summaryrefslogtreecommitdiffstats
path: root/contrib/ldaptcl
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--contrib/ldaptcl/CHANGES30
-rw-r--r--contrib/ldaptcl/COPYRIGHT31
-rw-r--r--contrib/ldaptcl/Makefile.in196
-rw-r--r--contrib/ldaptcl/README67
-rwxr-xr-xcontrib/ldaptcl/configure4159
-rw-r--r--contrib/ldaptcl/configure.in218
-rwxr-xr-xcontrib/ldaptcl/install-sh119
-rw-r--r--contrib/ldaptcl/ldap.n395
-rw-r--r--contrib/ldaptcl/ldaperr.tcl54
-rw-r--r--contrib/ldaptcl/man.macros236
-rw-r--r--contrib/ldaptcl/neoXldap.c1470
-rw-r--r--contrib/ldaptcl/pkgIndex.tcl.in1
-rw-r--r--contrib/ldaptcl/tclAppInit.c140
-rw-r--r--contrib/ldaptcl/tkAppInit.c119
14 files changed, 7235 insertions, 0 deletions
diff --git a/contrib/ldaptcl/CHANGES b/contrib/ldaptcl/CHANGES
new file mode 100644
index 0000000..09e976c
--- /dev/null
+++ b/contrib/ldaptcl/CHANGES
@@ -0,0 +1,30 @@
+Package rersion 2.0:
+- Detects OpenLDAP 2.0 and builds correctly with it.
+- Increment major version to 2, library file to libldaptcl2.0.so.
+- Can now perform add/delete/replace modifications in a single command.
+- Replaced calls to TclX_WrongArgs with core Tcl_WrongNumArgs to reduce
+ dependency on Extended Tcl.
+- Wrap dereference search control with #ifdef LDAP_OPT_DEREF.
+- Deref during search should work.
+- Add protocol_version option to ldap init command.
+- Add LDAPTCL_PROTOCOL_VERSION_DEFAULT to allow specifying the default
+ protocol version used.
+- Add controlArray(timeout) to control timeouts during searches.
+- Add controlArray(cache) to control caching current search results.
+ (Experience has shown this to be not very useful or not working correctly.
+ Caching search results should probably be done in Ldaptcl rather than
+ letting the LDAP API do it.)
+- Add "compare" subcommand
+- Add experimental trap subcommand (undocumented -- use at your own risk).
+
+Package version 1.2:
+
+- Filter no longer a required controlArray member, defaults to objectclass=*.
+- Sets errorCode with LDAP macro string value (better to test than the more
+ human readable values).
+- Shorten minimum required characters for search scope definitions: now allows
+ "base", "one", and "sub". For the latter two, additional characters are
+ ignored.
+- Now compiles successfully with -devel branch.
+- Client cache management code enabled for OpenLDAP versions <= 1.2.4. (This
+ code is relatively untested and feedback is welcome.)
diff --git a/contrib/ldaptcl/COPYRIGHT b/contrib/ldaptcl/COPYRIGHT
new file mode 100644
index 0000000..5ed13d7
--- /dev/null
+++ b/contrib/ldaptcl/COPYRIGHT
@@ -0,0 +1,31 @@
+Copyright 1998-2021 The OpenLDAP Foundation. All rights reserved.
+
+COPYING RESTRICTIONS APPLY.
+
+See COPYRIGHT and LICENSE files in the top-level directory of this
+distribution (i.e., ../../COPYRIGHT and ../../LICENSE, respectively).
+
+---
+NeoSoft Tcl client extensions to Lightweight Directory Access Protocol.
+
+Copyright (c) 1998-1999 NeoSoft, Inc.
+All Rights Reserved.
+
+This software may be used, modified, copied, distributed, and sold,
+in both source and binary form provided that these copyrights are
+retained and their terms are followed.
+
+Under no circumstances are the authors or NeoSoft Inc. responsible
+for the proper functioning of this software, nor do the authors
+assume any liability for damages incurred with its use.
+
+Redistribution and use in source and binary forms are permitted
+provided that this notice is preserved and that due credit is given
+to NeoSoft, Inc.
+
+NeoSoft, Inc. may not be used to endorse or promote products derived
+from this software without specific prior written permission. This
+software is provided ``as is'' without express or implied warranty.
+
+Requests for permission may be sent to NeoSoft Inc, 1770 St. James Place,
+Suite 500, Houston, TX, 77056.
diff --git a/contrib/ldaptcl/Makefile.in b/contrib/ldaptcl/Makefile.in
new file mode 100644
index 0000000..a66c745
--- /dev/null
+++ b/contrib/ldaptcl/Makefile.in
@@ -0,0 +1,196 @@
+#
+# This file is a Makefile for Neo, the NeoSoft extensions to Tcl.
+# If it has the name "Makefile.in" then it is a template for a
+# Makefile; to generate the actual Makefile, run "./configure",
+# which is a configuration script generated by the "autoconf" program
+# (constructs like "@foo@" will get replaced in the actual Makefile.
+#
+
+VERSION = @NEO_VERSION@
+LIBNAME = @NEO_SHARED_LIB_FILE@
+
+# Default top-level directories in which to install architecture-
+# specific files (exec_prefix) and machine-independent files such
+# as scripts (prefix). The values specified here may be overridden
+# at configure-time with the --exec-prefix and --prefix options
+# to the "configure" script.
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+# The following definition can be set to non-null for special systems
+# like AFS with replication. It allows the pathnames used for installation
+# to be different than those used for actually reference files at
+# run-time. DESTDIR is prepended to $prefix and $exec_prefix
+# when installing files.
+DESTDIR =
+
+# Directory in which to search for tcl libraries
+NEO_LIBRARY = $(exec_prefix)/lib/ldaptcl$(VERSION)
+
+# Directory in which to install the ldaptcl binary:
+BIN_INSTALL_DIR = $(DESTDIR)$(exec_prefix)/bin
+
+# Directory in which to install the .a or .so binary for the Neo library:
+LIB_INSTALL_DIR = $(DESTDIR)$(exec_prefix)/lib
+
+# Path to use at runtime to refer to LIB_INSTALL_DIR:
+LIB_RUNTIME_DIR = $(exec_prefix)/lib
+
+# Top-level directory for man entries:
+MANN_INSTALL_DIR = $(DESTDIR)$(prefix)/man/mann
+
+
+# The symbols below provide support for dynamic loading and shared
+# libraries. The values of the symbols are normally set by the
+# configure script. You shouldn't normally need to modify any of
+# these definitions by hand.
+
+SHLIB_CFLAGS = @NEO_SHLIB_CFLAGS@
+
+NEO_LIB_FILE = @NEO_LIB_FILE@
+
+NEO_SHARED_LIB_FILE = @NEO_SHARED_LIB_FILE@
+
+# The directory containing the Tcl sources and headers appropriate
+# for this version of Neo ("srcdir" will be replaced or has already
+# been replaced by the configure script):
+TCL_GENERIC_DIR = @TCL_SRC_DIR@/generic
+
+# The top of the TclX directory tree
+TCLX_TOP_DIR = @TCLX_TOP_DIR@
+
+# The directory where tclExtend.h will be:
+TCLX_TCL_GEN_DIR = ${TCLX_TOP_DIR}/tcl/generic
+
+# The directory where tclXunixPort.h will be:
+TCLX_TCL_UNIX_DIR = ${TCLX_TOP_DIR}/tcl/unix
+
+# The path to tclX the runtcl script:
+TCLX_RUNTCL = ${TCLX_TOP_DIR}/unix/runtcl
+
+# The directory containing the Tcl library archive file appropriate
+# for this version of Neo:
+TCL_BIN_DIR = @TCL_BIN_DIR@
+
+
+# The symbol below provides support for dynamic loading and shared
+# libraries. See configure.in for a description of what it means.
+# The values of the symbolis normally set by the configure script.
+
+SHLIB_LD = @SHLIB_LD@
+
+# Set to the options to include libldap.a and liblber.a
+# (eg. -L../tools/blah -lldap -llber)
+
+LDAP_LIBFLAGS = @ldaplibflags@
+LDAP_CFLAGS = @ldapinclude@
+LDAP_INCDIR = @ldapincdir@
+LDAP_BUILD = @ldapbuild@
+LDAP_DIR = @ldapdir@
+
+
+#----------------------------------------------------------------
+# The information below is modified by the configure script when
+# Makefile is generated from Makefile.in. You shouldn't normally
+# modify any of this stuff by hand.
+#----------------------------------------------------------------
+
+AC_FLAGS = @DEFS@
+INSTALL= @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+RANLIB = @RANLIB@
+SRC_DIR = @srcdir@/..
+TOP_DIR = @srcdir@/..
+GENERIC_DIR = $(TOP_DIR)/generic
+
+#----------------------------------------------------------------
+# The information below should be usable as is. The configure
+# script won't modify it and you shouldn't need to modify it
+# either.
+#----------------------------------------------------------------
+
+
+OBJS= neoXldap.o
+
+LIBDIR=$(exec_prefix)/lib
+INCDIR=$(prefix)/include
+
+LIBS= @LIBS@ @TCLX_LIB_SPEC@ @TCL_LIB_SPEC@ @TCL_LIBS@ $(LDAP_LIBFLAGS) -lc
+TK_LIBS=@TKX_LIB_SPEC@ @TK_LIB_SPEC@ @TK_LIBS@
+TK_VERSION=@TK_VERSION@
+
+CC = @CC@
+CC_SWITCHES = ${CFLAGS} @NEO_SHLIB_CFLAGS@ -I. \
+-I@prefix@/include ${AC_FLAGS} ${PROTO_FLAGS} \
+${SECURITY_FLAGS} ${MEM_DEBUG_FLAGS} ${KEYSYM_FLAGS} \
+-DNEO_LIBRARY=\"${NEO_LIBRARY}\" -DVERSION=\"${VERSION}\"
+
+TK_SWITCHES = ${CC_SWITCHES} @TK_XINCLUDES@
+
+.c.o:
+ $(CC) -c $(CC_SWITCHES) $<
+
+all: @NEO_LIB_FILE@ ldaptclsh @LDAPWISH@
+
+@NEO_LIB_FILE@: $(OBJS)
+ rm -f @NEO_LIB_FILE@
+ @MAKE_LIB@
+ $(RANLIB) @NEO_LIB_FILE@
+
+neoXldap.o: neoXldap.c ldaptclerr.h
+ $(CC) -c $(LDAP_CFLAGS) $(CC_SWITCHES) neoXldap.c
+
+ldaptclerr.h: ldaperr.tcl
+ tcl ldaperr.tcl $(LDAP_INCDIR)/ldap.h > ldaptclerr.h
+
+
+clean:
+ -rm -f ldaptclsh ldapwish
+ -rm -f *.o *.a *.so*
+
+distclean: clean
+ rm -f Makefile pkgIndex.tcl config.cache config.log config.status \
+ ldaptclerr.h
+
+install: install-binaries install-man
+
+install-binaries: @NEO_LIB_FILE@ ldaptclsh @LDAPWISH@
+ @-mkdir -p $(BIN_INSTALL_DIR)
+ $(INSTALL_PROGRAM) ldaptclsh $(BIN_INSTALL_DIR)/ldaptclsh
+ @if [ -n "@LDAPWISH@" ] ; then \
+ echo $(INSTALL_PROGRAM) ldapwish $(BIN_INSTALL_DIR)/ldapwish; \
+ $(INSTALL_PROGRAM) ldapwish $(BIN_INSTALL_DIR)/ldapwish; \
+ fi
+ $(INSTALL_DATA) @NEO_LIB_FILE@ $(LIB_INSTALL_DIR)
+ @if [ "$(NEO_LIB_FILE)" = "$(NEO_SHARED_LIB_FILE)" ] ; then \
+ echo Installing pkgIndex.tcl in $(NEO_LIBRARY); \
+ mkdir -p $(NEO_LIBRARY); \
+ $(INSTALL_DATA) pkgIndex.tcl $(NEO_LIBRARY); \
+ fi
+
+
+install-man:
+ @for i in ldap.n; \
+ do \
+ echo "Installing $$i"; \
+ rm -f $(MANN_INSTALL_DIR)/$$i; \
+ sed -e '/man\.macros/r man.macros' -e '/man\.macros/d' \
+ $$i > $(MANN_INSTALL_DIR)/$$i; \
+ chmod 444 $(MANN_INSTALL_DIR)/$$i; \
+ done;
+
+
+TCLOFILES= tclAppInit.o
+
+ldaptclsh:$(TCLOFILES) @NEO_LIB_FILE@
+ $(CC) @LD_FLAGS@ $(TCLOFILES) @NEO_BUILD_LIB_SPEC@ $(LIBS) \
+ @TCL_LD_SEARCH_FLAGS@ -o ldaptclsh
+
+tkAppInit.o: tkAppInit.c
+ $(CC) -c ${TK_SWITCHES} tkAppInit.c
+
+ldapwish:tkAppInit.o @NEO_LIB_FILE@
+ $(CC) @LD_FLAGS@ tkAppInit.o @NEO_BUILD_LIB_SPEC@ $(TK_LIBS) $(LIBS) \
+ @TCL_LD_SEARCH_FLAGS@ -o ldapwish
diff --git a/contrib/ldaptcl/README b/contrib/ldaptcl/README
new file mode 100644
index 0000000..0928d5f
--- /dev/null
+++ b/contrib/ldaptcl/README
@@ -0,0 +1,67 @@
+Copyright (c) 1998-1999 NeoSoft, Inc.
+
+For licensing information, see the file neoXldap.c and/or the COPYRIGHT
+file contained in the directory you found this file.
+
+This directory contains an extension to Tcl to interface with an
+LDAP server. While this software is being released to the OpenLDAP
+community, it is the authors' intention that support continue (and
+be added) for other client libraries as well. As time goes on, it
+is expected that code will converge rather than diverge.
+
+Support is provided for University of Michigan LDAP version 3.3,
+OpenLDAP, and Netscape. The default configuration supports
+OpenLDAP 1.2.4 and above.
+
+OpenLDAP 2.x is supported, but there is not yet any support for
+using SASL or TLS. There may be interface changes in the LDAP API
+which the author is unaware of (a leak was recently fixed for the
+return values of ldap_first/next_attribute() calls).
+
+It uses GNU autoconf. It builds and installs without requiring
+parallel directories, but it does require that Tcl and Extended Tcl
+are installed in the directory pointed to by --prefix (/usr/local
+by default).
+
+For further info, try "./configure --help".
+
+For example, I run:
+
+ ./configure --prefix=/opt/neotcl --enable-shared \
+ --with-ldap=/usr/local/ldap
+
+Remember that --prefix must be the same prefix used when building
+and installint Tcl.
