Adding upstream version 1.4.0.upstream/1.4.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 2366 insertions, 0 deletions

diff --git a/modules/pam_sepermit/Makefile.am b/modules/pam_sepermit/Makefile.am
new file mode 100644
index 0000000..18a89b6
--- /dev/null
+++ b/modules/pam_sepermit/Makefile.am
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2005, 2006, 2007 Thorsten Kukuk <kukuk@thkukuk.de>
+# Copyright (c) 2008, 2009 Red Hat, Inc.
+#
+
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+
+EXTRA_DIST = $(XMLS)
+
+if HAVE_DOC
+dist_man_MANS = pam_sepermit.8 sepermit.conf.5
+endif
+XMLS = README.xml pam_sepermit.8.xml sepermit.conf.5.xml
+dist_check_SCRIPTS = tst-pam_sepermit
+TESTS = $(dist_check_SCRIPTS)
+
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+sepermitlockdir = ${localstatedir}/run/sepermit
+
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+	-I$(top_srcdir)/libpam_misc/include \
+	-D SEPERMIT_CONF_FILE=\"$(SCONFIGDIR)/sepermit.conf\" \
+	-D SEPERMIT_LOCKDIR=\"$(sepermitlockdir)\" $(WARN_CFLAGS)
+
+pam_sepermit_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBSELINUX@
+pam_sepermit_la_LDFLAGS = -no-undefined -avoid-version -module
+if HAVE_VERSIONING
+  pam_sepermit_la_LDFLAGS += -Wl,--version-script=$(srcdir)/../modules.map
+endif
+
+dist_secureconf_DATA = sepermit.conf
+securelib_LTLIBRARIES = pam_sepermit.la
+
+install-data-local:
+	mkdir -p $(DESTDIR)$(sepermitlockdir)
+
+if ENABLE_REGENERATE_MAN
+dist_noinst_DATA = README
+-include $(top_srcdir)/Make.xml.rules
+endif
diff --git a/modules/pam_sepermit/Makefile.in b/modules/pam_sepermit/Makefile.in
new file mode 100644
index 0000000..0de1354
--- /dev/null
+++ b/modules/pam_sepermit/Makefile.in
@@ -0,0 +1,1230 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright (c) 2005, 2006, 2007 Thorsten Kukuk <kukuk@thkukuk.de>
+# Copyright (c) 2008, 2009 Red Hat, Inc.
+#
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_VERSIONING_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/../modules.map
+subdir = modules/pam_sepermit
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/japhar_grep_cflags.m4 \
+	$(top_srcdir)/m4/jh_path_xml_catalog.m4 \
+	$(top_srcdir)/m4/ld-O1.m4 $(top_srcdir)/m4/ld-as-needed.m4 \
+	$(top_srcdir)/m4/ld-no-undefined.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libprelude.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_check_SCRIPTS) \
+	$(am__dist_noinst_DATA_DIST) $(dist_secureconf_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(securelibdir)" "$(DESTDIR)$(man5dir)" \
+	"$(DESTDIR)$(man8dir)" "$(DESTDIR)$(secureconfdir)"
+LTLIBRARIES = $(securelib_LTLIBRARIES)
+pam_sepermit_la_DEPENDENCIES = $(top_builddir)/libpam/libpam.la
+pam_sepermit_la_SOURCES = pam_sepermit.c
+pam_sepermit_la_OBJECTS = pam_sepermit.lo
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+pam_sepermit_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(pam_sepermit_la_LDFLAGS) $(LDFLAGS) \
+	-o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/pam_sepermit.Plo
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = pam_sepermit.c
+DIST_SOURCES = pam_sepermit.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man5dir = $(mandir)/man5
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__dist_noinst_DATA_DIST = README
+DATA = $(dist_noinst_DATA) $(dist_secureconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp \
+	$(top_srcdir)/build-aux/test-driver
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BROWSER = @BROWSER@
+BUILD_CFLAGS = @BUILD_CFLAGS@
+BUILD_CPPFLAGS = @BUILD_CPPFLAGS@
+BUILD_LDFLAGS = @BUILD_LDFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ECONF_CFLAGS = @ECONF_CFLAGS@
+ECONF_LIBS = @ECONF_LIBS@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FO2PDF = @FO2PDF@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBAUDIT = @LIBAUDIT@
+LIBCRACK = @LIBCRACK@
+LIBCRYPT = @LIBCRYPT@
+LIBDB = @LIBDB@
+LIBDL = @LIBDL@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBPRELUDE_CFLAGS = @LIBPRELUDE_CFLAGS@
+LIBPRELUDE_CONFIG = @LIBPRELUDE_CONFIG@
+LIBPRELUDE_CONFIG_PREFIX = @LIBPRELUDE_CONFIG_PREFIX@
+LIBPRELUDE_LDFLAGS = @LIBPRELUDE_LDFLAGS@
+LIBPRELUDE_LIBS = @LIBPRELUDE_LIBS@
+LIBPRELUDE_PREFIX = @LIBPRELUDE_PREFIX@
+LIBPRELUDE_PTHREAD_CFLAGS = @LIBPRELUDE_PTHREAD_CFLAGS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NIS_CFLAGS = @NIS_CFLAGS@
+NIS_LIBS = @NIS_LIBS@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NSL_CFLAGS = @NSL_CFLAGS@
+NSL_LIBS = @NSL_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PIE_CFLAGS = @PIE_CFLAGS@
+PIE_LDFLAGS = @PIE_LDFLAGS@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SCONFIGDIR = @SCONFIGDIR@
+SECUREDIR = @SECUREDIR@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRINGPARAM_VENDORDIR = @STRINGPARAM_VENDORDIR@
+STRIP = @STRIP@
+TIRPC_CFLAGS = @TIRPC_CFLAGS@
+TIRPC_LIBS = @TIRPC_LIBS@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARN_CFLAGS = @WARN_CFLAGS@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+XMLCATALOG = @XMLCATALOG@
+XMLLINT = @XMLLINT@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libc_cv_fpie = @libc_cv_fpie@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pam_cv_ld_O1 = @pam_cv_ld_O1@
+pam_cv_ld_as_needed = @pam_cv_ld_as_needed@
