From 7731832751ab9f3c6ddeb66f186d3d7fa1934a6d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 13:11:40 +0200 Subject: Adding upstream version 2.4.57+dfsg. Signed-off-by: Daniel Baumann --- doc/man/man5/ldap.conf.5 | 554 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 554 insertions(+) create mode 100644 doc/man/man5/ldap.conf.5 (limited to 'doc/man/man5/ldap.conf.5') diff --git a/doc/man/man5/ldap.conf.5 b/doc/man/man5/ldap.conf.5 new file mode 100644 index 0000000..c4d21ca --- /dev/null +++ b/doc/man/man5/ldap.conf.5 @@ -0,0 +1,554 @@ +.TH LDAP.CONF 5 "RELEASEDATE" "OpenLDAP LDVERSION" +.\" $OpenLDAP$ +.\" Copyright 1998-2021 The OpenLDAP Foundation All Rights Reserved. +.\" Copying restrictions apply. See COPYRIGHT/LICENSE. +.SH NAME +ldap.conf, .ldaprc \- LDAP configuration file/environment variables +.SH SYNOPSIS +ETCDIR/ldap.conf, ldaprc, .ldaprc, $LDAP +.SH DESCRIPTION +If the environment variable \fBLDAPNOINIT\fP is defined, all +defaulting is disabled. +.LP +The +.I ldap.conf +configuration file is used to set system-wide defaults to be applied when +running +.I ldap +clients. +.LP +Users may create an optional configuration file, +.I ldaprc +or +.IR .ldaprc , +in their home directory which will be used to override the system-wide +defaults file. +The file +.I ldaprc +in the current working directory is also used. +.LP +.LP +Additional configuration files can be specified using +the \fBLDAPCONF\fP and \fBLDAPRC\fP environment variables. +\fBLDAPCONF\fP may be set to the path of a configuration file. This +path can be absolute or relative to the current working directory. +The \fBLDAPRC\fP, if defined, should be the basename of a file +in the current working directory or in the user's home directory. +.LP +Environmental variables may also be used to augment the file based defaults. +The name of the variable is the option name with an added prefix of \fBLDAP\fP. +For example, to define \fBBASE\fP via the environment, set the variable +\fBLDAPBASE\fP to the desired value. +.LP +Some options are user-only. Such options are ignored if present +in the +.I ldap.conf +(or file specified by +.BR LDAPCONF ). +.LP +Thus the following files and variables are read, in order: +.nf + variable $LDAPNOINIT, and if that is not set: + system file ETCDIR/ldap.conf, + user files $HOME/ldaprc, $HOME/.ldaprc, ./ldaprc, + system file $LDAPCONF, + user files $HOME/$LDAPRC, $HOME/.$LDAPRC, ./$LDAPRC, + variables $LDAP. +.fi +Settings late in the list override earlier ones. +.SH SYNTAX +The configuration options are case-insensitive; +their value, on a case by case basis, may be case-sensitive. +.LP +Blank lines are ignored. +.br +Lines beginning with a hash mark (`#') are comments, and ignored. +.LP +Valid lines are made of an option's name (a sequence of non-blanks, +conventionally written in uppercase, although not required), +followed by a value. +The value starts with the first non-blank character after +the option's name, and terminates at the end of the line, +or at the last sequence of blanks before the end of the line. +The tokenization of the value, if any, is delegated to the handler(s) +for that option, if any. Quoting values that contain blanks +may be incorrect, as the quotes would become part of the value. +For example, + +.nf + # Wrong - erroneous quotes: + URI "ldap:// ldaps://" + + # Right - space-separated list of URIs, without quotes: + URI ldap:// ldaps:// + + # Right - DN syntax needs quoting for Example, Inc: + BASE ou=IT staff,o="Example, Inc",c=US + # or: + BASE ou=IT staff,o=Example\\2C Inc,c=US + + # Wrong - comment on same line as option: + DEREF never # Never follow aliases +.fi +.LP +A line cannot be longer than LINE_MAX, which should be more than 2000 bytes +on all platforms. +There is no mechanism to split a long line on multiple lines, either for +beautification or to overcome the above limit. +.SH OPTIONS +The different configuration options are: +.TP +.B URI +Specifies the URI(s) of an LDAP server(s) to which the +.I LDAP +library should connect. The URI scheme may be any of +.BR ldap , +.B ldaps +or +.BR ldapi , +which refer to LDAP over TCP, LDAP over SSL (TLS) and LDAP +over IPC (UNIX domain sockets), respectively. +Each server's name can be specified as a +domain-style name or an IP address literal. Optionally, the +server's name can followed by a ':' and the port number the LDAP +server is listening on. If no port number is provided, the default +port for the scheme is used (389 for ldap://, 636 for ldaps://). +For LDAP over IPC, +.B name +is the name of the socket, and no +.B port +is