summaryrefslogtreecommitdiffstats
path: root/collectors/python.d.plugin/smartd_log/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'collectors/python.d.plugin/smartd_log/README.md')
-rw-r--r--collectors/python.d.plugin/smartd_log/README.md125
1 files changed, 125 insertions, 0 deletions
diff --git a/collectors/python.d.plugin/smartd_log/README.md b/collectors/python.d.plugin/smartd_log/README.md
new file mode 100644
index 0000000..a1b41f4
--- /dev/null
+++ b/collectors/python.d.plugin/smartd_log/README.md
@@ -0,0 +1,125 @@
+<!--
+title: "Storage devices monitoring with Netdata"
+custom_edit_url: https://github.com/netdata/netdata/edit/master/collectors/python.d.plugin/smartd_log/README.md
+sidebar_label: "S.M.A.R.T. attributes"
+-->
+
+# Storage devices monitoring with Netdata
+
+Monitors `smartd` log files to collect HDD/SSD S.M.A.R.T attributes.
+
+## Requirements
+
+- `smartmontools`
+
+It produces following charts for SCSI devices:
+
+1. **Read Error Corrected**
+
+2. **Read Error Uncorrected**
+
+3. **Write Error Corrected**
+
+4. **Write Error Uncorrected**
+
+5. **Verify Error Corrected**
+
+6. **Verify Error Uncorrected**
+
+7. **Temperature**
+
+For ATA devices:
+
+1. **Read Error Rate**
+
+2. **Seek Error Rate**
+
+3. **Soft Read Error Rate**
+
+4. **Write Error Rate**
+
+5. **SATA Interface Downshift**
+
+6. **UDMA CRC Error Count**
+
+7. **Throughput Performance**
+
+8. **Seek Time Performance**
+
+9. **Start/Stop Count**
+
+10. **Power-On Hours Count**
+
+11. **Power Cycle Count**
+
+12. **Unexpected Power Loss**
+
+13. **Spin-Up Time**
+
+14. **Spin-up Retries**
+
+15. **Calibration Retries**
+
+16. **Temperature**
+
+17. **Reallocated Sectors Count**
+
+18. **Reserved Block Count**
+
+19. **Program Fail Count**
+
+20. **Erase Fail Count**
+
+21. **Wear Leveller Worst Case Erase Count**
+
+22. **Unused Reserved NAND Blocks**
+
+23. **Reallocation Event Count**
+
+24. **Current Pending Sector Count**
+
+25. **Offline Uncorrectable Sector Count**
+
+26. **Percent Lifetime Used**
+
+## prerequisite
+
+`smartd` must be running with `-A` option to write smartd attribute information to files.
+
+For this you need to set `smartd_opts` (or `SMARTD_ARGS`, check _smartd.service_ content) in `/etc/default/smartmontools`:
+
+```
+# dump smartd attrs info every 600 seconds
+smartd_opts="-A /var/log/smartd/ -i 600"
+```
+
+You may need to create the smartd directory before smartd will write to it:
+
+```sh
+mkdir -p /var/log/smartd
+```
+
+Otherwise, all the smartd `.csv` files may get written to `/var/lib/smartmontools` (default location). See also <https://linux.die.net/man/8/smartd> for more info on the `-A --attributelog=PREFIX` command.
+
+`smartd` appends logs at every run. It's strongly recommended to use `logrotate` for smartd files.
+
+## Configuration
+
+Edit the `python.d/smartd_log.conf` configuration file using `edit-config` from the Netdata [config
+directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`.
+
+```bash
+cd /etc/netdata # Replace this path with your Netdata config directory, if different
+sudo ./edit-config python.d/smartd_log.conf
+```
+
+```yaml
+local:
+ log_path : '/var/log/smartd/'
+```
+
+If no configuration is given, module will attempt to read log files in `/var/log/smartd/` directory.
+
+---
+
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fsmartd_log%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)