diff options
Diffstat (limited to 'collectors/charts.d.plugin/nut')
| -rw-r--r-- | collectors/charts.d.plugin/nut/Makefile.inc | 13 | ||||
| -rw-r--r-- | collectors/charts.d.plugin/nut/README.md | 74 | ||||
| -rw-r--r-- | collectors/charts.d.plugin/nut/nut.chart.sh | 232 | ||||
| -rw-r--r-- | collectors/charts.d.plugin/nut/nut.conf | 33 |
4 files changed, 352 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/nut/Makefile.inc b/collectors/charts.d.plugin/nut/Makefile.inc new file mode 100644 index 0000000..4fb4714 --- /dev/null +++ b/collectors/charts.d.plugin/nut/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += nut/nut.chart.sh +dist_chartsconfig_DATA += nut/nut.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += nut/README.md nut/Makefile.inc + diff --git a/collectors/charts.d.plugin/nut/README.md b/collectors/charts.d.plugin/nut/README.md new file mode 100644 index 0000000..3f9c5f0 --- /dev/null +++ b/collectors/charts.d.plugin/nut/README.md @@ -0,0 +1,74 @@ +<!-- +title: "UPS/PDU monitoring with Netdata" +custom_edit_url: https://github.com/netdata/netdata/edit/master/collectors/charts.d.plugin/nut/README.md +sidebar_label: "UPS/PDU" +--> + +# UPS/PDU monitoring with Netdata + +Collects UPS data for all power devices configured in the system. + +The following charts will be created: + +1. **UPS Charge** + +- percentage changed + +2. **UPS Battery Voltage** + +- current voltage +- high voltage +- low voltage +- nominal voltage + +3. **UPS Input Voltage** + +- current voltage +- fault voltage +- nominal voltage + +4. **UPS Input Current** + +- nominal current + +5. **UPS Input Frequency** + +- current frequency +- nominal frequency + +6. **UPS Output Voltage** + +- current voltage + +7. **UPS Load** + +- current load + +8. **UPS Temperature** + +- current temperature + +## Configuration + +Edit the `charts.d/nut.conf` configuration file using `edit-config` from the Netdata [config +directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/nut.conf +``` + +This is the internal default for `charts.d/nut.conf` + +```sh +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +nut_ups= + +# how frequently to collect UPS data +nut_update_every=2 +``` + +--- + +[](<>) diff --git a/collectors/charts.d.plugin/nut/nut.chart.sh b/collectors/charts.d.plugin/nut/nut.chart.sh new file mode 100644 index 0000000..6023336 --- /dev/null +++ b/collectors/charts.d.plugin/nut/nut.chart.sh @@ -0,0 +1,232 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016-2017 Costa Tsaousis <costa@tsaousis.gr> +# + +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +nut_ups= + +# how frequently to collect UPS data +nut_update_every=2 + +# how much time in seconds, to wait for nut to respond +nut_timeout=2 + +# set this to 1, to enable another chart showing the number +# of UPS clients connected to upsd +nut_clients_chart=0 + +# the priority of nut related to other charts +nut_priority=90000 + +declare -A nut_ids=() +declare -A nut_names=() + +nut_get_all() { + run -t $nut_timeout upsc -l +} + +nut_get() { + run -t $nut_timeout upsc "$1" + + if [ "${nut_clients_chart}" -eq "1" ]; then + printf "ups.connected_clients: " + run -t $nut_timeout upsc -c "$1" | wc -l + fi +} + +nut_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + local x + + require_cmd upsc || return 1 + + [ -z "$nut_ups" ] && nut_ups="$(nut_get_all)" + + for x in $nut_ups; do + nut_get "$x" > /dev/null + # shellcheck disable=SC2181 + if [ $? -eq 0 ]; then + if [ -n "${nut_names[${x}]}" ]; then + nut_ids[$x]="$(fixid "${nut_names[${x}]}")" + else + nut_ids[$x]="$(fixid "$x")" + fi + continue + fi + error "cannot get information for NUT UPS '$x'." + done + + if [ ${#nut_ids[@]} -eq 0 ]; then + # shellcheck disable=SC2154 + error "Cannot find UPSes - please set nut_ups='ups_name' in $confd/nut.conf" + return 1 + fi + + return 0 +} + +nut_create() { + # create the charts + local x + + for x in "${nut_ids[@]}"; do + cat << EOF +CHART nut_$x.charge '' "UPS Charge" "percentage" ups nut.charge area $((nut_priority + 1)) $nut_update_every +DIMENSION battery_charge charge absolute 1 100 + +CHART nut_$x.runtime '' "UPS Runtime" "seconds" ups nut.runtime area $((nut_priority + 2)) $nut_update_every +DIMENSION battery_runtime runtime absolute 1 100 + +CHART nut_$x.battery_voltage '' "UPS Battery Voltage" "Volts" ups nut.battery.voltage line $((nut_priority + 3)) $nut_update_every +DIMENSION battery_voltage voltage absolute 1 100 +DIMENSION battery_voltage_high high absolute 1 100 +DIMENSION battery_voltage_low low absolute 1 100 +DIMENSION battery_voltage_nominal nominal absolute 1 100 + +CHART nut_$x.input_voltage '' "UPS Input Voltage" "Volts" input nut.input.voltage line $((nut_priority + 4)) $nut_update_every +DIMENSION input_voltage voltage absolute 1 100 +DIMENSION input_voltage_fault fault absolute 1 100 +DIMENSION input_voltage_nominal nominal absolute 1 100 + +CHART nut_$x.input_current '' "UPS Input Current" "Ampere" input nut.input.current line $((nut_priority + 5)) $nut_update_every +DIMENSION input_current_nominal nominal absolute 1 100 + +CHART nut_$x.input_frequency '' "UPS Input Frequency" "Hz" input nut.input.frequency line $((nut_priority + 6)) $nut_update_every +DIMENSION input_frequency frequency absolute 1 100 +DIMENSION input_frequency_nominal nominal absolute 1 100 + +CHART nut_$x.output_voltage '' "UPS Output Voltage" "Volts" output nut.output.voltage line $((nut_priority + 7)) $nut_update_every +DIMENSION output_voltage voltage absolute 1 100 + +CHART nut_$x.load '' "UPS Load" "percentage" ups nut.load area $((nut_priority)) $nut_update_every +DIMENSION load load absolute 1 100 + +CHART nut_$x.temp '' "UPS Temperature" "temperature" ups nut.temperature line $((nut_priority + 8)) $nut_update_every +DIMENSION temp temp absolute 1 100 +EOF + + if [ "${nut_clients_chart}" = "1" ]; then + cat << EOF2 +CHART nut_$x.clients '' "UPS Connected Clients" "clients" ups nut.clients area $((nut_priority + 9)) $nut_update_every +DIMENSION clients '' absolute 1 1 +EOF2 + fi + + done + + return 0 +} + +nut_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local i x + for i in "${!nut_ids[@]}"; do + x="${nut_ids[$i]}" + nut_get "$i" | awk " +BEGIN { + battery_charge = 0; + battery_runtime = 0; + battery_voltage = 0; + battery_voltage_high = 0; + battery_voltage_low = 0; + battery_voltage_nominal = 0; + input_voltage = 0; + input_voltage_fault = 0; + input_voltage_nominal = 0; + input_current_nominal = 0; + input_frequency = 0; + input_frequency_nominal = 0; + output_voltage = 0; + load = 0; + temp = 0; + client = 0; + do_clients = ${nut_clients_chart}; +} +/^battery.charge: .*/ { battery_charge = \$2 * 100 }; +/^battery.runtime: .*/ { battery_runtime = \$2 * 100 }; +/^battery.voltage: .*/ { battery_voltage = \$2 * 100 }; +/^battery.voltage.high: .*/ { battery_voltage_high = \$2 * 100 }; +/^battery.voltage.low: .*/ { battery_voltage_low = \$2 * 100 }; +/^battery.voltage.nominal: .*/ { battery_voltage_nominal = \$2 * 100 }; +/^input.voltage: .*/ { input_voltage = \$2 * 100 }; +/^input.voltage.fault: .*/ { input_voltage_fault = \$2 * 100 }; +/^input.voltage.nominal: .*/ { input_voltage_nominal = \$2 * 100 }; +/^input.current.nominal: .*/ { input_current_nominal = \$2 * 100 }; +/^input.frequency: .*/ { input_frequency = \$2 * 100 }; +/^input.frequency.nominal: .*/ { input_frequency_nominal = \$2 * 100 }; +/^output.voltage: .*/ { output_voltage = \$2 * 100 }; +/^ups.load: .*/ { load = \$2 * 100 }; +/^ups.temperature: .*/ { temp = \$2 * 100 }; +/^ups.connected_clients: .*/ { clients = \$2 }; +END { + print \"BEGIN nut_$x.charge $1\"; + print \"SET battery_charge = \" battery_charge; + print \"END\" + + print \"BEGIN nut_$x.runtime $1\"; + print \"SET battery_runtime = \" battery_runtime; + print \"END\" + + print \"BEGIN nut_$x.battery_voltage $1\"; + print \"SET battery_voltage = \" battery_voltage; + print \"SET battery_voltage_high = \" battery_voltage_high; + print \"SET battery_voltage_low = \" battery_voltage_low; + print \"SET battery_voltage_nominal = \" battery_voltage_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_voltage $1\"; + print \"SET input_voltage = \" input_voltage; + print \"SET input_voltage_fault = \" input_voltage_fault; + print \"SET input_voltage_nominal = \" input_voltage_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_current $1\"; + print \"SET input_current_nominal = \" input_current_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_frequency $1\"; + print \"SET input_frequency = \" input_frequency; + print \"SET input_frequency_nominal = \" input_frequency_nominal; + print \"END\" + + print \"BEGIN nut_$x.output_voltage $1\"; + print \"SET output_voltage = \" output_voltage; + print \"END\" + + print \"BEGIN nut_$x.load $1\"; + print \"SET load = \" load; + print \"END\" + + print \"BEGIN nut_$x.temp $1\"; + print \"SET temp = \" temp; + print \"END\" + + if(do_clients) { + print \"BEGIN nut_$x.clients $1\"; + print \"SET clients = \" clients; + print \"END\" + } +}" + # shellcheck disable=2181 + [ $? -ne 0 ] && unset "nut_ids[$i]" && error "failed to get values for '$i', disabling it." + done + + [ ${#nut_ids[@]} -eq 0 ] && error "no UPSes left active." && return 1 + return 0 +} diff --git a/collectors/charts.d.plugin/nut/nut.conf b/collectors/charts.d.plugin/nut/nut.conf new file mode 100644 index 0000000..b95ad90 --- /dev/null +++ b/collectors/charts.d.plugin/nut/nut.conf @@ -0,0 +1,33 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +#nut_ups= + +# each line represents an alias for one UPS +# if empty, the FQDN will be used +#nut_names["FQDN1"]="alias" +#nut_names["FQDN2"]="alias" + +# how much time in seconds, to wait for nut to respond +#nut_timeout=2 + +# set this to 1, to enable another chart showing the number +# of UPS clients connected to upsd +#nut_clients_chart=1 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#nut_update_every=2 + +# the charts priority on the dashboard +#nut_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#nut_retries=10 |