+
+Netscape configuration has not been well tested, and you may have to
+play with the resulting Makefile to get it to work. In particular,
+you will probably need to modify the LDAP_LIBFLAGS. However, the
+C code itself is reasonably well tested with Netscape.
+
+This module will install a regular shell (ldaptclsh) a windowing
+shell (ldapwish) a library, a pkgIndex.tcl, and a manpage (ldap.n).
+
+If your Tcl installation has been configured with --enable-shared,
+then you must also use --enable-shared here.
+
+Shared libraries and Tcl packages.
+
+If Tcl is built with --enable-shared, AND OpenLDAP (or another version
+for that matter) has been build to create -llber and -lldap as shared
+libaries, AND you build ldaptcl with --enable-shared, it should be
+possible to run a plain Tcl interpreter (eg. tclsh8.0) and do
+
+ package require Ldaptcl
+
+which will install the "ldap" command into the interpreter.
+
+You may need to set the LD_LIBRARY_PATH environment variable appropriately,
+or use -R or -W,-rpath ld command options to resolve the search for ldap
+and lber libraries.
+
+This package was test built on a Alpha OSF4.0e with the native C
+compiler.
+
+Please email comments or bug fixes to openldap-devel@OpenLDAP.org,
+or to kunkee@OpenLDAP.org. I would also like to know if you are
+using this interface, so I invite you to drop me an email if you do.
diff --git a/contrib/ldaptcl/configure b/contrib/ldaptcl/configure
new file mode 100755
index 0000000..890b4fd
--- /dev/null
+++ b/contrib/ldaptcl/configure
@@ -0,0 +1,4159 @@
+#! /bin/sh
+# From configure.in Id: 16b135293616700c63077e9a1a601681d4442fdd .
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.65.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="neoXldap.c"
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+NEO_VERSION
+NEO_SHLIB_CFLAGS
+NEO_MINOR_VERSION
+NEO_MAJOR_VERSION
+NEO_LIB_SPEC
+NEO_LIB_FILE
+NEO_UNSHARED_LIB_FILE
+NEO_SHARED_LIB_FILE
+NEO_LD_SEARCH_FLAGS
+NEO_BUILD_LIB_SPEC
+TCL_VERSION
+TCL_LIB_HNAME
+TCL_LD_SEARCH_FLAGS
+TCL_LIB_SPEC
+TCL_BIN_DIR
+TCL_SRC_DIR
+TCL_LIBS
+ITCL_LIB_SPEC
+TCLX_LIB_SPEC
+TCLX_TCL_DIR
+TCLX_TOP_DIR
+SHLIB_VERSION
+SHLIB_SUFFIX
+SHLIB_LD_LIBS
+SHLIB_LD
+SHLIB_CFLAGS
+MAKE_LIB
+MATH_LIBS
+LD_FLAGS
+DL_LIBS
+ldapincdir
+ldapdir
+ldapbuild
+ldapinclude
+ldaplibflags
+LDAPWISH
+TKX_LIB_SPEC
+TK_VERSION
+TK_XINCLUDES
+TK_LIB_SPEC
+TK_LIBS
+RANLIB
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_gcc
+with_tk
+with_x
+enable_shared
+with_ldap
+with_ldap_incdir
+with_ldap_libdir
+with_ldap_libraries
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-gcc allow use of gcc if available
+ --enable-shared build libldaptcl as a shared library
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-tk=DIR use Tk 8.0 binaries from DIR
+ --without-x do not build/install ldapwish
+ --with-ldap=<dir> common parent of ldap include and lib dirs
+ --with-ldap-incdir=<dir> path to ldap.h
+ --with-ldap-libdir=<dir> path to ldap and lber libs
+ --with-ldap-libflags=<libnames> -l flags for ldap libraries
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.65
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.65. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# $OpenLDAP$
+
+
+
+NEO_VERSION=2.0
+NEO_MAJOR_VERSION=2
+NEO_MINOR_VERSION=0
+VERSION=${NEO_VERSION}
+
+if test "${prefix}" = "NONE"; then
+ prefix=/usr/local
+fi
+if test "${exec_prefix}" = "NONE"; then
+ exec_prefix=$prefix
+fi
+
+# Check whether --enable-gcc was given.
+if test "${enable_gcc+set}" = set; then :
+ enableval=$enable_gcc; neo_ok=$enableval
+else
+ neo_ok=no
+fi
+
+if test "$neo_ok" = "yes"; then
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+ CC=${CC-cc}
+
+fi
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+if test ! -f $exec_prefix/lib/tclConfig.sh
+then
+ as_fn_error "Tcl must be installed first" "$LINENO" 5
+fi
+
+. $exec_prefix/lib/tclConfig.sh
+
+if test ! -f $exec_prefix/lib/tclxConfig.sh
+then
+ as_fn_error "Extended Tcl must be installed first" "$LINENO" 5
+fi
+. $exec_prefix/lib/tclxConfig.sh
+
+
+#--------------------------------------------------------------------
+# See if there was a command-line option for where Tk is; if
+# not, assume that its top-level directory is a sibling of ours.
+#--------------------------------------------------------------------
+
+
+# Check whether --with-tk was given.
+if test "${with_tk+set}" = set; then :
+ withval=$with_tk;
+else
+ with_tk=yes
+fi
+
+
+case "$with_tk" in
+ yes)
+ if test -f $exec_prefix/lib/tkConfig.sh &&
+ test -f $exec_prefix/lib/tkxConfig.sh
+ then
+ :
+ else
+ as_fn_error "Tk does not appear to be installed at $exec_prefix" "$LINENO" 5
+ fi
+ ;;
+ no) ;;
+ *) as_fn_error "Tk cannot be specified and must be in $exec_prefix" "$LINENO" 5
+ ;;
+esac
+
+
+# Check whether --with-x was given.
+if test "${with_x+set}" = set; then :
+ withval=$with_x;
+fi
+
+if test "$with_x" = "no"
+then
+ with_tk=no
+fi
+
+if test "$with_tk" != "no"
+then
+ LDAPWISH=ldapwish
+ . $exec_prefix/lib/tkConfig.sh
+ . $exec_prefix/lib/tkxConfig.sh
+fi
+
+
+
+
+
+
+
+#--------------------------------------------------------------------
+# Read in configuration information generated by Tcl for shared
+# libraries, and arrange for it to be substituted into our
+# Makefile.
+#--------------------------------------------------------------------
+
+CC=$TCL_CC
+SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
+SHLIB_LD=$TCL_SHLIB_LD
+SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
+SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
+SHLIB_VERSION=$TCL_SHLIB_VERSION
+DL_LIBS=$TCL_DL_LIBS
+LD_FLAGS=$TCL_LD_FLAGS
+NEO_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS
+
+eval "NEO_SHARED_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+eval "NEO_UNSHARED_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+
+#--------------------------------------------------------------------
+# The statements below define a collection of symbols related to
+# building libldap as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+# Warning: in order to use the following code for libldap and libdb versions,
+# the VERSION shell variable is modified, and then is restored after.
+
+# Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; ok=$enableval
+else
+ ok=no
+fi
+
+if test "$ok" = "yes" && test "${SHLIB_SUFFIX}" != ""; then
+ NEO_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
+ eval "NEO_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+ MAKE_LIB="\${SHLIB_LD} $TCL_LIB_HNAME -o ${NEO_LIB_FILE} \${OBJS} \${LDAP_LIBFLAGS}"
+ RANLIB=":"
+else
+ NEO_SHLIB_CFLAGS=""
+ eval "NEO_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+ MAKE_LIB="ar cr ${NEO_LIB_FILE} \${OBJS}"
+fi
+
+
+# Check whether --with-ldap was given.
+if test "${with_ldap+set}" = set; then :
+ withval=$with_ldap; neo_ldap=$withval
+ case $withval in
+ yes) ldapdir=/usr/local
+ ;;
+ no) ;;
+ *) ldapdir=$withval
+ neo_ldap=yes
+ ;;
+ esac
+
+else
+
+ neo_ldap=yes
+ ldapdir=/usr/local
+
+fi
+
+
+ldapincdir=$ldapdir/include
+
+# Check whether --with-ldap-incdir was given.
+if test "${with_ldap_incdir+set}" = set; then :
+ withval=$with_ldap_incdir; ldapincdir=$withval
+fi
+
+
+ldaplibdir=$ldapdir/lib
+
+# Check whether --with-ldap-libdir was given.
+if test "${with_ldap_libdir+set}" = set; then :
+ withval=$with_ldap_libdir; ldaplibdir=$withval
+fi
+
+
+
+# Check whether --with-ldap-libraries was given.
+if test "${with_ldap_libraries+set}" = set; then :
+ withval=$with_ldap_libraries; ldaplibflags="-L$ldaplibdir $withval"
+else
+ ldaplibflags="-L$ldaplibdir -lldap -llber"
+fi
+
+
+ldapinclude="-I$ldapincdir"
+
+ldapbuild=yes
+
+
+
+
+
+
+
+
+VERSION=${NEO_VERSION}
+# Note: in the following variable, it's important to use the absolute
+# path name of the Tcl directory rather than "..": this is because
+# AIX remembers this path and will attempt to use it at run-time to look
+# up the Tcl library.
+
+if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+ NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl${VERSION}"
+ NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl${VERSION}"
+else
+ NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl`echo ${VERSION} | tr -d .`"
+ NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl`echo ${VERSION} | tr -d .`"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile pkgIndex.tcl"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.65. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.65,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "pkgIndex.tcl") CONFIG_FILES="$CONFIG_FILES pkgIndex.tcl" ;;
+
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X " :F $CONFIG_FILES "
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+
+ esac
+
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/contrib/ldaptcl/configure.in b/contrib/ldaptcl/configure.in
new file mode 100644
index 0000000..f62975d
--- /dev/null
+++ b/contrib/ldaptcl/configure.in
@@ -0,0 +1,218 @@
+dnl This file is an input file used by the GNU "autoconf" program to
+dnl generate the file "configure", which is run during Tk installation
+dnl to configure the system for the local environment.
+AC_INIT(neoXldap.c)
+# $OpenLDAP$
+
+AC_REVISION([$Id: 16b135293616700c63077e9a1a601681d4442fdd $])
+
+NEO_VERSION=2.0
+NEO_MAJOR_VERSION=2
+NEO_MINOR_VERSION=0
+VERSION=${NEO_VERSION}
+
+if test "${prefix}" = "NONE"; then
+ prefix=/usr/local
+fi
+if test "${exec_prefix}" = "NONE"; then
+ exec_prefix=$prefix
+fi
+
+AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available],
+ [neo_ok=$enableval], [neo_ok=no])
+if test "$neo_ok" = "yes"; then
+ AC_PROG_CC
+else
+ CC=${CC-cc}
+AC_SUBST(CC)
+fi
+
+AC_PROG_INSTALL(install-sh)
+AC_PROG_RANLIB
+
+if test ! -f $exec_prefix/lib/tclConfig.sh
+then
+ AC_MSG_ERROR(Tcl must be installed first)
+fi
+
+. $exec_prefix/lib/tclConfig.sh
+
+if test ! -f $exec_prefix/lib/tclxConfig.sh
+then
+ AC_MSG_ERROR(Extended Tcl must be installed first)
+fi
+. $exec_prefix/lib/tclxConfig.sh
+
+
+#--------------------------------------------------------------------
+# See if there was a command-line option for where Tk is; if
+# not, assume that its top-level directory is a sibling of ours.
+#--------------------------------------------------------------------
+
+AC_ARG_WITH(tk, [ --with-tk=DIR use Tk 8.0 binaries from DIR],
+ , with_tk=yes)
+
+case "$with_tk" in
+ yes)
+ if test -f $exec_prefix/lib/tkConfig.sh &&
+ test -f $exec_prefix/lib/tkxConfig.sh
+ then
+ :
+ else
+ AC_MSG_ERROR(Tk does not appear to be installed at $exec_prefix)
+ fi
+ ;;
+ no) ;;
+ *) AC_MSG_ERROR(Tk cannot be specified and must be in $exec_prefix)
+ ;;
+esac
+
+AC_ARG_WITH(x, [ --without-x do not build/install ldapwish])
+if test "$with_x" = "no"
+then
+ with_tk=no
+fi
+
+if test "$with_tk" != "no"
+then
+ LDAPWISH=ldapwish
+ . $exec_prefix/lib/tkConfig.sh
+ . $exec_prefix/lib/tkxConfig.sh
+fi
+AC_SUBST(TK_LIBS)
+AC_SUBST(TK_LIB_SPEC)
+AC_SUBST(TK_XINCLUDES)
+AC_SUBST(TK_VERSION)
+AC_SUBST(TKX_LIB_SPEC)
+AC_SUBST(LDAPWISH)
+
+#--------------------------------------------------------------------
+# Read in configuration information generated by Tcl for shared
+# libraries, and arrange for it to be substituted into our
+# Makefile.
+#--------------------------------------------------------------------
+
+CC=$TCL_CC
+SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS
+SHLIB_LD=$TCL_SHLIB_LD
+SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS
+SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX
+SHLIB_VERSION=$TCL_SHLIB_VERSION
+DL_LIBS=$TCL_DL_LIBS
+LD_FLAGS=$TCL_LD_FLAGS
+NEO_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS
+
+eval "NEO_SHARED_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+eval "NEO_UNSHARED_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+
+#--------------------------------------------------------------------
+# The statements below define a collection of symbols related to
+# building libldap as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+# Warning: in order to use the following code for libldap and libdb versions,
+# the VERSION shell variable is modified, and then is restored after.