+pam_cv_ld_no_undefined = @pam_cv_ld_no_undefined@
+pam_xauth_path = @pam_xauth_path@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+CLEANFILES = *~
+MAINTAINERCLEANFILES = $(MANS) README
+EXTRA_DIST = $(XMLS)
+@HAVE_DOC_TRUE@dist_man_MANS = pam_sepermit.8 sepermit.conf.5
+XMLS = README.xml pam_sepermit.8.xml sepermit.conf.5.xml
+dist_check_SCRIPTS = tst-pam_sepermit
+TESTS = $(dist_check_SCRIPTS)
+securelibdir = $(SECUREDIR)
+secureconfdir = $(SCONFIGDIR)
+sepermitlockdir = ${localstatedir}/run/sepermit
+AM_CFLAGS = -I$(top_srcdir)/libpam/include -I$(top_srcdir)/libpamc/include \
+	-I$(top_srcdir)/libpam_misc/include \
+	-D SEPERMIT_CONF_FILE=\"$(SCONFIGDIR)/sepermit.conf\" \
+	-D SEPERMIT_LOCKDIR=\"$(sepermitlockdir)\" $(WARN_CFLAGS)
+
+pam_sepermit_la_LIBADD = $(top_builddir)/libpam/libpam.la @LIBSELINUX@
+pam_sepermit_la_LDFLAGS = -no-undefined -avoid-version -module \
+	$(am__append_1)
+dist_secureconf_DATA = sepermit.conf
+securelib_LTLIBRARIES = pam_sepermit.la
+@ENABLE_REGENERATE_MAN_TRUE@dist_noinst_DATA = README
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modules/pam_sepermit/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu modules/pam_sepermit/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+install-securelibLTLIBRARIES: $(securelib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(securelibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(securelibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(securelibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(securelibdir)"; \
+	}
+
+uninstall-securelibLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(securelib_LTLIBRARIES)'; test -n "$(securelibdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(securelibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(securelibdir)/$$f"; \
+	done
+
+clean-securelibLTLIBRARIES:
+	-test -z "$(securelib_LTLIBRARIES)" || rm -f $(securelib_LTLIBRARIES)
+	@list='$(securelib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+pam_sepermit.la: $(pam_sepermit_la_OBJECTS) $(pam_sepermit_la_DEPENDENCIES) $(EXTRA_pam_sepermit_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(pam_sepermit_la_LINK) -rpath $(securelibdir) $(pam_sepermit_la_OBJECTS) $(pam_sepermit_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pam_sepermit.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man5: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+install-dist_secureconfDATA: $(dist_secureconf_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_secureconf_DATA)'; test -n "$(secureconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(secureconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(secureconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(secureconfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(secureconfdir)" || exit $$?; \
+	done
+
+uninstall-dist_secureconfDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_secureconf_DATA)'; test -n "$(secureconfdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(secureconfdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS: $(dist_check_SCRIPTS)
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all $(dist_check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+tst-pam_sepermit.log: tst-pam_sepermit
+	@p='tst-pam_sepermit'; \
+	b='tst-pam_sepermit'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(MANS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(securelibdir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(secureconfdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-securelibLTLIBRARIES \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/pam_sepermit.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-dist_secureconfDATA \
+	install-man install-securelibLTLIBRARIES
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man5 install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/pam_sepermit.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_secureconfDATA uninstall-man \
+	uninstall-securelibLTLIBRARIES
+
+uninstall-man: uninstall-man5 uninstall-man8
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-TESTS \
+	check-am clean clean-generic clean-libtool \
+	clean-securelibLTLIBRARIES cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-data-local install-dist_secureconfDATA \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-man5 install-man8 install-pdf \
+	install-pdf-am install-ps install-ps-am \
+	install-securelibLTLIBRARIES install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	recheck tags tags-am uninstall uninstall-am \
+	uninstall-dist_secureconfDATA uninstall-man uninstall-man5 \
+	uninstall-man8 uninstall-securelibLTLIBRARIES
+
+.PRECIOUS: Makefile
+
+
+install-data-local:
+	mkdir -p $(DESTDIR)$(sepermitlockdir)
+@ENABLE_REGENERATE_MAN_TRUE@-include $(top_srcdir)/Make.xml.rules
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/modules/pam_sepermit/README b/modules/pam_sepermit/README
new file mode 100644
index 0000000..cd697bb
--- /dev/null
+++ b/modules/pam_sepermit/README
@@ -0,0 +1,48 @@
+pam_sepermit — PAM module to allow/deny login depending on SELinux enforcement
+state
+
+━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+DESCRIPTION
+
+The pam_sepermit module allows or denies login depending on SELinux enforcement
+state.
