diff options
Diffstat (limited to 'tests/scripts/test029-ldapglue')
| -rwxr-xr-x | tests/scripts/test029-ldapglue | 224 |
1 files changed, 224 insertions, 0 deletions
diff --git a/tests/scripts/test029-ldapglue b/tests/scripts/test029-ldapglue new file mode 100755 index 0000000..52d4984 --- /dev/null +++ b/tests/scripts/test029-ldapglue @@ -0,0 +1,224 @@ +#! /bin/sh +# $OpenLDAP$ +## This work is part of OpenLDAP Software <http://www.openldap.org/>. +## +## Copyright 1998-2021 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## <http://www.OpenLDAP.org/license.html>. + +echo "running defines.sh" +. $SRCDIR/scripts/defines.sh + +echo "### This test requires the ldap backend and glue overlay." +echo "### If available, and explicitly requested, it can use SASL bind;" +echo "### note that SASL must be properly set up, and the requested" +echo "### mechanism must be available. Define SLAPD_USE_SASL={yes|<mech>}," +echo "### with \"yes\" defaulting to DIGEST-MD5 to enable SASL authc[/authz]." + +if test $BACKLDAP = "ldapno" ; then + echo "LDAP backend not available, test skipped" + exit 0 +fi + +if test $WITH_SASL = "yes" ; then + if test $USE_SASL != "no" ; then + if test $USE_SASL = "yes" ; then + MECH="DIGEST-MD5" + else + MECH="$USE_SASL" + fi + echo "Using SASL authc[/authz] with mech=$MECH; unset SLAPD_USE_SASL to disable" + else + echo "Using proxyAuthz with simple authc..." + fi +else + echo "SASL not available; using proxyAuthz with simple authc..." +fi + +mkdir -p $TESTDIR $DBDIR1 $DBDIR2 $DBDIR3 + +echo "Running slapadd to build slapd database..." +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF1 > $ADDCONF +$SLAPADD -f $ADDCONF -l $LDIFLDAPGLUE1 +RC=$? +if test $RC != 0 ; then + echo "slapadd 1 failed ($RC)!" + exit $RC +fi + +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF2 > $ADDCONF +$SLAPADD -f $ADDCONF -l $LDIFLDAPGLUE2 +RC=$? +if test $RC != 0 ; then + echo "slapadd 2 failed ($RC)!" + exit $RC +fi + +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF3 > $ADDCONF +$SLAPADD -f $ADDCONF -l $LDIFLDAPGLUE3 +RC=$? +if test $RC != 0 ; then + echo "slapadd 3 failed ($RC)!" + exit $RC +fi + +echo "Starting local slapd on TCP/IP port $PORT1..." +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF1 > $CONF1 +$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 & +PID1=$! +if test $WAIT != 0 ; then + echo PID $PID1 + read foo +fi + +echo "Starting remote slapd 1 on TCP/IP port $PORT2..." +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF2 > $CONF2 +$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 & +PID2=$! +if test $WAIT != 0 ; then + echo PID $PID2 + read foo +fi + +echo "Starting remote slapd 2 on TCP/IP port $PORT3..." +. $CONFFILTER $BACKEND $MONITORDB < $LDAPGLUECONF3 > $CONF3 +$SLAPD -f $CONF3 -h $URI3 -d $LVL $TIMING > $LOG3 2>&1 & +PID3=$! +if test $WAIT != 0 ; then + echo PID $PID3 + read foo +fi +KILLPIDS="$PID1 $PID2 $PID3" + +sleep 1 + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT3 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done + +ID="uid=bjorn,ou=People,dc=example,dc=com" +BASE="dc=example,dc=com" +echo "Testing ldapsearch as $ID for \"$BASE\"..." +$LDAPSEARCH -h $LOCALHOST -p $PORT1 -b "$BASE" \ + -D "$ID" -w bjorn > $SEARCHOUT 2>&1 + +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Filtering ldapsearch results..." +$LDIFFILTER -s ldif=e < $SEARCHOUT > $SEARCHFLT +echo "Filtering original ldif used to create database..." +$LDIFFILTER -s ldif=e < $LDAPGLUEOUT > $LDIFFLT +echo "Comparing filter output..." +$CMP $SEARCHFLT $LDIFFLT > $CMPOUT + +if test $? != 0 ; then + echo "comparison failed - glued search with identity assertion didn't succeed" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit 1 +fi + +BASE="dc=example,dc=com" +echo "Testing ldapsearch as anonymous for \"$BASE\"..." +$LDAPSEARCH -h $LOCALHOST -p $PORT1 -b "$BASE" \ + > $SEARCHOUT 2>&1 + +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Filtering ldapsearch results..." +$LDIFFILTER < $SEARCHOUT > $SEARCHFLT +echo "Filtering original ldif used to create database..." +$LDIFFILTER < $LDAPGLUEANONYMOUSOUT > $LDIFFLT +echo "Comparing filter output..." +$CMP $SEARCHFLT $LDIFFLT > $CMPOUT + +if test $? != 0 ; then + echo "comparison failed - anonymous glued search with identity assertion didn't succeed" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit 1 +fi + +# FIXME: this cannot work as is, because SASL bind cannot be proxied! +if test $USE_SASL != "no" ; then + ID="bjorn" + BASE="dc=example,dc=com" + echo "Testing ldapsearch as $ID for \"$BASE\" with SASL bind and identity assertion..." + $LDAPSASLSEARCH -h $LOCALHOST -p $PORT1 -b "$BASE" \ + -Q -U "$ID" -w bjorn -Y $MECH > $SEARCHOUT 2>&1 + + RC=$? + if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC + fi + + echo "Filtering ldapsearch results..." + $LDIFFILTER < $SEARCHOUT > $SEARCHFLT + echo "Filtering original ldif used to create database..." + $LDIFFILTER < $LDAPGLUEOUT > $LDIFFLT + echo "Comparing filter output..." + $CMP $SEARCHFLT $LDIFFLT > $CMPOUT + + if test $? != 0 ; then + echo "comparison failed - glued search with SASL bind and identity assertion didn't succeed" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit 1 + fi +fi + +test $KILLSERVERS != no && kill -HUP $KILLPIDS + +echo ">>>>> Test succeeded" + +test $KILLSERVERS != no && wait + +exit 0 |