diff options
Diffstat (limited to 'docs/Running-behind-apache.md')
| -rw-r--r-- | docs/Running-behind-apache.md | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/docs/Running-behind-apache.md b/docs/Running-behind-apache.md new file mode 100644 index 0000000..8810dc8 --- /dev/null +++ b/docs/Running-behind-apache.md @@ -0,0 +1,373 @@ +<!-- +title: "Netdata via apache's mod_proxy" +custom_edit_url: https://github.com/netdata/netdata/edit/master/docs/Running-behind-apache.md +--> + +# Netdata via apache's mod_proxy + +Below you can find instructions for configuring an apache server to: + +1. proxy a single Netdata via an HTTP and HTTPS virtual host +2. dynamically proxy any number of Netdata servers +3. add user authentication +4. adjust Netdata settings to get optimal results + +## Requirements + +Make sure your apache has installed `mod_proxy` and `mod_proxy_http`. + +On debian/ubuntu systems, install them with this: + +```sh +sudo apt-get install apache2 +``` + +Also make sure they are enabled: + +```sh +sudo a2enmod proxy +sudo a2enmod proxy_http +``` + +Ensure your rewrite module is enabled: + +```sh +sudo a2enmod rewrite +``` + +--- + +## Netdata on an existing virtual host + +On any **existing** and already **working** apache virtual host, you can redirect requests for URL `/netdata/` to one or more Netdata servers. + +### proxy one Netdata, running on the same server apache runs + +Add the following on top of any existing virtual host. It will allow you to access Netdata as `http://virtual.host/netdata/`. + +```conf +<VirtualHost *:80> + + RewriteEngine On + ProxyRequests Off + ProxyPreserveHost On + + <Proxy *> + Require all granted + </Proxy> + + # Local Netdata server accessed with '/netdata/', at localhost:19999 + ProxyPass "/netdata/" "http://localhost:19999/" connectiontimeout=5 timeout=30 keepalive=on + ProxyPassReverse "/netdata/" "http://localhost:19999/" + + # if the user did not give the trailing /, add it + # for HTTP (if the virtualhost is HTTP, use this) + RewriteRule ^/netdata$ http://%{HTTP_HOST}/netdata/ [L,R=301] + # for HTTPS (if the virtualhost is HTTPS, use this) + #RewriteRule ^/netdata$ https://%{HTTP_HOST}/netdata/ [L,R=301] + + # rest of virtual host config here + +</VirtualHost> +``` + +### proxy multiple Netdata running on multiple servers + +Add the following on top of any existing virtual host. It will allow you to access multiple Netdata as `http://virtual.host/netdata/HOSTNAME/`, where `HOSTNAME` is the hostname of any other Netdata server you have (to access the `localhost` Netdata, use `http://virtual.host/netdata/localhost/`). + +```conf +<VirtualHost *:80> + + RewriteEngine On + ProxyRequests Off + ProxyPreserveHost On + + <Proxy *> + Require all granted + </Proxy> + + # proxy any host, on port 19999 + ProxyPassMatch "^/netdata/([A-Za-z0-9\._-]+)/(.*)" "http://$1:19999/$2" connectiontimeout=5 timeout=30 keepalive=on + + # make sure the user did not forget to add a trailing / + # for HTTP (if the virtualhost is HTTP, use this) + RewriteRule "^/netdata/([A-Za-z0-9\._-]+)$" http://%{HTTP_HOST}/netdata/$1/ [L,R=301] + # for HTTPS (if the virtualhost is HTTPS, use this) + RewriteRule "^/netdata/([A-Za-z0-9\._-]+)$" https://%{HTTP_HOST}/netdata/$1/ [L,R=301] + + # rest of virtual host config here + +</VirtualHost> +``` + +> IMPORTANT<br/> +> The above config allows your apache users to connect to port 19999 on any server on your network. + +If you want to control the servers your users can connect to, replace the `ProxyPassMatch` line with the following. This allows only `server1`, `server2`, `server3` and `server4`. + +``` + ProxyPassMatch "^/netdata/(server1|server2|server3|server4)/(.