+
+When the user which is logging in matches an entry in the config file he is
+allowed access only when the SELinux is in enforcing mode. Otherwise he is
+denied access. For users not matching any entry in the config file the
+pam_sepermit module returns PAM_IGNORE return value.
+
+The config file contains a list of user names one per line with optional
+arguments. If the name is prefixed with @ character it means that all users in
+the group name match. If it is prefixed with a % character the SELinux user is
+used to match against the name instead of the account name. Note that when
+SELinux is disabled the SELinux user assigned to the account cannot be
+determined. This means that such entries are never matched when SELinux is
+disabled and pam_sepermit will return PAM_IGNORE.
+
+See sepermit.conf(5) for details.
+
+OPTIONS
+
+debug
+
+    Turns on debugging via syslog(3).
+
+conf=/path/to/config/file
+
+    Path to alternative config file overriding the default.
+
+EXAMPLES
+
+auth     [success=done ignore=ignore default=bad] pam_sepermit.so
+auth     required  pam_unix.so
+account  required  pam_unix.so
+session  required  pam_permit.so
+
+
+AUTHOR
+
+pam_sepermit and this manual page were written by Tomas Mraz
+<tmraz@redhat.com>.
+
diff --git a/modules/pam_sepermit/README.xml b/modules/pam_sepermit/README.xml
new file mode 100644
index 0000000..bb65951
--- /dev/null
+++ b/modules/pam_sepermit/README.xml
@@ -0,0 +1,41 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+"http://www.docbook.org/xml/4.3/docbookx.dtd"
+[
+<!--
+<!ENTITY pamaccess SYSTEM "pam_sepermit.8.xml">
+-->
+]>
+
+<article>
+
+  <articleinfo>
+
+    <title>
+      <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_sepermit.8.xml" xpointer='xpointer(//refnamediv[@id = "pam_sepermit-name"]/*)'/>
+    </title>
+
+  </articleinfo>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-description"]/*)'/>
+  </section>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-options"]/*)'/>
+  </section>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-examples"]/*)'/>
+  </section>
+
+  <section>
+    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="pam_sepermit.8.xml" xpointer='xpointer(//refsect1[@id = "pam_sepermit-author"]/*)'/>
+  </section>
+
+</article>
diff --git a/modules/pam_sepermit/pam_sepermit.8 b/modules/pam_sepermit/pam_sepermit.8
new file mode 100644
index 0000000..37460ab
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.8
@@ -0,0 +1,131 @@
+'\" t
+.\"     Title: pam_sepermit
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\"      Date: 06/08/2020
+.\"    Manual: Linux-PAM Manual
+.\"    Source: Linux-PAM Manual
+.\"  Language: English
+.\"
+.TH "PAM_SEPERMIT" "8" "06/08/2020" "Linux-PAM Manual" "Linux\-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+pam_sepermit \- PAM module to allow/deny login depending on SELinux enforcement state
+.SH "SYNOPSIS"
+.HP \w'\fBpam_sepermit\&.so\fR\ 'u
+\fBpam_sepermit\&.so\fR [debug] [conf=\fI/path/to/config/file\fR]
+.SH "DESCRIPTION"
+.PP
+The pam_sepermit module allows or denies login depending on SELinux enforcement state\&.
+.PP
+When the user which is logging in matches an entry in the config file he is allowed access only when the SELinux is in enforcing mode\&. Otherwise he is denied access\&. For users not matching any entry in the config file the pam_sepermit module returns PAM_IGNORE return value\&.
+.PP
+The config file contains a list of user names one per line with optional arguments\&. If the
+\fIname\fR
+is prefixed with
+\fI@\fR
+character it means that all users in the group
+\fIname\fR
+match\&. If it is prefixed with a
+\fI%\fR
+character the SELinux user is used to match against the
+\fIname\fR
+instead of the account name\&. Note that when SELinux is disabled the SELinux user assigned to the account cannot be determined\&. This means that such entries are never matched when SELinux is disabled and pam_sepermit will return PAM_IGNORE\&.
+.PP
+See
+\fBsepermit.conf\fR(5)
+for details\&.
+.SH "OPTIONS"
+.PP
+\fBdebug\fR
+.RS 4
+Turns on debugging via
+\fBsyslog\fR(3)\&.
+.RE
+.PP
+\fBconf=\fR\fB\fI/path/to/config/file\fR\fR
+.RS 4
+Path to alternative config file overriding the default\&.
+.RE
+.SH "MODULE TYPES PROVIDED"
+.PP
+The
+\fBauth\fR
+and
+\fBaccount\fR
+module types are provided\&.
+.SH "RETURN VALUES"
+.PP
+PAM_AUTH_ERR
+.RS 4
+SELinux is disabled or in the permissive mode and the user matches\&.
+.RE
+.PP
+PAM_SUCCESS
+.RS 4
+SELinux is in the enforcing mode and the user matches\&.
+.RE
+.PP
+PAM_IGNORE
+.RS 4
+The user does not match any entry in the config file\&.
+.RE
+.PP
+PAM_USER_UNKNOWN
+.RS 4
+The module was unable to determine the user\*(Aqs name\&.
