(TROFF) -me -Thtml -P-I$* $< > $@.new && mv -f $@.new $@
+
+# Automake defines these targets already, so we need to use -local.
+dvi-local: $(MANUAL).dvi
+ps-local: $(MANUAL).ps
+html-local: $(MANUAL).html
+
+# These are all ours.
+cat: $(MANUAL).cat
+tps: $(MANUAL).tps
+
+clean-local:
+	-rm -f $(MANUAL)-*.png
+
+install-data-hook:
+	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+	@if test -f $(MANUAL).cat; then \
+		echo " $(INSTALL_DATA) $(MANUAL).cat '$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).txt'"; \
+		$(INSTALL_DATA) $(MANUAL).cat "$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).txt" || exit $$?; \
+	fi
+	@if test -f $(MANUAL).ps; then \
+		echo " $(INSTALL_DATA) $(MANUAL).ps '$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).ps'"; \
+		$(INSTALL_DATA) $(MANUAL).ps "$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).ps" || exit $$?; \
+	fi
+
+uninstall-hook:
+	rm -rf "$(DESTDIR)$(docdir)"
+endif
diff --git a/manual/Makefile.in b/manual/Makefile.in
new file mode 100644
index 0000000..a455bdc
--- /dev/null
+++ b/manual/Makefile.in
@@ -0,0 +1,1720 @@
+# Makefile.in generated by automake 1.16.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = manual
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/man-arg-automatic-create.m4 \
+	$(top_srcdir)/m4/man-arg-automatic-update.m4 \
+	$(top_srcdir)/m4/man-arg-cache-owner.m4 \
+	$(top_srcdir)/m4/man-arg-cats.m4 \
+	$(top_srcdir)/m4/man-arg-config-file.m4 \
+	$(top_srcdir)/m4/man-arg-db.m4 \
+	$(top_srcdir)/m4/man-arg-device.m4 \
+	$(top_srcdir)/m4/man-arg-mandirs.m4 \
+	$(top_srcdir)/m4/man-arg-manual.m4 \
+	$(top_srcdir)/m4/man-arg-override-dir.m4 \
+	$(top_srcdir)/m4/man-arg-sections.m4 \
+	$(top_srcdir)/m4/man-arg-setuid.m4 \
+	$(top_srcdir)/m4/man-arg-systemdsystemunitdir.m4 \
+	$(top_srcdir)/m4/man-arg-systemdtmpfilesdir.m4 \
+	$(top_srcdir)/m4/man-arg-undoc.m4 $(top_srcdir)/m4/man-bdb.m4 \
+	$(top_srcdir)/m4/man-check-progs.m4 \
+	$(top_srcdir)/m4/man-compress-lib.m4 \
+	$(top_srcdir)/m4/man-gnu-nroff.m4 \
+	$(top_srcdir)/m4/man-heirloom-nroff.m4 \
+	$(top_srcdir)/m4/man-libseccomp.m4 \
+	$(top_srcdir)/m4/man-linguas.m4 $(top_srcdir)/m4/man-po4a.m4 \
+	$(top_srcdir)/m4/man-tar-sort-name.m4 \
+	$(top_srcdir)/m4/man-trans-subst.m4 \
+	$(top_srcdir)/gl/m4/00gnulib.m4 \
+	$(top_srcdir)/gl/m4/__inline.m4 \
+	$(top_srcdir)/gl/m4/absolute-header.m4 \
+	$(top_srcdir)/gl/m4/alloca.m4 $(top_srcdir)/gl/m4/argp.m4 \
+	$(top_srcdir)/gl/m4/asm-underscore.m4 \
+	$(top_srcdir)/gl/m4/btowc.m4 \
+	$(top_srcdir)/gl/m4/builtin-expect.m4 \
+	$(top_srcdir)/gl/m4/canonicalize.m4 \
+	$(top_srcdir)/gl/m4/chdir-long.m4 $(top_srcdir)/gl/m4/chown.m4 \
+	$(top_srcdir)/gl/m4/clock_time.m4 $(top_srcdir)/gl/m4/close.m4 \
+	$(top_srcdir)/gl/m4/closedir.m4 $(top_srcdir)/gl/m4/codeset.m4 \
+	$(top_srcdir)/gl/m4/ctype.m4 $(top_srcdir)/gl/m4/d-ino.m4 \
+	$(top_srcdir)/gl/m4/d-type.m4 $(top_srcdir)/gl/m4/dirent_h.m4 \
+	$(top_srcdir)/gl/m4/dirfd.m4 $(top_srcdir)/gl/m4/dirname.m4 \
+	$(top_srcdir)/gl/m4/double-slash-root.m4 \
+	$(top_srcdir)/gl/m4/dup.m4 $(top_srcdir)/gl/m4/dup2.m4 \
+	$(top_srcdir)/gl/m4/eealloc.m4 $(top_srcdir)/gl/m4/environ.m4 \
+	$(top_srcdir)/gl/m4/errno_h.m4 $(top_srcdir)/gl/m4/error.m4 \
+	$(top_srcdir)/gl/m4/exponentd.m4 \
+	$(top_srcdir)/gl/m4/extensions.m4 \
+	$(top_srcdir)/gl/m4/extern-inline.m4 \
+	$(top_srcdir)/gl/m4/fchdir.m4 $(top_srcdir)/gl/m4/fcntl-o.m4 \
+	$(top_srcdir)/gl/m4/fcntl.m4 $(top_srcdir)/gl/m4/fcntl_h.m4 \
+	$(top_srcdir)/gl/m4/fdopendir.m4 \
+	$(top_srcdir)/gl/m4/filenamecat.m4 \
+	$(top_srcdir)/gl/m4/flexmember.m4 \
+	$(top_srcdir)/gl/m4/float_h.m4 $(top_srcdir)/gl/m4/flock.m4 \
+	$(top_srcdir)/gl/m4/fnmatch.m4 \
+	$(top_srcdir)/gl/m4/fnmatch_h.m4 $(top_srcdir)/gl/m4/fstat.m4 \
+	$(top_srcdir)/gl/m4/fstatat.m4 $(top_srcdir)/gl/m4/futimens.m4 \
+	$(top_srcdir)/gl/m4/getcwd-abort-bug.m4 \
+	$(top_srcdir)/gl/m4/getcwd-path-max.m4 \
+	$(top_srcdir)/gl/m4/getcwd.m4 $(top_srcdir)/gl/m4/getdelim.m4 \
+	$(top_srcdir)/gl/m4/getdtablesize.m4 \
+	$(top_srcdir)/gl/m4/getline.m4 $(top_srcdir)/gl/m4/getlogin.m4 \
+	$(top_srcdir)/gl/m4/getlogin_r.m4 \
+	$(top_srcdir)/gl/m4/getopt.m4 \
+	$(top_srcdir)/gl/m4/getpagesize.m4 \
+	$(top_srcdir)/gl/m4/getprogname.m4 \
+	$(top_srcdir)/gl/m4/gettext.m4 $(top_srcdir)/gl/m4/gettime.m4 \
+	$(top_srcdir)/gl/m4/gettimeofday.m4 \
+	$(top_srcdir)/gl/m4/glibc21.m4 $(top_srcdir)/gl/m4/glob.m4 \
+	$(top_srcdir)/gl/m4/glob_h.m4 \
+	$(top_srcdir)/gl/m4/gnulib-common.m4 \
+	$(top_srcdir)/gl/m4/gnulib-comp.m4 \
+	$(top_srcdir)/gl/m4/host-cpu-c-abi.m4 \
+	$(top_srcdir)/gl/m4/iconv.m4 $(top_srcdir)/gl/m4/idpriv.m4 \
+	$(top_srcdir)/gl/m4/include_next.m4 \
+	$(top_srcdir)/gl/m4/intlmacosx.m4 \
+	$(top_srcdir)/gl/m4/intmax_t.m4 \
+	$(top_srcdir)/gl/m4/inttypes.m4 \
+	$(top_srcdir)/gl/m4/inttypes_h.m4 $(top_srcdir)/gl/m4/ioctl.m4 \
+	$(top_srcdir)/gl/m4/isblank.m4 \
+	$(top_srcdir)/gl/m4/langinfo_h.m4 \
+	$(top_srcdir)/gl/m4/largefile.m4 $(top_srcdir)/gl/m4/lchown.m4 \
+	$(top_srcdir)/gl/m4/lib-ignore.m4 \
+	$(top_srcdir)/gl/m4/lib-ld.m4 $(top_srcdir)/gl/m4/lib-link.m4 \
+	$(top_srcdir)/gl/m4/lib-prefix.m4 \
+	$(top_srcdir)/gl/m4/libtool.m4 $(top_srcdir)/gl/m4/limits-h.m4 \
+	$(top_srcdir)/gl/m4/localcharset.m4 \
+	$(top_srcdir)/gl/m4/locale-fr.m4 \
+	$(top_srcdir)/gl/m4/locale-ja.m4 \
+	$(top_srcdir)/gl/m4/locale-zh.m4 \
+	$(top_srcdir)/gl/m4/locale_h.m4 \
+	$(top_srcdir)/gl/m4/localeconv.m4 \
+	$(top_srcdir)/gl/m4/localtime-buffer.m4 \
+	$(top_srcdir)/gl/m4/lock.m4 $(top_srcdir)/gl/m4/lstat.m4 \
+	$(top_srcdir)/gl/m4/ltoptions.m4 \
+	$(top_srcdir)/gl/m4/ltsugar.m4 \
+	$(top_srcdir)/gl/m4/ltversion.m4 \
+	$(top_srcdir)/gl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/gl/m4/malloc.m4 $(top_srcdir)/gl/m4/malloca.m4 \
+	$(top_srcdir)/gl/m4/manywarnings.m4 \
+	$(top_srcdir)/gl/m4/mbrtowc.m4 $(top_srcdir)/gl/m4/mbsinit.m4 \
+	$(top_srcdir)/gl/m4/mbsrtowcs.m4 \
+	$(top_srcdir)/gl/m4/mbstate_t.m4 $(top_srcdir)/gl/m4/mbtowc.m4 \
+	$(top_srcdir)/gl/m4/memchr.m4 $(top_srcdir)/gl/m4/memmem.m4 \
+	$(top_srcdir)/gl/m4/mempcpy.m4 $(top_srcdir)/gl/m4/memrchr.m4 \
+	$(top_srcdir)/gl/m4/minmax.m4 $(top_srcdir)/gl/m4/mkdir.m4 \
+	$(top_srcdir)/gl/m4/mkdtemp.m4 $(top_srcdir)/gl/m4/mkstemp.m4 \
+	$(top_srcdir)/gl/m4/mmap-anon.m4 $(top_srcdir)/gl/m4/mode_t.m4 \
+	$(top_srcdir)/gl/m4/msvc-inval.m4 \
+	$(top_srcdir)/gl/m4/msvc-nothrow.m4 \
+	$(top_srcdir)/gl/m4/multiarch.m4 \
+	$(top_srcdir)/gl/m4/nanosleep.m4 \
+	$(top_srcdir)/gl/m4/nl_langinfo.m4 $(top_srcdir)/gl/m4/nls.m4 \
+	$(top_srcdir)/gl/m4/nocrash.m4 \
+	$(top_srcdir)/gl/m4/nonblocking.m4 \
+	$(top_srcdir)/gl/m4/off_t.m4 \
+	$(top_srcdir)/gl/m4/open-cloexec.m4 \
+	$(top_srcdir)/gl/m4/open-slash.m4 $(top_srcdir)/gl/m4/open.m4 \
+	$(top_srcdir)/gl/m4/openat.m4 $(top_srcdir)/gl/m4/opendir.m4 \
+	$(top_srcdir)/gl/m4/pathmax.m4 $(top_srcdir)/gl/m4/po.m4 \
+	$(top_srcdir)/gl/m4/printf.m4 $(top_srcdir)/gl/m4/progtest.m4 \
+	$(top_srcdir)/gl/m4/pthread_rwlock_rdlock.m4 \
+	$(top_srcdir)/gl/m4/raise.m4 $(top_srcdir)/gl/m4/rawmemchr.m4 \
+	$(top_srcdir)/gl/m4/readdir.m4 $(top_srcdir)/gl/m4/readlink.m4 \
+	$(top_srcdir)/gl/m4/realloc.m4 $(top_srcdir)/gl/m4/regex.m4 \
+	$(top_srcdir)/gl/m4/rename.m4 $(top_srcdir)/gl/m4/renameat.m4 \
+	$(top_srcdir)/gl/m4/rewinddir.m4 $(top_srcdir)/gl/m4/rmdir.m4 \
+	$(top_srcdir)/gl/m4/same.m4 $(top_srcdir)/gl/m4/save-cwd.m4 \
+	$(top_srcdir)/gl/m4/select.m4 $(top_srcdir)/gl/m4/setenv.m4 \
+	$(top_srcdir)/gl/m4/setlocale_null.m4 \
+	$(top_srcdir)/gl/m4/sigaction.m4 \
+	$(top_srcdir)/gl/m4/signal_h.m4 \
+	$(top_srcdir)/gl/m4/signalblocking.m4 \
+	$(top_srcdir)/gl/m4/size_max.m4 $(top_srcdir)/gl/m4/sleep.m4 \
+	$(top_srcdir)/gl/m4/socketlib.m4 \
+	$(top_srcdir)/gl/m4/sockets.m4 $(top_srcdir)/gl/m4/socklen.m4 \
+	$(top_srcdir)/gl/m4/ssize_t.m4 \
+	$(top_srcdir)/gl/m4/stat-time.m4 $(top_srcdir)/gl/m4/stat.m4 \
+	$(top_srcdir)/gl/m4/std-gnu11.m4 \
+	$(top_srcdir)/gl/m4/stdalign.m4 $(top_srcdir)/gl/m4/stdarg.m4 \
+	$(top_srcdir)/gl/m4/stdbool.m4 $(top_srcdir)/gl/m4/stddef_h.m4 \
+	$(top_srcdir)/gl/m4/stdint.m4 $(top_srcdir)/gl/m4/stdint_h.m4 \
+	$(top_srcdir)/gl/m4/stdio_h.m4 $(top_srcdir)/gl/m4/stdlib_h.m4 \
+	$(top_srcdir)/gl/m4/strcase.m4 \
+	$(top_srcdir)/gl/m4/strcasestr.m4 \
+	$(top_srcdir)/gl/m4/strchrnul.m4 $(top_srcdir)/gl/m4/strdup.m4 \
+	$(top_srcdir)/gl/m4/strerror.m4 \
+	$(top_srcdir)/gl/m4/string_h.m4 \
+	$(top_srcdir)/gl/m4/strings_h.m4 \
+	$(top_srcdir)/gl/m4/strndup.m4 $(top_srcdir)/gl/m4/strnlen.m4 \
+	$(top_srcdir)/gl/m4/strsep.m4 \
+	$(top_srcdir)/gl/m4/sys_file_h.m4 \
+	$(top_srcdir)/gl/m4/sys_ioctl_h.m4 \
+	$(top_srcdir)/gl/m4/sys_select_h.m4 \
+	$(top_srcdir)/gl/m4/sys_socket_h.m4 \
+	$(top_srcdir)/gl/m4/sys_stat_h.m4 \
+	$(top_srcdir)/gl/m4/sys_time_h.m4 \
+	$(top_srcdir)/gl/m4/sys_types_h.m4 \
+	$(top_srcdir)/gl/m4/sys_uio_h.m4 \
+	$(top_srcdir)/gl/m4/sysexits.m4 \
+	$(top_srcdir)/gl/m4/tempname.m4 \
+	$(top_srcdir)/gl/m4/threadlib.m4 $(top_srcdir)/gl/m4/time_h.m4 \
+	$(top_srcdir)/gl/m4/timespec.m4 \
+	$(top_srcdir)/gl/m4/unistd-safer.m4 \
+	$(top_srcdir)/gl/m4/unistd_h.m4 $(top_srcdir)/gl/m4/unlink.m4 \
+	$(top_srcdir)/gl/m4/unlinkat.m4 $(top_srcdir)/gl/m4/utime.m4 \
+	$(top_srcdir)/gl/m4/utime_h.m4 $(top_srcdir)/gl/m4/utimens.m4 \
+	$(top_srcdir)/gl/m4/utimes.m4 \
+	$(top_srcdir)/gl/m4/vasnprintf.m4 \
+	$(top_srcdir)/gl/m4/vasprintf.m4 \
+	$(top_srcdir)/gl/m4/visibility.m4 \
+	$(top_srcdir)/gl/m4/vsnprintf.m4 \
+	$(top_srcdir)/gl/m4/warn-on-use.m4 \
+	$(top_srcdir)/gl/m4/warnings.m4 $(top_srcdir)/gl/m4/wchar_h.m4 \
+	$(top_srcdir)/gl/m4/wchar_t.m4 $(top_srcdir)/gl/m4/wcrtomb.m4 \
+	$(top_srcdir)/gl/m4/wctype_h.m4 $(top_srcdir)/gl/m4/wint_t.m4 \
+	$(top_srcdir)/gl/m4/wmemchr.m4 $(top_srcdir)/gl/m4/wmempcpy.m4 \
+	$(top_srcdir)/gl/m4/xalloc.m4 $(top_srcdir)/gl/m4/xgetcwd.m4 \
+	$(top_srcdir)/gl/m4/xsize.m4 $(top_srcdir)/gl/m4/xstrndup.m4 \
+	$(top_srcdir)/gl/m4/xvasprintf.m4 \
+	$(top_srcdir)/gl/m4/zzgnulib.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_noinst_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(dist_noinst_DATA) $(noinst_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in README
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+ALLOCA_H = @ALLOCA_H@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+ASM_SYMBOL_PREFIX = @ASM_SYMBOL_PREFIX@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DBLIBS = @DBLIBS@
+DBTYPE = @DBTYPE@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
+ENOLINK_VALUE = @ENOLINK_VALUE@
+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
+ERRNO_H = @ERRNO_H@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FLOAT_H = @FLOAT_H@
+FNMATCH_H = @FNMATCH_H@
+GETOPT_CDEFS_H = @GETOPT_CDEFS_H@
+GETOPT_H = @GETOPT_H@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLIBC21 = @GLIBC21@
+GLOB_H = @GLOB_H@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GNULIB_ACCEPT = @GNULIB_ACCEPT@
+GNULIB_ACCEPT4 = @GNULIB_ACCEPT4@
+GNULIB_ACCESS = @GNULIB_ACCESS@
+GNULIB_ALPHASORT = @GNULIB_ALPHASORT@
+GNULIB_ATOLL = @GNULIB_ATOLL@
+GNULIB_BIND = @GNULIB_BIND@
+GNULIB_BTOWC = @GNULIB_BTOWC@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
+GNULIB_CHDIR = @GNULIB_CHDIR@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_CLOSE = @GNULIB_CLOSE@
+GNULIB_CLOSEDIR = @GNULIB_CLOSEDIR@
+GNULIB_CONNECT = @GNULIB_CONNECT@
+GNULIB_COPY_FILE_RANGE = @GNULIB_COPY_FILE_RANGE@
+GNULIB_CREAT = @GNULIB_CREAT@
+GNULIB_CTIME = @GNULIB_CTIME@
+GNULIB_DIRFD = @GNULIB_DIRFD@
+GNULIB_DPRINTF = @GNULIB_DPRINTF@
+GNULIB_DUP = @GNULIB_DUP@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_DUP3 = @GNULIB_DUP3@
+GNULIB_DUPLOCALE = @GNULIB_DUPLOCALE@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
+GNULIB_EXPLICIT_BZERO = @GNULIB_EXPLICIT_BZERO@
+GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FCHMODAT = @GNULIB_FCHMODAT@
+GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
+GNULIB_FCLOSE = @GNULIB_FCLOSE@
+GNULIB_FCNTL = @GNULIB_FCNTL@
+GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
+GNULIB_FDOPEN = @GNULIB_FDOPEN@