+
+AC_ARG_ENABLE(shared,
+ [ --enable-shared build libldaptcl as a shared library],
+ [ok=$enableval], [ok=no])
+if test "$ok" = "yes" && test "${SHLIB_SUFFIX}" != ""; then
+ NEO_SHLIB_CFLAGS="${SHLIB_CFLAGS}"
+ eval "NEO_LIB_FILE=libldaptcl${TCL_SHARED_LIB_SUFFIX}"
+ MAKE_LIB="\${SHLIB_LD} $TCL_LIB_HNAME -o ${NEO_LIB_FILE} \${OBJS} \${LDAP_LIBFLAGS}"
+ RANLIB=":"
+else
+ NEO_SHLIB_CFLAGS=""
+ eval "NEO_LIB_FILE=libldaptcl${TCL_UNSHARED_LIB_SUFFIX}"
+ MAKE_LIB="ar cr ${NEO_LIB_FILE} \${OBJS}"
+fi
+
+AC_ARG_WITH(ldap, [ --with-ldap=<dir> common parent of ldap include and lib dirs],
+ [neo_ldap=$withval
+ case $withval in
+ yes) ldapdir=/usr/local
+ ;;
+ no) ;;
+ *) ldapdir=$withval
+ neo_ldap=yes
+ ;;
+ esac
+ ], [
+ neo_ldap=yes
+ ldapdir=/usr/local
+ ])
+
+ldapincdir=$ldapdir/include
+AC_ARG_WITH(ldap-incdir, [ --with-ldap-incdir=<dir> path to ldap.h],
+ [ldapincdir=$withval])
+
+ldaplibdir=$ldapdir/lib
+AC_ARG_WITH(ldap-libdir, [ --with-ldap-libdir=<dir> path to ldap and lber libs],
+ [ldaplibdir=$withval])
+
+AC_ARG_WITH(ldap-libraries, [ --with-ldap-libflags=<libnames> -l flags for ldap libraries],
+ [ldaplibflags="-L$ldaplibdir $withval"],
+ [ldaplibflags="-L$ldaplibdir -lldap -llber"])
+
+ldapinclude="-I$ldapincdir"
+
+ldapbuild=yes
+
+AC_SUBST(ldaplibflags)
+AC_SUBST(ldapinclude)
+AC_SUBST(ldapbuild)
+AC_SUBST(ldapdir)
+AC_SUBST(ldapincdir)
+
+
+VERSION=${NEO_VERSION}
+# Note: in the following variable, it's important to use the absolute
+# path name of the Tcl directory rather than "..": this is because
+# AIX remembers this path and will attempt to use it at run-time to look
+# up the Tcl library.
+
+if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
+ NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl${VERSION}"
+ NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl${VERSION}"
+else
+ NEO_BUILD_LIB_SPEC="-L`pwd` -lldaptcl`echo ${VERSION} | tr -d .`"
+ NEO_LIB_SPEC="-L${exec_prefix}/lib -lldaptcl`echo ${VERSION} | tr -d .`"
+fi
+
+AC_SUBST(CC)
+AC_SUBST(LIBS)
+AC_SUBST(DL_LIBS)
+AC_SUBST(LD_FLAGS)
+AC_SUBST(MATH_LIBS)
+AC_SUBST(MAKE_LIB)
+AC_SUBST(SHLIB_CFLAGS)
+AC_SUBST(SHLIB_LD)
+AC_SUBST(SHLIB_LD_LIBS)
+AC_SUBST(SHLIB_SUFFIX)
+AC_SUBST(SHLIB_VERSION)
+AC_SUBST(TCLX_TOP_DIR)
+AC_SUBST(TCLX_TCL_DIR)
+AC_SUBST(TCLX_LIB_SPEC)
+AC_SUBST(ITCL_LIB_SPEC)
+AC_SUBST(TCL_LIBS)
+AC_SUBST(TCL_SRC_DIR)
+AC_SUBST(TCL_BIN_DIR)
+AC_SUBST(TCL_LIB_SPEC)
+AC_SUBST(TCL_LD_SEARCH_FLAGS)
+AC_SUBST(TCL_LIB_HNAME)
+AC_SUBST(TCL_SRC_DIR)
+AC_SUBST(TCL_VERSION)
+AC_SUBST(NEO_BUILD_LIB_SPEC)
+AC_SUBST(NEO_LD_SEARCH_FLAGS)
+AC_SUBST(NEO_SHARED_LIB_FILE)
+AC_SUBST(NEO_UNSHARED_LIB_FILE)
+AC_SUBST(NEO_LIB_FILE)
+AC_SUBST(NEO_LIB_SPEC)
+AC_SUBST(NEO_MAJOR_VERSION)
+AC_SUBST(NEO_MINOR_VERSION)
+AC_SUBST(NEO_SHLIB_CFLAGS)
+AC_SUBST(NEO_VERSION)
+dnl AC_SUBST(XINCLUDES)
+dnl AC_SUBST(XLIBSW)
+
+AC_OUTPUT(Makefile pkgIndex.tcl)
diff --git a/contrib/ldaptcl/install-sh b/contrib/ldaptcl/install-sh
new file mode 100755
index 0000000..0ff4b6a
--- /dev/null
+++ b/contrib/ldaptcl/install-sh
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+#
+# install - install a program, script, or datafile
+# This comes from X11R5; it is not part of GNU.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+
+instcmd="$mvprog"
+chmodcmd=""
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+fi
+
+if [ x"$dst" = x ]
+then
+ echo "install: no destination specified"
+ exit 1
+fi
+
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+if [ -d $dst ]
+then
+ dst="$dst"/`basename $src`
+fi
+
+# Make a temp file name in the proper directory.
+
+dstdir=`dirname $dst`
+dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+$doit $instcmd $src $dsttmp
+
+# and set any options; do chmod last to preserve setuid bits
+
+if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
+if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
+if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
+if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
+
+# Now rename the file to the real destination.
+
+$doit $rmcmd $dst
+$doit $mvcmd $dsttmp $dst
+
+
+exit 0
diff --git a/contrib/ldaptcl/ldap.n b/contrib/ldaptcl/ldap.n
new file mode 100644
index 0000000..cc0d2df
--- /dev/null
+++ b/contrib/ldaptcl/ldap.n
@@ -0,0 +1,395 @@
+'\"
+'\" Copyright (c) 1998 NeoSoft, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\"
+.so man.macros
+.TH ldap n "" Ldap "Ldap Tcl Extension"
+.BS
+'\" Note: do not modify the .SH NAME line immediately below!
+.SH NAME
+ldap \- connect to and query an LDAP server
+.SH SYNOPSIS
+\fBldap \fBopen \fR \fIcommand\fR \fIhostlist\fR
+.br
+\fBldap \fBinit \fR \fIcommand\fR \fIhostlist\fR ?protocol_version [2|3]?
+.br
+\fBldap \fBexplode ?-nonames|-list?\fR \fIdn\fR
+.br
+\fIcommand \fBsubcommand \fIoptions ...\fR
+.BE
+
+.SH OVERVIEW
+.PP
+A new command by the name of \fIcommand\fR will be created to access
+the LDAP database at \fIhostlist\fR. \fIhostlist\fR may contain elements
+of the format \fBhost:port\fR if a port other than the default LDAP port
+of 389 is required. The LDAP library will attempt to connect to each
+host in turn until it succeeds or exhausts the list.
+.PP
+The \fBexplode\fR form provides a means (via ldap_explode(3)) to explode a DN
+into its component parts. \fB-nonames\fR strips off the attribute names,
+and -list returns a list suitable for \fBarray set\fR.
+.PP
+Finally, the last form, described in more detail below, refers genericly
+to how the command created by the first two examples is used.
+.SH DESCRIPTION
+
+The Lightweight Directory Access Protocol provides TCP/IP access to
+X.500 directory services and/or to a stand-alone LDAP server.
+
+This code provides a Tcl interface to the
+Lightweight Directory Access Protocol package using the Netscape
+Software Development Kit. It can also be used with the freely
+redistributable University of
+Michigan (http://www.umich.edu/~rsug/ldap) version by defining the
+UMICH_LDAP macro during compilation.
+
+.SH CONNECTING TO AN LDAP SERVER
+
+To create an ldap interface entity, we use the "ldap" command.
+
+ ldap open foo foo.bar.com
+
+This opens a connection to a LDAP server on foo.bar.com, and makes
+a new Tcl command, foo, through which we will manipulate the interface
+and make queries to the remote LDAP server.
+
+ ldap init foo foo.bar.com
+
+Same as above, foo is created, but for "init", opening the connection is
+deferred until we actually try to do something.
+
+The init command also allows some optional values to be set for the connection.
+Currently, the only useful option is \fBprotocol_version\fR which take a
+single argument to specify to use LDAP protocol 2 or 3. This may be required
+when connecting to older LDAP server.
+
+For the purposes of this example, we're going to assume that "foo" is the
+command created by opening a connection using "ldap open".
+
+.SH BINDING
+
+After a connection is made to an LDAP server, an LDAP bind operation must
+be performed before other operations can be attempted over the connection.
+
+Both simple authentication and kerberos authentication are available.
+LDAP version 3 supports many new "SSL"-style authentication and encryption
+systems, which are not currently supported by the OpenLDAP v1.2 server, and
+hence by this interface package.
+
+Currently simple and kerberos-based authentication, are supported.
+
+To use LDAP and still have reasonable security in a networked,
+Internet/Intranet environment, secure shell can be used to setup
+secure, encrypted connections between client machines and the LDAP
+server, and between all LDAP nodes that might be used.
+
+To perform the LDAP "bind" operation:
+
+ foo bind simple dn password
+
+ foo bind kerberos_ldap
+ foo bind kerberos_dsa
+ foo bind kerberos_both
+
+It either returns nothing (success), or a Tcl error with appropriate error
+text.
+
+For example,
+
+ foo bind simple "cn=Manager,o=NeoSoft Inc,c=us" "secret"
+
+If you attempt to bind with one of the kerberos authentication types
+described above and your LDAP library was not built with KERBEROS
+defined, you will get an unknown auth type error.
+
+To unbind an LDAP connection previously bound with "bind":
+
+ foo unbind
+
+Note that unbinding also deletes the command (\fBfoo\fR in this case).
+Deleting the command has the same affect.
+
+The ability of the library to callback to the client, enabling re-binding
+while following referrals, is not currently supported.
+
+.SH DELETING OBJECTS
+
+To delete an object in the LDAP database, use
+
+ foo delete dn
+
+To rename an object to another relative distinguished name, use
+
+ foo rename_rdn dn rdn
+
+To rename an object to another relative distinguished name, leaving
+the old entry as some kind of attribute (FIX: not sure if this is
+right or how it works)
+
+ foo modify_rdn dn rdn
+
+
+.SH ADDING NEW OBJECTS
+
+ foo add dn attributePairList
+
+This creates a new distinguished name and defines zero or more attributes.
+
+"attributePairList" is a list of key-value pairs, the same as would
+be returned by "array get" if an array had been set up containing the
+key-value pairs.
+
+ foo add "cn=karl, ou=People, o=NeoSoft Inc, c=US" {cn karl ...}
+
+Some directory servers and/or their client SDKs will automatically
+add the leaf attribute value for you.
+
+Here is a more precise description of how an attributePairList looks:
+
+ {cn {karl {Karl Lehenbauer}} telephone 713-968-5800}
+
+Note here that two cn values, "karl" and "Karl Lehenbauer", are added.
+Is it an error to write:
+
+ {cn {Karl Lehenbauer}}
+
+Which adds two cn values, "Karl" and "Lehenbauer", when the intention
+was to give a single cn value of "Karl Lehenbauer". In real life, one
+finds oneself making prodigous use of the \fBlist\fR command rather than
+typing hard-coded lists.
+
+We have noticed that the Netscape server will automatically add the
+left-most rdn portion of the DN (ie. cn=karl), whereas the University
+of Michigan and OpenLDAP 1.2 versions do not.
+
+.SH ADDING, DELETING, AND REPLACING OBJECT ATTRIBUTES
+
+You can have multiple values for a given attribute in an LDAP object.
+These are represented in search results, through the Tcl interface,
+as a list.
+
+ foo add_attributes dn attributePairList
+
+This adds key-value pairs to an existing DN. If an attribute being
+added already exists, the new value will be appended to the list.
+If a particular value being added to an attribute already exists in
+the object a Tcl error is raised.
+
+ foo replace_attributes dn attributePairList
+
+This replaces the specified attributes in an existing DN, leaving
+unnamed ones untouched. Any previous values for the supplied attributes
+(if any) are discarded.
+
+ foo delete_attributes dn attributePairList
+
+This deletes attributes in the list. If an attribute "foo" has the
+value list {bar snap}, and you delete using the attributePairList "foo bar",
+"foo" will still have "snap".
+
+If you provide an empty string ("") for the value list,
+the entire attribute will be deleted.
+
+In Ldaptcl version 2.0, multiple operations may be combined into a single
+transaction, ie. as in:
+
+ foo add_attributes dn attributePairList replace attributePairList \
+ delete attributePairList
+
+.SH SEARCHING
+
+The Tcl interface to searching takes a control array, which contains
+a couple of mandatory key-value pairs, and can contain a number of
+optional key-value pairs as well, for controlling the search, a
+destination array, into which the specified attributes (or all attributes
+of matching DNs if none are specified) and values are stored.
+
+The "code" part is executed repeatedly, once for each DN matching the
+search criteria.
+
+.nf
+ foo search controlArray destArray code
+
+ Using data in the control array, a search is performed of the
+ LDAP server opened when foo was created. Possible elements
+ of the control array are enumerated blow.
+
+ controlArray(base) is the DN being searched from. (required)
+
+ controlArray(filter) contains the search criteria. (required)
+
+ controlArray(scope) must be "base", "one_level", or "subtree".
+ If not specified, scope defaults to "subtree".
+
+ controlArray(deref) must be "never", "search", "find", or "always"
+ If not specified, deref defaults to "never"
+
+ controlArray(attributes) is a list of attributes to be fetched.
+ If not specified, all attributes are fetched.
+
+ controlArray(timeout) a timeout value in seconds (may contain
+ fractional values -- extremely very small values are useful
+ for forcing timeout conditions to test timeouts).
+.fi
+
+For each matching record, destArray is populated with none,
+some or all attribute-value pairs as determined by the request and
+access control lists on the server.
+
+Note: There are some additional parameters that can be set, such as
+how long the synchronous version of the routines should wait before
+timing out, the interfaces for which are not available in the current
+version.
+
+.SH COMPARE
+
+ foo compare dn attribute value
+
+Interface to the ldap_compare_s() command.
+Compares the value of \fIattribute\fR in the object at \fIdn\fR to the
+\fIvalue\fR given in the command line. Returns an error if \fIdn\fR
+does not exist. Otherwise, a
+
+.SH CACHING (Note: Netscape clients do not have caching interfaces).
+
+The UMich and OpenLDAP client libraries offers the client application fairly
+fine-grained control of caching of results retrieved from searches,
+offering significant performance improvement and reduced
+network traffic.
+
+By default, the cache is disabled.
+
+To enable caching of data received from an LDAP connection,
+
+ foo cache enable timeout maxmem
+
+ ...where timeout is specified in seconds, and maxmem is the
+ maximum memory to be used for caching, in bytes.
+
+ If maxmem is 0, the cache size is restricted only by the timeout.
+
+ foo cache disable
+
+ ...temporarily inhibits use of the cache (while disabled, new requests
+ are not cached and the cache is not checked when returning results).
