Adding upstream version 1.4.0.upstream/1.4.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 2598 insertions, 0 deletions

diff --git a/modules/pam_mkhomedir/Makefile.am b/modules/pam_mkhomedir/Makefile.am
new file mode 100644
index 0000000..973bc33
--- /dev/null
+++ b/modules/pam_mkhomedir/Makefile.am
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2005, 2006, 2009 Thorsten Kukuk <kukuk@suse.de>
+# Copyright (c) 2008 Red Hat, Inc.
+#
+
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+
+EXTRA_DIST = $(XMLS)
+
+if HAVE_DOC
+dist_man_MANS = pam_mkhomedir.8 mkhomedir_helper.8
+endif
+XMLS = README.xml pam_mkhomedir.8.xml mkhomedir_helper.8.xml
+dist_check_SCRIPTS = tst-pam_mkhomedir
+TESTS = $(dist_check_SCRIPTS) $(check_PROGRAMS)
+
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+	-DMKHOMEDIR_HELPER=\"$(sbindir)/mkhomedir_helper\" $(WARN_CFLAGS)
+
+securelib_LTLIBRARIES = pam_mkhomedir.la
+pam_mkhomedir_la_SOURCES = pam_mkhomedir.c
+pam_mkhomedir_la_LIBADD = $(top_builddir)/libpam/libpam.la
+pam_mkhomedir_la_LDFLAGS = -no-undefined -avoid-version -module
+if HAVE_VERSIONING
+  pam_mkhomedir_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map
+endif
+
+sbin_PROGRAMS = mkhomedir_helper
+mkhomedir_helper_SOURCES = mkhomedir_helper.c
+mkhomedir_helper_LDADD = $(top_builddir)/libpam/libpam.la
+
+check_PROGRAMS = tst-pam_mkhomedir-retval
+tst_pam_mkhomedir_retval_LDADD = $(top_builddir)/libpam/libpam.la
+
+if ENABLE_REGENERATE_MAN
+dist_noinst_DATA = README
+-include $(top_srcdir)/Make.xml.rules
+endif
diff --git a/modules/pam_mkhomedir/Makefile.in b/modules/pam_mkhomedir/Makefile.in
new file mode 100644
index 0000000..8776cb5
--- /dev/null
+++ b/modules/pam_mkhomedir/Makefile.in
@@ -0,0 +1,1254 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright (c) 2005, 2006, 2009 Thorsten Kukuk <kukuk@suse.de>
+# Copyright (c) 2008 Red Hat, Inc.
+#
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_VERSIONING_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/../modules.map
+sbin_PROGRAMS = mkhomedir_helper$(EXEEXT)
+check_PROGRAMS = tst-pam_mkhomedir-retval$(EXEEXT)
+subdir = modules/pam_mkhomedir
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/japhar_grep_cflags.m4 \
+	$(top_srcdir)/m4/jh_path_xml_catalog.m4 \
+	$(top_srcdir)/m4/ld-O1.m4 $(top_srcdir)/m4/ld-as-needed.m4 \
+	$(top_srcdir)/m4/ld-no-undefined.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libprelude.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_check_SCRIPTS) \
+	$(am__dist_noinst_DATA_DIST) $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(securelibdir)" \
+	"$(DESTDIR)$(man8dir)"
+PROGRAMS = $(sbin_PROGRAMS)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+LTLIBRARIES = $(securelib_LTLIBRARIES)
+pam_mkhomedir_la_DEPENDENCIES = $(top_builddir)/libpam/libpam.la
+am_pam_mkhomedir_la_OBJECTS = pam_mkhomedir.lo
+pam_mkhomedir_la_OBJECTS = $(am_pam_mkhomedir_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+pam_mkhomedir_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(pam_mkhomedir_la_LDFLAGS) $(LDFLAGS) \
+	-o $@
+am_mkhomedir_helper_OBJECTS = mkhomedir_helper.$(OBJEXT)
+mkhomedir_helper_OBJECTS = $(am_mkhomedir_helper_OBJECTS)
+mkhomedir_helper_DEPENDENCIES = $(top_builddir)/libpam/libpam.la
+tst_pam_mkhomedir_retval_SOURCES = tst-pam_mkhomedir-retval.c
+tst_pam_mkhomedir_retval_OBJECTS = tst-pam_mkhomedir-retval.$(OBJEXT)
+tst_pam_mkhomedir_retval_DEPENDENCIES =  \
+	$(top_builddir)/libpam/libpam.la
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/mkhomedir_helper.Po \
+	./$(DEPDIR)/pam_mkhomedir.Plo \
+	./$(DEPDIR)/tst-pam_mkhomedir-retval.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(pam_mkhomedir_la_SOURCES) $(mkhomedir_helper_SOURCES) \
+	tst-pam_mkhomedir-retval.c
+DIST_SOURCES = $(pam_mkhomedir_la_SOURCES) $(mkhomedir_helper_SOURCES) \
+	tst-pam_mkhomedir-retval.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__dist_noinst_DATA_DIST = README
+DATA = $(dist_noinst_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp \
+	$(top_srcdir)/build-aux/test-driver
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BROWSER = @BROWSER@
+BUILD_CFLAGS = @BUILD_CFLAGS@
+BUILD_CPPFLAGS = @BUILD_CPPFLAGS@
+BUILD_LDFLAGS = @BUILD_LDFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ECONF_CFLAGS = @ECONF_CFLAGS@
+ECONF_LIBS = @ECONF_LIBS@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FO2PDF = @FO2PDF@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBAUDIT = @LIBAUDIT@
+LIBCRACK = @LIBCRACK@
+LIBCRYPT = @LIBCRYPT@
+LIBDB = @LIBDB@
+LIBDL = @LIBDL@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBPRELUDE_CFLAGS = @LIBPRELUDE_CFLAGS@
+LIBPRELUDE_CONFIG = @LIBPRELUDE_CONFIG@
+LIBPRELUDE_CONFIG_PREFIX = @LIBPRELUDE_CONFIG_PREFIX@
+LIBPRELUDE_LDFLAGS = @LIBPRELUDE_LDFLAGS@
+LIBPRELUDE_LIBS = @LIBPRELUDE_LIBS@
+LIBPRELUDE_PREFIX = @LIBPRELUDE_PREFIX@
+LIBPRELUDE_PTHREAD_CFLAGS = @LIBPRELUDE_PTHREAD_CFLAGS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NIS_CFLAGS = @NIS_CFLAGS@
+NIS_LIBS = @NIS_LIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NSL_CFLAGS = @NSL_CFLAGS@
+NSL_LIBS = @NSL_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SCONFIGDIR = @SCONFIGDIR@
+SECUREDIR = @SECUREDIR@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRINGPARAM_VENDORDIR = @STRINGPARAM_VENDORDIR@
+STRIP = @STRIP@
+TIRPC_CFLAGS = @TIRPC_CFLAGS@
+TIRPC_LIBS = @TIRPC_LIBS@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARN_CFLAGS = @WARN_CFLAGS@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libc_cv_fpie = @libc_cv_fpie@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pam_cv_ld_O1 = @pam_cv_ld_O1@
+pam_cv_ld_as_needed = @pam_cv_ld_as_needed@
+pam_cv_ld_no_undefined = @pam_cv_ld_no_undefined@
+pam_xauth_path = @pam_xauth_path@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+EXTRA_DIST = $(XMLS)
+@HAVE_DOC_TRUE@dist_man_MANS = pam_mkhomedir.8 mkhomedir_helper.8
+XMLS = README.xml pam_mkhomedir.8.xml mkhomedir_helper.8.xml
+dist_check_SCRIPTS = tst-pam_mkhomedir
+TESTS = $(dist_check_SCRIPTS) $(check_PROGRAMS)