+GNULIB_FDOPENDIR = @GNULIB_FDOPENDIR@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FFS = @GNULIB_FFS@
+GNULIB_FFSL = @GNULIB_FFSL@
+GNULIB_FFSLL = @GNULIB_FFSLL@
+GNULIB_FGETC = @GNULIB_FGETC@
+GNULIB_FGETS = @GNULIB_FGETS@
+GNULIB_FLOCK = @GNULIB_FLOCK@
+GNULIB_FNMATCH = @GNULIB_FNMATCH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FPRINTF = @GNULIB_FPRINTF@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FPURGE = @GNULIB_FPURGE@
+GNULIB_FPUTC = @GNULIB_FPUTC@
+GNULIB_FPUTS = @GNULIB_FPUTS@
+GNULIB_FREAD = @GNULIB_FREAD@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSCANF = @GNULIB_FSCANF@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FSTAT = @GNULIB_FSTAT@
+GNULIB_FSTATAT = @GNULIB_FSTATAT@
+GNULIB_FSYNC = @GNULIB_FSYNC@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_FUTIMENS = @GNULIB_FUTIMENS@
+GNULIB_FWRITE = @GNULIB_FWRITE@
+GNULIB_GETC = @GNULIB_GETC@
+GNULIB_GETCHAR = @GNULIB_GETCHAR@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
+GNULIB_GETENTROPY = @GNULIB_GETENTROPY@
+GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
+GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETOPT_POSIX = @GNULIB_GETOPT_POSIX@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETPASS = @GNULIB_GETPASS@
+GNULIB_GETPEERNAME = @GNULIB_GETPEERNAME@
+GNULIB_GETSOCKNAME = @GNULIB_GETSOCKNAME@
+GNULIB_GETSOCKOPT = @GNULIB_GETSOCKOPT@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_GETTIMEOFDAY = @GNULIB_GETTIMEOFDAY@
+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
+GNULIB_GLOB = @GNULIB_GLOB@
+GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
+GNULIB_GRANTPT = @GNULIB_GRANTPT@
+GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
+GNULIB_IMAXABS = @GNULIB_IMAXABS@
+GNULIB_IMAXDIV = @GNULIB_IMAXDIV@
+GNULIB_IOCTL = @GNULIB_IOCTL@
+GNULIB_ISATTY = @GNULIB_ISATTY@
+GNULIB_ISBLANK = @GNULIB_ISBLANK@
+GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
+GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
+GNULIB_ISWDIGIT = @GNULIB_ISWDIGIT@
+GNULIB_ISWXDIGIT = @GNULIB_ISWXDIGIT@
+GNULIB_LCHMOD = @GNULIB_LCHMOD@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LINK = @GNULIB_LINK@
+GNULIB_LINKAT = @GNULIB_LINKAT@
+GNULIB_LISTEN = @GNULIB_LISTEN@
+GNULIB_LOCALECONV = @GNULIB_LOCALECONV@
+GNULIB_LOCALENAME = @GNULIB_LOCALENAME@
+GNULIB_LOCALTIME = @GNULIB_LOCALTIME@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_LSTAT = @GNULIB_LSTAT@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBRLEN = @GNULIB_MBRLEN@
+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSINIT = @GNULIB_MBSINIT@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MBTOWC = @GNULIB_MBTOWC@
+GNULIB_MEMCHR = @GNULIB_MEMCHR@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDIRAT = @GNULIB_MKDIRAT@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKFIFO = @GNULIB_MKFIFO@
+GNULIB_MKFIFOAT = @GNULIB_MKFIFOAT@
+GNULIB_MKNOD = @GNULIB_MKNOD@
+GNULIB_MKNODAT = @GNULIB_MKNODAT@
+GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
+GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
+GNULIB_MKTIME = @GNULIB_MKTIME@
+GNULIB_NANOSLEEP = @GNULIB_NANOSLEEP@
+GNULIB_NL_LANGINFO = @GNULIB_NL_LANGINFO@
+GNULIB_NONBLOCKING = @GNULIB_NONBLOCKING@
+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
+GNULIB_OPEN = @GNULIB_OPEN@
+GNULIB_OPENAT = @GNULIB_OPENAT@
+GNULIB_OPENDIR = @GNULIB_OPENDIR@
+GNULIB_OVERRIDES_STRUCT_STAT = @GNULIB_OVERRIDES_STRUCT_STAT@
+GNULIB_OVERRIDES_WINT_T = @GNULIB_OVERRIDES_WINT_T@
+GNULIB_PCLOSE = @GNULIB_PCLOSE@
+GNULIB_PERROR = @GNULIB_PERROR@
+GNULIB_PIPE = @GNULIB_PIPE@
+GNULIB_PIPE2 = @GNULIB_PIPE2@
+GNULIB_POPEN = @GNULIB_POPEN@
+GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
+GNULIB_PREAD = @GNULIB_PREAD@
+GNULIB_PRINTF = @GNULIB_PRINTF@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PSELECT = @GNULIB_PSELECT@
+GNULIB_PTHREAD_SIGMASK = @GNULIB_PTHREAD_SIGMASK@
+GNULIB_PTSNAME = @GNULIB_PTSNAME@
+GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
+GNULIB_PUTC = @GNULIB_PUTC@
+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_PUTS = @GNULIB_PUTS@
+GNULIB_PWRITE = @GNULIB_PWRITE@
+GNULIB_QSORT_R = @GNULIB_QSORT_R@
+GNULIB_RAISE = @GNULIB_RAISE@
+GNULIB_RANDOM = @GNULIB_RANDOM@
+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
+GNULIB_READ = @GNULIB_READ@
+GNULIB_READDIR = @GNULIB_READDIR@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_READLINKAT = @GNULIB_READLINKAT@
+GNULIB_REALLOCARRAY = @GNULIB_REALLOCARRAY@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_REALPATH = @GNULIB_REALPATH@
+GNULIB_RECV = @GNULIB_RECV@
+GNULIB_RECVFROM = @GNULIB_RECVFROM@
+GNULIB_REMOVE = @GNULIB_REMOVE@
+GNULIB_RENAME = @GNULIB_RENAME@
+GNULIB_RENAMEAT = @GNULIB_RENAMEAT@
+GNULIB_REWINDDIR = @GNULIB_REWINDDIR@
+GNULIB_RMDIR = @GNULIB_RMDIR@
+GNULIB_RPMATCH = @GNULIB_RPMATCH@
+GNULIB_SCANDIR = @GNULIB_SCANDIR@
+GNULIB_SCANF = @GNULIB_SCANF@
+GNULIB_SECURE_GETENV = @GNULIB_SECURE_GETENV@
+GNULIB_SELECT = @GNULIB_SELECT@
+GNULIB_SEND = @GNULIB_SEND@
+GNULIB_SENDTO = @GNULIB_SENDTO@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
+GNULIB_SETLOCALE = @GNULIB_SETLOCALE@
+GNULIB_SETLOCALE_NULL = @GNULIB_SETLOCALE_NULL@
+GNULIB_SETSOCKOPT = @GNULIB_SETSOCKOPT@
+GNULIB_SHUTDOWN = @GNULIB_SHUTDOWN@
+GNULIB_SIGACTION = @GNULIB_SIGACTION@
+GNULIB_SIGNAL_H_SIGPIPE = @GNULIB_SIGNAL_H_SIGPIPE@
+GNULIB_SIGPROCMASK = @GNULIB_SIGPROCMASK@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SOCKET = @GNULIB_SOCKET@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STAT = @GNULIB_STAT@
+GNULIB_STDIO_H_NONBLOCKING = @GNULIB_STDIO_H_NONBLOCKING@
+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
+GNULIB_STRFTIME = @GNULIB_STRFTIME@
+GNULIB_STRNCAT = @GNULIB_STRNCAT@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRPTIME = @GNULIB_STRPTIME@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOD = @GNULIB_STRTOD@
+GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_STRTOLD = @GNULIB_STRTOLD@
+GNULIB_STRTOLL = @GNULIB_STRTOLL@
+GNULIB_STRTOULL = @GNULIB_STRTOULL@
+GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@
+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
+GNULIB_SYMLINK = @GNULIB_SYMLINK@
+GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
+GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
+GNULIB_TIMEGM = @GNULIB_TIMEGM@
+GNULIB_TIME_R = @GNULIB_TIME_R@
+GNULIB_TIME_RZ = @GNULIB_TIME_RZ@
+GNULIB_TMPFILE = @GNULIB_TMPFILE@
+GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
+GNULIB_TRUNCATE = @GNULIB_TRUNCATE@
+GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
+GNULIB_TZSET = @GNULIB_TZSET@
+GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
+GNULIB_UNLINK = @GNULIB_UNLINK@
+GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
+GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_USLEEP = @GNULIB_USLEEP@
+GNULIB_UTIME = @GNULIB_UTIME@
+GNULIB_UTIMENSAT = @GNULIB_UTIMENSAT@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VFSCANF = @GNULIB_VFSCANF@
+GNULIB_VPRINTF = @GNULIB_VPRINTF@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSCANF = @GNULIB_VSCANF@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WCPCPY = @GNULIB_WCPCPY@
+GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
+GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
+GNULIB_WCSCAT = @GNULIB_WCSCAT@
+GNULIB_WCSCHR = @GNULIB_WCSCHR@
+GNULIB_WCSCMP = @GNULIB_WCSCMP@
+GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
+GNULIB_WCSCPY = @GNULIB_WCSCPY@
+GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
+GNULIB_WCSDUP = @GNULIB_WCSDUP@
+GNULIB_WCSFTIME = @GNULIB_WCSFTIME@
+GNULIB_WCSLEN = @GNULIB_WCSLEN@
+GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
+GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
+GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
+GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
+GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
+GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
+GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
+GNULIB_WCSSPN = @GNULIB_WCSSPN@
+GNULIB_WCSSTR = @GNULIB_WCSSTR@
+GNULIB_WCSTOK = @GNULIB_WCSTOK@
+GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
+GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
+GNULIB_WCTOB = @GNULIB_WCTOB@
+GNULIB_WCTOMB = @GNULIB_WCTOMB@
+GNULIB_WCTRANS = @GNULIB_WCTRANS@
+GNULIB_WCTYPE = @GNULIB_WCTYPE@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
+GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
+GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
+GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
+GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
+GNULIB_WMEMPCPY = @GNULIB_WMEMPCPY@
+GNULIB_WMEMSET = @GNULIB_WMEMSET@
+GNULIB_WRITE = @GNULIB_WRITE@
+GNULIB__EXIT = @GNULIB__EXIT@
+GREP = @GREP@
+HAVE_ACCEPT4 = @HAVE_ACCEPT4@
+HAVE_ALLOCA_H = @HAVE_ALLOCA_H@
+HAVE_ALPHASORT = @HAVE_ALPHASORT@
+HAVE_ATOLL = @HAVE_ATOLL@
+HAVE_BTOWC = @HAVE_BTOWC@
+HAVE_C99_STDINT_H = @HAVE_C99_STDINT_H@
+HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
+HAVE_CHOWN = @HAVE_CHOWN@
+HAVE_CLOSEDIR = @HAVE_CLOSEDIR@
+HAVE_COPY_FILE_RANGE = @HAVE_COPY_FILE_RANGE@
+HAVE_CRTDEFS_H = @HAVE_CRTDEFS_H@
+HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
+HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
+HAVE_DECL_FDOPENDIR = @HAVE_DECL_FDOPENDIR@
+HAVE_DECL_FPURGE = @HAVE_DECL_FPURGE@
+HAVE_DECL_FSEEKO = @HAVE_DECL_FSEEKO@
+HAVE_DECL_FTELLO = @HAVE_DECL_FTELLO@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
+HAVE_DECL_GETLOGIN = @HAVE_DECL_GETLOGIN@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
+HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
+HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
+HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
+HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
+HAVE_DECL_INITSTATE = @HAVE_DECL_INITSTATE@
+HAVE_DECL_LOCALTIME_R = @HAVE_DECL_LOCALTIME_R@
+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
+HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
+HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
+HAVE_DECL_SETSTATE = @HAVE_DECL_SETSTATE@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
+HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
+HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
+HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
+HAVE_DECL_TRUNCATE = @HAVE_DECL_TRUNCATE@
+HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
+HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DIRENT_H = @HAVE_DIRENT_H@
+HAVE_DPRINTF = @HAVE_DPRINTF@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_DUP3 = @HAVE_DUP3@
+HAVE_DUPLOCALE = @HAVE_DUPLOCALE@
+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
+HAVE_EXPLICIT_BZERO = @HAVE_EXPLICIT_BZERO@
+HAVE_FACCESSAT = @HAVE_FACCESSAT@
+HAVE_FCHDIR = @HAVE_FCHDIR@
+HAVE_FCHMODAT = @HAVE_FCHMODAT@
+HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
+HAVE_FCNTL = @HAVE_FCNTL@
+HAVE_FDATASYNC = @HAVE_FDATASYNC@
+HAVE_FDOPENDIR = @HAVE_FDOPENDIR@
+HAVE_FEATURES_H = @HAVE_FEATURES_H@
+HAVE_FFS = @HAVE_FFS@
+HAVE_FFSL = @HAVE_FFSL@
+HAVE_FFSLL = @HAVE_FFSLL@
+HAVE_FLOCK = @HAVE_FLOCK@
+HAVE_FNMATCH = @HAVE_FNMATCH@
+HAVE_FNMATCH_H = @HAVE_FNMATCH_H@
+HAVE_FREELOCALE = @HAVE_FREELOCALE@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FSTATAT = @HAVE_FSTATAT@
+HAVE_FSYNC = @HAVE_FSYNC@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_FUTIMENS = @HAVE_FUTIMENS@
+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
+HAVE_GETENTROPY = @HAVE_GETENTROPY@
+HAVE_GETGROUPS = @HAVE_GETGROUPS@
+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
+HAVE_GETLOGIN = @HAVE_GETLOGIN@
+HAVE_GETOPT_H = @HAVE_GETOPT_H@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETPASS = @HAVE_GETPASS@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GETTIMEOFDAY = @HAVE_GETTIMEOFDAY@
+HAVE_GLOB = @HAVE_GLOB@
+HAVE_GLOB_H = @HAVE_GLOB_H@
+HAVE_GLOB_PATTERN_P = @HAVE_GLOB_PATTERN_P@
+HAVE_GRANTPT = @HAVE_GRANTPT@
+HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
