#!/bin/sh # Copyright 2020 One Identity LLC. ALL RIGHTS RESERVED pp_revision="20200814" # Copyright 2018 One Identity LLC. ALL RIGHTS RESERVED. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of One Identity LLC. nor the names of its # contributors may be used to endorse or promote products derived from # this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED # TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Please see for more information pp_version="1.0.0.$pp_revision" pp_copyright="Copyright 2018, One Identity LLC. ALL RIGHTS RESERVED." pp_opt_debug=false pp_opt_destdir="$DESTDIR" pp_opt_install_script= pp_opt_list=false pp_opt_no_clean=false pp_opt_no_package=false pp_opt_only_front=false pp_opt_platform= pp_opt_probe=false pp_opt_strip=false pp_opt_save_unstripped=false pp_opt_vas_platforms=false pp_opt_wrkdir="`pwd`/pp.work.$$" pp_opt_verbose=false pp_opt_version=false pp_opt_input="-" pp_opt_init_vars="" pp_opt_eval= test -n "$PP_NO_CLEAN" && pp_opt_no_clean=true test -n "$PP_DEBUG" && pp_opt_debug=true test -n "$PP_VERBOSE" && pp_opt_verbose=true pp_main_cleanup () { pp_debug "main_cleanup" pp_remove_later_now if $pp_opt_no_clean || test x"$pp_platform" = x"unknown"; then : no cleanup else pp_backend_${pp_platform}_cleanup $pp_errors && pp_die "Errors during cleanup" if test -d "$pp_wrkdir"; then if $pp_opt_debug; then pp_debug "not removing $pp_wrkdir" else pp_verbose rm -rf "$pp_wrkdir" fi fi fi } pp_parseopts () { typeset a n _var _val while test $# -gt 0; do # convert -[dilpv] to --long-options case "$1" in --?*=?*) n=`echo "$1" | sed -ne 's/^--\([^=]*\)=.*/\1/p'` a=`echo "$1" | sed -ne 's/^--[^=]*=\(.*\)/\1/p'` shift set -- "--$n" "$a" "$@";; --?*) : ;; -d) shift; set -- "--debug" "$@";; -d*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--debug" "$@";; -i) shift; set -- "--install-script" "$@";; -i*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--install-script" "$a" "$@";; -l) shift; set -- "--list" "$@";; -l*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--list" "$@";; -p) shift; set -- "--platform" "$@";; -p*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--platform" "$a" "$@";; -v) shift; set -- "--verbose" "$@";; -v*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--verbose" "$@";; -\?) shift; set -- "--help" "$@";; -\?*) a=`echo "$1" | sed -ne 's/^-.//'` shift; set -- "--help" "$@";; esac case "$1" in --destdir|--eval|--install-script|--platform|--wrkdir) test $# -ge 2 || pp_error "missing argument to $1";; esac case "$1" in --) shift;break;; --debug) pp_opt_debug=true; shift;; --destdir) pp_opt_destdir="$2"; shift;shift;; --eval) pp_opt_eval="$2"; shift;shift;; # undoc --install-script) pp_opt_install_script="$2"; shift;shift;; --list) pp_opt_list=true; shift;; --no-clean) pp_opt_no_clean=true; shift;; --no-package) pp_opt_no_package=true; shift;; --only-front) pp_opt_only_front=true; shift;; --platform) pp_opt_platform="$2"; shift;shift;; --probe) pp_opt_probe=true; shift;; --strip) pp_opt_strip=true; shift;; --save-unstripped) pp_opt_save_unstripped=true; shift;; --wrkdir) pp_opt_wrkdir="$2"; shift;shift;; --vas-platforms) pp_opt_vas_platforms=true; shift;; --verbose) pp_opt_verbose=true; shift;; --version) pp_opt_version=true; shift;; --help) pp_errors=true; shift;; -) break;; -*) pp_error "unknown option $1"; shift;; *) break;; esac done pp_opt_input=- if test $# -gt 0; then pp_opt_input="$1" shift fi #-- extra arguments of the form Foo=bar alter *global* vars while test $# -gt 0; do case "$1" in -*) pp_error "unexpected option '$1'" shift;; *=*) _val="${1#*=}" _var=${1%="$_val"} _val=`echo "$_val"|sed -e 's/[$"\\]/\\&/g'` pp_debug "setting $_var = \"$_val\"" pp_opt_init_vars="$pp_opt_init_vars$_var=\"$_val\";" shift;; *) pp_error "unexpected argument $1'" shift;; esac done test $# -gt 0 && pp_error "unknown argument $1" if $pp_errors; then cat <<. >&2 polypkg $pp_version $pp_copyright usage: $0 [options] [input.pp] [var=value ...] -d --debug -- write copious info to stderr --destdir=path -- file root, defaults to \$DESTDIR -? --help -- display this information -i --install-script=path -- create an install helper script -l --list -- write package filenames to stdout --no-clean -- don't remove temporary files --no-package -- do everything but create packages --only-front -- only perform front-end actions -p --platform=platform -- defaults to local platform --probe -- print local system identifier, then exit --strip -- strip debug symbols from binaries before packaging (modifies files in destdir) --save-unstripped -- save unstripped binaries to \$name-\$version-unstripped.tar.gz --wrkdir=path -- defaults to subdirectory of \$TMPDIR or /tmp -v --verbose -- write info to stderr --version -- display version and quit . exit 1 fi } pp_drive () { # initialise the front and back ends pp_model_init pp_frontend_init $pp_opt_only_front || pp_backend_init # run the front-end to generate the intermediate files # set $pp_input_dir to be the 'include dir' if needed pp_debug "calling frontend on $pp_opt_input" case "$pp_opt_input" in -) pp_input_dir=. test -t 1<&0 && pp_warn "reading directives from standard input" pp_frontend ;; */*) pp_input_dir=${pp_opt_input%/*} pp_frontend <"$pp_opt_input" ;; *) pp_input_dir=. pp_frontend <"$pp_opt_input" ;; esac pp_files_ignore_others pp_service_scan_groups # some sanity checks after front-end processing if test x"$pp_platform" != x"null"; then pp_debug "sanity checks" test -n "$pp_components" || pp_error "No components?" pp_check_var_is_defined "name" pp_check_var_is_defined "version" pp_files_check_duplicates pp_files_check_coverage pp_die_if_errors "Errors during sanity checks" fi # stop now if we're only running the front $pp_opt_only_front && return if test x"$pp_opt_strip" = x"true"; then pp_strip_binaries fi # run the back-end to generate the package pp_debug "calling backend" pp_backend pp_die_if_errors "Errors during backend processing" # copy the resulting package files to PP_PKGDESTDIR or . for f in `pp_backend_names` -; do test x"$f" = x"-" && continue pp_debug "copying: $f to `pwd`" if pp_verbose cp -r $pp_wrkdir/$f ${PP_PKGDESTDIR:-.}; then echo "${PP_PKGDESTDIR:+$PP_PKGDESTDIR/}$f" else pp_error "$f: missing package" fi done pp_die_if_errors "Errors during package copying" } pp_install_script () { pp_debug "writing install script to $pp_opt_install_script" rm -f $pp_opt_install_script pp_backend_install_script > $pp_opt_install_script pp_die_if_errors "Errors during package install script" chmod +x $pp_opt_install_script } pp_main () { # If PP_DEV_PATH is set, then jump to that script. # (Useful when working on polypkg source that isn't installed) if test -n "$PP_DEV_PATH" -a x"$PP_DEV_PATH" != x"$0"; then pp_warn "switching from $0 to $PP_DEV_PATH ..." exec "$PP_DEV_PATH" "$@" || exit 1 fi pp_set_expand_converter_or_reexec "$@" pp_parseopts "$@" if $pp_opt_version; then #-- print version and exit echo "polypkg $pp_version" exit 0 fi pp_set_platform trap 'pp_main_cleanup' 0 pp_wrkdir="$pp_opt_wrkdir" pp_debug "pp_wrkdir = $pp_wrkdir" rm -rf "$pp_wrkdir" mkdir -p "$pp_wrkdir" pp_destdir="$pp_opt_destdir" pp_debug "pp_destdir = $pp_destdir" if $pp_opt_probe; then pp_backend_init pp_backend_probe elif $pp_opt_vas_platforms; then pp_backend_init pp_backend_vas_platforms elif test -n "$pp_opt_eval"; then #-- execute a shell command eval "$pp_opt_eval" || exit else pp_drive if test -n "$pp_opt_install_script"; then pp_install_script fi fi exit 0 } pp_errors=false if test -n "$TERM" -a -t 1 && (tput op) >/dev/null 2>/dev/null; then pp_col_redfg=`tput setf 4` 2>/dev/null pp_col_bluefg=`tput setf 1` 2>/dev/null pp_col_reset=`tput op` 2>/dev/null else pp_col_redfg='[' pp_col_bluefg='[' pp_col_reset=']' fi pp__warn () { if test x"" = x"$pp_lineno"; then echo "$1 $2" >&2 else echo "$1 line $pp_lineno: $2" >&2 fi } pp_warn () { pp__warn "pp: ${pp_col_redfg}warning${pp_col_reset}" "$*" } pp_error () { pp__warn "pp: ${pp_col_redfg}error${pp_col_reset}" "$*" pp_errors=true } pp_die () { pp_error "$@" exit 1 } pp_die_if_errors () { $pp_errors && pp_die "$@" } pp_debug () { $pp_opt_debug && echo "${pp_col_bluefg}debug${pp_col_reset} $*" >&2 } pp_verbose () { $pp_opt_verbose && echo "pp: ${pp_col_bluefg}info${pp_col_reset} $*" >&2 "$@"; } pp_substitute () { sed -e 's,%(\([^)]*\)),`\1`,g' \ -e 's,%{\([^}]*\)},${\1},g' \ -e 's,$,,' | tr '' '\012' | sed -e '/^[^]/s/["$`\\]/\\&/g' \ -e 's/^//' \ -e '1s/^/echo "/' \ -e '$s,$,",' \ -e 's,,"echo ",g' | tr -d '\012' | tr '' '\012' echo } pp_incr () { eval "$1=\`expr \$$1 + 1\`" } pp_decr () { eval "$1=\`expr \$$1 - 1\`" } pp_check_var_is_defined () { if eval test -z "\"\$$1\""; then pp_error "\$$1: not set" eval "$1=undefined" fi } pp_contains () { case " $1 " in *" $2 "*) return 0;; *) return 1;; esac } pp_contains_all () { typeset _s _c _l="$1"; shift for _w do pp_contains "$_l" "$_w" || return 1 done return 0 } pp_contains_any () { typeset _s _c _l="$1"; shift for _w do pp_contains "$_l" "$_w" && return 0 done return 1 } pp_add_to_list () { if eval test -z \"\$$1\"; then eval $1='"$2"' elif eval pp_contains '"$'$1'"' '"$2"'; then : already there else eval $1='"$'$1' $2"' fi } pp_unique () { typeset result element result= for element do pp_add_to_list result $element done echo $result } pp_mode_strip_altaccess () { case "$1" in ??????????[+.]) echo `echo "$1" | cut -b -10`;; *) echo "$1";; esac } pp_mode_from_ls () { typeset umode gmode omode smode set -- `pp_mode_strip_altaccess "$1"` case "$1" in ?--[-X]??????) umode=0;; ?--[xs]??????) umode=1;; ?-w[-X]??????) umode=2;; ?-w[xs]??????) umode=3;; ?r-[-X]??????) umode=4;; ?r-[xs]??????) umode=5;; ?rw[-X]??????) umode=6;; ?rw[xs]??????) umode=7;; *) pp_error "bad user mode $1";; esac case "$1" in ????--[-S]???) gmode=0;; ????--[xs]???) gmode=1;; ????-w[-S]???) gmode=2;; ????-w[xs]???) gmode=3;; ????r-[-X]???) gmode=4;; ????r-[xs]???) gmode=5;; ????rw[-X]???) gmode=6;; ????rw[xs]???) gmode=7;; *) pp_error "bad group mode $1";; esac case "$1" in ???????--[-T]) omode=0;; ???????--[xt]) omode=1;; ???????-w[-T]) omode=2;; ???????-w[xt]) omode=3;; ???????r-[-T]) omode=4;; ???????r-[xt]) omode=5;; ???????rw[-T]) omode=6;; ???????rw[xt]) omode=7;; *) pp_error "bad other mode $1";; esac case "$1" in ???[-x]??[-x]??[-x]) smode=;; ???[-x]??[-x]??[tT]) smode=1;; ???[-x]??[Ss]??[-x]) smode=2;; ???[-x]??[Ss]??[tT]) smode=3;; ???[Ss]??[-x]??[-x]) smode=4;; ???[Ss]??[-x]??[tT]) smode=5;; ???[Ss]??[Ss]??[-x]) smode=6;; ???[Ss]??[Ss]??[tT]) smode=7;; *) pp_error "bad set-id mode $1";; esac echo "$smode$umode$gmode$omode" } pp_find_recurse () { pp_debug "find: ${1#$pp_destdir}/" for f in "$1"/.* "$1"/*; do case "$f" in */.|*/..) continue;; esac # should never happen! if test -d "$f" -o -f "$f" -o -h "$f"; then if test -d "$f" -a ! -h "$f"; then echo "${f#$pp_destdir}/" pp_find_recurse "$f" else echo "${f#$pp_destdir}" fi fi done } pp_prepend () { #test -t && pp_warn "pp_prepend: stdin is a tty?" if test -f $1; then pp_debug "prepending to $1" mv $1 $1._prepend cat - $1._prepend >$1 rm -f $1._prepend else pp_debug "prepend: creating $1" cat >$1 fi } pp_note_file_used() { echo "$1" >> $pp_wrkdir/all.files } pp_create_dir_if_missing () { case "$1" in */) pp_error "pp_create_dir_if_missing: trailing / forbidden";; "") return 0;; *) if test ! -d "$pp_destdir$1"; then pp_debug "fabricating directory $1/" pp_create_dir_if_missing "${1%/*}" mkdir "$pp_destdir$1" && pp_note_file_used "$1/" pp_remove_later "$1" && chmod ${2:-755} "$pp_destdir$1" fi;; esac } pp_add_file_if_missing () { typeset dir #-- check that the file isn't already declared in the component if test -s $pp_wrkdir/%files.${2:-run}; then awk "\$6 == \"$1\" {exit 1}" < $pp_wrkdir/%files.${2:-run} || return 1 fi pp_create_dir_if_missing "${1%/*}" pp_debug "fabricating file $1" echo "f ${3:-755} - - ${4:--} $1" >> $pp_wrkdir/%files.${2:-run} pp_note_file_used "$1" pp_remove_later "$1" return 0 } pp_add_transient_file () { test -f "$pp_destdir$1" && pp_die "$pp_destdir$1: exists" pp_create_dir_if_missing "${1%/*}" pp_debug "transient file $1" pp_note_file_used "$1" pp_remove_later "$1" } pp_remove_later () { { echo "$1" test -s $pp_wrkdir/pp_cleanup && cat $pp_wrkdir/pp_cleanup } > $pp_wrkdir/pp_cleanup.new mv $pp_wrkdir/pp_cleanup.new $pp_wrkdir/pp_cleanup } pp_ls_readlink () { if test -h "$1"; then ls -1ld "$1" | sed -ne 's,.* -> ,,p' else echo "$1: not a symbolic link" >&2 return 1 fi } pp_remove_later_now () { typeset f if test -s $pp_wrkdir/pp_cleanup; then pp_debug "pp_remove_later_now" while read f; do pp_debug "removing $pp_destdir$f" if test -d $pp_destdir$f; then rmdir $pp_destdir$f else rm $pp_destdir$f fi done < $pp_wrkdir/pp_cleanup rm $pp_wrkdir/pp_cleanup fi } pp_readlink() { pp_debug "&& pp_readlink_fn=$pp_readlink_fn" if test -n "$pp_readlink_fn"; then pp_debug "&& calling $pp_readlink_fn $*" "$pp_readlink_fn" "$@" else readlink "$@" fi } pp_install_script_common () { cat <<-. # Automatically generated for # $name $version ($pp_platform) # by PolyPackage $pp_version usage () { case "$1" in "list-services") echo "usage: \$0 list-services" ;; "list-components") echo "usage: \$0 list-components" ;; "list-files") echo "usage: \$0 list-files {cpt...|all}" ;; "install") echo "usage: \$0 install {cpt...|all}" ;; "uninstall") echo "usage: \$0 uninstall {cpt...|all}" ;; "start") echo "usage: \$0 start {svc...}" ;; "stop") echo "usage: \$0 stop {svc...}" ;; "print-platform") echo "usage: \$0 print-platform" ;; *) echo "usage: \$0 [-q] command [args]" echo " list-services" echo " list-components" echo " list-files {cpt...|all}" echo " install {cpt...|all}" echo " uninstall {cpt...|all}" echo " start {svc...}" echo " stop {svc...}" echo " print-platform" ;; esac >&2 exit 1 } if test x"\$1" = x"-q"; then shift verbose () { "\$@"; } verbosemsg () { : ; } else verbose () { echo "+ \$*"; "\$@"; } verbosemsg () { echo "\$*"; } fi . } pp_functions () { typeset func deps allfuncs allfuncs= while test $# -gt 0; do pp_add_to_list allfuncs "$1" deps=`pp_backend_function "$1:depends"` shift set -- `pp_unique "$@" $deps` done for func in $allfuncs do pp_debug "generating function code for '$1'" echo "" echo "$func () {" case "$func" in pp_mkgroup|pp_mkuser|pp_havelib) echo <<.;; if test \$# -lt 1; then echo "$func: not enough arguments" >&2 return 1 fi . esac pp_backend_function "$func" || cat <<. echo "$func: not implemented" >&2 return 1 . echo "}" done } pp_function () { pp_functions "$1" } pp_makevar () { #-- convert all non alpha/digits to underscores echo "$*" | tr -c '[a-z][A-Z][0-9]\012' '[_*]' } pp_getpwuid () { awk -F: '$3 == uid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' uid="$1" \ < /etc/passwd || pp_error "no local username for uid $1" } pp_getgrgid () { awk -F: '$3 == gid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' gid="$1" \ < /etc/group || pp_error "no local group for gid $1" } pp_backend_function_getopt () { cat <<'..' pp_getopt () { _pp_optstring="$1"; shift; eval `_pp_getopt "$_pp_optstring"` } _pp_getopt_meta=s,[\\\\\"\'\`\$\&\;\(\)\{\}\#\%\ \ ],\\\\\&,g _pp_protect () { sed "$_pp_getopt_meta" <<. | tr '\012' ' ' $* . } _pp_protect2 () { sed "s,^..,,$pp_getopt_meta" <<. | tr '\012' ' ' $* . } _pp_nonl () { tr '\012' ' ' <<. $* . } _pp_getopt () { _pp_nonl '_pp_nonl set --; while test $# -gt 0; do case "$1" in "--") shift; break;;' sed 's/\([^: ]:*\)/<@<\1>@>/g; s/<@<\(.\):>@>/"-\1") _pp_nonl -"\1"; _pp_protect "$2"; shift; shift;; "-\1"*) _pp_nonl -"\1"; _pp_protect2 "$1"; shift;;/g;s/<@<\(.\)>@>/ "-\1") _pp_nonl -"\1"; shift;; "-\1"*) _pp_nonl -"\1"; _pp_tmp="$1"; shift; set -- -`_pp_protect2 "$_pp_tmp"` "$@";;/g' <<. $1 . _pp_nonl '-*) echo "$1: unknown option">&2; return 1;; *) break;; esac; done; _pp_nonl --; while test $# -gt 0; do _pp_nonl "$1"; shift; done; echo' echo } .. } pp_copy_unstripped () { typeset filedir realdir filedir="`dirname ${1#$pp_destdir}`" realdir="$pp_wrkdir/unstripped/$filedir" mkdir -p "$realdir" # Can't use hardlinks because `strip` modifies the original file in-place cp "$1" "$realdir" } pp_package_stripped_binaries () { (cd "$pp_wrkdir/unstripped" && tar -c .) \ | gzip > "$name-dbg-$version.tar.gz" rm -rf "$pp_wrkdir/unstripped" } pp_strip_binaries () { if test x"$pp_opt_save_unstripped" = x"true"; then rm -rf "$pp_wrkdir/unstripped" mkdir "$pp_wrkdir/unstripped" fi for f in `find "$pp_destdir" -type f`; do if file "$f" | awk '{print $2}' | grep ^ELF >/dev/null 2>&1; then if test x"$pp_opt_save_unstripped" = x"true"; then if file "$f" | LC_MESSAGES=C grep 'not stripped' >/dev/null 2>&1; then pp_debug "Saving unstripped binary $f" pp_copy_unstripped "$f" else pp_debug "$f is already stripped; not saving a copy" fi fi pp_debug "Stripping unnecessary symbols from $f" strip "$f" fi done if test x"$pp_opt_save_unstripped" = x"true"; then pp_package_stripped_binaries fi } pp_if_true=0 pp_if_false=0 pp_frontend_init () { name= version= build_number= summary="no summary" description="No description" copyright="Copyright 2018 One Identity LLC. ALL RIGHTS RESERVED." #-- if the user supplied extra arguments on the command line # then load them now. pp_debug "pp_opt_init_vars=$pp_opt_init_vars" test -n "$pp_opt_init_vars" && eval "$pp_opt_init_vars" } pp_is_qualifier () { typeset ret case "$1" in "["*"]") ret=true;; *) ret=false;; esac pp_debug "is_qualifier: $* -> $ret" test $ret = true } pp_eval_qualifier () { typeset ret case "$1" in "[!$pp_platform]"| \ "[!"*",$pp_platform]"| \ "[!$pp_platform,"*"]"| \ "[!"*",$pp_platform,"*"]") ret=false;; "[!"*"]") ret=true;; "[$pp_platform]"| \ "["*",$pp_platform]"| \ "[$pp_platform,"*"]"| \ "["*",$pp_platform,"*"]") ret=true;; "["*"]") ret=false;; *) pp_die "pp_eval_qualifier: bad qualifier '$1'" esac pp_debug "eval: $* -> $ret" test true = $ret } pp_frontend_if () { typeset ifcmd ifret ifcmd="$1"; shift case "$ifcmd" in %if) if test 0 = $pp_if_false; then case "$*" in true |1) pp_incr pp_if_true;; false|0) pp_incr pp_if_false;; *) ifret=true if pp_is_qualifier "$*"; then pp_eval_qualifier "$*" || ifret=false else eval test "$@" || ifret=false pp_debug "evaluating test $* -> $ifret" fi pp_incr pp_if_$ifret ;; esac else pp_incr pp_if_false fi;; %else) test $# = 0 || pp_warn "ignoring argument to %else" if test $pp_if_false -gt 1; then : no change elif test $pp_if_false = 1; then pp_incr pp_if_true pp_decr pp_if_false elif test $pp_if_true = 0; then pp_die "unmatched %else" else pp_incr pp_if_false pp_decr pp_if_true fi;; %endif) test $# = 0 || pp_warn "ignoring argument to %endif" if test $pp_if_false -gt 0; then pp_decr pp_if_false elif test $pp_if_true -gt 0; then pp_decr pp_if_true else pp_die "unmatched %endif" fi;; *) pp_die "frontend_if: unknown cmd $ifcmd";; esac } pp_frontend () { typeset section newsection sed_word sed_ws line cpt svc typeset section_enabled newsection_enabled s sed sed_candidate section='%_initial' newsection='%_initial' section_enabled=: newsection_enabled=: sed_word="[a-zA-Z_][a-zA-Z_0-9]*" sed_ws="[ ]" #-- not all seds are created equal sed= for sed_candidate in ${PP_SED:-sed} /usr/xpg4/bin/sed; do if echo 'foo' | $sed_candidate -ne '/^\(x\)*foo/p' | grep foo > /dev/null then sed="$sed_candidate" break fi done test -z "$sed" && pp_die "sed is broken on this system" pp_lineno=0 #-- Note: this sed script should perform similar to pp_eval_qualifier() $sed -e "/^#/s/.*//" \ -e "/^\\[!\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]/s/.*//" \ -e "s/^\\[\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]$sed_ws*//" \ -e "s/^\\[!\\($sed_word,\\)*$sed_word\\]$sed_ws*//" \ -e "/^\\[\\($sed_word,\\)*$sed_word\\]/s/.*//" \ -e "s/^%$sed_ws*/%/" \ -e "s/^$sed_ws/%\\\\&/" \ > $pp_wrkdir/frontend.tmp #-- add an ignore section at the end to force section completion echo '%ignore' >> $pp_wrkdir/frontend.tmp echo >> $pp_wrkdir/frontend.tmp exec 0<$pp_wrkdir/frontend.tmp : > $pp_wrkdir/tmp : > $pp_wrkdir/%fixup while read -r line; do #-- Convert leading double-% to single-%, or switch sections pp_incr pp_lineno pp_debug "line $pp_lineno: $line" set -f set -- $line set +f #pp_debug "line $pp_lineno: $*" case "$line" in %*) case "$1" in %if|%else|%endif) pp_debug "processing if directive $1" pp_frontend_if "$@" continue;; esac test 0 -ne $pp_if_false && continue # ignore lines %if'd out case "$1" in %set|%fixup|%ignore) pp_debug "processing new section $1" newsection="$1"; shift newsection_enabled=: if pp_is_qualifier "$1"; then pp_eval_qualifier "$1" || newsection_enabled=false shift fi test $# -eq 0 || pp_warn "ignoring extra arguments: $line" continue;; %pre|%post|%preun|%postup|%preup|%postun|%files|%depend|%check|%conflict) pp_debug "processing new component section $*" s="$1"; shift if test $# -eq 0 || pp_is_qualifier "$1"; then cpt=run else cpt="$1" shift fi newsection="$s.$cpt" newsection_enabled=: if test $# -gt 0 && pp_is_qualifier "$1"; then pp_eval_qualifier "$1" || newsection_enabled=false shift fi test $# -eq 0 || pp_warn "ignoring extra arguments: $line" case "$cpt" in run|dbg|doc|dev) $newsection_enabled && pp_add_component "$cpt";; x-*) :;; # useful for discarding stuff *) pp_error "unknown component: $1 $cpt";; esac continue;; %pp) newsection="%ignore"; shift if test $# -gt 0; then pp_set_api_version "$1" shift else pp_error "%pp: missing version" fi test $# -gt 0 && pp_error "%pp: too many arguments" continue;; %service) pp_debug "processing new service section $1 $2" s="$1"; shift if test $# -eq 0 || pp_is_qualifier "$1"; then pp_error "$s: service name required" svc=unknown else svc="$1"; shift fi newsection="$s.$svc" newsection_enabled=: if test $# -gt 0 && pp_is_qualifier "$1"; then pp_eval_qualifier "$1" || newsection_enabled=false shift fi test $# -eq 0 || pp_warn "ignoring extra arguments: $line" $newsection_enabled && pp_add_service "$svc" continue;; %\\*) pp_debug "removing leading %\\" line="${line#??}" pp_debug " result is <$line>" set -f set -- $line set +f ;; %%*) pp_debug "removing leading %" line="${line#%}" set -f set -- $line set +f ;; %*) pp_error "unknown section $1" newsection='%ignore' newsection_enabled=: continue;; esac;; esac test 0 != $pp_if_false && continue # ignore lines %if'd out pp_debug "section=$section (enabled=$section_enabled) newsection=$newsection (enabled=$newsection_enabled)" #-- finish processing a previous section if test x"$newsection" != x""; then $section_enabled && case "$section" in %ignore|%_initial) pp_debug "leaving ignored section $section" : ignore # guaranteed to be the last section ;; %set) pp_debug "leaving $section: sourcing $pp_wrkdir/tmp" $pp_opt_debug && cat $pp_wrkdir/tmp >&2 . $pp_wrkdir/tmp : > $pp_wrkdir/tmp ;; %pre.*|%preun.*|%post.*|%postup.*|%preup.*|%postun.*|%depend.*|%check.*|%conflict.*|%service.*|%fixup) pp_debug "leaving $section: substituting $pp_wrkdir/tmp" # cat $pp_wrkdir/tmp >&2 # debugging $pp_opt_debug && pp_substitute < $pp_wrkdir/tmp >&2 pp_substitute < $pp_wrkdir/tmp > $pp_wrkdir/tmp.sh . $pp_wrkdir/tmp.sh >> $pp_wrkdir/$section || pp_error "shell error in $section" rm -f $pp_wrkdir/tmp.sh : > $pp_wrkdir/tmp ;; esac section="$newsection" section_enabled="$newsection_enabled" newsection= fi #-- ignore section content that is disabled $section_enabled || continue #-- process some lines in-place case "$section" in %_initial) case "$line" in "") continue;; esac # ignore non-section blanks pp_die "Ignoring text before % section introducer";; %set|%pre.*|%preun.*|%post.*|%postup.*|%preup.*|%postun.*|%check.*|%service.*|%fixup) pp_debug "appending line to \$pp_wrkdir/tmp" echo "$line" >> $pp_wrkdir/tmp ;; %files.*) test $# -eq 0 && continue; pp_files_expand "$@" >> $pp_wrkdir/$section ;; %depend.*) pp_debug "Adding explicit dependency $@ to $cpt" echo "$@" >> $pp_wrkdir/%depend.$cpt ;; %conflict.*) pp_debug "Adding explicit conflict $@ to $cpt" echo "$@" >> $pp_wrkdir/%conflict.$cpt ;; esac done exec <&- if test $pp_if_true != 0 -o $pp_if_false != 0; then pp_die "missing %endif at end of file" fi pp_lineno= pp_debug " name = $name" pp_debug " version = $version" pp_debug " summary = $summary" pp_debug " description = $description" pp_debug " copyright = $copyright" pp_debug "" pp_debug "\$pp_components: $pp_components" pp_debug "\$pp_services: $pp_services" } pp_set_api_version() { case "$1" in 1.0) : ;; *) pp_error "This version of polypackage is too old";; esac } pp_platform= pp_set_platform () { if test -n "$pp_opt_platform"; then pp_contains "$pp_platforms" "$pp_opt_platform" || pp_die "$pp_opt_platform: unknown platform" pp_platform="$pp_opt_platform" else uname_s=`uname -s 2>/dev/null` pp_platform= for p in $pp_platforms; do pp_debug "probing for platform $p" if eval pp_backend_${p}_detect "$uname_s"; then pp_platform="$p" break; fi done test -z "$pp_platform" && pp_die "cannot detect platform (supported: $pp_platforms)" fi pp_debug "pp_platform = $pp_platform" } pp_expand_path= pp_expand_test_usr_bin () { awk '$1 == "/usr" || $2 == "/usr" {usr++} $1 == "/bin" || $2 == "/bin" {bin++} END { if (usr == 1 && bin == 1) exit(0); else exit(1); }' } pp_set_expand_converter_or_reexec () { test -d /usr -a -d /bin || pp_die "missing /usr or /bin" echo /usr /bin | pp_expand_test_usr_bin || pp_die "pp_expand_test_usr_bin?" if (eval "echo /{usr,bin}" | pp_expand_test_usr_bin) 2>/dev/null; then pp_expand_path=pp_expand_path_brace elif (eval "echo /@(usr|bin)" | pp_expand_test_usr_bin) 2>/dev/null; then pp_expand_path=pp_expand_path_at else test x"$pp_expand_rexec" != x"true" || pp_die "problem finding shell that can do brace expansion" for shell in bash ksh ksh93; do if ($shell -c 'echo /{usr,bin}' | pp_expand_test_usr_bin) 2>/dev/null || ($shell -c 'echo /@(usr|bin)' | pp_expand_test_usr_bin) 2>/dev/null then pp_debug "switching to shell $shell" pp_expand_rexec=true exec $shell "$0" "$@" fi done pp_die "cannot find a shell that does brace expansion" fi } pp_expand_path_brace () { typeset f eval "for f in $1; do echo \"\$f\"; done|sort -u" } pp_expand_path_at () { typeset f eval "for f in ` echo "$1" | sed -e 's/{/@(/g' -e 's/}/)/g' -e 's/,/|/g' `; do echo \"\$f\"; done|sort -u" } pp_shlib_suffix='.so*' pp_model_init () { #@ $pp_components: whitespace-delimited list of components seen in %files pp_components= #@ $pp_services: whitespace-delimited list of %service seen pp_services= rm -f $pp_wrkdir/%files.