+.RE
+.PP
+PAM_SERVICE_ERR
+.RS 4
+Error during reading or parsing the config file\&.
+.RE
+.SH "FILES"
+.PP
+/etc/security/sepermit\&.conf
+.RS 4
+Default configuration file
+.RE
+.SH "EXAMPLES"
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+auth     [success=done ignore=ignore default=bad] pam_sepermit\&.so
+auth     required  pam_unix\&.so
+account  required  pam_unix\&.so
+session  required  pam_permit\&.so
+    
+.fi
+.if n \{\
+.RE
+.\}
+.SH "SEE ALSO"
+.PP
+\fBsepermit.conf\fR(5),
+\fBpam.conf\fR(5),
+\fBpam.d\fR(5),
+\fBpam\fR(8)
+\fBselinux\fR(8)
+.SH "AUTHOR"
+.PP
+pam_sepermit and this manual page were written by Tomas Mraz <tmraz@redhat\&.com>\&.
diff --git a/modules/pam_sepermit/pam_sepermit.8.xml b/modules/pam_sepermit/pam_sepermit.8.xml
new file mode 100644
index 0000000..30d9cc5
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.8.xml
@@ -0,0 +1,194 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+	"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
+
+<refentry id="pam_sepermit">
+
+  <refmeta>
+    <refentrytitle>pam_sepermit</refentrytitle>
+    <manvolnum>8</manvolnum>
+    <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo>
+  </refmeta>
+
+  <refnamediv id="pam_sepermit-name">
+    <refname>pam_sepermit</refname>
+    <refpurpose>PAM module to allow/deny login depending on SELinux enforcement state</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis id="pam_sepermit-cmdsynopsis">
+      <command>pam_sepermit.so</command>
+      <arg choice="opt">
+	debug
+      </arg>
+      <arg choice="opt">
+	conf=<replaceable>/path/to/config/file</replaceable>
+      </arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1 id="pam_sepermit-description">
+    <title>DESCRIPTION</title>
+    <para>
+      The pam_sepermit module allows or denies login depending on SELinux
+      enforcement state.
+    </para>
+    <para>
+      When the user which is logging in matches an entry in the config file
+      he is allowed access only when the SELinux is in enforcing mode. Otherwise
+      he is denied access. For users not matching any entry in the config file
+      the pam_sepermit module returns PAM_IGNORE return value.
+    </para>
+    <para>
+      The config file contains a list of user names one per line with optional arguments. If the
+      <replaceable>name</replaceable> is prefixed with <emphasis>@</emphasis> character it means that all
+      users in the group <replaceable>name</replaceable> match. If it is prefixed
+      with a <emphasis>%</emphasis> character the SELinux user is used to match against the <replaceable>name</replaceable>
+      instead of the account name. Note that when SELinux is disabled the
+      SELinux user assigned to the account cannot be determined. This means that
+      such entries are never matched when SELinux is disabled and pam_sepermit
+      will return PAM_IGNORE.
+    </para>
+    <para>
+      See <citerefentry>
+      <refentrytitle>sepermit.conf</refentrytitle><manvolnum>5</manvolnum>
+      </citerefentry> for details.
+    </para>
+
+  </refsect1>
+
+  <refsect1 id="pam_sepermit-options">
+    <title>OPTIONS</title>
+    <variablelist>
+      <varlistentry>
+        <term>
+          <option>debug</option>
+        </term>
+        <listitem>
+          <para>
+           Turns on debugging via
+	    <citerefentry>
+              <refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum>
+            </citerefentry>.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>
+          <option>conf=<replaceable>/path/to/config/file</replaceable></option>
+        </term>
+        <listitem>
+          <para>
+            Path to alternative config file overriding the default.
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id="pam_sepermit-types">
+    <title>MODULE TYPES PROVIDED</title>
+    <para>
+      The <option>auth</option> and <option>account</option>
+      module types are provided.
+    </para>
+  </refsect1>
+
+  <refsect1 id='pam_sepermit-return_values'>
+    <title>RETURN VALUES</title>
+    <variablelist>
+      <varlistentry>
+        <term>PAM_AUTH_ERR</term>
+        <listitem>
+          <para>
+            SELinux is disabled or in the permissive mode and the user
+            matches.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_SUCCESS</term>
+        <listitem>
+          <para>
+            SELinux is in the enforcing mode and the user matches.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_IGNORE</term>
+        <listitem>
+          <para>
+            The user does not match any entry in the config file.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_USER_UNKNOWN</term>
+        <listitem>
+          <para>
+            The module was unable to determine the user's name.
+          </para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term>PAM_SERVICE_ERR</term>
+        <listitem>
+          <para>
+            Error during reading or parsing the config file.