required, nor allowed; note that directory separators must be +URL-encoded, like any other characters that are special to URLs; +so the socket + + /usr/local/var/ldapi + +must be specified as + + ldapi://%2Fusr%2Flocal%2Fvar%2Fldapi + +A space separated list of URIs may be provided. +.TP +.B BASE +Specifies the default base DN to use when performing ldap operations. +The base must be specified as a Distinguished Name in LDAP format. +.TP +.B BINDDN +Specifies the default bind DN to use when performing ldap operations. +The bind DN must be specified as a Distinguished Name in LDAP format. +.B This is a user-only option. +.TP +.B DEREF +Specifies how alias dereferencing is done when performing a search. The +.B +can be specified as one of the following keywords: +.RS +.TP +.B never +Aliases are never dereferenced. This is the default. +.TP +.B searching +Aliases are dereferenced in subordinates of the base object, but +not in locating the base object of the search. +.TP +.B finding +Aliases are only dereferenced when locating the base object of the search. +.TP +.B always +Aliases are dereferenced both in searching and in locating the base object +of the search. +.RE +.TP +.TP +.B HOST +Specifies the name(s) of an LDAP server(s) to which the +.I LDAP +library should connect. Each server's name can be specified as a +domain-style name or an IP address and optionally followed by a ':' and +the port number the ldap server is listening on. A space separated +list of hosts may be provided. +.B HOST +is deprecated in favor of +.BR URI . +.TP +.B NETWORK_TIMEOUT +Specifies the timeout (in seconds) after which the poll(2)/select(2) +following a connect(2) returns in case of no activity. +.TP +.B PORT +Specifies the default port used when connecting to LDAP servers(s). +The port may be specified as a number. +.B PORT +is deprecated in favor of +.BR URI. +.TP +.B REFERRALS +Specifies if the client should automatically follow referrals returned +by LDAP servers. +The default is on. +Note that the command line tools +.BR ldapsearch (1) +&co always override this option. +.\" This should only be allowed via ldap_set_option(3) +.\".TP +.\".B RESTART +.\"Determines whether the library should implicitly restart connections (FIXME). +.TP +.B SIZELIMIT +Specifies a size limit (number of entries) to use when performing searches. +The number should be a non-negative integer. \fISIZELIMIT\fP of zero (0) +specifies a request for unlimited search size. Please note that the server +may still apply any server-side limit on the amount of entries that can be +returned by a search operation. +.TP +.B TIMELIMIT +Specifies a time limit (in seconds) to use when performing searches. +The number should be a non-negative integer. \fITIMELIMIT\fP of zero (0) +specifies unlimited search time to be used. Please note that the server +may still apply any server-side limit on the duration of a search operation. +.TP +.B VERSION {2|3} +Specifies what version of the LDAP protocol should be used. +.TP +.B TIMEOUT +Specifies a timeout (in seconds) after which calls to synchronous LDAP +APIs will abort if no response is received. Also used for any +.BR ldap_result (3) +calls where a NULL timeout parameter is supplied. +.SH SASL OPTIONS +If OpenLDAP is built with Simple Authentication and Security Layer support, +there are more options you can specify. +.TP +.B SASL_MECH +Specifies the SASL mechanism to use. +.TP +.B SASL_REALM +Specifies the SASL realm. +.TP +.B SASL_AUTHCID +Specifies the authentication identity. +.B This is a user-only option. +.TP +.B SASL_AUTHZID +Specifies the proxy authorization identity. +.B This is a user-only option. +.TP +.B SASL_SECPROPS +Specifies Cyrus SASL security properties. The +.B +can be specified as a comma-separated list of the following: +.RS +.TP +.B none +(without any other properties) causes the properties +defaults ("noanonymous,noplain") to be cleared. +.TP +.B noplain +disables mechanisms susceptible to simple passive attacks. +.TP +.B noactive +disables mechanisms susceptible to active attacks. +.TP +.B nodict +disables mechanisms susceptible to passive dictionary attacks. +.TP +.B noanonymous +disables mechanisms which support anonymous login. +.TP +.B forwardsec +requires forward secrecy between sessions. +.TP +.B passcred +requires mechanisms which pass client credentials (and allows +mechanisms which can pass credentials to do so). +.TP +.B minssf= +specifies the minimum acceptable +.I security strength factor +as an integer approximating the effective key length used for +encryption. 