+
+ Disabling the cache does not delete its contents.
+
+ foo cache destroy
+
+ ...turns off caching and completely removes the cache from memory.
+
+ foo cache flush
+
+ ...deletes the entire cache contents, but does not affect
+ whether or not the cache is being used.
+
+ foo cache uncache dn
+
+ ...removes from the cache all request results that make reference
+ to the specified DN.
+
+ This should be used, for example, after doing an add_attributes,
+ delete_attributes, or replace_attributes (ldap_modify(3))
+ involving the requested DN. Generally this should not be needed,
+ as the Tcl interface automatically performs this operation on
+ any dn that is modified (add,replace,delete) while caching is
+ enabled.
+
+ foo cache no_errors
+
+ ...suppresses caching of any requests that result in an error.
+
+ foo cache size_errors
+
+ ...suppresses caching of any requests that result in an error,
+ except for requests resulting in "sizelimit exceeded", which
+ are cached. This is the default.
+
+ foo cache all_errors
+
+ ...enables caching of all requests, including those that result
+ in errors.
+
+.SH IMPLEMENTATION DECISIONS
+
+Because we used the new "Tcl object" C interfaces, this package only works
+with Tcl 8.0 or above.
+
+This package interfaces with the University of Michigan LDAP protocol
+package, version 3.3, and OpenLDAP version 1.2, both of which are
+implementations of version 2 of the LDAP protocol.
+
+Although an LDAP client (or server) could be written in native Tcl 8.0,
+as Tcl 8.0 and above can do binary I/O, and Tcl 8 and above have strings
+that are fully eight-bit clean, for a first implementation, to minimize
+compatibility problems, we created a C interface to the UMich LDAP library.
+
+A native Tcl implementation would be cool because we could bring the receiving
+of messages into the normal Tcl event loop and run the LDAP interface fully
+asynchronous.
+
+This implementation is blocking, and blocking only. That is to say that
+the Tcl event loop is frozen while the ldap routines are waiting on data.
+
+This could be fixed either by recoding all of the I/O in the LDAP library
+to use Tcl's I/O system instead, or by simply coding the LDAP interface in
+native Tcl, as mentioned above.
+
+Another advantage of coding in high-level Tcl, of course, is that the
+client would immediately be cross-platform to Windows and the Mac, as
+well as Unix.
+
+Binary data is not currently supported. It will probably be trivial to
+add, we just haven't dug into it yet.
+
+
+.SH FOR MORE INFORMATION
+
+This document principally describes how to use our Tcl interface to the
+LDAP library works.
+
+For more information on LDAP and the University of Michigan LDAP package,
+please visit the website mentioned above. The package includes substantial
+documentation in the form of UNIX manual pages, a SLAPD/SLURPD guide
+in Adobe Portable Document Format (pdf), and a number of Internet RFCs
+related to LDAP services.
+
+.SH AUTHORS
+It was written by Karl Lehenbauer, of NeoSoft, Inc., in August and
+September of 1997. Ldap explode, and numerous bug fixes and extensions
+by Randy Kunkee, also of NeoSoft, Inc., in 1998-1999.
+
+.SH KEYWORDS
+element, join, list, separator
+.SH BUGS
+The \fBldap init\fR syntax fails to return anything useful. Use
+\fBldap open\fR instead.
+
+\fBPackage require Ldaptcl\fR won't work unless the ldap and lber libraries
+are also shared, and ldaptcl.so is itself created with the correct flags
+(eg. -R for Solaris). In short there's a lot of details to make this part
+work, but it should work out of the box for Solaris. Other systems may
+require that LD_LIBRARY_PATH or other appropraite environment variables
+be set at build and/or runtime.
+
+An asynchronous interface should be provided with callbacks.
+
+We have never tested Kerberos authentication.
+
+It does not tolerate some illegal operations very well.
+
+It is possible to create empty attributes, ie. attributes which are present
+but have no value. This is done by deleting the attribute values rather
+than, eg. "foo delete_attributes dn {telephone {}}" which would delete
+the telephone attribute altogether. A search for presence of the attribute
+may return an object, and yet it may have no value. This interface presents
+such an object as not having the attribute at all (ie. you cannot tell).
+The Netscape SDK does this for you, so this makes the behavior consistent
+when using UMICH_LDAP.
+
+\--enable-netscape configuration support has not been tested and probably
+has bugs.
diff --git a/contrib/ldaptcl/ldaperr.tcl b/contrib/ldaptcl/ldaperr.tcl
new file mode 100644
index 0000000..e9f8568
--- /dev/null
+++ b/contrib/ldaptcl/ldaperr.tcl
@@ -0,0 +1,54 @@
+#
+# ldaperr.tcl: scan ldap.h for error return codes for initializing
+# errorCode table.
+#
+
+proc genstrings {path} {
+ set fp [open $path]
+ while {[gets $fp line] != -1 &&
+ ![string match "#define LDAP_SUCCESS*" $line]} { }
+ puts "/* This file automatically generated, hand edit at your own risk! */"
+ puts -nonewline "char *ldaptclerrorcode\[\] = {
+ NULL"
+ while {[gets $fp line] != -1} {
+ if {[clength $line] == 0 || [ctype space $line]} continue
+ if {[string match *typedef* $line]} break
+ if {![string match #define* $line]} continue
+ if {![string match "#define LDAP_*" $line]} continue
+ if {[string match "*LDAP_RANGE*" $line]} continue
+ if {[string match "*LDAP_API_RESULT*" $line]} continue
+ if {[string match {*\\} $line]} {
+ append line [gets $fp]
+ }
+ lassign $line define macro value
+ set ldap_errcode($macro) $value
+ }
+ #parray ldap_errcode
+ foreach i [array names ldap_errcode] {
+ set value $ldap_errcode($i)
+ #puts stderr "checking $value"
+ if [regexp {^[A-Z_]} $value] {
+ if [info exists ldap_errcode($value)] {
+ set value $ldap_errcode($value)
+ set ldap_errcode($i) $value
+ }
+ }
+ set ldap_errname($value) $i
+ }
+ set lasterr 0
+ foreach value [lsort -integer [array names ldap_errname]] {
+ incr lasterr
+ while {$lasterr < $value} {
+ puts -nonewline ",\n\tNULL"
+ incr lasterr
+ }
+ puts -nonewline ",\n\t\"$ldap_errname($value)\""
+ }
+ puts "\n};"
+ puts "#define LDAPTCL_MAXERR\t$value"
+}
+
+#cmdtrace on
+if !$tcl_interactive {
+ genstrings [lindex $argv 0]
+}
diff --git a/contrib/ldaptcl/man.macros b/contrib/ldaptcl/man.macros
new file mode 100644
index 0000000..3af2da9
--- /dev/null
+++ b/contrib/ldaptcl/man.macros
@@ -0,0 +1,236 @@
+'\" The definitions below are for supplemental macros used in Tcl/Tk
+'\" manual entries.
+'\"
+'\" .AP type name in/out ?indent?
+'\" Start paragraph describing an argument to a library procedure.
+'\" type is type of argument (int, etc.), in/out is either "in", "out",
+'\" or "in/out" to describe whether procedure reads or modifies arg,
+'\" and indent is equivalent to second arg of .IP (shouldn't ever be
+'\" needed; use .AS below instead)
+'\"
+'\" .AS ?type? ?name?
+'\" Give maximum sizes of arguments for setting tab stops. Type and
+'\" name are examples of largest possible arguments that will be passed
+'\" to .AP later. If args are omitted, default tab stops are used.
+'\"
+'\" .BS
+'\" Start box enclosure. From here until next .BE, everything will be
+'\" enclosed in one large box.
+'\"
+'\" .BE
+'\" End of box enclosure.
+'\"
+'\" .CS
+'\" Begin code excerpt.
+'\"
+'\" .CE
+'\" End code excerpt.
+'\"
+'\" .VS ?version? ?br?
+'\" Begin vertical sidebar, for use in marking newly-changed parts
+'\" of man pages. The first argument is ignored and used for recording
+'\" the version when the .VS was added, so that the sidebars can be
+'\" found and removed when they reach a certain age. If another argument
+'\" is present, then a line break is forced before starting the sidebar.
+'\"
+'\" .VE
+'\" End of vertical sidebar.
+'\"
+'\" .DS
+'\" Begin an indented unfilled display.
+'\"
+'\" .DE
+'\" End of indented unfilled display.
+'\"
+'\" .SO
+'\" Start of list of standard options for a Tk widget. The
+'\" options follow on successive lines, in four columns separated
+'\" by tabs.
+'\"
+'\" .SE
+'\" End of list of standard options for a Tk widget.
+'\"
+'\" .OP cmdName dbName dbClass
+'\" Start of description of a specific option. cmdName gives the
+'\" option's name as specified in the class command, dbName gives
+'\" the option's name in the option database, and dbClass gives
+'\" the option's class in the option database.
+'\"
+'\" .UL arg1 arg2
+'\" Print arg1 underlined, then print arg2 normally.
+'\"
+'\" SCCS: @(#) man.macros 1.9 97/08/22 18:50:59
+'\"
+'\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
+.if t .wh -1.3i ^B
+.nr ^l \n(.l
+.ad b
+'\" # Start an argument description
+.de AP
+.ie !"\\$4"" .TP \\$4
+.el \{\
+. ie !"\\$2"" .TP \\n()Cu
+. el .TP 15
+.\}
+.ie !"\\$3"" \{\
+.ta \\n()Au \\n()Bu
+\&\\$1 \\fI\\$2\\fP (\\$3)
+.\".b
+.\}
+.el \{\
+.br
+.ie !"\\$2"" \{\
+\&\\$1 \\fI\\$2\\fP
+.\}
+.el \{\
+\&\\fI\\$1\\fP
+.\}
+.\}
+..
+'\" # define tabbing values for .AP
+.de AS
+.nr )A 10n
+.if !"\\$1"" .nr )A \\w'\\$1'u+3n
+.nr )B \\n()Au+15n
+.\"
+.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
+.nr )C \\n()Bu+\\w'(in/out)'u+2n
+..
+.AS Tcl_Interp Tcl_CreateInterp in/out
+'\" # BS - start boxed text
+'\" # ^y = starting y location
+'\" # ^b = 1
+.de BS
+.br
+.mk ^y
+.nr ^b 1u
+.if n .nf
+.if n .ti 0
+.if n \l'\\n(.lu\(ul'
+.if n .fi
+..
+'\" # BE - end boxed text (draw box now)
+.de BE
+.nf
+.ti 0
+.mk ^t
+.ie n \l'\\n(^lu\(ul'
+.el \{\
+.\" Draw four-sided box normally, but don't draw top of
+.\" box if the box started on an earlier page.
+.ie !\\n(^b-1 \{\
+\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.el \}\
+\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
+.\}
+.\}
+.fi
+.br
+.nr ^b 0
+..
+'\" # VS - start vertical sidebar
+'\" # ^Y = starting y location
+'\" # ^v = 1 (for troff; for nroff this doesn't matter)
+.de VS
+.if !"\\$2"" .br
+.mk ^Y
+.ie n 'mc \s12\(br\s0
+.el .nr ^v 1u
+..
+'\" # VE - end of vertical sidebar
+.de VE
+.ie n 'mc
+.el \{\
+.ev 2
+.nf
+.ti 0
+.mk ^t
+\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
+.sp -1
+.fi
+.ev
+.\}
+.nr ^v 0
+..
+'\" # Special macro to handle page bottom: finish off current
+'\" # box/sidebar if in box/sidebar mode, then invoked standard
+'\" # page bottom macro.
+.de ^B
+.ev 2
+'ti 0
+'nf
+.mk ^t
+.if \\n(^b \{\
+.\" Draw three-sided box if this is the box's first page,
+.\" draw two sides but no top otherwise.
+.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
+.\}
+.if \\n(^v \{\
+.nr ^x \\n(^tu+1v-\\n(^Yu
+\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
+.\}
+.bp
+'fi
+.ev
+.if \\n(^b \{\
+.mk ^y
+.nr ^b 2
+.\}
+.if \\n(^v \{\
+.mk ^Y
+.\}
+..
+'\" # DS - begin display
+.de DS
+.RS
+.nf
+.sp
+..
+'\" # DE - end display
+.de DE
+.fi
+.RE
+.sp
+..
+'\" # SO - start of list of standard options
+.de SO
+.SH "STANDARD OPTIONS"
+.LP
+.nf
+.ta 4c 8c 12c
+.ft B
+..
+'\" # SE - end of list of standard options
+.de SE
+.fi
+.ft R
+.LP
+See the \\fBoptions\\fR manual entry for details on the standard options.
+..
+'\" # OP - start of full description for a single option
+.de OP
+.LP
+.nf
+.ta 4c
+Command-Line Name: \\fB\\$1\\fR
+Database Name: \\fB\\$2\\fR
+Database Class: \\fB\\$3\\fR
+.fi
+.IP
+..
+'\" # CS - begin code excerpt
+.de CS
+.RS
+.nf
+.ta .25i .5i .75i 1i
+..
+'\" # CE - end code excerpt
+.de CE
+.fi
+.RE
+..
+.de UL
+\\$1\l'|0\(ul'\\$2
+..
diff --git a/contrib/ldaptcl/neoXldap.c b/contrib/ldaptcl/neoXldap.c
new file mode 100644
index 0000000..b1ce03e
--- /dev/null
+++ b/contrib/ldaptcl/neoXldap.c
@@ -0,0 +1,1470 @@
+/*
+ * NeoSoft Tcl client extensions to Lightweight Directory Access Protocol.
+ *
+ * Copyright (c) 1998-1999 NeoSoft, Inc.
+ * All Rights Reserved.
+ *
+ * This software may be used, modified, copied, distributed, and sold,
+ * in both source and binary form provided that these copyrights are
+ * retained and their terms are followed.
+ *
+ * Under no circumstances are the authors or NeoSoft Inc. responsible
+ * for the proper functioning of this software, nor do the authors
+ * assume any liability for damages incurred with its use.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that this notice is preserved and that due credit is given
+ * to NeoSoft, Inc.
+ *
+ * NeoSoft, Inc. may not be used to endorse or promote products derived
+ * from this software without specific prior written permission. This
+ * software is provided ``as is'' without express or implied warranty.
+ *
+ * Requests for permission may be sent to NeoSoft Inc, 1770 St. James Place,
+ * Suite 500, Houston, TX, 77056.