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+	-DMKHOMEDIR_HELPER=\"$(sbindir)/mkhomedir_helper\" $(WARN_CFLAGS)
+
+securelib_LTLIBRARIES = pam_mkhomedir.la
+pam_mkhomedir_la_SOURCES = pam_mkhomedir.c
+pam_mkhomedir_la_LIBADD = $(top_builddir)/libpam/libpam.la
+pam_mkhomedir_la_LDFLAGS = -no-undefined -avoid-version -module \
+	$(am__append_1)
+mkhomedir_helper_SOURCES = mkhomedir_helper.c
+mkhomedir_helper_LDADD = $(top_builddir)/libpam/libpam.la
+tst_pam_mkhomedir_retval_LDADD = $(top_builddir)/libpam/libpam.la
+@ENABLE_REGENERATE_MAN_TRUE@dist_noinst_DATA = README
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modules/pam_mkhomedir/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu modules/pam_mkhomedir/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-sbinPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+	@list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+install-securelibLTLIBRARIES: $(securelib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(securelibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(securelibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(securelibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(securelibdir)"; \
+	}
+
+uninstall-securelibLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(securelibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(securelibdir)/$$f"; \
+	done
+
+clean-securelibLTLIBRARIES:
+	-test -z "$(securelib_LTLIBRARIES)" || rm -f $(securelib_LTLIBRARIES)
+	@list='$(securelib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+pam_mkhomedir.la: $(pam_mkhomedir_la_OBJECTS) $(pam_mkhomedir_la_DEPENDENCIES) $(EXTRA_pam_mkhomedir_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(pam_mkhomedir_la_LINK) -rpath $(securelibdir) $(pam_mkhomedir_la_OBJECTS) $(pam_mkhomedir_la_LIBADD) $(LIBS)
+
+mkhomedir_helper$(EXEEXT): $(mkhomedir_helper_OBJECTS) $(mkhomedir_helper_DEPENDENCIES) $(EXTRA_mkhomedir_helper_DEPENDENCIES) 
+	@rm -f mkhomedir_helper$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(mkhomedir_helper_OBJECTS) $(mkhomedir_helper_LDADD) $(LIBS)
+
+tst-pam_mkhomedir-retval$(EXEEXT): $(tst_pam_mkhomedir_retval_OBJECTS) $(tst_pam_mkhomedir_retval_DEPENDENCIES) $(EXTRA_tst_pam_mkhomedir_retval_DEPENDENCIES) 
+	@rm -f tst-pam_mkhomedir-retval$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(tst_pam_mkhomedir_retval_OBJECTS) $(tst_pam_mkhomedir_retval_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mkhomedir_helper.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pam_mkhomedir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tst-pam_mkhomedir-retval.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man8: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS: $(check_PROGRAMS) $(dist_check_SCRIPTS)
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all $(check_PROGRAMS) $(dist_check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+tst-pam_mkhomedir.log: tst-pam_mkhomedir
+	@p='tst-pam_mkhomedir'; \
+	b='tst-pam_mkhomedir'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+tst-pam_mkhomedir-retval.log: tst-pam_mkhomedir-retval$(EXEEXT)
+	@p='tst-pam_mkhomedir-retval$(EXEEXT)'; \
+	b='tst-pam_mkhomedir-retval'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) \
+	  $(dist_check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(MANS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(securelibdir)" "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
+	clean-sbinPROGRAMS clean-securelibLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/mkhomedir_helper.Po
+	-rm -f ./$(DEPDIR)/pam_mkhomedir.Plo
+	-rm -f ./$(DEPDIR)/tst-pam_mkhomedir-retval.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man install-securelibLTLIBRARIES
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/mkhomedir_helper.Po
+	-rm -f ./$(DEPDIR)/pam_mkhomedir.Plo
+	-rm -f ./$(DEPDIR)/tst-pam_mkhomedir-retval.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS \
+	uninstall-securelibLTLIBRARIES
+
+uninstall-man: uninstall-man8
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-TESTS \
+	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
+	clean-sbinPROGRAMS clean-securelibLTLIBRARIES cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-man8 install-pdf \
+	install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
+	install-securelibLTLIBRARIES install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	recheck tags tags-am uninstall uninstall-am uninstall-man \
+	uninstall-man8 uninstall-sbinPROGRAMS \
+	uninstall-securelibLTLIBRARIES
+
+.PRECIOUS: Makefile
+
+@ENABLE_REGENERATE_MAN_TRUE@-include $(top_srcdir)/Make.xml.rules
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/modules/pam_mkhomedir/README b/modules/pam_mkhomedir/README
new file mode 100644
index 0000000..cfc7bc4
--- /dev/null
+++ b/modules/pam_mkhomedir/README
@@ -0,0 +1,36 @@
+pam_mkhomedir — PAM module to create users home directory
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+DESCRIPTION
+
+The pam_mkhomedir PAM module will create a users home directory if it does not
+exist when the session begins. This allows users to be present in central
+database (such as NIS, kerberos or LDAP) without using a distributed file
+system or pre-creating a large number of directories. The skeleton directory
+(usually /etc/skel/) is used to copy default files and also sets a umask for
+the creation.
+
+The new users home directory will not be removed after logout of the user.
+
+EXAMPLES
+
+A sample /etc/pam.d/login file:
+
+  auth       requisite   pam_securetty.so
+  auth       sufficient  pam_ldap.so
+  auth       required    pam_unix.so
+  auth       required    pam_nologin.so
+  account    sufficient  pam_ldap.so
+  account    required    pam_unix.so
+  password   required    pam_unix.so
+  session    required    pam_mkhomedir.so skel=/etc/skel/ umask=0022
+  session    required    pam_unix.so
+  session    optional    pam_lastlog.so
+  session    optional    pam_mail.so standard
+
+
+AUTHOR
+
+pam_mkhomedir was written by Jason Gunthorpe <jgg@debian.org>.