* \ $pp_wrkdir/%post.* \ $pp_wrkdir/%pre.* \ $pp_wrkdir/%preun.* \ $pp_wrkdir/%postup.* \ $pp_wrkdir/%postun.* \ $pp_wrkdir/%service.* \ $pp_wrkdir/%set \ $pp_wrkdir/%fixup } pp_have_component () { pp_contains "$pp_components" "$1" } pp_have_all_components () { pp_contains_all "$pp_components" "$@" } pp_add_component () { pp_add_to_list 'pp_components' "$1" } pp_add_service () { pp_add_to_list 'pp_services' "$1" } pp_service_init_vars () { cmd= pidfile= stop_signal=15 # SIGTERM user=root group= enable=yes # make it so the service starts on boot optional=no # Whether installing this service is optional pp_backend_init_svc_vars } pp_service_check_vars () { test -n "$cmd" || pp_error "%service $1: cmd not defined" case "$enable" in yes|no) : ;; *) pp_error "%service $1: \$enable must be set to yes or no";; esac } pp_load_service_vars () { pp_service_init_vars . "$pp_wrkdir/%service.$1" pp_service_check_vars "$1" } pp_files_expand () { typeset _p _mode _group _owner _flags _path _optional _has_target _tree typeset _target _file _tgt _m _o _g _f _type _lm _ll _lo _lg _ls _lx typeset _ignore _a test $# -eq 0 && return pp_debug "pp_files_expand: path is: $1" case "$1" in "#"*) return;; esac _p="$1"; shift pp_debug "pp_files_expand: other arguments: $*" #-- the mode must be an octal number of at least three digits _mode="=" _a=`eval echo \"$1\"` case "$_a" in *:*) :;; -|=|[01234567][01234567][01234567]*) _mode="$_a"; shift;; esac #-- the owner:group field may have optional parts _a=`eval echo \"$1\"` case "$_a" in *:*) _group=${_a#*:}; _owner=${_a%:*}; shift;; =|-) _group=$_a; _owner=$_a; shift;; *) _group=; _owner=;; esac #-- process the flags argument _flags= _target= _optional=false _has_target=false _ignore=false if test $# -gt 0; then _a=`eval echo \"$1\"` case ",$_a," in *,volatile,*) _flags="${_flags}v";; esac case ",$_a," in *,optional,*) _optional=true;; esac case ",$_a," in *,symlink,*) _has_target=true;; esac case ",$_a," in *,ignore-others,*) _flags="${_flags}i";; esac case ",$_a," in *,ignore,*) _ignore=true;; esac shift fi #-- process the target argument if $_has_target; then test $# -ne 0 || pp_error "$_p: missing target" _a=`eval echo \"$1\"` _target="$_a" shift fi pp_debug "pp_files_expand: $_mode|$_owner:$_group|$_flags|$_target|$*" test $# -eq 0 || pp_error "$_p: too many arguments" #-- process speciall suffixes tree= case "$_p" in *"/**") _p="${_p%"/**"}"; tree="**";; *".%so") _p="${_p%".%so"}$pp_shlib_suffix";; esac #-- expand the path using the shell glob pp_debug "expanding .$_p ... with $pp_expand_path" (cd ${pp_destdir} && $pp_expand_path ".$_p") > $pp_wrkdir/tmp.files.exp #-- expand path/** by rewriting the glob output file case "$tree" in "") : ;; "**") pp_debug "expanding /** tree ..." while read _path; do _path="${_path#.}" pp_find_recurse "$pp_destdir${_path%/}" done < $pp_wrkdir/tmp.files.exp | sort -u > $pp_wrkdir/tmp.files.exp2 mv $pp_wrkdir/tmp.files.exp2 $pp_wrkdir/tmp.files.exp ;; esac while read _path; do _path="${_path#.}" _file="${pp_destdir}${_path}" _tgt= _m="$_mode" _o="${_owner:--}" _g="${_group:--}" _f="$_flags" case "$_path" in /*) :;; *) pp_warn "$_path: inserting leading /" _path="/$_path";; # ensure leading / esac #-- sanity checks case "$_path" in */../*|*/..) pp_error "$_path: invalid .. in path";; */./*|*/.) pp_warn "$_path: invalid component . in path";; *//*) pp_warn "$_path: redundant / in path";; esac #-- set the type based on the real file's type if $_ignore; then _type=f _m=_ _o=_ _g=_ elif test -h "$_file"; then case "$_path" in */) pp_warn "$_path (symlink $_file): removing trailing /" _path="${_path%/}" ;; esac _type=s if test x"$_target" != x"=" -a -n "$_target"; then _tgt="$_target" pp_debug "symlink target is $_tgt" else _tgt=`pp_readlink "$_file"`; test -z "$_tgt" && pp_error "can't readlink $_file" case "$_tgt" in ${pp_destdir}/*) pp_warn "stripped \$destdir from symlink ($_path)" _tgt="${_tgt#$pp_destdir}";; esac fi _m=777 elif test -d "$_file"; then #-- display a warning if the user forgot the trailing / case "$_path" in */) :;; *) pp_warn "$_path (matching $_file): adding trailing /" _path="$_path/";; esac _type=d $_has_target && pp_error "$_file: not a symlink" elif test -f "$_file"; then case "$_path" in */) pp_warn "$_path (matching $_file): removing trailing /" _path="${_path%/}" ;; esac _type=f $_has_target && pp_error "$_file: not a symlink" else $_optional && continue pp_error "$_file: missing" _type=f fi #-- convert '=' shortcuts into mode/owner/group from ls case ":$_m:$_o:$_g:" in *:=:*) if LS_OPTIONS=--color=never /bin/ls -ld "$_file" \ > $pp_wrkdir/ls.tmp then read _lm _ll _lo _lg _ls _lx < $pp_wrkdir/ls.tmp test x"$_m" = x"=" && _m=`pp_mode_from_ls "$_lm"` test x"$_o" = x"=" && _o="$_lo" test x"$_g" = x"=" && _g="$_lg" else pp_error "cannot read $_file" test x"$_m" = x"=" && _m=- test x"$_o" = x"=" && _o=- test x"$_g" = x"=" && _g=- fi ;; esac test -n "$_f" || _f=- #-- sanity checks test -n "$_type" || pp_die "_type empty" test -n "$_path" || pp_die "_path empty" test -n "$_m" || pp_die "_m empty" test -n "$_o" || pp_die "_o empty" test -n "$_g" || pp_die "_g empty" #-- setuid/gid files must be given an explicit owner/group (or =) case "$_o:$_g:$_m" in -:*:[4657][1357]??|-:*:[4657]?[1357]?|-:*:[4657]??[1357]) pp_error "$_path: setuid file ($_m) missing explicit owner";; *:-:[2367][1357]??|*:-:[2367]?[1357]?|*:-:[2367]??[1357]) pp_error "$_path: setgid file ($_m) missing explicit group";; esac # convert numeric uids into usernames; only works for /etc/passwd case "$_o" in [0-9]*) _o=`pp_getpwuid $_o`;; esac case "$_g" in [0-9]*) _g=`pp_getgrgid $_g`;; esac pp_debug "$_type $_m $_o $_g $_f $_path" $_tgt $_ignore || echo "$_type $_m $_o $_g $_f $_path" $_tgt pp_note_file_used "$_path" case "$_f" in *i*) echo "$_path" >> $pp_wrkdir/ign.files;; esac done < $pp_wrkdir/tmp.files.exp } pp_files_check_duplicates () { typeset _path if test -s $pp_wrkdir/all.files; then sort < $pp_wrkdir/all.files | uniq -d > $pp_wrkdir/duplicate.files if test -f $pp_wrkdir/ign.awk; then # Remove ignored files mv $pp_wrkdir/duplicate.files $pp_wrkdir/duplicate.files.ign sed -e 's/^/_ _ _ _ _ /' < $pp_wrkdir/duplicate.files.ign | awk -f $pp_wrkdir/ign.awk | sed -e 's/^_ _ _ _ _ //' > $pp_wrkdir/duplicate.files fi while read _path; do pp_warn "$_path: file declared more than once" done <$pp_wrkdir/duplicate.files fi } pp_files_check_coverage () { pp_find_recurse "$pp_destdir" | sort > $pp_wrkdir/coverage.avail if test -s $pp_wrkdir/all.files; then sort -u < $pp_wrkdir/all.files else : fi > $pp_wrkdir/coverage.used join -v1 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \ > $pp_wrkdir/coverage.not-packaged if test -s $pp_wrkdir/coverage.not-packaged; then pp_warn "The following files/directories were found but not packaged:" sed -e 's,^, ,' < $pp_wrkdir/coverage.not-packaged >&2 fi join -v2 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \ > $pp_wrkdir/coverage.not-avail if test -s $pp_wrkdir/coverage.not-avail; then pp_warn "The following files/directories were named but not found:" sed -e 's,^, ,' < $pp_wrkdir/coverage.not-avail >&2 fi } pp_files_ignore_others () { typeset p f test -s $pp_wrkdir/ign.files || return #-- for each file in ign.files, we remove it from all the # other %files.* lists, except where it has an i flag. # rather than scan each list multiple times, we build # an awk script pp_debug "stripping ignore files" while read p; do echo '$6 == "'"$p"'" && $5 !~ /i/ { next }' done < $pp_wrkdir/ign.files > $pp_wrkdir/ign.awk echo '{ print }' >> $pp_wrkdir/ign.awk $pp_opt_debug && cat $pp_wrkdir/ign.awk for f in $pp_wrkdir/%files.*; do mv $f $f.ign awk -f $pp_wrkdir/ign.awk < $f.ign > $f || pp_error "awk" done } pp_service_scan_groups () { typeset svc #-- scan for "group" commands, and build a list of groups pp_service_groups= if test -n "$pp_services"; then for svc in $pp_services; do group= . $pp_wrkdir/%service.$svc if test -n "$group"; then pp_contains "$pp_services" "$group" && pp_error \ "%service $svc: group name $group in use by a service" pp_add_to_list 'pp_service_groups' "$group" echo "$svc" >> $pp_wrkdir/%svcgrp.$group fi done fi } pp_service_get_svc_group () { (tr '\012' ' ' < $pp_wrkdir/%svcgrp.$1 ; echo) | sed -e 's/ $//' } for _sufx in _init '' _names _cleanup _install_script \ _init_svc_vars _function _probe _vas_platforms do eval "pp_backend$_sufx () { pp_debug pp_backend$_sufx; pp_backend_\${pp_platform}$_sufx \"\$@\"; }" done pp_platforms="$pp_platforms aix" pp_backend_aix_detect () { test x"$1" = x"AIX" } pp_backend_aix_init () { pp_aix_detect_arch pp_aix_detect_os pp_aix_bosboot= # components that need bosboot pp_aix_lang=en_US pp_aix_copyright= pp_aix_start_services_after_install=false pp_aix_init_services_after_install=true pp_aix_sudo=sudo # AIX package tools must run as root case "$pp_aix_os" in *) pp_readlink_fn=pp_ls_readlink;; # XXX esac pp_aix_abis_seen= } pp_aix_detect_arch () { pp_aix_arch_p=`uname -p 2>/dev/null` case "$pp_aix_arch_p" in "") pp_debug "can't get processor type from uname -p" pp_aix_arch_p=powerpc pp_aix_arch=R;; # guess (lsattr -l proc0 ??) powerpc) pp_aix_arch=R;; *) pp_aix_arch_p=intel pp_aix_arch=I;; # XXX? verify esac case "`/usr/sbin/lsattr -El proc0 -a type -F value`" in PowerPC_POWER*) pp_aix_arch_std=ppc64;; PowerPC*) pp_aix_arch_std=ppc;; *) pp_aix_arch_std=unknown;; esac } pp_aix_detect_os () { typeset r v r=`uname -r` v=`uname -v` pp_aix_os=aix$v$r } pp_aix_version_fix () { typeset v v=`echo $1 | sed 's/[-+]/./' | tr -c -d '[0-9].\012' | awk -F"." '{ printf "%d.%d.%d.%.4s\n", $1, $2, $3, $4 }' | sed 's/[.]*$//g'` if test x"$v" != x"$1"; then pp_warn "stripped version '$1' to '$v'" fi case $v in ""|*..*|.*|*.) pp_error "malformed '$1'" echo "0.0.0.0";; *.*.*.*.*) # 5 components are only valid for fileset updates, not base # filesets (full packages). We trim 5+ components down to 4. pp_warn "version '$1' has too many dots for AIX, truncating" echo "$v" | cut -d. -f1-4;; *.*.*.*) echo "$v";; *.*.*) echo "$v.0";; *.*) echo "$v.0.0";; *) echo "$v.0.0.0";; esac } pp_aix_select () { case "$1" in -user) op="";; -root) op="!";; *) pp_die "pp_aix_select: bad argument";; esac #pp_debug awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }' #awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }' awk $op'($6 ~ /^\/usr\// || $6 ~ /^\/opt\//) { print; }' } pp_aix_copy_root () { typeset t m o g f p st target while read t m o g f p st; do case "$t" in d) pp_create_dir_if_missing "$1${p%/}";; f) pp_add_transient_file "$1$p" pp_verbose ln "$pp_destdir$p" "$pp_destdir$1$p" || pp_error "can't link $p into $1";; *) pp_warn "pp_aix_copy_root: filetype $t not handled";; esac done } pp_aix_size () { typeset prefix t m o g f p st prefix="$1" while read t m o g f p st; do case "$t" in f) du -a "$pp_destdir$p";; esac done | sed -e 's!/[^/]*$!!' | sort +1 | awk '{ if ($2 != d) { if (sz) print d,sz; d=$2; sz=0 } sz += $1; } END { if (sz) print d,sz }' | sed -n -e "s!^$pp_destdir!$prefix!p" } pp_aix_list () { awk '{ print "." pfx $6; }' pfx="$1" } pp_aix_make_liblpp () { typeset out dn fl f out="$1"; shift dn=`dirname "$2"` fl= for f do case "$f" in "$dn/"*) fl="$fl `basename $f`" ;; *) pp_die "liblpp name $f not in $dn/";; esac done (cd "$dn" && pp_verbose ar -c -g -r "$out" $fl) || pp_error "ar error" } pp_aix_make_script () { rm -f "$1" echo "#!/bin/sh" > "$1" cat >> "$1" echo "exit 0" >> "$1" chmod +x "$1" } pp_aix_inventory () { typeset fileset t m o g f p st type fileset="$1" while read t m o g f p st; do case "$p" in *:*) pp_error "path $p contains colon";; esac echo "$p:" case "$t" in f) type=FILE; defm=644 ;; s) type=SYMLINK; defm=777 ;; d) type=DIRECTORY; defm=755 ;; esac echo " type = $type" echo " class = inventory,apply,$fileset" if test x"$m" = x"-"; then m="$defm"; fi if test x"$o" = x"-"; then o="root"; fi if test x"$g" = x"-"; then g="system"; fi echo " owner = $o" echo " group = $g" case "$m" in ????) m=`echo $m|sed -e 's/^1/TCB,/' \ -e 's/^[23]/TCB,SGID,/' \ -e 's/^[45]/TCB,SUID,/' \ -e 's/^[67]/TCB,SUID,SGID,/'`;; # vtx bit ignored esac echo " mode = $m" case "$t" in f) if test ! -f "$pp_destdir$p"; then pp_error "$p: missing file" fi case "$flags" in *v*) echo " size = VOLATILE" echo " checksum = VOLATILE" ;; *) if test -r "$pp_destdir$p"; then echo " size = $size" pp_verbose sum -r < "$pp_destdir$p" | sed -e 's/.*/ checksum = "&"/' fi ;; esac;; s) echo " target = $st" ;; esac #-- Record ABI types seen case "$t" in f) if test -r "$pp_destdir$p"; then case "`file "$pp_destdir$p"`" in *"executable (RISC System/6000)"*) abi=ppc;; *"64-bit XCOFF executable"*) abi=ppc64;; *) abi=;; esac if test -n "$abi"; then pp_add_to_list pp_aix_abis_seen $abi fi fi;; esac done } pp_aix_depend () { if test -s "$1"; then pp_warn "aix dependencies not implemented" fi } pp_aix_add_service () { typeset svc cmd_cmd cmd_arg f svc="$1" pp_load_service_vars $svc set -- $cmd cmd_cmd="$1"; shift cmd_arg="${pp_aix_mkssys_cmd_args:-$*}"; case "$stop_signal" in HUP) stop_signal=1;; INT) stop_signal=2;; QUIT) stop_signal=3;; KILL) stop_signal=9;; TERM) stop_signal=15;; USR1) stop_signal=30;; USR2) stop_signal=31;; "") pp_error "%service $svc: stop_signal not set";; [a-zA-Z]*) pp_error "%service $svc: bad stop_signal ($stop_signal)";; esac test -z "$pidfile" || pp_error "aix requires empty pidfile (non daemon)" pp_add_component run if test "$user" = "root"; then uid=0 else uid="\"\`/usr/bin/id -u $user\`\"" fi #-- add command text to create/remove the service cat <<-. >> $pp_wrkdir/%post.$svc svc=$svc uid=0 cmd_cmd="$cmd_cmd" cmd_arg="$cmd_arg" stop_signal=$stop_signal force_signal=9 srcgroup="$pp_aix_mkssys_group" instances_allowed=${pp_aix_mkssys_instances_allowed:--Q} lssrc -s \$svc > /dev/null 2>&1 if [ \$? -eq 0 ]; then lssrc -s \$svc | grep "active" > /dev/null 2>&1 if [ \$? -eq 0 ]; then stopsrc -s \$svc > /dev/null 2>&1 fi rmsys -s \$svc > /dev/null 2>&1 fi mkssys -s \$svc -u \$uid -p "\$cmd_cmd" \${cmd_arg:+-a "\$cmd_arg"} -S -n \$stop_signal -f 9 ${pp_aix_mkssys_args} \${srcgroup:+-G \$srcgroup} \$instances_allowed . #-- add code to start the service on reboot ${pp_aix_init_services_after_install} && cat <<-. >> $pp_wrkdir/%post.$svc id=\`echo "\$svc" | cut -c1-14\` mkitab "\$id:2:once:/usr/bin/startsrc -s \$svc" > /dev/null 2>&1 . ${pp_aix_start_services_after_install} && cat <<-. >> $pp_wrkdir/%post.$svc startsrc -s \$svc . if [ -f "$pp_wrkdir/%post.run" ];then cat $pp_wrkdir/%post.run >> $pp_wrkdir/%post.$svc fi mv $pp_wrkdir/%post.$svc $pp_wrkdir/%post.run ${pp_aix_init_services_after_install} && pp_prepend $pp_wrkdir/%preun.$svc <<-. rmitab `echo "$svc" | cut -c1-14` > /dev/null 2>&1 . pp_prepend $pp_wrkdir/%preun.$svc <<-. stopsrc -s $svc >/dev/null 2>&1 rmssys -s $svc . if [ -f "$pp_wrkdir/%preun.run" ];then cat $pp_wrkdir/%preun.run >> $pp_wrkdir/%preun.$svc fi mv $pp_wrkdir/%preun.$svc $pp_wrkdir/%preun.run } pp_backend_aix () { typeset briefex instuser instroot svc cmp outbff typeset user_wrkdir root_wrkdir typeset user_files root_files test -n "$pp_destdir" || pp_error "AIX backend requires the '--destdir' option" instuser="/usr/lpp/$name" instroot="$instuser/inst_root" pp_aix_bff_name=${pp_aix_bff_name:-$name} # Here is the component mapping: # run -> $pp_aix_bff_name.rte ('Run time environment') # doc -> $pp_aix_bff_name.doc (non-standard) # dev -> $pp_aix_bff_name.adt ('Application developer toolkit') # dbg -> $pp_aix_bff_name.diag ('Diagnostics') test `echo "$summary" | wc -c ` -gt 40 && pp_error "\$summary too long" user_wrkdir=$pp_wrkdir/u root_wrkdir=$pp_wrkdir/r pp_verbose rm -rf $user_wrkdir $root_wrkdir pp_verbose mkdir -p $user_wrkdir $root_wrkdir for svc in $pp_services .; do test . = "$svc" && continue pp_aix_add_service $svc done { echo "4 $pp_aix_arch I $name {" for cmp in $pp_components; do case "$cmp" in run) ex=rte briefex="runtime";; doc) ex=doc briefex="documentation";; dev) ex=adt briefex="developer toolkit";; dbg) ex=diag briefex="diagnostics";; esac user_files=$pp_wrkdir/%files.$cmp.u root_files=$pp_wrkdir/%files.$cmp.r pp_aix_select -user < $pp_wrkdir/%files.$cmp > $user_files pp_aix_select -root < $pp_wrkdir/%files.$cmp > $root_files # Default to USR only unless there are root files, # or a post/pre/check script associated content=U if test -s $root_files \ -o -s $pp_wrkdir/%pre.$cmp \ -o -s $pp_wrkdir/%post.$cmp \ -o -s $pp_wrkdir/%preun.$cmp \ -o -s $pp_wrkdir/%postun.$cmp \ -o -s $pp_wrkdir/%check.$cmp then content=B fi if $pp_opt_debug; then echo "$cmp USER %files:" cat $user_files echo "$cmp ROOT %files:" cat $root_files fi >&2 bosboot=N; pp_contains_any "$pp_aix_bosboot" $cmp && bosboot=b echo $pp_aix_bff_name.$ex \ `[ $pp_aix_version ] && pp_aix_version_fix $pp_aix_version || pp_aix_version_fix "$version"` \ 1 $bosboot $content \ $pp_aix_lang "$summary $briefex" echo "[" pp_aix_depend $pp_wrkdir/%depend.$cmp echo "%" # generate per-directory size information pp_aix_size < $user_files pp_aix_size $instroot < $root_files pp_aix_list < $user_files > $user_wrkdir/$pp_aix_bff_name.$ex.al pp_aix_list $instroot < $root_files >> $user_wrkdir/$pp_aix_bff_name.$ex.al pp_aix_list < $root_files > $root_wrkdir/$pp_aix_bff_name.$ex.al if $pp_opt_debug; then echo "$cmp USER $pp_aix_bff_name.$ex.al:" cat $user_wrkdir/$pp_aix_bff_name.$ex.al echo "$cmp ROOT $pp_aix_bff_name.$ex.al:" cat $root_wrkdir/$pp_aix_bff_name.$ex.al fi >&2 pp_aix_inventory $pp_aix_bff_name.$ex < $user_files \ > $user_wrkdir/$pp_aix_bff_name.$ex.inventory pp_aix_inventory $pp_aix_bff_name.$ex < $root_files \ > $root_wrkdir/$pp_aix_bff_name.$ex.inventory if $pp_opt_debug; then pp_debug "$cmp USER $pp_aix_bff_name.$ex.inventory:" cat $user_wrkdir/$pp_aix_bff_name.$ex.inventory pp_debug "$cmp ROOT $pp_aix_bff_name.$ex.inventory:" cat $root_wrkdir/$pp_aix_bff_name.$ex.inventory fi >&2 if test x"" != x"${pp_aix_copyright:-$copyright}"; then echo "${pp_aix_copyright:-$copyright}" > $user_wrkdir/$pp_aix_bff_name.$ex.copyright echo "${pp_aix_copyright:-$copyright}" > $root_wrkdir/$pp_aix_bff_name.$ex.copyright fi #-- assume that post/pre uninstall scripts only make # sense when installed in a root context if test -r $pp_wrkdir/%pre.$cmp; then pp_aix_make_script $user_wrkdir/$pp_aix_bff_name.$ex.pre_i \ < $pp_wrkdir/%pre.$cmp fi if test -r $pp_wrkdir/%post.$cmp; then pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.post_i \ < $pp_wrkdir/%post.$cmp fi if test -r $pp_wrkdir/%preun.$cmp; then pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.unpost_i \ < $pp_wrkdir/%preun.$cmp fi if test -r $pp_wrkdir/%postun.$cmp; then pp_aix_make_script $root_wrkdir/$pp_aix_bff_name.$ex.unpre_i \ < $pp_wrkdir/%postun.$cmp fi # remove empty files for f in $user_wrkdir/$pp_aix_bff_name.$ex.* $root_wrkdir/$pp_aix_bff_name.$ex.*; do if test ! -s "$f"; then pp_debug "removing empty $f" rm -f "$f" fi done # copy/link the root files so we can do an easy backup later pp_aix_copy_root $instroot < $root_files echo "%" echo "]" done echo "}" } > $pp_wrkdir/lpp_name if $pp_opt_debug; then echo "/lpp_name :" cat $pp_wrkdir/lpp_name fi >&2 #-- copy the /lpp_name file to the destdir pp_add_transient_file /lpp_name cp $pp_wrkdir/lpp_name $pp_destdir/lpp_name #-- copy the liblpp.a files under destdir for packaging (cd $user_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) || pp_error "ar error" if test -s $user_wrkdir/liblpp.a; then pp_add_transient_file $instuser/liblpp.a pp_verbose cp $user_wrkdir/liblpp.a $pp_destdir$instuser/liblpp.a || pp_error "cannot create user liblpp.a" fi (cd $root_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) || pp_error "ar error" if test -s $root_wrkdir/liblpp.a; then pp_add_transient_file $instroot/liblpp.a pp_verbose cp $root_wrkdir/liblpp.a $pp_destdir$instroot/liblpp.a || pp_error "cannot create root liblpp.a" fi { echo ./lpp_name test -s $user_wrkdir/liblpp.a && echo .$instuser/liblpp.a test -s $root_wrkdir/liblpp.a && echo .$instroot/liblpp.a cat $user_wrkdir/$name.*.al # includes the relocated root files! } > $pp_wrkdir/bff.list if test -n "$pp_aix_abis_seen" -a x"$pp_aix_arch_std" = x"auto"; then case "$pp_aix_abis_seen" in "ppc ppc64"|"ppc64 ppc") pp_aix_arch_std=ppc64 ;; ppc|ppc64) pp_aix_arch_std=$pp_aix_abis_seen ;; *" "*) pp_warn "multiple architectures detected: $pp_aix_abis_seen" pp_aix_arch_std=unknown ;; "") pp_warn "no binary executables detected; using noarch" pp_aix_arch_std=noarch ;; *) pp_warn "unknown architecture detected $pp_aix_abis_seen" pp_aix_arch_std=$pp_aix_abis_seen ;; esac fi . $pp_wrkdir/%fixup outbff=`pp_backend_aix_names` pp_debug "creating: $pp_wrkdir/$outbff" (cd $pp_destdir && pp_verbose /usr/sbin/backup -i -q -p -f -) \ < $pp_wrkdir/bff.list \ > $pp_wrkdir/$outbff || pp_error "backup failed" if test -n "$pp_aix_sudo" -o -x /usr/sbin/installp; then $pp_aix_sudo /usr/sbin/installp -l -d $pp_wrkdir/$outbff fi } pp_backend_aix_cleanup () { : } pp_backend_aix_names () { echo "$name.`[ $pp_aix_version ] && pp_aix_version_fix $pp_aix_version || pp_aix_version_fix "$version"`.bff" } pp_backend_aix_install_script () { typeset pkgname platform # # The script should take a first argument being the # operation; further arguments refer to components or services # # list-components -- lists components in the pkg # install component... -- installs the components # uninstall component... -- uninstalles the components # list-services -- lists the services in the pkg # start service... -- starts the name service # stop service... -- stops the named services # print-platform -- prints the platform group # pkgname="`pp_backend_aix_names`" platform="`pp_backend_aix_probe`" # XXX should be derived from files fsets= for cmp in $pp_components; do case "$cmp" in run) ex=rte;; doc) ex=doc;; dev) ex=adt;; dbg) ex=diag;; esac fsets="$fsets $name.$ex" done echo '#!/bin/sh' pp_install_script_common cat <<-. cpt_to_fileset () { test x"\$*" = x"all" && set -- $pp_components for cpt do case "\$cpt" in run) echo "$name.rte";; doc) echo "$name.doc";; dev) echo "$name.adt";; dbg) echo "$name.diag";; *) usage;; esac done } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo "$pp_components" ;; list-services) test \$# -eq 0 || usage \$op echo "$pp_services" ;; list-files) test \$# -ge 1 || usage \$op echo \${PP_PKGDESTDIR:-.}/$pkgname ;; install) test \$# -ge 1 || usage \$op verbose /usr/sbin/installp -acX -V0 -F \ -d \${PP_PKGDESTDIR:-.}/$pkgname \ \`cpt_to_fileset "\$@"\` ;; uninstall) test \$# -ge 1 || usage \$op verbose /usr/sbin/installp -u -e/dev/null \ -V0 \`cpt_to_fileset "\$@"\` ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do verbose \${op}src -s \$svc || ec=1 done exit \$ec ;; print-platform) echo "$platform" ;; *) usage;; esac . } pp_backend_aix_init_svc_vars () { : } pp_backend_aix_probe () { echo "${pp_aix_os}-${pp_aix_arch_std}" } pp_backend_aix_vas_platforms () { case "${pp_aix_arch_std}" in ppc*) :;; *) pp_die "unknown architecture ${pp_aix_arch_std}";; esac case "${pp_aix_os}" in aix43) echo "aix-43";; aix51) echo "aix-51 aix-43";; aix52) echo "aix-51 aix-43";; aix53) echo "aix-53 aix-51 aix-43";; aix61) echo "aix-53 aix-51 aix-43";; *) pp_die "unknown system ${pp_aix_os}";; esac } pp_backend_aix_function () { case "$1" in pp_mkgroup) cat <<'.';; /usr/sbin/lsgroup "$1" >/dev/null && return 0 echo "Creating group $1" /usr/bin/mkgroup -A "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat <<'.';; /usr/sbin/lsuser "$1" >/dev/null && return 0 pp_mkgroup "${2:-$1}" || return 1 echo "Creating user $1" /usr/bin/mkuser \ login=false \ rlogin=false \ account_locked=true \ home="${3:-/nohome.$1}" \ pgrp="${2:-$1}" \ "$1" . pp_havelib) cat <<'.';; case "$2" in "") pp_tmp_name="lib$1.so";; *.*.*) pp_tmp_name="lib$1.so.$2";; *.*) pp_tmp_name="lib$1.so.$2.0";; *) pp_tmp_name="lib$1.so.