From 333f7ecfa3e040191c66b2b92f6c117ca2cbac1d Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 27 Apr 2024 14:50:00 +0200 Subject: Adding upstream version 1:4.8.1. Signed-off-by: Daniel Baumann --- etc/Makefile.am | 24 ++ etc/Makefile.in | 776 ++++++++++++++++++++++++++++++++++++++++++++++++++ etc/limits | 30 ++ etc/login.access | 54 ++++ etc/login.defs | 430 ++++++++++++++++++++++++++++ etc/pam.d/Makefile.am | 35 +++ etc/pam.d/Makefile.in | 550 +++++++++++++++++++++++++++++++++++ etc/pam.d/chage | 4 + etc/pam.d/chfn | 4 + etc/pam.d/chgpasswd | 4 + etc/pam.d/chpasswd | 4 + etc/pam.d/chsh | 4 + etc/pam.d/groupadd | 4 + etc/pam.d/groupdel | 4 + etc/pam.d/groupmems | 4 + etc/pam.d/groupmod | 4 + etc/pam.d/login | 11 + etc/pam.d/newusers | 4 + etc/pam.d/passwd | 4 + etc/pam.d/su | 13 + etc/pam.d/useradd | 4 + etc/pam.d/userdel | 4 + etc/pam.d/usermod | 4 + etc/useradd | 8 + 24 files changed, 1987 insertions(+) create mode 100644 etc/Makefile.am create mode 100644 etc/Makefile.in create mode 100644 etc/limits create mode 100644 etc/login.access create mode 100644 etc/login.defs create mode 100644 etc/pam.d/Makefile.am create mode 100644 etc/pam.d/Makefile.in create mode 100644 etc/pam.d/chage create mode 100644 etc/pam.d/chfn create mode 100644 etc/pam.d/chgpasswd create mode 100644 etc/pam.d/chpasswd create mode 100644 etc/pam.d/chsh create mode 100644 etc/pam.d/groupadd create mode 100644 etc/pam.d/groupdel create mode 100644 etc/pam.d/groupmems create mode 100644 etc/pam.d/groupmod create mode 100644 etc/pam.d/login create mode 100644 etc/pam.d/newusers create mode 100644 etc/pam.d/passwd create mode 100644 etc/pam.d/su create mode 100644 etc/pam.d/useradd create mode 100644 etc/pam.d/userdel create mode 100644 etc/pam.d/usermod create mode 100644 etc/useradd (limited to 'etc') diff --git a/etc/Makefile.am b/etc/Makefile.am new file mode 100644 index 0000000..cc31c60 --- /dev/null +++ b/etc/Makefile.am @@ -0,0 +1,24 @@ +# This is a dummy Makefile.am to get automake work flawlessly, +# and also cooperate to make a distribution for `make dist' + +sysconf_DATA = login.defs + +defaultdir = $(sysconfdir)/default +default_DATA = \ + useradd + +nonpam_files = \ + limits \ + login.access + +if !USE_PAM +nonpamdir = $(sysconfdir) +nonpam_DATA = $(nonpam_files) +endif + +EXTRA_DIST = \ + $(nonpam_files) \ + $(sysconf_DATA) \ + $(default_DATA) + +SUBDIRS = pam.d diff --git a/etc/Makefile.in b/etc/Makefile.in new file mode 100644 index 0000000..58ec0cc --- /dev/null +++ b/etc/Makefile.in @@ -0,0 +1,776 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This is a dummy Makefile.am to get automake work flawlessly, +# and also cooperate to make a distribution for `make dist' + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = etc +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" \ + "$(DESTDIR)$(sysconfdir)" +DATA = $(default_DATA) $(nonpam_DATA) $(sysconf_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +ECONF_CPPFLAGS = @ECONF_CPPFLAGS@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBACL = @LIBACL@ +LIBATTR = @LIBATTR@ +LIBAUDIT = @LIBAUDIT@ +LIBCRACK = @LIBCRACK@ +LIBCRYPT = @LIBCRYPT@ +LIBECONF = @LIBECONF@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBMD = @LIBMD@ +LIBOBJS = @LIBOBJS@ +LIBPAM = @LIBPAM@ +LIBS = @LIBS@ +LIBSELINUX = @LIBSELINUX@ +LIBSEMANAGE = @LIBSEMANAGE@ +LIBSKEY = @LIBSKEY@ +LIBTCB = @LIBTCB@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VENDORDIR = @VENDORDIR@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +XMLCATALOG = @XMLCATALOG@ +XML_CATALOG_FILE = @XML_CATALOG_FILE@ +XSLTPROC = @XSLTPROC@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +capcmd = @capcmd@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +sysconf_DATA = login.defs +defaultdir = $(sysconfdir)/default +default_DATA = \ + useradd + +nonpam_files = \ + limits \ + login.access + +@USE_PAM_FALSE@nonpamdir = $(sysconfdir) +@USE_PAM_FALSE@nonpam_DATA = $(nonpam_files) +EXTRA_DIST = \ + $(nonpam_files) \ + $(sysconf_DATA) \ + $(default_DATA) + +SUBDIRS = pam.d +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign etc/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-defaultDATA: $(default_DATA) + @$(NORMAL_INSTALL) + @list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(defaultdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(defaultdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(defaultdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(defaultdir)" || exit $$?; \ + done + +uninstall-defaultDATA: + @$(NORMAL_UNINSTALL) + @list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(defaultdir)'; $(am__uninstall_files_from_dir) +install-nonpamDATA: $(nonpam_DATA) + @$(NORMAL_INSTALL) + @list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(nonpamdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(nonpamdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(nonpamdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(nonpamdir)" || exit $$?; \ + done + +uninstall-nonpamDATA: + @$(NORMAL_UNINSTALL) + @list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(nonpamdir)'; $(am__uninstall_files_from_dir) +install-sysconfDATA: $(sysconf_DATA) + @$(NORMAL_INSTALL) + @list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \ + done + +uninstall-sysconfDATA: + @$(NORMAL_UNINSTALL) + @list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" "$(DESTDIR)$(sysconfdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-defaultDATA install-nonpamDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: install-sysconfDATA + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-defaultDATA uninstall-nonpamDATA \ + uninstall-sysconfDATA + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic clean-libtool cscopelist-am ctags \ + ctags-am distclean distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-defaultDATA install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-nonpamDATA install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + install-sysconfDATA installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am \ + uninstall-defaultDATA uninstall-nonpamDATA \ + uninstall-sysconfDATA + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/etc/limits b/etc/limits new file mode 100644 index 0000000..d39f2d5 --- /dev/null +++ b/etc/limits @@ -0,0 +1,30 @@ +# /etc/limits contains user resource limits. +# See limits(5). +# +# Format: +# +# +# default entry is '*' for username +# +# Valid flags are: +# A: max address space (KB) +# C: max core file size (KB) +# D: max data size (KB) +# F: maximum filesize (KB) +# M: max locked-in-memory address space (KB) [only for root on Linux 2.0.x] +# N: max number of open files +# R: max resident set size (KB) [no effect on Linux 2.0.x] +# S: max stack size (KB) +# T: max CPU time (MIN) +# U: max number of processes +# L: max number of logins for this user +# I: max nice value (0..39 translates to 20..-19) +# O: max real time priority (0..MAX_RT_PRIO) +# +# Examples: +# the default entry +#* L2 D6144 R2048 S2048 U32 N32 F16384 T5 C0 I20 O0 +# another way of suspending a user login +#guest L0 +# this account has no limits +#sysadm - diff --git a/etc/login.access b/etc/login.access new file mode 100644 index 0000000..3ed3688 --- /dev/null +++ b/etc/login.access @@ -0,0 +1,54 @@ +# $Id$ +# +# Login access control table. +# +# When someone logs in, the table is scanned for the first entry that +# matches the (user, host) combination, or, in case of non-networked +# logins, the first entry that matches the (user, tty) combination. The +# permissions field of that table entry determines whether the login will +# be accepted or refused. +# +# Format of the login access control table is three fields separated by a +# ":" character: +# +# permission : users : origins +# +# The first field should be a "+" (access granted) or "-" (access denied) +# character. +# +# The second field should be a list of one or more login names, group +# names, or ALL (always matches). A pattern of the form user@host is +# matched when the login name matches the "user" part, and when the +# "host" part matches the local machine name. +# +# The third field should be a list of one or more tty names (for +# non-networked logins), host names, domain names (begin with "."), host +# addresses, internet