+HAVE_IMAXDIV_T = @HAVE_IMAXDIV_T@
+HAVE_INITSTATE = @HAVE_INITSTATE@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_ISBLANK = @HAVE_ISBLANK@
+HAVE_ISWBLANK = @HAVE_ISWBLANK@
+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
+HAVE_LANGINFO_ALTMON = @HAVE_LANGINFO_ALTMON@
+HAVE_LANGINFO_CODESET = @HAVE_LANGINFO_CODESET@
+HAVE_LANGINFO_ERA = @HAVE_LANGINFO_ERA@
+HAVE_LANGINFO_H = @HAVE_LANGINFO_H@
+HAVE_LANGINFO_T_FMT_AMPM = @HAVE_LANGINFO_T_FMT_AMPM@
+HAVE_LANGINFO_YESEXPR = @HAVE_LANGINFO_YESEXPR@
+HAVE_LCHMOD = @HAVE_LCHMOD@
+HAVE_LCHOWN = @HAVE_LCHOWN@
+HAVE_LINK = @HAVE_LINK@
+HAVE_LINKAT = @HAVE_LINKAT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MAX_ALIGN_T = @HAVE_MAX_ALIGN_T@
+HAVE_MBRLEN = @HAVE_MBRLEN@
+HAVE_MBRTOWC = @HAVE_MBRTOWC@
+HAVE_MBSINIT = @HAVE_MBSINIT@
+HAVE_MBSLEN = @HAVE_MBSLEN@
+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
+HAVE_MBTOWC = @HAVE_MBTOWC@
+HAVE_MEMCHR = @HAVE_MEMCHR@
+HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDIRAT = @HAVE_MKDIRAT@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_MKFIFO = @HAVE_MKFIFO@
+HAVE_MKFIFOAT = @HAVE_MKFIFOAT@
+HAVE_MKNOD = @HAVE_MKNOD@
+HAVE_MKNODAT = @HAVE_MKNODAT@
+HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
+HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
+HAVE_MKSTEMP = @HAVE_MKSTEMP@
+HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
+HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
+HAVE_NANOSLEEP = @HAVE_NANOSLEEP@
+HAVE_NEWLOCALE = @HAVE_NEWLOCALE@
+HAVE_NL_LANGINFO = @HAVE_NL_LANGINFO@
+HAVE_OPENAT = @HAVE_OPENAT@
+HAVE_OPENDIR = @HAVE_OPENDIR@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_PCLOSE = @HAVE_PCLOSE@
+HAVE_PIPE = @HAVE_PIPE@
+HAVE_PIPE2 = @HAVE_PIPE2@
+HAVE_POPEN = @HAVE_POPEN@
+HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
+HAVE_POSIX_SIGNALBLOCKING = @HAVE_POSIX_SIGNALBLOCKING@
+HAVE_PREAD = @HAVE_PREAD@
+HAVE_PSELECT = @HAVE_PSELECT@
+HAVE_PTHREAD_SIGMASK = @HAVE_PTHREAD_SIGMASK@
+HAVE_PTSNAME = @HAVE_PTSNAME@
+HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
+HAVE_PWRITE = @HAVE_PWRITE@
+HAVE_QSORT_R = @HAVE_QSORT_R@
+HAVE_RAISE = @HAVE_RAISE@
+HAVE_RANDOM = @HAVE_RANDOM@
+HAVE_RANDOM_H = @HAVE_RANDOM_H@
+HAVE_RANDOM_R = @HAVE_RANDOM_R@
+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
+HAVE_READDIR = @HAVE_READDIR@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_READLINKAT = @HAVE_READLINKAT@
+HAVE_REALLOCARRAY = @HAVE_REALLOCARRAY@
+HAVE_REALPATH = @HAVE_REALPATH@
+HAVE_RENAMEAT = @HAVE_RENAMEAT@
+HAVE_REWINDDIR = @HAVE_REWINDDIR@
+HAVE_RPMATCH = @HAVE_RPMATCH@
+HAVE_SA_FAMILY_T = @HAVE_SA_FAMILY_T@
+HAVE_SCANDIR = @HAVE_SCANDIR@
+HAVE_SECURE_GETENV = @HAVE_SECURE_GETENV@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
+HAVE_SETSTATE = @HAVE_SETSTATE@
+HAVE_SIGACTION = @HAVE_SIGACTION@
+HAVE_SIGHANDLER_T = @HAVE_SIGHANDLER_T@
+HAVE_SIGINFO_T = @HAVE_SIGINFO_T@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SIGSET_T = @HAVE_SIGSET_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
+HAVE_STPCPY = @HAVE_STPCPY@
+HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASECMP = @HAVE_STRCASECMP@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
+HAVE_STRINGS_H = @HAVE_STRINGS_H@
+HAVE_STRPBRK = @HAVE_STRPBRK@
+HAVE_STRPTIME = @HAVE_STRPTIME@
+HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRTOD = @HAVE_STRTOD@
+HAVE_STRTOLD = @HAVE_STRTOLD@
+HAVE_STRTOLL = @HAVE_STRTOLL@
+HAVE_STRTOULL = @HAVE_STRTOULL@
+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
+HAVE_STRUCT_SIGACTION_SA_SIGACTION = @HAVE_STRUCT_SIGACTION_SA_SIGACTION@
+HAVE_STRUCT_SOCKADDR_STORAGE = @HAVE_STRUCT_SOCKADDR_STORAGE@
+HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY = @HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
+HAVE_SYMLINK = @HAVE_SYMLINK@
+HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
+HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_CDEFS_H = @HAVE_SYS_CDEFS_H@
+HAVE_SYS_FILE_H = @HAVE_SYS_FILE_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_IOCTL_H = @HAVE_SYS_IOCTL_H@
+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_SELECT_H = @HAVE_SYS_SELECT_H@
+HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_SYS_UIO_H = @HAVE_SYS_UIO_H@
+HAVE_TIMEGM = @HAVE_TIMEGM@
+HAVE_TIMEZONE_T = @HAVE_TIMEZONE_T@
+HAVE_TYPE_VOLATILE_SIG_ATOMIC_T = @HAVE_TYPE_VOLATILE_SIG_ATOMIC_T@
+HAVE_TZSET = @HAVE_TZSET@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNLINKAT = @HAVE_UNLINKAT@
+HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
+HAVE_USLEEP = @HAVE_USLEEP@
+HAVE_UTIME = @HAVE_UTIME@
+HAVE_UTIMENSAT = @HAVE_UTIMENSAT@
+HAVE_UTIME_H = @HAVE_UTIME_H@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
+HAVE_VDPRINTF = @HAVE_VDPRINTF@
+HAVE_VISIBILITY = @HAVE_VISIBILITY@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WCHAR_T = @HAVE_WCHAR_T@
+HAVE_WCPCPY = @HAVE_WCPCPY@
+HAVE_WCPNCPY = @HAVE_WCPNCPY@
+HAVE_WCRTOMB = @HAVE_WCRTOMB@
+HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
+HAVE_WCSCAT = @HAVE_WCSCAT@
+HAVE_WCSCHR = @HAVE_WCSCHR@
+HAVE_WCSCMP = @HAVE_WCSCMP@
+HAVE_WCSCOLL = @HAVE_WCSCOLL@
+HAVE_WCSCPY = @HAVE_WCSCPY@
+HAVE_WCSCSPN = @HAVE_WCSCSPN@
+HAVE_WCSDUP = @HAVE_WCSDUP@
+HAVE_WCSFTIME = @HAVE_WCSFTIME@
+HAVE_WCSLEN = @HAVE_WCSLEN@
+HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
+HAVE_WCSNCAT = @HAVE_WCSNCAT@
+HAVE_WCSNCMP = @HAVE_WCSNCMP@
+HAVE_WCSNCPY = @HAVE_WCSNCPY@
+HAVE_WCSNLEN = @HAVE_WCSNLEN@
+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
+HAVE_WCSPBRK = @HAVE_WCSPBRK@
+HAVE_WCSRCHR = @HAVE_WCSRCHR@
+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
+HAVE_WCSSPN = @HAVE_WCSSPN@
+HAVE_WCSSTR = @HAVE_WCSSTR@
+HAVE_WCSTOK = @HAVE_WCSTOK@
+HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
+HAVE_WCSXFRM = @HAVE_WCSXFRM@
+HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
+HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
+HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
+HAVE_WINT_T = @HAVE_WINT_T@
+HAVE_WMEMCHR = @HAVE_WMEMCHR@
+HAVE_WMEMCMP = @HAVE_WMEMCMP@
+HAVE_WMEMCPY = @HAVE_WMEMCPY@
+HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
+HAVE_WMEMPCPY = @HAVE_WMEMPCPY@
+HAVE_WMEMSET = @HAVE_WMEMSET@
+HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
+HAVE_XLOCALE_H = @HAVE_XLOCALE_H@
+HAVE__BOOL = @HAVE__BOOL@
+HAVE__EXIT = @HAVE__EXIT@
+IGNORE_UNUSED_LIBRARIES_CFLAGS = @IGNORE_UNUSED_LIBRARIES_CFLAGS@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
+INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBCOMPRESS = @LIBCOMPRESS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBMULTITHREAD = @LIBMULTITHREAD@
+LIBOBJS = @LIBOBJS@
+LIBPMULTITHREAD = @LIBPMULTITHREAD@
+LIBPTHREAD = @LIBPTHREAD@
+LIBS = @LIBS@
+LIBSOCKET = @LIBSOCKET@
+LIBSTDTHREAD = @LIBSTDTHREAD@
+LIBTHREAD = @LIBTHREAD@
+LIBTOOL = @LIBTOOL@
+LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
+LIB_GETLOGIN = @LIB_GETLOGIN@
+LIB_HARD_LOCALE = @LIB_HARD_LOCALE@
+LIB_MBRTOWC = @LIB_MBRTOWC@
+LIB_NANOSLEEP = @LIB_NANOSLEEP@
+LIB_NL_LANGINFO = @LIB_NL_LANGINFO@
+LIB_SCHED_YIELD = @LIB_SCHED_YIELD@
+LIB_SELECT = @LIB_SELECT@
+LIB_SETLOCALE_NULL = @LIB_SETLOCALE_NULL@
+LIMITS_H = @LIMITS_H@
+LINGUAS = @LINGUAS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
+LOCALE_FR = @LOCALE_FR@
+LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
+LOCALE_JA = @LOCALE_JA@
+LOCALE_ZH_CN = @LOCALE_ZH_CN@
+LTALLOCA = @LTALLOCA@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
+LTLIBOBJS = @LTLIBOBJS@
+LTLIBTHREAD = @LTLIBTHREAD@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANDIR_LAYOUT = @MANDIR_LAYOUT@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MAN_SUBDIRS = @MAN_SUBDIRS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEXT_AS_FIRST_DIRECTIVE_CTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_CTYPE_H@
+NEXT_AS_FIRST_DIRECTIVE_DIRENT_H = @NEXT_AS_FIRST_DIRECTIVE_DIRENT_H@
+NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
+NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = @NEXT_AS_FIRST_DIRECTIVE_FCNTL_H@
+NEXT_AS_FIRST_DIRECTIVE_FLOAT_H = @NEXT_AS_FIRST_DIRECTIVE_FLOAT_H@
+NEXT_AS_FIRST_DIRECTIVE_FNMATCH_H = @NEXT_AS_FIRST_DIRECTIVE_FNMATCH_H@
+NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
+NEXT_AS_FIRST_DIRECTIVE_GLOB_H = @NEXT_AS_FIRST_DIRECTIVE_GLOB_H@
+NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@
+NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = @NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H@
+NEXT_AS_FIRST_DIRECTIVE_LIMITS_H = @NEXT_AS_FIRST_DIRECTIVE_LIMITS_H@
+NEXT_AS_FIRST_DIRECTIVE_LOCALE_H = @NEXT_AS_FIRST_DIRECTIVE_LOCALE_H@
+NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H = @NEXT_AS_FIRST_DIRECTIVE_SIGNAL_H@
+NEXT_AS_FIRST_DIRECTIVE_STDARG_H = @NEXT_AS_FIRST_DIRECTIVE_STDARG_H@
+NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
+NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@
+NEXT_AS_FIRST_DIRECTIVE_STDIO_H = @NEXT_AS_FIRST_DIRECTIVE_STDIO_H@
+NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
+NEXT_AS_FIRST_DIRECTIVE_STRINGS_H = @NEXT_AS_FIRST_DIRECTIVE_STRINGS_H@
+NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
+NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H = @NEXT_AS_FIRST_DIRECTIVE_SYSEXITS_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_FILE_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_FILE_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_IOCTL_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_SELECT_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_SOCKET_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H@
+NEXT_AS_FIRST_DIRECTIVE_SYS_UIO_H = @NEXT_AS_FIRST_DIRECTIVE_SYS_UIO_H@
+NEXT_AS_FIRST_DIRECTIVE_TIME_H = @NEXT_AS_FIRST_DIRECTIVE_TIME_H@
+NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
+NEXT_AS_FIRST_DIRECTIVE_UTIME_H = @NEXT_AS_FIRST_DIRECTIVE_UTIME_H@
+NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
+NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
+NEXT_CTYPE_H = @NEXT_CTYPE_H@
+NEXT_DIRENT_H = @NEXT_DIRENT_H@
+NEXT_ERRNO_H = @NEXT_ERRNO_H@
+NEXT_FCNTL_H = @NEXT_FCNTL_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_FNMATCH_H = @NEXT_FNMATCH_H@
+NEXT_GETOPT_H = @NEXT_GETOPT_H@
+NEXT_GLOB_H = @NEXT_GLOB_H@
+NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
+NEXT_LANGINFO_H = @NEXT_LANGINFO_H@
+NEXT_LIMITS_H = @NEXT_LIMITS_H@
+NEXT_LOCALE_H = @NEXT_LOCALE_H@
+NEXT_SIGNAL_H = @NEXT_SIGNAL_H@
+NEXT_STDARG_H = @NEXT_STDARG_H@
+NEXT_STDDEF_H = @NEXT_STDDEF_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRINGS_H = @NEXT_STRINGS_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
+NEXT_SYS_FILE_H = @NEXT_SYS_FILE_H@
+NEXT_SYS_IOCTL_H = @NEXT_SYS_IOCTL_H@
+NEXT_SYS_SELECT_H = @NEXT_SYS_SELECT_H@
+NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_SYS_TYPES_H = @NEXT_SYS_TYPES_H@
+NEXT_SYS_UIO_H = @NEXT_SYS_UIO_H@
+NEXT_TIME_H = @NEXT_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_UTIME_H = @NEXT_UTIME_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POSUB = @POSUB@
+PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
+PRIPTR_PREFIX = @PRIPTR_PREFIX@
+PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
+PTHREAD_H_DEFINES_STRUCT_TIMESPEC = @PTHREAD_H_DEFINES_STRUCT_TIMESPEC@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
+RANLIB = @RANLIB@
+REPLACE_ACCESS = @REPLACE_ACCESS@
+REPLACE_BTOWC = @REPLACE_BTOWC@
+REPLACE_CALLOC = @REPLACE_CALLOC@
+REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_CLOSE = @REPLACE_CLOSE@
+REPLACE_CLOSEDIR = @REPLACE_CLOSEDIR@
+REPLACE_CREAT = @REPLACE_CREAT@
+REPLACE_CTIME = @REPLACE_CTIME@
+REPLACE_DIRFD = @REPLACE_DIRFD@
+REPLACE_DPRINTF = @REPLACE_DPRINTF@
+REPLACE_DUP = @REPLACE_DUP@
+REPLACE_DUP2 = @REPLACE_DUP2@
+REPLACE_DUPLOCALE = @REPLACE_DUPLOCALE@
+REPLACE_FACCESSAT = @REPLACE_FACCESSAT@
+REPLACE_FCHMODAT = @REPLACE_FCHMODAT@
+REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
+REPLACE_FCLOSE = @REPLACE_FCLOSE@
+REPLACE_FCNTL = @REPLACE_FCNTL@