$2";; esac for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do test -r "$pp_tmp_dir/$pp_tmp_name" -a \ -r "$pp_tmp_dir/lib$1.so" && return 0 done return 1 . *) false;; esac } pp_platforms="$pp_platforms sd" pp_backend_sd_detect () { test x"$1" = x"HP-UX" } pp_backend_sd_init () { pp_sd_sudo=sudo pp_sd_startlevels=2 pp_sd_stoplevels=auto pp_sd_config_file= pp_sd_vendor= pp_sd_vendor_tag=OneIdentity pp_sd_default_start=1 # config_file default start value pp_readlink_fn=pp_ls_readlink # HPUX has no readlink pp_shlib_suffix='.sl' # .so on most other platforms pp_sd_detect_os } pp_sd_detect_os () { typeset revision revision=`uname -r` pp_sd_os="${revision#?.}" test -z "$pp_sd_os" && pp_warn "cannot detect OS version" pp_sd_os_std="hpux`echo $pp_sd_os | tr -d .`" case "`uname -m`" in 9000/[678]??) pp_sd_arch_std=hppa;; ia64) pp_sd_arch_std=ia64;; *) pp_sd_arch_std=unknown;; esac } pp_sd_write_files () { typeset t m o g f p st line dm while read t m o g f p st; do line=" file" case "$f" in *v*) line="$line -v";; esac # FIXME for uninstall case ${pp_sd_os} in 10.*) case $t in f) dm=644;; d) p=${p%/}; dm=755;; esac ;; *) case $t in f) dm=644;; d) line="$line -t d"; p=${p%/}; dm=755;; s) line="$line -t s";; esac ;; esac test x"$o" = x"-" && o=root test x"$g" = x"-" && g=sys test x"$m" = x"-" && m=$dm case $t in s) # swpackage will make unqualified links relative to the # current working (source) directory, not the destination; # we need to qualify them to prevent this. case "$st" in [!/]*) st="`dirname \"$p\"`/$st";; esac echo "$line -o $o -g $g -m $m $st $p" ;; *) echo "$line -o $o -g $g -m $m $pp_destdir$p $p" ;; esac done } pp_sd_service_group_script () { typeset grp svcs scriptpath out grp="$1" svcs="$2" scriptpath="/sbin/init.d/$grp" out="$pp_destdir$scriptpath" pp_add_file_if_missing $scriptpath run 755 || return 0 cat <<-. > $out #!/sbin/sh # generated by pp $pp_version svcs="$svcs" . cat <<-'.' >> $out #-- starts services in order.. stops them all if any break pp_start () { undo= for svc in \$svcs; do /sbin/init.d/\$svc start case \$? in 0|4) undo="\$svc \$undo" ;; *) if test -n "\$undo"; then for svc in \$undo; do /sbin/init.d/\$svc stop done return 1 fi ;; esac done return 0 } #-- stops services in reverse pp_stop () { reverse= for svc in \$svcs; do reverse="\$svc \$reverse" done rc=0 for svc in \$reverse; do /sbin/init.d/\$svc stop || rc=\$? done return \$rc } case \$1 in start_msg) echo "Starting \$svcs";; stop_msg) echo "Stopping \$svcs";; start) pp_start;; stop) pp_stop;; *) echo "usage: \$0 {start|stop|start_msg|stop_msg}" exit 1;; esac . } pp_sd_service_script () { typeset svc config_file config_value scriptpath out svc="$1" scriptpath="/sbin/init.d/$svc" config_file=${pp_sd_config_file:-/etc/rc.config.d/$svc} sd_config_var=`echo run-$svc | tr '[a-z]-' '[A-Z]_'` sd_config_value=${pp_sd_default_start:-0} pp_load_service_vars "$svc" test -n "$user" -a x"$user" != x"root" && cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\"" if test -z "$pidfile"; then pidfile="/var/run/$svc.pid" cmd="$cmd & echo \$! > \$pidfile" fi pp_debug "config file is $config_file" pp_add_file_if_missing $scriptpath run 755 pp_add_file_if_missing $config_file run 644 v cat <<-. >> $pp_destdir$config_file # Controls whether the $svc service is started $sd_config_var=$sd_config_value . if test ! -f $pp_destdir$scriptpath; then cat <<-. > $pp_destdir$scriptpath #!/sbin/sh # generated by pp $pp_version svc="$svc" pidfile="$pidfile" config_file="$config_file" pp_start () { $cmd } pp_disabled () { test \${$sd_config_var:-0} -eq 0 } pp_stop () { if test ! -s "\$pidfile"; then echo "Unable to stop \$svc (no pid file)" return 1 else read pid < "\$pidfile" if kill -0 "\$pid" 2>/dev/null; then if kill -${stop_signal:-TERM} "\$pid"; then rm -f "\$pidfile" return 0 else echo "Unable to stop \$svc" return 1 fi else rm -f "\$pidfile" return 0 fi fi } pp_running () { if test -s "\$pidfile"; then read pid < "\$pidfile" 2>/dev/null if test \${pid:-0} -gt 1 && kill -0 "\$pid" 2>/dev/null; then # make sure command name matches c="\`echo $cmd | sed -e 's: .*::' -e 's:^.*/::'\`" pid="\`ps -p \$pid 2>/dev/null | sed -n \"s/^ *\(\$pid\) .*\$c *\$/\1/p\"\`" if test -n "\$pid"; then return 0 fi fi fi return 1 } case \$1 in start_msg) echo "Starting the \$svc service";; stop_msg) echo "Stopping the \$svc service";; start) if test -f "\$config_file"; then . \$config_file fi if pp_disabled; then exit 2 elif pp_running; then echo "\$svc already running"; exit 0 elif pp_start; then echo "\$svc started"; # rc(1M) says we should exit 4, but nobody expects it! exit 0 else exit 1 fi;; stop) if pp_stop; then echo "\$svc stopped"; exit 0 else exit 1 fi;; *) echo "usage: \$0 {start|stop|start_msg|stop_msg}" exit 1;; esac . fi } pp_sd_make_service () { typeset level startpriority stoppriority startlevels stoplevels typeset svc svcvar symtype svc="$1" svcvar=`pp_makevar $svc` case ${pp_sd_os} in 10.*) symtype="file";; *) symtype="file -t s";; esac # TODO: Figure out why this check is here #-- don't do anything if the script exists #if test -s "$pp_destdir/sbin/init.d/$svc"; then # pp_error "$pp_destdir/sbin/init.d/$svc exists" # return #fi # symlink the script, depending on the priorities chosen eval startpriority='${pp_sd_startpriority_'$svcvar'}' eval stoppriority='${pp_sd_stoppriority_'$svcvar'}' test -z "$startpriority" && startpriority="${pp_sd_startpriority:-50}" test -z "$stoppriority" && stoppriority="${pp_sd_stoppriority:-50}" eval startlevels='${pp_sd_startlevels_'$svcvar'}' test -z "$startlevels" && startlevels="$pp_sd_startlevels" eval stoplevels='${pp_sd_stoplevels_'$svcvar'}' test -z "$stoplevels" && stoplevels="$pp_sd_stoplevels" # create the script and config file pp_sd_service_script $svc # fix the priority up case "$startpriority" in ???) :;; ??) startpriority=0$startpriority;; ?) startpriority=00$startpriority;; esac case "$stoppriority" in ???) :;; ??) stoppriority=0$stoppriority;; ?) stoppriority=00$stoppriority;; esac if test x"$stoplevels" = x"auto"; then stoplevels= test -z "$startlevels" || for level in $startlevels; do stoplevels="$stoplevels `expr $level - 1`" done fi # create the symlinks test -z "$startlevels" || for level in $startlevels; do echo " ${symtype}" \ "/sbin/init.d/$svc" \ "/sbin/rc$level.d/S$startpriority$svc" done test -z "$stoplevels" || for level in $stoplevels; do echo " ${symtype}" \ "/sbin/init.d/$svc" \ "/sbin/rc$level.d/K$stoppriority$svc" done } pp_sd_control () { typeset ctrl script typeset cpt ctrl="$1"; shift cpt="$1"; shift script="$pp_wrkdir/control.$ctrl.$cpt" cat <<. >$script . cat "$@" >> $script echo "exit 0" >> $script /usr/bin/chmod +x $script echo " $ctrl $script" } pp_sd_depend () { typeset _name _vers while read _name _vers; do case "$_name" in ""| "#"*) continue ;; esac echo " prerequisites $_name ${_vers:+r>= $_vers}" done } pp_sd_conflict () { typeset _name _vers while read _name _vers; do case "$_name" in ""| "#"*) continue ;; esac echo " exrequisites $_name ${_vers:+r>= $_vers}" done } pp_backend_sd () { typeset psf cpt svc outfile release swp_flags psf=$pp_wrkdir/psf release="?.${pp_sd_os%.[0-9][0-9]}.*" echo "depot" > $psf echo "layout_version 1.0" >>$psf #-- vendor cat <<. >>$psf vendor tag $pp_sd_vendor_tag title "${pp_sd_vendor:-$vendor}" end product tag $name revision $version vendor_tag $pp_sd_vendor_tag is_patch false title "$summary" copyright "$copyright" machine_type * os_name HP-UX os_release $release os_version ? directory / is_locatable false . test -n "$description" \ && echo $description > $pp_wrkdir/description \ && cat <<. >> $psf description < $pp_wrkdir/description . # make convenience service groups if test -n "$pp_service_groups"; then for grp in $pp_service_groups; do pp_sd_service_group_script \ $grp "`pp_service_get_svc_group $grp`" done fi for cpt in $pp_components; do cat <<. >>$psf fileset tag ${pp_sd_fileset_tag:-$cpt} title "${summary:-cpt}" revision $version . test -s $pp_wrkdir/%depend.$cpt && pp_sd_depend < $pp_wrkdir/%depend.$cpt >> $psf test -s $pp_wrkdir/%conflict.$cpt && pp_sd_conflict < $pp_wrkdir/%conflict.$cpt >> $psf #-- make sure services are shut down during uninstall if test $cpt = run -a -n "$pp_services"; then for svc in $pp_services; do pp_prepend $pp_wrkdir/%preun.$cpt <<-. /sbin/init.d/$svc stop . done fi #-- we put the post/preun code into configure/unconfigure # and not postinstall/preremove, because configure/unconfigure # scripts are run on the hosts where the package is installed, # not loaded (a subtle difference). test -s $pp_wrkdir/%pre.$cpt && pp_sd_control checkinstall $cpt $pp_wrkdir/%pre.$cpt >> $psf test -s $pp_wrkdir/%post.$cpt && pp_sd_control configure $cpt $pp_wrkdir/%post.$cpt >> $psf test -s $pp_wrkdir/%preun.$cpt && pp_sd_control unconfigure $cpt $pp_wrkdir/%preun.$cpt >> $psf test -s $pp_wrkdir/%postun.$cpt && pp_sd_control postremove $cpt $pp_wrkdir/%postun.$cpt >> $psf test -s $pp_wrkdir/%check.$cpt && pp_sd_control checkinstall $cpt $pp_wrkdir/%check.$cpt >> $psf if test $cpt = run -a -n "$pp_services"; then for svc in $pp_services; do #-- service names are 10 chars max on hpux case "$svc" in ???????????*) pp_warn "service name '$svc' is too long for hpux";; esac pp_sd_make_service $svc >> $psf done #pp_sd_make_service_config fi pp_sd_write_files < $pp_wrkdir/%files.$cpt >> $psf #-- end fileset clause cat <<. >>$psf end . done #-- end product clause cat <<. >>$psf end . $pp_opt_debug && cat $psf >&2 test -s $pp_wrkdir/%fixup && . $pp_wrkdir/%fixup outfile=`pp_backend_sd_names` case ${pp_sd_os} in 10.*) swp_flags="-x target_type=tape" ;; *) swp_flags="-x media_type=tape" ;; esac if pp_verbose ${pp_sd_sudo} /usr/sbin/swpackage -s $psf $swp_flags \ @ $pp_wrkdir/$outfile then pp_verbose ${pp_sd_sudo} /usr/sbin/swlist -l file -s $pp_wrkdir/$outfile else pp_error "swpackage failed" fi } pp_backend_sd_cleanup () { : } pp_backend_sd_names () { echo "$name-$version.$pp_sd_arch_std.depot" } pp_backend_sd_install_script () { typeset pkgname platform pkgname=`pp_backend_sd_names` platform="`pp_backend_sd_probe`" echo "#!/bin/sh" pp_install_script_common cat <<. cpt_to_tags () { test x"\$*" = x"all" && set -- $pp_components for cpt do echo "$name.\$cpt" done } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo "$pp_components" ;; list-services) test \$# -eq 0 || usage \$op echo "$pp_services" ;; list-files) test \$# -ge 1 || usage \$op echo \${PP_PKGDESTDIR:-.}/$pkgname ;; install) test \$# -ge 1 || usage \$op verbose /usr/sbin/swinstall -x verbose=0 \ -s \${PP_PKGDESTDIR:-\`pwd\`}/$pkgname \ \`cpt_to_tags "\$@"\` ;; uninstall) test \$# -ge 1 || usage \$op verbose /usr/sbin/swremove -x verbose=0 \ \`cpt_to_tags "\$@"\` ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do verbose /sbin/init.d/\$svc \$op [ \$? -eq 4 -o \$? -eq 0 ] || ec=1 done exit \$ec ;; print-platform) echo "$platform" ;; *) usage ;; esac . } pp_backend_sd_probe () { echo "${pp_sd_os_std}-${pp_sd_arch_std}" } pp_backend_sd_vas_platforms () { case "`pp_backend_sd_probe`" in hpux*-hppa) echo hpux-pa;; hpux*-ia64) echo hpux-ia64 hpux-pa;; *) pp_die "unknown system `pp_backend_sd_probe`";; esac } pp_backend_sd_init_svc_vars () { : } pp_backend_sd_function () { case "$1" in pp_mkgroup) cat <<'.';; /usr/sbin/groupmod "$1" 2>/dev/null || /usr/sbin/groupadd "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat <<'.';; pp_mkgroup "${2:-$1}" || return 1 /usr/sbin/useradd \ -g "${2:-$1}" \ -d "${3:-/nonexistent}" \ -s "${4:-/bin/false}" \ "$1" . pp_havelib) cat <<'.';; for pp_tmp_dir in `echo /usr/lib${3:+:$3} | tr : ' '`; do test -r "$pp_tmp_dir/lib$1${2:+.$2}.sl" && return 0 done return 1 . *) false;; esac } pp_platforms="$pp_platforms solaris" pp_backend_solaris_detect () { test x"$1" = x"SunOS" } pp_backend_solaris_init () { pp_solaris_category= pp_solaris_istates="s S 1 2 3" # run-states when install is ok pp_solaris_rstates="s S 1 2 3" # run-states when remove is ok pp_solaris_maxinst= pp_solaris_vendor= pp_solaris_pstamp= pp_solaris_copyright= pp_solaris_name= pp_solaris_desc= pp_solaris_package_arch=auto pp_solaris_detect_os pp_solaris_detect_arch pp_solaris_init_svc #-- readlink not reliably available on Solaris pp_readlink_fn=pp_ls_readlink } pp_solaris_detect_os () { typeset osrel osrel=`/usr/bin/uname -r` case "$osrel" in 5.[0-6]) pp_solaris_os="sol2${osrel#5.}";; 5.*) pp_solaris_os="sol${osrel#5.}";; esac test -z "$pp_solaris_os" && pp_warn "can't determine OS suffix from uname -r" } pp_solaris_detect_arch () { pp_solaris_arch=`/usr/bin/optisa amd64 sparcv9 i386 sparc` [ -z "$pp_solaris_arch" ] && pp_error "can't determine processor architecture" case "$pp_solaris_arch" in amd64) pp_solaris_arch_std=x86_64;; i386) pp_solaris_arch_std=i386;; sparcv9) pp_solaris_arch_std=sparc64;; sparc) pp_solaris_arch_std=sparc;; *) pp_solaris_arch_std=unknown;; esac } pp_solaris_is_request_script_necessary () { typeset has_optional_services has_optional_services=no for _svc in $pp_services; do pp_load_service_vars $_svc if test "$optional" = "yes"; then has_optional_services=yes fi done # If the package has no optional services and only one component, don't # create a request script at all. if test "$has_optional_services" = "no" && test `echo $pp_components | wc -w` -eq 1; then return 1 # no fi return 0 # yes } pp_solaris_request () { typeset _cmp _svc #-- The common part of the request script contains the ask() function # and resets the CLASSES list to empty cat <<'.' trap 'exit 3' 15 ask () { ans=`ckyorn -d "$1" \ -p "Do you want to $2"` \ || exit $? case "$ans" in y*|Y*) return 0;; *) return 1;; esac } CLASSES= . #-- each of our components adds itself to the CLASSES list for _cmp in $pp_components; do case "$_cmp" in run) :;; doc) echo 'ask y "install the documentation files" &&';; dev) echo 'ask y "install the development files" &&';; dbg) echo 'ask n "install the diagnostic files" &&';; esac echo ' CLASSES="$CLASSES '$_cmp'"' done #-- the request script writes the CLASSES var to its output cat <<'.' echo "CLASSES=$CLASSES" > $1 . if test -n "$pp_services"; then echo 'SERVICES=' for _svc in $pp_services; do pp_load_service_vars $_svc if test "$enable" = "yes"; then _default_prompt=y else _default_prompt=n fi if test "$optional" = "yes"; then echo 'ask '$_default_prompt' "install '$_svc' service" &&' fi echo ' SERVICES="$SERVICES '$_svc'"' done echo 'echo "SERVICES=$SERVICES" >> $1' fi } pp_solaris_procedure () { cat <<. #-- $2 for $1 component of $name case " \$CLASSES " in *" $1 "*) . cat cat <<. ;; esac . } pp_solaris_depend () { typeset _name _vers while read _name _vers; do if test -n "$_name"; then echo "P $_name $_name" test -n "$_vers" && echo " $_vers" fi done } pp_solaris_conflict () { typeset _name _vers while read _name _vers; do if test -n "$_name"; then echo "I $_name $_name" test -n "$_vers" && echo " $_vers" fi done } pp_solaris_space() { echo "$2:$3:$1" >> $pp_wrkdir/space.cumulative } pp_solaris_sum_space () { if test -s $pp_wrkdir/space.cumulative; then sort -t: +2 < $pp_wrkdir/space.cumulative | awk -F: 'NR==1{n=$3}{if($3==n){b+=$1;i+=$2}else{print n" "b" "i;b=$1;i=$2;n=$3}}END{print n" "b" "i}' > $pp_wrkdir/space fi } pp_solaris_proto () { typeset t m o g f p st typeset abi while read t m o g f p st; do # Use Solaris default mode, owner and group if all unspecified if test x"$m$o$g" = x"---"; then m="?"; o="?"; g="?" fi test x"$o" = x"-" && o="root" case "$t" in f) test x"$g" = x"-" && g="bin" test x"$m" = x"-" && m=444 case "$f" in *v*) echo "v $1 $p=$pp_destdir$p $m $o $g";; *) echo "f $1 $p=$pp_destdir$p $m $o $g";; esac if test -r "$pp_destdir$p"; then #-- Use file to record ABI types seen case "`file "$pp_destdir$p"`" in *"ELF 32"*80386*) abi=i386;; *"ELF 64"*AMD*) abi=x86_64;; *"ELF 32"*SPARC*) abi=sparc;; *"ELF 64"*SPARC*) abi=sparc64;; *) abi=;; esac if test -n "$abi"; then pp_add_to_list pp_solaris_abis_seen $abi fi fi ;; d) test x"$g" = x"-" && g="sys" test x"$m" = x"-" && m=555 echo "d $1 $p $m $o $g" ;; s) test x"$g" = x"-" && g="bin" test x"$m" = x"-" && m=777 if test x"$m" != x"777" -a x"$m" != x"?"; then pp_warn "$p: invalid mode $m for symlink, should be 777 or -" fi echo "s $1 $p=$st $m $o $g" ;; esac done } pp_backend_solaris () { typeset _cmp _svc _grp prototype=$pp_wrkdir/prototype : > $prototype pkginfo=$pp_wrkdir/pkginfo : > $pkginfo echo "i pkginfo=$pkginfo" >> $prototype case "${pp_solaris_name:-$name}" in [0-9]*) pp_error "Package name '${pp_solaris_name:-$name}'" \ "cannot start with a number" ;; ???????????????*) pp_warn "Package name '${pp_solaris_name:-$name}'" \ "too long for Solaris 2.6 or 2.7 (max 9 characters)" ;; ??????????*) pp_warn "Package name '${pp_solaris_name:-$name}'" \ "too long for 2.7 Solaris (max 9 characters)" ;; esac #-- generate the package info file echo "VERSION=$version" >> $pkginfo echo "PKG=${pp_solaris_name:-$name}" >> $pkginfo echo "CLASSES=$pp_components" >> $pkginfo echo "BASEDIR=/" >> $pkginfo echo "NAME=$name $version" >> $pkginfo echo "CATEGORY=${pp_solaris_category:-application}" >> $pkginfo desc="${pp_solaris_desc:-$description}" test -n "$desc" && echo "DESC=$desc" >> $pkginfo test -n "$pp_solaris_rstates" && echo "RSTATES=$pp_solaris_rstates" >> $pkginfo test -n "$pp_solaris_istates" && echo "ISTATES=$pp_solaris_istates" >> $pkginfo test -n "$pp_solaris_maxinst" && echo "MAXINST=$pp_solaris_maxinst" >> $pkginfo test -n "${pp_solaris_vendor:-$vendor}" && echo "VENDOR=${pp_solaris_vendor:-$vendor}" >> $pkginfo test -n "$pp_solaris_pstamp" && echo "PSTAMP=$pp_solaris_pstamp" >> $pkginfo if test -n "${pp_solaris_copyright:-$copyright}"; then echo "${pp_solaris_copyright:-$copyright}" > $pp_wrkdir/copyright echo "i copyright=$pp_wrkdir/copyright" >> $prototype fi #-- scripts to run before and after install : > $pp_wrkdir/postinstall : > $pp_wrkdir/preremove : > $pp_wrkdir/postremove for _cmp in $pp_components; do #-- add the preinstall scripts in definition order if test -s $pp_wrkdir/%pre.$_cmp; then pp_solaris_procedure $_cmp preinst < $pp_wrkdir/%pre.$_cmp \ >> $pp_wrkdir/preinstall fi #-- add the postinstall scripts in definition order if test -s $pp_wrkdir/%post.$_cmp; then pp_solaris_procedure $_cmp postinst < $pp_wrkdir/%post.$_cmp \ >> $pp_wrkdir/postinstall fi #-- add the preremove rules in reverse definition order if test -s $pp_wrkdir/%preun.$_cmp; then pp_solaris_procedure $_cmp preremove < $pp_wrkdir/%preun.$_cmp | pp_prepend $pp_wrkdir/preremove fi #-- add the postremove scripts in definition order if test -s $pp_wrkdir/%postun.$_cmp; then pp_solaris_procedure $_cmp postremove < $pp_wrkdir/%postun.$_cmp \ >> $pp_wrkdir/postremove fi #-- Add the check script in definition order if test -s $pp_wrkdir/%check.$_cmp; then pp_solaris_procedure $_cmp checkinstall \ < $pp_wrkdir/%check.$_cmp \ >> $pp_wrkdir/checkinstall fi #-- All dependencies and conflicts are merged together for Solaris pkgs test -s $pp_wrkdir/%depend.$_cmp && pp_solaris_depend < $pp_wrkdir/%depend.$_cmp >> $pp_wrkdir/depend test -s $pp_wrkdir/%conflict.$_cmp && pp_solaris_conflict < $pp_wrkdir/%conflict.$_cmp >> $pp_wrkdir/depend done if pp_solaris_is_request_script_necessary; then pp_solaris_request > $pp_wrkdir/request fi test -n "$pp_services" && for _svc in $pp_services; do pp_load_service_vars $_svc pp_solaris_smf $_svc pp_solaris_make_service $_svc pp_solaris_install_service $_svc | pp_prepend $pp_wrkdir/postinstall pp_solaris_remove_service $_svc | pp_prepend $pp_wrkdir/preremove pp_solaris_remove_service $_svc | pp_prepend $pp_wrkdir/postremove unset pp_svc_xml_file done test -n "$pp_service_groups" && for _grp in $pp_service_groups; do pp_solaris_make_service_group \ $_grp "`pp_service_get_svc_group $_grp`" done #-- if installf was used; we need to indicate a termination grep installf $pp_wrkdir/postinstall >/dev/null && echo 'installf -f $PKGINST' >> $pp_wrkdir/postinstall pp_solaris_sum_space # NB: pkginfo and copyright are added earlier for f in compver depend space checkinstall \ preinstall request postinstall \ preremove postremove; do if test -s $pp_wrkdir/$f; then case $f in *install|*remove|request) # turn scripts into a proper shell scripts mv $pp_wrkdir/$f $pp_wrkdir/$f.tmp { echo "#!/bin/sh"; echo "# $f script for ${pp_solaris_name:-$name}-$version" cat $pp_wrkdir/$f.tmp echo "exit 0"; } > $pp_wrkdir/$f chmod +x $pp_wrkdir/$f rm -f $pp_wrkdir/$f.tmp ;; esac if $pp_opt_debug; then pp_debug "contents of $f:" cat $pp_wrkdir/$f >&2 fi echo "i $f=$pp_wrkdir/$f" >> $prototype fi done #-- create the prototype file which lists the files to install # do this as late as possible because files could be added pp_solaris_abis_seen= for _cmp in $pp_components; do pp_solaris_proto $_cmp < $pp_wrkdir/%files.$_cmp done >> $prototype if test x"$pp_solaris_package_arch" = x"auto"; then if pp_contains "$pp_solaris_abis_seen" sparc64; then pp_solaris_package_arch_std="sparc64" echo "ARCH=sparcv9" >> $pkginfo elif pp_contains "$pp_solaris_abis_seen" sparc; then pp_solaris_package_arch_std="sparc" echo "ARCH=sparc" >> $pkginfo elif pp_contains "$pp_solaris_abis_seen" x86_64; then pp_solaris_package_arch_std="x86_64" echo "ARCH=amd64" >> $pkginfo elif pp_contains "$pp_solaris_abis_seen" i386; then pp_solaris_package_arch_std="i386" echo "ARCH=i386" >> $pkginfo else pp_warn "No ELF files found: not supplying an ARCH type" pp_solaris_package_arch_std="noarch" fi else pp_solaris_package_arch_std="$pp_solaris_package_arch" echo "ARCH=$pp_solaris_package_arch" >> $pkginfo fi mkdir $pp_wrkdir/pkg . $pp_wrkdir/%fixup if $pp_opt_debug; then echo "$pkginfo::"; cat $pkginfo echo "$prototype::"; cat $prototype fi >&2 pkgmk -d $pp_wrkdir/pkg -f $prototype \ || { error "pkgmk failed"; return; } pkgtrans -s $pp_wrkdir/pkg \ $pp_wrkdir/`pp_backend_solaris_names` \ ${pp_solaris_name:-$name} \ || { error "pkgtrans failed"; return; } } pp_backend_solaris_cleanup () { : } pp_backend_solaris_names () { echo ${pp_solaris_name:-$name}-$version-${pp_solaris_package_arch_std:-$pp_solaris_arch}.pkg } pp_backend_solaris_install_script () { typeset pkgname platform platform="${pp_solaris_os:-solaris}-${pp_solaris_package_arch_std:-$pp_solaris_arch}" echo "#! /sbin/sh" pp_install_script_common pkgname=`pp_backend_solaris_names` cat <<. tmpnocheck=/tmp/nocheck\$\$ tmpresponse=/tmp/response\$\$ trap 'rm -f \$tmpnocheck \$tmpresponse' 0 make_tmpfiles () { cat <<-.. > \$tmpresponse CLASSES=\$* SERVICES=$pp_services .. cat <<-.. > \$tmpnocheck mail= instance=overwrite partial=nocheck runlevel=nocheck idepend=nocheck rdepend=nocheck space=nocheck setuid=nocheck conflict=nocheck action=nocheck basedir=default .. } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo "$pp_components" ;; list-services) test \$# -eq 0 || usage \$op echo "$pp_services" ;; list-files) test \$# -ge 1 || usage \$op echo \${PP_PKGDESTDIR:-.}/$pkgname ;; install) test \$# -ge 1 || usage \$op make_tmpfiles "\$@" verbose /usr/sbin/pkgadd -n -d \${PP_PKGDESTDIR:-.}/$pkgname \ -r \$tmpresponse \ -a \$tmpnocheck \ ${pp_solaris_name:-$name} ;; uninstall) test \$# -ge 1 || usage \$op make_tmpfiles "\$@" verbose /usr/sbin/pkgrm -n \ -a \$tmpnocheck \ ${pp_solaris_name:-$name} ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do verbose /etc/init.d/\$svc \$op || ec=1 done exit \$ec ;; print-platform) echo "$platform" ;; *) usage ;; esac . } pp_solaris_dynlib_depend () { xargs ldd 2>/dev/null | sed -e '/^[^ ]*:$/d' -e 's,.*=>[ ]*,,' -e 's,^[ ]*,,' | sort -u | grep -v '^/usr/platform/' | ( set -- ""; shift while read p; do set -- "$@" -p "$p" if [ $# -gt 32 ]; then echo "$# is $#" >&2 pkgchk -l "$@" set -- ""; shift fi done [ $# -gt 0 ] && pkgchk -l "$@" )| awk '/^Current status:/{p=0} p==1 {print $1} /^Referenced by/ {p=1}' | sort -u | xargs -l32 pkginfo -x | awk 'NR % 2 == 1 { name=$1; } NR%2 == 0 { print name, $2 }' } pp_solaris_add_dynlib_depends () { typeset tmp tmp=$pp_wrkdir/tmp.dynlib for _cmp in $pp_components; do awk '{print destdir $6}' destdir="$pp_destdir" \ < $pp_wrkdir/%files.$_cmp | pp_solaris_dynlib_depend > $tmp if test -s $tmp; then cat $tmp >> $pp_wrkdir/%depend.$_cmp fi rm -f $tmp done } pp_backend_solaris_probe () { echo "${pp_solaris_os}-${pp_solaris_arch_std}" } pp_backend_solaris_vas_platforms () { case `pp_backend_solaris_probe` in sol10-sparc* | sol9-sparc* | sol8-sparc*) echo solaris8-sparc solaris7-sparc solaris26-sparc;; sol7-sparc*) echo solaris7-sparc solaris26-sparc;; sol26-sparc*) echo solaris26-sparc;; sol8-*86) echo solaris8-x86;; sol10-*86 | sol10-x86_64) echo solaris10-x64 solaris8-x86;; *) pp_die "unknown system `pp_backend_solaris_probe`";; esac } pp_backend_solaris_function() { case "$1" in pp_mkgroup) cat<<'.';; /usr/sbin/groupmod "$1" 2>/dev/null && return 0 /usr/sbin/groupadd "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat<<'.';; id "$1" >/dev/null 2>/dev/null && return 0 pp_mkgroup "${2:-$1}" || return 1 /usr/sbin/useradd \ -g "${2:-$1}" \ -d "${3:-/nonexistent}" \ -s "${4:-/bin/false}" \ "$1" . *) false;; esac } pp_backend_solaris_init_svc_vars () { _smf_category=${pp_solaris_smf_category:-application} _smf_method_envvar_name=${smf_method_envvar_name:-"PP_SMF_SERVICE"} pp_solaris_service_shell=/sbin/sh } pp_solaris_init_svc () { smf_version=1 smf_type=service solaris_user= solaris_stop_signal= solaris_sysv_init_start=S70 # invocation order for start scripts solaris_sysv_init_kill=K30 # invocation order for kill scripts solaris_sysv_init_start_states="2" # states to install start link solaris_sysv_init_kill_states="S 0 1" # states to install kill link # # To have the service be installed to start automatically, # %service foo # solaris_sysv_init_start_states="S 0 1 2" # } pp_solaris_smf () { typeset f _pp_solaris_service_script svc _pp_solaris_manpage pp_solaris_name=${pp_solaris_name:-$name} pp_solaris_manpath=${pp_solaris_manpath:-"/usr/share/man"} pp_solaris_mansect=${pp_solaris_mansect:-1} smf_start_timeout=${smf_start_timeout:-60} smf_stop_timeout=${smf_stop_timeout:-60} smf_restart_timeout=${smf_restart_timeout:-60} svc=${pp_solaris_smf_service_name:-$1} _pp_solaris_service_script=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"} _pp_solaris_manpage=${pp_solaris_manpage:-$svc} if [ -z $pp_svc_xml_file ]; then pp_svc_xml_file="/var/svc/manifest/$_smf_category/$svc.xml" echo "## Generating the smf service manifest file for $pp_svc_xml_file" else echo "## SMF service manifest file already defined at $pp_svc_xml_file" if [ -z $pp_solaris_smf_service_name ] || [ -z $pp_solaris_smf_category ] || [ -z $pp_solaris_service_script ] || [ -z $smf_method_envvar_name ]; then pp_error "All required variables are not set.