+          </para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id="pam_sepermit-files">
+    <title>FILES</title>
+    <variablelist>
+      <varlistentry>
+        <term><filename>/etc/security/sepermit.conf</filename></term>
+        <listitem>
+          <para>Default configuration file</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1 id='pam_sepermit-examples'>
+    <title>EXAMPLES</title>
+    <programlisting>
+auth     [success=done ignore=ignore default=bad] pam_sepermit.so
+auth     required  pam_unix.so
+account  required  pam_unix.so
+session  required  pam_permit.so
+    </programlisting>
+  </refsect1>
+
+  <refsect1 id='pam_sepermit-see_also'>
+    <title>SEE ALSO</title>
+    <para>
+      <citerefentry>
+	<refentrytitle>sepermit.conf</refentrytitle><manvolnum>5</manvolnum>
+      </citerefentry>,
+      <citerefentry>
+	<refentrytitle>pam.conf</refentrytitle><manvolnum>5</manvolnum>
+      </citerefentry>,
+      <citerefentry>
+	<refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum>
+      </citerefentry>,
+      <citerefentry>
+	<refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum>
+      </citerefentry>
+      <citerefentry>
+	<refentrytitle>selinux</refentrytitle><manvolnum>8</manvolnum>
+      </citerefentry>
+    </para>
+  </refsect1>
+
+  <refsect1 id='pam_sepermit-author'>
+    <title>AUTHOR</title>
+      <para>
+        pam_sepermit and this manual page were written by Tomas Mraz &lt;tmraz@redhat.com&gt;.
+      </para>
+  </refsect1>
+
+</refentry>
diff --git a/modules/pam_sepermit/pam_sepermit.c b/modules/pam_sepermit/pam_sepermit.c
new file mode 100644
index 0000000..f7d98d5
--- /dev/null
+++ b/modules/pam_sepermit/pam_sepermit.c
@@ -0,0 +1,440 @@
+/******************************************************************************
+ * A module for Linux-PAM that allows/denies access based on SELinux state.
+ *
+ * Copyright (c) 2007, 2008, 2009 Red Hat, Inc.
+ * Originally written by Tomas Mraz <tmraz@redhat.com>
+ * Contributions by Dan Walsh <dwalsh@redhat.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, and the entire permission notice in its entirety,
+ *    including the disclaimer of warranties.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote
+ *    products derived from this software without specific prior
+ *    written permission.
+ *
+ * ALTERNATIVELY, this product may be distributed under the terms of
+ * the GNU Public License, in which case the provisions of the GPL are
+ * required INSTEAD OF the above restrictions.  (This clause is
+ * necessary due to a potential bad interaction between the GPL and
+ * the restrictions contained in a BSD-style copyright.)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "config.h"
+
+#include <errno.h>
+#include <pwd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <syslog.h>
+#include <ctype.h>
+#include <signal.h>
+#include <limits.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+
+#include <security/pam_modules.h>
+#include <security/_pam_macros.h>
+#include <security/pam_modutil.h>
+#include <security/pam_ext.h>
+
+#include <selinux/selinux.h>
+
+#define MODULE "pam_sepermit"
+#define OPT_DELIM ":"
+
+struct lockfd {
+	uid_t uid;
+	int fd;
+        int debug;
+};
+
+#define PROC_BASE "/proc"
+#define MAX_NAMES (int)(sizeof(unsigned long)*8)
+
+static int
+match_process_uid(pid_t pid, uid_t uid)
+{
+	char buf[128];
+	uid_t puid;
+	FILE *f;
+	int re = 0;
+
+	snprintf (buf, sizeof buf, PROC_BASE "/%d/status", pid);
+	if (!(f = fopen (buf, "r")))
+		return 0;
+
+	while (fgets(buf, sizeof buf, f)) {
+		if (sscanf (buf, "Uid:\t%d", &puid)) {
+			re = uid == puid;
+			break;
+		}
+	}
+	fclose(f);
+	return re;
+}
+
+static int
+check_running (pam_handle_t *pamh, uid_t uid, int killall, int debug)
+{
+	DIR *dir;
+	struct dirent *de;
+	pid_t *pid_table, pid, self;
+	int i;
+	int pids, max_pids;
+	int running = 0;
+	self = getpid();
+	if (!(dir = opendir(PROC_BASE))) {
+		pam_syslog(pamh, LOG_ERR, "Failed to open proc directory file %s:", PROC_BASE);
+		return -1;
+	}
+	max_pids = 256;
+	pid_table = malloc(max_pids * sizeof (pid_t));
+	if (!pid_table) {
+		(void)closedir(dir);
+		pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+		return -1;
+	}
+	pids = 0;
+	while ((de = readdir (dir)) != NULL) {
+		if (!(pid = (pid_t)atoi(de->d_name)) || pid == self)
+			continue;
+
+		if (pids == max_pids) {
+			pid_t *npt;
+
+			if (!(npt = realloc(pid_table, 2*pids*sizeof(pid_t)))) {
+				free(pid_table);
+				(void)closedir(dir);
+				pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+				return -1;
+			}
+			pid_table = npt;
+			max_pids *= 2;
+		}
+		pid_table[pids++] = pid;
+	}
+
+	(void)closedir(dir);
+
+	for (i = 0; i < pids; i++) {
+		pid_t id;
+
+		if (match_process_uid(pid_table[i], uid) == 0)
+			continue;
+		id = pid_table[i];
+
+		if (killall) {
+			if (debug)
+				pam_syslog(pamh, LOG_NOTICE, "Attempting to kill %d", id);
+			kill(id, SIGKILL);
+		}
+		running++;
+	}
+
+	free(pid_table);
+	return running;
+}
+
+/*
+ * This function reads the loginuid from the /proc system. It returns
+ * (uid_t)-1 on failure.