+
diff --git a/modules/pam_mkhomedir/README.xml b/modules/pam_mkhomedir/README.xml
new file mode 100644
index 0000000..978cbe7
--- /dev/null
+++ b/modules/pam_mkhomedir/README.xml
@@ -0,0 +1,36 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+"http://www.docbook.org/xml/4.3/docbookx.dtd"
+[
+<!--
+<!ENTITY pamaccess SYSTEM "pam_mkhomedir.8.xml">
+-->
+]>
+
+<article>
+
+  <articleinfo>
+
+    <title>
+      <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_mkhomedir.8.xml" xpointer='xpointer(//refnamediv[@id = "pam_mkhomedir-name"]/*)'/>
+    </title>
+
+  </articleinfo>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_mkhomedir.8.xml" xpointer='xpointer(//refsect1[@id = "pam_mkhomedir-description"]/*)'/>
+  </section>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_mkhomedir.8.xml" xpointer='xpointer(//refsect1[@id = "pam_mkhomedir-examples"]/*)'/>
+  </section>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_mkhomedir.8.xml" xpointer='xpointer(//refsect1[@id = "pam_mkhomedir-author"]/*)'/>
+  </section>
+
+</article>
diff --git a/modules/pam_mkhomedir/mkhomedir_helper.8 b/modules/pam_mkhomedir/mkhomedir_helper.8
new file mode 100644
index 0000000..5ac40fb
--- /dev/null
+++ b/modules/pam_mkhomedir/mkhomedir_helper.8
@@ -0,0 +1,60 @@
+'\" t
+.\"     Title: mkhomedir_helper
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\"      Date: 06/08/2020
+.\"    Manual: Linux-PAM Manual
+.\"    Source: Linux-PAM Manual
+.\"  Language: English
+.\"
+.TH "MKHOMEDIR_HELPER" "8" "06/08/2020" "Linux-PAM Manual" "Linux\-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+mkhomedir_helper \- Helper binary that creates home directories
+.SH "SYNOPSIS"
+.HP \w'\fBmkhomedir_helper\fR\ 'u
+\fBmkhomedir_helper\fR {\fIuser\fR} [\fIumask\fR\ [\ \fIpath\-to\-skel\fR\ ]]
+.SH "DESCRIPTION"
+.PP
+\fImkhomedir_helper\fR
+is a helper program for the
+\fIpam_mkhomedir\fR
+module that creates home directories and populates them with contents of the specified skel directory\&.
+.PP
+The default value of
+\fIumask\fR
+is 0022 and the default value of
+\fIpath\-to\-skel\fR
+is
+\fI/etc/skel\fR\&.
+.PP
+The helper is separated from the module to not require direct access from login SELinux domains to the contents of user home directories\&. The SELinux domain transition happens when the module is executing the
+\fImkhomedir_helper\fR\&.
+.PP
+The helper never touches home directories if they already exist\&.
+.SH "SEE ALSO"
+.PP
+\fBpam_mkhomedir\fR(8)
+.SH "AUTHOR"
+.PP
+Written by Tomas Mraz based on the code originally in
+\fIpam_mkhomedir\fR
+module\&.
diff --git a/modules/pam_mkhomedir/mkhomedir_helper.8.xml b/modules/pam_mkhomedir/mkhomedir_helper.8.xml
new file mode 100644
index 0000000..c834edd
--- /dev/null
+++ b/modules/pam_mkhomedir/mkhomedir_helper.8.xml
@@ -0,0 +1,78 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+	"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
+
+<refentry id="mkhomedir_helper">
+
+  <refmeta>
+    <refentrytitle>mkhomedir_helper</refentrytitle>
+    <manvolnum>8</manvolnum>
+    <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo>
+  </refmeta>
+
+  <refnamediv id="mkhomedir_helper-name">
+    <refname>mkhomedir_helper</refname>
+    <refpurpose>Helper binary that creates home directories</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis id="mkhomedir_helper-cmdsynopsis">
+      <command>mkhomedir_helper</command>
+      <arg choice="req">
+        <replaceable>user</replaceable>
+      </arg>
+      <arg choice="opt">
+        <replaceable>umask</replaceable>
+      <arg choice="opt">
+        <replaceable>path-to-skel</replaceable>
+      </arg>
+      </arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1 id="mkhomedir_helper-description">
+
+    <title>DESCRIPTION</title>
+
+    <para>
+      <emphasis>mkhomedir_helper</emphasis> is a helper program for the
+      <emphasis>pam_mkhomedir</emphasis> module that creates home directories
+      and populates them with contents of the specified skel directory.
+    </para>
+
+    <para>
+      The default value of <replaceable>umask</replaceable> is 0022 and the
+      default value of <replaceable>path-to-skel</replaceable> is
+      <emphasis>/etc/skel</emphasis>.
+    </para>
+
+    <para>
+      The helper is separated from the module to not require direct access from
+      login SELinux domains to the contents of user home directories. The
+      SELinux domain transition happens when the module is executing the
+      <emphasis>mkhomedir_helper</emphasis>.
+    </para>
+
+    <para>
+      The helper never touches home directories if they already exist.
+    </para>
+  </refsect1>
+
+  <refsect1 id='mkhomedir_helper-see_also'>
+    <title>SEE ALSO</title>
+    <para>
+      <citerefentry>
+	<refentrytitle>pam_mkhomedir</refentrytitle><manvolnum>8</manvolnum>
+      </citerefentry>
+    </para>
+  </refsect1>
+
+  <refsect1 id='mkhomedir_helper-author'>
+    <title>AUTHOR</title>
+      <para>
+        Written by Tomas Mraz based on the code originally in
+        <emphasis>pam_mkhomedir</emphasis> module.