\n"\ "When using a custom manifest file all of the following variables must be set:\n"\ "pp_solaris_smf_service_name, pp_solaris_smf_category, pp_solaris_service_script and smf_method_envvar_name.\n\n"\ "Example:\n"\ " \$pp_solaris_smf_category=application\n"\ " \$pp_solaris_smf_service_name=pp\n\n"\ " \n\n"\ "Example:\n"\ " \$pp_solaris_service_script=/etc/init.d/pp\n\n"\ " \n\n"\ "Example:\n"\ " \$smf_method_envvar_name=PP_SMF_SERVICE\n\n"\ " \n"\ " \n"\ " \n" return 1 fi return 0 fi f=$pp_svc_xml_file pp_add_file_if_missing $f || return 0 pp_solaris_add_parent_dirs "$f" _pp_solaris_smf_dependencies=" " _pp_solaris_smf_dependencies=${pp_solaris_smf_dependencies:-$_pp_solaris_smf_dependencies} cat <<-. >$pp_destdir$f $_pp_solaris_smf_dependencies $pp_solaris_smf_additional_dependencies $pp_solaris_smf_property_groups . } pp_solaris_make_service_group () { typeset group out file svcs svc group="$1" svcs="$2" file="/etc/init.d/$group" out="$pp_destdir$file" #-- return if the script is supplied already pp_add_file_if_missing "$file" run 755 || return 0 pp_solaris_add_parent_dirs "$file" echo "#! /sbin/sh" > $out echo "# polypkg service group script for these services:" >> $out echo "svcs=\"$svcs\"" >> $out cat <<'.' >>$out #-- starts services in order.. stops them all if any break pp_start () { undo= for svc in $svcs; do if /etc/init.d/$svc start; then undo="$svc $undo" else if test -n "$undo"; then for svc in $undo; do /etc/init.d/$svc stop done return 1 fi fi done return 0 } #-- stops services in reverse pp_stop () { reverse= for svc in $svcs; do reverse="$svc $reverse" done rc=0 for svc in $reverse; do /etc/init.d/$svc stop || rc=$? done return $rc } #-- returns true only if all services return true status pp_status () { rc=0 for svc in $svcs; do /etc/init.d/$svc status || rc=$? done return $rc } case "$1" in start) pp_start;; stop) pp_stop;; status) pp_status;; restart) pp_stop && pp_start;; *) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;; esac . } pp_solaris_make_service () { typeset file out svc svc="${pp_solaris_smf_service_name:-$1}" file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"} out="$pp_destdir$file" #-- return if we don't need to create the init script pp_add_file_if_missing "$file" run 755 || return 0 pp_solaris_add_parent_dirs "$file" echo "#! /sbin/sh" >$out echo "#-- This service init file generated by polypkg" >>$out #-- Start SMF integration. if [ -n "$pp_svc_xml_file" ] ; then cat <<_EOF >>$out if [ -x /usr/sbin/svcadm ] && [ "x\$1" != "xstatus" ] && [ "t\$$_smf_method_envvar_name" = "t" ] ; then case "\$1" in start) echo "starting $svc" /usr/sbin/svcadm clear svc:/$_smf_category/$svc:default >/dev/null 2>&1 /usr/sbin/svcadm enable -s $_smf_category/$svc RESULT=\$? if [ "\$RESULT" -ne 0 ] ; then echo "Error \$RESULT starting $svc" >&2 fi ;; stop) echo "stopping $svc" /usr/sbin/svcadm disable -ts $_smf_category/$svc RESULT=0 ;; restart) echo "restarting $svc" /usr/sbin/svcadm disable -ts $_smf_category/$svc /usr/sbin/svcadm clear svc:/$_smf_category/$svc:default >/dev/null 2>&1 /usr/sbin/svcadm enable -s $_smf_category/$svc RESULT=\$? if [ "\$RESULT" -ne 0 ] ; then echo "Error \$RESULT starting $svc" >&2 fi ;; *) echo "Usage: $file {start|stop|restart|status}" >&2 RESULT=1 esac exit $RESULT fi _EOF fi #-- Construct a start command that builds a pid file as needed # and forks the daemon. Services started by smf may not fork. if test -z "$pidfile"; then # The service does not define a pidfile, so we have to make # our own up. On Solaris systems where there is no /var/run # we must use /tmp to guarantee the pid files are removed after # a system crash. if test -z "$pp_piddir"; then pp_piddir="/var/run" fi cat <<. >>$out pp_isdaemon=0 pp_piddirs="${pp_piddir}${pp_piddir+ }/var/run /tmp" for pp_piddir in \$pp_piddirs; do test -d "\$pp_piddir/." && break done pidfile="\$pp_piddir/$svc.pid" . else # The service is able to write its own PID file cat <<. >>$out pp_isdaemon=1 pidfile="$pidfile" . fi pp_su= if test "${user:-root}" != "root"; then pp_su="su $user -c exec " fi cat <<. >>$out stop_signal="${stop_signal:-TERM}" svc="${svc}" # generated command to run $svc as a service pp_exec () { if [ \$pp_isdaemon -ne 1 ]; then if [ "t\$PP_SMF_SERVICE" = "t" ]; then ${pp_su}$cmd & echo \$! > \$pidfile else echo "via exec." echo \$$ > \$pidfile exec ${pp_su}$cmd return 1 fi else ${pp_su}$cmd fi } . #-- write the invariant section of the init script cat <<'.' >>$out # returns true if $svc is running pp_running () { if test -s "$pidfile"; then read pid < "$pidfile" 2>/dev/null if test ${pid:-0} -gt 1 && kill -0 "$pid" 2>/dev/null; then # make sure command name matches up to the first 8 chars c="`echo $cmd | sed -e 's: .*::' -e 's:^.*/::' -e 's/^\(........\).*$/\1/'`" pid="`ps -p $pid 2>/dev/null | sed -n \"s/^ *\($pid\) .*$c *$/\1/p\"`" if test -n "$pid"; then return 0 fi fi fi return 1 } # prints a message describing $svc's running state pp_status () { if pp_running; then echo "service $svc is running (pid $pid)" return 0 elif test -f "$pidfile"; then echo "service $svc is not running, but pid file exists" return 2 else echo "service $svc is not running" return 1 fi } # starts $svc pp_start () { if pp_running; then echo "service $svc already running" >&2 return 0 fi echo "starting $svc... \c" if pp_exec; then echo "done." else echo "ERROR." exit 1 fi } # stops $svc pp_stop () { if pp_running; then echo "stopping $svc... \c" if kill -$stop_signal $pid; then rm -f "$pidfile" echo "done." else echo "ERROR." return 1 fi else echo "service $svc already stopped" >&2 return 0 fi } umask 022 case "$1" in start) pp_start;; stop) pp_stop;; status) pp_status;; restart) pp_stop && pp_start;; *) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;; esac . } pp_solaris_remove_service () { typeset file svc svc="${pp_solaris_smf_service_name:-$1}" file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"} echo ' if [ "x${PKG_INSTALL_ROOT}" = 'x' ]; then if [ -x /usr/sbin/svcadm ] ; then /usr/sbin/svcadm disable -s '$svc' 2>/dev/null if [ `uname -r` = 5.10 ] || [ "'${pp_svc_xml_file%/*/*}'" != "/var/svc/manifest" ]; then /usr/sbin/svccfg delete '$svc' 2>/dev/null else /usr/sbin/svcadm restart manifest-import 2>/dev/null fi else '$file' stop >/dev/null 2>/dev/null fi fi ' } pp_solaris_install_service () { typeset s k l file svc svc="${pp_solaris_smf_service_name:-$1}" file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"} s="${solaris_sysv_init_start}$svc" k="${solaris_sysv_init_kill}$svc" echo ' if [ "x${PKG_INSTALL_ROOT}" != "x" ]; then if [ -x ${PKG_INSTALL_ROOT}/usr/sbin/svcadm ]; then if [ `uname -r` = 5.10 ] || [ "'${pp_svc_xml_file%/*/*}'" != "/var/svc/manifest" ]; then echo "/usr/sbin/svccfg import '$pp_svc_xml_file' 2>/dev/null" >> ${PKG_INSTALL_ROOT}/var/svc/profile/upgrade else echo "/usr/sbin/svcadm restart manifest-import 2>/dev/null" >> ${PKG_INSTALL_ROOT}/var/svc/profile/upgrade fi else' test -n "${solaris_sysv_init_start_states}" && for state in ${solaris_sysv_init_start_states}; do l="/etc/rc$state.d/$s" echo "echo '$l'" echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s" pp_solaris_space /etc/rc$state.d 0 1 done test -n "${solaris_sysv_init_kill_states}" && for state in ${solaris_sysv_init_kill_states}; do l="/etc/rc$state.d/$k" echo "echo '$l'" echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s" pp_solaris_space /etc/rc$state.d 0 1 done echo ' fi else if [ -x /usr/sbin/svcadm ]; then echo "Registering '$svc' with SMF" /usr/sbin/svcadm disable -s '$svc' 2>/dev/null if [ `uname -r` = 5.10 ] || [ "'${pp_svc_xml_file%/*/*}'" != "/var/svc/manifest" ]; then /usr/sbin/svccfg delete '$svc' 2>/dev/null /usr/sbin/svccfg import '$pp_svc_xml_file' else /usr/sbin/svcadm restart manifest-import # Wait for import to complete, otherwise it will not know # about our service until after we try to start it echo Waiting for manifest-import... typeset waited waited=0 while [ $waited -lt 15 ] && ! /usr/bin/svcs -l '$svc' >/dev/null 2>&1; do sleep 1 waited=`expr $waited + 1` done if /usr/bin/svcs -l '$svc' >/dev/null 2>&1; then echo OK else echo manifest-import took to long, you might have to control '$svc' manually. fi fi else' test -n "${solaris_sysv_init_start_states}" && for state in ${solaris_sysv_init_start_states}; do l="/etc/rc$state.d/$s" echo "echo '$l'" echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s" pp_solaris_space /etc/rc$state.d 0 1 done test -n "${solaris_sysv_init_kill_states}" && for state in ${solaris_sysv_init_kill_states}; do l="/etc/rc$state.d/$k" echo "echo '$l'" echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=$file s" pp_solaris_space /etc/rc$state.d 0 1 done echo ' fi fi' } pp_solaris_add_parent_dirs () { typeset dir dir=${1%/*} while test -n "$dir"; do if awk "\$6 == \"$dir/\" {exit 1}" < $pp_wrkdir/%files.run; then echo "d - - - - $dir/" >> $pp_wrkdir/%files.run fi dir=${dir%/*} done } pp_platforms="$pp_platforms deb" pp_backend_deb_detect () { test -f /etc/debian_version } pp_deb_cmp_full_name () { local prefix prefix="${pp_deb_name:-$name}" case "$1" in run) echo "${prefix}" ;; dbg) echo "${prefix}-${pp_deb_dbg_pkgname}";; dev) echo "${prefix}-${pp_deb_dev_pkgname}";; doc) echo "${prefix}-${pp_deb_doc_pkgname}";; *) pp_error "unknown component '$1'"; esac } pp_backend_deb_init () { pp_deb_dpkg_version="2.0" pp_deb_name= pp_deb_version= pp_deb_release= pp_deb_arch= pp_deb_arch_std= pp_deb_maintainer="One Identity LLC " pp_deb_copyright= pp_deb_distro= pp_deb_control_description= pp_deb_summary= pp_deb_description= pp_deb_dbg_pkgname="dbg" pp_deb_dev_pkgname="dev" pp_deb_doc_pkgname="doc" pp_deb_section=contrib # Free software that depends on non-free software # Detect the host architecture pp_deb_detect_arch # Make sure any programs we require are installed pp_deb_check_required_programs } pp_deb_check_required_programs () { local p needed notfound ok needed= notfound= for prog in dpkg dpkg-deb install md5sum fakeroot do if which $prog 2>/dev/null >/dev/null; then pp_debug "$prog: found" else pp_debug "$prog: not found" case "$prog" in dpkg|dpkg-deb) p=dpkg;; install|md5sum) p=coreutils;; fakeroot) p=fakeroot;; *) pp_die "unexpected dpkg tool $prog";; esac notfound="$notfound $prog" pp_contains "$needed" "$p" || needed="$needed $p" fi done if [ -n "$notfound" ]; then pp_error "cannot find these programs: $notfound" pp_error "please install these packages: $needed" fi } pp_deb_munge_description () { # Insert a leading space on each line, replace blank lines with a #space followed by a full-stop. pp_deb_control_description="`echo ${pp_deb_description:-$description} | \ sed 's,^\(.*\)$, \1, ' | sed 's,^[ \t]*$, .,g' | fmt -w 80`" } pp_deb_detect_arch () { pp_deb_arch=`dpkg-architecture -qDEB_HOST_ARCH` pp_deb_arch_std=`uname -m` } pp_deb_sanitize_version() { echo "$@" | tr -d -c '[:alnum:].+-:~' } pp_deb_version_final() { if test -n "$pp_deb_version"; then # Don't sanitize; assume the user is sane (hah!) echo "$pp_deb_version" else pp_deb_sanitize_version "$version" fi } pp_deb_conflict () { local _name _vers _conflicts _conflicts="Conflicts:" while read _name _vers; do case "$_name" in ""| "#"*) continue ;; esac _conflicts="$_conflicts $_name" test -n "$_vers" && _conflicts="$_conflicts $_name (>= $vers)" _conflicts="${_conflicts}," done echo "${_conflicts%,}" } pp_deb_make_control() { local cmp="$1" local installed_size # compute the installed size installed_size=`pp_deb_files_size < $pp_wrkdir/%files.$cmp` package_name=`pp_deb_cmp_full_name "$cmp"` cat <<-. Package: ${package_name} Version: `pp_deb_version_final`-${pp_deb_release:-1} Section: ${pp_deb_section:-contrib} Priority: optional Architecture: ${pp_deb_arch} Maintainer: ${pp_deb_maintainer:-$maintainer} Description: ${pp_deb_summary:-$summary} ${pp_deb_control_description} Installed-Size: ${installed_size} . if test -s $pp_wrkdir/%depend."$cmp"; then sed -ne '/^[ ]*$/!s/^[ ]*/Depends: /p' \ < $pp_wrkdir/%depend."$cmp" fi if test -s $pp_wrkdir/%conflict."$cmp"; then pp_deb_conflict < $pp_wrkdir/%conflict."$cmp" fi } pp_deb_make_md5sums() { local cmp="$1"; shift local pkg_dir pkg_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp` (cd $pkg_dir && md5sum "$@") > $pkg_dir/DEBIAN/md5sums || pp_error "cannot make md5sums" } pp_deb_make_package_maintainer_script() { local output="$1" local source="$2" local desc="$3" # See if we need to create this script at all if [ -s "$source" ] then # Create header cat <<-. >$output || pp_error "Cannot create $output" #!/bin/sh # $desc # Generated by PolyPackage $pp_version . cat $source >> "$output" || pp_error "Cannot append to $output" # Set perms chmod 755 "$output" || pp_error "Cannot chmod $output" fi } pp_deb_handle_services() { local svc #-- add service start/stop code if test -n "$pp_services"; then #-- append common %post install code pp_systemd_service_install_common >> $pp_wrkdir/%post.run #-- record the uninstall commands in reverse order for svc in $pp_services; do pp_load_service_vars $svc # Create init script and systemd service file (unless they exists) pp_deb_service_make_service_files $svc || pp_error "could not create service files for $svc" #-- append %post code to install the svc test x"yes" = x"$enable" && cat<<-. >> $pp_wrkdir/%post.run case "\$1" in configure) # Install the service links _pp_systemd_init if test -n "\$systemctl_cmd"; then _pp_systemd_install $svc _pp_systemd_enable $svc else update-rc.d $svc defaults fi ;; esac . #-- prepend %preun code to stop svc cat<<-. | pp_prepend $pp_wrkdir/%preun.run case "\$1" in remove|deconfigure|upgrade) # Stop the $svc service invoke-rc.d $svc stop _pp_systemd_disable $svc ;; esac . #-- prepend %postun code to remove service cat<<-. | pp_prepend $pp_wrkdir/%postun.run case "\$1" in purge) # Remove the service links update-rc.d $svc remove _pp_systemd_remove $svc ;; esac . done pp_systemd_service_remove_common | pp_prepend $pp_wrkdir/%preun.run #pp_deb_service_remove_common | pp_prepend $pp_wrkdir/%preun.run # Actual systemd service removal is done in %postun. # Otherwise, systemd may pick up the init.d script if it exists. pp_systemd_service_remove_common | pp_prepend $pp_wrkdir/%postun.run fi } pp_deb_fakeroot () { if test -s $pp_wrkdir/fakeroot.save; then fakeroot -i $pp_wrkdir/fakeroot.save -s $pp_wrkdir/fakeroot.save "$@" else fakeroot -s $pp_wrkdir/fakeroot.save "$@" fi } pp_deb_files_size () { local t m o g f p st while read t m o g f p st; do case $t in f|s) du -k "${pp_destdir}$p";; d) echo 4;; esac done | awk '{n+=$1} END {print n}' } pp_deb_make_DEBIAN() { local cmp="${1:-run}" local data cmp_full_name local old_umask old_umask=`umask` umask 0022 cmp_full_name=`pp_deb_cmp_full_name $cmp` data=$pp_wrkdir/$cmp_full_name # Create DEBIAN dir $data/DEBIAN mkdir -p $data/DEBIAN # Create control file pp_deb_make_control $cmp > $data/DEBIAN/control # Copy in conffiles if test -f $pp_wrkdir/%conffiles.$cmp; then cp $pp_wrkdir/%conffiles.$cmp $data/DEBIAN/conffiles fi # Create preinst pp_deb_make_package_maintainer_script "$data/DEBIAN/preinst" \ "$pp_wrkdir/%pre.$cmp" "Pre-install script for $cmp_full_name"\ || exit $? # Create postinst pp_deb_make_package_maintainer_script "$data/DEBIAN/postinst" \ "$pp_wrkdir/%post.$cmp" "Post-install script for $cmp_full_name"\ || exit $? # Create prerm pp_deb_make_package_maintainer_script "$data/DEBIAN/prerm" \ "$pp_wrkdir/%preun.$cmp" "Pre-uninstall script for $cmp_full_name"\ || exit $? # Create postrm pp_deb_make_package_maintainer_script "$data/DEBIAN/postrm" \ "$pp_wrkdir/%postun.$cmp" "Post-uninstall script for $cmp_full_name"\ || exit $? umask $old_umask } pp_deb_make_data() { local _l t m o g f p st data local data share_doc owner group cmp=$1 data=$pp_wrkdir/`pp_deb_cmp_full_name $cmp` cat $pp_wrkdir/%files.${cmp} | while read t m o g f p st; do if test x"$m" = x"-"; then case "$t" in d) m=755;; f) m=644;; esac fi test x"$o" = x"-" && o=root test x"$g" = x"-" && g=root case "$t" in f) # Files pp_deb_fakeroot install -D -o $o -g $g -m ${m} $pp_destdir/$p $data/$p; if [ x"$f" = x"v" ] then # File marked as "volatile". Assume this means it's a conffile # TODO: check this as admins like modified conffiles to be left # behind echo "$p" >> $pp_wrkdir/%conffiles.$cmp fi;; d) # Directories pp_deb_fakeroot install -m ${m} -o $o -g $g -d $data/$p;; s) # Symlinks # Remove leading / from vars rel_p=`echo $p | sed s,^/,,` rel_st=`echo $st | sed s,^/,,` # TODO: we are always doing absolute links here. We should follow # the debian policy of relative links when in the same top-level # directory (cd $data; ln -sf $st $rel_p);; *) pp_error "Unsupported data file type: $t";; esac done # If no copyright file is present add one. This is a debian requirement. share_doc="/usr/share/doc/`pp_deb_cmp_full_name $cmp`" if [ ! -f "$data/$share_doc/copyright" ] then echo "${pp_deb_copyright:-$copyright}" > "$pp_wrkdir/copyright" install -D -m 644 "$pp_wrkdir/copyright" "$data/$share_doc/copyright" fi } pp_deb_makedeb () { local cmp local package_build_dir cmp="$1" package_build_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp` # Create package dir mkdir -p $package_build_dir # Copy in data pp_deb_make_data $cmp || pp_die "Could not make DEBIAN data files for $cmp" # Make control files # must be done after copying data so conffiles are found pp_deb_make_DEBIAN $cmp || pp_die "Could not make DEBIAN control files for $cmp" # Create md5sums pp_deb_make_md5sums $cmp `(cd $package_build_dir; find . -name DEBIAN -prune -o -type f -print | sed "s,^\./,,")` || pp_die "Could not make DEBIAN md5sums for $cmp" } pp_backend_deb () { local debname # Munge description for control file inclusion pp_deb_munge_description # Handle services pp_deb_handle_services $cmp for cmp in $pp_components do debname=`pp_deb_name $cmp` pp_deb_makedeb $cmp done . $pp_wrkdir/%fixup for cmp in $pp_components do debname=`pp_deb_name $cmp` # Create debian package pp_debug "Building `pp_deb_cmp_full_name $cmp` -> $output" pp_deb_fakeroot dpkg-deb \ --build $pp_wrkdir/`pp_deb_cmp_full_name $cmp` \ $pp_wrkdir/$debname || pp_error "failed to create $cmp package" done } pp_backend_deb_cleanup () { # rm -rf $pp_wrkdir : } pp_deb_name () { local cmp="${1:-run}" echo `pp_deb_cmp_full_name $cmp`"_"`pp_deb_version_final`"-${pp_deb_release:-1}_${pp_deb_arch}.deb" } pp_backend_deb_names () { for cmp in $pp_components do pp_deb_name $cmp done } pp_backend_deb_install_script () { local cmp _cmp_full_name echo "#!/bin/sh" pp_install_script_common cat <<. cmp_to_pkgname () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo "$cmp) echo '`pp_deb_cmp_full_name $cmp`';;" done cat <<. *) usage;; esac done } cmp_to_pathname () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo "$cmp) echo \${PP_PKGDESTDIR:-.}/'`pp_deb_name $cmp`';;" done cat <<. *) usage;; esac done } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo $pp_components ;; list-services) test \$# -eq 0 || usage \$op echo $pp_services ;; list-files) test \$# -ge 1 || usage \$op cmp_to_pathname "\$@" ;; install) test \$# -ge 1 || usage \$op dpkg --install \`cmp_to_pathname "\$@"\` ;; uninstall) test \$# -ge 1 || usage \$op dpkg --remove \`cmp_to_pkgname "\$@"\`; : ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do /etc/init.d/\$svc \$op || ec=1 done exit \$ec ;; print-platform) test \$# -eq 0 || usage \$op echo "linux-${pp_deb_arch}" ;; *) usage ;; esac . } pp_backend_deb_probe() { local arch distro release pp_deb_detect_arch # /etc/debian_version exists on Debian & Ubuntu, so it's no use # to us. Use lsb_release instead. case `(lsb_release -is || echo no-lsb) 2>/dev/null` in Debian) distro=deb ;; Ubuntu) distro=ubu ;; no-lsb) echo unknown-$pp_deb_arch_std return 0 ;; *) distro=unknown ;; esac release=`lsb_release -rs` # If release is not numeric, use the codename case $release in *[!.0-9r]*) release=`lsb_release -cs` case $release in buzz) release="11" ;; rex) release="12" ;; bo) release="13" ;; hamm) release="20" ;; slink) release="21" ;; potato) release="22" ;; woody) release="30" ;; sarge) release="31" ;; etch) release="40" ;; lenny) release="50" ;; squeeze) release="60" ;; wheezy) release="70" ;; jessie) release="80" ;; stretch) release="90" ;; esac ;; *) # Remove trailing revision number and any dots release=`echo $release | cut -dr -f1 | tr -d .` ;; esac echo $distro$release-$pp_deb_arch_std } pp_backend_deb_vas_platforms () { case "$pp_deb_arch_std" in x86_64) echo "linux-x86_64.deb";; # DO NOT add linux-x86.deb here!! *86) echo "linux-x86.deb";; *) pp_die "unknown architecture ${pp_deb_arch_std}";; esac } pp_backend_deb_init_svc_vars () { reload_signal= start_runlevels=${pp_deb_default_start_runlevels-"2 3 4 5"} # == lsb default-start stop_runlevels=${pp_deb_default_stop_runlevels-"0 1 6"} # == lsb default-stop svc_description="${pp_deb_default_svc_description}" # == lsb short descr svc_process= svc_init_filename="${pp_deb_svc_init_filename}" # == $svc.init svc_init_filepath="${pp_deb_svc_init_filepath}" # == /etc/init.d/ by default lsb_required_start='$local_fs $network' lsb_should_start= lsb_required_stop='$local_fs' lsb_description= start_priority=50 stop_priority=50 #-- stop_priority = 100 - start_priority } pp_deb_service_make_service_files () { local svc=${svc_init_filename:-$1} local script="${svc_init_filepath:-"/etc/init.d"}/$svc" local out=$pp_destdir$script local _process _cmd pp_add_file_if_missing $script run 755 v || return 0 #-- start out as an empty shell script cat <<-'.' >$out #!/bin/sh . #-- determine the process name from $cmd unless $svc_process is given set -- $cmd #_process=${svc_process:-"$1"} --? WTF #-- construct a start command that builds a pid file if needed #-- the command name in /proc/[pid]/stat is limited to 15 characters _cmd="$cmd"; _cmd_path=`echo $cmd | cut -d" " -f1` _cmd_name=`basename $_cmd_path | cut -c1-15` _cmd_args=`echo $cmd | cut -d" " -f2-` test x"$_cmd_path" != x"$_cmd_args" || _cmd_args= #-- generate the LSB init info cat <<-. >>$out ### BEGIN INIT INFO # Provides: ${svc} # Required-Start: ${lsb_required_start} # Should-Start: ${lsb_should_start} # Required-Stop: ${lsb_required_stop} # Default-Start: ${start_runlevels} # Default-Stop: ${stop_runlevels} # Short-Description: ${svc_description:-no description} ### END INIT INFO # Generated by PolyPackage ${pp_version} # ${copyright} . if test x"${svc_description}" = x"${pp_deb_default_svc_description}"; then svc_description= fi #-- write service-specific definitions cat <<. >>$out NAME="${_cmd_name}" DESC="${svc_description:-$svc service}" USER="${user}" GROUP="${group}" PIDFILE="${pidfile}" STOP_SIGNAL="${stop_signal}" RELOAD_SIGNAL="${reload_signal}" CMD="${_cmd}" DAEMON="${_cmd_path}" DAEMON_ARGS="${_cmd_args}" SCRIPTNAME=${script} . #-- write the generic part of the init script cat <<'.' >>$out [ -x "$DAEMON" ] || exit 0 [ -r /etc/default/$NAME ] && . /etc/default/$NAME [ -f /etc/default/rcS ] && . /etc/default/rcS . /lib/lsb/init-functions do_start() { # Return # 0 if daemon has been started # 1 if daemon was already running # 2 if daemon could not be started if [ -n "$PIDFILE" ] then pidfile_opt="--pidfile $PIDFILE" else pidfile_opt="--make-pidfile --background --pidfile /var/run/$NAME.pid" fi if [ -n "$USER" ] then user_opt="--user $USER" fi if [ -n "$GROUP" ] then group_opt="--group $GROUP" fi start-stop-daemon --start --quiet $pidfile_opt $user_opt --exec $DAEMON --test > /dev/null \ || return 1 # Note: there seems to be no way to tell whether the daemon will fork itself or not, so pass # --background for now start-stop-daemon --start --quiet $pidfile_opt $user_opt --exec $DAEMON -- \ $DAEMON_ARGS \ || return 2 } do_stop() { # Return # 0 if daemon has been stopped # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred if [ -n "$PIDFILE" ] then pidfile_opt="--pidfile $PIDFILE" else pidfile_opt="--pidfile /var/run/$NAME.pid" fi if [ -n "$USER" ] then user_opt="--user $USER" fi if [ -n $STOP_SIGNAL ] then signal_opt="--signal $STOP_SIGNAL" fi start-stop-daemon --stop --quiet $signal_opt --retry=TERM/30/KILL/5 $pidfile_opt --name $NAME RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks # and if the daemon is only ever run from this initscript. # If the above conditions are not satisfied then add some other code # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. test -z $PIDFILE || rm -f $PIDFILE return "$RETVAL" } do_reload() { # # If the daemon can reload its configuration without # restarting (for example, when it is sent a SIGHUP), # then implement that here. # if [ -n "$PIDFILE" ] then pidfile_opt="--pidfile $PIDFILE" else pidfile_opt="--pidfile /var/run/$NAME.pid" fi if [ -n "$RELOAD_SIGNAL" ] then start-stop-daemon --stop --signal $RELOAD_SIGNAL --quiet $pidfile_opt --name $NAME fi return 0 } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" do_start case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" do_stop case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; reload|force-reload) if [ -n "$RELOAD_SIGNAL" ] then log_daemon_msg "Reloading $DESC" "$NAME" do_reload log_end_msg $? else # Do a restart instead "$0" restart fi ;; restart) # # If the "reload" option is implemented then remove the # 'force-reload' alias # log_daemon_msg "Restarting $DESC" "$NAME" do_stop case "$?" in 0|1) do_start case "$?" in 0) log_end_msg 0 ;; 1) log_end_msg 1 ;; # Old process is still running *) log_end_msg 1 ;; # Failed to start esac ;; *) # Failed to stop log_end_msg 1 ;; esac ;; *) #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2 exit 3 ;; esac : . chmod 755 $out # Create systemd service file pp_systemd_make_service_file $svc } pp_backend_deb_function() { case "$1" in pp_mkgroup) cat<<'.';; /usr/sbin/groupmod "$1" 2>/dev/null && return 0 /usr/sbin/groupadd "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat<<'.';; pp_tmp_system= id -u "$1" >/dev/null 2>/dev/null && return 0 # deb 3.1's useradd changed API in 4.0. Gah! /usr/sbin/useradd --help 2>&1 | /bin/grep -q .