+ */
+static uid_t get_loginuid(pam_handle_t *pamh)
+{
+	int fd, count;
+	char loginuid[24];
+	char *eptr;
+	uid_t rv = (uid_t)-1;
+
+	fd = open("/proc/self/loginuid", O_NOFOLLOW|O_RDONLY);
+	if (fd < 0) {
+		if (errno != ENOENT) {
+			pam_syslog(pamh, LOG_ERR,
+				   "Cannot open /proc/self/loginuid: %m");
+		}
+		return rv;
+	}
+	if ((count = pam_modutil_read(fd, loginuid, sizeof(loginuid)-1)) < 1) {
+		close(fd);
+		return rv;
+	}
+	loginuid[count] = '\0';
+	close(fd);
+
+	errno = 0;
+	rv = strtoul(loginuid, &eptr, 10);
+	if (errno != 0 || eptr == loginuid)
+		rv = (uid_t) -1;
+
+	return rv;
+}
+
+static void
+sepermit_unlock(pam_handle_t *pamh, void *plockfd, int error_status UNUSED)
+{
+	struct lockfd *lockfd = plockfd;
+	struct flock fl;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.l_type = F_UNLCK;
+	fl.l_whence = SEEK_SET;
+
+	if (lockfd->debug)
+		pam_syslog(pamh, LOG_ERR, "Unlocking fd: %d uid: %d", lockfd->fd, lockfd->uid);
+
+	/* Don't kill uid==0 */
+	if (lockfd->uid)
+		/* This is a DOS but it prevents an app from forking to prevent killing */
+		while(check_running(pamh, lockfd->uid, 1, lockfd->debug) > 0)
+			continue;
+
+	(void)fcntl(lockfd->fd, F_SETLK, &fl);
+	(void)close(lockfd->fd);
+	free(lockfd);
+}
+
+static int
+sepermit_lock(pam_handle_t *pamh, const char *user, int debug)
+{
+	char buf[PATH_MAX];
+	struct flock fl;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.l_type = F_WRLCK;
+	fl.l_whence = SEEK_SET;
+
+	struct passwd *pw = pam_modutil_getpwnam( pamh, user );
+	if (!pw) {
+		pam_syslog(pamh, LOG_NOTICE, "Unable to find uid for user %s",
+			   user);
+		return -1;
+	}
+	if (check_running(pamh, pw->pw_uid, 0, debug) > 0)  {
+		pam_syslog(pamh, LOG_ERR, "User %s processes are running. Exclusive login not allowed", user);
+		return -1;
+	}
+
+	snprintf(buf, sizeof(buf), "%s/%d.lock", SEPERMIT_LOCKDIR, pw->pw_uid);
+	int fd = open(buf, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR);
+	if (fd < 0) {
+		pam_syslog(pamh, LOG_ERR, "Unable to open lock file %s/%d.lock", SEPERMIT_LOCKDIR, pw->pw_uid);
+		return -1;
+	}
+
+	/* Need to close on exec */
+	fcntl(fd, F_SETFD, FD_CLOEXEC);
+
+	if (fcntl(fd, F_SETLK, &fl) == -1) {
+		pam_syslog(pamh, LOG_ERR, "User %s with exclusive login already logged in", user);
+		close(fd);
+		return -1;
+	}
+	struct lockfd *lockfd=calloc(1, sizeof(struct lockfd));
+	if (!lockfd) {
+		close(fd);
+		pam_syslog(pamh, LOG_CRIT, "Memory allocation error");
+		return -1;
+	}
+	lockfd->uid = pw->pw_uid;
+	lockfd->debug = debug;
+	lockfd->fd=fd;
+        pam_set_data(pamh, MODULE, lockfd, sepermit_unlock);
+	return 0;
+}
+
+/* return 0 when matched, -1 when unmatched, pam error otherwise */
+static int
+sepermit_match(pam_handle_t *pamh, const char *cfgfile, const char *user,
+	       const char *seuser, int debug, int *sense)
+{
+	FILE *f;
+	char *line = NULL;
+	char *start;
+	size_t len = 0;
+	int matched = 0;
+	int exclusive = 0;
+	int ignore = 0;
+
+	f = fopen(cfgfile, "r");
+
+	if (!f) {
+		pam_syslog(pamh, LOG_ERR, "Failed to open config file %s: %m", cfgfile);
+		return PAM_SERVICE_ERR;
+	}
+
+	while (!matched && getline(&line, &len, f) != -1) {
+		size_t n;
+		char *sptr;
+		char *opt;
+
+		if (line[0] == '#')
+			continue;
+
+		start = line;
+		while (isspace(*start))
+			++start;
+		n = strlen(start);
+		while (n > 0 && isspace(start[n-1])) {
+			--n;
+		}
+		if (n == 0)
+			continue;
+
+		start[n] = '\0';
+		start = strtok_r(start, OPT_DELIM, &sptr);
+
+		switch (start[0]) {
+			case '@':
+				++start;
+				if (debug)
+					pam_syslog(pamh, LOG_NOTICE, "Matching user %s against group %s", user, start);
+				if (pam_modutil_user_in_group_nam_nam(pamh, user, start)) {
+					matched = 1;
+				}
+				break;
+			case '%':
+				if (seuser == NULL)
+					break;
+				++start;
+				if (debug)
+					pam_syslog(pamh, LOG_NOTICE, "Matching seuser %s against seuser %s", seuser, start);
+				if (strcmp(seuser, start) == 0) {
+					matched = 1;
+				}
+				break;
+			default:
+				if (debug)
+					pam_syslog(pamh, LOG_NOTICE, "Matching user %s against user %s", user, start);
