summaryrefslogtreecommitdiffstats
path: root/src/shared/linux/ethtool.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--src/shared/linux/ethtool.h2021
1 files changed, 2021 insertions, 0 deletions
diff --git a/src/shared/linux/ethtool.h b/src/shared/linux/ethtool.h
new file mode 100644
index 0000000..b06c630
--- /dev/null
+++ b/src/shared/linux/ethtool.h
@@ -0,0 +1,2021 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ * christopher.leech@intel.com,
+ * scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#ifndef __KERNEL__
+#include <limits.h> /* for INT_MAX */
+#endif
+
+#ifndef __KERNEL_DIV_ROUND_UP
+#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+#endif
+
+/* All structures exposed to userland should be defined such that they
+ * have the same layout for 32-bit and 64-bit userland.
+ */
+
+/**
+ * struct ethtool_cmd - DEPRECATED, link control and status
+ * This structure is DEPRECATED, please use struct ethtool_link_settings.
+ * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET
+ * @supported: Bitmask of %SUPPORTED_* flags for the link modes,
+ * physical connectors and other link features for which the
+ * interface supports autonegotiation or auto-detection.
+ * Read-only.
+ * @advertising: Bitmask of %ADVERTISED_* flags for the link modes,
+ * physical connectors and other link features that are
+ * advertised through autonegotiation or enabled for
+ * auto-detection.
+ * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ * applicable. For clause 45 PHYs this is the PRTAD.
+ * @transceiver: Historically used to distinguish different possible
+ * PHY types, but not in a consistent way. Deprecated.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ * either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ * protocols supported by the interface; 0 if unknown.
+ * Read-only.
+ * @maxtxpkt: Historically used to report TX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @maxrxpkt: Historically used to report RX IRQ coalescing; now
+ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated.
+ * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ * %ETH_TP_MDI_*. If the status is unknown or not applicable, the
+ * value will be %ETH_TP_MDI_INVALID. Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
+ * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ * When written successfully, the link should be renegotiated if
+ * necessary.
+ * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes
+ * and other link features that the link partner advertised
+ * through autonegotiation; 0 if unknown or not applicable.
+ * Read-only.
+ *
+ * The link speed in Mbps is split between @speed and @speed_hi. Use
+ * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
+ * access it.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes. If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted. For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver. They should use
+ * %ETHTOOL_GSET to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SSET.
+ *
+ * Deprecated fields should be ignored by both users and drivers.
+ */
+struct ethtool_cmd {
+ __u32 cmd;
+ __u32 supported;
+ __u32 advertising;
+ __u16 speed;
+ __u8 duplex;
+ __u8 port;
+ __u8 phy_address;
+ __u8 transceiver;
+ __u8 autoneg;
+ __u8 mdio_support;
+ __u32 maxtxpkt;
+ __u32 maxrxpkt;
+ __u16 speed_hi;
+ __u8 eth_tp_mdix;
+ __u8 eth_tp_mdix_ctrl;
+ __u32 lp_advertising;
+ __u32 reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+ __u32 speed)
+{
+ ep->speed = (__u16)(speed & 0xFFFF);
+ ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+ return ((__u32) ep->speed_hi << 16) | (__u32) ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>. This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22 1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45 2
+
+#define ETHTOOL_FWVERS_LEN 32
+#define ETHTOOL_BUSINFO_LEN 32
+#define ETHTOOL_EROMVERS_LEN 32
+
+/**
+ * struct ethtool_drvinfo - general driver and device information
+ * @cmd: Command number = %ETHTOOL_GDRVINFO
+ * @driver: Driver short name. This should normally match the name
+ * in its bus driver structure (e.g. pci_driver::name). Must
+ * not be an empty string.
+ * @version: Driver version string; may be an empty string
+ * @fw_version: Firmware version string; may be an empty string
+ * @erom_version: Expansion ROM version string; may be an empty string
+ * @bus_info: Device bus address. This should match the dev_name()
+ * string for the underlying bus device, if there is one. May be
+ * an empty string.
+ * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
+ * %ETHTOOL_SPFLAGS commands; also the number of strings in the
+ * %ETH_SS_PRIV_FLAGS set
+ * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS
+ * command; also the number of strings in the %ETH_SS_STATS set
+ * @testinfo_len: Number of results returned by the %ETHTOOL_TEST
+ * command; also the number of strings in the %ETH_SS_TEST set
+ * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM
+ * and %ETHTOOL_SEEPROM commands, in bytes
+ * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS
+ * command, in bytes
+ *
+ * Users can use the %ETHTOOL_GSSET_INFO command to get the number of
+ * strings in any string set (from Linux 2.6.34).
+ *
+ * Drivers should set at most @driver, @version, @fw_version and
+ * @bus_info in their get_drvinfo() implementation. The ethtool
+ * core fills in the other fields using other driver operations.
+ */
+struct ethtool_drvinfo {
+ __u32 cmd;
+ char driver[32];
+ char version[32];
+ char fw_version[ETHTOOL_FWVERS_LEN];
+ char bus_info[ETHTOOL_BUSINFO_LEN];
+ char erom_version[ETHTOOL_EROMVERS_LEN];
+ char reserved2[12];
+ __u32 n_priv_flags;
+ __u32 n_stats;
+ __u32 testinfo_len;
+ __u32 eedump_len;
+ __u32 regdump_len;
+};
+
+#define SOPASS_MAX 6
+
+/**
+ * struct ethtool_wolinfo - Wake-On-Lan configuration
+ * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL
+ * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes.
+ * Read-only.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE
+ * is set in @wolopts.
+ */
+struct ethtool_wolinfo {
+ __u32 cmd;
+ __u32 supported;
+ __u32 wolopts;
+ __u8 sopass[SOPASS_MAX];
+};
+
+/* for passing single values */
+struct ethtool_value {
+ __u32 cmd;
+ __u32 data;
+};
+
+#define PFC_STORM_PREVENTION_AUTO 0xffff
+#define PFC_STORM_PREVENTION_DISABLE 0
+
+enum tunable_id {
+ ETHTOOL_ID_UNSPEC,
+ ETHTOOL_RX_COPYBREAK,
+ ETHTOOL_TX_COPYBREAK,
+ ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
+ /*
+ * Add your fresh new tunable attribute above and remember to update
+ * tunable_strings[] in net/core/ethtool.c
+ */
+ __ETHTOOL_TUNABLE_COUNT,
+};
+
+enum tunable_type_id {
+ ETHTOOL_TUNABLE_UNSPEC,
+ ETHTOOL_TUNABLE_U8,
+ ETHTOOL_TUNABLE_U16,
+ ETHTOOL_TUNABLE_U32,
+ ETHTOOL_TUNABLE_U64,
+ ETHTOOL_TUNABLE_STRING,
+ ETHTOOL_TUNABLE_S8,
+ ETHTOOL_TUNABLE_S16,
+ ETHTOOL_TUNABLE_S32,
+ ETHTOOL_TUNABLE_S64,
+};
+
+struct ethtool_tunable {
+ __u32 cmd;
+ __u32 id;
+ __u32 type_id;
+ __u32 len;
+ void *data[0];
+};
+
+#define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff
+#define DOWNSHIFT_DEV_DISABLE 0
+
+/* Time in msecs after which link is reported as down
+ * 0 = lowest time supported by the PHY
+ * 0xff = off, link down detection according to standard
+ */
+#define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0
+#define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff
+
+/* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where
+ * the PHY's RX & TX blocks are put into a low-power mode when there is no
+ * link detected (typically cable is un-plugged). For RX, only a minimal
+ * link-detection is available, and for TX the PHY wakes up to send link pulses
+ * to avoid any lock-ups in case the peer PHY may also be running in EDPD mode.
+ *
+ * Some PHYs may support configuration of the wake-up interval for TX pulses,
+ * and some PHYs may support only disabling TX pulses entirely. For the latter
+ * a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be
+ * configured from userspace (should the user want it).