--system && pp_tmp_system=--system pp_mkgroup "${2:-$1}" || return 1 /usr/sbin/useradd \ -g "${2:-$1}" \ -d "${3:-/nonexistent}" \ -s "${4:-/bin/false}" \ $pp_tmp_system \ "$1" . pp_havelib) cat<<'.';; for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0 done return 1 . *) false;; esac } pp_platforms="$pp_platforms kit" pp_backend_kit_detect () { test x"$1" = x"OSF1" } pp_backend_kit_init () { pp_kit_name= pp_kit_package= pp_kit_desc= pp_kit_version= pp_kit_subset= pp_readlink_fn=pp_ls_readlink pp_kit_startlevels="2 3" pp_kit_stoplevels="0 2 3" } pp_backend_kit () { typeset mi_file k_file svc outfile typeset desc pp_backend_kit_names > /dev/null if test -z "$pp_kit_desc"; then pp_kit_desc="$description" fi mi_file="$pp_wrkdir/$pp_kit_subset.mi" k_file="$pp_wrkdir/$pp_kit_subset.k" scp_file="$pp_wrkdir/$pp_kit_subset.scp" desc="${pp_kit_desc:-$description}" cat <<-. >> $k_file NAME='$name' CODE=$pp_kit_name VERS=$pp_kit_version MI=$mi_file COMPRESS=0 %% $pp_kit_subset . 0 '$desc' . if test -n "$pp_services"; then for svc in $pp_services; do pp_kit_make_service $svc pp_prepend $pp_wrkdir/%preun.run <<-. /sbin/init.d/$svc stop . done fi pp_backend_kit_make_mi "$mi_file" pp_backend_kit_make_scp #rm -rf $pp_wrkdir/kit_dest mkdir -p $pp_wrkdir/kit_dest pp_backend_kit_kits $k_file $pp_opt_destdir $pp_wrkdir/kit_dest tar cvf $pp_wrkdir/$pp_kit_subset.tar -C $pp_wrkdir/kit_dest . gzip -c $pp_wrkdir/$pp_kit_subset.tar > $pp_wrkdir/$pp_kit_subset.tar.gz #rm -rf $pp_wrkdir/$pp_kit_subset.tar $pp_wrkdir/scps } pp_backend_kit_make_mi () { # XXX this information should go into the .inv files typeset t m o g f p st line dm while read t m o g f p st; do case $t in f|d) echo "0 .$p $pp_kit_subset" echo " chmod $m $p" >> $pp_wrkdir/%post.run if [ x"$o" = x"-" ] ; then echo " chown root $p" >> $pp_wrkdir/%post.run else echo " chown $o $p" >> $pp_wrkdir/%post.run fi if [ x"$g" = x"-" ] ; then echo " chgrp 0 $p" >> $pp_wrkdir/%post.run else echo " chgrp $g $p" >> $pp_wrkdir/%post.run fi ;; s) echo " ln -s $st $p" >> $pp_wrkdir/%post.run echo " rm -f $p" >> $pp_wrkdir/%preun.run ;; esac done < $pp_wrkdir/%files.run | sort -k3 |uniq > $1 } pp_backend_kit_make_scp () { scpdir="$pp_wrkdir/scps" mkdir "$scpdir" && touch "$scpdir"/$pp_kit_subset.scp cat <"$scpdir"/$pp_kit_subset.scp . /usr/share/lib/shell/libscp case "\$ACT" in PRE_L) STL_ScpInit ;; POST_L) STL_ScpInit STL_LinkCreate EOF cat $pp_wrkdir/%post.run >>"$scpdir"/$pp_kit_subset.scp cat >>"$scpdir"/$pp_kit_subset.scp <>"$scpdir"/$pp_kit_subset.scp cat >>"$scpdir"/$pp_kit_subset.scp </dev/null || /usr/sbin/groupadd $1 . pp_mkuser) cat <<'.';; eval user=\$$# grep "^$user:" /etc/passwd >/dev/null || /usr/sbin/useradd -s /usr/bin/false "$@" . pp_havelib) cat <<'.';; for dir in `echo /usr/lib${3+:$3} | tr : ' '`; do test -r "$dir/lib$1.${2-sl}" && return 0 done return 1 . *) pp_error "unknown function request: $1";; esac } pp_backend_kit_init_svc_vars () { : } pp_backend_kit_probe () { echo tru64-`uname -r | sed 's/V\([0-9]*\)\.\([0-9]*\)/\1\2/'` } pp_kit_service_group_script () { typeset grp svcs scriptpath out grp="$1" svcs="$2" scriptpath="/sbin/init.d/$grp" out="$pp_destdir$scriptpath" pp_add_file_if_missing $scriptpath run 755 || return 0 cat <<-. > $out #!/sbin/sh # generated by pp $pp_version svcs="$svcs" . cat <<-'.' >> $out #-- starts services in order.. stops them all if any break pp_start () { undo= for svc in $svcs; do /sbin/init.d/$svc start case $? in 0|4) undo="$svc $undo" ;; *) if test -n "$undo"; then for svc in $undo; do /sbin/init.d/$svc stop done return 1 fi ;; esac done return 0 } #-- stops services in reverse pp_stop () { reverse= for svc in $svcs; do reverse="$svc $reverse" done rc=0 for svc in $reverse; do /sbin/init.d/$svc stop || rc=$? done return $rc } case "$1" in start_msg) echo "Starting $svcs";; stop_msg) echo "Stopping $svcs";; start) pp_start;; stop) pp_stop;; *) echo "usage: $0 {start|stop|start_msg|stop_msg}" exit 1;; esac . } pp_kit_service_script () { typeset svc scriptpath out svc="$1" scriptpath="/sbin/init.d/$svc" pp_load_service_vars "$svc" test -n "$user" -a x"$user" != x"root" && cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\"" if test -z "$pidfile"; then pidfile="/var/run/$svc.pid" cmd="$cmd & echo \$! > \$pidfile" fi pp_add_file_if_missing $scriptpath run 755 cat <<-. > $pp_destdir$scriptpath svc="$svc" pidfile="$pidfile" pp_start () { $cmd } . cat <<-'.' >>$pp_destdir$scriptpath pp_stop () { if test ! -s "$pidfile"; then echo "Unable to stop $svc (no pid file)" return 1 else read pid < "$pidfile" if kill -0 "$pid" 2>/dev/null; then if kill -${stop_signal:-TERM} "$pid"; then rm -f "$pidfile" return 0 else echo "Unable to stop $svc" return 1 fi else rm -f "$pidfile" return 0 fi fi } pp_running () { if test ! -s "$pidfile"; then return 1 else read pid < "$pidfile" kill -0 "$pid" 2>/dev/null fi } case "$1" in start_msg) echo "Starting the $svc service";; stop_msg) echo "Stopping the $svc service";; start) if pp_running; then echo "$svc already running"; exit 0 elif pp_start; then echo "$svc started"; # rc(1M) says we should exit 4, but nobody expects it! exit 0 else exit 1 fi ;; stop) if pp_stop; then echo "$svc stopped"; exit 0 else exit 1 fi ;; *) echo "usage: $0 {start|stop|start_msg|stop_msg}" exit 1 ;; esac . } pp_kit_make_service () { typeset level priority startlevels stoplevels typeset svc svcvar svc="$1" svcvar=`pp_makevar $svc` #-- don't do anything if the script exists if test -s "$pp_destdir/sbin/init.d/$svc"; then pp_error "$pp_destdir/sbin/init.d/$svc exists" return fi # symlink the script, depending on the priorities chosen eval priority='${pp_kit_priority_'$svcvar'}' test -z "$priority" && priority="${pp_kit_priority:-50}" eval startlevels='${pp_kit_startlevels_'$svcvar'}' test -z "$startlevels" && startlevels="$pp_kit_startlevels" eval stoplevels='${pp_kit_stoplevels_'$svcvar'}' test -z "$stoplevels" && stoplevels="$pp_kit_stoplevels" # create the script and config file pp_kit_service_script $svc # fix the priority up case "$priority" in ???) :;; ??) priority=0$priority;; ?) priority=00$priority;; esac if test x"$stoplevels" = x"auto"; then stoplevels= test -z "$startlevels" || for level in $startlevels; do stoplevels="$stoplevels `expr $level - 1`" done fi # create the symlinks test -z "$startlevels" || for level in $startlevels; do echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%post.run echo " rm /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%preun.run done test -z "$stoplevels" || for level in $stoplevels; do echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%post.run echo " rm -f /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%preun.run done } pp_backend_kit_sizes () { awk ' BEGIN { root = usr = var = 0; } { if (substr($9, 1, 1) != "l") if (substr($10, 1, 6) == "./var/") var += $2; else if (substr($10, 1, 10) == "./usr/var/") var += $2 else if (substr($10, 1, 6) == "./usr/") usr += $2 else root += $2 } END { printf "%d\t%d\t%d", root, usr, var } ' "$@" } pp_kit_kits_global () { line=`sed -n '/^%%/q;/^'$2'=/{s/^'$2'=//p;q;}' <"$1"` test -z "$line" && return 1 eval "echo $line" : } pp_backend_kit_kits () { typeset KITFILE FROMDIR TODIR typeset SCPDIR SCPDIR="$pp_wrkdir/scps" PATH="/usr/lbin:/usr/bin:/etc:/usr/ucb:$PATH"; export PATH # XXX #umask 2 # XXX test $# -ge 3 || pp_die "pp_backend_kit_kits: too few arguments" KITFILE="$1"; shift FROMDIR="$1"; shift TODIR="$1"; shift test -f "$KITFILE" || pp_die "$KITFILE not found" test -d "$FROMDIR" || pp_die "$FROMDIR not found" test -d "$TODIR" || pp_die "$TODIR not found" INSTCTRL="$TODIR/instctrl" mkdir -p "$INSTCTRL" || pp_die "cannot create instctrl directory" chmod 775 "$INSTCTRL" grep "%%" $KITFILE > /dev/null || pp_die "no %% in $KITFILE" typeset NAME CODE VERS MI ROOT COMPRESS typeset S_LIST ALLSUBS NAME=`pp_kit_kits_global "$KITFILE" NAME` || pp_die "no NAME in $KITFILE" CODE=`pp_kit_kits_global "$KITFILE" CODE` || pp_die "no CODE in $KITFILE" VERS=`pp_kit_kits_global "$KITFILE" VERS` || pp_die "no VERS in $KITFILE" MI=`pp_kit_kits_global "$KITFILE" MI` || pp_die "no MI in $KITFILE" ROOT=`pp_kit_kits_global "$KITFILE" ROOT` COMPRESS=`pp_kit_kits_global "$KITFILE" COMPRESS` test -f "$MI" || pp_die "Inventory file $MI not found" case "$ROOT" in *ROOT) test -f "$TODIR/$ROOT" || pp_die "Root image $ROOT not found in $TODIR" ;; esac ALLSUBS=`awk 'insub==1 {print $1} /^%%/ {insub=1}' <"$KITFILE"` test $# -eq 0 && set -- $ALLSUBS pp_debug "Creating $# $NAME subsets." pp_debug "ALLSUBS=<$ALLSUBS>" if test x"$COMPRESS" = x"1"; then COMPRESS=: else COMPRESS=false fi #rm -f *.ctrl Volume* for SUB do test -z "$SUB" && pp_die "SUB is empty" typeset INV CTRL ROOTSIZE USRSIZE VARSIZE TSSUB #rm -f Volume* case $SUB in .*) :;; *) pp_verbose rm -f "$TODIR/$SUB"* "$INSTCTRL/$SUB"*;; esac TSSUB="$pp_wrkdir/ts.$SUB" pp_debug "kits: Subset $SUB" INV="$SUB.inv" CTRL="$SUB.ctrl" pp_debug "kits: Generating media creation information..." # Invcutter takes as input # SUB dir/path # and generates stl_inv(4) files, like this # f 0 00000 0 0 100644 2/11/09 010 f dir/path none SUB grep " $SUB\$" "$MI" | pp_verbose /usr/lbin/invcutter \ -v "$VERS" -f "$FROMDIR" > "$INSTCTRL/$INV" || pp_die "failed to create $INSTCTRL/$INV" chmod 664 "$INSTCTRL/$INV" pp_backend_kit_sizes "$INSTCTRL/$INV" > "$pp_wrkdir/kit.sizes" read ROOTSIZE USRSIZE VARSIZE < "$pp_wrkdir/kit.sizes" # Prefix each line with $FROMDIR. This will be stripped awk '$1 != "d" {print from $10}' from="$FROMDIR/" \ > "$TSSUB" < "$INSTCTRL/$INV" || pp_die "failed" NVOLS=0 pp_debug "kits: Creating $SUB control file..." sed '1,/^%%/d;/^'"$SUB"'/{p;q;}' < "$KITFILE" > "$pp_wrkdir/kit.line" read _SUB _IGNOR DEPS FLAGS DESC < "$pp_wrkdir/kit.line" if test -z "$_SUB"; then pp_warn "No such subset $SUB in $KITFILE" continue fi DEPS=`echo $DEPS | tr '|' ' '` case $FLAGS in FLGEXP*) pp_verbose FLAGS='"${'"$FLAGS"'}"' ;; esac case $DESC in *%*) DESC=`echo $DESC|awk -F% '{printf "%-36s%%%s\n", $1, $2}'`;; esac cat > "$INSTCTRL/$CTRL" <<-. NAME='$NAME $SUB' DESC=$DESC ROOTSIZE=$ROOTSIZE USRSIZE=$USRSIZE VARSIZE=$VARSIZE NVOLS=1:$NVOLS MTLOC=1:$TLOC DEPS="$DEPS" FLAGS=$FLAGS . chmod 664 "$INSTCTRL/$CTRL" pp_debug "kits: Making tar image" pp_verbose tar cfPR "$TODIR/$SUB" "$FROMDIR/" "$TSSUB" || pp_error "problem creating kit file" if $COMPRESS; then pp_debug "kits: Compressing" (cd "$TODIR" && compress -f -v "$SUB") || pp_die "problem compressing $TODIR/$SUB" SPC=`expr $SUB : '\(...\).*'` # first three characters SVC=`expr $SUB : '.*\(...\)'` # last three characters : > "$INSTCTRL/$SPC$SVC.comp" chmod 664 "$INSTCTRL/$SPC$SVC.comp" pp_debug "kits: Padding compressed file to 10kB" # wtf? rm -f "$TODIR/$SUB" pp_verbose \ dd if="$TODIR/$SUB.Z" of="$TODIR/$SUB" bs=10k conv=sync || pp_die "problem moving compressed file" rm -f "$TODIR/$SUB.Z" fi chmod 664 "$TODIR/$SUB" if test -f "$SCPDIR/$SUB.scp"; then cp "$SCPDIR/$SUB.scp" "$INSTCTRL/$SUB.scp" chmod 755 "$INSTCTRL/$SUB.scp" else pp_debug "kits: null subset control program for $SUB" : > "$INSTCTRL/$SUB.scp" chmod 744 "$INSTCTRL/$SUB.scp" fi pp_debug "kits: Finished creating media image for $SUB" done pp_debug "kits: Creating $CODE.image" case "$ROOT" in *ROOT) ALLSUBS="$ROOT $ALLSUBS" ;; esac (cd "$TODIR" && sum $ALLSUBS) > "$INSTCTRL/$CODE.image" chmod 664 "$INSTTRL/$CODE.image" pp_debug "kits: Creating INSTCTRL" (cd "$INSTCTRL" && tar cpvf - *) > "$TODIR/INSTCTRL" chmod 664 "$TODIR/INSTCTRL" cp "$INSTCTRL/$CODE.image" "$TODIR/$CODE.image" chmod 664 "$TODIR/$CODE.image" pp_debug "kits: Media image production complete" } pp_platforms="$pp_platforms rpm" pp_backend_rpm_detect () { test x"$1" = x"Linux" -a ! -f /etc/debian_version } pp_backend_rpm_init () { pp_rpm_version= pp_rpm_summary= pp_rpm_description= pp_rpm_group="Applications/Internet" pp_rpm_license="Unspecified" pp_rpm_vendor= pp_rpm_url= pp_rpm_packager= pp_rpm_provides= pp_rpm_requires= pp_rpm_requires_pre= pp_rpm_requires_post= pp_rpm_requires_preun= pp_rpm_requires_postun= pp_rpm_release= pp_rpm_epoch= pp_rpm_dev_group="Development/Libraries" pp_rpm_dbg_group="Development/Tools" pp_rpm_doc_group="Documentation" pp_rpm_dev_description= pp_rpm_dbg_description= pp_rpm_doc_description= pp_rpm_dev_requires= pp_rpm_dev_requires_pre= pp_rpm_dev_requires_post= pp_rpm_dev_requires_preun= pp_rpm_dev_requires_postun= pp_rpm_dbg_requires= pp_rpm_dbg_requires_pre= pp_rpm_dbg_requires_post= pp_rpm_dbg_requires_preun= pp_rpm_dbg_requires_postun= pp_rpm_doc_requires= pp_rpm_doc_requires_pre= pp_rpm_doc_requires_post= pp_rpm_doc_requires_preun= pp_rpm_doc_requires_postun= pp_rpm_dev_provides= pp_rpm_dbg_provides= pp_rpm_doc_provides= pp_rpm_autoprov= pp_rpm_autoreq= pp_rpm_autoreqprov= pp_rpm_dbg_pkgname=debug pp_rpm_dev_pkgname=devel pp_rpm_doc_pkgname=doc pp_rpm_defattr_uid=root pp_rpm_defattr_gid=root pp_rpm_detect_arch pp_rpm_detect_distro pp_rpm_rpmbuild=`pp_rpm_detect_rpmbuild` # SLES8 doesn't always come with readlink test -x /usr/bin/readlink -o -x /bin/readlink || pp_readlink_fn=pp_ls_readlink } pp_rpm_detect_arch () { pp_rpm_arch=auto #-- Find the default native architecture that RPM is configured to use cat <<-. >$pp_wrkdir/dummy.spec Name: dummy Version: 1 Release: 1 Summary: dummy Group: ${pp_rpm_group} License: ${pp_rpm_license} %description dummy . $pp_opt_debug && cat $pp_wrkdir/dummy.spec pp_rpm_arch_local=`rpm -q --qf '%{arch}\n' --specfile $pp_wrkdir/dummy.spec` rm $pp_wrkdir/dummy.spec #-- Ask the kernel what machine architecture is in use local arch for arch in "`uname -m`" "`uname -p`"; do case "$arch" in i?86) pp_rpm_arch_std=i386 break ;; x86_64|ppc|ppc64|ppc64le|ia64|s390|s390x) pp_rpm_arch_std="$arch" break ;; powerpc) # Probably AIX case "`/usr/sbin/lsattr -El proc0 -a type -F value`" in PowerPC_POWER*) pp_rpm_arch_std=ppc64;; *) pp_rpm_arch_std=ppc;; esac break ;; *) pp_rpm_arch_std=unknown ;; esac done #-- Later on, when files are processed, we use 'file' to determine # what platform ABIs are used. This is used when pp_rpm_arch == auto pp_rpm_arch_seen= } pp_rpm_detect_distro () { pp_rpm_distro= if test -f /etc/whitebox-release; then pp_rpm_distro=`awk ' /^White Box Enterprise Linux release/ { print "wbel" $6; exit; } ' /etc/whitebox-release` elif test -f /etc/mandrakelinux-release; then pp_rpm_distro=`awk ' /^Mandrakelinux release/ { print "mand" $3; exit; } ' /etc/mandrake-release` elif test -f /etc/mandrake-release; then pp_rpm_distro=`awk ' /^Linux Mandrake release/ { print "mand" $4; exit; } /^Mandrake Linux release/ { print "mand" $4; exit; } ' /etc/mandrake-release` elif test -f /etc/fedora-release; then pp_rpm_distro=`awk ' /^Fedora Core release/ { print "fc" $4; exit; } /^Fedora release/ { print "f" $3; exit; } ' /etc/fedora-release` elif test -f /etc/redhat-release; then pp_rpm_distro=`sed -n \ -e 's/^Red Hat Linux.*release \([0-9][0-9\.]*\).*/rh\1/p' \ -e 's/^Red Hat Enterprise Linux.*release \([0-9][0-9\.]*\).*/rhel\1/p' \ -e 's/^CentOS.*release \([0-9][0-9\.]*\).*/centos\1/p' \ /etc/redhat-release` elif test -f /etc/SuSE-release; then pp_rpm_distro=`awk ' /^SuSE Linux [0-9]/ { print "suse" $3; exit; } /^SUSE LINUX [0-9]/ { print "suse" $3; exit; } /^openSUSE [0-9]/ { print "suse" $2; exit; } /^S[uU]SE Linux Enterprise Server [0-9]/ { print "sles" $5; exit; } /^S[uU]SE LINUX Enterprise Server [0-9]/ { print "sles" $5; exit; } /^SuSE SLES-[0-9]/ { print "sles" substr($2,6); exit; } ' /etc/SuSE-release` elif test -f /etc/os-release; then pp_rpm_distro="`. /etc/os-release && echo \$ID\$VERSION`" elif test -f /etc/pld-release; then pp_rpm_distro=`awk ' /^[^ ]* PLD Linux/ { print "pld" $1; exit; } ' /etc/pld-release` elif test X"`uname -s 2>/dev/null`" = X"AIX"; then local r v r=`uname -r` v=`uname -v` pp_rpm_distro="aix$v$r" fi pp_rpm_distro=`echo $pp_rpm_distro | tr -d .` test -z "$pp_rpm_distro" && pp_warn "unknown distro" } pp_rpm_detect_rpmbuild () { local cmd for cmd in rpmbuild rpm; do if `which $cmd > /dev/null 2>&1`; then echo $cmd return 0 fi done pp_error "Could not find rpmbuild" # Default to `rpmbuild` in case it magically appears echo rpmbuild return 1 } pp_rpm_label () { local label arg label="$1"; shift for arg do test -z "$arg" || echo "$label: $arg" done } pp_rpm_writefiles () { local _l t m o g f p st fo farch while read t m o g f p st; do _l="$p" test $t = d && _l="%dir ${_l%/}/" if test $t = s; then # rpm warns if %attr contains a mode for symlinks m=- elif test x"$m" = x"-"; then case "$t" in d) m=755;; f) m=644;; esac fi test x"$o" = x"-" && o="${pp_rpm_defattr_uid:-root}" test x"$g" = x"-" && g="${pp_rpm_defattr_gid:-root}" _l="%attr($m,$o,$g) $_l" if test "$t" = "f" -a x"$pp_rpm_arch" = x"auto"; then fo=`file "${pp_destdir}$p" 2>/dev/null` #NB: The following should match executables and shared objects, #relocatable objects. It will not match .a files however. case "$fo" in *": ELF 32-bit LSB "*", Intel 80386"*) farch=i386;; *": ELF 64-bit LSB "*", AMD x86-64"*|\ *": ELF 64-bit LSB "*", x86-64"*) farch=x86_64;; *": ELF 32-bit MSB "*", PowerPC"*) farch=ppc;; *": ELF 64-bit LSB "*", 64-bit PowerPC"*) farch=ppc64le;; *": ELF 64-bit MSB "*", 64-bit PowerPC"*) farch=ppc64;; *": ELF 64-bit LSB "*", IA-64"*) farch=ia64;; *": ELF 32-bit MSB "*", IBM S/390"*) farch=s390;; *": ELF 64-bit MSB "*", IBM S/390"*) farch=s390x;; *"executable (RISC System/6000)"*) farch=ppc;; *"64-bit XCOFF executable"*) farch=ppc64;; *": ELF 64-bit LSB "*", ARM aarch64"*) farch=aarch64;; *" ELF "*) farch=ELF;; *) farch=noarch;; esac # If file(1) doesn't provide enough info, try readelf(1) if test "$farch" = "ELF"; then fo=`readelf -h "${pp_destdir}$p" | awk '{if ($1 == "Class:") {class=$2} else if ($1 == "Machine:") {machine=$0; sub(/^ *Machine: */, "", machine)}} END {print class " " machine}' 2>/dev/null` case "$fo" in "ELF32 Intel 80386") farch=i386;; "ELF64 "*[xX]"86-64") farch=x86_64;; "ELF32 PowerPC") farch=ppc;; "ELF64 PowerPC"*) farch=ppc64;; "ELF64 IA-64") farch=ia64;; "ELF32 IBM S/390") farch=s390;; "ELF64 IBM S/390") farch=s390x;; "ELF64 AArch64") farch=aarch64;; *) farch=noarch;; esac fi pp_debug "file: $fo -> $farch" test x"$farch" = x"noarch" || pp_add_to_list pp_rpm_arch_seen $farch fi case $f in *v*) _l="%config(noreplace) $_l";; esac echo "$_l" done echo } pp_rpm_subname () { case "$1" in run) : ;; dbg) echo "${2}${pp_rpm_dbg_pkgname}";; dev) echo "${2}${pp_rpm_dev_pkgname}";; doc) echo "${2}${pp_rpm_doc_pkgname}";; *) pp_error "unknown component '$1'"; esac } pp_rpm_depend () { local _name _vers while read _name _vers; do case "$_name" in ""| "#"*) continue ;; esac echo "Requires: $_name ${_vers:+>= $_vers}" done } pp_rpm_conflict () { local _name _vers while read _name _vers; do case "$_name" in ""| "#"*) continue ;; esac echo "Conflicts: $_name ${_vers:+>= $_vers}" done } pp_rpm_override_requires () { local orig_find_requires if test -z "$pp_rpm_depend_filter_cmd"; then return 0 fi orig_find_requires=`rpm --eval '%{__find_requires}'` cat << EOF > "$pp_wrkdir/filtered-find-requires" $orig_find_requires \$@ | $pp_rpm_depend_filter_cmd EOF chmod +x "$pp_wrkdir/filtered-find-requires" echo "%define __find_requires $pp_wrkdir/filtered-find-requires" # Might be necessary for old versions of RPM? Not for 4.4.2. #echo "%define _use_internal_dependency_generator 0" } pp_backend_rpm () { local cmp specfile _summary _group _desc _pkg _subname svc _script specfile=$pp_wrkdir/$name.spec : > $specfile #-- force existence of a 'run' component pp_add_component run : >> $pp_wrkdir/%files.run if test -z "$pp_rpm_arch"; then pp_error "Unknown RPM architecture" return 1 fi #-- Write the header components of the RPM spec file cat <<-. >>$specfile Name: ${pp_rpm_name:-$name} Version: ${pp_rpm_version:-$version} Release: ${pp_rpm_release:-1} Summary: ${pp_rpm_summary:-$summary} Group: ${pp_rpm_group} License: ${pp_rpm_license} . pp_rpm_label "URL" "$pp_rpm_url" >>$specfile pp_rpm_label "Vendor" "${pp_rpm_vendor:-$vendor}" >>$specfile pp_rpm_label "Packager" "$pp_rpm_packager" >>$specfile pp_rpm_label "Provides" "$pp_rpm_provides" >>$specfile pp_rpm_label "Requires(pre)" "$pp_rpm_requires_pre" >>$specfile pp_rpm_label "Requires(post)" "$pp_rpm_requires_post" >>$specfile pp_rpm_label "Requires(preun)" "$pp_rpm_requires_preun" >>$specfile pp_rpm_label "Requires(postun)" "$pp_rpm_requires_postun" >>$specfile pp_rpm_label "AutoProv" "$pp_rpm_autoprov" >>$specfile pp_rpm_label "AutoReq" "$pp_rpm_autoreq" >>$specfile pp_rpm_label "AutoReqProv" "$pp_rpm_autoreqprov" >>$specfile test -n "$pp_rpm_serial" && pp_warn "pp_rpm_serial deprecated" if test -n "$pp_rpm_epoch"; then #-- Epoch was introduced in RPM 2.5.6 case `$pp_rpm_rpmbuild --version 2>/dev/null` in 1.*|2.[0-5].*|2.5.[0-5]) pp_rpm_label "Serial" $pp_rpm_epoch >>$specfile;; *) pp_rpm_label "Epoch" $pp_rpm_epoch >>$specfile;; esac fi if test -n "$pp_rpm_requires"; then pp_rpm_label "Requires" "$pp_rpm_requires" >>$specfile elif test -s $pp_wrkdir/%depend.run; then pp_rpm_depend < $pp_wrkdir/%depend.run >> $specfile fi if test -s $pp_wrkdir/%conflict.run; then pp_rpm_conflict < $pp_wrkdir/%conflict.run >> $specfile fi pp_rpm_override_requires >> $specfile cat <<-. >>$specfile %description ${pp_rpm_description:-$description} . for cmp in $pp_components; do case $cmp in run) continue;; dev) _summary="development tools for $pp_rpm_summary" _group="$pp_rpm_dev_group" _desc="${pp_rpm_dev_description:-Development libraries for $name. $pp_rpm_description.}" ;; doc) _summary="documentation for $pp_rpm_summary" _group="$pp_rpm_doc_group" _desc="${pp_rpm_doc_description:-Documentation for $name. $pp_rpm_description.}" ;; dbg) _summary="diagnostic tools for $pp_rpm_summary" _group="$pp_rpm_dbg_group" _desc="${pp_rpm_dbg_description:-Diagnostic tools for $name.}" ;; esac _subname=`pp_rpm_subname $cmp` cat <<-. %package $_subname Summary: $name $_summary Group: $_group . for _script in pre post preun postun; do eval '_pkg="$pp_rpm_'$cmp'_requires_'$_script'"' if test -n "$_pkg"; then eval pp_rpm_label "Requires($_script)" $_pkg fi done eval '_pkg="$pp_rpm_'$cmp'_requires"' if test -n "$_pkg"; then eval pp_rpm_label Requires ${pp_rpm_name:-$name} $_pkg elif test -s $pp_wrkdir/%depend.$cmp; then pp_rpm_depend < $pp_wrkdir/%depend.$cmp >> $specfile fi if test -s $pp_wrkdir/%conflict.$cmp; then pp_rpm_conflict < $pp_wrkdir/%conflict.$cmp >> $specfile fi eval '_pkg="$pp_rpm_'$cmp'_provides"' eval pp_rpm_label Provides $_pkg cat <<-. %description $_subname $_desc . done >>$specfile #-- NB: we do not put any %prep, %build or %install RPM sections # into the spec file. #-- add service start/stop code if test -n "$pp_services"; then pp_rpm_service_install_common >> $pp_wrkdir/%post.run #-- record the uninstall commands in reverse order for svc in $pp_services; do pp_load_service_vars $svc pp_rpm_service_make_service_files $svc || pp_error "could not create service files for $svc" #-- append %post code to install the svc pp_rpm_service_install $svc >> $pp_wrkdir/%post.run #-- prepend %preun code to uninstall svc # (use files in case vars are modified) pp_rpm_service_remove $svc | pp_prepend $pp_wrkdir/%preun.run done pp_rpm_service_remove_common | pp_prepend $pp_wrkdir/%preun.run fi # make convenience service groups if test -n "$pp_service_groups"; then for grp in $pp_service_groups; do pp_rpm_service_group_make_init_script \ $grp "`pp_service_get_svc_group $grp`" done fi #-- Write the RPM %file sections # (do this after services, since services adds to %files.run) for cmp in $pp_components; do _subname=`pp_rpm_subname $cmp` if test -s $pp_wrkdir/%check.