diff options
Diffstat (limited to '')
| -rw-r--r-- | src/modules/ladspa.h | 602 |
1 files changed, 602 insertions, 0 deletions
diff --git a/src/modules/ladspa.h b/src/modules/ladspa.h new file mode 100644 index 0000000..a5fd464 --- /dev/null +++ b/src/modules/ladspa.h @@ -0,0 +1,602 @@ +/* ladspa.h + + Linux Audio Developer's Simple Plugin API Version 1.1[LGPL]. + Copyright (C) 2000-2002 Richard W.E. Furse, Paul Barton-Davis, + Stefan Westerfeld. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + as published by the Free Software Foundation; either version 2.1 of + the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef LADSPA_INCLUDED +#define LADSPA_INCLUDED + +#define LADSPA_VERSION "1.1" +#define LADSPA_VERSION_MAJOR 1 +#define LADSPA_VERSION_MINOR 1 + +#ifdef __cplusplus +extern "C" { +#endif + +/*****************************************************************************/ + +/* Overview: + + There is a large number of synthesis packages in use or development + on the Linux platform at this time. This API (`The Linux Audio + Developer's Simple Plugin API') attempts to give programmers the + ability to write simple `plugin' audio processors in C/C++ and link + them dynamically (`plug') into a range of these packages (`hosts'). + It should be possible for any host and any plugin to communicate + completely through this interface. + + This API is deliberately short and simple. To achieve compatibility + with a range of promising Linux sound synthesis packages it + attempts to find the `greatest common divisor' in their logical + behaviour. Having said this, certain limiting decisions are + implicit, notably the use of a fixed type (LADSPA_Data) for all + data transfer and absence of a parameterised `initialisation' + phase. See below for the LADSPA_Data typedef. + + Plugins are expected to distinguish between control and audio + data. Plugins have `ports' that are inputs or outputs for audio or + control data and each plugin is `run' for a `block' corresponding + to a short time interval measured in samples. Audio data is + communicated using arrays of LADSPA_Data, allowing a block of audio + to be processed by the plugin in a single pass. Control data is + communicated using single LADSPA_Data values. Control data has a + single value at the start of a call to the `run()' or `run_adding()' + function, and may be considered to remain this value for its + duration. The plugin may assume that all its input and output ports + have been connected to the relevant data location (see the + `connect_port()' function below) before it is asked to run. + + Plugins will reside in shared object files suitable for dynamic + linking by dlopen() and family. The file will provide a number of + `plugin types' that can be used to instantiate actual plugins + (sometimes known as `plugin instances') that can be connected + together to perform tasks. + + This API contains very limited error-handling. */ + +/*****************************************************************************/ + +/* Fundamental data type passed in and out of plugin. This data type + is used to communicate audio samples and control values. It is + assumed that the plugin will work sensibly given any numeric input + value although it may have a preferred range (see hints below). + + For audio it is generally assumed that 1.0f is the `0dB' reference + amplitude and is a `normal' signal level. */ + +typedef float LADSPA_Data; + +/*****************************************************************************/ + +/* Special Plugin Properties: + + Optional features of the plugin type are encapsulated in the + LADSPA_Properties type. This is assembled by ORing individual + properties together. */ + +typedef int LADSPA_Properties; + +/* Property LADSPA_PROPERTY_REALTIME indicates that the plugin has a + real-time dependency (e.g. listens to a MIDI device) and so its + output must not be cached or subject to significant latency. */ +#define LADSPA_PROPERTY_REALTIME 0x1 + +/* Property LADSPA_PROPERTY_INPLACE_BROKEN indicates that the plugin + may cease to work correctly if the host elects to use the same data + location for both input and output (see connect_port()). This + should be avoided as enabling this flag makes it impossible for + hosts to use the plugin to process audio `in-place.' */ +#define LADSPA_PROPERTY_INPLACE_BROKEN 0x2 + +/* Property LADSPA_PROPERTY_HARD_RT_CAPABLE indicates that the plugin + is capable of running not only in a conventional host but also in a + `hard real-time' environment. To qualify for this the plugin must + satisfy all of the following: + + (1) The plugin must not use malloc(), free() or other heap memory + management within its run() or run_adding() functions. All new + memory used in run() must be managed via the stack. These + restrictions only apply to the run() function. + + (2) The plugin will not attempt to make use of any library + functions with the exceptions of functions in the ANSI standard C + and C maths libraries, which the host is expected to provide. + + (3) The plugin will not access files, devices, pipes, sockets, IPC + or any other mechanism that might result in process or thread + blocking. + + (4) The plugin will take an amount of time to execute a run() or + run_adding() call approximately of form (A+B*SampleCount) where A + and B depend on the machine and host in use. This amount of time + may not depend on input signals or plugin state. The host is left + the responsibility to perform timings to estimate upper bounds for + A and B. */ +#define LADSPA_PROPERTY_HARD_RT_CAPABLE 0x4 + +#define LADSPA_IS_REALTIME(x) ((x) & LADSPA_PROPERTY_REALTIME) +#define LADSPA_IS_INPLACE_BROKEN(x) ((x) & LADSPA_PROPERTY_INPLACE_BROKEN) +#define LADSPA_IS_HARD_RT_CAPABLE(x) ((x) & LADSPA_PROPERTY_HARD_RT_CAPABLE) + +/*****************************************************************************/ + +/* Plugin Ports: + + Plugins have `ports' that are inputs or outputs for audio or + data. Ports can communicate arrays of LADSPA_Data (for audio + inputs/outputs) or single LADSPA_Data values (for control + input/outputs). This information is encapsulated in the + LADSPA_PortDescriptor type which is assembled by ORing individual + properties together. + + Note that a port must be an input or an output port but not both + and that a port must be a control or audio port but not both. */ + +typedef int LADSPA_PortDescriptor; + +/* Property LADSPA_PORT_INPUT indicates that the port is an input. */ +#define LADSPA_PORT_INPUT 0x1 + +/* Property LADSPA_PORT_OUTPUT indicates that the port is an output. */ +#define LADSPA_PORT_OUTPUT 0x2 + +/* Property LADSPA_PORT_CONTROL indicates that the port is a control + port. */ +#define LADSPA_PORT_CONTROL 0x4 + +/* Property LADSPA_PORT_AUDIO indicates that the port is a audio + port. */ +#define LADSPA_PORT_AUDIO 0x8 + +#define LADSPA_IS_PORT_INPUT(x) ((x) & LADSPA_PORT_INPUT) +#define LADSPA_IS_PORT_OUTPUT(x) ((x) & LADSPA_PORT_OUTPUT) +#define LADSPA_IS_PORT_CONTROL(x) ((x) & LADSPA_PORT_CONTROL) +#define LADSPA_IS_PORT_AUDIO(x) ((x) & LADSPA_PORT_AUDIO) + +/*****************************************************************************/ + +/* Plugin Port Range Hints: + + The host may wish to provide a representation of data entering or + leaving a plugin (e.g. to generate a GUI automatically). To make + this more meaningful, the plugin should provide `hints' to the host + describing the usual values taken by the data. + + Note that these are only hints. The host may ignore them and the + plugin must not assume that data supplied to it is meaningful. If + the plugin receives invalid input data it is expected to continue + to run without failure and, where possible, produce a sensible + output (e.g. a high-pass filter given a negative cutoff frequency + might switch to an all-pass mode). + + Hints are meaningful for all input and output ports but hints for + input control ports are expected to be particularly useful. + + More hint information is encapsulated in the + LADSPA_PortRangeHintDescriptor type which is assembled by ORing + individual hint types together. Hints may require further + LowerBound and UpperBound information. + + All the hint information for a particular port is aggregated in the + LADSPA_PortRangeHint structure. */ + +typedef int LADSPA_PortRangeHintDescriptor; + +/* Hint LADSPA_HINT_BOUNDED_BELOW indicates that the LowerBound field + of the LADSPA_PortRangeHint should be considered meaningful. The + value in this field should be considered the (inclusive) lower + bound of the valid range. If LADSPA_HINT_SAMPLE_RATE is also + specified then the value of LowerBound should be multiplied by the + sample rate. */ +#define