+REPLACE_FDOPEN = @REPLACE_FDOPEN@
+REPLACE_FDOPENDIR = @REPLACE_FDOPENDIR@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FNMATCH = @REPLACE_FNMATCH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FPURGE = @REPLACE_FPURGE@
+REPLACE_FREELOCALE = @REPLACE_FREELOCALE@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FSTAT = @REPLACE_FSTAT@
+REPLACE_FSTATAT = @REPLACE_FSTATAT@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_FTRUNCATE = @REPLACE_FTRUNCATE@
+REPLACE_FUTIMENS = @REPLACE_FUTIMENS@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETDELIM = @REPLACE_GETDELIM@
+REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
+REPLACE_GETDTABLESIZE = @REPLACE_GETDTABLESIZE@
+REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETPASS = @REPLACE_GETPASS@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_GLOB = @REPLACE_GLOB@
+REPLACE_GLOB_PATTERN_P = @REPLACE_GLOB_PATTERN_P@
+REPLACE_GMTIME = @REPLACE_GMTIME@
+REPLACE_INITSTATE = @REPLACE_INITSTATE@
+REPLACE_IOCTL = @REPLACE_IOCTL@
+REPLACE_ISATTY = @REPLACE_ISATTY@
+REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
+REPLACE_ISWDIGIT = @REPLACE_ISWDIGIT@
+REPLACE_ISWXDIGIT = @REPLACE_ISWXDIGIT@
+REPLACE_ITOLD = @REPLACE_ITOLD@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LINK = @REPLACE_LINK@
+REPLACE_LINKAT = @REPLACE_LINKAT@
+REPLACE_LOCALECONV = @REPLACE_LOCALECONV@
+REPLACE_LOCALTIME = @REPLACE_LOCALTIME@
+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_LSTAT = @REPLACE_LSTAT@
+REPLACE_MALLOC = @REPLACE_MALLOC@
+REPLACE_MBRLEN = @REPLACE_MBRLEN@
+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
+REPLACE_MBSINIT = @REPLACE_MBSINIT@
+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
+REPLACE_MBTOWC = @REPLACE_MBTOWC@
+REPLACE_MEMCHR = @REPLACE_MEMCHR@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKDIR = @REPLACE_MKDIR@
+REPLACE_MKFIFO = @REPLACE_MKFIFO@
+REPLACE_MKNOD = @REPLACE_MKNOD@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_MKTIME = @REPLACE_MKTIME@
+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
+REPLACE_NEWLOCALE = @REPLACE_NEWLOCALE@
+REPLACE_NL_LANGINFO = @REPLACE_NL_LANGINFO@
+REPLACE_NULL = @REPLACE_NULL@
+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
+REPLACE_OPEN = @REPLACE_OPEN@
+REPLACE_OPENAT = @REPLACE_OPENAT@
+REPLACE_OPENDIR = @REPLACE_OPENDIR@
+REPLACE_PERROR = @REPLACE_PERROR@
+REPLACE_POPEN = @REPLACE_POPEN@
+REPLACE_PREAD = @REPLACE_PREAD@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PSELECT = @REPLACE_PSELECT@
+REPLACE_PTHREAD_SIGMASK = @REPLACE_PTHREAD_SIGMASK@
+REPLACE_PTSNAME = @REPLACE_PTSNAME@
+REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_PWRITE = @REPLACE_PWRITE@
+REPLACE_QSORT_R = @REPLACE_QSORT_R@
+REPLACE_RAISE = @REPLACE_RAISE@
+REPLACE_RANDOM = @REPLACE_RANDOM@
+REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
+REPLACE_READ = @REPLACE_READ@
+REPLACE_READLINK = @REPLACE_READLINK@
+REPLACE_READLINKAT = @REPLACE_READLINKAT@
+REPLACE_REALLOC = @REPLACE_REALLOC@
+REPLACE_REALPATH = @REPLACE_REALPATH@
+REPLACE_REMOVE = @REPLACE_REMOVE@
+REPLACE_RENAME = @REPLACE_RENAME@
+REPLACE_RENAMEAT = @REPLACE_RENAMEAT@
+REPLACE_RMDIR = @REPLACE_RMDIR@
+REPLACE_SELECT = @REPLACE_SELECT@
+REPLACE_SETENV = @REPLACE_SETENV@
+REPLACE_SETLOCALE = @REPLACE_SETLOCALE@
+REPLACE_SETSTATE = @REPLACE_SETSTATE@
+REPLACE_SLEEP = @REPLACE_SLEEP@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STAT = @REPLACE_STAT@
+REPLACE_STDIO_READ_FUNCS = @REPLACE_STDIO_READ_FUNCS@
+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
+REPLACE_STPNCPY = @REPLACE_STPNCPY@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
+REPLACE_STRDUP = @REPLACE_STRDUP@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
+REPLACE_STRFTIME = @REPLACE_STRFTIME@
+REPLACE_STRNCAT = @REPLACE_STRNCAT@
+REPLACE_STRNDUP = @REPLACE_STRNDUP@
+REPLACE_STRNLEN = @REPLACE_STRNLEN@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_STRTOD = @REPLACE_STRTOD@
+REPLACE_STRTOIMAX = @REPLACE_STRTOIMAX@
+REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
+REPLACE_STRTOLD = @REPLACE_STRTOLD@
+REPLACE_STRTOUMAX = @REPLACE_STRTOUMAX@
+REPLACE_STRUCT_LCONV = @REPLACE_STRUCT_LCONV@
+REPLACE_STRUCT_TIMEVAL = @REPLACE_STRUCT_TIMEVAL@
+REPLACE_SYMLINK = @REPLACE_SYMLINK@
+REPLACE_SYMLINKAT = @REPLACE_SYMLINKAT@
+REPLACE_TIMEGM = @REPLACE_TIMEGM@
+REPLACE_TMPFILE = @REPLACE_TMPFILE@
+REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
+REPLACE_TRUNCATE = @REPLACE_TRUNCATE@
+REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
+REPLACE_TZSET = @REPLACE_TZSET@
+REPLACE_UNLINK = @REPLACE_UNLINK@
+REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
+REPLACE_UNSETENV = @REPLACE_UNSETENV@
+REPLACE_USLEEP = @REPLACE_USLEEP@
+REPLACE_UTIME = @REPLACE_UTIME@
+REPLACE_UTIMENSAT = @REPLACE_UTIMENSAT@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
+REPLACE_WCSFTIME = @REPLACE_WCSFTIME@
+REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
+REPLACE_WCSTOK = @REPLACE_WCSTOK@
+REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
+REPLACE_WCTOB = @REPLACE_WCTOB@
+REPLACE_WCTOMB = @REPLACE_WCTOMB@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
+REPLACE_WRITE = @REPLACE_WRITE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
+STDALIGN_H = @STDALIGN_H@
+STDARG_H = @STDARG_H@
+STDBOOL_H = @STDBOOL_H@
+STDDEF_H = @STDDEF_H@
+STDINT_H = @STDINT_H@
+STRIP = @STRIP@
+SYSEXITS_H = @SYSEXITS_H@
+SYS_IOCTL_H_HAVE_WINSOCK2_H = @SYS_IOCTL_H_HAVE_WINSOCK2_H@
+SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @SYS_IOCTL_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
+TBL_X_FORMAT = @TBL_X_FORMAT@
+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
+TRANS_APROPOS = @TRANS_APROPOS@
+TRANS_APROPOS_UPPER = @TRANS_APROPOS_UPPER@
+TRANS_CATMAN = @TRANS_CATMAN@
+TRANS_CATMAN_UPPER = @TRANS_CATMAN_UPPER@
+TRANS_LEXGROG = @TRANS_LEXGROG@
+TRANS_LEXGROG_UPPER = @TRANS_LEXGROG_UPPER@
+TRANS_MAN = @TRANS_MAN@
+TRANS_MANCONV = @TRANS_MANCONV@
+TRANS_MANCONV_UPPER = @TRANS_MANCONV_UPPER@
+TRANS_MANDB = @TRANS_MANDB@
+TRANS_MANDB_UPPER = @TRANS_MANDB_UPPER@
+TRANS_MANPATH = @TRANS_MANPATH@
+TRANS_MANPATH_UPPER = @TRANS_MANPATH_UPPER@
+TRANS_MAN_RECODE = @TRANS_MAN_RECODE@
+TRANS_MAN_RECODE_UPPER = @TRANS_MAN_RECODE_UPPER@
+TRANS_MAN_UPPER = @TRANS_MAN_UPPER@
+TRANS_WHATIS = @TRANS_WHATIS@
+TRANS_WHATIS_UPPER = @TRANS_WHATIS_UPPER@
+TRANS_ZSOELIM = @TRANS_ZSOELIM@
+TRANS_ZSOELIM_UPPER = @TRANS_ZSOELIM_UPPER@
+TROFF = @TROFF@
+UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
+UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
+UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
+UNISTD_H_DEFINES_STRUCT_TIMESPEC = @UNISTD_H_DEFINES_STRUCT_TIMESPEC@
+UNISTD_H_HAVE_SYS_RANDOM_H = @UNISTD_H_HAVE_SYS_RANDOM_H@
+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
+UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
+USE_NLS = @USE_NLS@
+UTIME_H = @UTIME_H@
+VERSION = @VERSION@
+WARN_CFLAGS = @WARN_CFLAGS@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WINDOWS_64_BIT_OFF_T = @WINDOWS_64_BIT_OFF_T@
+WINDOWS_64_BIT_ST_SIZE = @WINDOWS_64_BIT_ST_SIZE@
+WINDOWS_STAT_INODES = @WINDOWS_STAT_INODES@
+WINDOWS_STAT_TIMESPEC = @WINDOWS_STAT_TIMESPEC@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+browser = @browser@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+bunzip2 = @bunzip2@
+bzip2 = @bzip2@
+cache_top_owner = @cache_top_owner@
+cat = @cat@
+col = @col@
+compress = @compress@
+compress_ext = @compress_ext@
+compressor = @compressor@
+config_file = @config_file@
+config_file_basename = @config_file_basename@
+config_file_dirname = @config_file_dirname@
+datadir = @datadir@
+datarootdir = @datarootdir@
+date = @date@
+docdir = @docdir@
+dvidir = @dvidir@
+eqn = @eqn@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
+gltests_WITNESS = @gltests_WITNESS@
+grap = @grap@
+grep = @grep@
+gunzip = @gunzip@
+gzip = @gzip@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libpipeline_CFLAGS = @libpipeline_CFLAGS@
+libpipeline_LIBS = @libpipeline_LIBS@
+libseccomp_CFLAGS = @libseccomp_CFLAGS@
+libseccomp_LIBS = @libseccomp_LIBS@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lzip = @lzip@
+lzma = @lzma@
+man_mode = @man_mode@
+man_owner = @man_owner@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+neqn = @neqn@
+nroff = @nroff@
+oldincludedir = @oldincludedir@
+override_dir = @override_dir@
+pager = @pager@
+pdfdir = @pdfdir@
+pic = @pic@
+preconv = @preconv@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+refer = @refer@
+roff_version = @roff_version@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sections = @sections@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+systemdsystemunitdir = @systemdsystemunitdir@
+systemdtmpfilesdir = @systemdtmpfilesdir@
+target_alias = @target_alias@
+tbl = @tbl@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+tr = @tr@
+troff = @troff@
+troff_as_troff_input = @troff_as_troff_input@
+uncompress = @uncompress@
+unlzip = @unlzip@
+unlzma = @unlzma@
+unxz = @unxz@
+unzstd = @unzstd@
+vgrind = @vgrind@
+xz = @xz@
+zstd = @zstd@
+ME_FILES = \
+	comp.me \
+	db.me \
+	files.me \
+	format.me \
+	glossary.me \
+	intro.me \
+	leader.me \
+	man_db.me \
+	misc.me \
+	sec.me
+
+MANUAL = man_db
+MANUAL_INSTALL = man-db-manual
+dist_noinst_DATA = \
+	README \
+	$(ME_FILES) \
+	options-only.me \
+	print-options
+
+@BUILD_MANUAL_TRUE@noinst_DATA = \
+@BUILD_MANUAL_TRUE@	$(MANUAL).cat \
+@BUILD_MANUAL_TRUE@	$(MANUAL).ps
+
+@BUILD_MANUAL_TRUE@CLEANFILES = \
+@BUILD_MANUAL_TRUE@	$(noinst_DATA) \
+@BUILD_MANUAL_TRUE@	$(MANUAL).dvi \
+@BUILD_MANUAL_TRUE@	$(MANUAL).html \
+@BUILD_MANUAL_TRUE@	$(MANUAL).pp \
+@BUILD_MANUAL_TRUE@	$(MANUAL).tdvi \
+@BUILD_MANUAL_TRUE@	$(MANUAL).tps \
+@BUILD_MANUAL_TRUE@	version
+
+@BUILD_MANUAL_TRUE@SOELIM = soelim
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cat .dvi .html .pp .ps .tdvi .tps
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign manual/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign manual/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+@BUILD_MANUAL_FALSE@html-local:
+@BUILD_MANUAL_FALSE@clean-local:
+@BUILD_MANUAL_FALSE@dvi-local:
+@BUILD_MANUAL_FALSE@ps-local:
+@BUILD_MANUAL_FALSE@install-data-hook:
+@BUILD_MANUAL_FALSE@uninstall-hook:
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: dvi-local
+
+html: html-am
+
+html-am: html-local
+
+info: info-am
+
+info-am:
+
+install-data-am:
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am: ps-local
+
+uninstall-am:
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+.MAKE: install-am install-data-am install-strip uninstall-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	clean-local cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am dvi-local html html-am \
+	html-local info info-am install install-am install-data \
+	install-data-am install-data-hook install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am ps-local tags-am \
+	uninstall uninstall-am uninstall-hook
+
+.PRECIOUS: Makefile
+
+
+@BUILD_MANUAL_TRUE@version: $(top_srcdir)/configure.ac
+@BUILD_MANUAL_TRUE@	echo '.ds V $(roff_version)' > $@
+
+@BUILD_MANUAL_TRUE@$(MANUAL).pp: $(ME_FILES) version
+@BUILD_MANUAL_TRUE@	$(SOELIM) -I$(srcdir) man_db.me | tbl > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.pp.dvi:
+@BUILD_MANUAL_TRUE@	$(TROFF) -me -Tdvi $< > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.pp.ps:
+@BUILD_MANUAL_TRUE@	$(TROFF) -me -Tps $< > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.pp.tdvi:
+@BUILD_MANUAL_TRUE@	$(TROFF) -me -Tdvi $< | grodvi -d > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.tdvi.tps:
+@BUILD_MANUAL_TRUE@	dvips -f -t a4 $< > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.pp.cat:
+@BUILD_MANUAL_TRUE@	LC_ALL=C nroff -me $< > $@.new && mv -f $@.new $@
+
+@BUILD_MANUAL_TRUE@.pp.html:
+@BUILD_MANUAL_TRUE@	$(TROFF) -me -Thtml -P-I$* $< > $@.new && mv -f $@.new $@
+
+# Automake defines these targets already, so we need to use -local.
