diff options
Diffstat (limited to 'sample-config/nrpe.cfg.in')
| -rw-r--r-- | sample-config/nrpe.cfg.in | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/sample-config/nrpe.cfg.in b/sample-config/nrpe.cfg.in new file mode 100644 index 0000000..3e70183 --- /dev/null +++ b/sample-config/nrpe.cfg.in @@ -0,0 +1,369 @@ +############################################################################# +# +# Sample NRPE Config File +# +# Notes: +# +# This is a sample configuration file for the NRPE daemon. It needs to be +# located on the remote host that is running the NRPE daemon, not the host +# from which the check_nrpe client is being executed. +# +############################################################################# + + +# LOG FACILITY +# The syslog facility that should be used for logging purposes. + +log_facility=@log_facility@ + + + +# LOG FILE +# If a log file is specified in this option, nrpe will write to +# that file instead of using syslog. + +#log_file=@logdir@/nrpe.log + + + +# DEBUGGING OPTION +# This option determines whether or not debugging messages are logged to the +# syslog facility. +# Values: 0=debugging off, 1=debugging on + +debug=0 + + + +# PID FILE +# The name of the file in which the NRPE daemon should write it's process ID +# number. The file is only written if the NRPE daemon is started by the root +# user and is running in standalone mode. + +pid_file=@piddir@/nrpe.pid + + + +# PORT NUMBER +# Port number we should wait for connections on. +# NOTE: This must be a non-privileged port (i.e. > 1024). +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +server_port=@nrpe_port@ + + + +# SERVER ADDRESS +# Address that nrpe should bind to in case there are more than one interface +# and you do not want nrpe to bind on all interfaces. +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +#server_address=127.0.0.1 + + + +# LISTEN QUEUE SIZE +# Listen queue size (backlog) for serving incoming connections. +# You may want to increase this value under high load. + +#listen_queue_size=5 + + + +# NRPE USER +# This determines the effective user that the NRPE daemon should run as. +# You can either supply a username or a UID. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +nrpe_user=@nrpe_user@ + + + +# NRPE GROUP +# This determines the effective group that the NRPE daemon should run as. +# You can either supply a group name or a GID. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +nrpe_group=@nrpe_group@ + + + +# ALLOWED HOST ADDRESSES +# This is an optional comma-delimited list of IP address or hostnames +# that are allowed to talk to the NRPE daemon. Network addresses with a bit mask +# (i.e. 192.168.1.0/24) are also supported. Hostname wildcards are not currently +# supported. +# +# Note: The daemon only does rudimentary checking of the client's IP +# address. I would highly recommend adding entries in your /etc/hosts.allow +# file to allow only the specified host to connect to the port +# you are running this daemon on. +# +# NOTE: This option is ignored if NRPE is running under either inetd or xinetd + +allowed_hosts=127.0.0.1,::1 + + + +# COMMAND ARGUMENT PROCESSING +# This option determines whether or not the NRPE daemon will allow clients +# to specify arguments to commands that are executed. This option only works +# if the daemon was configured with the --enable-command-args configure script +# option. +# +# *** ENABLING THIS OPTION IS A SECURITY RISK! *** +# Read the SECURITY file for information on some of the security implications +# of enabling this variable. +# +# Values: 0=do not allow arguments, 1=allow command arguments + +dont_blame_nrpe=0 + + + +# BASH COMMAND SUBSTITUTION +# This option determines whether or not the NRPE daemon will allow clients +# to specify arguments that contain bash command substitutions of the form +# $(...). This option only works if the daemon was configured with both +# the --enable-command-args and --enable-bash-command-substitution configure +# script options. +# +# *** ENABLING THIS OPTION IS A HIGH SECURITY RISK! *** +# Read the SECURITY file for information on some of the security implications +# of enabling this variable. +# +# Values: 0=do not allow bash command substitutions, +# 1=allow bash command substitutions + +allow_bash_command_substitution=0 + + + +# COMMAND PREFIX +# This option allows you to prefix all commands with a user-defined string. +# A space is automatically added between the specified prefix string and the +# command line from the command definition. +# +# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! *** +# Usage scenario: +# Execute restricted commmands using sudo. For this to work, you need to add +# the nagios user to your /etc/sudoers. An example entry for allowing +# execution of the plugins from might be: +# +# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/ +# +# This lets the nagios user run all commands in that directory (and only them) +# without asking for a password. If you do this, make sure you don't give +# random users write access to that directory or its contents! + +# command_prefix=/usr/bin/sudo + + +# MAX COMMANDS +# This specifies how many children processes may be spawned at any one +# time, essentially limiting the fork()s that occur. +# Default (0) is set to unlimited +# max_commands=0 + + + +# COMMAND TIMEOUT +# This specifies the maximum number of seconds that the NRPE daemon will +# allow plugins to finish executing before killing them off. + +command_timeout=60 + + + +# CONNECTION TIMEOUT +# This specifies the maximum number of seconds that the NRPE daemon will +# wait for a connection to be established before exiting. This is sometimes +# seen where a network problem stops the SSL being established even though +# all network sessions are connected. This causes the nrpe daemons to +# accumulate, eating system resources. Do not set this too low. + +connection_timeout=300 + + + +# WEAK RANDOM SEED OPTION +# This directive allows you to use SSL even if your system does not have +# a /dev/random or /dev/urandom (on purpose or because the necessary patches +# were not applied). The random number generator will be seeded from a file +# which is either a file pointed to by the environment valiable $RANDFILE +# or $HOME/.rnd. If neither exists, the pseudo random number generator will +# be initialized and a warning will be issued. +# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness + +#allow_weak_random_seed=1 + + + +# SSL/TLS OPTIONS +# These directives allow you to specify how to use SSL/TLS. + +# SSL VERSION +# This can be any of: SSLv2 (only use SSLv2), SSLv2+ (use any version), +# SSLv3 (only use SSLv3), SSLv3+ (use SSLv3 or above), TLSv1 (only use +# TLSv1), TLSv1+ (use TLSv1 or above), TLSv1.1 (only use TLSv1.1), +# TLSv1.1+ (use TLSv1.1 or above), TLSv1.2 (only use TLSv1.2), +# TLSv1.2+ (use TLSv1.2 or above) +# If an "or above" version is used, the best will be negotiated. So if both +# ends are able to do TLSv1.2 and use specify SSLv2, you will get TLSv1.2. +# If you are using openssl 1.1.0 or above, the SSLv2 options are not available. + +#ssl_version=SSLv2+ + +# SSL USE ADH +# This is for backward compatibility and is DEPRECATED. Set to 1 to enable +# ADH or 2 to require ADH. 1 is currently the default but will be changed +# in a later version. + +#ssl_use_adh=1 + +# SSL CIPHER LIST +# This lists which ciphers can be used. For backward compatibility, this +# defaults to 'ssl_cipher_list=ALL:!MD5:@STRENGTH' for < OpenSSL 1.1.0, +# and 'ssl_cipher_list=ALL:!MD5:@STRENGTH:@SECLEVEL=0' for OpenSSL 1.1.0 and +# greater. + +#ssl_cipher_list=ALL:!MD5:@STRENGTH +#ssl_cipher_list=ALL:!MD5:@STRENGTH:@SECLEVEL=0 +#ssl_cipher_list=ALL:!aNULL:!eNULL:!SSLv2:!LOW:!EXP:!RC4:!MD5:@STRENGTH + +# SSL Certificate and Private Key Files + +#ssl_cacert_file=/etc/ssl/servercerts/ca-cert.pem +#ssl_cert_file=/etc/ssl/servercerts/nagios-cert.pem +#ssl_privatekey_file=/etc/ssl/servercerts/nagios-key.pem + +# SSL USE CLIENT CERTS +# This options determines client certificate usage. +# Values: 0 = Don't ask for or require client certificates (default) +# 1 = Ask for client certificates +# 2 = Require client certificates + +#ssl_client_certs=0 + +# SSL LOGGING +# This option determines which SSL messages are send to syslog. OR values +# together to specify multiple options. + +# Values: 0x00 (0) = No additional logging (default) +# 0x01 (1) = Log startup SSL/TLS parameters +# 0x02 (2) = Log remote IP address +# 0x04 (4) = Log SSL/TLS version of connections +# 0x08 (8) = Log which cipher is