+      </para>
+  </refsect1>
+
+</refentry>
diff --git a/modules/pam_mkhomedir/mkhomedir_helper.c b/modules/pam_mkhomedir/mkhomedir_helper.c
new file mode 100644
index 0000000..8969da5
--- /dev/null
+++ b/modules/pam_mkhomedir/mkhomedir_helper.c
@@ -0,0 +1,406 @@
+/* mkhomedir_helper - helper for pam_mkhomedir module
+
+   Released under the GNU LGPL version 2 or later
+
+   Copyright (c) Red Hat, Inc., 2009
+   Originally written by Jason Gunthorpe <jgg@debian.org> Feb 1999
+   Structure taken from pam_lastlogin by Andrew Morgan
+     <morgan@parc.power.net> 1996
+ */
+
+#include "config.h"
+
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <pwd.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <dirent.h>
+#include <syslog.h>
+
+#include <security/pam_ext.h>
+#include <security/pam_modutil.h>
+
+static unsigned long u_mask = 0022;
+static char skeldir[BUFSIZ] = "/etc/skel";
+
+/* Do the actual work of creating a home dir */
+static int
+create_homedir(const struct passwd *pwd,
+	       const char *source, const char *dest)
+{
+   char remark[BUFSIZ];
+   DIR *d;
+   struct dirent *dent;
+   int retval = PAM_SESSION_ERR;
+
+   /* Create the new directory */
+   if (mkdir(dest, 0700) && errno != EEXIST)
+   {
+      pam_syslog(NULL, LOG_ERR, "unable to create directory %s: %m", dest);
+      return PAM_PERM_DENIED;
+   }
+
+   /* See if we need to copy the skel dir over. */
+   if ((source == NULL) || (strlen(source) == 0))
+   {
+      retval = PAM_SUCCESS;
+      goto go_out;
+   }
+
+   /* Scan the directory */
+   d = opendir(source);
+   if (d == NULL)
+   {
+      pam_syslog(NULL, LOG_DEBUG, "unable to read directory %s: %m", source);
+      retval = PAM_PERM_DENIED;
+      goto go_out;
+   }
+
+   for (dent = readdir(d); dent != NULL; dent = readdir(d))
+   {
+      int srcfd;
+      int destfd;
+      int res;
+      struct stat st;
+#ifndef PATH_MAX
+      char *newsource = NULL, *newdest = NULL;
+      /* track length of buffers */
+      int nslen = 0, ndlen = 0;
+      int slen = strlen(source), dlen = strlen(dest);
+#else
+      char newsource[PATH_MAX], newdest[PATH_MAX];
+#endif
+
+      /* Skip some files.. */
+      if (strcmp(dent->d_name,".") == 0 ||
+	  strcmp(dent->d_name,"..") == 0)
+	 continue;
+
+      /* Determine what kind of file it is. */
+#ifndef PATH_MAX
+      nslen = slen + strlen(dent->d_name) + 2;
+
+      if (nslen <= 0)
+	{
+	  retval = PAM_BUF_ERR;
+	  goto go_out;
+	}
+
+      if ((newsource = malloc(nslen)) == NULL)
+	{
+	  retval = PAM_BUF_ERR;
+	  goto go_out;
+	}
+
+      sprintf(newsource, "%s/%s", source, dent->d_name);
+#else
+      snprintf(newsource, sizeof(newsource), "%s/%s", source, dent->d_name);
+#endif
+
+      if (lstat(newsource, &st) != 0)
+#ifndef PATH_MAX
+      {
+	      free(newsource);
+	      newsource = NULL;
+         continue;
+      }
+#else
+      continue;
+#endif
+
+
+      /* We'll need the new file's name. */
+#ifndef PATH_MAX
+      ndlen = dlen + strlen(dent->d_name)+2;
+
+      if (ndlen <= 0)
+	{
+	  retval = PAM_BUF_ERR;
+	  goto go_out;
+	}
+
+      if ((newdest = malloc(ndlen)) == NULL)
+	{
+	  free (newsource);
+	  retval = PAM_BUF_ERR;
+	  goto go_out;
+	}
+
+      sprintf (newdest, "%s/%s", dest, dent->d_name);
+#else
+      snprintf (newdest, sizeof (newdest), "%s/%s", dest, dent->d_name);
+#endif
+
+      /* If it's a directory, recurse. */
+      if (S_ISDIR(st.st_mode))
+      {
+         retval = create_homedir(pwd, newsource, newdest);
+
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+
+         if (retval != PAM_SUCCESS)
+	   {
+	     closedir(d);
+	     goto go_out;
+	   }
+         continue;
+      }
+
+      /* If it's a symlink, create a new link. */
+      if (S_ISLNK(st.st_mode))
+      {
+	 int pointedlen = 0;
+#ifndef PATH_MAX
+	 char *pointed = NULL;
+           {
+		   int size = 100;
+
+		   while (1) {
+			   pointed = malloc(size);
+			   if (pointed == NULL) {
+				   free(newsource);
+				   free(newdest);
+				   return PAM_BUF_ERR;
+			   }
+			   pointedlen = readlink(newsource, pointed, size);
+			   if (pointedlen < 0) break;
+			   if (pointedlen < size) break;
+			   free(pointed);
+			   size *= 2;
+		   }
+	   }
+	   if (pointedlen < 0)
+		   free(pointed);
+	   else
+		   pointed[pointedlen] = 0;
+#else
+         char pointed[PATH_MAX];
+         memset(pointed, 0, sizeof(pointed));
+
+         pointedlen = readlink(newsource, pointed, sizeof(pointed) - 1);
+#endif
+
+	 if (pointedlen >= 0) {
+            if(symlink(pointed, newdest) == 0)
+            {
+               if (lchown(newdest, pwd->pw_uid, pwd->pw_gid) != 0)
+               {
+                   pam_syslog(NULL, LOG_DEBUG,
+			      "unable to change perms on link %s: %m", newdest);
+                   closedir(d);
+#ifndef PATH_MAX
+		   free(pointed);
+		   free(newsource);
+		   free(newdest);
+#endif
+                   return PAM_PERM_DENIED;
+               }
+            }
+#ifndef PATH_MAX
+	    free(pointed);
+#endif
+         }
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+         continue;
+      }
+
+      /* If it's not a regular file, it's probably not a good idea to create
+       * the new device node, FIFO, or whatever it is. */
+      if (!S_ISREG(st.st_mode))
+      {
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+         continue;
+      }
+
+      /* Open the source file */
+      if ((srcfd = open(newsource, O_RDONLY)) < 0 || fstat(srcfd, &st) != 0)
+      {
+         pam_syslog(NULL, LOG_DEBUG,
+		    "unable to open or stat src file %s: %m", newsource);
+         closedir(d);
+
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+
+	 return PAM_PERM_DENIED;