$cmp; then echo "" echo "%pre $_subname" cat $pp_wrkdir/%check.$cmp echo : # causes script to exit true by default fi if test -s $pp_wrkdir/%files.$cmp; then echo "" echo "%files $_subname" pp_rpm_writefiles < $pp_wrkdir/%files.$cmp fi if test -n "$pp_rpm_ghost"; then for ghost in $pp_rpm_ghost; do echo "%ghost $ghost" done fi if test -s $pp_wrkdir/%pre.$cmp; then echo "" echo "%pre $_subname" cat $pp_wrkdir/%pre.$cmp echo : # causes script to exit true fi if test -s $pp_wrkdir/%post.$cmp; then echo "" echo "%post $_subname" cat $pp_wrkdir/%post.$cmp echo : # causes script to exit true fi if test -s $pp_wrkdir/%preun.$cmp; then echo "" echo "%preun $_subname" cat $pp_wrkdir/%preun.$cmp echo : # causes script to exit true fi if test -s $pp_wrkdir/%postun.$cmp; then echo "" echo "%postun $_subname" cat $pp_wrkdir/%postun.$cmp echo : # causes script to exit true fi done >>$specfile #-- create a suitable work area for rpmbuild cat <<-. >$pp_wrkdir/.rpmmacros %_topdir $pp_wrkdir # XXX Note escaped %% for use in headerSprintf %_rpmfilename %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm . mkdir $pp_wrkdir/RPMS mkdir $pp_wrkdir/BUILD if test x"$pp_rpm_arch" = x"auto"; then #-- Reduce the arch_seen list to exactly one item case "$pp_rpm_arch_seen" in "i386 x86_64"|"x86_64 i386") pp_rpm_arch_seen=x86_64;; *"s390 s390x"* | *"s390x s390"* ) pp_rpm_arch_seen=s390x;; *"aarch64"* ) pp_rpm_arch_seen=aarch64;; *" "*) pp_error "detected multiple targets: $pp_rpm_arch_seen" pp_rpm_arch_seen=unknown;; # not detected "") pp_warn "detected no binaries: using target noarch" pp_rpm_arch_seen=noarch;; *) pp_debug "detected architecture $pp_rpm_arch_seen" esac pp_rpm_arch="$pp_rpm_arch_seen" fi . $pp_wrkdir/%fixup $pp_opt_debug && cat $specfile pp_debug "creating: `pp_backend_rpm_names`" pp_debug "pp_rpm_arch_seen = <${pp_rpm_arch_seen}>" pp_debug "pp_rpm_arch = <${pp_rpm_arch}>" HOME=$pp_wrkdir \ pp_verbose \ $pp_rpm_rpmbuild -bb \ --buildroot="$pp_destdir/" \ --target="${pp_rpm_arch}" \ --define='_unpackaged_files_terminate_build 0' \ --define='_use_internal_dependency_generator 0' \ `$pp_opt_debug && echo --verbose || echo --quiet` \ $pp_rpm_rpmbuild_extra_flags \ $specfile || pp_error "Problem creating RPM packages" for f in `pp_backend_rpm_names`; do # The package might be in an arch-specific subdir pkgfile=not-found for dir in $pp_wrkdir/RPMS/${pp_rpm_arch} $pp_wrkdir/RPMS; do if test -f $dir/$f; then pkgfile=$dir/$f fi done if test x"$pkgfile" = x"not-found"; then pp_error "Problem predicting RPM filename: $f" else ln $pkgfile $pp_wrkdir/$f fi done } pp_rpm_output_name () { echo "${pp_rpm_name:-$name}`pp_rpm_subname "$1" -`-${pp_rpm_version:-$version}-${pp_rpm_release:-1}.${pp_rpm_arch}.rpm" } pp_backend_rpm_names () { local cmp _subname for cmp in $pp_components; do pp_rpm_output_name $cmp done } pp_backend_rpm_cleanup () { : } pp_rpm_print_requires () { local _subname _name echo "CPU:$pp_rpm_arch" ## XXX should be lines of the form (from file/ldd/objdump) # EXEC:/bin/sh # RTLD:libc.so.4:open rpm -q --requires -p $pp_wrkdir/`pp_rpm_output_name $1` |sed -e '/^rpmlib(/d;s/ //g;s/^/RPM:/' | sort -u } pp_backend_rpm_install_script () { local cmp _subname echo "#!/bin/sh" pp_install_script_common cat <<. cmp_to_pkgname () { local oi name if test x"\$1" = x"--only-installed"; then #-- only print if installation detected oi=false shift else oi=true fi test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do _subname=`pp_rpm_subname $cmp -` echo "$cmp) name=${pp_rpm_name:-$name}${_subname};;" done cat <<. *) usage;; esac if \$oi || rpm -q "\$name" >/dev/null 2>/dev/null; then echo "\$name" fi done } cmp_to_pathname () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo "$cmp) echo \${PP_PKGDESTDIR:-.}/`pp_rpm_output_name $cmp` ;;" done cat <<. *) usage;; esac done } print_requires () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo "$cmp) cat <<'._end'" pp_rpm_print_requires $cmp echo "._end"; echo ';;' done cat <<. *) usage;; esac done } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo $pp_components ;; list-services) test \$# -eq 0 || usage \$op echo $pp_services ;; list-files) test \$# -ge 1 || usage \$op cmp_to_pathname "\$@" ;; install) test \$# -ge 1 || usage \$op verbose rpm -U --replacepkgs --oldpackage \ \`cmp_to_pathname "\$@"\` ;; uninstall) test \$# -ge 1 || usage \$op pkgs=\`cmp_to_pkgname --only-installed "\$@"\` if test -z "\$pkgs"; then verbosemsg "nothing to uninstall" else verbose rpm -e \$pkgs fi ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do verbose /etc/init.d/\$svc \$op || ec=1 done exit \$ec ;; print-platform) test \$# -eq 0 || usage \$op echo "linux-${pp_rpm_arch}" ;; print-requires) test \$# -ge 1 || usage \$op print_requires "\$@" ;; *) usage ;; esac . } pp_backend_rpm_probe () { echo "${pp_rpm_distro}-${pp_rpm_arch_std}" } pp_backend_rpm_vas_platforms () { case "$pp_rpm_arch_std" in x86_64) echo "linux-x86_64.rpm linux-x86.rpm";; *86) echo "linux-x86.rpm";; s390) echo "linux-s390";; s390x) echo "linux-s390x";; ppc*) echo "linux-glibc23-ppc64 linux-glibc22-ppc64";; ia64) echo "linux-ia64";; *) pp_die "unknown architecture $pp_rpm_arch_std";; esac } pp_rpm_service_install_common () { cat <<-'.' _pp_install_service () { local svc level svc="$1" if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ] then # LSB-style install /usr/lib/lsb/install_initd /etc/init.d/$svc &> /dev/null elif [ -x /sbin/chkconfig ]; then # Red Hat/chkconfig-style install /sbin/chkconfig --add $svc &> /dev/null /sbin/chkconfig $svc off &> /dev/null else : # manual links under /etc/init.d fi } _pp_enable_service () { local svc level svc="$1" if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ] then # LSB-style install : # not sure how to enable elif [ -x /sbin/chkconfig ]; then # Red Hat/chkconfig-style install /sbin/chkconfig $svc on &> /dev/null else # manual install set -- `sed -n -e 's/^# Default-Start://p' /etc/init.d/$svc` start_priority=`sed -n -e 's/^# X-Quest-Start-Priority:[[:space:]]*//p' /etc/init.d/$svc` stop_priority=`sed -n -e 's/^# X-Quest-Stop-Priority:[[:space:]]*//p' /etc/init.d/$svc` # Provide default start & stop priorities of 20 & 80 in # accordance with Debian update-rc.d defaults if [ -z "$start_priority" ]; then start_priority=20 fi if [ -z "$stop_priority" ]; then stop_priority=80 fi if [ -d "/etc/rc.d" ];then rcdir=/etc/rc.d else rcdir=/etc fi for level do ln -sf /etc/init.d/$svc $rcdir/rc$level.d/S$start_priority$svc; done set -- `sed -n -e 's/^# Default-Stop://p' /etc/init.d/$svc` for level do ln -sf /etc/init.d/$svc $rcdir/rc$level.d/K$stop_priority$svc; done fi } . pp_systemd_service_install_common } pp_rpm_service_remove_common () { cat <<-'.' _pp_remove_service () { local svc svc="$1" /etc/init.d/$svc stop >/dev/null 2>&1 if [ -x /usr/lib/lsb/remove_initd -a ! -r /etc/redhat-release ] then /usr/lib/lsb/remove_initd /etc/init.d/$svc &> /dev/null elif [ -x /sbin/chkconfig ]; then /sbin/chkconfig --del $svc &> /dev/null else if [ -d "/etc/rc.d" ];then rcdir=/etc/rc.d else rcdir=/etc fi rm -f $rcdir/rc?.d/[SK]??$svc fi } . pp_systemd_service_remove_common } pp_rpm_service_install () { echo "" echo "_pp_systemd_init" echo 'if test -n "$systemctl_cmd"; then' echo " _pp_systemd_install $1" test $enable = yes && echo " _pp_systemd_enable $1" echo "else" echo " _pp_install_service $1" test $enable = yes && echo " _pp_enable_service $1" echo "fi" } pp_rpm_service_remove () { cat <<-. if [ "\$1" = "remove" -o "\$1" = "0" ]; then # only remove the service if not upgrade _pp_remove_service $1 _pp_systemd_disable $1 _pp_systemd_remove $1 fi . } pp_backend_rpm_init_svc_vars () { reload_signal= start_runlevels=${pp_rpm_default_start_runlevels-"2 3 4 5"} # == lsb default-start stop_runlevels=${pp_rpm_default_stop_runlevels-"0 1 6"} # == lsb default-stop svc_description="${pp_rpm_default_svc_description}" # == lsb short descr svc_process= svc_init_filename="${pp_rpm_svc_init_filename}" # == $svc.init svc_init_filepath="${pp_rpm_svc_init_filepath}" # == /etc/init.d/ by default lsb_required_start='$local_fs $network' lsb_should_start= lsb_required_stop= lsb_description= start_priority=50 stop_priority=50 #-- stop_priority = 100 - start_priority } pp_rpm_service_group_make_init_script () { local grp=$1 local svcs="$2" local script=/etc/init.d/$grp local out=$pp_destdir$script pp_add_file_if_missing $script run 755 || return 0 cat <<-. >>$out #!/bin/sh svcs="$svcs" . cat <<-'.' >>$out #-- prints usage message pp_usage () { echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2 return 2 } #-- starts services in order.. stops them all if any break pp_start () { undo= for svc in $svcs; do if /etc/init.d/$svc start; then undo="$svc $undo" else if test -n "$undo"; then for svc in $undo; do /etc/init.d/$svc stop done return 1 fi fi done return 0 } #-- stops services in reverse pp_stop () { reverse= for svc in $svcs; do reverse="$svc $reverse" done rc=0 for svc in $reverse; do /etc/init.d/$svc stop || rc=$? done return $rc } #-- returns true only if all services return true status pp_status () { rc=0 for svc in $svcs; do /etc/init.d/$svc status || rc=$? done return $rc } pp_reload () { rc=0 for svc in $svcs; do /etc/init.d/$svc reload || rc=$? done return $rc } case "$1" in start) pp_start;; stop) pp_stop;; restart) pp_stop; pp_start;; status) pp_status;; try-restart|condrestart) if pp_status >/dev/null; then pp_restart fi;; reload) pp_reload;; force-reload) if pp_status >/dev/null; then pp_reload else pp_restart fi;; *) pp_usage;; esac . chmod 755 $out } pp_rpm_service_make_service_files () { local svc=${svc_init_filename:-$1} local script="${svc_init_filepath:-"/etc/init.d"}/$svc" local out=$pp_destdir$script local _process _cmd _rpmlevels pp_add_file_if_missing $script run 755 || return 0 #-- start out as an empty shell script cat <<-'.' >$out #!/bin/sh . #-- determine the process name from $cmd unless $svc_process is given set -- $cmd _process=${svc_process:-"$1"} #-- construct a start command that builds a pid file if needed _cmd="$cmd"; if test -z "$pidfile"; then pidfile=/var/run/$svc.pid _cmd="$cmd & echo \$! > \$pidfile" fi if test "$user" != "root"; then _cmd="su $user -c exec $_cmd"; fi #-- generate the Red Hat chkconfig headers _rpmlevels=`echo $start_runlevels | tr -d ' '` cat <<-. >>$out # chkconfig: ${_rpmlevels:--} ${start_priority:-50} ${stop_priority:-50} # description: ${svc_description:-no description} # processname: ${_process} # pidfile: ${pidfile} . #-- generate the LSB init info cat <<-. >>$out ### BEGIN INIT INFO # Provides: ${svc} # Required-Start: ${lsb_required_start} # Should-Start: ${lsb_should_start} # Required-Stop: ${lsb_required_stop} # Default-Start: ${start_runlevels} # Default-Stop: ${stop_runlevels} # Short-Description: ${svc_description} ### END INIT INFO # Generated by PolyPackage ${pp_version} # ${copyright} prog="`echo $cmd | sed -e 's: .*::' -e 's:^.*/::'`" . if test x"${svc_description}" = x"${pp_rpm_default_svc_description}"; then svc_description= fi #-- write service-specific definitions cat <<. >>$out #-- definitions specific to service ${svc} svc_name="${svc_description:-$svc service}" user="${user}" pidfile="${pidfile}" stop_signal="${stop_signal}" reload_signal="${reload_signal}" pp_exec_cmd () { $_cmd; } . #-- write the generic part of the init script cat <<'.' >>$out #-- use system message logging, if available if [ -f /lib/lsb/init-functions -a ! -r /etc/redhat-release ]; then . /lib/lsb/init-functions pp_success_msg () { log_success_msg "$@"; } pp_failure_msg () { log_failure_msg "$@"; } pp_warning_msg () { log_warning_msg "$@"; } elif [ -f /etc/init.d/functions ]; then . /etc/init.d/functions pp_success_msg () { echo -n "$*"; success "$@"; echo; } pp_failure_msg () { echo -n "$*"; failure "$@"; echo; } pp_warning_msg () { echo -n "$*"; warning "$@"; echo; } else pp_success_msg () { echo ${1:+"$*:"} OK; } pp_failure_msg () { echo ${1:+"$*:"} FAIL; } pp_warning_msg () { echo ${1:+"$*:"} WARNING; } fi #-- prints a status message pp_msg () { echo -n "$*: "; } #-- prints usage message pp_usage () { echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2 return 2 } #-- reloads the service, if possible # returns 0=success 1=failure 3=unimplemented pp_reload () { test -n "$reload_signal" || return 3 # unimplemented pp_msg "Reloading ${svc_name}" if pp_signal -${reload_signal}; then pp_success_msg return 0 else pp_failure_msg "not running" return 1 fi } #-- delivers signal $1 to the pidfile # returns 0=success 1=failure pp_signal () { if test -s "$pidfile"; then read pid < "$pidfile" 2>/dev/null kill "$@" "$pid" 2>/dev/null else return 1 fi } #-- verifies that ${svc_name} is running # returns 0=success 1=failure pp_running () { if test -s "$pidfile"; then read pid < "$pidfile" 2>/dev/null if test ${pid:-0} -gt 1 && kill -0 "$pid" 2>/dev/null; then # make sure name matches pid="`ps -p $pid 2>/dev/null | sed -n \"s/^ *\($pid\) .*$prog *$/\1/p\"`" if test -n "$pid"; then return 0 fi fi fi return 1 } #-- prints information about the service status # returns 0=running 1=crashed 3=stopped pp_status () { pp_msg "Checking for ${svc_name}" if pp_running; then pp_success_msg "running" return 0 elif test -s "$pidfile"; then pp_failure_msg "not running (crashed)" return 1 else pp_failure_msg "not running" return 3 fi } #-- starts the service # returns 0=success 1=failure pp_start () { pp_msg "Starting ${svc_name}" if pp_status >/dev/null; then pp_warning_msg "already started" return 0 elif pp_exec_cmd; then pp_success_msg return 0 else pp_failure_msg "cannot start" return 1 fi } #-- stops the service # returns 0=success (always) pp_stop () { pp_msg "Stopping ${svc_name}" if pp_signal -${stop_signal}; then pp_success_msg else pp_success_msg "already stopped" fi rm -f "$pidfile" return 0 } #-- stops and starts the service pp_restart () { pp_stop pp_start } case "$1" in start) pp_start;; stop) pp_stop;; restart) pp_restart;; status) pp_status;; try-restart|condrestart) if pp_status >/dev/null; then pp_restart fi;; reload) pp_reload;; force-reload) if pp_status >/dev/null; then pp_reload else pp_restart fi;; *) pp_usage;; esac . chmod 755 $out # Create systemd service file pp_systemd_make_service_file $svc } pp_backend_rpm_function () { case "$1" in pp_mkgroup) cat<<'.';; /usr/sbin/groupadd -f -r "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat<<'.';; pp_mkgroup "${2:-$1}" || return 1 /usr/sbin/useradd \ -g "${2:-$1}" \ -M -d "${3:-/nonexistent}" \ -s "${4:-/bin/false}" \ -r "$1" . pp_havelib) cat<<'.';; for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0 done return 1 . *) false;; esac } : NOTES <<. # creating a dmg file for publishing on the web hdiutil create -srcfolder /path/foo foo.dmg hdiutil internet-enable -yes /path/foo.dmg # Layout for packages -/component/ -/extras/postinstall -/extras/postupgrade # /Developer/usr/bin/packagemaker (man packagemaker) Make a bunch of packages, and then build a 'distribution' which is only understood by macos>10.4 # Message files in the resource path used are Welcome.{rtf,html,rtfd,txt} - limited text shown in Intro ReadMe.{rtf,html,rtfd,txt} - scrollable/printable, after Intro License.{rtf,html,rtfd,txt} - ditto, user must click 'Accept' background.{jpg,tif,gif,pict,eps,pdf} 620x418 background image # These scripts looked for in the resource path InstallationCheck $pkgpath $defaultloc $targetvol 0:ok 32:warn 32+x:warn[1] 64:stop 96+x:stop[2] VolumeCheck $volpath 0:ok 32:failure 32+x:failure[3] preflight $pkgpath $targetloc $targetvol [priv] preinstall $pkgpath $targetloc $targetvol [priv] preupgrade $pkgpath $targetloc $targetvol [priv] postinstall $pkgpath $targetloc $targetvol [priv] postupgrade $pkgpath $targetloc $targetvol [priv] postflight $pkgpath $targetloc $targetvol [priv] 0:ok else fail (for all scripts) A detailed reason is deduced by finding an index x (16..31) in the file InstallationCheck.strings or VolumeCheck.strings. Scripts marked [priv] are executed with root privileges. None of the [priv] scripts are used by metapackages. # Default permissions Permissions of existing directories should match those of a clean install of the OS; typically root:admin 0775 New directories or files should be 0775 or 0664 with the appropriate user:group. Exceptions: /etc root:admin 0755 /var root:admin 0755 Info.plist = { CFBundleGetInfoString: "1.2.3, One Identity LLC.", CFBundleIdentifier: "com.quest.rc.openssh", CFBundleShortVersionString: "1.2.3", IFMajorVersion: 1, IFMinorVersion: 2, IFPkgFlagAllowBackRev: false, IFPkgFlagAuthorizationAction: "AdminAuthorization", IFPkgFlagDefaultLocation: "/", IFPkgFlagFollowLinks: true, IFPkgFlagInstallFat: false, IFPkgFlagInstalledSize: , # this is added by packagemaker IFPkgFlagIsRequired: false, IFPkgFlagOverwritePermissions: false, IFPkgFlagRelocatable: false, IFPkgFlagRestartAction: "NoRestart", IFPkgFlagRootVolumeOnly: false, IFPkgFlagUpdateInstalledLanguages: false, IFPkgFormatVersion= 0.10000000149011612, IFRequirementDicts: [ { Level = "requires", SpecArgument = "/opt/quest/lib/libvas.4.2.0.dylib", SpecType = "file", TestObject = true, TestOperator = "eq", } ] } Description.plist = { IFPkgDescriptionDescription = "this is the description text", IFPkgDescriptionTitle = "quest-openssh" } # Startup scripts 'launchd' is a kind of combined inetd and rc/init.d system. Create a /Library/LaunchDaemons/$daemonname.plist file Examples found in /System/Library/LaunchDaemons/ See manual page launchd.plist(5) for details: { Label: "com.quest.rc.foo", # required Program: "/sbin/program", ProgramArguments: [ "/sbin/program", "arg1", "arg2" ], # required RunAtLoad: true, WatchPaths: [ "/etc/crontab" ], QueueDirectories: [ "/var/cron/tabs" ], inetdCompatibility: { Wait: false }, # inetd-only OnDemand: false, # recommended SessionCreate: true, UserName: "nobody", InitGroups: true, Sockets: { # inetd only Listeners: { SockServiceName: "ssh", Bonjour: ["ssh", "sftp-ssh"], } }, Disabled: false, StandardErrorPath: "/dev/null", } How to add a new user dscl . -create /Users/$user dscl . -create /Users/$user UserShell /bin/bash dscl . -create /Users/$user RealName "$user" dscl . -create /Users/$user UniqueID $uid dscl . -create /Users/$user PrimaryGroupID $gid dscl . -create /Users/$user NFSHomeDirectory /Users/$user dscl . -passwd /Users/$user "$passwd" mkdir /Users/$user chown $uid.$gid /Users/$user . pp_platforms="$pp_platforms macos" pp_backend_macos_detect () { [ x"$1" = x"Darwin" ] } pp_backend_macos_init () { pp_macos_default_bundle_id_prefix="com.quest.rc." pp_macos_bundle_id= pp_macos_bundle_vendor= pp_macos_bundle_version= pp_macos_bundle_info_string= pp_macos_pkg_type=bundle pp_macos_pkg_license= pp_macos_pkg_readme= pp_macos_pkg_welcome= pp_macos_sudo=sudo pp_macos_installer_plugin= # OS X puts the library version *before* the .dylib extension pp_shlib_suffix='*.dylib' } pp_macos_plist () { typeset in in="" while test $# -gt 0; do case "$1" in start-plist) cat <<-.; in=" "; shift ;; . end-plist) echo ""; in=; shift;; '[') echo "$in"; in="$in "; shift;; ']') echo "$in"; in="${in# }"; shift;; '{') echo ""; in="$in "; shift;; '}') echo ""; in="${in# }"; shift;; key) shift; echo "$in$1"; shift;; string) shift; echo "$1" | sed -e 's/&/&/g;s//\>/g;' \ -e 's/^/'"$in"'/;s/$/<\/string>/'; shift;; true) echo "$in"; shift;; false) echo "$in"; shift;; real) shift; echo "$in$1"; shift;; integer) shift; echo "$in$1"; shift;; date) shift; echo "$in$1"; shift;; # ISO 8601 format data) shift; echo "$in$1"; shift;; # base64 encoded *) pp_error "pp_macos_plist: bad argument '$1'"; shift;; esac done } pp_macos_rewrite_cpio () { typeset script script=$pp_wrkdir/cpio-rewrite.pl cat <<-'.' >$script #!/usr/bin/perl # # Filter a cpio file, applying the user/group/mode specified in %files # # A CPIO header block has octal fields at the following offset/lengths: # 0 6 magic # 6 6 dev # 12 6 ino # 18 6 mode # 24 6 uid # 30 6 gid # 36 6 nlink # 42 6 rdev # 48 11 mtime # 59 6 namesize (including NUL terminator) # 65 11 filesize # 76 -- # use strict; use warnings; no strict 'subs'; # set %uid, %gid, %mode based on %files my (%uid, %gid, %mode, %users, %groups); my %type_map = ( d => 0040000, f => 0100000, s => 0120000 ); while () { my ($type,$mode,$uid,$gid,$flags,$name) = m/^(.) (\S+) (\S+) (\S+) (\S+) (\S+)/; $mode = $type eq "f" ? "0644" : "0755" if $mode eq "-"; $uid = 0 if $uid eq "-"; $gid = 0 if $gid eq "-"; if ($uid ne "=" and $uid =~ m/\D/) { unless (exists $users{$uid}) { my @pw = getpwnam($uid) or die "bad username '$uid'"; $users{$uid} = $pw[2]; } $uid = $users{$uid}; } if ($gid ne "=" and $gid =~ m/\D/) { unless (exists $groups{$gid}) { my @gr = getgrnam($gid) or die "bad group'$gid'"; $groups{$gid} = $gr[2]; } $gid = $groups{$gid}; } $name =~ s:/$:: if $type eq "d"; $name = ".".$name."\0"; $uid{$name} = sprintf("%06o",int($uid)) unless $uid eq "="; $gid{$name} = sprintf("%06o",int($gid)) unless $gid eq "="; $mode{$name} = sprintf("%06o",oct($mode)|$type_map{$type}) unless $mode eq "="; } undef %users; undef %groups; # parse the cpio file my $hdrlen = 76; while (read(STDIN, my $header, $hdrlen)) { my ($name, $namesize, $filesize); my $filepad = 0; if ($header =~ m/^07070[12]/) { # SVR4 ASCII format, convert to ODC if ($hdrlen == 76) { # Read in rest of header and update header len for SVR4 read(STDIN, $header, 110 - 76, 76); $hdrlen = 110; } my $ino = hex(substr($header, 6, 8)) & 0x3ffff; my $mode = hex(substr($header, 14, 8)) & 0x3ffff; my $uid = hex(substr($header, 22, 8)) & 0x3ffff; my $gid = hex(substr($header, 30, 8)) & 0x3ffff; my $nlink = hex(substr($header, 38, 8)) & 0x3ffff; my $mtime = hex(substr($header, 46, 8)) & 0xffffffff; $filesize = hex(substr($header, 54, 8)) & 0xffffffff; my $dev_maj = hex(substr($header, 62, 8)); my $dev_min = hex(substr($header, 70, 8)); my $dev = &makedev($dev_maj, $dev_min) & 0x3ffff; my $rdev_maj = hex(substr($header, 78, 8)); my $rdev_min = hex(substr($header, 86, 8)); my $rdev = &makedev($rdev_maj, $rdev_min) & 0x3ffff; $namesize = hex(substr($header, 94, 8)) & 0x3ffff; read(STDIN, $name, $namesize); # Header + name is padded to a multiple of 4 bytes my $namepad = (($hdrlen + $namesize + 3) & 0xfffffffc) - ($hdrlen + $namesize); read(STDIN, my $padding, $namepad) if ($namepad); # File data is padded to be a multiple of 4 bytes $filepad = (($filesize + 3) & 0xfffffffc) - $filesize; my $new_header = sprintf("070707%06o%06o%06o%06o%06o%06o%06o%011o%06o%011o", $dev, $ino, $mode, $uid, $gid, $nlink, $rdev, $mtime, $namesize, $filesize); $header = $new_header; } elsif ($header =~ m/^070707/) { # POSIX Portable ASCII Format $namesize = oct(substr($header, 59, 6)); $filesize = oct(substr($header, 65, 11)); read(STDIN, $name, $namesize); } else { die "bad magic"; } # update uid, gid and mode (already in octal) substr($header, 24, 6) = $uid{$name} if exists $uid{$name}; substr($header, 30, 6) = $gid{$name} if exists $gid{$name}; substr($header, 18, 6) = $mode{$name} if exists $mode{$name}; print($header, $name); # check for trailer at EOF last if $filesize == 0 && $name =~ /^TRAILER!!!\0/; # copy-through the file data while ($filesize > 0) { my $seg = 8192; $seg = $filesize if $filesize < $seg; read(STDIN, my $data, $seg); print $data; $filesize -= $seg; } # If file data is padded, skip it read(STDIN, my $padding, $filepad) if ($filepad); } # pass through any padding at the end (blocksize-dependent) for (;;) { my $numread = read(STDIN, my $data, 8192); last unless $numread; print $data; } exit(0); sub makedev { (((($_[0] & 0xff)) << 24) | ($_[1] & 0xffffff)); } __DATA__ . # Append to the script the %files data cat "$@" > $script /usr/bin/perl $script || pp_error "pp_macos_rewrite_cpio error"; } pp_macos_files_bom () { typeset _l t m o g f p st owner while read t m o g f p st; do # make sure that $m is padded up to 4 digits long case "$m" in ?) m="000$m";; ??) m="00$m";; ???) m="0$m";; ?????*) pp_error "pp_macos_writebom: mode '$m' too long";; esac # convert owner,group into owner/group in octal case $o in -) o=0;; esac case $g in -) g=0;; esac owner=`pp_d2o $o`/`pp_d2o $g` case $t in f) test x"$m" = x"000-" && m=0644 echo ".$p 10$m $owner ` /usr/bin/cksum < "${pp_destdir}$p" | awk '{print $2 " " $1}'`" ;; d) test x"$m" = x"000-" && m=0755 echo ".${p%/} 4$m $owner" ;; s) test x"$m" = x"000-" && m=0755 rl=`/usr/bin/readlink "${pp_destdir}$p"` #test x"$rl" = x"$st" || # pp_error "symlink mismatch $rl != $st" echo ".