+ *
+ * The interval units for TX wake-up are in milliseconds, since this should
+ * cover a reasonable range of intervals:
+ * - from 1 millisecond, which does not sound like much of a power-saver
+ * - to ~65 seconds which is quite a lot to wait for a link to come up when
+ * plugging a cable
+ */
+#define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS 0xffff
+#define ETHTOOL_PHY_EDPD_NO_TX 0xfffe
+#define ETHTOOL_PHY_EDPD_DISABLE 0
+
+enum phy_tunable_id {
+ ETHTOOL_PHY_ID_UNSPEC,
+ ETHTOOL_PHY_DOWNSHIFT,
+ ETHTOOL_PHY_FAST_LINK_DOWN,
+ ETHTOOL_PHY_EDPD,
+ /*
+ * Add your fresh new phy tunable attribute above and remember to update
+ * phy_tunable_strings[] in net/core/ethtool.c
+ */
+ __ETHTOOL_PHY_TUNABLE_COUNT,
+};
+
+/**
+ * struct ethtool_regs - hardware register dump
+ * @cmd: Command number = %ETHTOOL_GREGS
+ * @version: Dump format version. This is driver-specific and may
+ * distinguish different chips/revisions. Drivers must use new
+ * version numbers whenever the dump format changes in an
+ * incompatible way.
+ * @len: On entry, the real length of @data. On return, the number of
+ * bytes used.
+ * @data: Buffer for the register dump
+ *
+ * Users should use %ETHTOOL_GDRVINFO to find the maximum length of
+ * a register dump for the interface. They must allocate the buffer
+ * immediately following this structure.
+ */
+struct ethtool_regs {
+ __u32 cmd;
+ __u32 version;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_eeprom - EEPROM dump
+ * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or
+ * %ETHTOOL_SEEPROM
+ * @magic: A 'magic cookie' value to guard against accidental changes.
+ * The value passed in to %ETHTOOL_SEEPROM must match the value
+ * returned by %ETHTOOL_GEEPROM for the same device. This is
+ * unused when @cmd is %ETHTOOL_GMODULEEEPROM.
+ * @offset: Offset within the EEPROM to begin reading/writing, in bytes
+ * @len: On entry, number of bytes to read/write. On successful
+ * return, number of bytes actually read/written. In case of
+ * error, this may indicate at what point the error occurred.
+ * @data: Buffer to read/write from
+ *
+ * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find
+ * the length of an on-board or module EEPROM, respectively. They
+ * must allocate the buffer immediately following this structure.
+ */
+struct ethtool_eeprom {
+ __u32 cmd;
+ __u32 magic;
+ __u32 offset;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ * for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ * advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ * combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ * that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ * its tx lpi (after reaching 'idle' state). Effective only when eee
+ * was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+ __u32 cmd;
+ __u32 supported;
+ __u32 advertised;
+ __u32 lp_advertised;
+ __u32 eee_active;
+ __u32 eee_enabled;
+ __u32 tx_lpi_enabled;
+ __u32 tx_lpi_timer;
+ __u32 reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+ __u32 cmd;
+ __u32 type;
+ __u32 eeprom_len;
+ __u32 reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ * a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ * before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ * a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ * before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ * this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ * except that this value applies while an IRQ is being serviced
+ * by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ * statistics block updates. Some drivers do not have an
+ * in-memory statistic block, and in such cases this value is
+ * ignored. This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ * a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ * a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ * before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ * a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ * a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ * sampling, measured in seconds. Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies that interrupts
+ * should be coalesced until
+ * (usecs > 0 && time_since_first_completion >= usecs) ||
+ * (max_frames > 0 && completed_frames >= max_frames)
+ *
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated. To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition time_since_first_completion >= usecs
+ *
+ * This is deprecated. Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates. Some drivers only implement
+ * one of RX or TX adaptive coalescing. Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+ __u32 cmd;
+ __u32 rx_coalesce_usecs;
+ __u32 rx_max_coalesced_frames;
+ __u32 rx_coalesce_usecs_irq;
+ __u32 rx_max_coalesced_frames_irq;
+ __u32 tx_coalesce_usecs;
+ __u32 tx_max_coalesced_frames;
+ __u32 tx_coalesce_usecs_irq;
+ __u32 tx_max_coalesced_frames_irq;
+ __u32 stats_block_coalesce_usecs;
+ __u32 use_adaptive_rx_coalesce;
+ __u32 use_adaptive_tx_coalesce;
+ __u32 pkt_rate_low;
+ __u32 rx_coalesce_usecs_low;
+ __u32 rx_max_coalesced_frames_low;
+ __u32 tx_coalesce_usecs_low;
+ __u32 tx_max_coalesced_frames_low;
+ __u32 pkt_rate_high;
+ __u32 rx_coalesce_usecs_high;
+ __u32 rx_max_coalesced_frames_high;
+ __u32 tx_coalesce_usecs_high;
+ __u32 tx_max_coalesced_frames_high;
+ __u32 rate_sample_interval;
+};
+
+/**
+ * struct ethtool_ringparam - RX/TX ring parameters
+ * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM
+ * @rx_max_pending: Maximum supported number of pending entries per
+ * RX ring. Read-only.
