From 7731832751ab9f3c6ddeb66f186d3d7fa1934a6d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 13:11:40 +0200 Subject: Adding upstream version 2.4.57+dfsg. Signed-off-by: Daniel Baumann --- doc/guide/admin/monitoringslapd.sdf | 505 ++++++++++++++++++++++++++++++++++++ 1 file changed, 505 insertions(+) create mode 100644 doc/guide/admin/monitoringslapd.sdf (limited to 'doc/guide/admin/monitoringslapd.sdf') diff --git a/doc/guide/admin/monitoringslapd.sdf b/doc/guide/admin/monitoringslapd.sdf new file mode 100644 index 0000000..45d50fe --- /dev/null +++ b/doc/guide/admin/monitoringslapd.sdf @@ -0,0 +1,505 @@ +# $OpenLDAP$ +# Copyright 1999-2021 The OpenLDAP Foundation, All Rights Reserved. +# COPYING RESTRICTIONS APPLY, see COPYRIGHT. +H1: Monitoring + +{{slapd}}(8) supports an optional {{TERM:LDAP}} monitoring interface +you can use to obtain information regarding the current state of +your {{slapd}} instance. For instance, the interface allows you +to determine how many clients are connected to the server currently. +The monitoring information is provided by a specialized backend, +the {{monitor}} backend. A manual page, {{slapd-monitor}}(5) is +available. + +When the monitoring interface is enabled, LDAP clients may be used +to access information provided by the {{monitor}} backend, subject +to access and other controls. + +When enabled, the {{monitor}} backend dynamically generates and +returns objects in response to search requests in the {{cn=Monitor}} +subtree. Each object contains information about a particular aspect +of the server. The information is held in a combination of user +applications and operational attributes. This information can be +access with {{ldapsearch(1)}}, with any general-purpose LDAP browser, +or with specialized monitoring tools. The {{SECT:Accessing Monitoring +Information}} section provides a brief tutorial on how to use +{{ldapsearch}}(1) to access monitoring information, while the +{{SECT:Monitor information}} section details monitoring information +base and its organization. + +While support for the monitor backend is included in default builds +of slapd(8), this support requires some configuration to become +active. This may be done using either {{EX:cn=config}} or +{{slapd.conf}}(5). The former is discussed in the {{SECT:Monitor +configuration via cn=config}} section of this of this chapter. The +latter is discussed in the {{SECT:Monitor configuration via +slapd.conf(5)}} section of this chapter. These sections assume +monitor backend is built into {{slapd}} (e.g., {{EX:--enable-monitor=yes}}, +the default). If the monitor backend was built as a module (e.g., +{{EX:--enable-monitor=mod}}, this module must loaded. Loading of +modules is discussed in the {{SECT:Configuring slapd}} and {{SECT:The +slapd Configuration File}} chapters. + + +H2: Monitor configuration via cn=config(5) + +{{This section has yet to be written.}} + + +H2: Monitor configuration via slapd.conf(5) + +Configuration of the slapd.conf(5) to support LDAP monitoring +is quite simple. + +First, ensure {{core.schema}} schema configuration file is included +by your {{slapd.conf}}(5) file. The {{monitor}} backend requires +it. + +Second, instantiate the {{monitor backend}} by adding a +{{database monitor}} directive below your existing database +sections. For instance: + +> database monitor + +Lastly, add additional global or database directives as needed. + +Like most other database backends, the monitor backend does honor +slapd(8) access and other administrative controls. As some monitor +information may be sensitive, it is generally recommend access to +cn=monitor be restricted to directory administrators and their +monitoring agents. Adding an {{access}} directive immediately below +the {{database monitor}} directive is a clear and effective approach +for controlling access. For instance, the addition of the following +{{access}} directive immediately below the {{database monitor}} +directive restricts access to monitoring information to the specified +directory manager. + +> access to * +> by dn.exact="cn=Manager,dc=example,dc=com +> by * none + +More information on {{slapd}}(8) access controls, see {{The access +Control Directive}} section of the {{SECT:The