+@BUILD_MANUAL_TRUE@dvi-local: $(MANUAL).dvi
+@BUILD_MANUAL_TRUE@ps-local: $(MANUAL).ps
+@BUILD_MANUAL_TRUE@html-local: $(MANUAL).html
+
+# These are all ours.
+@BUILD_MANUAL_TRUE@cat: $(MANUAL).cat
+@BUILD_MANUAL_TRUE@tps: $(MANUAL).tps
+
+@BUILD_MANUAL_TRUE@clean-local:
+@BUILD_MANUAL_TRUE@	-rm -f $(MANUAL)-*.png
+
+@BUILD_MANUAL_TRUE@install-data-hook:
+@BUILD_MANUAL_TRUE@	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+@BUILD_MANUAL_TRUE@	@if test -f $(MANUAL).cat; then \
+@BUILD_MANUAL_TRUE@		echo " $(INSTALL_DATA) $(MANUAL).cat '$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).txt'"; \
+@BUILD_MANUAL_TRUE@		$(INSTALL_DATA) $(MANUAL).cat "$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).txt" || exit $$?; \
+@BUILD_MANUAL_TRUE@	fi
+@BUILD_MANUAL_TRUE@	@if test -f $(MANUAL).ps; then \
+@BUILD_MANUAL_TRUE@		echo " $(INSTALL_DATA) $(MANUAL).ps '$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).ps'"; \
+@BUILD_MANUAL_TRUE@		$(INSTALL_DATA) $(MANUAL).ps "$(DESTDIR)$(docdir)/$(MANUAL_INSTALL).ps" || exit $$?; \
+@BUILD_MANUAL_TRUE@	fi
+
+@BUILD_MANUAL_TRUE@uninstall-hook:
+@BUILD_MANUAL_TRUE@	rm -rf "$(DESTDIR)$(docdir)"
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/manual/README b/manual/README
new file mode 100644
index 0000000..87efe80
--- /dev/null
+++ b/manual/README
@@ -0,0 +1,23 @@
+This directory contains the man-db manual sources.  They may be compiled into
+five different formats:
+
+	dvi:	device independent
+	ps:	PostScript
+	cat:	vt100-type terminal ie. ASCII with overstrike
+	tps:	PostScript with TeX fonts
+	html:	HyperText Markup Language
+
+All require soelim, tbl and the ROFF macro `e' (your site probably has it).
+cat requires nroff whereas the others require groff.  tps also requires an
+installation of TeX and dvips.  html requires a version of groff with the
+grohtml driver, and is currently disabled by default as the output is
+suboptimal.
+
+Issuing `make' or `make all' will produce the dvi, ps and cat versions.  To
+produce a single format simply run
+
+	make <format>
+or
+	make man_db.<format>
+
+where <format> can be any of the above.
diff --git a/manual/comp.me b/manual/comp.me
new file mode 100644
index 0000000..b9535f0
--- /dev/null
+++ b/manual/comp.me
@@ -0,0 +1,88 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002, 2007 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "Compression"
+.BS 2 "Compressed manual pages"
+.lp
+It is possible to maintain a system of compressed manual pages.
+This imposes a small overhead on the formatting process, but is nevertheless
+usually reasonable in order to avoid unnecessary consumption of disk space.
+.lp
+Presently, the compression extension/decompressor pairs must be known at
+compile time although any number may be defined and used.
+The following structure is predefined in \*M:
+
+.TS
+center box tab(@);
+l | l .
+Extension@Decompressor
+_
+gz@gzip \-dc
+z@gzip \-dc
+Z@compress \-dc
+.TE
+
+It is a relatively easy operation to include further pairs in this
+structure.
+See
+.i include/comp_src.h
+for details and an example.
+.lp
+Support for compressed manual pages is compiled into the \*M utilities by
+default, depending on the decompressors available at configure time.
+.BS 2 "Compressed cat pages"
+.lp
+\*M compresses cat files by default.
+During configuration,
+.b configure
+will try to find
+.b gzip
+and, if found, all cat files produced by
+.b man
+will be compressed with
+.ip
+.b "gzip \-7c"
+.lp
+and have a
+.b .gz
+extension appended.
+If
+.b gzip
+is not found,
+.ip
+.b "compress \-c"
+.lp
+is used as the compressor and the extension
+.b .Z
+is appended.
+.lp
+To store cat files in an uncompressed state and to disable compressed
+extension processing completely, edit
+.i config.h
+and comment out the following line
+.lp
+#define COMP_CAT 1
+.lp
+.BS 3 "Stray cats"
+.lp
+Normally,
+.b man
+will only look for cat files with the default compression extension.
+The default compression extension is dependent on the default compressor
+and may be an empty string if the support for compressed cats is disabled.
+.lp
+It is possible for a system to be supplied with stray cat files located in the
+traditional cat page hierarchy.
+To make matters worse, they may have
+compression extensions other than the default and reside on read-only media.
+In such circumstances, stray cat files will be accepted with any compression
+extension that is also supported for manual pages.
+.lp
+This special treatment of stray cat pages is removed if
+support for compressed manual pages is turned off or not available.
diff --git a/manual/db.me b/manual/db.me
new file mode 100644
index 0000000..ddd4727
--- /dev/null
+++ b/manual/db.me
@@ -0,0 +1,317 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "The index database caches"
+.lp
+As mentioned in the introduction, \*M uses database lookups to search for
+manual page locations and information.
+When performing a manual page lookup or a basic
+.b whatis
+search, the databases are searched in
+.ip
+.i "key \(-> content"
+.lp
+mode and are as fast as the underlying databases can be.
+When performing
+.b apropos
+or special
+.b whatis
+searches, the databases are searched in a linear way, which, although far
+more expensive than
+.i keyed
+lookup, is no worse than traditional text based file searching.
+.BS 2 "index database location"
+.lp
+The databases are always located at the root of the cat page hierarchy,
+whether this is the same as the manual page hierarchy or not.
+As file locking mechanisms are employed to ensure that concurrent
+processes do not update a database simultaneously, it is almost imperative
+that the databases reside on a local filesystem since file locking across
+NFS filesystems may be unavailable or flaky.
+To avoid such problems,
+.b man
+can be compiled without database maintenance support.
+See the section titled "Modes of operation" for details.
+.BS 3 "Manual hierarchies with no index database"
+.lp
+It is possible for the \*M utilities to operate without aid from an index
+database.
+Under such circumstances, search methods will use only file
+globbing and whatis type searches are performed on any traditional whatis
+text databases that may exist.
+Only the traditional cat hierarchy is searched for cat files.
+.BS 3 "User manual page hierarchies"
+.lp
+A user may have any number of personal manual page hierarchies listed in
+their
+.EV MANPATH\c
+.r .
+.r
+By default,
+.b man
+will maintain
+.b mandb
+created databases at the root of user manual page
+hierarchies.
+The definition of a user manual hierarchy is that it
+does not have an entry in the \*M configuration file.
+See
+.b manpath (5)
+for details.
+.BS 2 "Contents of an index database"
+.lp
+There are four kinds of entry in an index database.
+.np
+A direct entry regarding a particular manual page.
+Manual pages that are unique in terms of name use just a single entry
+in the database and can be looked up by simply using the name as the key.
+.np
+A common name index entry that lists the extensions of all of the manual
+pages sharing the common index entry name.
+Manual pages that share common names but have differing extensions each
+have a single database entry, but this time they are looked up with a key
+comprised of their name and their extension.
+The entire set of common named
+pages also has an common name index entry that informs of the extensions
+available.
+.np
+An indirect entry that has a pointer to the real entry.
+Manual pages that are whatis references to a particular page do not
+physically exist so they have a pointer to the entry containing the location
+of the real manual page.
+.np
+Special identification entries.
+There is one special key name,
+.q $version$
+that identifies the database storage scheme version.
+.lp
+In order to support looking up manual pages in a case-insensitive fashion,
+keys are stored in lower case.
+If the name of the page was not already in lower case, its true case is also
+stored in the common name index entry.
+.lp
+In the following entries, the character
+.q |
+will be used to separate the fields. In reality a tab is used.
+Direct and indirect entries takes the form:
+.ip
+.i "<name> \(-> <realname>|\:<ext>|\:<sec>|\:<mtime.sec>|\:<mtime.nsec>|\:<ID>|\:<ref>|\:<filter>|\:<comp>|\:<whatis>"
+.lp
+Common name index entries take the form:
+.ip
+.i "<name> \(-> |<realname1>|\:<ext1>|\:<realname2>|\:<ext2>|\:<realname3>|\:<ext3>| .\|.\|. <realnamen>|\:<extn>"
+.lp
+and common name direct or indirect entries take the form:
+.ip
+.i "<name>|<ext> \(-> <realname>|\:<ext>|\:<sec>|\:<mtime.sec>|\:<mtime.nsec>|\:\:<ID>|\:<ref>|\:<filter>|\:<comp>|\:<whatis>"
+.lp
+where in each case the filename being represented is formed as
+.ip
+.i <manual_hierarchy>/man<sec>/<name>.<ext>.<comp>
+.lp
+in the case of a manual page, or
+.ip
+.i <cat_hierarchy>/cat<sec>/<name>.<ext>.<comp>
+.lp
+in the case of a stray cat.
+.lp
+If any of the fields would be empty, a single
+.q \-
+is stored in its place.
+.i <comp>
+represents the compression extension,
+.i <mtime.sec>
+is an integer representing the seconds part of the last modification
+time of the manual page,
+.i <mtime.nsec>
+is an integer representing the nanoseconds part of the last modification
+time of the manual page,
+.i <ref>
+points to the entry containing the location of the real page,
+.i <ID>
+is one of the following identification letters, and
+.i <filter>
+represents any preprocessors that are needed to display the page.
+
+.TS
+center box tab (@);
+l | l | l .
+ID@#define@Description
+_
+A@ULT_MAN@ultimate manual page, the full source nroff file
+B@SO_MAN@manual page containing a .so request to an ULT_MAN
+C@WHATIS_MAN@virtual whatis referenced page pointing to an ULT_MAN
+D@STRAY_CAT@cat page with no source manual page
+E@WHATIS_CAT@virtual whatis referenced page pointing to a STRAY_CAT
+.TE
+
+The
+.i ID
+illustrates the precedence.
+Some types of manual page can be referenced by
+several means, e.g. .so requested and whatis referred.
+In such a case, only one reference must be stored in the database,
+the precedence level decides which.
+.BS 3 "Favouring stray cats"
+.lp
+With the above rules of precedence, it is possible for a valid stray cat page
+to be replaced by a whatis referred page sharing identical name-space.
+.lp
+If you would like to see the stray cat page
+.b kill (1)
+instead of the
+.b bash_builtins (1)
+page referenced by
+.b kill (1),
+edit
+.i include/manconfig.h
+and un-comment the following line
+.lp
+/* #define FAVOUR_STRAYCATS */
+.BS 3 "Accessdb"
+.lp
+A simple program,
+.b accessdb
+is included with \*M.
+It will output the data contained within a \*M
+database in a human readable form.
+By default, it will
+.i dump
+the data from
+.i /var/cache/man/index.<db-type> ,
+where
+.i <db-type>
+is dependent on the database library in use.
+.lp
+Supplying an argument to
+.b accessdb
+will override this default.
+Tabs are replaced in the output by a tilde
+.q ~
+in the
+.i key
+field and a single space in the
+.i content
+field.
+.BS 3 "Example database"
+.lp
+As an example of both
+.b accessdb
+and the database storage method, the output of
+.ip
+.bx "src/accessdb man/index.bt"
+.lp
+after first running
+.ip
+.bx "src/mandb man"
+.lp
+from the top level build directory is included below.
+.lp
+.nf
+$version$ -> "2.5.0"
+accessdb -> "- 8 8 1410381979 324541691 A - - - dumps the content of a man-db database in a human readable format"
+apropos -> "- 1 1 1410381979 268541692 A - - - search the manual page names and descriptions"
+catman -> "- 8 8 1410381979 328541691 A - - - create or update the pre-formatted manual pages"
+lexgrog -> "- 1 1 1410381979 268541692 A - - - parse header information in man pages"
+man -> "- 1 1 1410381979 280541692 A - t - an interface to the system reference manuals"
+manconv -> "- 1 1 1410381979 272541692 A - - - convert manual page from one encoding to another"
+mandb -> "- 8 8 1410381979 324541691 A - t - create or update the manual page index caches"
+manpath -> " manpath 5 manpath 1"
+manpath~1 -> "- 1 1 1410381979 300541691 A - - - determine search path for manual pages"
+manpath~5 -> "- 5 5 1410381979 304541691 A - - - format of the /etc/manpath.config file"
+whatis -> "- 1 1 1410381979 300541691 A - - - display one-line manual page descriptions"
+zsoelim -> "- 1 1 1410381979 304541691 A - - - satisfy .so requests in roff input"
+.fi
+.BS 2 "Database types"
+.lp
+\*M has support for various low level database libraries commonly in use
+today.
+The interfaces to the libraries are known as
+.bu
+ndbm (\*U)
+.bu
+gdbm (\*(GN)
+.bu
+btree (Berkeley DB)
+.lp
+\*M currently does not hold more than one database open at any time, so
+.bu
+dbm (\*U)
+.lp
+support could be added in the future.
+.BS 2 "Limitations"
+.lp
+The general differences and limitations are best compared in a table.
+
+.TS
+center box tab(@);
+c | c | c | c  s | c | c .
+Name@Type@File@Content memory@Concurrent@Shareable
+\^@\^@\^@_@\^@\^
+.T&
+c | c | c | c | c | c | c
+l | l | l | l | l | l | l . 
+\^@\^@name@type@limit@access@\^
+_
+ndbm@hash@index\**@static@1Kb@none@no
+gdbm@hash@index.db@dynamic@\-@file locking@no
+btree@binary tree@index.bt@static@\-@none@yes
+.TE
+
+.(f
+\** ndbm databases are physically represented by two files,
+.i index.dir
+and
+.i index.pag ,
+but are referred to simply as
+.i index
+by the interface routines.
+.)f
+Those types that have no built in concurrent access strategy are provided
+with
+.b flock (2)
+based file locking by \*M.
+.lp
+Berkeley DB initializes its databases very quickly, so
+.b btree
+may have some performance advantages when doing
+.b man
+searches.
+However, it is quite heavyweight and its library SONAME and on-disk formats
+have changed a number of times to provide features considerably beyond what
+\*M needs, so the preferred library interface is now
+.b gdbm .
+.b configure
+will look for
+.b gdbm ,
+.b btree
+and then finally
+.b ndbm
+routines when configuring \*M.
+.BS 2 "Sharing databases in a heterogeneous environment"
+It may be necessary or advantageous to share databases across
+platforms, regardless of the potential file locking problems.
+.lp
+An example would be a user having a personal manual page hierarchy in an NFS
+based home directory environment, whereby the home directory is held on and
+mounted from a single machine in a heterogeneous network.
+.lp
+In this context, the database cache will have the same name and reside in
+the same place on all machines.
+There are at least two ways to deal with this problem.
+.bu
+Hack the
+.i include/manconfig.h
+file on each platform to provide a unique database name for each system.
+No databases will be shared.
+.bu
+Install and use the Berkeley DB database interface library on each platform.
+These databases can be shared across big-endian/little-endian platforms
+although a database created on a big-endian platform will suffer a small
+access penalty when used by a litle-endian machine and vice-versa.
diff --git a/manual/files.me b/manual/files.me
new file mode 100644
index 0000000..cd19669
--- /dev/null
+++ b/manual/files.me
@@ -0,0 +1,518 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002, 2007 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "Filesystem structure"
+.BS 2 "Manual page hierarchies"
+.lp
+It is often common for manual page systems to have more than one manual page
+hierarchy.