*)" "http://$1:19999/$2" connectiontimeout=5 timeout=30 keepalive=on +``` + +## Netdata on a dedicated virtual host + +You can proxy Netdata through apache, using a dedicated apache virtual host. + +Create a new apache site: + +```sh +nano /etc/apache2/sites-available/netdata.conf +``` + +with this content: + +```conf +<VirtualHost *:80> + RewriteEngine On + ProxyRequests Off + ProxyPreserveHost On + + ServerName netdata.domain.tld + + <Proxy *> + Require all granted + </Proxy> + + ProxyPass "/" "http://localhost:19999/" connectiontimeout=5 timeout=30 keepalive=on + ProxyPassReverse "/" "http://localhost:19999/" + + ErrorLog ${APACHE_LOG_DIR}/netdata-error.log + CustomLog ${APACHE_LOG_DIR}/netdata-access.log combined +</VirtualHost> +``` + +Enable the VirtualHost: + +```sh +sudo a2ensite netdata.conf && service apache2 reload +``` + +## Netdata proxy in Plesk + +_Assuming the main goal is to make Netdata running in HTTPS._ + +1. Make a subdomain for Netdata on which you enable and force HTTPS - You can use a free Let's Encrypt certificate +2. Go to "Apache & nginx Settings", and in the following section, add: + +```conf +RewriteEngine on +RewriteRule (.*) http://localhost:19999/$1 [P,L] +``` + +3. Optional: If your server is remote, then just replace "localhost" with your actual hostname or IP, it just works. + +Repeat the operation for as many servers as you need. + +## Enable Basic Auth + +If you wish to add an authentication (user/password) to access your Netdata, do these: + +Install the package `apache2-utils`. On debian / ubuntu run `sudo apt-get install apache2-utils`. + +Then, generate password for user `netdata`, using `htpasswd -c /etc/apache2/.htpasswd netdata` + +**Apache 2.2 Example:**\ +Modify the virtual host with these: + +```conf + # replace the <Proxy *> section + <Proxy *> + Order deny,allow + Allow from all + </Proxy> + + # add a <Location /netdata/> section + <Location /netdata/> + AuthType Basic + AuthName "Protected site" + AuthUserFile /etc/apache2/.htpasswd + Require valid-user + Order deny,allow + Allow from all + </Location> +``` + +Specify `Location /` if Netdata is running on dedicated virtual host. + +**Apache 2.4 (dedicated virtual host) Example:** + +```conf +<VirtualHost *:80> + RewriteEngine On + ProxyRequests Off + ProxyPreserveHost On + + ServerName netdata.domain.tld + + <Proxy *> + AllowOverride None + AuthType Basic + AuthName "Protected site" + AuthUserFile /etc/apache2/.htpasswd + Require valid-user + </Proxy> + + ProxyPass "/" "http://localhost:19999/" connectiontimeout=5 timeout=30 keepalive=on + ProxyPassReverse "/" "http://localhost:19999/" + + ErrorLog ${APACHE_LOG_DIR}/netdata-error.log + CustomLog ${APACHE_LOG_DIR}/netdata-access.log combined +</VirtualHost> +``` + +Note: Changes are applied by reloading or restarting Apache. + +## Configuration of Content Security Policy + +If you want to enable CSP within your Apache, you should consider some special requirements of the headers. Modify your configuration like that: + +``` + Header always set Content-Security-Policy "default-src http: 'unsafe-inline' 'self' 'unsafe-eval'; script-src http: 'unsafe-inline' 'self' 'unsafe-eval'; style-src http: 'self' 'unsafe-inline'" +``` + +Note: Changes are applied by reloading or restarting Apache. + +## Using Netdata with Apache's `mod_evasive` module + +The `mod_evasive` Apache module helps system administrators protect their web server from brute force and distributed +denial of service attack (DDoS) attacks. + +Because Netdata sends a request to the web server for every chart update, it's normal to create 20-30 requests per +second, per client. If you're using `mod_evasive` on your Apache web server, this volume of requests will trigger the +module's protection, and your dashboard will become unresponsive. You may even begin to see 403 errors. + +To mitigate this issue, you will need to change the value of the `DOSPageCount` option in your `mod_evasive.conf` file, +which can typically