network numbers (end with "."), ALL (always +# matches) or LOCAL (matches any string that does not contain a "." +# character). +# +# If you run NIS you can use @netgroupname in host or user patterns; this +# even works for @usergroup@@hostgroup patterns. Weird. +# +# The EXCEPT operator makes it possible to write very compact rules. +# +# The group file is searched only when a name does not match that of the +# logged-in user. Only groups are matched in which users are explicitly +# listed: the program does not look at a user's primary group id value. +# +############################################################################## +# +# Disallow console logins to all but a few accounts. +# +#-:ALL EXCEPT wheel shutdown sync:console +# +# Disallow non-local logins to privileged accounts (group wheel). +# +#-:wheel:ALL EXCEPT LOCAL .win.tue.nl +# +# Some accounts are not allowed to login from anywhere: +# +#-:wsbscaro wsbsecr wsbspac wsbsym wscosor wstaiwde:ALL +# +# All other accounts are allowed to login from anywhere. +# diff --git a/etc/login.defs b/etc/login.defs new file mode 100644 index 0000000..a2f8cd5 --- /dev/null +++ b/etc/login.defs @@ -0,0 +1,430 @@ +# +# /etc/login.defs - Configuration control definitions for the shadow package. +# +# $Id$ +# + +# +# Delay in seconds before being allowed another attempt after a login failure +# Note: When PAM is used, some modules may enforce a minimum delay (e.g. +# pam_unix(8) enforces a 2s delay) +# +FAIL_DELAY 3 + +# +# Enable logging and display of /var/log/faillog login(1) failure info. +# +FAILLOG_ENAB yes + +# +# Enable display of unknown usernames when login(1) failures are recorded. +# +LOG_UNKFAIL_ENAB no + +# +# Enable logging of successful logins +# +LOG_OK_LOGINS no + +# +# Enable logging and display of /var/log/lastlog login(1) time info. +# +LASTLOG_ENAB yes + +# +# Limit the highest user ID number for which the lastlog entries should +# be updated. +# +# No LASTLOG_UID_MAX means that there is no user ID limit for writing +# lastlog entries. +# +#LASTLOG_UID_MAX + +# +# Enable checking and display of mailbox status upon login. +# +# Disable if the shell startup files already check for mail +# ("mailx -e" or equivalent). +# +MAIL_CHECK_ENAB yes + +# +# Enable additional checks upon password changes. +# +OBSCURE_CHECKS_ENAB yes + +# +# Enable checking of time restrictions specified in /etc/porttime. +# +PORTTIME_CHECKS_ENAB yes + +# +# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field. +# +QUOTAS_ENAB yes + +# +# Enable "syslog" logging of su(1) activity - in addition to sulog file logging. +# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1). +# +SYSLOG_SU_ENAB yes +SYSLOG_SG_ENAB yes + +# +# If defined, either full pathname of a file containing device names or +# a ":" delimited list of device names. Root logins will be allowed only +# from these devices. +# +CONSOLE /etc/securetty +#CONSOLE console:tty01:tty02:tty03:tty04 + +# +# If defined, all su(1) activity is logged to this file. +# +#SULOG_FILE /var/log/sulog + +# +# If defined, ":" delimited list of "message of the day" files to +# be displayed upon login. +# +MOTD_FILE /etc/motd +#MOTD_FILE /etc/motd:/usr/lib/news/news-motd + +# +# If defined, this file will be output before each login(1) prompt. +# +#ISSUE_FILE /etc/issue + +# +# If defined, file which maps tty line to TERM environment parameter. +# Each line of the file is in a format similar to "vt100 tty01". +# +#TTYTYPE_FILE /etc/ttytype + +# +# If defined, login(1) failures will be logged here in a utmp format. +# last(1), when invoked as lastb(1), will read /var/log/btmp, so... +# +FTMP_FILE /var/log/btmp + +# +# If defined, name of file whose presence will inhibit non-root +# logins. The content of this file should be a message indicating +# why logins are inhibited. +# +NOLOGINS_FILE /etc/nologin + +# +# If defined, the command name to display when running "su -". For +# example, if this is defined as "su" then ps(1) will display the +# command as "-su". If not defined, then ps(1) will display the +# name of the shell actually being run, e.g. something like "-sh". +# +SU_NAME