+Indeed one of the systems I use has the following globally
+accessible hierarchies
+.ip
+.i
+/usr/man
+.br
+/usr/local/man
+.br
+/usr/local/tex/man
+.br
+/usr/local/pbm/man
+.br
+/usr/X11R6/man
+.br
+/usr/openwin/man
+.br
+/usr/local/packages/pvm/man
+.r
+.lp
+A full system
+.EV MANPATH
+would be a colon separated list of these directories.
+The order is important, and is observed by \*M's search algorithms.
+The order is very much related to the user's
+.EV PATH
+environment variable, and should be set on a per user basis, or not
+set at all.
+If a user's
+.EV PATH
+causes
+.ip
+.i /usr/local/packages/bin/foobar
+.lp
+to be executed in preference to
+.ip
+.i /usr/bin/foobar ,
+.lp
+it is essential that
+.ip
+.bx "man foobar"
+.lp
+displays the manual page located within
+.ip
+.i /usr/local/packages/man
+.lp
+rather than within
+.ip
+.i /usr/share/man
+.lp
+To ensure correct order, the program
+.b manpath
+may be used to set the
+.EV MANPATH
+environment variable.
+See
+.b manpath (1)
+and
+.b manpath (5)
+for details.
+.BS 2 "Setting the MANPATH"
+.lp
+If using a Bourne style login shell such as
+.b bash ,
+.b ksh ,
+or
+.b zsh ,
+the commands
+.ip
+export MANPATH
+.br
+MANPATH=`manpath \-q`
+.lp
+can be added to
+.b \s-1$HOME\s+1\c
+.i /.profile
+.lp
+If using a C style login shell such as
+.b csh
+or
+.b tcsh ,
+the commands
+.ip
+setenv MANPATH `manpath \-q`
+.lp
+can be added to
+.b \s-1$HOME\s+1\c
+.i /.login
+.lp
+N.B.
+.EV PATH
+must be set prior to using
+.b manpath .
+The setting of
+.EV MANPATH
+is actually unnecessary as the \*M utilities will dynamically determine the
+manpath if
+.EV MANPATH
+is unset.
+.BS 2 "Determination of the internal manpath"
+.lp
+All \*M utilities,
+.b manpath
+included, will use the user's
+.EV MANPATH
+environment variable if set and not equal to "".
+Otherwise the user's
+.EV PATH
+environment variable is queried.
+If this is unset or is set to "", the
+determined manpath will simply be any
+.ip
+.b MANDATORY_MANPATH
+.lp
+elements defined in the \*M config file.
+.lp
+Assuming that a
+.EV PATH
+exists, each path element it contains is scanned for in the config file.
+If found, the corresponding manpath element is appended to the internal
+manpath.
+However, if the element is not mentioned in the config file, a man directory
+relative to it will be sought.
+The subdirectories
+.i ../man ,
+.i man ,
+.i ../share/man ,
+or
+.i share/man
+relative to the path component are appended to the internal manpath if they
+exist.
+Finally, the internal manpath is stripped of duplicate paths before
+being processed by the
+.b NLS
+and \(oqOther OS\(cq routines.
+These may add to or modify the separate path
+elements giving priority to
+.b NLS
+manual pages or add OS-relative manpaths.
+.BS 2 "Other OS's manual pages"
+.lp
+It is common to have collections of heterogeneous computer systems linked
+together in a network.
+In some circumstances\**
+.(f
+\** writing portable software instantly comes to mind
+.)f
+it is advantageous to be able to access the manual
+pages of these other systems directly from your system.
+This feature is known as alternate system support.
+The accepted way to setup this support is to NFS mount the respective
+systems' manual page hierarchies under the native manual page hierarchies.
+An example:
+
+.TS
+center box tab(@);
+l | l.
+System@Manual page hierarchy
+_
+<local>@/usr/share/man
+newOS@/usr/share/man/newOS
+userix@/usr/share/man/userix
+<local>@/usr/local/man
+newOS@/usr/local/man/newOS
+userix@/usr/local/man/userix
+.TE
+
+Rather than have multiple NFS mounts from a single machine, this may be
+accomplished by NFS mounting
+.ip
+.i <other-sys>:/usr
+.lp
+somewhere on the local system and using symbolic links within the manual
+hierarchies.
+To access these
+.i "alternate systems"
+using
+.b man
+use the
+.b \-m
+or
+.b \-\-systems
+option, eg.
+.ip
+.bx "man \-\-all\ \-\-systems userix:newOS 5 passwd"
+.lp
+would provide manual pages showing the structure of
+.i /etc/passwd
+on systems
+.b userix
+and
+.b newOS
+in that order.
+A manual page would
+.i not
+be displayed about the local systems conventions.
+Please read the relevant \*M utility's manual
+page for further and more specific information.
+.BS 2 "NLS manual pages"
+.lp
+.\"With appropriate font support, it is possible to access and display
+.\".q "Native Language Support"
+.\"manual pages.
+.\".lp
+NLS manual pages should be installed in NLS subdirectories of a standard
+manual page hierarchy.
+The subdirectory names should be made up of language, territory, and
+character set components as necessary to specify the locale of the manual
+page.
+.lp
+The character set component describes the encoding of the manual page
+itself, and not the encoding in use by the user; a manual page installed
+under the
+.b fr.UTF-8
+subdirectory will be used in the
+.b fr_FR.ISO-8859-1
+locale as well as
+.b fr_FR.UTF-8 ,
+and converted between encodings as necessary.
+If no character set is specified in the subdirectory name, \*M will attempt
+to detect whether each page is encoded using UTF-8 or a legacy character set
+appropriate for the language.
+Accordingly, the recommended scheme for installing manual pages is to encode
+them in UTF-8 (or, if that is not practical, in the legacy character set)
+and install them in directories
+.i without
+a character set component in their names.
+.lp
+The territory should normally be omitted unless it is necessary to describe
+the manual page text.
+For example, Brazilian Portuguese is quite distinct from Portuguese and so
+should be installed under the
+.b pt_BR
+subdirectory, but a single German manual page will typically suffice in
+Austria as well as in Germany and so should be installed under the
+.b de
+subdirectory.
+.lp
+The following table gives some examples.
+
+.TS
+center box tab(@);
+l | l | l | l.
+Language@Territory@Character Set@Directory
+_
+French@any@T{
+.ad l
+UTF-8 or ISO-8859-1
+T}@/usr/share/man/fr
+French@Canada@ISO 8859-1@/usr/share/man/fr_CA
+French@any@UTF-8@/usr/share/man/fr.UTF-8
+German@Germany@UTF-8@/usr/share/man/de_DE.UTF-8
+German@Switzerland@ISO 8859-1@/usr/share/man/de_CH.ISO-8859-1
+Japanese@Japan@UTF-8 or EUC-JP@/usr/share/man/ja_JP
+Japanese@Japan@EUC-JP@/usr/share/man/ja_JP.EUC-JP
+Japanese@any@UTF-8@/usr/share/man/ja.UTF-8
+.TE
+
+On systems supporting UTF-8, it is recommended that all manual pages be
+encoded using UTF-8 where possible, in order to simplify the task of editing
+a variety of pages without reconfiguring editors and terminals and the like.
+.lp
+Each of these directories are then interpreted as manual page hierarchies
+themselves and may
+contain the usual section subdirectories.
+Access to NLS manual pages is achieved via use of the
+.b setlocale (3)
+function which queries user environment variables to
+determine the current locale.
+Internally to the \*M utilities, this
+locale string is appended to each manpath element and the resultant NLS manpath
+element is
+searched before the standard manpath element.
+In this way, an NLS manual page
+that matches the search criteria will be shown before or in place of the standard
+American English page.
+.lp
+If a user's
+.EV MANPATH
+consists of or is determined as
+.ip
+.i /usr/local/man:/usr/share/man:/usr/X11R6/man
+.lp
+and their locale is set to
+.b de_DE ,
+the command
+.ip
+.bx "man \-\-systems userix:man foobar"
+.lp
+would produce the following internal \*M manpath elements
+.ip
+.i
+.nf
+/usr/local/man/userix/de_DE
+/usr/local/man/userix/de
+/usr/local/man/userix
+/usr/share/man/userix/de_DE
+/usr/share/man/userix/de
+/usr/share/man/userix
+/usr/X11R6/man/userix/de_DE
+/usr/X11R6/man/userix/de
+/usr/X11R6/man/userix
+/usr/local/man/de_DE
+/usr/local/man/de
+/usr/local/man
+/usr/share/man/de_DE
+/usr/share/man/de
+/usr/share/man
+/usr/X11R6/man/de_DE
+/usr/X11R6/man/de
+/usr/X11R6/man
+.fi
+.r
+.lp
+.b foobar
+would be searched for in the order of manual page hierarchies listed.
+Additional directories corresponding to manual pages encoded in different
+character sets would be used if present.
+.BS 3 "ISO 8859-1 (latin1) manual pages"
+.lp
+By default \*N will format manual pages into a form suitable
+for a typewriter style device, e.g. a terminal screen. \*(GN \*N is
+capable\**
+.(f
+\** see
+.b nroff (5)
+for the output device formats available with your \*N
+.)f
+of formatting \*R into a form suitable for 8-bit latin1 capable output
+devices. To enable output for such a device, give the option
+.ip \-\-with\-device=DEVICE
+.lp
+to
+.b configure
+where DEVICE
+is the suitable and supported output format, in this case
+.b latin1 .
+.BS 3 "Displaying non-ASCII characters on a \*L virtual terminal"
+.lp
+To view non-ASCII characters at the \*L console, you must have one of the
+kbd\** and console\-tools packages installed.
+.(f
+\** written and maintained by Andries Brouwer <aeb@cwi.nl>.
+.)f
+If your system does not come with suitable configuration already, then
+please see the documentation in the kbd or console\-tools package for
+details on how to configure the console for your locale.
+On modern systems, the best choice is likely to be to use the UTF-8 encoding
+with a font suitable for your language.
+Make sure that your locale environment variables match the encoding
+displayed by the console.
+For display under the
+.q "X Window System",
+a suitable 8-bit-clean terminal emulator is required.
+.BS 3 "Viewing ASCII pages formatted for latin1 output device"
+.lp
+When formatting an ASCII manual page for a latin1 output device,
+\*(GN \*N
+will take advantage of the extra characters available and will always
+produce a text page containing some latin1 (8-bit) symbols.
+The table\**
+.(f
+\** The ISO 8859-1 and ASCII columns of this table will be identical if this
+manual was formatted for an ASCII based typewriter display, i.e. using \*N
+in its native mode.
+.)f
+below, taken from
+.b man (1),
+illustrates the differences.
+
+.TS
+center box tab (@);
+l | c | c | c.
+Description@Octal@ISO 8859-1@ASCII
+_
+continuation hyphen@255@\[char173]@\-
+bullet (middle dot)@267@\(bu@o
+acute accent@264@\(aa@'
+multiplication sign@327@\(mu@x
+.TE
+
+To display such symbols on a 7 bit terminal or terminal emulator, they
+must be translated back into standard ASCII.
+The
+.b \-7
+option with
+.b man
+will enable this simple reverse translation.
+.lp
+This option may be useful if your site has both 7 and 8-bit capable output
+devices and nroff is using the latin1 output device to format manual pages.
+.BS 2 "Cat pages"
+.lp
+It has become standard practice to store the formatted manual pages on disk
+so that subsequent requests for the manual page do not have to involve the
+formatting process.
+These pre-formatted manual pages are known as
+.i cat
+pages.
+Although cat pages require additional disk storage requirements, they
+provide a substantial speed increase and their use is recommended.
+.lp
+The automatic support for storing and using cat pages is brought about by
+simply creating suitable directories for them.
+.BS 2 "Cat page hierarchies"
+.lp
+Traditionally, cat pages were stored under the same manual hierarchy as
+their source manual pages, in
+.i cat<sec>
+subdirectories rather than
+.i man<sec> .
+This situation is rather limiting in several situations:
+.ip
+.bu
+When it is advantageous to mount
+.i /usr
+as a read-only filesystem.
+Cat pages cannot be supported in this situation
+without use of symbolic links to various other areas of the filesystem.
+This situation is a greater problem if the media itself is read-only, such as
+CD-ROM.
+.bu
+When NFS mounting alternate OS's manual page hierarchies.
+The alternate system may be under someone else's control and they may not
+want cat pages stored on their system.
+In fact, it is usually a good idea to export the manual page filesystems
+read-only, or import them that way.
+It is possible to avoid the problems, this time with even more symbolic
+links that may need periodic updating.
+.\".bu
+.\"When sharing 
+.\".i /usr 
+.\"with several other machines. There may be a situation where two machines are
+.\"producing the same cat file at the same time. A corrupted cat file is the
+.\"probable result.
+.bu
+If there is a mixture of normal cat files and stray cats\**,
+.(f
+\** cat files that have no source manual page, i.e. they cannot be recreated.
+.)f
+it is very difficult to periodically
+.i trim
+the cat space disk usage by removing seldom accessed cat files.
+.lp
+To avoid all of these problems simultaneously, it was decided to support
+local cat page directory caches.
+.BS 2 "Local cat page directory caches"
+.lp
+Any location for cat page hierarchy may be specified in the
+\*M configuration file.
+The location of the database cache associated with
+each manual page hierarchy will always be at the root of the cat page
+hierarchy.
+By default, the cat page hierarchy shadows the manual page hierarchy.
+The \*F
+proposes
+.i /var/cache/man
+as the location for such directories, although \*M allows any directory
+hierarchy to be used.
+The \*F path transformation rule is as follows:
+.ip
+.i /usr/<hierarchy>/share/man/<locale>/man<sec>/page.<sec><ext>
+.lp
+should be formatted into the cat file
+.ip
+.i /var/cache/man/<hierarchy>/<locale>/cat<sec>/page.<sec><ext>
+.lp
+where the
+.i <locale>
+directory component may be missing and
+.i <ext>
+may be an empty string.
+.lp
+The suggestion is that stray cats are located in the traditional hierarchy
+under
+.i /usr
+whereas re-creatable cat pages are stored under the local writable hierarchy
+.i /var/cache/man.
+.b man
+follows strict rules in determining which file is displayed.
+.lp
+As an example, the following route is
+taken if all three files exist.
+.np
+Check relative modification time stamps of the manual file and the
+traditional cat file.
+If the cat file is up to date (has an equal time stamp), display it.
+.np
+The traditional cat file is out of date.
+Check relative time stamps of the manual file and the alternate cat file.
+If the cat file is up to date, display it.
+.np
+The alternate cat file is out of date.
+Format the manual file and display the result in the foreground, while
+updating the alternate cat file in the background.
+.lp
+When a cat file is created, its time stamp is set to that of the
+corresponding manual file.
+Manual files are often stored in
+.b tar
+archives, and time stamps may be preserved when these archives are unpacked.
+Simply checking whether the cat file is newer would sometimes cause
+.b man
+to display an out-of-date cat file in this case, when it should have
+reformatted the manual file instead.
diff --git a/manual/format.me b/manual/format.me
new file mode 100644
index 0000000..1261e21
--- /dev/null
+++ b/manual/format.me
@@ -0,0 +1,185 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "Formatting"
+.lp
+As already pointed out in the introduction, there are two primary
+formatters common to \*U: \*N and \*T.
+.lp
+In the following sections, I
+will use the term \*T to describe the typesetter formatter and \*N to
+describe the typewriter formatter.
+The term \*R will be used to describe a generic formatter.
+.BS 2 "\*G"
+.lp
+If using the \*G package, there is a further choice, \*G itself.
+Essentially, \*G forms a pipeline of processors including \*T and an output
+processor which translates the ditroff produced by \*T into the appropriate
+output format.
+The default output format, or device, for \*G is \*P.
+Anything else must be specified using the device argument.
+To illustrate \*G, the command
+.ip
+.bx "groff \-Tdvi /dev/null"
+.lp
+will form the following pipeline
+.ip
+troff \-Tdvi /dev/null | grodvi
+.lp
+If \*G is tied to
+.b man 's
+.b \-T
+option, it is still possible for
+.b man
+to produce ditroff via use of the
+.b \-Z
+option.