0 (zero) implies no protection, 1 implies integrity +protection only, 56 allows DES or other weak ciphers, 112 +allows triple DES and other strong ciphers, 128 allows RC4, +Blowfish and other modern strong ciphers. The default is 0. +.TP +.B maxssf= +specifies the maximum acceptable +.I security strength factor +as an integer (see +.B minssf +description). The default is +.BR INT_MAX . +.TP +.B maxbufsize= +specifies the maximum security layer receive buffer +size allowed. 0 disables security layers. The default is 65536. +.RE +.TP +.B SASL_NOCANON +Do not perform reverse DNS lookups to canonicalize SASL host names. The default is off. +.SH GSSAPI OPTIONS +If OpenLDAP is built with Generic Security Services Application Programming Interface support, +there are more options you can specify. +.TP +.B GSSAPI_SIGN +Specifies if GSSAPI signing (GSS_C_INTEG_FLAG) should be used. +The default is off. +.TP +.B GSSAPI_ENCRYPT +Specifies if GSSAPI encryption (GSS_C_INTEG_FLAG and GSS_C_CONF_FLAG) +should be used. The default is off. +.TP +.B GSSAPI_ALLOW_REMOTE_PRINCIPAL +Specifies if GSSAPI based authentication should try to form the +target principal name out of the ldapServiceName or dnsHostName +attribute of the targets RootDSE entry. The default is off. +.SH TLS OPTIONS +If OpenLDAP is built with Transport Layer Security support, there +are more options you can specify. These options are used when an +.B ldaps:// URI +is selected (by default or otherwise) or when the application +negotiates TLS by issuing the LDAP StartTLS operation. +.TP +.B TLS_CACERT +Specifies the file that contains certificates for all of the Certificate +Authorities the client will recognize. +.TP +.B TLS_CACERTDIR +Specifies the path of a directory that contains Certificate Authority +certificates in separate individual files. The +.B TLS_CACERT +is always used before +.B TLS_CACERTDIR. +This parameter is ignored with GnuTLS. + +When using Mozilla NSS, may contain a Mozilla NSS cert/key +database. If contains a Mozilla NSS cert/key database and +CA cert files, OpenLDAP will use the cert/key database and will +ignore the CA cert files. +.TP +.B TLS_CERT +Specifies the file that contains the client certificate. +.B This is a user-only option. + +When using Mozilla NSS, if using a cert/key database (specified with +TLS_CACERTDIR), TLS_CERT specifies the name of the certificate to use: +.nf + TLS_CERT Certificate for Sam Carter +.fi +If using a token other than the internal built in token, specify the +token name first, followed by a colon: +.nf + TLS_CERT my hardware device:Certificate for Sam Carter +.fi +Use certutil \-L to list the certificates by name: +.nf + certutil \-d /path/to/certdbdir \-L +.fi +.TP +.B TLS_ECNAME +Specify the name of the curve(s) to use for Elliptic curve Diffie-Hellman +ephemeral key exchange. This option is only used for OpenSSL. +This option is not used with GnuTLS; the curves may be +chosen in the GnuTLS ciphersuite specification. +.TP +.B TLS_KEY +Specifies the file that contains the private key that matches the certificate +stored in the +.B TLS_CERT +file. Currently, the private key must not be protected with a password, so +it is of critical importance that the key file is protected carefully. +.B This is a user-only option. + +When using Mozilla NSS, TLS_KEY specifies the name of a file that contains +the password for the key for the certificate specified with TLS_CERT. The +modutil command can be used to turn off password protection for the cert/key +database. For example, if TLS_CACERTDIR specifies /home/scarter/.moznss as +the location of the cert/key database, use modutil to change the password +to the empty string: +.nf + modutil \-dbdir ~/.moznss \-changepw 'NSS Certificate DB' +.fi +You must have the old password, if any. Ignore the WARNING about the running +browser. Press 'Enter' for the new password. + +.TP +.B TLS_CIPHER_SUITE +Specifies acceptable cipher suite and preference order. + should be a cipher specification for +the TLS library in use (OpenSSL, GnuTLS, or Mozilla NSS). +Example: +.RS +.RS +.TP +.I OpenSSL: +TLS_CIPHER_SUITE HIGH:MEDIUM:+SSLv2 +.TP +.I GnuTLS: +TLS_CIPHER_SUITE SECURE256:!AES-128-CBC +.RE + +To check what ciphers a given spec selects in OpenSSL, use: + +.nf + openssl ciphers \-v +.fi + +With GnuTLS the available specs can be found in the manual page of +.BR gnutls\-cli (1) +(see the description of the +option +.BR \-\-priority ). + +In older versions of GnuTLS, where gnutls\-cli does not support the option +\-\-priority, you can obtain the \(em more limited \(em list of ciphers by calling: + +.nf + gnutls\-cli \-l +.fi + +When using Mozilla NSS, the OpenSSL cipher suite specifications are used and +translated into the format used internally by Mozilla NSS. There isn't an easy +way to list the cipher suites from the command line. The authoritative list +is in the source code for Mozilla NSS in the file sslinfo.c in the structure +.nf + static const SSLCipherSuiteInfo suiteInfo[] +.fi +.RE +.TP +.B TLS_PROTOCOL_MIN [.] +Specifies minimum SSL/TLS protocol version that will be negotiated. +If the server doesn't support at least that version, +the SSL handshake will fail. +To require TLS 1.x or higher, set this option to 3.