LADSPA_HINT_BOUNDED_BELOW 0x1 + +/* Hint LADSPA_HINT_BOUNDED_ABOVE indicates that the UpperBound field + of the LADSPA_PortRangeHint should be considered meaningful. The + value in this field should be considered the (inclusive) upper + bound of the valid range. If LADSPA_HINT_SAMPLE_RATE is also + specified then the value of UpperBound should be multiplied by the + sample rate. */ +#define LADSPA_HINT_BOUNDED_ABOVE 0x2 + +/* Hint LADSPA_HINT_TOGGLED indicates that the data item should be + considered a Boolean toggle. Data less than or equal to zero should + be considered `off' or `false,' and data above zero should be + considered `on' or `true.' LADSPA_HINT_TOGGLED may not be used in + conjunction with any other hint except LADSPA_HINT_DEFAULT_0 or + LADSPA_HINT_DEFAULT_1. */ +#define LADSPA_HINT_TOGGLED 0x4 + +/* Hint LADSPA_HINT_SAMPLE_RATE indicates that any bounds specified + should be interpreted as multiples of the sample rate. For + instance, a frequency range from 0Hz to the Nyquist frequency (half + the sample rate) could be requested by this hint in conjunction + with LowerBound = 0 and UpperBound = 0.5. Hosts that support bounds + at all must support this hint to retain meaning. */ +#define LADSPA_HINT_SAMPLE_RATE 0x8 + +/* Hint LADSPA_HINT_LOGARITHMIC indicates that it is likely that the + user will find it more intuitive to view values using a logarithmic + scale. This is particularly useful for frequencies and gains. */ +#define LADSPA_HINT_LOGARITHMIC 0x10 + +/* Hint LADSPA_HINT_INTEGER indicates that a user interface would + probably wish to provide a stepped control taking only integer + values. Any bounds set should be slightly wider than the actual + integer range required to avoid floating point rounding errors. For + instance, the integer set {0,1,2,3} might be described as [-0.1, + 3.1]. */ +#define LADSPA_HINT_INTEGER 0x20 + +/* The various LADSPA_HINT_HAS_DEFAULT_* hints indicate a `normal' + value for the port that is sensible as a default. For instance, + this value is suitable for use as an initial value in a user + interface or as a value the host might assign to a control port + when the user has not provided one. Defaults are encoded using a + mask so only one default may be specified for a port. Some of the + hints make use of lower and upper bounds, in which case the + relevant bound or bounds must be available and + LADSPA_HINT_SAMPLE_RATE must be applied as usual. The resulting + default must be rounded if LADSPA_HINT_INTEGER is present. Default + values were introduced in LADSPA v1.1. */ +#define LADSPA_HINT_DEFAULT_MASK 0x3C0 + +/* This default values indicates that no default is provided. */ +#define LADSPA_HINT_DEFAULT_NONE 0x0 + +/* This default hint indicates that the suggested lower bound for the + port should be used. */ +#define LADSPA_HINT_DEFAULT_MINIMUM 0x40 + +/* This default hint indicates that a low value between the suggested + lower and upper bounds should be chosen. For ports with + LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.75 + + log(upper) * 0.25). Otherwise, this should be (lower * 0.75 + upper + * 0.25). */ +#define LADSPA_HINT_DEFAULT_LOW 0x80 + +/* This default hint indicates that a middle value between the + suggested lower and upper bounds should be chosen. For ports with + LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.5 + + log(upper) * 0.5). Otherwise, this should be (lower * 0.5 + upper * + 0.5). */ +#define LADSPA_HINT_DEFAULT_MIDDLE 0xC0 + +/* This default hint indicates that a high value between the suggested + lower and upper bounds should be chosen. For ports with + LADSPA_HINT_LOGARITHMIC, this should be exp(log(lower) * 0.25 + + log(upper) * 0.75). Otherwise, this should be (lower * 0.25 + upper + * 0.75). */ +#define LADSPA_HINT_DEFAULT_HIGH 0x100 + +/* This default hint indicates that the suggested upper bound for the + port should be used. */ +#define LADSPA_HINT_DEFAULT_MAXIMUM 0x140 + +/* This default hint indicates that the number 0 should be used. Note + that this default may be used in conjunction with + LADSPA_HINT_TOGGLED. */ +#define LADSPA_HINT_DEFAULT_0 0x200 + +/* This default hint indicates that the number 1 should be used. Note + that this default may be used in conjunction with + LADSPA_HINT_TOGGLED. */ +#define LADSPA_HINT_DEFAULT_1 0x240 + +/* This default hint indicates that the number 