+.lp
+In \*G 1.09, \*N is bundled as a shell script that calls \*G, which in turn
+calls \*T with the default options
+.b "\-Wall \-mtty-char \-Tascii" ,
+passing the result through
+.b grotty
+before it finally reaches the screen.
+.lp
+It is imperative that the script does not pass pre-processing options
+to \*G's
+command line as
+.b man
+takes care of this separately.
+.BS 2 Devices
+.lp
+Both \*N and \*G may allow output device selection.
+As mentioned previously,
+classic \*N produces output suitable for a typewriter device, classic
+\*T produces output suitable for a
+.b C/A/T
+and \*G produces output suitable for a \*P interpreting device by default.
+.BS 2 "Macros"
+.lp
+There are several \*R macro sets in existence that are suitable for manual
+pages.
+Unfortunately, they tend to be incompatible with each other.
+.lp
+During configuration,
+.b configure
+will attempt to determine a suitable macro set for the local system's manual
+page collection.
+It attempts to use \*N with the following three macro packages:
+
+.TS
+center box tab(@);
+l | l | l .
+macro package@macro filename@nroff command
+_
+andoc@tmac.andoc or andoc.tmac@nroff \-mandoc
+an@tmac.an or an.tmac@nroff \-man
+doc@tmac.doc or doc.tmac@nroff \-mdoc
+.TE
+
+The first that succeeds is used.
+The
+.b andoc
+macro set is suitable for manual pages written using either
+.b an
+or
+.b doc
+macro commands, but not a combination of both.
+.lp
+.BS 2 "Pre-format processors (pre-processors)"
+.lp
+Manual pages may require pre-processing by any of the following
+
+.TS
+center box tab(@);
+l | l | l .
+Program@ID@Pre-processes
+_
+eqn@e@equations
+tbl@t@tables
+grap@g@graphs
+pic@p@pictures
+refer@r@A bibliography
+vgrind@v@program listings
+.TE
+
+It is possible to assign a default pre-processor list that all
+manual pages will be passed through prior to the primary formatter.
+By default, this is empty.
+To define a default list, edit
+.i include/manconfig.h
+and un-comment the following line
+.lp
+/* #define DEFAULT_MANROFFSEQ   "t" */
+.lp
+which will enable
+.b tbl
+processing by default.
+To change the list, replace the
+.b t
+with a suitable string of processor ID's.
+.lp
+Pre-process options may be provided at run time in various forms, but in
+general the pre-processors required by each manual page is indicated in the
+first line of the manual page itself.
+See
+.b man (1)
+for details.
+.lp
+If a manual page does not contain a pre-processor string in its first line,
+it will be scanned for well-known \*R requests used to pass input to
+certain pre-processors.
+Thus, the pre-processor string is often unnecessary for correct output,
+but should nevertheless be included for efficiency.
+.BS 2 "Format scripts"
+.lp
+It is very likely that alternate systems manual pages may require
+non-standard macro packages or possibly even special pre-processors.
+To tackle such problems, special format scripts may be created on a per
+manual hierarchy basis.
+.lp
+If the file
+.ip
+.i <manual_hierarchy>/mandb_nfmt
+.lp
+exists and is executable, it is expected to be able to correctly format a
+manual page originating from
+.i <manual_hierarchy>
+to its standard output.
+It will be supplied with either two or three arguments:
+.(l
+\(bu manual page filename
+\(bu pre-processor string
+\(bu output device (optional)
+.)l
+Similarly, if the option
+.b \-T\c
+.i <device>
+.r
+or
+.b \-t
+was supplied to
+.b man
+and the file
+.ip
+.i <manual_hierarchy>/mandb_tfmt
+.lp
+exists and is executable, it will be used in the same way.
+.lp
+An example of such a script, supplied by Markus Armbruster
+<armbru@pond.sub.org>, who provided support for external formatter scripts,
+can be found as
+.i tools/mandb_fmt\-script
+.lp
+The script can be used as both an \*N and \*T/\*G format script and can be
+installed as
+.i mandb_nfmt
+and hard linked to
+.i mandb_tfmt
+after modification appropriate for your particular site.
diff --git a/manual/glossary.me b/manual/glossary.me
new file mode 100644
index 0000000..cd5316e
--- /dev/null
+++ b/manual/glossary.me
@@ -0,0 +1,50 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.ip "manual page"
+A file containing descriptions related to the use of a function or program
+or the structure of a file.
+The name of the file is formed from the title of
+the manual page followed by a period followed by the name of the section
+that it resides in, optionally followed by an extension.
+The format of the file is \*N and may be compressed,
+having a suitable compression extension appended.
+.ip "cat page"
+A formatted manual page suitable for viewing on a vt100-type terminal.
+.ip "stray cat page"
+A cat page that does not have a relative manual page on the system, i.e. only
+the cat page was supplied or the manual page was removed after the cat page
+had been created.
+.ip section
+Each manual page or cat page hierarchy is divided into sections, each
+section having its own directory.
+Manual page hierarchy section names
+begin with \(oqman\(cq and cat page sections with \(oqcat\(cq.
+.ip extension
+A package may provide manual pages with filenames ending in a
+package-specific extension name.
+This allows manual pages with the same
+title to coexist in the same manual page hierarchy and section without
+sharing the same filename.
+It also provides a further mechanism for man
+to select the correct manual page.
+.ip "manual page hierarchy"
+A directory tree divided into manual page sections, each containing a
+collection of manual pages.
+.ip "cat page hierarchy"
+A directory tree divided into cat page sections, each containing a
+collection of cat pages.
+.ip "traditional cat page hierarchy"
+The same location as the manual page hierarchy.
+.ip "alternate cat page hierarchy"
+A separate location to that of the traditional cat page hierarchy.
+.ip "traditional cat page"
+A cat page located in a traditional cat page hierarchy.
+.ip "alternate cat page"
+A cat page located in an alternate cat page hierarchy.
diff --git a/manual/intro.me b/manual/intro.me
new file mode 100644
index 0000000..a4935bf
--- /dev/null
+++ b/manual/intro.me
@@ -0,0 +1,324 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2001, 2002, 2003, 2007 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.\" chap1.me
+.BS 1 Introduction
+.BS 2 "\*M"
+.lp
+\*M is a package that is designed to provide users with information
+in a fast and friendly manner while at the same time offering flexibility to
+the system administrator.
+.TS
+tab(@);
+l s s s
+l lfB l.
+It is made up of several user programs:
+.sp 6p
+.\" Leave the next line alone!
+      @\(bu man@\- an interface to the system reference manuals
+@\(bu whatis@\- search the manual page names
+@\(bu apropos@\- search the manual page names and descriptions
+@\(bu manpath@\- determine search path for manual pages
+@\(bu lexgrog@\- directly read header information in manual pages
+.T&
+l s s s
+l lfB l.
+.sp 6p 
+several maintenance programs:
+.sp 6p
+@\(bu mandb@\- create or update the manual page index caches
+@\(bu catman@\- create or update the pre-formatted manual pages
+.T&
+l s s s
+l lfB l.
+.sp 6p
+and a special pre-formatter that knows about compressed manual pages:
+.sp 6p
+@\(bu zsoelim@\- satisfy .so requests in roff input
+.TE
+
+In addition to these compiled programs, there are two shell scripts,
+.b mkcatdirs
+and
+.b checkman
+in the
+.i tools
+subdirectory.
+These scripts aid the creation of cat directories and
+check for duplicated manual pages, respectively.
+.lp
+The following manual pages are provided with this package to explain correct
+format and usage.
+.b man (1),
+.b whatis (1),
+.b apropos (1),
+.b manpath (1),
+.b lexgrog (1),
+.b manpath (5),
+.b mandb (8),
+.b catman (8)
+and
+.b zsoelim (1).
+.BS 3 "The concept"
+.lp
+\*M originally started out life as program suite man\-1.1B, written by John W.
+Eaton <jwe@che.utexas.edu> and maintained by Rik Faith <faith@cs.unc.edu>
+to which support proposed by the newly
+formed FSSTND committee regarding cat directories was added.
+.lp
+Since then, \*M's most innovative feature: the database cache scheme\**
+.(f
+\** originally conceived after observing the actions of the Perl-based
+manual pager suite, man-pl written by Tom Christiansen
+<tchrist@convex.com>
+.)f
+has been significantly developed. The basic idea was to reduce manual page
+search times to a minimum. The following piece of text is included from the
+man-db-2.2 distribution:
+.(q
+The theory: If you go to a library to take a book out, what do you do?
+.sp
+a) Go and look where it might be on a micro-fiche/terminal, take a look
+where it is supposed to be on the shelf, and then go look at the new
+arrivals if it's not where it's supposed to be?
+.sp
+OR
+.sp
+b) Start at one end of the ground floor, look along every bookshelf
+until you've completed that floor, then go up a level and start again
+until you've found what you're looking for?
+.)q
+.lp
+Since then the database
+.b index
+scheme has evolved greatly.
+Every manual page and stray cat page on the system is registered in an
+.b index
+database cache which stores various details about the file including the
+timestamp, the location and the whatis\**
+.(f
+\** one line description of the manual page
+.)f
+information.
+This information is kept up to date by regular runs of
+.b mandb .
+In some configurations
+.b man
+also looks for filesystem changes each time it is invoked and helps to
+keep the database cache current, but this imposes a penalty on manual page
+search times.
+.BS 2 "The manual page system"
+.lp
+The simplest manual page system will have a single manual page hierarchy.
+This will typically be
+.ip
+.i /usr/share/man
+.lp
+beneath which will be several subdirectories of the form
+.i man<sec>
+where
+.i <sec>
+is
+.b 1 ,
+.b 2 ,
+.b 3 ,
+.b 4 ,
+.b 5 ,
+.b 6 ,
+.b 7
+or
+.b 8 .
+These are referred to as
+.i sections
+of the
+manual.
+Others may exist and they are not restricted to single
+character names. eg.
+.ip
+.i /usr/share/man/manfoo
+.lp
+is a valid section subdirectory.
+Other common sections include
+.b 9 ,
+.b n ,
+.b l ,
+.b p
+and
+.b o .
+.lp
+Within these section subdirectories reside the manual pages themselves. Their
+filenames follow the pattern
+.ip
+.i /usr/share/man/man<sec>/<name>.<sec><ext>
+.lp
+where in most cases
+.i <ext>
+is an empty string.
+An example is manual page
+.b cp
+.ip
+.i /usr/share/man/man1/cp.1
+.lp
+which resides in
+.i section
+.b 1
+and has no special
+.i extension .
+.lp
+.BS 2 "Sections of the manual"
+.lp
+The manual is split up into sections to ease access and to cater for manual
+pages that share the same name.
+It is common for a program and function to share the same name.
+.b kill
+is a good example.
+This is both a program which can be used to send a process a signal and
+an operating system call with similar functionality.
+Their manual pages are stored under sections
+.b 1
+and
+.b 2
+respectively.
+Thus, sections are used to separate out the program manual pages from the
+function manual pages and so on.
+The table below shows the
+.i section
+numbers of the manual followed by the types of pages they contain.
+
+.TS
+center box tab (@);
+c  | c
+c  | l.
+Section@Section contents
+_
+1@user executable programs or shell commands
+2@system calls (functions provided by the kernel)
+3@library calls (functions within system libraries)
+4@special files (usually found in \fI/dev\fR)
+5@file formats and conventions eg. \fI/etc/passwd\fR
+6@games
+7@macro packages and conventions eg. \fBman\fR(7), \fBgroff\fR(7).
+8@system administration commands
+9@kernel routines [\|Non-standard\|]
+n@new [\|obsolete\|]
+l@local [\|obsolete\|]
+p@public [\|obsolete\|]
+o@old [\|obsolete\|]
+.TE
+
+.BS 2 "The format of manual pages"
+.lp
+The format in which manual pages are stored is \*N/\*T or more generally \*R.
+This is a typesetter style language\**
+.(f
+\** similar in some aspects to
+.b TeX
+.)f
+which requires formatting before being viewed.
+In fact some manual pages require pre-format processing to
+correctly format tables or equations.
+.lp
+If the page is to be viewed on screen in a text environment, \*N is
+used as the primary formatter. If the page is to be printed or displayed in a
+graphical environment, \*T is used. Traditionally, \*T formatted files for a
+.b C/A/T
+(Computer aided Typesetter) which is now obsolete.
+
+The \*(GN \*R (\*G\**)
+.(f
+\** Written by James Clark <jjc@jclark.com> and now maintained by
+Ted Harding <ted.harding@nessie.mcc.ac.uk> and Werner Lemberg <wl@gnu.org>
+.)f
+suite of programs offer a choice of output types
+including
+.b X ,
+.b dvi
+and
+.b postscript .
+When configuring \*M, the preference is
+to use \*G rather than \*T.
+.BS 2 "Arguments to configure"
+.lp
+To allow the configuration program,
+.b configure ,
+to be non-interactive, it can be passed various options to alter the
+default settings.
+Generic
+.b configure
+options are discussed in
+.i docs/INSTALL .
+Options that are specific to the \*M package are described below.
+.if r MAN-OPTIONS-ONLY \{
+.lp
+MAN\-OPTIONS\-BEGIN
+\}
+.lp
+.ip \-\-enable\-cache\-owner[=ARG]
+By default, system-wide cache files will be owned by user man.
+Use this option with an argument to change the cache file owner.
+.ip \-\-disable\-cache\-owner
+Use this option to leave the ownership of system-wide cache files
+unconstrained.
+Users will be allowed to modify them.
+.ip \-\-disable\-setuid
+By default,
+.b man
+will be installed as a setuid program to the user that owns the
+system-wide cache files.
+Use this option to install
+.b man
+as a non-setuid program instead.
+.ip \-\-enable\-mandirs=OS
+By default, \*M supports manual page directories in any of several layouts
+used by free and proprietary versions of \*U.
+However, in certain cases, this can cause \*M to find the wrong page by
+mistake, especially when the names of some manual pages on the system
+contain periods.
+Use this option with an argument of GNU, HPUX, IRIX, Solaris, or BSD
+(or more than one of these, separated by commas) to support only the layouts
+typically used on each of those systems.
+Note that \*M is not currently capable of writing cat pages in the proper
+BSD layout.
+.ip \-\-with\-device=DEVICE
+Use this flag to alter the default output device used by \*N. DEVICE is
+passed to \*N with the \-T option.
+.b configure
+will test that \*N will run with the supplied device argument.
+.ip \-\-with\-db=LIBRARY
+configure will look for database interface libraries in the order gdbm,
+Berkeley DB and finally ndbm and will #define appropriate variables relative
+to the first one found.
+To override the built-in order on platforms having a choice of interface
+library, use this option to specify which library to use.
+.ip \-\-enable\-automatic\-create
+If this flag is used,
+.b man
+will automatically create index databases for users' private manual page
+hierarchies.
+.ip \-\-disable\-automatic\-update
+Normally,
+.b man
+will update entries in index databases if it finds newly installed manual
+pages (if the
+.b \-\-update
+flag is used) or delete entries if manual pages are removed.
+This flag suppresses this behaviour.
+.ip \-\-disable\-cats
+Normally,
+.b man
+will automatically try to create cat files corresponding to manual files
+when a manual page is read.
+This flag suppresses this behaviour.
+.ip \-\-disable\-manual
+Don't build or install the \*M manual.
+This may be useful when cross-compiling, or to reduce the installation size.
+.if r MAN-OPTIONS-ONLY \{
+.lp
+MAN\-OPTIONS\-END
+\}
diff --git a/manual/leader.me b/manual/leader.me
new file mode 100644
index 0000000..385bd51
--- /dev/null
+++ b/manual/leader.me
@@ -0,0 +1,59 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+\*U is a registered trademark of the X/Open Company, Ltd.
+.br
+NFS is a registered trademark of Sun Microsystems, Inc.
+.br
+PostScript is a registered trademark of Adobe in the United States.
+.sp
+The general conventions used throughout this manual include
+.bu
+file names and paths in
+.i italic ,
+e.g.
+.i /usr/share/man .
+.bu
+variable strings (usually path components) enclosed within <> and in
+.i italic ,
+eg.
+.i <sec> ,
+.bu
+program names in
+.b bold ,
+eg.
+.b man .