+      }
+
+      /* Open the dest file */
+      if ((destfd = open(newdest, O_WRONLY | O_TRUNC | O_CREAT, 0600)) < 0)
+      {
+         pam_syslog(NULL, LOG_DEBUG,
+		    "unable to open dest file %s: %m", newdest);
+	 close(srcfd);
+	 closedir(d);
+
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+	 return PAM_PERM_DENIED;
+      }
+
+      /* Set the proper ownership and permissions for the module. We make
+         the file a+w and then mask it with the set mask. This preseves
+	 execute bits */
+      if (fchmod(destfd, (st.st_mode | 0222) & (~u_mask)) != 0 ||
+	  fchown(destfd, pwd->pw_uid, pwd->pw_gid) != 0)
+      {
+         pam_syslog(NULL, LOG_DEBUG,
+		    "unable to change perms on copy %s: %m", newdest);
+         close(srcfd);
+         close(destfd);
+         closedir(d);
+
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+
+	 return PAM_PERM_DENIED;
+      }
+
+      /* Copy the file */
+      do
+      {
+	 res = pam_modutil_read(srcfd, remark, sizeof(remark));
+
+	 if (res == 0)
+	     continue;
+
+	 if (res > 0) {
+	     if (pam_modutil_write(destfd, remark, res) == res)
+		continue;
+	 }
+
+	 /* If we get here, pam_modutil_read returned a -1 or
+	    pam_modutil_write returned something unexpected. */
+	 pam_syslog(NULL, LOG_DEBUG, "unable to perform IO: %m");
+	 close(srcfd);
+	 close(destfd);
+	 closedir(d);
+
+#ifndef PATH_MAX
+	 free(newsource); newsource = NULL;
+	 free(newdest); newdest = NULL;
+#endif
+
+	 return PAM_PERM_DENIED;
+      }
+      while (res != 0);
+      close(srcfd);
+      close(destfd);
+
+#ifndef PATH_MAX
+      free(newsource); newsource = NULL;
+      free(newdest); newdest = NULL;
+#endif
+
+   }
+   closedir(d);
+
+   retval = PAM_SUCCESS;
+
+ go_out:
+
+   if (chmod(dest, 0777 & (~u_mask)) != 0 ||
+       chown(dest, pwd->pw_uid, pwd->pw_gid) != 0)
+   {
+      pam_syslog(NULL, LOG_DEBUG,
+		 "unable to change perms on directory %s: %m", dest);
+      return PAM_PERM_DENIED;
+   }
+
+   return retval;
+}
+
+static int
+make_parent_dirs(char *dir, int make)
+{
+  int rc = PAM_SUCCESS;
+  char *cp = strrchr(dir, '/');
+  struct stat st;
+
+  if (!cp)
+    return rc;
+
+  if (cp != dir) {
+    *cp = '\0';
+    if (stat(dir, &st) && errno == ENOENT)
+      rc = make_parent_dirs(dir, 1);
+    *cp = '/';
+
+    if (rc != PAM_SUCCESS)
+      return rc;
+  }
+
+  if (make && mkdir(dir, 0755) && errno != EEXIST) {
+    pam_syslog(NULL, LOG_ERR, "unable to create directory %s: %m", dir);
+    return PAM_PERM_DENIED;
+  }
+
+  return rc;
+}
+
+int
+main(int argc, char *argv[])
+{
+   struct passwd *pwd;
+   struct stat st;
+
+   if (argc < 2) {
+	fprintf(stderr, "Usage: %s <username> [<umask> [<skeldir>]]\n", argv[0]);
+	return PAM_SESSION_ERR;
+   }
+
+   pwd = getpwnam(argv[1]);
+   if (pwd == NULL) {
+	pam_syslog(NULL, LOG_ERR, "User unknown.");
+	return PAM_USER_UNKNOWN;
+   }
+
+   if (argc >= 3) {
+	char *eptr;
+	errno = 0;
+	u_mask = strtoul(argv[2], &eptr, 0);
+	if (errno != 0 || *eptr != '\0') {
+		pam_syslog(NULL, LOG_ERR, "Bogus umask value %s", argv[2]);
+		return PAM_SESSION_ERR;
+	}
+   }
+
+   if (argc >= 4) {
+	if (strlen(argv[3]) >= sizeof(skeldir)) {
+		pam_syslog(NULL, LOG_ERR, "Too long skeldir path.");
+		return PAM_SESSION_ERR;
+	}
+	strcpy(skeldir, argv[3]);
+   }
+
+   /* Stat the home directory, if something exists then we assume it is
+      correct and return a success */
+   if (stat(pwd->pw_dir, &st) == 0)
+	return PAM_SUCCESS;
+
+   if (make_parent_dirs(pwd->pw_dir, 0) != PAM_SUCCESS)
+	return PAM_PERM_DENIED;
+
+   return create_homedir(pwd, skeldir, pwd->pw_dir);
+}
diff --git a/modules/pam_mkhomedir/pam_mkhomedir.8 b/modules/pam_mkhomedir/pam_mkhomedir.8
new file mode 100644
index 0000000..4889135
--- /dev/null
+++ b/modules/pam_mkhomedir/pam_mkhomedir.8
@@ -0,0 +1,130 @@
+'\" t
+.\"     Title: pam_mkhomedir
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\"      Date: 06/08/2020
+.\"    Manual: Linux-PAM Manual
+.\"    Source: Linux-PAM Manual
+.\"  Language: English
+.\"
+.TH "PAM_MKHOMEDIR" "8" "06/08/2020" "Linux-PAM Manual" "Linux-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+pam_mkhomedir \- PAM module to create users home directory
+.SH "SYNOPSIS"
+.HP \w'\fBpam_mkhomedir\&.so\fR\ 'u
+\fBpam_mkhomedir\&.so\fR [silent] [debug] [umask=\fImode\fR] [skel=\fIskeldir\fR]
+.SH "DESCRIPTION"
+.PP
+The pam_mkhomedir PAM module will create a users home directory if it does not exist when the session begins\&. This allows users to be present in central database (such as NIS, kerberos or LDAP) without using a distributed file system or pre\-creating a large number of directories\&. The skeleton directory (usually
+/etc/skel/) is used to copy default files and also sets a umask for the creation\&.
+.PP
+The new users home directory will not be removed after logout of the user\&.
+.SH "OPTIONS"
+.PP
+\fBsilent\fR
+.RS 4
+Don\*(Aqt print informative messages\&.
+.RE
+.PP
+\fBdebug\fR
+.RS 4
+Turns on debugging via
+\fBsyslog\fR(3)\&.
+.RE
+.PP
+\fBumask=\fR\fB\fImask\fR\fR
+.RS 4
+The user file\-creation mask is set to
+\fImask\fR\&. The default value of mask is 0022\&.
+.RE
+.PP
+\fBskel=\fR\fB\fI/path/to/skel/directory\fR\fR
+.RS 4
+Indicate an alternative
+skel
+directory to override the default
+/etc/skel\&.
+.RE
+.SH "MODULE TYPES PROVIDED"
+.PP
+Only the
+\fBsession\fR
+module type is provided\&.
+.SH "RETURN VALUES"
+.PP
+PAM_BUF_ERR
+.RS 4
+Memory buffer error\&.
+.RE
+.PP
+PAM_PERM_DENIED
+.RS 4
+Not enough permissions to create the new directory or read the skel directory\&.
+.RE
+.PP
+PAM_USER_UNKNOWN
+.RS 4
+User not known to the underlying authentication module\&.