+ * @rx_mini_max_pending: Maximum supported number of pending entries
+ * per RX mini ring. Read-only.
+ * @rx_jumbo_max_pending: Maximum supported number of pending entries
+ * per RX jumbo ring. Read-only.
+ * @tx_max_pending: Maximum supported number of pending entries per
+ * TX ring. Read-only.
+ * @rx_pending: Current maximum number of pending entries per RX ring
+ * @rx_mini_pending: Current maximum number of pending entries per RX
+ * mini ring
+ * @rx_jumbo_pending: Current maximum number of pending entries per RX
+ * jumbo ring
+ * @tx_pending: Current maximum supported number of pending entries
+ * per TX ring
+ *
+ * If the interface does not have separate RX mini and/or jumbo rings,
+ * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0.
+ *
+ * There may also be driver-dependent minimum values for the number
+ * of entries per ring.
+ */
+struct ethtool_ringparam {
+ __u32 cmd;
+ __u32 rx_max_pending;
+ __u32 rx_mini_max_pending;
+ __u32 rx_jumbo_max_pending;
+ __u32 tx_max_pending;
+ __u32 rx_pending;
+ __u32 rx_mini_pending;
+ __u32 rx_jumbo_pending;
+ __u32 tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ * support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+ __u32 cmd;
+ __u32 max_rx;
+ __u32 max_tx;
+ __u32 max_other;
+ __u32 max_combined;
+ __u32 rx_count;
+ __u32 tx_count;
+ __u32 other_count;
+ __u32 combined_count;
+};
+
+/**
+ * struct ethtool_pauseparam - Ethernet pause (flow control) parameters
+ * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM
+ * @autoneg: Flag to enable autonegotiation of pause frame use
+ * @rx_pause: Flag to enable reception of pause frames
+ * @tx_pause: Flag to enable transmission of pause frames
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ * If the link is autonegotiated, drivers should use
+ * mii_advertise_flowctrl() or similar code to set the advertised
+ * pause frame capabilities based on the @rx_pause and @tx_pause flags,
+ * even if @autoneg is zero. They should also allow the advertised
+ * pause frame capabilities to be controlled directly through the
+ * advertising field of &struct ethtool_cmd.
+ *
+ * If @autoneg is non-zero, the MAC is configured to send and/or
+ * receive pause frames according to the result of autonegotiation.
+ * Otherwise, it is configured directly based on the @rx_pause and
+ * @tx_pause flags.
+ */
+struct ethtool_pauseparam {
+ __u32 cmd;
+ __u32 autoneg;
+ __u32 rx_pause;
+ __u32 tx_pause;
+};
+
+/**
+ * enum ethtool_link_ext_state - link extended state
+ */
+enum ethtool_link_ext_state {
+ ETHTOOL_LINK_EXT_STATE_AUTONEG,
+ ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE,
+ ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH,
+ ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY,
+ ETHTOOL_LINK_EXT_STATE_NO_CABLE,
+ ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE,
+ ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE,
+ ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
+ ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
+ ETHTOOL_LINK_EXT_STATE_OVERHEAT,
+};
+
+/**
+ * enum ethtool_link_ext_substate_autoneg - more information in addition to
+ * ETHTOOL_LINK_EXT_STATE_AUTONEG.
