diff options
Diffstat (limited to 'docs/BOOT_LOADER_INTERFACE.md')
| -rw-r--r-- | docs/BOOT_LOADER_INTERFACE.md | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/docs/BOOT_LOADER_INTERFACE.md b/docs/BOOT_LOADER_INTERFACE.md new file mode 100644 index 0000000..15a575d --- /dev/null +++ b/docs/BOOT_LOADER_INTERFACE.md @@ -0,0 +1,152 @@ +--- +title: Boot Loader Interface +category: Booting +layout: default +--- + +# The Boot Loader Interface + +systemd can interface with the boot loader to receive performance data and +other information, and pass control information. This is only supported on EFI +systems. Data is transferred between the boot loader and systemd in EFI +variables. All EFI variables use the vendor UUID +`4a67b082-0a4c-41cf-b6c7-440b29bb8c4f`. + +* The EFI Variable `LoaderTimeInitUSec` contains the timestamp in microseconds + when the loader was initialized. This value is the time spent in the firmware + for initialization, it is formatted as numeric, NUL-terminated, decimal + string, in UTF-16. + +* The EFI Variable `LoaderTimeExecUSec` contains the timestamp in microseconds + when the loader finished its work and is about to execute the kernel. The + time spent in the loader is the difference between `LoaderTimeExecUSec` and + `LoaderTimeInitUSec`. This value is formatted the same way as + `LoaderTimeInitUSec`. + +* The EFI variable `LoaderDevicePartUUID` contains the partition GUID of the + ESP the boot loader was run from formatted as NUL-terminated UTF16 string, in + normal GUID syntax. + +* The EFI variable `LoaderConfigTimeout` contains the boot menu timeout + currently in use. It may be modified both by the boot loader and by the + host. The value should be formatted as numeric, NUL-terminated, decimal + string, in UTF-16. The time is specified in µs. + +* Similarly, the EFI variable `LoaderConfigTimeoutOneShot` contains a boot menu + timeout for a single following boot. It is set by the OS in order to request + display of the boot menu on the following boot. When set overrides + `LoaderConfigTimeout`. It is removed automatically after being read by the + boot loader, to ensure it only takes effect a single time. This value is + formatted the same way as `LoaderConfigTimeout`. If set to `0` the boot menu + timeout is turned off, and the menu is shown indefinitely. + +* The EFI variable `LoaderEntries` may contain a series of boot loader entry + identifiers, one after the other, each individually NUL terminated. This may + be used to let the OS know which boot menu entries were discovered by the + boot loader. A boot loader entry identifier should be a short, non-empty + alphanumeric string (possibly containing `-`, too). The list should be in the + order the entries are shown on screen during boot. See below regarding a + recommended vocabulary for boot loader entry identifiers. + +* The EFI variable `LoaderEntryDefault` contains the default boot loader entry + to use. It contains a NUL-terminated boot loader entry identifier. + +* Similarly, the EFI variable `LoaderEntryOneShot` contains the default boot + loader entry to use for a single following boot. It is set by the OS in order + to request booting into a specific menu entry on the following boot. When set + overrides `LoaderEntryDefault`. It is removed automatically after being read + by the boot loader, to ensure it only takes effect a single time. This value + is formatted the same way as `LoaderEntryDefault`. + +* The EFI variable `LoaderEntrySelected` contains the boot loader entry + identifier that was booted. It is set by the boot loader and read by + the OS in order to identify which entry has been used for the current boot. + +* The EFI variable `LoaderFeatures` contains a 64bit unsigned integer with a + number of flags bits that are set by the boot loader and passed to the OS and + indicate the features the boot loader supports. Specifically, the following + bits are defined: + + * `1 << 0` → The boot loader honours `LoaderConfigTimeout` when set. + * `1 << 1` → The boot loader honours `LoaderConfigTimeoutOneShot` when set. + * `1 << 2` → The boot loader honours `LoaderEntryDefault` when set. + * `1 << 3` → The boot loader honours `LoaderEntryOneShot` when set. + * `1 << 4` → The boot loader supports boot counting as described in [Automatic Boot Assessment](https://systemd.io/AUTOMATIC_BOOT_ASSESSMENT). + * `1 << 5` → The boot loader supports looking for boot menu entries in the Extended Boot Loader