+.RE
+.PP
+PAM_SUCCESS
+.RS 4
+Environment variables were set\&.
+.RE
+.SH "FILES"
+.PP
+/etc/skel
+.RS 4
+Default skel directory
+.RE
+.SH "EXAMPLES"
+.PP
+A sample /etc/pam\&.d/login file:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+  auth       requisite   pam_securetty\&.so
+  auth       sufficient  pam_ldap\&.so
+  auth       required    pam_unix\&.so
+  auth       required    pam_nologin\&.so
+  account    sufficient  pam_ldap\&.so
+  account    required    pam_unix\&.so
+  password   required    pam_unix\&.so
+  session    required    pam_mkhomedir\&.so skel=/etc/skel/ umask=0022
+  session    required    pam_unix\&.so
+  session    optional    pam_lastlog\&.so
+  session    optional    pam_mail\&.so standard
+      
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+.SH "SEE ALSO"
+.PP
+\fBpam.d\fR(5),
+\fBpam\fR(8)\&.
+.SH "AUTHOR"
+.PP
+pam_mkhomedir was written by Jason Gunthorpe <jgg@debian\&.org>\&.
diff --git a/modules/pam_mkhomedir/pam_mkhomedir.8.xml b/modules/pam_mkhomedir/pam_mkhomedir.8.xml
new file mode 100644
index 0000000..19744de
--- /dev/null
+++ b/modules/pam_mkhomedir/pam_mkhomedir.8.xml
@@ -0,0 +1,212 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+                   "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd">
+
+<refentry id='pam_mkhomedir'>
+
+  <refmeta>
+    <refentrytitle>pam_mkhomedir</refentrytitle>
+    <manvolnum>8</manvolnum>
+    <refmiscinfo class='setdesc'>Linux-PAM Manual</refmiscinfo>
+  </refmeta>
+
+  <refnamediv id='pam_mkhomedir-name'>
+    <refname>pam_mkhomedir</refname>
+    <refpurpose>
+      PAM module to create users home directory
+    </refpurpose>
+  </refnamediv>
+
+<!-- body begins here -->
+
+  <refsynopsisdiv>
+    <cmdsynopsis id="pam_mkhomedir-cmdsynopsis">
+      <command>pam_mkhomedir.so</command>
+      <arg choice="opt">
+        silent
+      </arg>
+      <arg choice="opt">
+        debug
+      </arg>
+      <arg choice="opt">
+        umask=<replaceable>mode</replaceable>
+      </arg>
+      <arg choice="opt">
+        skel=<replaceable>skeldir</replaceable>
+      </arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+
+  <refsect1 id="pam_mkhomedir-description">
+    <title>DESCRIPTION</title>
+    <para>
+      The pam_mkhomedir PAM module will create a users home directory
+      if it does not exist when the session begins. This allows users
+      to be present in central database (such as NIS, kerberos or LDAP)
+      without using a distributed file system or pre-creating a large
+      number of directories. The skeleton directory (usually
+      <filename>/etc/skel/</filename>) is used to copy default files
+      and also sets a umask for the creation.
+    </para>
+    <para>
+      The new users home directory will not be removed after logout
+      of the user.
+    </para>
+  </refsect1>
+
+  <refsect1 id="pam_mkhomedir-options">
+    <title>OPTIONS</title>
+    <variablelist>
+
+      <varlistentry>
+        <term>
+          <option>silent</option>
+        </term>
+        <listitem>
+          <para>
+            Don't print informative messages.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>
+          <option>debug</option>
+        </term>
+        <listitem>
+          <para>
+           Turns on debugging via
+            <citerefentry>
+              <refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum>
+            </citerefentry>.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>
+          <option>umask=<replaceable>mask</replaceable></option>
+        </term>
+        <listitem>
+          <para>
+            The user file-creation mask is set to
+            <replaceable>mask</replaceable>. The default value of mask is
+            0022.
+          </para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term>
+          <option>skel=<replaceable>/path/to/skel/directory</replaceable></option>
+        </term>
+        <listitem>
+          <para>
+            Indicate an alternative <filename>skel</filename> directory
+            to override the default <filename>/etc/skel</filename>.
+          </para>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id="pam_mkhomedir-types">
+    <title>MODULE TYPES PROVIDED</title>
+    <para>
+      Only the <option>session</option> module type is provided.
+    </para>
+  </refsect1>
+
+  <refsect1 id="pam_mkhomedir-return_values">
+    <title>RETURN VALUES</title>
+    <variablelist>
+      <varlistentry>
+        <term>PAM_BUF_ERR</term>
+        <listitem>
+           <para>
+             Memory buffer error.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_PERM_DENIED</term>
+        <listitem>
+           <para>
+             Not enough permissions to create the new directory
+             or read the skel directory.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_USER_UNKNOWN</term>
+        <listitem>
+           <para>
+             User not known to the underlying authentication module.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_SUCCESS</term>
+        <listitem>
+           <para>
+             Environment variables were set.
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id="pam_mkhomedir-files">
+    <title>FILES</title>
+    <variablelist>
+      <varlistentry>
+        <term><filename>/etc/skel</filename></term>
+        <listitem>
+          <para>Default skel directory</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id='pam_mkhomedir-examples'>
+    <title>EXAMPLES</title>
+    <para>
+      A sample /etc/pam.d/login file:
+      <programlisting>
+  auth       requisite   pam_securetty.so
+  auth       sufficient  pam_ldap.so
+  auth       required    pam_unix.so
+  auth       required    pam_nologin.so
+  account    sufficient  pam_ldap.so
+  account    required    pam_unix.so
+  password   required    pam_unix.so
+  session    required    pam_mkhomedir.so skel=/etc/skel/ umask=0022
+  session    required    pam_unix.so
+  session    optional    pam_lastlog.so
+  session    optional    pam_mail.so standard
+      </programlisting>
+    </para>
+  </refsect1>
+
+
+  <refsect1 id="pam_mkhomedir-see_also">
+    <title>SEE ALSO</title>
+    <para>
+      <citerefentry>
+        <refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum>
+      </citerefentry>,
+      <citerefentry>
+        <refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum>
+      </citerefentry>.
+    </para>
+  </refsect1>
+
+  <refsect1 id="pam_mkhomedir-author">
+    <title>AUTHOR</title>
+    <para>
+      pam_mkhomedir was written by Jason Gunthorpe &lt;jgg@debian.org&gt;.
+    </para>
+  </refsect1>
+</refentry>
diff --git a/modules/pam_mkhomedir/pam_mkhomedir.c b/modules/pam_mkhomedir/pam_mkhomedir.c
new file mode 100644
index 0000000..cb773e8
--- /dev/null
+++ b/modules/pam_mkhomedir/pam_mkhomedir.c
@@ -0,0 +1,232 @@
+/* PAM Make Home Dir module
+
+   This module will create a users home directory if it does not exist
+   when the session begins. This allows users to be present in central
+   database (such as nis, kerb or ldap) without using a distributed
+   file system or pre-creating a large number of directories.