slapd Configuration +File}} chapter and {{slapd.access}}(5). + +After restarting {{slapd}}(8), you are ready to start exploring the +monitoring information provided in {{EX:cn=config}} as discussed +in the {{SECT:Accessing Monitoring Information}} section of this +chapter. + +One can verify slapd(8) is properly configured to provide monitoring +information by attempting to read the {{EX:cn=monitor}} object. +For instance, if the following {{ldapsearch}}(1) command returns the +cn=monitor object (with, as requested, no attributes), it's working. + +> ldapsearch -x -D 'cn=Manager,dc=example,dc=com' -W \ +> -b 'cn=Monitor' -s base 1.1 + +Note that unlike general purpose database backends, the database +suffix is hardcoded. It's always {{EX:cn=Monitor}}. So no {{suffix}} +directive should be provided. Also note that general purpose +database backends, the monitor backend cannot be instantiated +multiple times. That is, there can only be one (or zero) occurrences +of {{EX:database monitor}} in the server's configuration. + + +H2: Accessing Monitoring Information + +As previously discussed, when enabled, the {{monitor}} backend +dynamically generates and returns objects in response to search +requests in the {{cn=Monitor}} subtree. Each object contains +information about a particular aspect of the server. The information +is held in a combination of user applications and operational +attributes. This information can be accessed with {{ldapsearch(1)}}, +with any general-purpose LDAP browser, or with specialized monitoring +tools. + +This section provides a provides a brief tutorial on how to use +{{ldapsearch}}(1) to access monitoring information. + +To inspect any particular monitor object, one performs search +operation on the object with a baseObject scope and a +{{EX:(objectClass=*)}} filter. As the monitoring information is +contained in a combination of user applications and operational +attributes, the return all user applications attributes (e.g., +{{EX:'*'}}) and all operational attributes (e.g., {{EX:'+'}}) should +be requested. For instance, to read the {{EX:cn=Monitor}} object +itself, the {{ldapsearch}}(1) command (modified to fit your configuration) +can be used: + +> ldapsearch -x -D 'cn=Manager,dc=example,dc=com' -W \ +> -b 'cn=Monitor' -s base '(objectClass=*)' '*' '+' + +When run against your server, this should produce output +similar to: + +> dn: cn=Monitor +> objectClass: monitorServer +> structuralObjectClass: monitorServer +> cn: Monitor +> creatorsName: +> modifiersName: +> createTimestamp: 20061208223558Z +> modifyTimestamp: 20061208223558Z +> description: This subtree contains monitoring/managing objects. +> description: This object contains information about this server. +> description: Most of the information is held in operational attributes, which +> must be explicitly requested. +> monitoredInfo: OpenLDAP: slapd 2.4 (Dec 7 2006 17:30:29) +> entryDN: cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: TRUE + +To reduce the number of uninteresting attributes returned, one +can be more selective when requesting which attributes are to be +returned. For instance, one could request the return of all +attributes allowed by the {{monitorServer}} object class (e.g., +{{EX:@objectClass}}) instead of all user and all operational +attributes: + +> ldapsearch -x -D 'cn=Manager,dc=example,dc=com' -W \ +> -b 'cn=Monitor' -s base '(objectClass=*)' '@monitorServer' + +This limits the output as follows: + +> dn: cn=Monitor +> objectClass: monitorServer +> cn: Monitor +> description: This subtree contains monitoring/managing objects. +> description: This object contains information about this server. +> description: Most of the information is held in operational attributes, which +> must be explicitly requested. +> monitoredInfo: OpenLDAP: slapd 2.X (Dec 7 2006 17:30:29) + +To return the names of all the monitoring objects, one performs a +search of {{EX:cn=Monitor}} with subtree scope and {{EX:(objectClass=*)}} +filter and requesting no attributes (e.g., {{EX:1.1}}) be returned. + +> ldapsearch -x -D 'cn=Manager,dc=example,dc=com' -W -b 'cn=Monitor' -s sub 1.1 + +If you run this command you will discover that there are many objects +in the {{cn=Monitor}} subtree. The