+ *
+ * $OpenLDAP$
+ *
+ */
+
+/*
+ * This code was originally developed by Karl Lehenbauer to work with
+ * Umich-3.3 LDAP. It was debugged against the Netscape LDAP server
+ * and their much more reliable SDK, and again backported to the
+ * Umich-3.3 client code. The UMICH_LDAP define is used to include
+ * code that will work with the Umich-3.3 LDAP, but not with Netscape's
+ * SDK. OpenLDAP may support some of these, but they have not been tested.
+ * Currently supported by Randy Kunkee (kunkee@OpenLDAP.org).
+ */
+
+/*
+ * Add timeout to controlArray to set timeout for ldap_result.
+ * 4/14/99 - Randy
+ */
+
+#include "tclExtend.h"
+
+#include <lber.h>
+#include <ldap.h>
+#include <string.h>
+#include <sys/time.h>
+#include <math.h>
+
+/*
+ * Macros to do string compares. They pre-check the first character before
+ * checking of the strings are equal.
+ */
+
+#define STREQU(str1, str2) \
+ (((str1) [0] == (str2) [0]) && (strcmp (str1, str2) == 0))
+#define STRNEQU(str1, str2, n) \
+ (((str1) [0] == (str2) [0]) && (strncmp (str1, str2, n) == 0))
+
+/*
+ * The following section defines some common macros used by the rest
+ * of the code. It's ugly, and can use some work. This code was
+ * originally developed to work with Umich-3.3 LDAP. It was debugged
+ * against the Netscape LDAP server and the much more reliable SDK,
+ * and then again backported to the Umich-3.3 client code.
+ */
+#define OPEN_LDAP 1
+#if defined(OPEN_LDAP)
+ /* LDAP_API_VERSION must be defined per the current draft spec
+ ** it's value will be assigned RFC number. However, as
+ ** no RFC is defined, it's value is currently implementation
+ ** specific (though I would hope it's value is greater than 1823).
+ ** In OpenLDAP 2.x-devel, its 2000 + the draft number, ie 2002.
+ ** This section is for OPENLDAP.
+ */
+#ifndef LDAP_API_FEATURE_X_OPENLDAP
+#define ldap_memfree(p) free(p)
+#endif
+#ifdef LDAP_OPT_ERROR_NUMBER
+#define ldap_get_lderrno(ld) (ldap_get_option(ld, LDAP_OPT_ERROR_NUMBER, &lderrno), lderrno)
+#else
+#define ldap_get_lderrno(ld) (ld->ld_errno)
+#endif
+#define LDAP_ERR_STRING(ld) \
+ ldap_err2string(ldap_get_lderrno(ld))
+#elif defined( LDAP_OPT_SIZELIMIT )
+ /*
+ ** Netscape SDK w/ ldap_set_option, ldap_get_option
+ */
+#define LDAP_ERR_STRING(ld) \
+ ldap_err2string(ldap_get_lderrno(ldap))
+#else
+ /* U-Mich/OpenLDAP 1.x API */
+ /* RFC-1823 w/ changes */
+#define UMICH_LDAP 1
+#define ldap_memfree(p) free(p)
+#define ldap_ber_free(p, n) ber_free(p, n)
+#define ldap_value_free_len(bvals) ber_bvecfree(bvals)
+#define ldap_get_lderrno(ld) (ld->ld_errno)
+#define LDAP_ERR_STRING(ld) \
+ ldap_err2string(ld->ld_errno)
+#endif
+
+typedef struct ldaptclobj {
+ LDAP *ldap;
+ int caching; /* flag 1/0 if caching is enabled */
+ long timeout; /* timeout from last cache enable */
+ long maxmem; /* maxmem from last cache enable */
+ Tcl_Obj *trapCmdObj; /* error handler */
+ int *traplist; /* list of errorCodes to trap */
+ int flags;
+} LDAPTCL;
+
+
+#define LDAPTCL_INTERRCODES 0x001
+
+#include "ldaptclerr.h"
+
+static
+LDAP_SetErrorCode(LDAPTCL *ldaptcl, int code, Tcl_Interp *interp)
+{
+ char shortbuf[16];
+ char *errp;
+ int lderrno;
+
+ if (code == -1)
+ code = ldap_get_lderrno(ldaptcl->ldap);
+ if ((ldaptcl->flags & LDAPTCL_INTERRCODES) || code > LDAPTCL_MAXERR ||
+ ldaptclerrorcode[code] == NULL) {
+ sprintf(shortbuf, "0x%03x", code);
+ errp = shortbuf;
+ } else
+ errp = ldaptclerrorcode[code];
+
+ Tcl_SetErrorCode(interp, errp, NULL);
+ if (ldaptcl->trapCmdObj) {
+ int *i;
+ Tcl_Obj *cmdObj;
+ if (ldaptcl->traplist != NULL) {
+ for (i = ldaptcl->traplist; *i && *i != code; i++)
+ ;
+ if (*i == 0) return;
+ }
+ (void) Tcl_EvalObj(interp, ldaptcl->trapCmdObj);
+ }
+}
+
+static
+LDAP_ErrorStringToCode(Tcl_Interp *interp, char *s)
+{
+ int offset;
+ int code;
+
+ offset = (strncasecmp(s, "LDAP_", 5) == 0) ? 0 : 5;
+ for (code = 0; code < LDAPTCL_MAXERR; code++) {
+ if (!ldaptclerrorcode[code]) continue;
+ if (strcasecmp(s, ldaptclerrorcode[code]+offset) == 0)
+ return code;
+ }
+ Tcl_ResetResult(interp);
+ Tcl_AppendResult(interp, s, " is an invalid code", (char *) NULL);
+ return -1;
+}
+
+/*-----------------------------------------------------------------------------
+ * LDAP_ProcessOneSearchResult --
+ *
+ * Process one result return from an LDAP search.
+ *
+ * Paramaters:
+ * o interp - Tcl interpreter; Errors are returned in result.
+ * o ldap - LDAP structure pointer.
+ * o entry - LDAP message pointer.
+ * o destArrayNameObj - Name of Tcl array in which to store attributes.
+ * o evalCodeObj - Tcl_Obj pointer to code to eval against this result.
+ * Returns:
+ * o TCL_OK if processing succeeded..
+ * o TCL_ERROR if an error occured, with error message in interp.
+ *-----------------------------------------------------------------------------
+ */
+int
+LDAP_ProcessOneSearchResult (interp, ldap, entry, destArrayNameObj, evalCodeObj)
+ Tcl_Interp *interp;
+ LDAP *ldap;
+ LDAPMessage *entry;
+ Tcl_Obj *destArrayNameObj;
+ Tcl_Obj *evalCodeObj;
+{
+ char *attributeName;
+ Tcl_Obj *attributeNameObj;
+ Tcl_Obj *attributeDataObj;
+ int i;
+ BerElement *ber;
+ struct berval **bvals;
+ char *dn;
+ int lderrno;
+
+ Tcl_UnsetVar (interp, Tcl_GetStringFromObj (destArrayNameObj, NULL), 0);
+
+ dn = ldap_get_dn(ldap, entry);
+ if (dn != NULL) {
+ if (Tcl_SetVar2(interp, /* set dn */
+ Tcl_GetStringFromObj(destArrayNameObj, NULL),
+ "dn",
+ dn,
+ TCL_LEAVE_ERR_MSG) == NULL)
+ return TCL_ERROR;
+ ldap_memfree(dn);
+ }
+ attributeNameObj = Tcl_NewObj();
+ Tcl_IncrRefCount (attributeNameObj);
+
+ /* Note that attributeName below is allocated for OL2+ libldap, so it
+ must be freed with ldap_memfree(). Test below is admittedly a hack.
+ */
+
+ for (attributeName = ldap_first_attribute (ldap, entry, &ber);
+ attributeName != NULL;
+ attributeName = ldap_next_attribute(ldap, entry, ber)) {
+
+ bvals = ldap_get_values_len(ldap, entry, attributeName);
+
+ if (bvals != NULL) {
+ /* Note here that the U.of.M. ldap will return a null bvals
+ when the last attribute value has been deleted, but still
+ retains the attributeName. Even though this is documented
+ as an error, we ignore it to present a consistent interface
+ with Netscape's server
+ */
+ attributeDataObj = Tcl_NewObj();
+ Tcl_SetStringObj(attributeNameObj, attributeName, -1);
+#if LDAP_API_VERSION >= 2004
+ ldap_memfree(attributeName); /* free if newer API */
+#endif
+ for (i = 0; bvals[i] != NULL; i++) {
+ Tcl_Obj *singleAttributeValueObj;
+
+ singleAttributeValueObj = Tcl_NewStringObj(bvals[i]->bv_val, bvals[i]->bv_len);
+ if (Tcl_ListObjAppendElement (interp,
+ attributeDataObj,
+ singleAttributeValueObj)
+ == TCL_ERROR) {
+ ber_free(ber, 0);
+ return TCL_ERROR;
+ }
+ }
+
+ ldap_value_free_len(bvals);
+
+ if (Tcl_ObjSetVar2 (interp,
+ destArrayNameObj,
+ attributeNameObj,
+ attributeDataObj,
+ TCL_LEAVE_ERR_MSG) == NULL) {
+ return TCL_ERROR;
+ }
+ }
+ }
+ Tcl_DecrRefCount (attributeNameObj);
+ return Tcl_EvalObj (interp, evalCodeObj);
+}
+
+/*-----------------------------------------------------------------------------
+ * LDAP_PerformSearch --
+ *
+ * Perform an LDAP search.
+ *
+ * Paramaters:
+ * o interp - Tcl interpreter; Errors are returned in result.
+ * o ldap - LDAP structure pointer.
+ * o base - Base DN from which to perform search.
+ * o scope - LDAP search scope, must be one of LDAP_SCOPE_BASE,
+ * LDAP_SCOPE_ONELEVEL, or LDAP_SCOPE_SUBTREE.
+ * o attrs - Pointer to array of char * pointers of desired
+ * attribute names, or NULL for all attributes.
+ * o filtpatt LDAP filter pattern.
+ * o value Value to get sprintf'ed into filter pattern.
+ * o destArrayNameObj - Name of Tcl array in which to store attributes.
+ * o evalCodeObj - Tcl_Obj pointer to code to eval against this result.
+ * Returns:
+ * o TCL_OK if processing succeeded..
+ * o TCL_ERROR if an error occured, with error message in interp.
+ *-----------------------------------------------------------------------------
+ */
+int
+LDAP_PerformSearch (interp, ldaptcl, base, scope, attrs, filtpatt, value,
+ destArrayNameObj, evalCodeObj, timeout_p, all, sortattr)
+ Tcl_Interp *interp;
+ LDAPTCL *ldaptcl;
+ char *base;
+ int scope;
+ char **attrs;
+ char *filtpatt;
+ char *value;
+ Tcl_Obj *destArrayNameObj;
+ Tcl_Obj *evalCodeObj;
+ struct timeval *timeout_p;
+ int all;
+ char *sortattr;
+{
+ LDAP *ldap = ldaptcl->ldap;
+ char filter[BUFSIZ];
+ int resultCode;
+ int errorCode;
+ int abandon;
+ int tclResult = TCL_OK;
+ int msgid;
+ LDAPMessage *resultMessage = 0;
+ LDAPMessage *entryMessage = 0;
+ char *sortKey;
+
+ int lderrno;
+
+ sprintf(filter, filtpatt, value);
+
+ fflush(stderr);
+ if ((msgid = ldap_search (ldap, base, scope, filter, attrs, 0)) == -1) {
+ Tcl_AppendResult (interp,
+ "LDAP start search error: ",
+ LDAP_ERR_STRING(ldap),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, -1, interp);
+ return TCL_ERROR;
+ }
+
+ abandon = 0;
+ if (sortattr)
+ all = 1;
+ tclResult = TCL_OK;
+ while (!abandon) {
+ resultCode = ldap_result (ldap, msgid, all, timeout_p, &resultMessage);
+ if (resultCode != LDAP_RES_SEARCH_RESULT &&
+ resultCode != LDAP_RES_SEARCH_ENTRY)
+ break;
+
+ if (sortattr) {
+ sortKey = (strcasecmp(sortattr, "dn") == 0) ? NULL : sortattr;
+ ldap_sort_entries(ldap, &resultMessage, sortKey, strcasecmp);
+ }
+ entryMessage = ldap_first_entry(ldap, resultMessage);
+
+ while (entryMessage) {
+ tclResult = LDAP_ProcessOneSearchResult (interp,
+ ldap,
+ entryMessage,
+ destArrayNameObj,
+ evalCodeObj);
+ if (tclResult != TCL_OK) {
+ if (tclResult == TCL_CONTINUE) {
+ tclResult = TCL_OK;
+ } else if (tclResult == TCL_BREAK) {
+ tclResult = TCL_OK;
+ abandon = 1;
+ break;
+ } else if (tclResult == TCL_ERROR) {
+ char msg[100];
+ sprintf(msg, "\n (\"search\" body line %d)",
+ interp->errorLine);
+ Tcl_AddObjErrorInfo(interp, msg, -1);
+ abandon = 1;
+ break;
+ } else {
+ abandon = 1;
+ break;
+ }
+ }
+ entryMessage = ldap_next_entry(ldap, entryMessage);
+ }
+ if (resultCode == LDAP_RES_SEARCH_RESULT || all)
+ break;
+ if (resultMessage)
+ ldap_msgfree(resultMessage);
+ resultMessage = NULL;
+ }
+ if (abandon) {
+ if (resultMessage)
+ ldap_msgfree(resultMessage);
+ if (resultCode == LDAP_RES_SEARCH_ENTRY)
+ ldap_abandon(ldap, msgid);
+ return tclResult;
+ }
+ if (resultCode == -1) {
+ Tcl_ResetResult (interp);
+ Tcl_AppendResult (interp,
+ "LDAP result search error: ",
+ LDAP_ERR_STRING(ldap),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, -1, interp);
+ return TCL_ERROR;
+ }
+
+ if ((errorCode = ldap_result2error (ldap, resultMessage, 0))
+ != LDAP_SUCCESS) {
+ Tcl_ResetResult (interp);
+ Tcl_AppendResult (interp,
+ "LDAP search error: ",
+ ldap_err2string(errorCode),
+ (char *)NULL);
+ if (resultMessage)
+ ldap_msgfree(resultMessage);
+ LDAP_SetErrorCode(ldaptcl, errorCode, interp);
+ return TCL_ERROR;
+ }
+ if (resultMessage)
+ ldap_msgfree(resultMessage);
+ return tclResult;
+}
+
+/*-----------------------------------------------------------------------------
+ * NeoX_LdapTargetObjCmd --
+ *
+ * Implements the body of commands created by Neo_LdapObjCmd.
+ *
+ * Results:
+ * A standard Tcl result.
+ *
+ * Side effects:
+ * See the user documentation.