being used for the connection +# 0x10 (16) = Log if client has a certificate +# 0x20 (32) = Log details of client's certificate if it has one +# -1 or 0xff or 0x2f = All of the above + +#ssl_logging=0x00 + + + +# NASTY METACHARACTERS +# This option allows you to override the list of characters that cannot +# be passed to the NRPE daemon. + +# nasty_metachars="|`&><'\\[]{};\r\n" + +# This option allows you to enable or disable logging error messages to the syslog facilities. +# If this option is not set, the error messages will be logged. +disable_syslog=0 + +# COMMAND DEFINITIONS +# Command definitions that this daemon will run. Definitions +# are in the following format: +# +# command[<command_name>]=<command_line> +# +# When the daemon receives a request to return the results of <command_name> +# it will execute the command specified by the <command_line> argument. +# +# Unlike Nagios, the command line cannot contain macros - it must be +# typed exactly as it should be executed. +# +# Note: Any plugins that are used in the command lines must reside +# on the machine that this daemon is running on! The examples below +# assume that you have plugins installed in a /usr/local/nagios/libexec +# directory. Also note that you will have to modify the definitions below +# to match the argument format the plugins expect. Remember, these are +# examples only! + + +# The following examples use hardcoded command arguments... +# This is by far the most secure method of using NRPE + +command[check_users]=@pluginsdir@/check_users -w 5 -c 10 +command[check_load]=@pluginsdir@/check_load -r -w .15,.10,.05 -c .30,.25,.20 +command[check_hda1]=@pluginsdir@/check_disk -w 20% -c 10% -p /dev/hda1 +command[check_zombie_procs]=@pluginsdir@/check_procs -w 5 -c 10 -s Z +command[check_total_procs]=@pluginsdir@/check_procs -w 150 -c 200 + + +# The following examples allow user-supplied arguments and can +# only be used if the NRPE daemon was compiled with support for +# command arguments *AND* the dont_blame_nrpe directive in this +# config file is set to '1'. This poses a potential security risk, so +# make sure you read the SECURITY file before doing this. + +### MISC SYSTEM METRICS ### +#command[check_users]=@pluginsdir@/check_users $ARG1$ +#command[check_load]=@pluginsdir@/check_load $ARG1$ +#command[check_disk]=@pluginsdir@/check_disk $ARG1$ +#command[check_swap]=@pluginsdir@/check_swap $ARG1$ +#command[check_cpu_stats]=@pluginsdir@/check_cpu_stats.sh $ARG1$ +#command[check_mem]=@pluginsdir@/custom_check_mem -n $ARG1$ + +### GENERIC SERVICES ### +#command[check_init_service]=sudo @pluginsdir@/check_init_service $ARG1$ +#command[check_services]=@pluginsdir@/check_services -p $ARG1$ + +### SYSTEM UPDATES ### +#command[check_yum]=@pluginsdir@/check_yum +#command[check_apt]=@pluginsdir@/check_apt + +### PROCESSES ### +#command[check_all_procs]=@pluginsdir@/custom_check_procs +#command[check_procs]=@pluginsdir@/check_procs $ARG1$ + +### OPEN FILES ### +#command[check_open_files]=@pluginsdir@/check_open_files.pl $ARG1$ + +### NETWORK CONNECTIONS ### +#command[check_netstat]=@pluginsdir@/check_netstat.pl -p $ARG1$ $ARG2$ + +### ASTERISK ### +#command[check_asterisk]=@pluginsdir@/check_asterisk.pl $ARG1$ +#command[check_sip]=@pluginsdir@/check_sip $ARG1$ +#command[check_asterisk_sip_peers]=sudo @pluginsdir@/check_asterisk_sip_peers.sh $ARG1$ +#command[check_asterisk_version]=@pluginsdir@/nagisk.pl -c version +#command[check_asterisk_peers]=@pluginsdir@/nagisk.pl -c peers +#command[check_asterisk_channels]=@pluginsdir@/nagisk.pl -c channels +#command[check_asterisk_zaptel]=@pluginsdir@/nagisk.pl -c zaptel +#command[check_asterisk_span]=@pluginsdir@/nagisk.pl -c span -s 1 + + + +# INCLUDE CONFIG FILE +# This directive allows you to include definitions from an external config file. + +#include=<somefile.cfg> + + + +# INCLUDE CONFIG DIRECTORY +# This directive allows you to include definitions from config files (with a +# .cfg extension) in one or more directories (with recursion). + +#include_dir=<somedirectory> +#include_dir=<someotherdirectory> + +# KEEP ENVIRONMENT VARIABLES +# This directive allows you to retain specific variables from the environment +# when starting the NRPE daemon. + +#keep_env_vars=NRPE_MULTILINESUPPORT,NRPE_PROGRAMVERSION |