Source: pulseaudio Section: sound Priority: optional Maintainer: Progress Linux Maintainers XSBC-Uploaders: Daniel Baumann XSBC-Original-Maintainer: Pulseaudio maintenance team XSBC-Original-Uploaders: Sjoerd Simons , Felipe Sateler , Sebastien Bacher Build-Depends: debhelper-compat (= 12), check , dh-exec, dpkg-dev (>= 1.17.14), intltool, libasound2-dev [linux-any], libasyncns-dev, libavahi-client-dev, libbluetooth-dev [linux-any] , libsbc-dev [linux-any], libcap-dev [linux-any], libfftw3-dev, libglib2.0-dev, libgtk-3-dev, libice-dev, libjack-dev, liblircclient-dev, libltdl-dev, liborc-0.4-dev, libsndfile1-dev, libsoxr-dev (>= 0.1.1), libspeexdsp-dev (>= 1.2~rc1), libssl-dev, libsystemd-dev [linux-any], libtdb-dev [!hurd-any], libudev-dev [linux-any], libwebrtc-audio-processing-dev (>= 0.2) [linux-any], libwrap0-dev, libx11-xcb-dev, libxcb1-dev, libxtst-dev Standards-Version: 4.5.0 Rules-Requires-Root: no Vcs-Browser: https://salsa.debian.org/pulseaudio-team/pulseaudio Vcs-Git: https://salsa.debian.org/pulseaudio-team/pulseaudio.git Homepage: https://www.pulseaudio.org Package: pulseaudio Architecture: any Multi-Arch: foreign Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends}, adduser, lsb-base (>= 3.2-13), libasound2-plugins [linux-any], libpulse0 (= ${binary:Version}), pulseaudio-utils Recommends: rtkit, default-logind | logind, dbus-user-session Suggests: udev [linux-any], pavumeter, pavucontrol, paprefs Description: PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . These are some of PulseAudio's features: . * High quality software mixing of multiple audio streams with support for more than one sink/source. May be used to combine multiple sound cards into one (with sample rate adjustment). . * Wide range of supported client libraries. ESD, ALSA, oss, libao and GStreamer client applications are supported as-is. Native PulseAudio plug-ins are also available for xmms and mplayer. . * Good low latency behaviour and very accurate latency measurement for playback and recording. Ability to fully synchronize multiple playback streams. . * Network transparency, allowing an application to play back or record audio on a different machine than the one it is running on. . * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp lirc and avahi, just to name a few. . This package contains the daemon and basic module set. Package: pulseaudio-utils Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, libpulsedsp Suggests: avahi-daemon, pulseaudio Description: Command line tools for the PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . These tools provide command line access to various features of the PulseAudio sound server. Included tools are: . paplay - Playback a WAV file via a PulseAudio sink. pacat - Cat raw audio data to a PulseAudio sink. parec - Cat raw audio data from a PulseAudio source. pacmd - Connect to PulseAudio's built-in command line control interface. pactl - Send a control command to a PulseAudio server. padsp - /dev/dsp wrapper to transparently support OSS applications. pax11publish - Store/retrieve PulseAudio default server/sink/source settings in the X11 root window. Package: pulseaudio-module-zeroconf Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, avahi-daemon Description: Zeroconf module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This module enables PulseAudio to publish available sinks and sources via zeroconf (aka. Avahi, mdns). . The module is called module-zeroconf-publish. Package: pulseaudio-module-jack Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: jackd modules for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . These modules enables PulseAudio to connect to a jackd daemon. . The modules are called module-jack-sink, module-jack-source. Package: pulseaudio-module-lirc Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: lirc module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This module enables the volume of a PulseAudio sink to be controlled when buttons of an infrared remote control are pressed (through LIRC). . The module is called module-lirc. Package: pulseaudio-module-gsettings Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: GSettings module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This module enables PulseAudio to store additional configuration in GSettings. It supersedes the gconf module. . The module is called module-gsettings. Package: pulseaudio-module-raop Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, pulseaudio-module-zeroconf Description: RAOP module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This module enables PulseAudio to stream audio to an Apple Airport Express. Package: pulseaudio-module-bluetooth Build-Profiles: Architecture: linux-any Depends: ${shlibs:Depends}, ${misc:Depends}, bluez (>= 5.23) Description: Bluetooth module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This module enables PulseAudio to work with bluetooth devices, like headset or audio gateway. . The module is called module-bluetooth Package: pulseaudio-equalizer Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, python3, python3-pyqt5, python3-dbus.mainloop.pyqt5, python3-dbus Description: Equalizer sink module for PulseAudio sound server PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This package provides an equalizer sink and an interface to configure the equalizer, qpaeq. . The module is called module-equalizer-sink. Package: libpulse0 Section: libs Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: pulseaudio Description: PulseAudio client libraries PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. Package: libpulse-mainloop-glib0 Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends} Description: PulseAudio client libraries (glib support) PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. . This package adds support for glib2 client applications. Package: libpulse-dev Section: libdevel Architecture: any Multi-Arch: same Depends: ${misc:Depends}, libpulse0 (= ${binary:Version}), libpulse-mainloop-glib0 (= ${binary:Version}), libglib2.0-dev, Description: PulseAudio client development headers and libraries PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Headers and libraries for developing applications that access a PulseAudio sound server via PulseAudio's native interface. Package: libpulsedsp Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends} Description: PulseAudio OSS pre-load library PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . This package provides the pre-load library used to redirect applications using OSS through pulseaudio.