Partition. + * `1 << 6` → The boot loader supports passing a random seed to the OS. + +* The EFI variable `LoaderRandomSeed` contains a binary random seed if set. It + is set by the boot loader to pass an entropy seed read from the ESP partition + to the OS. The system manager then credits this seed to the kernel's entropy + pool. It is the responsibility of the boot loader to ensure the quality and + integrity of the random seed. + +* The EFI variable `LoaderSystemToken` contains binary random data, + persistently set by the OS installer. Boot loaders that support passing + random seeds to the OS should use this data and combine it with the random + seed file read from the ESP. By combining this random data with the random + seed read off the disk before generating a seed to pass to the OS and a new + seed to store in the ESP the boot loader can protect itself from situations + where "golden" OS images that include a random seed are replicated and used + on multiple systems. Since the EFI variable storage is usually independent + (i.e. in physical NVRAM) of the ESP file system storage, and only the latter + is part of "golden" OS images, this ensures that different systems still come + up with different random seeds. Note that the `LoaderSystemToken` is + generally only written once, by the OS installer, and is usually not touched + after that. + +If `LoaderTimeInitUSec` and `LoaderTimeExecUSec` are set, `systemd-analyze` +will include them in its boot-time analysis. If `LoaderDevicePartUUID` is set, +systemd will mount the ESP that was used for the boot to `/boot`, but only if +that directory is empty, and only if no other file systems are mounted +there. The `systemctl reboot --boot-loader-entry=…` and `systemctl reboot +--boot-loader-menu=…` commands rely on the `LoaderFeatures` , +`LoaderConfigTimeoutOneShot`, `LoaderEntries`, `LoaderEntryOneShot` +variables. `LoaderRandomSeed` is read by PID during early boot and credited to +the kernel's random pool. + +## Boot Loader Entry Identifiers + +While boot loader entries may be named relatively freely, it's highly +recommended to follow the following rules when picking identifiers for the +entries, so that programs (and users) can derive basic context and meaning from +the identifiers as passed in `LoaderEntries`, `LoaderEntryDefault`, +`LoaderEntryOneShot`, `LoaderEntrySelected`, and possibly show nicely localized +names for them in UIs. + +1. When boot loader entries are defined through [Boot Loader + Specification](https://systemd.io/BOOT_LOADER_SPECIFICATION) drop-in files + the identifier should be derived directly from the drop-in snippet name, but + with the `.conf` (or `.efi` in case of Type #2 entries) suffix removed. + +2. Entries automatically discovered by the boot loader (as opposed to being + configured in configuration files) should generally have an identifier + prefixed with `auto-`. + +3. Boot menu entries referring to Microsoft Windows installations should either + use the identifier `windows` or use the `windows-` prefix for the + identifier. If a menu entry is automatically discovered, it should be + prefixed with `auto-`, see above (Example: this means an automatically + discovered Windows installation might have the identifier `auto-windows` or + `auto-windows-10` or so.). + +4. Similar, boot menu entries referring to Apple MacOS X installations should + use the identifier `osx` or one that is prefixed with `osx-`. If such an + entry is automatically discovered by the boot loader use `auto-osx` as + identifier, or `auto-osx-` as prefix for the identifier, see above. + +5. If a boot menu entry encapsulates the EFI shell program, it should use the + identifier `efi-shell` (or when automatically discovered: `auto-efi-shell`, + see above). + +6. If a boot menu entry encapsulates a reboot into EFI firmware setup feature, + it should use the identifier `reboot-to-firmware-setup` (or + `auto-reboot-to-firmware-setup` in case it is automatically discovered). + +## Links + +[Boot Loader Specification](https://systemd.io/BOOT_LOADER_SPECIFICATION)<br> +[Discoverable Partitions Specification](https://systemd.io/DISCOVERABLE_PARTITIONS)<br> +[systemd-boot(7)](https://www.freedesktop.org/software/systemd/man/systemd-boot.html)<br> +[bootctl(1)](https://www.freedesktop.org/software/systemd/man/bootctl.html)<br> +[systemd-gpt-auto-generator(8)](https://www.freedesktop.org/software/systemd/man/systemd-gpt-auto-generator.html) |