+ *-----------------------------------------------------------------------------
+ */
+int
+NeoX_LdapTargetObjCmd (clientData, interp, objc, objv)
+ ClientData clientData;
+ Tcl_Interp *interp;
+ int objc;
+ Tcl_Obj *CONST objv[];
+{
+ char *command;
+ char *subCommand;
+ LDAPTCL *ldaptcl = (LDAPTCL *)clientData;
+ LDAP *ldap = ldaptcl->ldap;
+ char *dn;
+ int is_add = 0;
+ int is_add_or_modify = 0;
+ int mod_op = 0;
+ char *m, *s, *errmsg;
+ int errcode;
+ int tclResult;
+ int lderrno; /* might be used by LDAP_ERR_STRING macro */
+
+ Tcl_Obj *resultObj = Tcl_GetObjResult (interp);
+
+ if (objc < 2) {
+ Tcl_WrongNumArgs (interp, 1, objv, "subcommand [args...]");
+ return TCL_ERROR;
+ }
+
+ command = Tcl_GetStringFromObj (objv[0], NULL);
+ subCommand = Tcl_GetStringFromObj (objv[1], NULL);
+
+ /* object bind authtype name password */
+ if (STREQU (subCommand, "bind")) {
+ char *binddn;
+ char *passwd;
+ int stringLength;
+ char *ldap_authString;
+ int ldap_authInt;
+
+ if (objc != 5) {
+ Tcl_WrongNumArgs (interp, 2, objv, "authtype dn passwd");
+ return TCL_ERROR;
+ }
+
+ ldap_authString = Tcl_GetStringFromObj (objv[2], NULL);
+
+ if (STREQU (ldap_authString, "simple")) {
+ ldap_authInt = LDAP_AUTH_SIMPLE;
+ }
+#ifdef UMICH_LDAP
+ else if (STREQU (ldap_authString, "kerberos_ldap")) {
+ ldap_authInt = LDAP_AUTH_KRBV41;
+ } else if (STREQU (ldap_authString, "kerberos_dsa")) {
+ ldap_authInt = LDAP_AUTH_KRBV42;
+ } else if (STREQU (ldap_authString, "kerberos_both")) {
+ ldap_authInt = LDAP_AUTH_KRBV4;
+ }
+#endif
+ else {
+ Tcl_AppendStringsToObj (resultObj,
+ "\"",
+ command,
+ " ",
+ subCommand,
+#ifdef UMICH_LDAP
+ "\" authtype must be one of \"simple\", ",
+ "\"kerberos_ldap\", \"kerberos_dsa\" ",
+ "or \"kerberos_both\"",
+#else
+ "\" authtype must be \"simple\", ",
+#endif
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+
+ binddn = Tcl_GetStringFromObj (objv[3], &stringLength);
+ if (stringLength == 0)
+ binddn = NULL;
+
+ passwd = Tcl_GetStringFromObj (objv[4], &stringLength);
+ if (stringLength == 0)
+ passwd = NULL;
+
+/* ldap_bind_s(ldap, dn, pw, method) */
+
+#ifdef UMICH_LDAP
+#define LDAP_BIND(ldap, dn, pw, method) \
+ ldap_bind_s(ldap, dn, pw, method)
+#else
+#define LDAP_BIND(ldap, dn, pw, method) \
+ ldap_simple_bind_s(ldap, dn, pw)
+#endif
+ if ((errcode = LDAP_BIND (ldap,
+ binddn,
+ passwd,
+ ldap_authInt)) != LDAP_SUCCESS) {
+
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP bind error: ",
+ ldap_err2string(errcode),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, errcode, interp);
+ return TCL_ERROR;
+ }
+ return TCL_OK;
+ }
+
+ if (STREQU (subCommand, "unbind")) {
+ if (objc != 2) {
+ Tcl_WrongNumArgs (interp, 2, objv, "");
+ return TCL_ERROR;
+ }
+
+ return Tcl_DeleteCommand(interp, Tcl_GetStringFromObj(objv[0], NULL));
+ }
+
+ /* object delete dn */
+ if (STREQU (subCommand, "delete")) {
+ if (objc != 3) {
+ Tcl_WrongNumArgs (interp, 2, objv, "dn");
+ return TCL_ERROR;
+ }
+
+ dn = Tcl_GetStringFromObj (objv [2], NULL);
+ if ((errcode = ldap_delete_s(ldap, dn)) != LDAP_SUCCESS) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP delete error: ",
+ ldap_err2string(errcode),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, errcode, interp);
+ return TCL_ERROR;
+ }
+ return TCL_OK;
+ }
+
+ /* object rename_rdn dn rdn */
+ /* object modify_rdn dn rdn */
+ if (STREQU (subCommand, "rename_rdn") || STREQU (subCommand, "modify_rdn")) {
+ char *rdn;
+ int deleteOldRdn;
+
+ if (objc != 4) {
+ Tcl_WrongNumArgs (interp, 2, objv, "dn rdn");
+ return TCL_ERROR;
+ }
+
+ dn = Tcl_GetStringFromObj (objv [2], NULL);
+ rdn = Tcl_GetStringFromObj (objv [3], NULL);
+
+ deleteOldRdn = (*subCommand == 'r');
+
+ if ((errcode = ldap_modrdn2_s (ldap, dn, rdn, deleteOldRdn)) != LDAP_SUCCESS) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP ",
+ subCommand,
+ " error: ",
+ ldap_err2string(errcode),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, errcode, interp);
+ return TCL_ERROR;
+ }
+ return TCL_OK;
+ }
+
+ /* object add dn attributePairList */
+ /* object add_attributes dn attributePairList */
+ /* object replace_attributes dn attributePairList */
+ /* object delete_attributes dn attributePairList */
+
+ if (STREQU (subCommand, "add")) {
+ is_add = 1;
+ is_add_or_modify = 1;
+ } else {
+ is_add = 0;
+ if (STREQU (subCommand, "add_attributes")) {
+ is_add_or_modify = 1;
+ mod_op = LDAP_MOD_ADD;
+ } else if (STREQU (subCommand, "replace_attributes")) {
+ is_add_or_modify = 1;
+ mod_op = LDAP_MOD_REPLACE;
+ } else if (STREQU (subCommand, "delete_attributes")) {
+ is_add_or_modify = 1;
+ mod_op = LDAP_MOD_DELETE;
+ }
+ }
+
+ if (is_add_or_modify) {
+ int result;
+ LDAPMod **modArray;
+ LDAPMod *mod;
+ char **valPtrs = NULL;
+ int attribObjc;
+ Tcl_Obj **attribObjv;
+ int valuesObjc;
+ Tcl_Obj **valuesObjv;
+ int nPairs, allPairs;
+ int i;
+ int j;
+ int pairIndex;
+ int modIndex;
+
+ Tcl_Obj *resultObj = Tcl_GetObjResult (interp);
+
+ if (objc < 4 || objc > 4 && is_add || is_add == 0 && objc&1) {
+ Tcl_AppendStringsToObj (resultObj,
+ "wrong # args: ",
+ Tcl_GetStringFromObj (objv [0], NULL),
+ " ",
+ subCommand,
+ " dn attributePairList",
+ (char *)NULL);
+ if (!is_add)
+ Tcl_AppendStringsToObj (resultObj,
+ " ?[add|delete|replace] attributePairList ...?", (char *)NULL);
+ return TCL_ERROR;
+ }
+
+ dn = Tcl_GetStringFromObj (objv [2], NULL);
+
+ allPairs = 0;
+ for (i = 3; i < objc; i += 2) {
+ if (Tcl_ListObjLength (interp, objv[i], &j) == TCL_ERROR)
+ return TCL_ERROR;
+ if (j & 1) {
+ Tcl_AppendStringsToObj (resultObj,
+ "attribute list does not contain an ",
+ "even number of key-value elements",
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+ allPairs += j / 2;
+ }
+
+ modArray = (LDAPMod **)malloc (sizeof(LDAPMod *) * (allPairs + 1));
+
+ pairIndex = 3;
+ modIndex = 0;
+
+ do {
+
+ if (Tcl_ListObjGetElements (interp, objv [pairIndex], &attribObjc, &attribObjv)
+ == TCL_ERROR) {
+ mod_op = -1;
+ goto badop;
+ }
+
+ nPairs = attribObjc / 2;
+
+ for (i = 0; i < nPairs; i++) {
+ mod = modArray[modIndex++] = (LDAPMod *) malloc (sizeof(LDAPMod));
+ mod->mod_op = mod_op;
+ mod->mod_type = Tcl_GetStringFromObj (attribObjv [i * 2], NULL);
+
+ if (Tcl_ListObjGetElements (interp, attribObjv [i * 2 + 1], &valuesObjc, &valuesObjv) == TCL_ERROR) {
+ /* FIX: cleanup memory here */
+ mod_op = -1;
+ goto badop;
+ }
+
+ valPtrs = mod->mod_vals.modv_strvals = \
+ (char **)malloc (sizeof (char *) * (valuesObjc + 1));
+ valPtrs[valuesObjc] = (char *)NULL;
+
+ for (j = 0; j < valuesObjc; j++) {
+ valPtrs [j] = Tcl_GetStringFromObj (valuesObjv[j], NULL);
+
+ /* If it's "delete" and value is an empty string, make
+ * value be NULL to indicate entire attribute is to be
+ * deleted */
+ if ((*valPtrs [j] == '\0')
+ && (mod->mod_op == LDAP_MOD_DELETE || mod->mod_op == LDAP_MOD_REPLACE)) {
+ valPtrs [j] = NULL;
+ }
+ }
+ }
+
+ pairIndex += 2;
+ if (mod_op != -1 && pairIndex < objc) {
+ subCommand = Tcl_GetStringFromObj (objv[pairIndex - 1], NULL);
+ mod_op = -1;
+ if (STREQU (subCommand, "add")) {
+ mod_op = LDAP_MOD_ADD;
+ } else if (STREQU (subCommand, "replace")) {
+ mod_op = LDAP_MOD_REPLACE;
+ } else if (STREQU (subCommand, "delete")) {
+ mod_op = LDAP_MOD_DELETE;
+ }
+ if (mod_op == -1) {
+ Tcl_SetStringObj (resultObj,
+ "Additional operators must be one of"
+ " add, replace, or delete", -1);
+ mod_op = -1;
+ goto badop;
+ }
+ }
+
+ } while (mod_op != -1 && pairIndex < objc);
+ modArray[modIndex] = (LDAPMod *) NULL;
+
+ if (is_add) {
+ result = ldap_add_s (ldap, dn, modArray);
+ } else {
+ result = ldap_modify_s (ldap, dn, modArray);
+ if (ldaptcl->caching)
+ ldap_uncache_entry (ldap, dn);
+ }
+
+ /* free the modArray elements, then the modArray itself. */
+badop:
+ for (i = 0; i < modIndex; i++) {
+ free ((char *) modArray[i]->mod_vals.modv_strvals);
+ free ((char *) modArray[i]);
+ }
+ free ((char *) modArray);
+
+ /* after modArray is allocated, mod_op = -1 upon error for cleanup */
+ if (mod_op == -1)
+ return TCL_ERROR;
+
+ /* FIX: memory cleanup required all over the place here */
+ if (result != LDAP_SUCCESS) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP ",
+ subCommand,
+ " error: ",
+ ldap_err2string(result),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, result, interp);
+ return TCL_ERROR;
+ }
+ return TCL_OK;
+ }
+
+ /* object search controlArray dn pattern */
+ if (STREQU (subCommand, "search")) {
+ char *controlArrayName;
+ Tcl_Obj *controlArrayNameObj;
+
+ char *scopeString;
+ int scope;
+
+ char *derefString;
+ int deref;
+
+ char *baseString;
+
+ char **attributesArray;
+ char *attributesString;
+ int attributesArgc;
+
+ char *filterPatternString;
+
+ char *timeoutString;
+ double timeoutTime;
+ struct timeval timeout, *timeout_p;
+
+ char *paramString;
+ int cacheThis = -1;
+ int all = 0;
+
+ char *sortattr;
+
+ Tcl_Obj *destArrayNameObj;
+ Tcl_Obj *evalCodeObj;
+
+ if (objc != 5) {
+ Tcl_WrongNumArgs (interp, 2, objv,
+ "controlArray destArray code");
+ return TCL_ERROR;
+ }
+
+ controlArrayNameObj = objv [2];
+ controlArrayName = Tcl_GetStringFromObj (controlArrayNameObj, NULL);
+
+ destArrayNameObj = objv [3];
+
+ evalCodeObj = objv [4];
+
+ baseString = Tcl_GetVar2 (interp,
+ controlArrayName,
+ "base",
+ 0);
+
+ if (baseString == (char *)NULL) {
+ Tcl_AppendStringsToObj (resultObj,
+ "required element \"base\" ",
+ "is missing from ldap control array \"",
+ controlArrayName,
+ "\"",
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+
+ filterPatternString = Tcl_GetVar2 (interp,
+ controlArrayName,
+ "filter",
+ 0);
+ if (filterPatternString == (char *)NULL) {
+ filterPatternString = "(objectclass=*)";
+ }
+
+ /* Fetch scope setting from control array.
+ * If it doesn't exist, default to subtree scoping.
+ */
+ scopeString = Tcl_GetVar2 (interp, controlArrayName, "scope", 0);
+ if (scopeString == NULL) {
+ scope = LDAP_SCOPE_SUBTREE;
+ } else {
+ if (STREQU(scopeString, "base"))
+ scope = LDAP_SCOPE_BASE;
+ else if (STRNEQU(scopeString, "one", 3))
+ scope = LDAP_SCOPE_ONELEVEL;
+ else if (STRNEQU(scopeString, "sub", 3))
+ scope = LDAP_SCOPE_SUBTREE;
+ else {
+ Tcl_AppendStringsToObj (resultObj,
+ "\"scope\" element of \"",
+ controlArrayName,
+ "\" array is not one of ",
+ "\"base\", \"onelevel\", ",
+ "or \"subtree\"",
+ (char *) NULL);
+ return TCL_ERROR;
+ }
+ }
+
+#ifdef LDAP_OPT_DEREF
+ /* Fetch dereference control setting from control array.