be found at `/etc/httpd/conf.d/mod_evasive.conf` or `/etc/apache2/mods-enabled/evasive.conf`. + +The `DOSPageCount` option sets the limit of the number of requests from a single IP address for the same page per page +interval, which is usually 1 second. The default value is `2` requests per second. Clearly, Netdata's typical usage will +exceed that threshold, and `mod_evasive` will add your IP address to a blocklist. + +Our users have found success by setting `DOSPageCount` to `30`. Try this, and raise the value if you continue to see 403 +errors while accessing the dashboard. + +```conf +DOSPageCount 30 +``` + +Restart Apache with `sudo service apache2 restart`, or the appropriate method to restart services on your system, to +reload its configuration with your new values. + + +### Virtual host + +To adjust the `DOSPageCount` for a specific virtual host, open your virtual host config, which can be found at +`/etc/httpd/conf/sites-available/my-domain.conf` or `/etc/apache2/sites-available/my-domain.conf` and add the +following: + +```conf +<VirtualHost *:80> + ... + # Increase the DOSPageCount to prevent 403 errors and IP addresses being blocked. + <IfModule mod_evasive20.c> + DOSPageCount 30 + </IfModule> +</VirtualHost> +``` + +See issues [#2011](https://github.com/netdata/netdata/issues/2011) and +[#7658](https://github.com/netdata/netdata/issues/7568) for more information. + +# Netdata configuration + +You might edit `/etc/netdata/netdata.conf` to optimize your setup a bit. For applying these changes you need to restart Netdata. + +## Response compression + +If you plan to use Netdata exclusively via apache, you can gain some performance by preventing double compression of its output (Netdata compresses its response, apache re-compresses it) by editing `/etc/netdata/netdata.conf` and setting: + +``` +[web] + enable gzip compression = no +``` + +Once you disable compression at Netdata (and restart it), please verify you receive compressed responses from apache (it is important to receive compressed responses - the charts will be more snappy). + +## Limit direct access to Netdata + +You would also need to instruct Netdata to listen only on `localhost`, `127.0.0.1` or `::1`. + +``` +[web] + bind to = localhost +``` + +or + +``` +[web] + bind to = 127.0.0.1 +``` + +or + +``` +[web] + bind to = ::1 +``` + +--- + +You can also use a unix domain socket. This will also provide a faster route between apache and Netdata: + +``` +[web] + bind to = unix:/tmp/netdata.sock +``` + +Apache 2.4.24+ can not read from `/tmp` so create your socket in `/var/run/netdata` + +``` +[web] + bind to = unix:/var/run/netdata/netdata.sock +``` + +_note: Netdata v1.8+ support unix domain sockets_ + +At the apache side, prepend the 2nd argument to `ProxyPass` with `unix:/tmp/netdata.sock|`, like this: + +``` +ProxyPass "/netdata/" "unix:/tmp/netdata.sock|http://localhost:19999/" connectiontimeout=5 timeout=30 keepalive=on +``` + +--- + +If your apache server is not on localhost, you can set: + +``` +[web] + bind to = * + allow connections from = IP_OF_APACHE_SERVER +``` + +*note: Netdata v1.9+ support `allow connections from`* + +`allow connections from` accepts [Netdata simple patterns](/libnetdata/simple_pattern/README.md) to match against the connection IP address. + +## prevent the double access.log + +apache logs accesses and Netdata logs them too. You can prevent Netdata from generating its access log, by setting this in `/etc/netdata/netdata.conf`: + +``` +[global] + access log = none +``` + +## Troubleshooting mod_proxy + +Make sure the requests reach Netdata, by examining `/var/log/netdata/access.log`. + +1. if the requests do not reach Netdata, your apache does not forward them. +2. if the requests reach Netdata but the URLs are wrong, you have not re-written them properly. + +[](<>) |