+.bu
+commands that can be typed at a shell prompt in a
+.bx box ,
+eg.
+.bx "man foobar" .
+.bu
+environment variables denoted as follows:
+.EV ENV_VAR .
+.lp
+.(z F
+Copyright \(co 1995 Graeme W. Wilford
+.br
+Copyright \(co 2001, 2002, 2003, 2007 Colin Watson
+.sp 1
+Permission is granted to make and distribute verbatim copies of this manual
+provided the copyright notice and this permission notice are preserved on
+all copies.
+.sp 1
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the entire
+resulting derived work is distributed under the terms of a notice identical
+to this one.
+.sp 1
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions,
+except that this permission notice may be stated in a translation approved
+by the copyright holder.
+.)z
diff --git a/manual/man_db.me b/manual/man_db.me
new file mode 100644
index 0000000..a0837a2
--- /dev/null
+++ b/manual/man_db.me
@@ -0,0 +1,118 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2001, 2002, 2007 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\"
+.so version
+.ds U \s-1\fBUNIX\fR\s+1
+.ds N \s-1\fBNROFF\fR\s+1
+.ds T \s-1\fBTROFF\fR\s+1
+.ds G \s-1\fBGROFF\fR\s+1
+.ds GN \s-1\fBGNU\fR\s+1
+.ds R \s-1ROFF\s+1
+.ds F \s-1\fBFHS\fR\s+1
+.ds P PostScript
+.ds L Linux
+.ds M man\-db
+.\"
+.\" format an environment variable
+.\"
+.de EV
+.sz -1
+$\c
+.b \\$1
+.sz +1
+..
+.\" end
+.\"
+.\" Begin a new (sub)section, add to TOC
+.\"
+.de BS
+.if \\$1=1 \{   .\" Chapter
+.bp
+.sh \\$1 "\\$2"
+.(x c
+.sp 10p
+.)x _
+.(x c
+.in 0
+\\n($1.\ \ \\$2
+.)x 
+.br \} 
+.\"
+.if \\$1=2 \{   .\" Section
+.sh \\$1 "\\$2"
+.(x c
+.in \w'\0.\ \ 'u
+\\n($1.\\n($2\ \ \\$2
+.)x 
+.br \}
+.\"
+.if \\$1=3 \{   .\" Subsection
+.sh \\$1 "\\$2"
+.(x c
+.in \w'\0.\ \ \0.\0\ \ 'u
+\\n($1.\\n($2.\\n($3\ \ \\$2
+.)x 
+.br \}
+..
+.\" end
+.\"
+.if n \
+.ll 78n
+.tp
+.sp 2i
+.(l C
+.sz 16
+.b "\*M \- the database cached manual pager suite"
+.sz 12
+.sp 2
+.ul
+Graeme W. Wilford <eep2gw@ee.surrey.ac.uk>
+.br
+.ul
+Colin Watson <cjwatson@debian.org>
+.)l
+.sp 4
+.(l F
+This document describes the setup, maintenance and use of a generic
+manual page system with special reference to the \*M package and its
+advanced features.
+.)l
+.\".he '\*M''\*(td'
+.\".fo ''%''
+.he '\*M'v\*V'\*(td'
+.bp
+.fo ''%''
+.\"
+.\" Start the manual
+.\"
+.so leader.me
+.bp 1
+.so intro.me
+.so sec.me
+.so files.me
+.so comp.me
+.so format.me
+.so db.me
+.so misc.me
+.\"
+.\" table of contents page
+.\"
+.he '''''' .\" no header 
+.fo ''%''  .\" pagenumber footer
+.bp 1      .\" reset pagenumber to 1
+.af % i    .\" set pagenumber register to roman numerals
+.ce
+Glossary
+.sp
+.so glossary.me
+.bp 1
+.ce
+Contents
+.sp
+.xp c
diff --git a/manual/misc.me b/manual/misc.me
new file mode 100644
index 0000000..d0b8ec5
--- /dev/null
+++ b/manual/misc.me
@@ -0,0 +1,220 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2001, 2002 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "Miscellaneous"
+.BS 2 "Modes of operation"
+.lp
+The \*M utilities can operate in many different modes, allowing varying
+degrees of freedom, functionality and security.
+No mode requires that the manual page hierarchies be writable.
+.lp
+.ip "(1) Default mode"
+.b man
+is setuid to the user MAN_OWNER which is \(oqman\(cq by default and is
+changeable via options to
+.b configure .
+.b mandb ,
+if run by the superuser or MAN_OWNER, creates globally accessible index
+databases owned by MAN_OWNER.
+Once the databases are created,
+.b man
+will update entries in them if it finds newly installed
+manual pages (if the
+.b \-\-update
+flag is used) or delete entries if manual pages are removed.
+In this mode it is possible for a malicious
+.b man
+user to deliberately lock a database as a writer, thus denying read access to
+other users.
+.br
+If cat directories exist and have the correct permissions,
+.b man
+will take care of producing cat files.
+These will be owned by MAN_OWNER.
+The default permissions of both cat files and databases are 0644.
+.ip "(2) No man database updates"
+This mode also requires
+.b man
+to be setuid, but is favoured where databases must be shared in an
+environment unfriendly to kernel locking procedures, eg. NFS.
+It also prevents possible
+.q "denial of service"
+attacks by malicious
+.b man
+users as
+.b man
+never opens the databases as a writer in this mode.
+To replace the functionality lost by disallowing
+.b man
+write access to the databases,
+.b mandb
+should be rerun whenever new manual pages are installed.
+Otherwise,
+.b man
+will not be able to use the database to find and display the newly added
+manual pages, and will have to use the filesystem instead.
+Each index database may be owned by an arbitrary user who will have
+subsequent write access to the database.
+Cat files are created in the same way as for mode (1) above.
+.br
+To use the \*M utilities in this mode, give the option
+\(oq\-\-disable\-automatic\-update\(cq to
+.b configure .
+.ip "(3) No man database updates or cat production"
+.b man
+is installed not setuid.
+This mode of operation probably offers the highest level of security but
+it requires higher levels of maintenance than other modes due to the
+restrictions imposed upon
+.b man .
+Each database is owned by an arbitrary user as in mode (2).
+Each cat hierarchy is also owned by
+an arbitrary user who is responsible for creating cat files using
+.b catman
+whenever new manual files are installed.
+.b man
+will be completely passive in its action, i.e. no index databases will be
+written to and no cat files are ever produced.
+.br
+To use the \*M utilities in this mode, supply the options
+\(oq\-\-disable\-cache\-owner \-\-disable\-setuid
+\-\-disable\-automatic\-update \-\-disable\-cats\(cq to
+.b configure ,
+or build \*M as in mode (1) and install the binaries without the setuid
+bit set.
+.ip "(4) Wide open"
+.b man
+is installed not setuid.
+This mode is similar in operation to the majority of vendor supplied, non
+setuid, cat file supporting manual pager suites.
+It is not recommended.
+The databases are owned by an arbitrary user who maintains them using
+.b mandb .
+.b man
+does not update the databases.
+Cat files are produced and stored in world writable cat directories and have
+world write access themselves.
+.br
+To use the \*M utilities in this mode, supply the options
+\(oq\-\-disable\-cache\-owner \-\-disable\-setuid
+\-\-disable\-automatic\-update\(cq to
+.b configure ,
+edit
+.i include/manconfig.h
+and change the definition of CATMODE from 0644 to 0666.
+.lp
+Other variations can also be used.
+In fact it is possible for
+.b man
+to actually create index databases, usually the job of
+.b mandb ,
+for users' private manual page hierarchies.
+This is enabled by giving the option
+\(oq\-\-enable\-automatic\-create\(cq to
+.b configure .
+.lp
+In summary,
+.i include/manconfig.h
+contains definitions for
+.bu
+CATMODE
+.bu
+DBMODE
+.lp
+the setuid installation and operation of
+.b man
+is modified by supplying either of the following options to
+.b configure :
+.bu
+\-\-enable\-setuid
+.bu
+\-\-disable\-setuid
+.lp
+and other aspects of
+.b man 's
+behaviour are controlled by the following options to
+.b configure :
+.bu
+\-\-enable\-automatic\-create
+.bu
+\-\-disable\-automatic\-update
+.bu
+\-\-disable\-cats
+.BS 2 "NFS root squash"
+.lp
+If
+.b man
+is installed setuid to an arbitrary user and is run by root, instead of
+gaining the effective user id of the setuid user,
+.b man
+is run with both uid and euid as root.
+This is neccesary due to infelicities with the
+.b POSIX
+setuid() function call:  All users except root may change to and from the
+effective (setuid) user, however once root has setuid(user), there is no way
+back.
+.lp
+A side effect of this is that
+.b NFS
+mounted cat hierarchies or databases will be unwritable if the following
+conditions exist:
+.bu
+man/catman/mandb is run by root
+.bu
+The NFS mount has the root squash flag set
+.lp
+To get around this problem, the root user must first attain the ID of the
+cat hierarchy or database owner before running
+.b man/catman/mandb
+whenever the databases need updating or cat files are to be produced.
+.BS 2 "NLS message catalogues"
+.lp
+\*M has built in support for native language message catalogues.
+That is, it can issue messages in the locale of the user's choice.
+This will only occur if the locale's translation has been written.
+Before undertaking a translation, please contact the Translation Project
+(https://translationproject.org/) who are coordinating such activities.
+.BS 2 "Credits"
+.lp
+The authors would like to thank the following people for their time, effort,
+support, ideas and code which went into \*M:
+.(l
+Markus Armbruster <armbru@pond.sub.org>
+Lionel Cons & colleages <cons@dxcern.cern.ch>
+Carl Edman <cedman@princeton.edu>
+Caleb Epstein <epstein_caleb@jpmorgan.com>
+Lars Fenneberg <lf@gimli.comlink.de>
+Zoltan Hidvegi <hzoli@cs.elte.hu>
+Nils Magnus <magnus@unix-ag.uni-kl.de>
+Daniel Quinlan <quinlan@yggdrasil.com>
+Fabrizio Polacco <fpolacco@debian.org>
+Gordon Sadler <gbsadler1@lcisp.com>
+Colin Phipps <cph@cph.demon.co.uk>
+Paul Slootman <paul@wurtel.net>
+Jose Rodriguez <boriel@airtel.net>
+Eirik Fuller <eirik@hackrat.com>
+Matej Vela <vela@debian.org>
+Clint Adams <schizo@debian.org>
+Jeremy C. Reed <reed@reedmedia.net>
+Erik Andersen <andersen@codepoet.org>
+Giuseppe Sacco <eppesuig@debian.org>
+David Weinehall <tao@debian.org>
+Ralph Corderoy <ralph@inputplus.co.uk>
+Yuri Kozlov <kozlov.y@gmail.com>
+Henning Makholm <henning@makholm.net>
+Lars Wirzenius <liw@iki.fi>
+Nicolas Fran\(,cois <nicolas.francois@centraliens.net>
+Ivan Shmakov <oneingray@gmail.com>
+Peter Breitenlohner <peb@mppmu.mpg.de>
+Robert Luberda <robert@debian.org>
+Chusslove Illich <caslav.ilic@gmx.net>
+.)l
+and all those translators listed in the
+.b man/THANKS
+file.
diff --git a/manual/options-only.me b/manual/options-only.me
new file mode 100644
index 0000000..7b04d48
--- /dev/null
+++ b/manual/options-only.me
@@ -0,0 +1,13 @@
+.\" Extract just the list of options from intro.me, disabling the usual
+.\" hyphenation and adjustment. This looks better in README.
+.nh
+.de hy
+..
+.na
+.de ad
+..
+.pl 10000i
+.de bp
+..
+.nr MAN-OPTIONS-ONLY 1
+.so man_db.me
diff --git a/manual/print-options b/manual/print-options
new file mode 100755
index 0000000..267fa2a
--- /dev/null
+++ b/manual/print-options
@@ -0,0 +1,14 @@
+#! /bin/sh
+LC_ALL=C LANGUAGE= nroff -c -me options-only.me | col -bpx | perl -ne '
+    $match = /^MAN-OPTIONS-BEGIN/ ... /^MAN-OPTIONS-END/;
+    if ($match > 1 and $match !~ /E0/) {
+	# Trim leading and trailing blank lines.
+	if (/^$/) {
+	    $diversion .= $_ if $start;
+	} else {
+	    print $diversion;
+	    $diversion = "";
+	    print;
+	    $start = 1;
+	}
+    }'
diff --git a/manual/sec.me b/manual/sec.me
new file mode 100644
index 0000000..12dd28a
--- /dev/null
+++ b/manual/sec.me
@@ -0,0 +1,136 @@
+.\" Copyright (C), 1995, Graeme W. Wilford. (Wilf.)
+.\" Copyright (c) 2002, 2007 Colin Watson.
+.\"
+.\" You may distribute under the terms of the GNU General Public
+.\" License as specified in the file COPYING that comes with the
+.\" man-db distribution.
+.\"
+.\" Thu Sep 21 19:22:47 BST 1995  Wilf. (G.Wilford@ee.surrey.ac.uk) 
+.\" 
+.BS 1 "The specifics of Sections"
+.BS 2 "Package specific manual page sections"
+.lp
+The use of package specific manual page
+sections is discouraged as packages large enough to warrant their own
+section probably contain manual pages that span other sections.
+An example might be package
+.b foo
+that has its own section
+.ip
+.i /usr/share/man/manfoo
+.lp
+which contains manual pages
+describing its programs, the library routines it offers and the format of
+several of its configuration files.
+These pages would normally be allocated to sections
+.b 1 ,
+.b 3
+and
+.b 5
+respectively and thus combining them all under section
+.b foo
+is misleading.
+Subtle problems will arise if there are any
+base name-space clashes with standard manual pages, e.g.
+.b exit (3),
+.b exit (foo)
+and the order in which they should be shown.
+.lp
+There are two standard solutions to this problem.
+.np
+Create a separate manual page hierarchy for the package's manual pages such as
+.(l
+.i /usr/local/packages/foo/man
+.)l
+.np
+Install the pages in their relevant sections, with a unique extension
+appended to the filename such that
+.(l
+.i /usr/share/man/manfoo/exit.foo
+.)l
+would instead be installed as
+.(l
+.i /usr/share/man/man1/exit.1foo
+.)l
+.lp
+Only (2) offers a complete
+solution to manual page ordering problems and
+allows users to access the desired page directly.
+.BS 2 "Selecting a section type"
+.BS 3 "Specifying a section"
+.lp
+This is done via use of the section argument to man
+.ip
+.bx "man 1 exit"
+.lp
+will look for
+.i exit.1*
+in section
+.b 1
+of the manual.
+If
+.i exit.1
+exists, it will be displayed in preference to
+.i exit.1foo
+.ip
+.bx "man 1foo exit"
+.lp
+will look for
+.i exit.1foo*
+in section
+.b 1
+of the manual.
+The asterisk (*) represents a wild-card of any type or length,
+including length zero.
+.lp
+For an argument to be interpreted as a section name rather than a page name, it
+must either begin with a digit, or be included in the standard section list.
+The default section list is defined in
+.i include/manconfig.h
+to be
+.b 1 ,
+.b n ,
+.b l ,
+.b 8 ,
+.b 3 ,
+.b 2 ,
+.b 5 ,
+.b 4 ,
+.b 9 ,
+.b 6
+and
+.b 7 .
+This should be modified in order and content to meet the local conventions.
+It may be altered at run-time using the
+.b SECTION
+directive in the \*M configuration file.
+.lp
+Every subdirectory section name in the entire system must be in the list,
+including sections found in imported manual page hierarchies.
+It is not necessary to list sections with extensions unless a special
+ordering for those extensions is desired.
+The order is important because in normal operation,
+.b man
+will only display the first manual page it finds that meets the search
+criteria. Using the
+.b \-\-all
+argument will cause
+.b man
+to attempt to display all manual pages that meet the criteria. See
+.b man (1)
+for further information.
+.lp
+Having an excess of sections listed will not slow
+.b man
+down.
+.BS 3 "Specifying an extension"
+.lp
+If the section is unknown, but the package extension is,
+it is possible to use the extension argument
+.ip
+.bx "man \-e foo exit"
+.lp
+to search in all sections for manual pages named
+.i exit
+from package
+.i foo .