+ * If it doesn't exist, default to never dereference. */
+ derefString = Tcl_GetVar2 (interp,
+ controlArrayName,
+ "deref",
+ 0);
+ if (derefString == (char *)NULL) {
+ deref = LDAP_DEREF_NEVER;
+ } else {
+ if (STREQU(derefString, "never"))
+ deref = LDAP_DEREF_NEVER;
+ else if (STREQU(derefString, "search"))
+ deref = LDAP_DEREF_SEARCHING;
+ else if (STREQU(derefString, "find"))
+ deref = LDAP_DEREF_FINDING;
+ else if (STREQU(derefString, "always"))
+ deref = LDAP_DEREF_ALWAYS;
+ else {
+ Tcl_AppendStringsToObj (resultObj,
+ "\"deref\" element of \"",
+ controlArrayName,
+ "\" array is not one of ",
+ "\"never\", \"search\", \"find\", ",
+ "or \"always\"",
+ (char *) NULL);
+ return TCL_ERROR;
+ }
+ }
+#endif
+
+ /* Fetch list of attribute names from control array.
+ * If entry doesn't exist, default to NULL (all).
+ */
+ attributesString = Tcl_GetVar2 (interp,
+ controlArrayName,
+ "attributes",
+ 0);
+ if (attributesString == (char *)NULL) {
+ attributesArray = NULL;
+ } else {
+ if ((Tcl_SplitList (interp,
+ attributesString,
+ &attributesArgc,
+ &attributesArray)) != TCL_OK) {
+ return TCL_ERROR;
+ }
+ }
+
+ /* Fetch timeout value if there is one
+ */
+ timeoutString = Tcl_GetVar2 (interp,
+ controlArrayName,
+ "timeout",
+ 0);
+ timeout.tv_usec = 0;
+ if (timeoutString == (char *)NULL) {
+ timeout_p = NULL;
+ timeout.tv_sec = 0;
+ } else {
+ if (Tcl_GetDouble(interp, timeoutString, &timeoutTime) != TCL_OK)
+ return TCL_ERROR;
+ timeout.tv_sec = floor(timeoutTime);
+ timeout.tv_usec = (timeoutTime-timeout.tv_sec) * 1000000;
+ timeout_p = &timeout;
+ }
+
+ paramString = Tcl_GetVar2 (interp, controlArrayName, "cache", 0);
+ if (paramString) {
+ if (Tcl_GetInt(interp, paramString, &cacheThis) == TCL_ERROR)
+ return TCL_ERROR;
+ }
+
+ paramString = Tcl_GetVar2 (interp, controlArrayName, "all", 0);
+ if (paramString) {
+ if (Tcl_GetInt(interp, paramString, &all) == TCL_ERROR)
+ return TCL_ERROR;
+ }
+
+ sortattr = Tcl_GetVar2 (interp, controlArrayName, "sort", 0);
+
+#ifdef UMICH_LDAP
+ ldap->ld_deref = deref;
+ ldap->ld_timelimit = 0;
+ ldap->ld_sizelimit = 0;
+ ldap->ld_options = 0;
+#endif
+
+ /* Caching control within the search: if the "cache" control array */
+ /* value is set, disable/enable caching accordingly */
+
+#if 0
+ if (cacheThis >= 0 && ldaptcl->caching != cacheThis) {
+ if (cacheThis) {
+ if (ldaptcl->timeout == 0) {
+ Tcl_SetStringObj(resultObj, "Caching never before enabled, I have no timeout value to use", -1);
+ return TCL_ERROR;
+ }
+ ldap_enable_cache(ldap, ldaptcl->timeout, ldaptcl->maxmem);
+ }
+ else
+ ldap_disable_cache(ldap);
+ }
+#endif
+
+#ifdef LDAP_OPT_DEREF
+ ldap_set_option(ldap, LDAP_OPT_DEREF, &deref);
+#endif
+
+ tclResult = LDAP_PerformSearch (interp,
+ ldaptcl,
+ baseString,
+ scope,
+ attributesArray,
+ filterPatternString,
+ "",
+ destArrayNameObj,
+ evalCodeObj,
+ timeout_p,
+ all,
+ sortattr);
+ /* Following the search, if we changed the caching behavior, change */
+ /* it back. */
+#if 0
+ if (cacheThis >= 0 && ldaptcl->caching != cacheThis) {
+ if (cacheThis)
+ ldap_disable_cache(ldap);
+ else
+ ldap_enable_cache(ldap, ldaptcl->timeout, ldaptcl->maxmem);
+ }
+#ifdef LDAP_OPT_DEREF
+ deref = LDAP_DEREF_NEVER;
+ ldap_set_option(ldap, LDAP_OPT_DEREF, &deref);
+#endif
+#endif
+ return tclResult;
+ }
+
+ /* object compare dn attr value */
+ if (STREQU (subCommand, "compare")) {
+ char *dn;
+ char *attr;
+ char *value;
+ int result;
+ int lderrno;
+
+ if (objc != 5) {
+ Tcl_WrongNumArgs (interp,
+ 2, objv,
+ "dn attribute value");
+ return TCL_ERROR;
+ }
+
+ dn = Tcl_GetStringFromObj (objv[2], NULL);
+ attr = Tcl_GetStringFromObj (objv[3], NULL);
+ value = Tcl_GetStringFromObj (objv[4], NULL);
+
+ result = ldap_compare_s (ldap, dn, attr, value);
+ if (result == LDAP_COMPARE_TRUE || result == LDAP_COMPARE_FALSE) {
+ Tcl_SetBooleanObj(resultObj, result == LDAP_COMPARE_TRUE);
+ return TCL_OK;
+ }
+ LDAP_SetErrorCode(ldaptcl, result, interp);
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP compare error: ",
+ LDAP_ERR_STRING(ldap),
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+
+ if (STREQU (subCommand, "cache")) {
+#if defined(UMICH_LDAP) || (defined(OPEN_LDAP) && !defined(LDAP_API_VERSION))
+ char *cacheCommand;
+
+ if (objc < 3) {
+ badargs:
+ Tcl_WrongNumArgs (interp, 2, objv [0], "command [args...]");
+ return TCL_ERROR;
+ }
+
+ cacheCommand = Tcl_GetStringFromObj (objv [2], NULL);
+
+ if (STREQU (cacheCommand, "uncache")) {
+ char *dn;
+
+ if (objc != 4) {
+ Tcl_WrongNumArgs (interp,
+ 3, objv,
+ "dn");
+ return TCL_ERROR;
+ }
+
+ dn = Tcl_GetStringFromObj (objv [3], NULL);
+ ldap_uncache_entry (ldap, dn);
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "enable")) {
+ long timeout = ldaptcl->timeout;
+ long maxmem = ldaptcl->maxmem;
+
+ if (objc > 5) {
+ Tcl_WrongNumArgs (interp, 3, objv, "?timeout? ?maxmem?");
+ return TCL_ERROR;
+ }
+
+ if (objc > 3) {
+ if (Tcl_GetLongFromObj (interp, objv [3], &timeout) == TCL_ERROR)
+ return TCL_ERROR;
+ }
+ if (timeout == 0) {
+ Tcl_SetStringObj(resultObj,
+ objc > 3 ? "timeouts must be greater than 0" :
+ "no previous timeout to reference", -1);
+ return TCL_ERROR;
+ }
+
+ if (objc > 4)
+ if (Tcl_GetLongFromObj (interp, objv [4], &maxmem) == TCL_ERROR)
+ return TCL_ERROR;
+
+ if (ldap_enable_cache (ldap, timeout, maxmem) == -1) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP cache enable error: ",
+ LDAP_ERR_STRING(ldap),
+ (char *)NULL);
+ LDAP_SetErrorCode(ldaptcl, -1, interp);
+ return TCL_ERROR;
+ }
+ ldaptcl->caching = 1;
+ ldaptcl->timeout = timeout;
+ ldaptcl->maxmem = maxmem;
+ return TCL_OK;
+ }
+
+ if (objc != 3) goto badargs;
+
+ if (STREQU (cacheCommand, "disable")) {
+ ldap_disable_cache (ldap);
+ ldaptcl->caching = 0;
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "destroy")) {
+ ldap_destroy_cache (ldap);
+ ldaptcl->caching = 0;
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "flush")) {
+ ldap_flush_cache (ldap);
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "no_errors")) {
+ ldap_set_cache_options (ldap, LDAP_CACHE_OPT_CACHENOERRS);
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "all_errors")) {
+ ldap_set_cache_options (ldap, LDAP_CACHE_OPT_CACHEALLERRS);
+ return TCL_OK;
+ }
+
+ if (STREQU (cacheCommand, "size_errors")) {
+ ldap_set_cache_options (ldap, 0);
+ return TCL_OK;
+ }
+ Tcl_AppendStringsToObj (resultObj,
+ "\"",
+ command,
+ " ",
+ subCommand,
+ "\" subcommand",
+ " must be one of \"enable\", ",
+ "\"disable\", ",
+ "\"destroy\", \"flush\", \"uncache\", ",
+ "\"no_errors\", \"size_errors\",",
+ " or \"all_errors\"",
+ (char *)NULL);
+ return TCL_ERROR;
+#else
+ return TCL_OK;
+#endif
+ }
+ if (STREQU (subCommand, "trap")) {
+ Tcl_Obj *listObj, *resultObj;
+ int *p, l, i, code;
+
+ if (objc > 4) {
+ Tcl_WrongNumArgs (interp, 2, objv,
+ "command ?errorCode-list?");
+ return TCL_ERROR;
+ }
+ if (objc == 2) {
+ if (!ldaptcl->trapCmdObj)
+ return TCL_OK;
+ resultObj = Tcl_NewListObj(0, NULL);
+ Tcl_ListObjAppendElement(interp, resultObj, ldaptcl->trapCmdObj);
+ if (ldaptcl->traplist) {
+ listObj = Tcl_NewObj();
+ for (p = ldaptcl->traplist; *p; p++) {
+ Tcl_ListObjAppendElement(interp, listObj,
+ Tcl_NewStringObj(ldaptclerrorcode[*p], -1));
+ }
+ Tcl_ListObjAppendElement(interp, resultObj, listObj);
+ }
+ Tcl_SetObjResult(interp, resultObj);
+ return TCL_OK;
+ }
+ if (ldaptcl->trapCmdObj) {
+ Tcl_DecrRefCount (ldaptcl->trapCmdObj);
+ ldaptcl->trapCmdObj = NULL;
+ }
+ if (ldaptcl->traplist) {
+ free(ldaptcl->traplist);
+ ldaptcl->traplist = NULL;
+ }
+ Tcl_GetStringFromObj(objv[2], &l);
+ if (l == 0)
+ return TCL_OK; /* just turn off trap */
+ ldaptcl->trapCmdObj = objv[2];
+ Tcl_IncrRefCount (ldaptcl->trapCmdObj);
+ if (objc < 4)
+ return TCL_OK; /* no code list */
+ if (Tcl_ListObjLength(interp, objv[3], &l) != TCL_OK)
+ return TCL_ERROR;
+ if (l == 0)
+ return TCL_OK; /* empty code list */
+ ldaptcl->traplist = (int*)malloc(sizeof(int) * (l + 1));
+ ldaptcl->traplist[l] = 0;
+ for (i = 0; i < l; i++) {
+ Tcl_ListObjIndex(interp, objv[3], i, &resultObj);
+ code = LDAP_ErrorStringToCode(interp, Tcl_GetStringFromObj(resultObj, NULL));
+ if (code == -1) {
+ free(ldaptcl->traplist);
+ ldaptcl->traplist = NULL;
+ return TCL_ERROR;
+ }
+ ldaptcl->traplist[i] = code;
+ }
+ return TCL_OK;
+ }
+ if (STREQU (subCommand, "trapcodes")) {
+ int code;
+ Tcl_Obj *resultObj;
+ Tcl_Obj *stringObj;
+ resultObj = Tcl_GetObjResult(interp);
+
+ for (code = 0; code < LDAPTCL_MAXERR; code++) {
+ if (!ldaptclerrorcode[code]) continue;
+ Tcl_ListObjAppendElement(interp, resultObj,
+ Tcl_NewStringObj(ldaptclerrorcode[code], -1));
+ }
+ return TCL_OK;
+ }
+#ifdef LDAP_DEBUG
+ if (STREQU (subCommand, "debug")) {
+ if (objc != 3) {
+ Tcl_AppendStringsToObj(resultObj, "Wrong # of arguments",
+ (char*)NULL);
+ return TCL_ERROR;
+ }
+ return Tcl_GetIntFromObj(interp, objv[2], &ldap_debug);
+ }
+#endif
+
+ /* FIX: this needs to enumerate all the possibilities */
+ Tcl_AppendStringsToObj (resultObj,
+ "subcommand \"",
+ subCommand,
+ "\" must be one of \"add\", ",
+ "\"add_attributes\", ",
+ "\"bind\", \"cache\", \"delete\", ",
+ "\"delete_attributes\", \"modify\", ",
+ "\"modify_rdn\", \"rename_rdn\", ",
+ "\"replace_attributes\", ",
+ "\"search\" or \"unbind\".",
+ (char *)NULL);
+ return TCL_ERROR;
+}
+
+/*
+ * Delete and LDAP command object
+ *
+ */
+static void
+NeoX_LdapObjDeleteCmd(clientData)
+ ClientData clientData;
+{
+ LDAPTCL *ldaptcl = (LDAPTCL *)clientData;
+ LDAP *ldap = ldaptcl->ldap;
+
+ if (ldaptcl->trapCmdObj)
+ Tcl_DecrRefCount (ldaptcl->trapCmdObj);
+ if (ldaptcl->traplist)
+ free(ldaptcl->traplist);
+ ldap_unbind(ldap);
+ free((char*) ldaptcl);
+}
+
+/*-----------------------------------------------------------------------------
+ * NeoX_LdapObjCmd --
+ *
+ * Implements the `ldap' command:
+ * ldap open newObjName host [port]
+ * ldap init newObjName host [port]
+ *
+ * Results:
+ * A standard Tcl result.
+ *
+ * Side effects:
+ * See the user documentation.