$p 12$m $owner ` /usr/bin/readlink -n "${pp_destdir}$p" | /usr/bin/cksum | awk '{print $2 " " $1}'` $st" ;; esac done } pp_macos_bom_fix_parents () { perl -pe ' sub dirname { my $d=shift; $d=~s,/[^/]*$,,; $d; } sub chk { my $d=shift; &chk(&dirname($d)) if $d =~ m,/,; unless ($seen{$d}++) { # Make sure we do not override system directories if ($d =~ m:^\./(etc|var)$:) { my $tgt = "private/$1"; my ($sum, $len) = split(/\s+/, `/usr/bin/printf "$tgt" | /usr/bin/cksum /dev/stdin`); print "$d\t120755\t0/0\t$len\t$sum\t$tgt\n"; } elsif ($d eq "." || $d eq "./Library") { print "$d\t41775\t0/80\n"; } elsif ($d eq "./Applications" || $d eq "./Developer") { print "$d\t40775\t0/80\n"; } else { print "$d\t40755\t0/0\n"; } } } m/^(\S+)\s+(\d+)/; if (oct($2) & 040000) { $seen{$1}++; # directory } &chk(&dirname($1));' } pp_macos_files_size () { typeset _l t m o g f p st owner while read t m o g f p st; do case $t in f) wc -c < "${pp_destdir}$p";; s) echo 4095;; d) ;; # always seems to be zero esac done | awk '{n+=1+int($1/4096)} END {print n*4}' } pp_o2d () { awk 'BEGIN { x=0; '`echo "$1" | sed -e 's/./x=x*8+&;/g'`'print x;}' /dev/null; then rm -f "$2" /usr/bin/mkbom -i "$1" "$2" return fi # On 10.4 we have this nonsense. pp_warn "mkbom workaround: copying source files to staging area" bomstage=$pp_wrkdir/bom_stage $pp_macos_sudo /bin/mkdir "$bomstage" while IFS=' ' read path mode ugid size cksumi linkpath; do if test -h "$pp_destdir/$path"; then $pp_macos_sudo /bin/ln -s "$linkpath" "$bomstage/$path" else if test -d "$pp_destdir/$path"; then $pp_macos_sudo /bin/mkdir -p "$bomstage/$path" else $pp_macos_sudo /bin/cp "$pp_destdir/$path" "$bomstage/$path" fi $pp_macos_sudo /bin/chmod $mode "$bomstage/$path" $pp_macos_sudo /usr/sbin/chown `echo $ugid| tr / :` "$bomstage/$path" fi done <"$1" (cd $bomstage && $pp_macos_sudo mkbom . $pp_wrkdir/bom_stage.bom) || pp_error "mkbom failed" $pp_macos_sudo mv $pp_wrkdir/bom_stage.bom "$2" } pp_backend_macos () { : ${pp_macos_bundle_id:=$pp_macos_default_bundle_id_prefix$name} case "$pp_macos_pkg_type" in bundle) pp_backend_macos_bundle;; flat) pp_backend_macos_flat;; *) pp_error "unsupported package type $pp_macos_pkg_type";; esac } pp_backend_macos_bundle () { typeset pkgdir Contents Resources lprojdir svc typeset Info_plist Description_plist typeset bundle_vendor bundle_version size cmp filelists mac_version=`sw_vers -productVersion` bundle_vendor=${pp_macos_bundle_vendor:-$vendor} if test -z "$pp_macos_bundle_version"; then bundle_version=`echo "$version.0.0.0" | sed -n -e 's/[^0-9.]//g' \ -e 's/^\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/p'` else bundle_version="$pp_macos_bundle_version" fi source_version=`echo $version | sed 's/.*\.//'` # build the package layout pkgdir=$pp_wrkdir/$name.pkg Contents=$pkgdir/Contents Resources=$Contents/Resources lprojdir=$Resources/en.lproj mkdir $pkgdir $Contents $Resources $lprojdir || pp_error "Can't make package temporary directories" echo "major: 1" > $Resources/package_version echo "minor: 0" >> $Resources/package_version echo "pmkrpkg1" > $Contents/PkgInfo case $mac_version in "10.6"*) xattr -w "com.apple.TextEncoding" "macintosh;0" "$Resources/package_version" xattr -w "com.apple.TextEncoding" "macintosh;0" "$Contents/PkgInfo" ;; esac # Copy welcome file/dir for display at package install time. if test -n "$pp_macos_pkg_welcome"; then typeset sfx sfx=`echo "$pp_macos_pkg_welcome"|sed 's/^.*\.\([^\.]*\)$/\1/'` case "$sfx" in rtf|html|rtfd|txt) ;; *) sfx=txt;; esac cp -R ${pp_macos_pkg_welcome} $Resources/Welcome.$sfx fi # Copy readme file/dir for display at package install time. if test -n "$pp_macos_pkg_readme"; then typeset sfx sfx=`echo "$pp_macos_pkg_readme"|sed 's/^.*\.\([^\.]*\)$/\1/'` case "$sfx" in rtf|html|rtfd|txt) ;; *) sfx=txt;; esac cp -R ${pp_macos_pkg_readme} $Resources/ReadMe.$sfx fi # Copy license file/dir for display at package install time. if test -n "$pp_macos_pkg_license"; then typeset sfx sfx=`echo "$pp_macos_pkg_license"|sed 's/^.*\.\([^\.]*\)$/\1/'` case "$sfx" in rtf|html|rtfd|txt) ;; *) sfx=txt;; esac cp -R ${pp_macos_pkg_license} $Resources/License.$sfx fi # Add services (may modify %files) for svc in $pp_services .; do test . = "$svc" && continue pp_macos_add_service $svc done # Find file lists (%files.* includes ignore files) for cmp in $pp_components; do test -f $pp_wrkdir/%files.$cmp && filelists="$filelists${filelists:+ }$pp_wrkdir/%files.$cmp" done # compute the installed size size=`cat $filelists | pp_macos_files_size` #-- Create Info.plist Info_plist=$Contents/Info.plist pp_macos_plist \ start-plist \{ \ key CFBundleGetInfoString string \ "${pp_macos_bundle_info_string:-$version $bundle_vendor}" \ key CFBundleIdentifier string \ "${pp_macos_bundle_id}" \ key CFBundleName string "$name" \ key CFBundleShortVersionString string "$bundle_version.$source_version" \ key IFMajorVersion integer 1 \ key IFMinorVersion integer 0 \ key IFPkgFlagAllowBackRev false \ key IFPkgFlagAuthorizationAction string "RootAuthorization" \ key IFPkgFlagDefaultLocation string "/" \ key IFPkgFlagFollowLinks true \ key IFPkgFlagInstallFat true \ key IFPkgFlagInstalledSize integer $size \ key IFPkgFlagIsRequired false \ key IFPkgFlagOverwritePermissions true \ key IFPkgFlagRelocatable false \ key IFPkgFlagRestartAction string "NoRestart" \ key IFPkgFlagRootVolumeOnly true \ key IFPkgFlagUpdateInstalledLanguages false \ key IFPkgFlagUseUserMask false \ key IFPkgFormatVersion real 0.10000000149011612 \ key SourceVersion string $source_version \ \} end-plist> $Info_plist # write en.lproj/Description.plist Description_plist=$lprojdir/Description.plist pp_macos_plist \ start-plist \{ \ key IFPkgDescriptionDeleteWarning string "" \ key IFPkgDescriptionDescription string "$pp_macos_bundle_info_string" \ key IFPkgDescriptionTitle string "$name" \ key IFPkgDescriptionVersion string "$bundle_version.$source_version" \ \} end-plist > $Description_plist # write Resources/files awk '{print $6}' $filelists > $Resources/files # write package size file printf \ "NumFiles 0 InstalledSize $size CompressedSize 0 " > $Resources/$name.sizes # write Resources/preinstall for cmp in $pp_components; do if test -s $pp_wrkdir/%pre.$cmp; then if test ! -s $Resources/preinstall; then echo "#!/bin/sh" > $Resources/preinstall chmod +x $Resources/preinstall fi cat $pp_wrkdir/%pre.$cmp >> $Resources/preinstall echo : >> $Resources/preinstall fi done # write Resources/postinstall for cmp in $pp_components; do if test -s $pp_wrkdir/%post.$cmp; then if test ! -s $Resources/postinstall; then echo "#!/bin/sh" > $Resources/postinstall chmod +x $Resources/postinstall fi cat $pp_wrkdir/%post.$cmp >> $Resources/postinstall echo : >> $Resources/postinstall fi done # write Resources/postupgrade for cmp in $pp_components; do if test -s $pp_wrkdir/%postup.$cmp; then if test ! -s $Resources/postupgrade; then echo "#!/bin/sh" > $Resources/postupgrade chmod +x $Resources/postupgrade fi cat $pp_wrkdir/%postup.$cmp >> $Resources/postupgrade echo : >> $Resources/postupgrade fi done # write Resources/preremove for cmp in $pp_components; do if test -s $pp_wrkdir/%preun.$cmp; then if test ! -s $Resources/preremove; then echo "#!/bin/sh" > $Resources/preremove chmod +x $Resources/preremove fi cat $pp_wrkdir/%preun.$cmp >> $Resources/preremove echo : >> $Resources/preremove fi done # write Resources/postremove for cmp in $pp_components; do if test -s $pp_wrkdir/%postun.$cmp; then if test ! -s $Resources/postremove; then echo "#!/bin/sh" > $Resources/postremove chmod +x $Resources/postremove fi cat $pp_wrkdir/%postun.$cmp >> $Resources/postremove echo : >> $Resources/postremove fi done # write uninstall info echo "version=$version" > $Resources/uninstall if [ -n "$pp_macos_requires" ];then echo "requires=$pp_macos_requires" >> $Resources/uninstall fi . $pp_wrkdir/%fixup # Create the bill-of-materials (Archive.bom) cat $filelists | pp_macos_files_bom | sort | pp_macos_bom_fix_parents > $pp_wrkdir/tmp.bomls pp_macos_mkbom $pp_wrkdir/tmp.bomls $Contents/Archive.bom # Create the cpio archive (Archive.pax.gz) ( cd $pp_destdir && awk '{ print "." $6 }' $filelists | sed 's:/$::' | sort | /usr/bin/cpio -o | pp_macos_rewrite_cpio $filelists | gzip -9f -c > $Contents/Archive.pax.gz ) # Copy installer plugins if any if test -n "$pp_macos_installer_plugin"; then if test ! -f "$pp_macos_installer_plugin/InstallerSections.plist"; then pp_error "Missing InstallerSections.plist file in $pp_macos_installer_plugin" fi mkdir -p $pkgdir/Plugins cp -R "$pp_macos_installer_plugin"/* $pkgdir/Plugins fi test -d $pp_wrkdir/bom_stage && $pp_macos_sudo rm -rf $pp_wrkdir/bom_stage rm -f ${name}-${version}.dmg hdiutil create -fs HFS+ -srcfolder $pkgdir -volname $name ${name}-${version}.dmg } pp_backend_macos_flat () { typeset pkgdir bundledir Resources lprojdir svc typeset Info_plist Description_plist typeset bundle_vendor bundle_version size numfiles cmp filelists mac_version=`sw_vers -productVersion` bundle_vendor=${pp_macos_bundle_vendor:-$vendor} if test -z "$pp_macos_bundle_version"; then bundle_version=`echo "$version.0.0.0" | sed -n -e 's/[^0-9.]//g' \ -e 's/^\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/p'` else bundle_version="$pp_macos_bundle_version" fi source_version=`echo $version | sed 's/.*\.//'` # build the flat package layout pkgdir=$pp_wrkdir/pkg pkgfile=$name-$version.pkg bundledir=$pp_wrkdir/pkg/$pkgfile Resources=$pkgdir/Resources lprojdir=$Resources/en.lproj mkdir $pkgdir $bundledir $Resources $lprojdir || pp_error "Can't make package temporary directories" # Add services (may modify %files) for svc in $pp_services .; do test . = "$svc" && continue pp_macos_add_service $svc done # Find file lists (%files.* includes ignore files) for cmp in $pp_components; do test -f $pp_wrkdir/%files.$cmp && filelists="$filelists${filelists:+ }$pp_wrkdir/%files.$cmp" done # compute the installed size and number of files/dirs size=`cat $filelists | pp_macos_files_size` numfiles=`cat $filelists | wc -l` numfiles="${numfiles##* }" # Write Distribution file cat <<-. >$pkgdir/Distribution $name $version . if test -n "$pp_macos_pkg_welcome"; then cp -R "${pp_macos_pkg_welcome}" $Resources echo " " >>$pkgdir/Distribution fi if test -n "$pp_macos_pkg_readme"; then cp -R "${pp_macos_pkg_readme}" $Resources echo " " >>$pkgdir/Distribution fi if test -n "$pp_macos_pkg_license"; then cp -R "${pp_macos_pkg_license}" $Resources echo " " >>$pkgdir/Distribution fi cat <<-. >>$pkgdir/Distribution #$pkgfile . # write scripts archive # XXX - missing preupgrade, preflight, postflight mkdir $pp_wrkdir/scripts for cmp in $pp_components; do if test -s $pp_wrkdir/%pre.$cmp; then if test ! -s $pp_wrkdir/scripts/preinstall; then echo "#!/bin/sh" > $pp_wrkdir/scripts/preinstall chmod +x $pp_wrkdir/scripts/preinstall fi cat $pp_wrkdir/%pre.$cmp >> $pp_wrkdir/scripts/preinstall echo : >> $pp_wrkdir/scripts/preinstall fi if test -s $pp_wrkdir/%post.$cmp; then if test ! -s $pp_wrkdir/scripts/postinstall; then echo "#!/bin/sh" > $pp_wrkdir/scripts/postinstall chmod +x $pp_wrkdir/scripts/postinstall fi cat $pp_wrkdir/%post.$cmp >> $pp_wrkdir/scripts/postinstall echo : >> $pp_wrkdir/scripts/postinstall fi if test -s $pp_wrkdir/%postup.$cmp; then if test ! -s $pp_wrkdir/scripts/postupgrade; then echo "#!/bin/sh" > $pp_wrkdir/scripts/postupgrade chmod +x $pp_wrkdir/scripts/postupgrade fi cat $pp_wrkdir/%postup.$cmp >> $pp_wrkdir/scripts/postupgrade echo : >> $pp_wrkdir/scripts/postupgrade fi # XXX - not supported if test -s $pp_wrkdir/%preun.$cmp; then if test ! -s $pp_wrkdir/scripts/preremove; then echo "#!/bin/sh" > $pp_wrkdir/scripts/preremove chmod +x $pp_wrkdir/scripts/preremove fi cat $pp_wrkdir/%preun.$cmp >> $pp_wrkdir/scripts/preremove echo : >> $pp_wrkdir/scripts/preremove fi # XXX - not supported if test -s $pp_wrkdir/%postun.$cmp; then if test ! -s $pp_wrkdir/scripts/postremove; then echo "#!/bin/sh" > $pp_wrkdir/scripts/postremove chmod +x $pp_wrkdir/scripts/postremove fi cat $pp_wrkdir/%postun.$cmp >> $pp_wrkdir/scripts/postremove echo : >> $pp_wrkdir/scripts/postremove fi done if test "`echo $pp_wrkdir/scripts/*`" != "$pp_wrkdir/scripts/*"; then # write scripts archive, scripts are mode 0755 uid/gid 0/0 # resetting the owner and mode is not strictly required ( cd $pp_wrkdir/scripts || pp_error "Can't cd to $pp_wrkdir/scripts" rm -f $pp_wrkdir/tmp.files.scripts for s in *; do echo "f 0755 0 0 - ./$s" >>$pp_wrkdir/tmp.files.scripts done find . -type f | /usr/bin/cpio -o | pp_macos_rewrite_cpio $pp_wrkdir/tmp.files.scripts | gzip -9f -c > $bundledir/Scripts ) fi # Write PackageInfo file cat <<-. >$bundledir/PackageInfo . if test -s $bundledir/Scripts; then echo " " >>$bundledir/PackageInfo for s in preflight postflight preinstall postinstall preupgrade postupgrade; do if test -s "$pp_wrkdir/scripts/$s"; then echo " <$s file=\"$s\"/>" >>$bundledir/PackageInfo fi done echo " " >>$bundledir/PackageInfo fi cat <<-. >>$bundledir/PackageInfo . . $pp_wrkdir/%fixup # Create the bill-of-materials (Bom) cat $filelists | pp_macos_files_bom | sort | pp_macos_bom_fix_parents > $pp_wrkdir/tmp.bomls pp_macos_mkbom $pp_wrkdir/tmp.bomls $bundledir/Bom # Create the cpio payload ( cd $pp_destdir || pp_error "Can't cd to $pp_destdir" awk '{ print "." $6 }' $filelists | sed 's:/$::' | sort | /usr/bin/cpio -o | pp_macos_rewrite_cpio $filelists | gzip -9f -c > $bundledir/Payload ) awk '{print $6}' $filelists > $name.files # Copy installer plugins if any if test -n "$pp_macos_installer_plugin"; then if test ! -f "$pp_macos_installer_plugin/InstallerSections.plist"; then pp_error "Missing InstallerSections.plist file in $pp_macos_installer_plugin" fi mkdir -p $pkgdir/Plugins cp -R "$pp_macos_installer_plugin"/* $pkgdir/Plugins fi test -d $pp_wrkdir/bom_stage && $pp_macos_sudo rm -rf $pp_wrkdir/bom_stage # Create the flat package with xar (like pkgutil --flatten does) # Note that --distribution is only supported by macOS 10.6 and above xar_flags="--compression=bzip2 --no-compress Scripts --no-compress Payload" case $mac_version in "10.5"*) ;; *) xar_flags="$xar_flags --distribution";; esac (cd $pkgdir && /usr/bin/xar $xar_flags -cf "../$pkgfile" *) echo "version=$version" > $name.uninstall } pp_backend_macos_cleanup () { : } pp_backend_macos_names () { case "$pp_macos_pkg_type" in bundle) echo ${name}.pkg;; flat) echo ${name}-${version}.pkg;; *) pp_error "unsupported package type $pp_macos_pkg_type";; esac } pp_backend_macos_install_script () { echo '#!/bin/sh' typeset pkgname platform pkgname="`pp_backend_macos_names`" platform="`pp_backend_macos_probe`" pp_install_script_common cat <<. test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo "$pp_components" ;; list-services) test \$# -eq 0 || usage \$op echo "$pp_services" ;; list-files) test \$# -ge 1 || usage \$op echo \${PP_PKGDESTDIR:-.}/"$pkgname" ;; install) test \$# -ge 1 || usage \$op vol=/Volumes/pp\$\$ pkg=\$vol/${name}-${version}.pkg hdiutil attach -readonly -mountpoint \$vol \ \${PP_PKGDESTDIR:-.}/"$pkgname" trap "hdiutil detach \$vol" 0 installer -pkginfo -pkg \$pkg installer -verbose -pkg \$pkg -target / ;; uninstall) test \$# -ge 1 || usage \$op # XXX echo "Uninstall not implemented" >&2 exit 1;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do # XXX echo "\${op} not implemented" >&2 ec=1 done exit \$ec ;; print-platform) echo "$platform" ;; *) usage;; esac . } pp_backend_macos_init_svc_vars () { pp_macos_start_services_after_install=true pp_macos_service_name= pp_macos_default_service_id_prefix="com.quest.rc." pp_macos_service_id= pp_macos_service_user= pp_macos_service_group= pp_macos_service_initgroups= pp_macos_service_umask= pp_macos_service_cwd= pp_macos_service_nice= pp_macos_svc_plist_file= } pp_macos_launchd_plist () { typeset svc svc_id svc="$1" svc_id="$2" set -- $cmd if [ -n "$pp_macos_svc_plist_file" ]; then echo "## Launchd plist file already defined at $pp_macos_svc_plist_file" return fi echo "## Generating the launchd plist file for $svc" pp_macos_svc_plist_file="$pp_wrkdir/$svc.plist" cat <<-. > $pp_macos_svc_plist_file Label $svc_id ProgramArguments . while test $# != 0; do printf " $1\n" >> $pp_macos_svc_plist_file shift done cat <<-. >> $pp_macos_svc_plist_file KeepAlive . if test -n "$pp_macos_service_user"; then printf " UserName\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_user\n" >> $pp_macos_svc_plist_file fi if test -n "$pp_macos_service_group"; then printf " GroupName\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_group\n" >> $pp_macos_svc_plist_file fi if test -n "$pp_macos_service_initgroups"; then printf " InitGroups\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_initgroups\n" >> $pp_macos_svc_plist_file fi if test -n "$pp_macos_service_umask"; then printf " Umask\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_umask\n" >> $pp_macos_svc_plist_file fi if test -n "$pp_macos_service_cwd"; then printf " WorkingDirectory\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_cwd\n" >> $pp_macos_svc_plist_file fi if test -n "$pp_macos_service_nice"; then printf " Nice\n" >> $pp_macos_svc_plist_file printf " $pp_macos_service_nice\n" >> $pp_macos_svc_plist_file fi cat <<-. >> $pp_macos_svc_plist_file . } pp_macos_add_service () { typeset svc svc_id plist_file plist_dir pp_load_service_vars "$1" svc=${pp_macos_service_name:-$1} svc_id=${pp_macos_service_id:-$pp_macos_default_service_id_prefix$svc} #-- create a plist file for svc pp_macos_launchd_plist "$svc" "$svc_id" #-- copy the plist file into place and add to %files plist_dir="/Library/LaunchDaemons" plist_file="$plist_dir/$svc_id.plist" mkdir -p "$pp_destdir/$plist_dir" cp "$pp_macos_svc_plist_file" "$pp_destdir/$plist_file" pp_add_file_if_missing "$plist_file" #-- add code to start the service on install & upgrade ${pp_macos_start_services_after_install} && <<-. >> $pp_wrkdir/%post.$svc # start service '$svc' automatically after install launchctl load "$plist_file" . ${pp_macos_start_services_after_install} && <<-. >> $pp_wrkdir/%postup.$svc # start service '$svc' automatically after upgrade # This is necessary if the service is new since the previous version. # XXX: Does launchd automatically reload an service if its binary # is replaced? launchctl load "$plist_file" . } pp_backend_macos_probe () { typeset name vers arch case `sw_vers -productName` in "macOS") name="macos";; "Mac OS X") name="macos";; *) name="unknown";; esac vers=`sw_vers -productVersion | awk -F. '{ printf "%d%02d\n", $1, $2 }'` arch=`arch` echo "$name$vers-$arch" } pp_backend_macos_vas_platforms () { echo "osx" # XXX non-really sure what they do.. it should be "macos" } pp_backend_macos_function () { case "$1" in _pp_macos_search_unused) cat<<'.';; # Find an unused value in the given path # args: path attribute minid [maxid] pp_tmp_val=$3 while :; do test $pp_tmp_val -ge ${4:-999999} && return 1 /usr/bin/dscl . -search "$1" "$2" $pp_tmp_val | grep . > /dev/null || break pp_tmp_val=`expr $pp_tmp_val + 1` done echo $pp_tmp_val . pp_mkgroup:depends) echo _pp_macos_search_unused;; pp_mkgroup) cat<<'.';; set -e /usr/bin/dscl . -read /Groups/"$1" >/dev/null 2>&1 && return pp_tmp_gid=`_pp_macos_search_unused /Groups PrimaryGroupID 100` /usr/bin/dscl . -create /Groups/"$1" /usr/bin/dscl . -create /Groups/"$1" PrimaryGroupID $pp_tmp_gid /usr/bin/dscl . -create /Groups/"$1" RealName "Group $1" /usr/bin/dscl . -create /Groups/"$1" GroupMembership "" /usr/bin/dscl . -create /Groups/"$1" Password '*' . pp_mkuser:depends) echo pp_mkgroup _pp_macos_search_unused;; pp_mkuser) cat<<'.';; set -e /usr/bin/dscl . -read /Users/"$1" >/dev/null 2>&1 && return pp_tmp_uid=`_pp_macos_search_unused /Users UniqueID 100` pp_mkgroup "${2:-$1}" pp_tmp_gid=`/usr/bin/dscl . -read /Groups/"${2:-$1}" \ PrimaryGroupID | awk '{print $2}'` /usr/bin/dscl . -create /Users/"$1" /usr/bin/dscl . -create /Users/"$1" PrimaryGroupID $pp_tmp_gid /usr/bin/dscl . -create /Users/"$1" NFSHomeDirectory \ "${3:-/var/empty}" /usr/bin/dscl . -create /Users/"$1" UserShell \ "${4:-/usr/bin/false}" /usr/bin/dscl . -create /Users/"$1" RealName "$1" /usr/bin/dscl . -create /Users/"$1" UniqueID $pp_tmp_uid /usr/bin/dscl . -create /Users/"$1" Password '*' . pp_havelib) cat<<'.';; # (use otool -L to find dependent libraries) for pp_tmp_dir in `echo "${3:+$3:}/usr/local/lib:/lib:/usr/lib" | tr : ' '`; do test -r "$pp_tmp_dir/lib$1{$2:+.$2}.dylib" && return 0 done return 1 . *) false;; esac } pp_platforms="$pp_platforms inst" pp_backend_inst_detect () { case "$1" in IRIX*) return 0;; *) return 1;; esac } pp_backend_inst_init () { pp_readlink_fn=pp_ls_readlink } pp_backend_inst_create_idb() { typeset t m o g f p st while read t m o g f p st; do if test x"$o" = x"-"; then o="root" fi if test x"$g" = x"-"; then g="sys" fi case "$t" in f) test x"$m" = x"-" && m=444 echo "f 0$m $o $g $p $p $name.sw.base" ;; d) test x"$m" = x"-" && m=555 echo "d 0$m $o $g $p $p $name.sw.base" ;; s) test x"$m" = x"-" && m=777 test x"$m" = x"777" || pp_warn "$p: invalid mode $m for symlink, should be 777 or -" echo "l 0$m $o $g $p $p $name.sw.base symval($st)" ;; esac done } pp_backend_inst_create_spec() { echo "product $name" echo " id \"${summary}. Version: ${version}\"" echo " image sw" echo " id \"Software\"" echo " version $version" echo " order 9999" echo " subsys base" echo " id \"Base Software\"" echo " replaces self" echo " exp $name.sw.base" echo " endsubsys" echo " endimage" echo "endproduct" } pp_backend_inst () { curdir=`pwd` cd "$pp_opt_wrkdir" # initialize pp_inst_tardist=tardist pp_inst_spec=${name}.spec pp_inst_idb=${name}.idb rm -rf $pp_inst_tardist $pp_inst_spec $pp_inst_idb mkdir -p $pp_inst_tardist # Create idb file (for _cmp in $pp_components; do cat %files.$_cmp | sort +4u -6 | pp_backend_inst_create_idb done) >> $pp_inst_idb pp_backend_inst_create_spec >> $pp_inst_spec # Generate tardist gendist -verbose -all -root / -source $pp_opt_destdir -idb $pp_inst_idb -spec $pp_inst_spec -dist $pp_inst_tardist $name tar -cvf `pp_backend_inst_names` $pp_inst_tardist cd "$curdir" } pp_backend_inst_cleanup () { : } pp_backend_inst_names () { echo ${name}-${version}.tardist } pp_backend_inst_install_script () { : } pp_backend_inst_function () { echo false } pp_backend_inst_init_svc_vars () { : } pp_backend_inst_probe () { cpu=`hinv|sed -n '/^CPU/{s/000 /k /;s/^CPU: //;s/ Process.*//;s/^MIPS //;p;q;}'|tr A-Z a-z` echo irix`uname -r`-$cpu } pp_backend_inst_vas_platforms () { echo "irix-65" } pp_platforms="$pp_platforms null" pp_backend_null_detect () { ! : } pp_backend_null_init () { : } pp_backend_null () { : } pp_backend_null_cleanup () { : } pp_backend_null_names () { : } pp_backend_null_install_script () { : } pp_backend_null_function () { echo false } pp_backend_null_init_svc_vars () { : } pp_backend_null_probe () { echo unknown-unknown } pp_backend_null_vas_platforms () { : } pp_platforms="$pp_platforms bsd" pp_bsd_munge_text () { # Insert a leading space on each line, replace blank lines with a #space followed by a full-stop. test -z "$1" && pp_die "pp_bsd_munge_text requires a parameter" echo ${1} | sed "s,^\(.*\)$, \1, " | sed "s,^[ \t]*$, .,g" } pp_backend_bsd_detect () { test x"$1" = x"FreeBSD" } pp_backend_bsd_init () { # Get the OS revision pp_bsd_detect_os # Get the arch (i386/amd64) pp_bsd_detect_arch pp_bsd_name= pp_bsd_version= pp_bsd_origin= pp_bsd_comment= pp_bsd_arch= pp_bsd_abi= pp_bsd_www= pp_bsd_maintainer= pp_bsd_prefix="/usr/local/" pp_bsd_desc= pp_bsd_message= # pp_bsd_category must be in array format comma separated # pp_bsd_category=[security,network] pp_bsd_category= # pp_bsd_licenselogic can be one of the following: single, and, or unset pp_bsd_licenselogic= # pp_bsd_licenses must be in array format comma separated # pp_bsd_licenses=[GPLv2,MIT] pp_bsd_licenses= # pp_bsd_annotations. These can be any key: value pair # key must be separated by a : # keyvalue pairs must be comma separated # pp_bsd_annotations="repo_type: binary, somekey: somevalue" # since all packages created by PolyPackage will be of type binary # let's just set it now. pp_bsd_annotations="repo_type: binary" pp_bsd_dbg_pkgname="debug" pp_bsd_dev_pkgname="devel" pp_bsd_doc_pkgname="doc" # Make sure any programs we require are installed pp_bsd_check_required_programs } pp_bsd_cmp_full_name () { typeset prefix prefix="${pp_bsd_name:-$name}" case "$1" in run) echo "${prefix}" ;; dbg) echo "${prefix}-${pp_bsd_dbg_pkgname}";; dev) echo "${prefix}-${pp_bsd_dev_pkgname}";; doc) echo "${prefix}-${pp_bsd_doc_pkgname}";; *) pp_error "unknown component '$1'"; esac } pp_bsd_check_required_programs () { local p needed notfound ok needed= notfound= # list of programs FreeBSD needs in order to create a binary package for prog in ${pp_bsd_required_programs:-"pkg"} do if which $prog 2>&1 > /dev/null; then pp_debug "$prog: found" else pp_debug "$prog: not found" case "$prog" in pkg) p=pkg;; *) pp_die "Unexpected pkg tool $prog";; esac notfound="$notfound $prod" pp_contains "$needed" "$p" || needed="$needed $p" fi done if [ -n "$notfound" ]; then pp_error "cannot find these programs: $notfound" pp_error "please install these packages: $needed" fi } pp_bsd_detect_os () { typeset revision pp_bsd_os=`uname -s` revision=`uname -r` pp_bsd_os_rev=`echo $revision | awk -F '-' '{print $1}'` } pp_bsd_detect_arch() { pp_bsd_platform="`uname -m`" case $pp_bsd_platform in amd64) pp_bsd_platform_std=x86_64;; i386) pp_bsd_platform_std=i386;; *) pp_bsd_platform_std=unknown;; esac } pp_bsd_label () { local label arg label="$1"; shift for arg do test -z "$arg" || echo "$label: $arg" done } pp_bsd_make_annotations () { test -z $1 && pp_die "pp_bsd_make_annotations requires a parameter" manifest=$1 # Add annotations. These can be any key: value pair # key must be separated by a : # key:value pairs must be comma separated. if test -n "$pp_bsd_annotations"; then pp_debug "Processing annotations:" pp_bsd_label "annotations" "{" >> $manifest SAVEIFS=$IFS IFS=, for annotate in $pp_bsd_annotations; do # Remove any spaces at the start of the line annotate=`echo $annotate | sed 's/^ *//'` pp_debug " $annotate" echo " $annotate" >> $manifest done IFS=$SAVEIFS echo "}" >> $manifest fi } pp_bsd_make_depends() { typeset package origin version cmp=$1 manifest=$2 if test -s $pp_wrkdir/%depend.