+
+   Here is a sample /etc/pam.d/login file for Debian GNU/Linux
+   2.1:
+
+   auth       requisite  pam_securetty.so
+   auth       sufficient pam_ldap.so
+   auth       required   pam_unix.so
+   auth       optional   pam_group.so
+   auth       optional   pam_mail.so
+   account    requisite  pam_time.so
+   account    sufficient pam_ldap.so
+   account    required   pam_unix.so
+   session    required   pam_mkhomedir.so skel=/etc/skel/ umask=0022
+   session    required   pam_unix.so
+   session    optional   pam_lastlog.so
+   password   required   pam_unix.so
+
+   Released under the GNU LGPL version 2 or later
+   Copyright (c) Red Hat, Inc. 2009
+   Originally written by Jason Gunthorpe <jgg@debian.org> Feb 1999
+   Structure taken from pam_lastlogin by Andrew Morgan
+     <morgan@parc.power.net> 1996
+ */
+
+#include "config.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <pwd.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <syslog.h>
+#include <signal.h>
+
+#include <security/pam_modules.h>
+#include <security/_pam_macros.h>
+#include <security/pam_modutil.h>
+#include <security/pam_ext.h>
+
+#include "pam_cc_compat.h"
+#include "pam_inline.h"
+
+/* argument parsing */
+#define MKHOMEDIR_DEBUG      020	/* be verbose about things */
+#define MKHOMEDIR_QUIET      040	/* keep quiet about things */
+
+struct options_t {
+  int ctrl;
+  const char *umask;
+  const char *skeldir;
+};
+typedef struct options_t options_t;
+
+static void
+_pam_parse (const pam_handle_t *pamh, int flags, int argc, const char **argv,
+	    options_t *opt)
+{
+   opt->ctrl = 0;
+   opt->umask = "0022";
+   opt->skeldir = "/etc/skel";
+
+   /* does the application require quiet? */
+   if ((flags & PAM_SILENT) == PAM_SILENT)
+      opt->ctrl |= MKHOMEDIR_QUIET;
+
+   /* step through arguments */
+   for (; argc-- > 0; ++argv)
+   {
+      const char *str;
+
+      if (!strcmp(*argv, "silent")) {
+	 opt->ctrl |= MKHOMEDIR_QUIET;
+      } else if (!strcmp(*argv, "debug")) {
+         opt->ctrl |= MKHOMEDIR_DEBUG;
+      } else if ((str = pam_str_skip_prefix(*argv, "umask=")) != NULL) {
+	 opt->umask = str;
+      } else if ((str = pam_str_skip_prefix(*argv, "skel=")) != NULL) {
+	 opt->skeldir = str;
+      } else {
+	 pam_syslog(pamh, LOG_ERR, "unknown option: %s", *argv);
+      }
+   }
+}
+
+/* Do the actual work of creating a home dir */
+static int
+create_homedir (pam_handle_t *pamh, options_t *opt,
+		const char *user, const char *dir)
+{
+   int retval, child;
+   struct sigaction newsa, oldsa;
+
+   /* Mention what is happening, if the notification fails that is OK */
+   if (!(opt->ctrl & MKHOMEDIR_QUIET))
+      pam_info(pamh, _("Creating directory '%s'."), dir);
+
+
+   D(("called."));
+
+   /*
+    * This code arranges that the demise of the child does not cause
+    * the application to receive a signal it is not expecting - which
+    * may kill the application or worse.
+    */
+   memset(&newsa, '\0', sizeof(newsa));
+   newsa.sa_handler = SIG_DFL;
+   sigaction(SIGCHLD, &newsa, &oldsa);
+
+   if (opt->ctrl & MKHOMEDIR_DEBUG) {
+        pam_syslog(pamh, LOG_DEBUG, "Executing mkhomedir_helper.");
+   }
+
+   /* fork */
+   child = fork();
+   if (child == 0) {
+	static char *envp[] = { NULL };
+	const char *args[] = { NULL, NULL, NULL, NULL, NULL };
+
+	if (pam_modutil_sanitize_helper_fds(pamh, PAM_MODUTIL_PIPE_FD,
+					    PAM_MODUTIL_PIPE_FD,
+					    PAM_MODUTIL_PIPE_FD) < 0)
+		_exit(PAM_SYSTEM_ERR);
+
+	/* exec the mkhomedir helper */
+	args[0] = MKHOMEDIR_HELPER;
+	args[1] = user;
+	args[2] = opt->umask;
+	args[3] = opt->skeldir;
+
+	DIAG_PUSH_IGNORE_CAST_QUAL;
+	execve(MKHOMEDIR_HELPER, (char **)args, envp);
+	DIAG_POP_IGNORE_CAST_QUAL;
+
+	/* should not get here: exit with error */
+	D(("helper binary is not available"));
+	_exit(PAM_SYSTEM_ERR);
+   } else if (child > 0) {
+	int rc;
+	while ((rc=waitpid(child, &retval, 0)) < 0 && errno == EINTR);
+	if (rc < 0) {
+	  pam_syslog(pamh, LOG_ERR, "waitpid failed: %m");
+	  retval = PAM_SYSTEM_ERR;
+	} else if (!WIFEXITED(retval)) {
+          pam_syslog(pamh, LOG_ERR, "mkhomedir_helper abnormal exit: %d", retval);
+          retval = PAM_SYSTEM_ERR;
+        } else {
+	  retval = WEXITSTATUS(retval);
+	}
+   } else {
+	D(("fork failed"));
+	pam_syslog(pamh, LOG_ERR, "fork failed: %m");
+	retval = PAM_SYSTEM_ERR;
+   }
+
+   sigaction(SIGCHLD, &oldsa, NULL);   /* restore old signal handler */
+
+   if (opt->ctrl & MKHOMEDIR_DEBUG) {
+        pam_syslog(pamh, LOG_DEBUG, "mkhomedir_helper returned %d", retval);
+   }
+
+   if (retval != PAM_SUCCESS && !(opt->ctrl & MKHOMEDIR_QUIET)) {
+	pam_error(pamh, _("Unable to create and initialize directory '%s'."),
+		  dir);
+   }
+
+   D(("returning %d", retval));
+   return retval;
+}
+
+/* --- authentication management functions (only) --- */
+
+int
+pam_sm_open_session (pam_handle_t *pamh, int flags, int argc,
+		     const char **argv)
+{
+   int retval;
+   options_t opt;
+   const void *user;
+   const struct passwd *pwd;
+   struct stat St;
+
+   /* Parse the flag values */
+   _pam_parse(pamh, flags, argc, argv, &opt);