+ *-----------------------------------------------------------------------------
+ */
+static int
+NeoX_LdapObjCmd (clientData, interp, objc, objv)
+ ClientData clientData;
+ Tcl_Interp *interp;
+ int objc;
+ Tcl_Obj *CONST objv[];
+{
+ extern int errno;
+ char *subCommand;
+ char *newCommand;
+ char *ldapHost;
+ int ldapPort = LDAP_PORT;
+ LDAP *ldap;
+ LDAPTCL *ldaptcl;
+
+ Tcl_Obj *resultObj = Tcl_GetObjResult (interp);
+
+ if (objc < 3) {
+ Tcl_WrongNumArgs (interp, 1, objv,
+ "(open|init) new_command host [port]|explode dn");
+ return TCL_ERROR;
+ }
+
+ subCommand = Tcl_GetStringFromObj (objv[1], NULL);
+
+ if (STREQU(subCommand, "explode")) {
+ char *param;
+ int nonames = 0;
+ int list = 0;
+ char **exploded, **p;
+
+ param = Tcl_GetStringFromObj (objv[2], NULL);
+ if (param[0] == '-') {
+ if (STREQU(param, "-nonames")) {
+ nonames = 1;
+ } else if (STREQU(param, "-list")) {
+ list = 1;
+ } else {
+ Tcl_WrongNumArgs (interp, 1, objv, "explode ?-nonames|-list? dn");
+ return TCL_ERROR;
+ }
+ }
+ if (nonames || list)
+ param = Tcl_GetStringFromObj (objv[3], NULL);
+ exploded = ldap_explode_dn(param, nonames);
+ for (p = exploded; *p; p++) {
+ if (list) {
+ char *q = strchr(*p, '=');
+ if (!q) {
+ Tcl_SetObjLength(resultObj, 0);
+ Tcl_AppendStringsToObj(resultObj, "rdn ", *p,
+ " missing '='", NULL);
+ ldap_value_free(exploded);
+ return TCL_ERROR;
+ }
+ *q = '\0';
+ if (Tcl_ListObjAppendElement(interp, resultObj,
+ Tcl_NewStringObj(*p, -1)) != TCL_OK ||
+ Tcl_ListObjAppendElement(interp, resultObj,
+ Tcl_NewStringObj(q+1, -1)) != TCL_OK) {
+ ldap_value_free(exploded);
+ return TCL_ERROR;
+ }
+ } else {
+ if (Tcl_ListObjAppendElement(interp, resultObj,
+ Tcl_NewStringObj(*p, -1))) {
+ ldap_value_free(exploded);
+ return TCL_ERROR;
+ }
+ }
+ }
+ ldap_value_free(exploded);
+ return TCL_OK;
+ }
+
+#ifdef UMICH_LDAP
+ if (STREQU(subCommand, "friendly")) {
+ char *friendly = ldap_dn2ufn(Tcl_GetStringFromObj(objv[2], NULL));
+ Tcl_SetStringObj(resultObj, friendly, -1);
+ free(friendly);
+ return TCL_OK;
+ }
+#endif
+
+ newCommand = Tcl_GetStringFromObj (objv[2], NULL);
+ ldapHost = Tcl_GetStringFromObj (objv[3], NULL);
+
+ if (objc == 5) {
+ if (Tcl_GetIntFromObj (interp, objv [4], &ldapPort) == TCL_ERROR) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP port number is non-numeric",
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+ }
+
+ if (STREQU (subCommand, "open")) {
+ ldap = ldap_open (ldapHost, ldapPort);
+ } else if (STREQU (subCommand, "init")) {
+ int version = -1;
+ int i;
+ int value;
+ char *subOption;
+ char *subValue;
+
+#if LDAPTCL_PROTOCOL_VERSION_DEFAULT
+ version = LDAPTCL_PROTOCOL_VERSION_DEFAULT;
+#endif
+
+ for (i = 6; i < objc; i += 2) {
+ subOption = Tcl_GetStringFromObj(objv[i-1], NULL);
+ if (STREQU (subOption, "protocol_version")) {
+#ifdef LDAP_OPT_PROTOCOL_VERSION
+ subValue = Tcl_GetStringFromObj(objv[i], NULL);
+ if (STREQU (subValue, "2")) {
+ version = LDAP_VERSION2;
+ }
+ else if (STREQU (subValue, "3")) {
+#ifdef LDAP_VERSION3
+ version = LDAP_VERSION3;
+#else
+ Tcl_SetStringObj (resultObj, "protocol_version 3 not supported", -1);
+ return TCL_ERROR;
+#endif
+ }
+ else {
+ Tcl_SetStringObj (resultObj, "protocol_version must be '2' or '3'", -1);
+ return TCL_ERROR;
+ }
+#else
+ Tcl_SetStringObj (resultObj, "protocol_version not supported", -1);
+ return TCL_ERROR;
+#endif
+ } else if (STREQU (subOption, "port")) {
+ if (Tcl_GetIntFromObj (interp, objv [i], &ldapPort) == TCL_ERROR) {
+ Tcl_AppendStringsToObj (resultObj,
+ "LDAP port number is non-numeric",
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+ } else {
+ Tcl_SetStringObj (resultObj, "valid options: protocol_version, port", -1);
+ return TCL_ERROR;
+ }
+ }
+ ldap = ldap_init (ldapHost, ldapPort);
+
+#ifdef LDAP_OPT_PROTOCOL_VERSION
+ if (version != -1)
+ ldap_set_option(ldap, LDAP_OPT_PROTOCOL_VERSION, &version);
+#endif
+ } else {
+ Tcl_AppendStringsToObj (resultObj,
+ "option was not \"open\" or \"init\"");
+ return TCL_ERROR;
+ }
+
+ if (ldap == (LDAP *)NULL) {
+ Tcl_SetErrno(errno);
+ Tcl_AppendStringsToObj (resultObj,
+ Tcl_PosixError (interp),
+ (char *)NULL);
+ return TCL_ERROR;
+ }
+
+#ifdef UMICH_LDAP
+ ldap->ld_deref = LDAP_DEREF_NEVER; /* Turn off alias dereferencing */
+#endif
+
+ ldaptcl = (LDAPTCL *) malloc(sizeof(LDAPTCL));
+ ldaptcl->ldap = ldap;
+ ldaptcl->caching = 0;
+ ldaptcl->timeout = 0;
+ ldaptcl->maxmem = 0;
+ ldaptcl->trapCmdObj = NULL;
+ ldaptcl->traplist = NULL;
+ ldaptcl->flags = 0;
+
+ Tcl_CreateObjCommand (interp,
+ newCommand,
+ NeoX_LdapTargetObjCmd,
+ (ClientData) ldaptcl,
+ NeoX_LdapObjDeleteCmd);
+ return TCL_OK;
+}
+
+/*-----------------------------------------------------------------------------
+ * Neo_initLDAP --
+ * Initialize the LDAP interface.
+ *-----------------------------------------------------------------------------
+ */
+int
+Ldaptcl_Init (interp)
+Tcl_Interp *interp;
+{
+ Tcl_CreateObjCommand (interp,
+ "ldap",
+ NeoX_LdapObjCmd,
+ (ClientData) NULL,
+ (Tcl_CmdDeleteProc*) NULL);
+ /*
+ if (Neo_initLDAPX(interp) != TCL_OK)
+ return TCL_ERROR;
+ */
+ Tcl_PkgProvide(interp, "Ldaptcl", VERSION);
+ return TCL_OK;
+}
diff --git a/contrib/ldaptcl/pkgIndex.tcl.in b/contrib/ldaptcl/pkgIndex.tcl.in
new file mode 100644
index 0000000..f257556
--- /dev/null
+++ b/contrib/ldaptcl/pkgIndex.tcl.in
@@ -0,0 +1 @@
+package ifneeded Ldaptcl @NEO_VERSION@ "package require Tclx 8.0; load [file join $dir .. @NEO_SHARED_LIB_FILE@] Ldaptcl"
diff --git a/contrib/ldaptcl/tclAppInit.c b/contrib/ldaptcl/tclAppInit.c
new file mode 100644
index 0000000..f84e182
--- /dev/null
+++ b/contrib/ldaptcl/tclAppInit.c
@@ -0,0 +1,140 @@
+/*
+ * tclAppInit.c --
+ *
+ * Provides a default version of the main program and Tcl_AppInit
+ * procedure for Tcl applications (without Tk).
+ *
+ * Copyright (c) 1993 The Regents of the University of California.
+ * Copyright (c) 1994-1995 Sun Microsystems, Inc.
+ *
+ * See the file "license.terms" for information on usage and redistribution
+ * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * SCCS: @(#) tclAppInit.c 1.17 96/03/26 12:45:29
+ */
+
+#include "tcl.h"
+
+/*
+ * The following variable is a special hack that is needed in order for
+ * Sun shared libraries to be used for Tcl.
+ */
+
+extern int matherr();
+int *tclDummyMathPtr = (int *) matherr;
+
+#ifdef TCL_TEST
+EXTERN int Tcltest_Init _ANSI_ARGS_((Tcl_Interp *interp));
+#endif /* TCL_TEST */
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * main --
+ *
+ * This is the main program for the application.
+ *
+ * Results:
+ * None: Tcl_Main never returns here, so this procedure never
+ * returns either.
+ *
+ * Side effects:
+ * Whatever the application does.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+main(argc, argv)
+ int argc; /* Number of command-line arguments. */
+ char **argv; /* Values of command-line arguments. */
+{
+#ifdef USE_TCLX
+ TclX_Main(argc, argv, Tcl_AppInit);
+#else
+ Tcl_Main(argc, argv, Tcl_AppInit);
+#endif
+ return 0; /* Needed only to prevent compiler warning. */
+}
+
+/*
+ *----------------------------------------------------------------------
+ *
+ * Tcl_AppInit --
+ *
+ * This procedure performs application-specific initialization.
+ * Most applications, especially those that incorporate additional
+ * packages, will have their own version of this procedure.
+ *
+ * Results:
+ * Returns a standard Tcl completion code, and leaves an error
+ * message in interp->result if an error occurs.
+ *
+ * Side effects:
+ * Depends on the startup script.
+ *
+ *----------------------------------------------------------------------
+ */
+
+int
+Tcl_AppInit(interp)
+ Tcl_Interp *interp; /* Interpreter for application. */
+{
+ if (Tcl_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+
+#ifdef USE_ITCL
+ if (Itcl_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage (interp, "Itcl", Itcl_Init, NULL);
+#endif
+
+#ifdef TCL_TEST
+ if (Tcltest_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Tcltest", Tcltest_Init,
+ (Tcl_PackageInitProc *) NULL);
+#endif /* TCL_TEST */
+
+#ifdef USE_TCLX
+ if (Tclx_Init (interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage (interp, "Tclx", Tclx_Init, NULL);
+#endif
+
+ if (Ldaptcl_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Ldaptcl", Ldaptcl_Init,
+ (Tcl_PackageInitProc *) NULL);
+
+ /*
+ * Call the init procedures for included packages. Each call should
+ * look like this:
+ *
+ * if (Mod_Init(interp) == TCL_ERROR) {
+ * return TCL_ERROR;
+ * }
+ *
+ * where "Mod" is the name of the module.
+ */
+
+ /*
+ * Call Tcl_CreateCommand for application-specific commands, if
+ * they weren't already created by the init procedures called above.
+ */
+
+ /*
+ * Specify a user-specific startup file to invoke if the application
+ * is run interactively. Typically the startup file is "~/.apprc"
+ * where "app" is the name of the application. If this line is deleted
+ * then no user-specific startup file will be run under any conditions.
+ */
+
+ Tcl_SetVar(interp, "tcl_rcFileName", "~/.tclshrc", TCL_GLOBAL_ONLY);
+ return TCL_OK;
+}
diff --git a/contrib/ldaptcl/tkAppInit.c b/contrib/ldaptcl/tkAppInit.c
new file mode 100644
index 0000000..68fd956
--- /dev/null
+++ b/contrib/ldaptcl/tkAppInit.c
@@ -0,0 +1,119 @@
+/*
+ * tkXAppInit.c --
+ *
+ * Provides a default version of the Tcl_AppInit procedure for use with
+ * applications built with Extended Tcl and Tk on Unix systems. This is based
+ * on the the UCB Tk file tkAppInit.c
+ *-----------------------------------------------------------------------------
+ * Copyright 1991-1996 Karl Lehenbauer and Mark Diekhans.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies. Karl Lehenbauer and
+ * Mark Diekhans make no representations about the suitability of this
+ * software for any purpose. It is provided "as is" without express or
+ * implied warranty.
+ *-----------------------------------------------------------------------------
+ * $OpenLDAP$
+ *-----------------------------------------------------------------------------
+ */
+
+#include "tclExtend.h"
+#include "tk.h"
+
+/*
+ * The following variable is a special hack that insures the tcl
+ * version of matherr() is used when linking against shared libraries
+ * Even if matherr is not used on this system, there is a dummy version
+ * in libtcl.
+ */
+EXTERN int matherr ();
+int (*tclDummyMathPtr)() = matherr;
+
+
+/*-----------------------------------------------------------------------------
+ * main --
+ *
+ * This is the main program for the application.
+ *-----------------------------------------------------------------------------
+ */
+#ifdef __cplusplus
+int
+main (int argc,
+ char **argv)
+#else
+int
+main (argc, argv)
+ int argc;
+ char **argv;
+#endif
+{
+#ifdef USE_TCLX
+ TkX_Main(argc, argv, Tcl_AppInit);
+#else
+ Tk_Main(argc, argv, Tcl_AppInit);
+#endif
+ return 0; /* Needed only to prevent compiler warning. */
+}
+
+/*-----------------------------------------------------------------------------
+ * Tcl_AppInit --
+ *
+ * This procedure performs application-specific initialization. Most
+ * applications, especially those that incorporate additional packages, will
+ * have their own version of this procedure.
+ *
+ * Results:
+ * Returns a standard Tcl completion code, and leaves an error message in
+ * interp->result if an error occurs.
+ *-----------------------------------------------------------------------------
+ */
+#ifdef __cplusplus
+int
+Tcl_AppInit (Tcl_Interp *interp)
+#else
+int
+Tcl_AppInit (interp)
+ Tcl_Interp *interp;
+#endif
+{
+ if (Tcl_Init (interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+#ifdef USE_TCLX
+ if (Tclx_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Tclx", Tclx_Init, Tclx_SafeInit);
+#endif
+ if (Tk_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Tk", Tk_Init, (Tcl_PackageInitProc *) NULL);
+#ifdef USE_TCLX
+ if (Tkx_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Tkx", Tkx_Init, (Tcl_PackageInitProc *) NULL);
+#endif
+
+ if (Ldaptcl_Init(interp) == TCL_ERROR) {
+ return TCL_ERROR;
+ }
+ Tcl_StaticPackage(interp, "Ldaptcl", Ldaptcl_Init,
+ (Tcl_PackageInitProc *) NULL);
+
+ /*
+ * Call Tcl_CreateCommand for application-specific commands, if
+ * they weren't already created by the init procedures called above.
+ */
+
+ /*
+ * Specify a user-specific startup file to invoke if the application
+ * is run interactively. Typically the startup file is "~/.apprc"
+ * where "app" is the name of the application. If this line is deleted
+ * then no user-specific startup file will be run under any conditions.
+ */
+ Tcl_SetVar(interp, "tcl_rcFileName", "~/.wishxrc", TCL_GLOBAL_ONLY);
+ return TCL_OK;
+}