diff options
Diffstat (limited to 'health/QUICKSTART.md')
| -rw-r--r-- | health/QUICKSTART.md | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/health/QUICKSTART.md b/health/QUICKSTART.md new file mode 100644 index 0000000..bc91caf --- /dev/null +++ b/health/QUICKSTART.md @@ -0,0 +1,143 @@ +<!-- +title: "Health quickstart" +custom_edit_url: https://github.com/netdata/netdata/edit/master/health/QUICKSTART.md +--> + +# Health quickstart + +In this quickstart guide, you'll learn the basics of editing health configuration files. With this knowledge, you +will be able to customize how and when Netdata triggers alarms based on the health and performance of your system or +infrastructure. + +To learn about more advanced health configurations, visit the [health reference guide](/health/REFERENCE.md). + +## Edit health configuration files + +You should [use `edit-config`](/docs/configure/nodes.md) to edit Netdata's health configuration files. `edit-config` +will open your system's default terminal editor for you to make your changes. Once you've saved and closed the editor, +`edit-config` will copy your edited file into `/etc/netdata/health.d/`, which will override the stock file in +`/usr/lib/netdata/conf.d/health.d/` and ensure your customizations are persistent between updates. + +For example, to edit the `cpu.conf` health configuration file, you would run: + +```bash +cd /etc/netdata/ # Replace with your Netdata configuration directory, if not /etc/netdata/ +./edit-config health.d/cpu.conf +``` + +Each health configuration file contains one or more health entities, which always begin with an `alarm:` or `template:` +line. You can edit these entities based on your needs. To make any changes live, be sure to [reload your health +configuration](#reload-health-configuration). + +## Reference Netdata's stock health configuration files + +While you should always [use `edit-config`](#edit-health-configuration-files), you might also want to view the stock +health configuration files Netdata ships with. Stock files can be useful as reference material, or to determine which +file you should edit with `edit-config`. + +By default, Netdata will put health configuration files in `/usr/lib/netdata/conf.d/health.d`. However, you can +double-check the location of these files by navigating to `http://NODE:19999/netdata.conf`, replacing `NODE` with the IP +address or hostname for your Agent dashboard, looking for the `stock health configuration directory` option. The value +here will show the correct path for your installation. + +```conf +[health] + ... + # stock health configuration directory = /usr/lib/netdata/conf.d/health.d +``` + +Navigate to the health configuration directory to see all the available files and open them for reading. + +```bash +cd /usr/lib/netdata/conf.d/health.d/ +ls +adaptec_raid.conf entropy.conf memory.conf squid.conf +am2320.conf fping.conf mongodb.conf stiebeleltron.conf +apache.conf fronius.conf mysql.conf swap.conf +... +``` + +> ⚠️ If you edit configuration files in your stock health configuration directory, Netdata will overwrite them during +> any updates. Please use `edit-config` as described in the [section above](#edit-health-configuration-files). + +## Write a new health entity + +While tuning existing alarms may work in some cases, you may need to write entirely new health entities based on how +your systems and applications work. + +To write a new health entity, let's create a new file inside of the `health.d/` directory. We'll name our file +`example.conf` for now. + +```bash +./edit-config health.d/example.conf +``` + +As an example, let's build a health entity that triggers an alarm your system's RAM usage goes above 80%. Copy and paste +the following into the editor: + +```yaml + alarm: ram_usage + on: system.ram +lookup: average -1m percentage of used + units: % + every: 1m + warn: $this > 80 + crit: $this > 90 + info: The percentage of RAM used by the system. +``` + +Let's look into each of the lines to see how they create a working health entity. + +- `alarm`: The name for your new entity. The name needs to follow these requirements: + - Any alphabet letter or number. + - The symbols `.` and `_`. + - Cannot be `chart name`, `dimension name`, `family name`, or `chart variable names`. +- `on`: Which chart the entity listens to. +- `lookup`: Which metrics the alarm monitors, the duration of time to monitor, and how to process the metrics into a + usable format. + - `average`: Calculate the average of all the metrics collected. + - `-1m`: Use metrics from 1 minute ago until now to calculate that average. + - `percentage`: Clarify that we're calculating a percentage of RAM usage. + - `of used`: Specify which dimension (`used`) on the `system.ram` chart you want to monitor with this entity. +- `units`: Use percentages rather than absolute units. +- `every`: How often to perform the `lookup` calculation to decide whether or not to trigger this alarm. +- `warn`/`crit`: The value at which Netdata should trigger a warning or critical alarm. +- `info`: A description of the alarm, which will appear in the dashboard and notifications. + +Let's put all these lines into a human-readable format. + +This health entity, named **ram_usage**, watches at the **system.ram** chart. It looks up the last **1 minute** of +metrics from the **used** dimension and calculates the **average** of all those metrics in a **percentage** format, +using a **% unit**. The entity performs this lookup **every minute**. If the average RAM usage percentage over the last +1 minute is **more than 80%**, the entity triggers a warning alarm. If the usage is **more than 90%**, the entity +triggers a critical alarm. + +Now that you've written a new health entity, you need to reload it to see it live on the dashboard. + +## Reload health configuration + +To make any changes to your health configuration live, you must reload Netdata's health monitoring system. To do that +without restarting all of Netdata, run the following: + +```bash +netdatacli reload-health +``` + +If you receive an error like `command not found`, this means that `netdatacli` is not installed in your `$PATH`. In that + case, you can reload only the health component by sending a `SIGUSR2` to Netdata: + +```bash +killall -USR2 netdata +``` +## What's next? + +To learn about all of Netdata's health configuration options, view the [reference guide](/health/REFERENCE.md) and +[daemon configuration](/daemon/config/README.md#health-section-options) for additional options available in the +`[health]` section of `netdata.conf`. + +Or, get guided insights into specific health configurations with our [health guides](/health/README.md#guides). + +Finally, move on to Netdata's [notification system](/health/notifications/README.md) to learn more about how Netdata can +let you know when the health of your systems or apps goes awry. + +[](<>) |