+ */
+enum ethtool_link_ext_substate_autoneg {
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1,
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED,
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED,
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE,
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE,
+ ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD,
+};
+
+/**
+ * enum ethtool_link_ext_substate_link_training - more information in addition to
+ * ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE.
+ */
+enum ethtool_link_ext_substate_link_training {
+ ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1,
+ ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT,
+ ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY,
+ ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT,
+};
+
+/**
+ * enum ethtool_link_ext_substate_logical_mismatch - more information in addition
+ * to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH.
+ */
+enum ethtool_link_ext_substate_link_logical_mismatch {
+ ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1,
+ ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK,
+ ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS,
+ ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED,
+ ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED,
+};
+
+/**
+ * enum ethtool_link_ext_substate_bad_signal_integrity - more information in
+ * addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY.
+ */
+enum ethtool_link_ext_substate_bad_signal_integrity {
+ ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
+ ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
+};
+
+/**
+ * enum ethtool_link_ext_substate_cable_issue - more information in
+ * addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE.
+ */
+enum ethtool_link_ext_substate_cable_issue {
+ ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1,
+ ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
+};
+
+#define ETH_GSTRING_LEN 32
+
+/**
+ * enum ethtool_stringset - string set ID
+ * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST
+ * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS
+ * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with
+ * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS
+ * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE;
+ * now deprecated
+ * @ETH_SS_FEATURES: Device feature names
+ * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
+ * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
+ * @ETH_SS_PHY_TUNABLES: PHY tunable names
+ * @ETH_SS_LINK_MODES: link mode names
+ * @ETH_SS_MSG_CLASSES: debug message class names
+ * @ETH_SS_WOL_MODES: wake-on-lan modes
+ * @ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
+ * @ETH_SS_TS_TX_TYPES: timestamping Tx types
+ * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters
+ * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types
+ */
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+ ETH_SS_PRIV_FLAGS,
+ ETH_SS_NTUPLE_FILTERS,
+ ETH_SS_FEATURES,
+ ETH_SS_RSS_HASH_FUNCS,
+ ETH_SS_TUNABLES,
+ ETH_SS_PHY_STATS,
+ ETH_SS_PHY_TUNABLES,
+ ETH_SS_LINK_MODES,
+ ETH_SS_MSG_CLASSES,
+ ETH_SS_WOL_MODES,
+ ETH_SS_SOF_TIMESTAMPING,
+ ETH_SS_TS_TX_TYPES,
+ ETH_SS_TS_RX_FILTERS,
+ ETH_SS_UDP_TUNNEL_TYPES,
+
+ /* add new constants above here */
+ ETH_SS_COUNT
+};
+
+/**
+ * struct ethtool_gstrings - string set for data tagging
+ * @cmd: Command number = %ETHTOOL_GSTRINGS
+ * @string_set: String set ID; one of &enum ethtool_stringset
+ * @len: On return, the number of strings in the string set
+ * @data: Buffer for strings. Each string is null-padded to a size of
+ * %ETH_GSTRING_LEN.
+ *
+ * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in
+ * the string set. They must allocate a buffer of the appropriate
+ * size immediately following this structure.
+ */
+struct ethtool_gstrings {
+ __u32 cmd;
+ __u32 string_set;
+ __u32 len;
+ __u8 data[0];
+};
+
+/**
+ * struct ethtool_sset_info - string set information
+ * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @sset_mask: On entry, a bitmask of string sets to query, with bits
+ * numbered according to &enum ethtool_stringset. On return, a
+ * bitmask of those string sets queried that are supported.
+ * @data: Buffer for string set sizes. On return, this contains the
+ * size of each string set that was queried and supported, in
+ * order of ID.
+ *
+ * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on
+ * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the
+ * size of set 1 and @data[1] contains the size of set 2.
+ *
+ * Users must allocate a buffer of the appropriate size (4 * number of
+ * sets queried) immediately following this structure.
+ */
+struct ethtool_sset_info {
+ __u32 cmd;
+ __u32 reserved;
+ __u64 sset_mask;
+ __u32 data[0];
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ * only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ * test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0),
+ ETH_TEST_FL_FAILED = (1 << 1),
+ ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
+ ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
+};
+
+/**
+ * struct ethtool_test - device self-test invocation
+ * @cmd: Command number = %ETHTOOL_TEST
+ * @flags: A bitmask of flags from &enum ethtool_test_flags. Some
+ * flags may be set by the user on entry; others may be set by
+ * the driver on return.