${cmp}; then echo "deps: {" >> $manifest cat $pp_wrkdir/%depend.${cmp} | while read package origin version; do if test x != x$package; then pp_debug "Processing dependency: $package" if test x != x$origin -a x != x$version; then pp_debug " $package: {origin: \"$origin\", version: \"$version\"}" echo " $package: {origin: \"$origin\", version: \"$version\"}" >> $manifest else pp_warn "Dependency $package is missing origin or version or both" fi fi done echo "}" >> $manifest fi } pp_bsd_make_messages () { test -z $1 && pp_die "pp_bsd_make_messages requires a parameter" manifest=$1 pp_debug "Processing messages" # Empty messages: [ ] is OK in the manifest pp_bsd_label "messages" "[" >> $manifest # Look for a single message in the variable pp_bsd_message if test -n "$pp_bsd_message"; then echo " { message: \"`pp_bsd_munge_text "$pp_bsd_message"`\" }," >> $manifest fi local a=1 # Look for messages in the variables pp_bsd_message_[1..n] var="pp_bsd_messages_1" while [ -n "${!var}" ]; do echo " { message: \"`pp_bsd_munge_text "${!var}"`\" }," >> $manifest a=`expr $a + 1` var="pp_bsd_messages_$a" done echo "]" >> $manifest } pp_bsd_make_manifest() { local cmp manifest cmp="$1" manifest="$2" package_name=`pp_bsd_cmp_full_name $cmp` # Required for pkg +MANIFEST cat <<-. >> $manifest name: "${package_name}" version: "${pp_bsd_version:-$version}" origin: "${pp_bsd_origin}" www: "${pp_bsd_www}" desc: "`pp_bsd_munge_text "${pp_bsd_desc:-$description}"`" comment: "${pp_bsd_comment:-$summary}" maintainer: "${pp_bsd_maintainer}" prefix: "${pp_bsd_prefix}" . # Optional, so if they are not included in the pkg-product.pp file then do not create the label pp_bsd_label "categories" "${pp_bsd_categories}" >> $manifest pp_bsd_label "arch" "${pp_bsd_arch}" >> $manifest pp_bsd_label "abi" "${pp_bsd_abi}" >> $manifest pp_bsd_label "licenselogic" "${pp_bsd_licenselogic}" >> $manifest pp_bsd_label "licenses" "${pp_bsd_licenses}" >> $manifest pp_bsd_make_annotations $manifest pp_bsd_make_depends $cmp $manifest pp_bsd_make_messages $manifest } pp_bsd_fakeroot () { if test -s $pp_wrkdir/fakeroot.save; then fakeroot -i $pp_wrkdir/fakeroot.save -s $pp_wrkdir/fakeroot.save "$@" else fakeroot -s $pp_wrkdir/fakeroot.save "$@" fi } pp_bsd_make_data() { # t = file type # m = file mode # o = file owner # g = file group # f = ? # p = file path # st = file link # # EXAMPLE: f 755 root httpd v /usr/bin/hello goodbye # -> /usr/bin/hello: {uname: root, gname: httpd, perm: 755 } goodbye typeset _l t m o g f p st datadir cmp=$1 datadir=$pp_wrkdir/`pp_bsd_cmp_full_name $cmp` local path outfilelist="$pp_wrkdir/files.list.$cmp" outdirslist="$pp_wrkdir/dirs.list.$cmp" pp_debug "Processing $pp_wrkdir/%file.${cmp}" echo "files: {" > $outfilelist echo "directories: {" > $outdirslist cat $pp_wrkdir/%files.${cmp} | while read t m o g f p st; do test x"$o" = x"-" && o="${pp_bsd_defattr_uid:-root}" test x"$g" = x"-" && g="${pp_bsd_defattr_gid:-wheel}" path=$p case "$t" in f) # Files # For now just skip the file if it is volatile, we will need to remove it in the pre uninstall script if [ x"$f" != x"v" ]; then # If the directory doesn't exist where we are going to copy this file, then create it first if [ ! -d `dirname "$datadir$path"` ]; then pp_debug "creating directory `dirname "$datadir$path"`" mkdir -p `dirname "$datadir$path"` fi pp_debug "install -D $datadir -o $o -g $g -h sha256 -m ${m} -v $pp_destdir$p $datadir$path"; pp_bsd_fakeroot install -D $datadir -o $o -g $g -h sha256 -m ${m} -v $pp_destdir$p $datadir$path; echo " \"$path\": \"-\", \"$path\": {uname: $o, gname: $g, perm: ${m}}" >> $outfilelist; else pp_warn "file $f was marked as volatile, skipping" fi; ;; d) # Directories pp_debug "install -D $datadir -o $o -g $g -m ${m} -d -v $datadir$path"; pp_bsd_fakeroot install -D $datadir -o $o -g $g -m ${m} -d -v $datadir$path; echo " \"$path\": \"-\", \"$path\": {uname: $o, gname: $g, perm: ${m}}" >> $outdirslist; ;; s) # Symlinks pp_debug "Found symlink: $datadir$path"; # Remove leading / rel_p=`echo $p | sed s,^/,,` (cd $datadir; ln -sf $st $rel_p); # Do we care if the file doesn't exist? Just symnlink it regardless and throw a warning? This will be important in the case # where we depend on other packages to be installed and will be using the libs from that package. if [ ! -e "$datadir$path" ]; then pp_warn "$datadir$path does not exist" fi echo " \"$path\": \"$st\"" >> $outfilelist; ;; *) pp_error "Unsupported data file type: %t";; esac done echo "}" >> $outfilelist echo "}" >> $outdirslist cat $outfilelist >> $manifest cat $outdirslist >> $manifest pp_debug "Finished processing $pp_wrkdir/%file.${cmp}" } pp_bsd_makebsd() { typeset cmp typeset package_build_dir local manifest postinstall preinstall preuninstall postuninstall preupgrade postupgrade cmp="$1" if test -z "$pp_bsd_platform"; then pp_error "Unknown BSD architecture" return 1 fi _subname=`pp_bsd_cmp_full_name $cmp` package_build_dir=$pp_wrkdir/$_subname manifest="$package_build_dir/+MANIFEST" postinstall="$package_build_dir/+POST_INSTALL" preinstall="$package_build_dir/+PRE_INSTALL" preuninstall="$package_build_dir/+PRE_DEINSTALL" postuninstall="$package_build_dir/+POST_DEINSTALL" preupgrade="$package_build_dir/+PRE_UPGRADE" postupgrade="$package_build_dir/+POST_UPGRADE" # Create package dir mkdir -p $package_build_dir pp_bsd_make_manifest $cmp $manifest pp_bsd_make_data $cmp pp_debug "Processing pre/post install scripts" if test -s $pp_wrkdir/%pre.$cmp; then pp_debug "Found %pre.$cmp" { cat "$pp_wrkdir/%pre.$cmp" } > $preinstall pp_debug "Created $preinstall" fi if test -s $pp_wrkdir/%post.$cmp; then pp_debug "Found %post.$cmp" { echo "# Post install script for " cat "$pp_wrkdir/%post.$cmp" } > $postinstall pp_debug "Created $postinstall" fi pp_debug "Processing pre/post uninstall scripts" if test -s $pp_wrkdir/%preun.$cmp; then pp_debug "Found %preun.$cmp" { echo "# Pre uninstall script for ${pp_bsd_name:-$name}" cat "$pp_wrkdir/%preun.$cmp" } > $preuninstall pp_debug "Created pkg $preuninstall" fi if test -s $pp_wrkdir/%postun.$cmp; then pp_debug "Found %postun.$cmp" { echo "# Post uninstall script for ${pp_bsd_name:-$name}" cat "$pp_wrkdir/%postun.$cmp" } > $postuninstall pp_debug "Created $postuninstall" fi if test -s $pp_wrkdir/%preup.$cmp; then pp_debug "Found %preup.$cmp" { echo "# Pre upgrade script for ${pp_bsd_name:-$name}" cat "$pp_wrkdir/%preup.$cmp" } > $preupgrade pp_debug "Created pkg $preupgrade" fi if test -s $pp_wrkdir/%postup.$cmp; then pp_debug "Found %postup.$cmp" { echo "# Post upgrade script for ${pp_bsd_name:-$name}" cat "$pp_wrkdir/%postup.$cmp" } > $postupgrade pp_debug "Created $postupgrade" fi } pp_backend_bsd() { #get-files-dir-entries #create-manifest #create-preuninstall #create-postinstall #create-package # pp_bsd_handle_services for cmp in $pp_components do _subname=`pp_bsd_cmp_full_name $cmp` pp_debug "Generating packaging specific files for $_subname" pp_bsd_makebsd $cmp done # call this to fixup any files before creating the actual packages . $pp_wrkdir/%fixup for cmp in $pp_components do _subname=`pp_bsd_cmp_full_name $cmp` package_build_dir=$pp_wrkdir/$_subname # Build the actual packages now pp_debug "Building FreeBSD $_subname" pp_debug "Running package create command: pkg create -m $package_build_dir -r $pp_wrkdir/`pp_bsd_cmp_full_name $cmp` -o $pp_wrkdir" pp_bsd_fakeroot pkg create -m $package_build_dir -r $pp_wrkdir/`pp_bsd_cmp_full_name $cmp` -o $pp_wrkdir -v done } pp_bsd_name () { typeset cmp="${1:-run}" echo `pp_bsd_cmp_full_name $cmp`"-${pp_bsd_version:-$version}.txz" } pp_backend_bsd_names () { for cmp in $pp_components; do echo `pp_bsd_cmp_full_name $cmp`"-${pp_bsd_version:-$version}.txz" done } pp_backend_bsd_cleanup () { : } pp_backend_bsd_probe () { echo "${pp_bsd_os}-${pp_bsd_platform_std}" echo "${pp_bsd_os}${pp_bsd_os_rev}-${pp_bsd_platform_std}" } pp_backend_bsd_vas_platforms() { case "${pp_bsd_platform_std}" in x86_64) echo "FreeBSD-x86_64.txz FreeBSD-i386.txz";; i386) echo "FreeBSD-i386.txz";; *) pp_die "unknown architecture $pp_bsd_platform_std";; esac } pp_backend_bsd_install_script () { typeset cmp _cmp_full_name echo "#!/bin/sh" pp_install_script_common cat <<. cmp_to_pkgname () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo " $cmp) echo '`pp_bsd_cmp_full_name $cmp`';;" done cat <<. *) usage;; esac done } cmp_to_pathname () { test x"\$*" = x"all" && set -- $pp_components for cmp do case \$cmp in . for cmp in $pp_components; do echo " $cmp) echo \${PP_PKGDESTDIR:-.}/'`pp_bsd_name $cmp`';;" done cat <<. *) usage;; esac done } test \$# -eq 0 && usage op="\$1"; shift case "\$op" in list-components) test \$# -eq 0 || usage \$op echo $pp_components ;; list-services) test \$# -eq 0 || usage \$op echo $pp_services ;; list-files) test \$# -ge 1 || usage \$op cmp_to_pathname "\$@" ;; install) test \$# -ge 1 || usage \$op pkg add \`cmp_to_pathname "\$@"\` ;; uninstall) test \$# -ge 1 || usage \$op pkg remove \`cmp_to_pkgname "\$@"\`; : ;; start|stop) test \$# -ge 1 || usage \$op ec=0 for svc do /etc/rc.d/\$svc \$op || ec=1 done exit \$ec ;; print-platform) test \$# -eq 0 || usage \$op echo "${pp_bsd_os}-${pp_bsd_platform}" echo '`pp_backend_bsd_probe`' ;; *) usage ;; esac . } pp_backend_bsd_init_svc_vars () { svc_process_regex="${pp_bsd_svc_process_regex}" svc_description=$summary svc_init_prefix="${pp_bsd_prefix}" svc_init_filename="${pp_bsd_svc_init_filename}" # == $svc svc_init_filepath="${pp_bsd_svc_init_filepath}" # == $pp_bsd_prefix/etc/rc.d/ by default bsd_svc_before="${pp_bsd_svc_before}" bsd_svc_require="${pp_bsd_svc_require}" bsd_svc_keyword="${pp_bsd_svc_keyword}" } pp_bsd_service_make_init_info() { local svc=$1 local out=$2 cat <<-. >$out #!/bin/sh # # FreeBSD Script Header Detail # # PROVIDE: $svc . if [ ! -z "$bsd_svc_before" ]; then cat <<-. >>$out # BEFORE: $bsd_svc_before . fi if [ ! -z "$bsd_svc_require" ]; then cat <<-. >>$out # REQUIRE: $bsd_svc_require . fi if [ ! -z "$bsd_svc_keyword" ]; then cat <<-. >>$out # KEYWORD: $bsd_svc_keyword . fi cat <<-'.' >>$out ### END INIT INFO . } pp_bsd_service_make_init_set_vars() { local svc=$1 local out=$2 svc_command="$cmd" svc_pre_command="${pp_bsd_svc_pre_command}" svc_pre_command_args="${pp_bsd_svc_pre_command_args}" local run_command="${svc_pre_command:-$svc_command}" local run_pre_command_args="${svc_pre_command:+"${svc_pre_command_args}"}" local run_post_command_args="${svc_command:+"${svc_command_args}"}" local run_post_command_without_pre_command="${svc_pre_command:+"$svc_command"}" local run_post_command_with_args="${run_post_command_without_pre_command}${run_post_command_args:+" $run_post_command_args"}" local run_command_args="${run_pre_command_args:+"$run_pre_command_args"}${run_post_command_with_args:+" $run_post_command_with_args"}" # https://www.freebsd.org/cgi/man.cgi?query=rc.subr cat <<-. >>$out # FreeBSD rc subroutines . /etc/rc.subr # 0: Not running. # 1: Running normally # 2: Running, but no PID file. # 3: Running, but PID file doesn't match running processes. # If the PID file is found but no process, the file is removed and 0 is returned. DAEMON_RUNNING=0 name="$svc" desc="${svc_description:-\$name}" start_cmd="\${name}_start" status_cmd="\${name}_status" stop_cmd="\${name}_stop" # Loads any variables set in /etc/rc.conf.d/\$name load_rc_config \$name : \${${svc}_enable:="Yes"} : \${${svc}_pidfile:="${pidfile:-/var/run/\${name\}.pid}"} : \${${svc}_args:="$run_command_args"} : \${${svc}_cmd:="$run_command"} # Regex used in the pp_check_daemon_running ps check to find our running processe(s) # If it's set in /etc/rc.conf.d/\$name this will be used first # then check if pp_bsd_svc_process_regex is set, finally set to the \${name}_cmd # When set to \${name}_cmd pp_check_daemon_running will only find the parent process pid : \${${svc}_process_regex:="${pp_bsd_svc_process_regex:-${cmd}}"} # For additional information about the rc.subr see: # https://www.freebsd.org/cgi/man.cgi?query=rc.subr rcvar="\${name}_enable" pidfile=\${${svc}_pidfile} command="\$${svc}_cmd" command_args="\$${svc}_args" . } pp_bsd_service_make_init_body() { local svc=$1 local out=$2 cat<<-'.' >>$out pp_exec_cmd() { (eval $command $command_args) } pp_success_msg () { echo ${1:+"$*:"} OK; } pp_failure_msg () { echo ${1:+"$*:"} FAIL; } pp_warning_msg () { echo ${1:+"$*:"} WARNING; } #-- prints a status message pp_msg () { echo -n "$*: "; } # Kills process $1. # First a sigterm, then wait up to 10 seconds # before issuing a sig kill. pp_signal () { # Kill the processes the nice way first if [ -z "$1" ]; then # No pid file. Use the list from pp_check_daemon_running kill $PROCESSES 2>/dev/null else kill $1 2>/dev/null fi count=1 #Check to make sure the processes died, if not kill them the hard way while [ $count -le 10 ]; do sleep 1 pp_check_daemon_running if [ $DAEMON_RUNNING -eq 0 ]; then break; fi if [ $count -eq 1 ]; then # We tried killing the pid associated to the pidfile, now try the ones we found from pp_check_daemon_running kill $PROCESSES 2>/dev/null fi count=`expr $count + 1` done # Check one more time to make sure we got them all if [ $DAEMON_RUNNING -ne 0 ]; then # These guys don't want to go down the nice way, now just kill them kill -9 $PROCESSES 2>/dev/null fi # make sure to remove the pidfile rm -f $pidfile } # Check to see if the daemon process is running # Sets the PROCESSES global variable with all pids that match # ${name}_process_regex # Sets global variable DAEMON_RUNNING to one of the following: # 0: Not Running # 1: Running normally # 2: Running, but no PID file # 3: Running, but PID file doesn't match running processes. # pp_check_daemon_running() { DAEMON_RUNNING=0 . cat<<-. >>$out PROCESSES="\`eval ps -axo pid,args | grep "\${${svc}_process_regex}" | grep -v grep | awk '{print \$1}'\`" . cat<<-'.' >>$out if [ -f $pidfile ]; then if [ ! -z "$PROCESSES" ]; then PARENT_PID=`cat $pidfile 2>/dev/null` PPROCESS=`echo $PROCESSES | grep "${PARENT_PID:-"NOPID"}"` if [ $? -eq 0 ]; then DAEMON_RUNNING=1 else DAEMON_RUNNING=3 fi else rm -r $pidfile fi else if [ ! -z "$PROCESSES" ]; then DAEMON_RUNNING=2 fi fi } . cat <<-. >>$out # starts the service ${svc}_start() . cat <<-'.' >>$out { pp_msg "Starting ${desc}" pp_check_daemon_running if [ $DAEMON_RUNNING -eq 0 ]; then pp_exec_cmd RETVAL=$? if [ $RETVAL -eq 0 ]; then pp_success_msg else pp_failure_msg "cannot start" fi else if [ $DAEMON_RUNNING -eq 1 ]; then pp_success_msg "${name} appears to be running already" else pp_warning_msg "${name} is already running but without a pid file" fi fi } . cat <<-. >>$out # stops the service ${svc}_stop() . cat <<-'.' >>$out { pp_msg "Stopping ${desc}" pp_check_daemon_running if [ $DAEMON_RUNNING -ne 0 ]; then pp_signal `cat $pidfile 2>/dev/null` if [ -n "$pidfile" ]; then loop_cnt=1 while [ -e ${pidfile} ]; do sleep 1 loop_cnt=`expr $loop_cnt + 1` if [ $loop_cnt -eq 10 ]; then break fi done fi rm -f $pidfile pp_success_msg else pp_failure_msg echo -n "$desc does not appear to be running." echo fi } . cat <<-. >>$out # prints information about the service status # returns: # 0=running # 1=Not running # 2=Running without pidfile # 3=Running with pid that doesn't match pidfile ${svc}_status() . cat <<-'.' >>$out { pp_msg "Checking ${desc}" pp_check_daemon_running if [ $DAEMON_RUNNING -eq 1 ]; then pp_success_msg "PID $PARENT_PID: running" return 0 else if [ $DAEMON_RUNNING -eq 0 ]; then pp_failure_msg "not running" return 1 elif [ $DAEMON_RUNNING -eq 2 ]; then pp_warning_msg "running without a pid file" return 2 else pp_warning_msg "running but pid file doesn't match running processe()" return 3 fi fi } run_rc_command "$1" . } pp_bsd_service_make_init_script () { local svc=${svc_init_filename:-$1} local script="${svc_init_filepath:-"${svc_init_prefix}/etc/rc.d"}/$svc" script=`echo $script | sed 's://*:/:g'` local out=$pp_destdir$script pp_add_file_if_missing $script run 755 || return 0 pp_bsd_service_make_init_info "$svc" "$out" pp_bsd_service_make_init_set_vars "$svc" "$out" pp_bsd_service_make_init_body "$svc" "$out" chmod 755 $out } pp_bsd_handle_services () { if test -n "$pp_services"; then for svc in $pp_services; do pp_load_service_vars $svc # Append some code to %post to install the svc TODO: Figure out why/what pp_bsd_service_make_init_script $svc # prepend some code to %preun to uninstall svc TODO: Figure out why/what done fi } pp_backend_bsd_function() { case "$1" in pp_mkgroup) cat<<'.';; /usr/sbin/pw group show "$1" 2>/dev/null && return 0 /usr/sbin/pw group add "$1" . pp_mkuser:depends) echo pp_mkgroup;; pp_mkuser) cat<<'.';; #Check if user exists /usr/sbin/pw user show "$1" 2>/dev/null && return 0 pp_mkgroup "${2:-$1}" || return 1 echo "Creating user $1" /usr/sbin/pw user add \ -n "$1" \ -d "${3:-/nonexistent}" \ -g "${2:-$1}" \ -s "${4:-/bin/false}" . pp_havelib) cat<<'.';; for pp_tmp_dir in `echo "/usr/local/lib:/usr/lib:/lib${3:+:$3}" | tr : ' '`; do test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0 done return 1 . *) false;; esac } pp_systemd_make_service_file() { local svc f if [ "${pp_systemd_disabled:-false}" = "true" ]; then return fi svc="$1" f="${pp_systemd_service_dir:-/opt/quest/libexec/vas}/$svc.service" pp_add_file_if_missing $f run 644 v || return 0 cat <<. >$pp_destdir$f [Unit] Description=${pp_systemd_service_description:-"systemd service file for $svc"} ${pp_systemd_service_man:+"Documentation=$pp_systemd_service_man"} ${pp_systemd_service_documentation:+"Documentation=$pp_systemd_service_documentation"} ${pp_systemd_service_requires:+"Requires=$pp_systemd_service_requires"} After=${pp_systemd_service_after:-"syslog.target network.target auditd.service"} ${pp_systemd_service_before:+"Before=$pp_systemd_service_before"} ${pp_systemd_service_wants:+"Wants=$pp_systemd_service_wants"} ${pp_systemd_service_conflicts:+"Conflicts=$pp_systemd_service_conflicts"} [Service] ExecStart=${pp_systemd_service_exec:-"/opt/quest/sbin/$svc"} ${pp_systemd_service_exec_args} KillMode=${pp_systemd_service_killmode:-process} Type=${pp_systemd_service_type:-forking} ${pp_systemd_service_pidfile:+"PIDFile=$pp_systemd_service_pidfile"} [Install] WantedBy=${pp_systemd_system_target:-"multi-user.target"} . } pp_systemd_service_init_common () { cat <<. _pp_systemd_init () { systemd_service_dir=${pp_systemd_service_dir:-/opt/quest/libexec/vas} systemd_target=${pp_systemd_system_target:-"multi-user.target"} systemd_target_wants="\${systemd_target}.wants" pkg_config_cmd=${pp_systemd_pkg_config_cmd:-"\$(command -v pkg-config)"} systemctl_cmd=${pp_systemd_systemctl_cmd:-"\$(command -v systemctl)"} # See if pkg-config is installed to get the default locations for this OS, if not installed then just use what we hard code. # So far works on Debian 8, OpenSuse12.3, Ubuntu 16.04, RHEL 7.3 # See systemd wiki for more OS interactions https://en.wikipedia.org/wiki/Systemd if [ -x "\$pkg_config_cmd" ]; then systemd_system_unit_dir="\$(pkg-config systemd --variable=systemdsystemunitdir)" systemd_system_conf_dir="\$(pkg-config systemd --variable=systemdsystemconfdir)" fi #if pkg-config does not exist or if the \$pkg_config_cmd command returns nothing if test -z "\$systemd_system_unit_dir"; then systemdsystemunitdirs="/lib/systemd/system /usr/lib/systemd/system" for dir in \$systemdsystemunitdirs; do if [ -d "\$dir/\$systemd_target_wants" ]; then systemd_system_unit_dir="\$dir" break fi done fi # In the case where \$systemd_system_conf_dir is empty hard code the path if test -z "\$systemd_system_conf_dir"; then systemd_system_conf_dir="/etc/systemd/system" fi # if the \$svc.pp file defines the systemd unit dir then use it. ${pp_systemd_system_unit_dir:+"# systemd_system_unit_dir defined by variable pp_systemd_system_unit_dir from the \$svc.pp file"} systemd_system_unit_dir="${pp_systemd_system_unit_dir:-"\$systemd_system_unit_dir"}" # if the \$svc.pp file defines the systemd conf dir then use it. ${pp_systemd_system_conf_dir:+"# systemd_system_conf_dir defined by variable pp_systemd_system_conf_dir from the \$svc.pp file"} systemd_system_conf_dir="${pp_systemd_system_conf_dir:-"\$systemd_system_conf_dir"}" } . } pp_systemd_service_install_common () { if [ "${pp_systemd_disabled:-false}" = "true" ]; then cat<<'.' # systemd support disabled _pp_systemd_init () { return } _pp_systemd_install () { return } _pp_systemd_enable () { return } . return fi pp_systemd_service_init_common cat<<'.' _pp_systemd_install () { local svc="$1" # If $systemctl_cmd is not set, then call _pp_systemd_init. If still not # set, we do not know where the systemctl command is so do nothing; # systemd must not be on this system. if test -z "$systemctl_cmd"; then _pp_systemd_init fi if test -x "$systemctl_cmd" && test -d "$systemd_system_conf_dir/$systemd_target_wants"; then # If our service file still exists (upgrade) remove the link/file and systemctl # will recreate it if/when we enable the $svc service. rm -f "$systemd_system_conf_dir/$systemd_target_wants/$svc.service" # Copy the $svc.service file to the correct systemd_system_unit_dir location if [ "x$systemd_service_dir" != "x$systemd_system_unit_dir" ]; then cp -f "$systemd_service_dir/$svc.service" "$systemd_system_unit_dir/$svc.service" chmod 644 "$systemd_system_unit_dir/$svc.service" fi fi } _pp_systemd_enable () { local svc="$1" local RUNNING # If $systemctl_cmd is not set, then call _pp_systemd_init. If still not # set, we do not know where the systemctl command is so do nothing; # systemd must not be on this system. if test -z "$systemctl_cmd"; then _pp_systemd_init fi if test -x "$systemctl_cmd" && test -f "$systemd_system_unit_dir/$svc.service"; then # stop the daemon using the old init script before enabling systemd for the service # we do this so we do not "orphan" the process. Because init started it and if we enable systemd # it will not know about this process and will not be able to stop it. if [ -x "/etc/init.d/$svc" ]; then /etc/init.d/$svc status > /dev/null 2>&1 RUNNING=$? if [ $RUNNING -eq 0 ]; then /etc/init.d/$svc stop > /dev/null 2>&1 fi else RUNNING=1 fi # Enable the $svc.service $systemctl_cmd daemon-reload >/dev/null 2>&1 $systemctl_cmd enable $svc.service >/dev/null 2>&1 # Now that the service has been enabled, start it again if it was running before. if [ $RUNNING -eq 0 ]; then /etc/init.d/$svc start > /dev/null 2>&1 fi fi } . } pp_systemd_service_remove_common () { if [ "${pp_systemd_disabled:-false}" = "true" ]; then cat<<'.' # systemd support disabled _pp_systemd_init () { return } _pp_systemd_disable () { return } _pp_systemd_remove () { return } . return fi pp_systemd_service_init_common cat<<'.' _pp_systemd_disable () { local svc="$1" # If $systemctl_cmd is not set, then call _pp_systemd_init. # If still not set, we do not know where the systemctl command # is so do nothing; systemd must not be on this system. if test -z "$systemctl_cmd"; then _pp_systemd_init fi systemd_service_file="$systemd_system_conf_dir/$systemd_target_wants/$svc.service" # Remove systemd symlink (enabled) unit service file if test -e $systemd_service_file; then # Disable the $svc service if test -x "$systemctl_cmd"; then $systemctl_cmd disable $svc.service > /dev/null 2>&1 else # For some reason systemctl is not install but our service file exists # Just delete the symlink then rm -f "$systemd_service_file" fi fi } _pp_systemd_remove () { local svc="$1" # If $systemctl_cmd is not set, then call _pp_systemd_init. # If still not set, we do not know where the systemctl command # is so do nothing; systemd must not be on this system. if test -z "$systemctl_cmd"; then _pp_systemd_init fi # Remove the systemd unit service file if [ "x$systemd_service_dir" != "x$systemd_system_unit_dir" ]; then rm -f "$systemd_system_unit_dir/$svc.service" fi if test -x "$systemctl_cmd"; then $systemctl_cmd daemon-reload $systemctl_cmd reset-failed $svc.service >/dev/null 2>&1 || true fi } . } quest_require_vas () { typeset v d if test $# -ne 1; then return fi set -- `echo "$1" | tr . ' '` 0 0 0 for d do echo $d | grep '^[0-9][0-9]*$' > /dev/null || pp_error "quest_require_vas: Bad version component $d" done test $# -lt 4 && pp_error "quest_require_vas: missing version number" case "$1.$2.$3.$4" in *.0.0.0) v=$1;; *.*.0.0) v=$1.$2;; *.*.*.0) v=$1.$2.$3;; *) v=$1.$2.$3.$4;; esac cat <<. if test -x /opt/quest/bin/vastool && /opt/quest/bin/vastool -v | awk 'NR == 1 {print \$4}' | awk -F. '{ if (\$1<$1 || \$1==$1 && ( \ \$2<$2 || \$2==$2 && ( \ \$3<$3 || \$2==$3 && ( \ \$4<$4 )))) exit(1); }' then exit 0 else echo "Requires VAS $v or later" exit 1 fi . } pp_main ${1+"$@"}