following section describes +some of the commonly available monitoring objects. + + +H2: Monitor Information + +The {{monitor}} backend provides a wealth of information useful +for monitoring the slapd(8) contained in set of monitor objects. +Each object contains information about a particular aspect of +the server, such as a backends, a connection, or a thread. +Some objects serve as containers for other objects and used +to construct a hierarchy of objects. + +In this hierarchy, the most superior object is {cn=Monitor}. +While this object primarily serves as a container for other +objects, most of which are containers, this object provides +information about this server. In particular, it provides the +slapd(8) version string. Example: + +> dn: cn=Monitor +> monitoredInfo: OpenLDAP: slapd 2.X (Dec 7 2006 17:30:29) + +Note: Examples in this section (and its subsections) have been +trimmed to show only key information. + + +H3: Backends + +The {{EX:cn=Backends,cn=Monitor}} object, itself, provides a list +of available backends. The list of available backends all builtin +backends, as well as backends loaded by modules. For example: + +> dn: cn=Backends,cn=Monitor +> monitoredInfo: config +> monitoredInfo: ldif +> monitoredInfo: monitor +> monitoredInfo: bdb +> monitoredInfo: hdb + +This indicates the {{config}}, {{ldif}}, {{monitor}}, {{bdb}}, +and {{hdb}} backends are available. + +The {{EX:cn=Backends,cn=Monitor}} object is also a container +for available backend objects. Each available backend object +contains information about a particular backend. For example: + +> dn: cn=Backend 0,cn=Backends,cn=Monitor +> monitoredInfo: config +> monitorRuntimeConfig: TRUE +> supportedControl: 2.16.840.1.113730.3.4.2 +> seeAlso: cn=Database 0,cn=Databases,cn=Monitor +> +> dn: cn=Backend 1,cn=Backends,cn=Monitor +> monitoredInfo: ldif +> monitorRuntimeConfig: TRUE +> supportedControl: 2.16.840.1.113730.3.4.2 +> +> dn: cn=Backend 2,cn=Backends,cn=Monitor +> monitoredInfo: monitor +> monitorRuntimeConfig: TRUE +> supportedControl: 2.16.840.1.113730.3.4.2 +> seeAlso: cn=Database 2,cn=Databases,cn=Monitor +> +> dn: cn=Backend 3,cn=Backends,cn=Monitor +> monitoredInfo: bdb +> monitorRuntimeConfig: TRUE +> supportedControl: 1.3.6.1.1.12 +> supportedControl: 2.16.840.1.113730.3.4.2 +> supportedControl: 1.3.6.1.4.1.4203.666.5.2 +> supportedControl: 1.2.840.113556.1.4.319 +> supportedControl: 1.3.6.1.1.13.1 +> supportedControl: 1.3.6.1.1.13.2 +> supportedControl: 1.3.6.1.4.1.4203.1.10.1 +> supportedControl: 1.2.840.113556.1.4.1413 +> supportedControl: 1.3.6.1.4.1.4203.666.11.7.2 +> seeAlso: cn=Database 1,cn=Databases,cn=Monitor +> +> dn: cn=Backend 4,cn=Backends,cn=Monitor +> monitoredInfo: hdb +> monitorRuntimeConfig: TRUE +> supportedControl: 1.3.6.1.1.12 +> supportedControl: 2.16.840.1.113730.3.4.2 +> supportedControl: 1.3.6.1.4.1.4203.666.5.2 +> supportedControl: 1.2.840.113556.1.4.319 +> supportedControl: 1.3.6.1.1.13.1 +> supportedControl: 1.3.6.1.1.13.2 +> supportedControl: 1.3.6.1.4.1.4203.1.10.1 +> supportedControl: 1.2.840.113556.1.4.1413 +> supportedControl: 1.3.6.1.4.1.4203.666.11.7.2 + +For each of these objects, monitorInfo indicates which backend the +information in the object is about. For instance, the {{EX:cn=Backend +3,cn=Backends,cn=Monitor}} object contains (in the example) information +about the {{bdb}} backend. + +!block table +Attribute|Description +monitoredInfo|Name of backend +supportedControl|supported LDAP control extensions +seeAlso|Database objects of instances of this backend +!endblock + +H3: Connections + +The main entry is empty; it should contain some statistics on the number +of connections. + +Dynamic child entries are created for each open connection, with stats on +the activity on that connection (the format will be detailed later). +There are two special child entries that show the number of total and +current connections respectively. + +For example: + +Total Connections: + +> dn: cn=Total,cn=Connections,cn=Monitor +> structuralObjectClass: monitorCounterObject +> monitorCounter: 4 +> entryDN: cn=Total,cn=Connections,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +Current Connections: + +> dn: cn=Current,cn=Connections,cn=Monitor +> structuralObjectClass: monitorCounterObject +> monitorCounter: 2 +> entryDN: cn=Current,cn=Connections,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + + +H3: Databases + +The main entry contains the naming context of each configured database; +the child entries contain, for each database, the type and the naming +context. + +For example: + +> dn: cn=Database 2,cn=Databases,cn=Monitor +> structuralObjectClass: monitoredObject +> monitoredInfo: monitor +> monitorIsShadow: FALSE +> monitorContext: cn=Monitor +> readOnly: FALSE +> entryDN: cn=Database 2,cn=Databases,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +H3: Listener + +It contains the description of the devices the server is currently +listening on: + +> dn: cn=Listener 0,cn=Listeners,cn=Monitor +> structuralObjectClass: monitoredObject +> monitorConnectionLocalAddress: IP=0.0.0.0:389 +> entryDN: cn=Listener 0,cn=Listeners,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + + +H3: Log + +It contains the currently active log items. The {{Log}} subsystem allows +user modify operations on the {{description}} attribute, whose values {{MUST}} +be in the list of admittable log switches: + +> Trace +> Packets +> Args +> Conns +> BER +> Filter +> Config +> ACL +> Stats +> Stats2 +> Shell +> Parse +> Sync + +These values can be added, replaced or deleted; they affect what +messages are sent to the syslog device. +Custom values could be added by custom modules. + +H3: Operations + +It shows some statistics on the operations performed by the server: + +> Initiated +> Completed + +and for each operation type, i.e.: + +> Bind +> Unbind +> Add +> Delete +> Modrdn +> Modify +> Compare +> Search +> Abandon +> Extended + +There are too many types to list example here, so please try for yourself +using {{SECT: Monitor search example}} + +H3: Overlays + +The main entry contains the type of overlays available at run-time; +the child entries, for each overlay, contain the type of the overlay. + +It should also contain the modules that have been loaded if dynamic +overlays are enabled: + +> # Overlays, Monitor +> dn: cn=Overlays,cn=Monitor +> structuralObjectClass: monitorContainer +> monitoredInfo: syncprov +> monitoredInfo: accesslog +> monitoredInfo: glue +> entryDN: cn=Overlays,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: TRUE + +H3: SASL + +Currently empty. + +H3: Statistics + +It shows some statistics on the data sent by the server: + +> Bytes +> PDU +> Entries +> Referrals + +e.g. + +> # Entries, Statistics, Monitor +> dn: cn=Entries,cn=Statistics,cn=Monitor +> structuralObjectClass: monitorCounterObject +> monitorCounter: 612248 +> entryDN: cn=Entries,cn=Statistics,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +H3: Threads + +It contains the maximum number of threads enabled at startup and the +current backload. + +e.g. + +> # Max, Threads, Monitor +> dn: cn=Max,cn=Threads,cn=Monitor +> structuralObjectClass: monitoredObject +> monitoredInfo: 16 +> entryDN: cn=Max,cn=Threads,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + + +H3: Time + +It contains two child entries with the start time and the current time +of the server. + +e.g. + +Start time: + +> dn: cn=Start,cn=Time,cn=Monitor +> structuralObjectClass: monitoredObject +> monitorTimestamp: 20061205124040Z +> entryDN: cn=Start,cn=Time,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +Current time: + +> dn: cn=Current,cn=Time,cn=Monitor +> structuralObjectClass: monitoredObject +> monitorTimestamp: 20061207120624Z +> entryDN: cn=Current,cn=Time,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +H3: TLS + +Currently empty. + +H3: Waiters + +It contains the number of current read waiters. + +e.g. + +Read waiters: + +> dn: cn=Read,cn=Waiters,cn=Monitor +> structuralObjectClass: monitorCounterObject +> monitorCounter: 7 +> entryDN: cn=Read,cn=Waiters,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +Write waiters: + +> dn: cn=Write,cn=Waiters,cn=Monitor +> structuralObjectClass: monitorCounterObject +> monitorCounter: 0 +> entryDN: cn=Write,cn=Waiters,cn=Monitor +> subschemaSubentry: cn=Subschema +> hasSubordinates: FALSE + +Add new monitored things here and discuss, referencing man pages and present +examples + + -- cgit v1.2.3