su + +# +# *REQUIRED* +# Directory where mailboxes reside, _or_ name of file, relative to the +# home directory. If you _do_ define both, MAIL_DIR takes precedence. +# +MAIL_DIR /var/spool/mail +#MAIL_FILE .mail + +# +# If defined, file which inhibits all the usual chatter during the login +# sequence. If a full pathname, then hushed mode will be enabled if the +# user's name or shell are found in the file. If not a full pathname, then +# hushed mode will be enabled if the file exists in the user's home directory. +# +HUSHLOGIN_FILE .hushlogin +#HUSHLOGIN_FILE /etc/hushlogins + +# +# If defined, either a TZ environment parameter spec or the +# fully-rooted pathname of a file containing such a spec. +# +#ENV_TZ TZ=CST6CDT +#ENV_TZ /etc/tzname + +# +# If defined, an HZ environment parameter spec. +# +# for Linux/x86 +ENV_HZ HZ=100 +# For Linux/Alpha... +#ENV_HZ HZ=1024 + +# +# *REQUIRED* The default PATH settings, for superuser and normal users. +# +# (they are minimal, add the rest in the shell startup files) +ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin +ENV_PATH PATH=/bin:/usr/bin + +# +# Terminal permissions +# +# TTYGROUP Login tty will be assigned this group ownership. +# TTYPERM Login tty will be set to this permission. +# +# If you have a write(1) program which is "setgid" to a special group +# which owns the terminals, define TTYGROUP as the number of such group +# and TTYPERM as 0620. Otherwise leave TTYGROUP commented out and +# set TTYPERM to either 622 or 600. +# +TTYGROUP tty +TTYPERM 0600 + +# +# Login configuration initializations: +# +# ERASECHAR Terminal ERASE character ('\010' = backspace). +# KILLCHAR Terminal KILL character ('\025' = CTRL/U). +# ULIMIT Default "ulimit" value. +# +# The ERASECHAR and KILLCHAR are used only on System V machines. +# The ULIMIT is used only if the system supports it. +# (now it works with setrlimit too; ulimit is in 512-byte units) +# +# Prefix these values with "0" to get octal, "0x" to get hexadecimal. +# +ERASECHAR 0177 +KILLCHAR 025 +#ULIMIT 2097152 + +# Default initial "umask" value used by login(1) on non-PAM enabled systems. +# Default "umask" value for pam_umask(8) on PAM enabled systems. +# UMASK is also used by useradd(8) and newusers(8) to set the mode for new +# home directories if HOME_MODE is not set. +# 022 is the default value, but 027, or even 077, could be considered +# for increased privacy. There is no One True Answer here: each sysadmin +# must make up their mind. +UMASK 022 + +# HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new +# home directories. +# If HOME_MODE is not set, the value of UMASK is used to create the mode. +#HOME_MODE 0700 + +# +# Password aging controls: +# +# PASS_MAX_DAYS Maximum number of days a password may be used. +# PASS_MIN_DAYS Minimum number of days allowed between password changes. +# PASS_MIN_LEN Minimum acceptable password length. +# PASS_WARN_AGE Number of days warning given before a password expires. +# +PASS_MAX_DAYS 99999 +PASS_MIN_DAYS 0 +PASS_MIN_LEN 5 +PASS_WARN_AGE 7 + +# +# If "yes", the user must be listed as a member of the first gid 0 group +# in /etc/group (called "root" on most Linux systems) to be able to "su" +# to uid 0 accounts. If the group doesn't exist or is empty, no one +# will be able to "su" to uid 0. +# +SU_WHEEL_ONLY no + +# +# If compiled with cracklib support, sets the path to the dictionaries +# +CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict + +# +# Min/max values for automatic uid selection in useradd(8) +# +UID_MIN 1000 +UID_MAX 60000 +# System accounts +SYS_UID_MIN 101 +SYS_UID_MAX 999 +# Extra per user uids +SUB_UID_MIN 100000 +SUB_UID_MAX 600100000 +SUB_UID_COUNT 65536 + +# +# Min/max values for automatic gid selection in groupadd(8) +# +GID_MIN 1000 +GID_MAX 60000 +# System accounts +SYS_GID_MIN 101 +SYS_GID_MAX 999 +# Extra per user group ids +SUB_GID_MIN 100000 +SUB_GID_MAX 600100000 +SUB_GID_COUNT 65536 + +# +# Max number of login(1) retries if password is bad +# +LOGIN_RETRIES 5 + +# +# Max time in seconds for login(1) +# +LOGIN_TIMEOUT 60 + +# +# Maximum number of attempts to change password if rejected (too easy) +# +PASS_CHANGE_TRIES 5 + +# +# Warn about weak passwords (but still allow them) if you are root. +# +PASS_ALWAYS_WARN yes + +# +# Number of significant characters in the password for crypt(). +# Default is 8, don't change unless your crypt() is better. +# Ignored if MD5_CRYPT_ENAB set to "yes". +# +#PASS_MAX_LEN 8 + +# +# Require password before chfn(1)/chsh(1) can make any changes. +# +CHFN_AUTH yes + +# +# Which fields may be changed by regular users using chfn(1) - use +# any combination of letters "frwh" (full name, room number, work +# phone, home phone). If not defined, no changes are allowed. +# For backward compatibility, "yes" = "rwh" and "no" = "frwh". +# +CHFN_RESTRICT rwh + +# +# Password prompt (%s will be replaced by user name). +# +# XXX - it doesn't work correctly yet, for now leave it commented out +# to use the default which is just "Password: ". +#LOGIN_STRING "%s's Password: " + +# +# Only works if compiled with MD5_CRYPT defined: +# If set to "yes", new passwords will be encrypted using the MD5-based +# algorithm compatible with the one used by recent releases of FreeBSD. +# It supports passwords of unlimited length and longer salt strings. +# Set to "no" if you need to copy encrypted passwords to other systems +# which don't understand the new algorithm. Default is "no". +# +# Note: If you use PAM, it is recommended to use a value consistent with +# the PAM modules configuration. +# +# This variable is deprecated. You should use ENCRYPT_METHOD instead. +# +#MD5_CRYPT_ENAB no + +# +# Only works if compiled with ENCRYPTMETHOD_SELECT defined: +# If set to MD5, MD5-based algorithm will be used for encrypting password +# If set to SHA256, SHA256-based algorithm will be used for encrypting password +# If set to SHA512, SHA512-based algorithm will be used for encrypting password +# If set to BCRYPT, BCRYPT-based algorithm will be used for encrypting password +# If set to DES, DES-based algorithm will be used for encrypting password (default) +# Overrides the MD5_CRYPT_ENAB option +# +# Note: If you use PAM, it is recommended to use a value consistent with +# the PAM modules configuration. +# +#ENCRYPT_METHOD DES + +# +# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512. +# +# Define the number of SHA rounds. +# With a lot of rounds, it is more difficult to brute-force the password. +# However, more CPU resources will be needed to authenticate users if +# this value is increased. +# +# If not specified, the libc will choose the default number of rounds (5000). +# The values must be within the 1000-999999999 range. +# If only one of the MIN or MAX values is set, then this value will be used. +# If MIN > MAX, the highest value will be used. +# +#SHA_CRYPT_MIN_ROUNDS 5000 +#SHA_CRYPT_MAX_ROUNDS 5000 + +# +# Only works if ENCRYPT_METHOD is set to BCRYPT. +# +# Define the number of BCRYPT rounds. +# With a lot of rounds, it is more difficult to brute-force the password. +# However, more CPU resources will be needed to authenticate users if +# this value is increased. +# +# If not specified, 13 rounds will be attempted. +# If only one of the MIN or MAX values is set, then this value will be used. +# If MIN > MAX, the highest value will be used. +# +#BCRYPT_MIN_ROUNDS 13 +#BCRYPT_MAX_ROUNDS 13 + +# +# List of groups to add to the user's supplementary group set +# when logging in from the console (as determined by the CONSOLE +# setting). Default is none. +# +# Use with caution - it is possible for users to gain permanent +# access to these groups, even when not logged in from the console. +# How to do it is left as an exercise for the reader... +# +#CONSOLE_GROUPS floppy:audio:cdrom + +# +# Should login be allowed if we can't cd to the home directory? +# Default is no. +# +DEFAULT_HOME yes + +# +# If this file exists and is readable, login environment will be +# read from it. Every line should be in the form name=value. +# +ENVIRON_FILE /etc/environment + +# +# If defined, this command is run when removing a user. +# It should remove any at/cron/print jobs etc. owned by +# the user to be removed (passed as the first argument). +# +#USERDEL_CMD /usr/sbin/userdel_local + +# +# Enable setting of the umask group bits to be the same as owner bits +# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is +# the same as gid, and username is the same as the primary group name. +# +# This also enables userdel(8) to remove user groups if no members exist. +# +USERGROUPS_ENAB yes + +# +# If set to a non-zero number, the shadow utilities will make sure that +# groups never have more than this number of users on one line. +# This permits to support split groups (groups split into multiple lines, +# with the same group ID, to avoid limitation of the line length in the +# group file). +# +# 0 is the default value and disables this feature. +# +#MAX_MEMBERS_PER_GROUP 0 + +# +# If useradd(8) should create home directories for users by default (non +# system users only). +# This option is overridden with the -M or -m flags on the useradd(8) +# command-line. +# +#CREATE_HOME yes + +# +# Force use shadow, even if shadow passwd & shadow group files are +# missing. +# +#FORCE_SHADOW yes diff --git a/etc/pam.d/Makefile.am b/etc/pam.d/Makefile.am new file mode 100644 index 0000000..38ff26a --- /dev/null +++ b/etc/pam.d/Makefile.am @@ -0,0 +1,35 @@ +# This is a dummy Makefile.am to get automake work flawlessly, +# and also cooperate to make a distribution for `make dist' + +pamd_files = \ + chfn \ + chsh \ + groupmems \ + login \ + passwd + +pamd_acct_tools_files = \ + chage \ + chgpasswd \ + chpasswd \ + groupadd \ + groupdel \ + groupmod \ + newusers \ + useradd \ + userdel \ + usermod + +if USE_PAM +pamddir = $(sysconfdir)/pam.d +pamd_DATA = $(pamd_files) +if ACCT_TOOLS_SETUID +pamd_DATA += $(pamd_acct_tools_files) +endif +endif + +if WITH_SU +pamd_files += su +endif + +EXTRA_DIST = $(pamd_files) $(pamd_acct_tools_files) diff --git a/etc/pam.d/Makefile.in b/etc/pam.d/Makefile.in new file mode 100644 index 0000000..fcb4e86 --- /dev/null +++ b/etc/pam.d/Makefile.in @@ -0,0 +1,550 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# This is a dummy Makefile.am to get automake work flawlessly, +# and also cooperate to make a distribution for `make dist' + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@ACCT_TOOLS_SETUID_TRUE@@USE_PAM_TRUE@am__append_1 = $(pamd_acct_tools_files) +@WITH_SU_TRUE@am__append_2 = su +subdir = etc/pam.d +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pamddir)" +DATA = $(pamd_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +ECONF_CPPFLAGS = @ECONF_CPPFLAGS@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBACL = @LIBACL@ +LIBATTR = @LIBATTR@ +LIBAUDIT = @LIBAUDIT@ +LIBCRACK = @LIBCRACK@ +LIBCRYPT = @LIBCRYPT@ +LIBECONF = @LIBECONF@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBMD = @LIBMD@ +LIBOBJS = @LIBOBJS@ +LIBPAM = @LIBPAM@ +LIBS = @LIBS@ +LIBSELINUX = @LIBSELINUX@ +LIBSEMANAGE = @LIBSEMANAGE@ +LIBSKEY = @LIBSKEY@ +LIBTCB = @LIBTCB@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VENDORDIR = @VENDORDIR@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +XMLCATALOG = @XMLCATALOG@ +XML_CATALOG_FILE = @XML_CATALOG_FILE@ +XSLTPROC = @XSLTPROC@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +capcmd = @capcmd@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +pamd_files = chfn chsh groupmems login passwd $(am__append_2) +pamd_acct_tools_files = \ + chage \ + chgpasswd \ + chpasswd \ + groupadd \ + groupdel \ + groupmod \ + newusers \ + useradd \ + userdel \ + usermod + +@USE_PAM_TRUE@pamddir = $(sysconfdir)/pam.d +@USE_PAM_TRUE@pamd_DATA = $(pamd_files) $(am__append_1) +EXTRA_DIST = $(pamd_files) $(pamd_acct_tools_files) +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/pam.d/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign etc/pam.d/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-pamdDATA: $(pamd_DATA) + @$(NORMAL_INSTALL) + @list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pamddir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pamddir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pamddir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pamddir)" || exit $$?; \ + done + +uninstall-pamdDATA: + @$(NORMAL_UNINSTALL) + @list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pamddir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(pamddir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-pamdDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-pamdDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pamdDATA install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags-am uninstall uninstall-am uninstall-pamdDATA + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/etc/pam.d/chage b/etc/pam.d/chage new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/chage @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/chfn b/etc/pam.d/chfn new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/chfn @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/chgpasswd b/etc/pam.d/chgpasswd new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/chgpasswd @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/chpasswd b/etc/pam.d/chpasswd new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/chpasswd @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/chsh b/etc/pam.d/chsh new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/chsh @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/groupadd b/etc/pam.d/groupadd new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/groupadd @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/groupdel b/etc/pam.d/groupdel new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/groupdel @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/groupmems b/etc/pam.d/groupmems new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/groupmems @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/groupmod b/etc/pam.d/groupmod new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/groupmod @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/login b/etc/pam.d/login new file mode 100644 index 0000000..5a64806 --- /dev/null +++ b/etc/pam.d/login @@ -0,0 +1,11 @@ +#%PAM-1.0 +auth required pam_securetty.so +auth include system-auth +account required pam_nologin.so +account include system-auth +password include system-auth +session required pam_selinux.so close +session include system-auth +session required pam_loginuid.so +session optional pam_console.so +session required pam_selinux.so open diff --git a/etc/pam.d/newusers b/etc/pam.d/newusers new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/newusers @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/passwd b/etc/pam.d/passwd new file mode 100644 index 0000000..731c0d3 --- /dev/null +++ b/etc/pam.d/passwd @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth include system-auth +account include system-auth +password include system-auth diff --git a/etc/pam.d/su b/etc/pam.d/su new file mode 100644 index 0000000..7ef7134 --- /dev/null +++ b/etc/pam.d/su @@ -0,0 +1,13 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +# Uncomment the following line to implicitly trust users in the "wheel" group. +#auth sufficient pam_wheel.so trust use_uid +# Uncomment the following line to require a user to be in the "wheel" group. +auth required pam_wheel.so use_uid +auth include system-auth +account include system-auth +password include system-auth +session required pam_selinux.so close +session include system-auth +session required pam_selinux.so open multiple +session optional pam_xauth.so diff --git a/etc/pam.d/useradd b/etc/pam.d/useradd new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/useradd @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/userdel b/etc/pam.d/userdel new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/userdel @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/pam.d/usermod b/etc/pam.d/usermod new file mode 100644 index 0000000..8f49f5c --- /dev/null +++ b/etc/pam.d/usermod @@ -0,0 +1,4 @@ +#%PAM-1.0 +auth sufficient pam_rootok.so +account required pam_permit.so +password include system-auth diff --git a/etc/useradd b/etc/useradd new file mode 100644 index 0000000..b77dd85 --- /dev/null +++ b/etc/useradd @@ -0,0 +1,8 @@ +# useradd defaults file +GROUP=1000 +HOME=/home +INACTIVE=-1 +EXPIRE= +SHELL=/bin/bash +SKEL=/etc/skel +CREATE_MAIL_SPOOL=yes -- cgit v1.2.3