100 should be used. */ +#define LADSPA_HINT_DEFAULT_100 0x280 + +/* This default hint indicates that the Hz frequency of `concert A' + should be used. This will be 440 unless the host uses an unusual + tuning convention, in which case it may be within a few Hz. */ +#define LADSPA_HINT_DEFAULT_440 0x2C0 + +#define LADSPA_IS_HINT_BOUNDED_BELOW(x) ((x) & LADSPA_HINT_BOUNDED_BELOW) +#define LADSPA_IS_HINT_BOUNDED_ABOVE(x) ((x) & LADSPA_HINT_BOUNDED_ABOVE) +#define LADSPA_IS_HINT_TOGGLED(x) ((x) & LADSPA_HINT_TOGGLED) +#define LADSPA_IS_HINT_SAMPLE_RATE(x) ((x) & LADSPA_HINT_SAMPLE_RATE) +#define LADSPA_IS_HINT_LOGARITHMIC(x) ((x) & LADSPA_HINT_LOGARITHMIC) +#define LADSPA_IS_HINT_INTEGER(x) ((x) & LADSPA_HINT_INTEGER) + +#define LADSPA_IS_HINT_HAS_DEFAULT(x) ((x) & LADSPA_HINT_DEFAULT_MASK) +#define LADSPA_IS_HINT_DEFAULT_MINIMUM(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_MINIMUM) +#define LADSPA_IS_HINT_DEFAULT_LOW(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_LOW) +#define LADSPA_IS_HINT_DEFAULT_MIDDLE(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_MIDDLE) +#define LADSPA_IS_HINT_DEFAULT_HIGH(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_HIGH) +#define LADSPA_IS_HINT_DEFAULT_MAXIMUM(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_MAXIMUM) +#define LADSPA_IS_HINT_DEFAULT_0(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_0) +#define LADSPA_IS_HINT_DEFAULT_1(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_1) +#define LADSPA_IS_HINT_DEFAULT_100(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_100) +#define LADSPA_IS_HINT_DEFAULT_440(x) (((x) & LADSPA_HINT_DEFAULT_MASK) \ + == LADSPA_HINT_DEFAULT_440) + +typedef struct _LADSPA_PortRangeHint { + + /* Hints about the port. */ + LADSPA_PortRangeHintDescriptor HintDescriptor; + + /* Meaningful when hint LADSPA_HINT_BOUNDED_BELOW is active. When + LADSPA_HINT_SAMPLE_RATE is also active then this value should be + multiplied by the relevant sample rate. */ + LADSPA_Data LowerBound; + + /* Meaningful when hint LADSPA_HINT_BOUNDED_ABOVE is active. When + LADSPA_HINT_SAMPLE_RATE is also active then this value should be + multiplied by the relevant sample rate. */ + LADSPA_Data UpperBound; + +} LADSPA_PortRangeHint; + +/*****************************************************************************/ + +/* Plugin Handles: + + This plugin handle indicates a particular instance of the plugin + concerned. It is valid to compare this to NULL (0 for C++) but + otherwise the host should not attempt to interpret it. The plugin + may use it to reference internal instance data. */ + +typedef void * LADSPA_Handle; + +/*****************************************************************************/ + +/* Descriptor for a Type of Plugin: + + This structure is used to describe a plugin type. It provides a + number of functions to examine the type, instantiate it, link it to + buffers and workspaces and to run it. */ + +typedef struct _LADSPA_Descriptor { + + /* This numeric identifier indicates the plugin type + uniquely. Plugin programmers may reserve ranges of IDs from a + central body to avoid clashes. Hosts may assume that IDs are + below 0x1000000. */ + unsigned long UniqueID; + + /* This identifier can be used as a unique, case-sensitive + identifier for the plugin type within the plugin file. Plugin + types should be identified by file and label rather than by index + or plugin name, which may be changed in new plugin + versions. Labels must not contain white-space characters. */ + const char * Label; + + /* This indicates a number of properties of the plugin. */ + LADSPA_Properties Properties; + + /* This member points to the null-terminated name of the plugin + (e.g. "Sine Oscillator"). */ + const char * Name; + + /* This member points to the null-terminated string indicating the + maker of the plugin. This can be an empty string but not NULL. */ + const char * Maker; + + /* This member points to the null-terminated string indicating any + copyright applying to the plugin. If no Copyright applies the + string "None" should be used. */ + const char * Copyright; + + /* This indicates the number of ports (input AND output) present on + the plugin. */ + unsigned long PortCount; + + /* This member indicates an array of port descriptors. Valid indices + vary from 0 to PortCount-1. */ + const LADSPA_PortDescriptor * PortDescriptors; + + /* This member indicates an array of null-terminated strings + describing ports (e.g. "Frequency (Hz)"). Valid indices vary from + 0 to PortCount-1. */ + const char * const * PortNames; + + /* This member indicates an array of range hints for each port (see + above). Valid indices vary from 0 to PortCount-1. */ + const LADSPA_PortRangeHint * PortRangeHints; + + /* This may be used by the plugin developer to pass any custom + implementation data into an instantiate call. It must not be used + or interpreted by the host. It is expected that most plugin + writers will not use this facility as LADSPA_Handle should be + used to hold instance data. */ + void * ImplementationData; + + /* This member is a function pointer that instantiates a plugin. A + handle is returned indicating the new plugin instance. The + instantiation function accepts a sample rate as a parameter. The + plugin descriptor from which this instantiate function was found + must also be passed. This function must return NULL if + instantiation fails. + + Note that instance initialisation should generally occur in + activate() rather than here. */ + LADSPA_Handle (*instantiate)(const struct _LADSPA_Descriptor * Descriptor, + unsigned long SampleRate); + + /* This member is a function pointer that connects a port on an + instantiated plugin to a memory location at which a block of data + for the port will be read/written. The data location is expected + to be an array of LADSPA_Data for audio ports or a single + LADSPA_Data value for control ports. Memory issues will be + managed by the host. The plugin must read/write the data at these + locations every time run() or run_adding() is called and the data + present at the time of this connection call should not be + considered meaningful. + + connect_port() may be called more than once for a plugin instance + to allow the host to change the buffers that the plugin is + reading or writing. These calls may be made before or after + activate() or deactivate() calls. + + connect_port() must be called at least once for each port before + run() or run_adding() is called. When working with blocks of + LADSPA_Data the plugin should pay careful attention to the block + size passed to the run function as the block allocated may only + just be large enough to contain the block of samples. + + Plugin writers should be aware that the host may elect to use the + same buffer for more than one port and even use the same buffer + for both input and output (see LADSPA_PROPERTY_INPLACE_BROKEN). + However, overlapped buffers or use of a single buffer for both + audio and control data may result in unexpected behaviour. */ + void (*connect_port)(LADSPA_Handle Instance, + unsigned long Port, + LADSPA_Data * DataLocation); + + /* This member is a function pointer that initialises a plugin + instance and activates it for use. This is separated from + instantiate() to aid real-time support and so that hosts can + reinitialise a plugin instance by calling deactivate() and then + activate(). In this case the plugin instance must reset all state + information dependent on the history of the plugin instance + except for any data locations provided by connect_port() and any + gain set by set_run_adding_gain(). If there is nothing for + activate() to do then the plugin writer may provide a NULL rather + than an empty function. + + When present, hosts must call this function once before run() (or + run_adding()) is called for the first time. This call should be + made as close to the run() call as possible and indicates to + real-time plugins that they are now live. Plugins should not rely + on a prompt call to run() after activate(). activate() may not be + called again unless deactivate() is called first. Note that + connect_port() may be called before or after a call to + activate(). */ + void (*activate)(LADSPA_Handle Instance); + + /* This method is a function pointer that runs an instance of a + plugin for a block. Two parameters are required: the first is a + handle to the particular instance to be run and the second + indicates the block size (in samples) for which the plugin + instance may run. + + Note that if an activate() function exists then it must be called + before run() or run_adding(). If deactivate() is called for a + plugin instance then the plugin instance may not be