(x+1), +e.g., + +.nf + TLS_PROTOCOL_MIN 3.2 +.fi + +would require TLS 1.1. +Specifying a minimum that is higher than that supported by the +OpenLDAP implementation will result in it requiring the +highest level that it does support. +This parameter is ignored with GnuTLS. +.TP +.B TLS_RANDFILE +Specifies the file to obtain random bits from when /dev/[u]random is +not available. Generally set to the name of the EGD/PRNGD socket. +The environment variable RANDFILE can also be used to specify the filename. +This parameter is ignored with GnuTLS and Mozilla NSS. +.TP +.B TLS_REQCERT +Specifies what checks to perform on server certificates in a TLS session, +if any. The +.B +can be specified as one of the following keywords: +.RS +.TP +.B never +The client will not request or check any server certificate. +.TP +.B allow +The server certificate is requested. If no certificate is provided, +the session proceeds normally. If a bad certificate is provided, it will +be ignored and the session proceeds normally. +.TP +.B try +The server certificate is requested. If no certificate is provided, +the session proceeds normally. If a bad certificate is provided, +the session is immediately terminated. +.TP +.B demand | hard +These keywords are equivalent. The server certificate is requested. If no +certificate is provided, or a bad certificate is provided, the session +is immediately terminated. This is the default setting. +.RE +.TP +.B TLS_REQSAN +Specifies what checks to perform on the subjectAlternativeName +(SAN) extensions in a server certificate when validating the certificate +name against the specified hostname of the server. The +.B +can be specified as one of the following keywords: +.RS +.TP +.B never +The client will not check any SAN in the certificate. +.TP +.B allow +The SAN is checked against the specified hostname. If a SAN is +present but none match the specified hostname, the SANs are ignored +and the usual check against the certificate DN is used. +This is the default setting. +.TP +.B try +The SAN is checked against the specified hostname. If no SAN is present +in the server certificate, the usual check against the certificate DN +is used. If a SAN is present but doesn't match the specified hostname, +the session is immediately terminated. This setting may be preferred +when a mix of certs with and without SANs are in use. +.TP +.B demand | hard +These keywords are equivalent. The SAN is checked against the specified +hostname. If no SAN is present in the server certificate, or no SANs +match, the session is immediately terminated. This setting should be +used when only certificates with SANs are in use. +.RE +.TP +.B TLS_CRLCHECK +Specifies if the Certificate Revocation List (CRL) of the CA should be +used to verify if the server certificates have not been revoked. This +requires +.B TLS_CACERTDIR +parameter to be set. This parameter is ignored with GnuTLS and Mozilla NSS. +.B +can be specified as one of the following keywords: +.RS +.TP +.B none +No CRL checks are performed +.TP +.B peer +Check the CRL of the peer certificate +.TP +.B all +Check the CRL for a whole certificate chain +.RE +.TP +.B TLS_CRLFILE +Specifies the file containing a Certificate Revocation List to be used +to verify if the server certificates have not been revoked. This +parameter is only supported with GnuTLS and Mozilla NSS. +.SH "ENVIRONMENT VARIABLES" +.TP +LDAPNOINIT +disable all defaulting +.TP +LDAPCONF +path of a configuration file +.TP +LDAPRC +basename of ldaprc file in $HOME or $CWD +.TP +LDAP +Set as from ldap.conf +.SH FILES +.TP +.I ETCDIR/ldap.conf +system-wide ldap configuration file +.TP +.I $HOME/ldaprc, $HOME/.ldaprc +user ldap configuration file +.TP +.I $CWD/ldaprc +local ldap configuration file +.SH "SEE ALSO" +.BR ldap (3), +.BR ldap_set_option (3), +.BR ldap_result (3), +.BR openssl (1), +.BR sasl (3) +.SH AUTHOR +Kurt Zeilenga, The OpenLDAP Project +.SH ACKNOWLEDGEMENTS +.so ../Project -- cgit v1.2.3