+				if (strcmp(user, start) == 0) {
+					matched = 1;
+				}
+		}
+		if (matched)
+			while ((opt=strtok_r(NULL, OPT_DELIM, &sptr)) != NULL) {
+				if (strcmp(opt, "exclusive") == 0)
+					exclusive = 1;
+				else if (strcmp(opt, "ignore") == 0)
+					ignore = 1;
+				else if (debug) {
+					pam_syslog(pamh, LOG_NOTICE, "Unknown user option: %s", opt);
+				}
+			}
+	}
+
+	free(line);
+	fclose(f);
+	if (matched) {
+		if (*sense == PAM_SUCCESS) {
+			if (ignore)
+				*sense = PAM_IGNORE;
+			if (geteuid() == 0 && exclusive && get_loginuid(pamh) == (uid_t)-1)
+				if (sepermit_lock(pamh, user, debug) < 0)
+					*sense = PAM_AUTH_ERR;
+		}
+		return 0;
+	}
+	else
+		return -1;
+}
+
+int
+pam_sm_authenticate(pam_handle_t *pamh, int flags UNUSED,
+		    int argc, const char **argv)
+{
+	int i;
+	int rv;
+	int debug = 0;
+	int sense = PAM_AUTH_ERR;
+	const char *user = NULL;
+	char *seuser = NULL;
+	char *level = NULL;
+	const char *cfgfile = SEPERMIT_CONF_FILE;
+
+	/* Parse arguments. */
+	for (i = 0; i < argc; i++) {
+		if (strcmp(argv[i], "debug") == 0) {
+			debug = 1;
+		}
+		if (strcmp(argv[i], "conf=") == 0) {
+			cfgfile = argv[i] + 5;
+		}
+	}
+
+	if (debug)
+		pam_syslog(pamh, LOG_NOTICE, "Parsing config file: %s", cfgfile);
+
+	if (pam_get_user(pamh, &user, NULL) != PAM_SUCCESS || *user == '\0') {
+		pam_syslog(pamh, LOG_NOTICE, "cannot determine user name");
+		return PAM_USER_UNKNOWN;
+	}
+
+	if (is_selinux_enabled() > 0) {
+		if (security_getenforce() == 1) {
+			if (debug)
+				pam_syslog(pamh, LOG_NOTICE, "Enforcing mode, access will be allowed on match");
+			sense = PAM_SUCCESS;
+		}
+	}
+
+	if (getseuserbyname(user, &seuser, &level) != 0) {
+		seuser = NULL;
+		level = NULL;
+		pam_syslog(pamh, LOG_ERR, "getseuserbyname failed: %m");
+	}
+
+	if (debug && sense != PAM_SUCCESS)
+		pam_syslog(pamh, LOG_NOTICE, "Access will not be allowed on match");
+
+	rv = sepermit_match(pamh, cfgfile, user, seuser, debug, &sense);
+
+	if (debug)
+		pam_syslog(pamh, LOG_NOTICE, "sepermit_match returned: %d", rv);
+
+	free(seuser);
+	free(level);
+
+	switch (rv) {
+		case -1:
+			return PAM_IGNORE;
+		case 0:
+			return sense;
+	}
+
+	return rv;
+}
+
+int
+pam_sm_setcred (pam_handle_t *pamh UNUSED, int flags UNUSED,
+                int argc UNUSED, const char **argv UNUSED)
+{
+	return PAM_IGNORE;
+}
+
+int
+pam_sm_acct_mgmt(pam_handle_t *pamh, int flags,
+		     int argc, const char **argv)
+{
+	return pam_sm_authenticate(pamh, flags, argc, argv);
+}
diff --git a/modules/pam_sepermit/sepermit.conf b/modules/pam_sepermit/sepermit.conf
new file mode 100644
index 0000000..951f3df
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf
@@ -0,0 +1,11 @@
+# /etc/security/sepermit.conf
+#
+# Each line contains either:
+#        - an user name
+#        - a group name, with @group syntax
+#        - a SELinux user name, with %seuser syntax
+# Each line can contain optional arguments separated by :
+# The possible arguments are:
+#        - exclusive - only single login session will
+#          be allowed for the user and the user's processes
+#          will be killed on logout
diff --git a/modules/pam_sepermit/sepermit.conf.5 b/modules/pam_sepermit/sepermit.conf.5
new file mode 100644
index 0000000..f2b5d09
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf.5
@@ -0,0 +1,117 @@
+'\" t
+.\"     Title: sepermit.conf
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\"      Date: 06/08/2020
+.\"    Manual: Linux-PAM Manual
+.\"    Source: Linux-PAM Manual
+.\"  Language: English
+.\"
+.TH "SEPERMIT\&.CONF" "5" "06/08/2020" "Linux-PAM Manual" "Linux\-PAM Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+sepermit.conf \- configuration file for the pam_sepermit module
+.SH "DESCRIPTION"
+.PP
+The lines of the configuration file have the following syntax:
+.PP
+\fI<user>\fR[:\fI<option>\fR:\fI<option>\fR\&.\&.\&.]
+.PP
+The
+\fBuser\fR
+can be specified in the following manner:
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a username
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a groupname, with
+\fB@group\fR
+syntax\&. This should not be confused with netgroups\&.