+
+   /* Determine the user name so we can get the home directory */
+   retval = pam_get_item(pamh, PAM_USER, &user);
+   if (retval != PAM_SUCCESS || user == NULL || *(const char *)user == '\0')
+   {
+      pam_syslog(pamh, LOG_NOTICE, "Cannot obtain the user name.");
+      return PAM_USER_UNKNOWN;
+   }
+
+   /* Get the password entry */
+   pwd = pam_modutil_getpwnam (pamh, user);
+   if (pwd == NULL)
+   {
+      pam_syslog(pamh, LOG_NOTICE, "User unknown.");
+      D(("couldn't identify user %s", user));
+      return PAM_USER_UNKNOWN;
+   }
+
+   /* Stat the home directory, if something exists then we assume it is
+      correct and return a success*/
+   if (stat(pwd->pw_dir, &St) == 0) {
+      if (opt.ctrl & MKHOMEDIR_DEBUG) {
+          pam_syslog(pamh, LOG_DEBUG, "Home directory %s already exists.",
+              pwd->pw_dir);
+      }
+      return PAM_SUCCESS;
+   }
+
+   return create_homedir(pamh, &opt, user, pwd->pw_dir);
+}
+
+/* Ignore */
+int pam_sm_close_session (pam_handle_t * pamh UNUSED, int flags UNUSED,
+			  int argc UNUSED, const char **argv UNUSED)
+{
+   return PAM_SUCCESS;
+}
diff --git a/modules/pam_mkhomedir/tst-pam_mkhomedir b/modules/pam_mkhomedir/tst-pam_mkhomedir
new file mode 100755
index 0000000..5447883
--- /dev/null
+++ b/modules/pam_mkhomedir/tst-pam_mkhomedir
@@ -0,0 +1,2 @@
+#!/bin/sh
+../../tests/tst-dlopen .libs/pam_mkhomedir.so
diff --git a/modules/pam_mkhomedir/tst-pam_mkhomedir-retval.c b/modules/pam_mkhomedir/tst-pam_mkhomedir-retval.c
new file mode 100644
index 0000000..451d2e5
--- /dev/null
+++ b/modules/pam_mkhomedir/tst-pam_mkhomedir-retval.c
@@ -0,0 +1,110 @@
+/*
+ * Check pam_mkhomedir return values.
+ *
+ * Copyright (c) 2020 Dmitry V. Levin <ldv@altlinux.org>
+ */
+
+#include "test_assert.h"
+
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <pwd.h>
+#include <sys/stat.h>
+#include <security/pam_appl.h>
+
+#define MODULE_NAME "pam_mkhomedir"
+#define TEST_NAME "tst-" MODULE_NAME "-retval"
+
+static const char service_file[] = TEST_NAME ".service";
+static const char user_empty[] = "";
+static const char user_missing[] = ":";
+static struct pam_conv conv;
+
+int
+main(void)
+{
+	pam_handle_t *pamh = NULL;
+	FILE *fp;
+	struct passwd *pw;
+	struct stat st;
+	char cwd[PATH_MAX];
+
+	ASSERT_NE(NULL, getcwd(cwd, sizeof(cwd)));
+
+	/* PAM_USER_UNKNOWN */
+	ASSERT_NE(NULL, fp = fopen(service_file, "w"));
+	ASSERT_LT(0, fprintf(fp, "#%%PAM-1.0\n"
+			     "auth required %s/.libs/%s.so\n"
+			     "account required %s/.libs/%s.so\n"
+			     "password required %s/.libs/%s.so\n"
+			     "session required %s/.libs/%s.so\n",
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME));
+	ASSERT_EQ(0, fclose(fp));
+
+	ASSERT_EQ(PAM_SUCCESS,
+		  pam_start_confdir(service_file, user_empty,
+				    &conv, ".", &pamh));
+	ASSERT_NE(NULL, pamh);
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_authenticate(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_setcred(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_acct_mgmt(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_chauthtok(pamh, 0));
+	ASSERT_EQ(PAM_USER_UNKNOWN, pam_open_session(pamh, 0));
+	ASSERT_EQ(PAM_PERM_DENIED, pam_close_session(pamh, 0));
+	ASSERT_EQ(PAM_SUCCESS, pam_end(pamh, 0));
+	pamh = NULL;
+
+	ASSERT_EQ(PAM_SUCCESS,
+		  pam_start_confdir(service_file, user_missing,
+				    &conv, ".", &pamh));
+	ASSERT_NE(NULL, pamh);
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_authenticate(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_setcred(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_acct_mgmt(pamh, 0));
+	ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_chauthtok(pamh, 0));
+	ASSERT_EQ(PAM_USER_UNKNOWN, pam_open_session(pamh, 0));
+	ASSERT_EQ(PAM_PERM_DENIED, pam_close_session(pamh, 0));
+	ASSERT_EQ(PAM_SUCCESS, pam_end(pamh, 0));
+	pamh = NULL;
+
+	/* PAM_SUCCESS */
+	ASSERT_NE(NULL, fp = fopen(service_file, "w"));
+	ASSERT_LT(0, fprintf(fp, "#%%PAM-1.0\n"
+			     "auth required %s/.libs/%s.so debug\n"
+			     "account required %s/.libs/%s.so debug\n"
+			     "password required %s/.libs/%s.so debug\n"
+			     "session required %s/.libs/%s.so debug\n",
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME,
+			     cwd, MODULE_NAME));
+	ASSERT_EQ(0, fclose(fp));
+
+	if ((pw = getpwuid(geteuid())) != NULL &&
+	    pw->pw_dir != NULL &&
+	    stat(pw->pw_dir, &st) == 0 &&
+	    (st.st_mode & S_IFMT) == S_IFDIR) {
+		ASSERT_EQ(PAM_SUCCESS,
+			  pam_start_confdir(service_file, pw->pw_name,
+					    &conv, ".", &pamh));
+		ASSERT_NE(NULL, pamh);
+		ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_authenticate(pamh, 0));
+		ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_setcred(pamh, 0));
+		ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_acct_mgmt(pamh, 0));
+		ASSERT_EQ(PAM_MODULE_UNKNOWN, pam_chauthtok(pamh, 0));
+		ASSERT_EQ(PAM_SUCCESS, pam_open_session(pamh, 0));
+		ASSERT_EQ(PAM_SUCCESS, pam_close_session(pamh, 0));
+		ASSERT_EQ(PAM_SUCCESS, pam_end(pamh, 0));
+		pamh = NULL;
+	}
+
+	ASSERT_EQ(0, unlink(service_file));
+
+	return 0;
+}