reused until + activate() has been called again. + + If the plugin has the property LADSPA_PROPERTY_HARD_RT_CAPABLE + then there are various things that the plugin should not do + within the run() or run_adding() functions (see above). */ + void (*run)(LADSPA_Handle Instance, + unsigned long SampleCount); + + /* This method is a function pointer that runs an instance of a + plugin for a block. This has identical behaviour to run() except + in the way data is output from the plugin. When run() is used, + values are written directly to the memory areas associated with + the output ports. However when run_adding() is called, values + must be added to the values already present in the memory + areas. Furthermore, output values written must be scaled by the + current gain set by set_run_adding_gain() (see below) before + addition. + + run_adding() is optional. When it is not provided by a plugin, + this function pointer must be set to NULL. When it is provided, + the function set_run_adding_gain() must be provided also. */ + void (*run_adding)(LADSPA_Handle Instance, + unsigned long SampleCount); + + /* This method is a function pointer that sets the output gain for + use when run_adding() is called (see above). If this function is + never called the gain is assumed to default to 1. Gain + information should be retained when activate() or deactivate() + are called. + + This function should be provided by the plugin if and only if the + run_adding() function is provided. When it is absent this + function pointer must be set to NULL. */ + void (*set_run_adding_gain)(LADSPA_Handle Instance, + LADSPA_Data Gain); + + /* This is the counterpart to activate() (see above). If there is + nothing for deactivate() to do then the plugin writer may provide + a NULL rather than an empty function. + + Hosts must deactivate all activated units after they have been + run() (or run_adding()) for the last time. This call should be + made as close to the last run() call as possible and indicates to + real-time plugins that they are no longer live. Plugins should + not rely on prompt deactivation. Note that connect_port() may be + called before or after a call to deactivate(). + + Deactivation is not similar to pausing as the plugin instance + will be reinitialised when activate() is called to reuse it. */ + void (*deactivate)(LADSPA_Handle Instance); + + /* Once an instance of a plugin has been finished with it can be + deleted using the following function. The instance handle passed + ceases to be valid after this call. + + If activate() was called for a plugin instance then a + corresponding call to deactivate() must be made before cleanup() + is called. */ + void (*cleanup)(LADSPA_Handle Instance); + +} LADSPA_Descriptor; + +/**********************************************************************/ + +/* Accessing a Plugin: */ + +/* The exact mechanism by which plugins are loaded is host-dependent, + however all most hosts will need to know is the name of shared + object file containing the plugin types. To allow multiple hosts to + share plugin types, hosts may wish to check for environment + variable LADSPA_PATH. If present, this should contain a + colon-separated path indicating directories that should be searched + (in order) when loading plugin types. + + A plugin programmer must include a function called + "ladspa_descriptor" with the following function prototype within + the shared object file. This function will have C-style linkage (if + you are using C++ this is taken care of by the `extern "C"' clause + at the top of the file). + + A host will find the plugin shared object file by one means or + another, find the ladspa_descriptor() function, call it, and + proceed from there. + + Plugin types are accessed by index (not ID) using values from 0 + upwards. Out of range indexes must result in this function + returning NULL, so the plugin count can be determined by checking + for the least index that results in NULL being returned. */ + +const LADSPA_Descriptor * ladspa_descriptor(unsigned long Index); + +/* Datatype corresponding to the ladspa_descriptor() function. */ +typedef const LADSPA_Descriptor * +(*LADSPA_Descriptor_Function)(unsigned long Index); + +/**********************************************************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* LADSPA_INCLUDED */ + +/* EOF */ |