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+a SELinux user name with
+\fB%seuser\fR
+syntax\&.
+.RE
+.PP
+The recognized options are:
+.PP
+\fBexclusive\fR
+.RS 4
+Only single login session will be allowed for the user and the user\*(Aqs processes will be killed on logout\&.
+.RE
+.PP
+\fBignore\fR
+.RS 4
+The module will never return PAM_SUCCESS status for the user\&. It will return PAM_IGNORE if SELinux is in the enforcing mode, and PAM_AUTH_ERR otherwise\&. It is useful if you want to support passwordless guest users and other confined users with passwords simultaneously\&.
+.RE
+.PP
+The lines which start with # character are comments and are ignored\&.
+.SH "EXAMPLES"
+.PP
+These are some example lines which might be specified in
+/etc/security/sepermit\&.conf\&.
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+%guest_u:exclusive
+%staff_u:ignore
+%user_u:ignore
+    
+.fi
+.if n \{\
+.RE
+.\}
+.SH "SEE ALSO"
+.PP
+\fBpam_sepermit\fR(8),
+\fBpam.d\fR(5),
+\fBpam\fR(8),
+\fBselinux\fR(8),
+.SH "AUTHOR"
+.PP
+pam_sepermit and this manual page were written by Tomas Mraz <tmraz@redhat\&.com>
diff --git a/modules/pam_sepermit/sepermit.conf.5.xml b/modules/pam_sepermit/sepermit.conf.5.xml
new file mode 100644
index 0000000..511480f
--- /dev/null
+++ b/modules/pam_sepermit/sepermit.conf.5.xml
@@ -0,0 +1,110 @@
+<?xml version="1.0" encoding='UTF-8'?>
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+        "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
+
+<refentry id="sepermit.conf">
+
+  <refmeta>
+    <refentrytitle>sepermit.conf</refentrytitle>
+    <manvolnum>5</manvolnum>
+    <refmiscinfo class="sectdesc">Linux-PAM Manual</refmiscinfo>
+  </refmeta>
+
+  <refnamediv>
+    <refname>sepermit.conf</refname>
+    <refpurpose>configuration file for the pam_sepermit module</refpurpose>
+  </refnamediv>
+
+  <refsect1 id='sepermit.conf-description'>
+    <title>DESCRIPTION</title>
+    <para>
+      The lines of the configuration file have the following syntax:
+    </para>
+    <para>
+      <replaceable>&lt;user&gt;</replaceable>[:<replaceable>&lt;option&gt;</replaceable>:<replaceable>&lt;option&gt;</replaceable>...]
+    </para>
+    <para>
+      The <emphasis remap='B'>user</emphasis> can be specified in the following manner:
+    </para>
+    <itemizedlist>
+        <listitem>
+              <para>
+                a username
+              </para>
+        </listitem>
+        <listitem>
+              <para>
+                a groupname, with <emphasis remap='B'>@group</emphasis> syntax.
+                This should not be confused with netgroups.
+              </para>
+        </listitem>
+        <listitem>
+              <para>
+                a SELinux user name with <emphasis remap='B'>%seuser</emphasis> syntax.
+              </para>
+        </listitem>
+    </itemizedlist>
+
+    <para>
+      The recognized options are:
+    </para>
+
+    <variablelist>
+        <varlistentry>
+              <term><option>exclusive</option></term>
+              <listitem>
+                <para>
+                  Only single login session will be allowed for the user
+                  and the user's processes will be killed on logout.
+                </para>
+              </listitem>
+        </varlistentry>
+        <varlistentry>
+              <term><option>ignore</option></term>
+              <listitem>
+                <para>
+                  The module will never return PAM_SUCCESS status for the user.
+                  It will return PAM_IGNORE if SELinux is in the enforcing mode,
+                  and PAM_AUTH_ERR otherwise. It is useful if you want to support
+                  passwordless guest users and other confined users with passwords
+                  simultaneously.
+                </para>
+              </listitem>
+        </varlistentry>
+    </variablelist>
+
+    <para>
+      The lines which start with # character are comments and are ignored.
+    </para>
+  </refsect1>
+
+  <refsect1 id="sepermit.conf-examples">
+    <title>EXAMPLES</title>
+    <para>
+      These are some example lines which might be specified in
+      <filename>/etc/security/sepermit.conf</filename>.
+    </para>
+    <programlisting>
+%guest_u:exclusive
+%staff_u:ignore
+%user_u:ignore
+    </programlisting>
+  </refsect1>
+
+  <refsect1 id="sepermit.conf-see_also">
+    <title>SEE ALSO</title>
+    <para>
+      <citerefentry><refentrytitle>pam_sepermit</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>selinux</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+    </para>
+  </refsect1>
+
+  <refsect1 id="sepermit.conf-author">
+    <title>AUTHOR</title>
+    <para>
+      pam_sepermit and this manual page were written by Tomas Mraz &lt;tmraz@redhat.com&gt;
+    </para>
+  </refsect1>
+</refentry>
diff --git a/modules/pam_sepermit/tst-pam_sepermit b/modules/pam_sepermit/tst-pam_sepermit
new file mode 100755
index 0000000..6e6d236
--- /dev/null
+++ b/modules/pam_sepermit/tst-pam_sepermit
@@ -0,0 +1,2 @@
+#!/bin/sh
+../../tests/tst-dlopen .libs/pam_sepermit.so