+ * @len: On return, the number of test results
+ * @data: Array of test results
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of test results that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of results) immediately
+ * following this structure.
+ */
+struct ethtool_test {
+ __u32 cmd;
+ __u32 flags;
+ __u32 reserved;
+ __u32 len;
+ __u64 data[0];
+};
+
+/**
+ * struct ethtool_stats - device-specific statistics
+ * @cmd: Command number = %ETHTOOL_GSTATS
+ * @n_stats: On return, the number of statistics
+ * @data: Array of statistics
+ *
+ * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the
+ * number of statistics that will be returned. They must allocate a
+ * buffer of the appropriate size (8 * number of statistics)
+ * immediately following this structure.
+ */
+struct ethtool_stats {
+ __u32 cmd;
+ __u32 n_stats;
+ __u64 data[0];
+};
+
+/**
+ * struct ethtool_perm_addr - permanent hardware address
+ * @cmd: Command number = %ETHTOOL_GPERMADDR
+ * @size: On entry, the size of the buffer. On return, the size of the
+ * address. The command fails if the buffer is too small.
+ * @data: Buffer for the address
+ *
+ * Users must allocate the buffer immediately following this structure.
+ * A buffer size of %MAX_ADDR_LEN should be sufficient for any address
+ * type.
+ */
+struct ethtool_perm_addr {
+ __u32 cmd;
+ __u32 size;
+ __u8 data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present. When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
+ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
+ ETH_FLAG_RXHASH = (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 spi;
+ __u8 tos;
+};
+
+#define ETH_RX_NFC_IP4 1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 l4_4_bytes;
+ __u8 tos;
+ __u8 ip_ver;
+ __u8 proto;
+};
+
+/**
+ * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc.
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow.
+ */
+struct ethtool_tcpip6_spec {
+ __be32 ip6src[4];
+ __be32 ip6dst[4];
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tclass;
+};
+
+/**
+ * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @spi: Security parameters index
+ * @tclass: Traffic Class
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv6.
+ */
+struct ethtool_ah_espip6_spec {
+ __be32 ip6src[4];
+ __be32 ip6dst[4];
+ __be32 spi;
+ __u8 tclass;
+};
+
+/**
+ * struct ethtool_usrip6_spec - general flow specification for IPv6
+ * @ip6src: Source host
+ * @ip6dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tclass: Traffic Class
+ * @l4_proto: Transport protocol number (nexthdr after any Extension Headers)
+ */
+struct ethtool_usrip6_spec {
+ __be32 ip6src[4];
+ __be32 ip6dst[4];
+ __be32 l4_4_bytes;
+ __u8 tclass;
+ __u8 l4_proto;
+};
+
+union ethtool_flow_union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethtool_tcpip6_spec tcp_ip6_spec;
+ struct ethtool_tcpip6_spec udp_ip6_spec;
+ struct ethtool_tcpip6_spec sctp_ip6_spec;
+ struct ethtool_ah_espip6_spec ah_ip6_spec;
+ struct ethtool_ah_espip6_spec esp_ip6_spec;
+ struct ethtool_usrip6_spec usr_ip6_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[52];
+};
+
+/**
+ * struct ethtool_flow_ext - additional RX flow fields
+ * @h_dest: destination MAC address
+ * @vlan_etype: VLAN EtherType
+ * @vlan_tci: VLAN tag control information
+ * @data: user defined data
+ *
+ * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
+ * is set in &struct ethtool_rx_flow_spec @flow_type.
+ * @h_dest is valid if %FLOW_MAC_EXT is set.
+ */
+struct ethtool_flow_ext {
+ __u8 padding[2];
+ unsigned char h_dest[ETH_ALEN];
+ __be16 vlan_etype;
+ __be16 vlan_tci;
+ __be32 data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ * Note, all additional fields must be ignored unless @flow_type
+ * includes the %FLOW_EXT or %FLOW_MAC_EXT flag
+ * (see &struct ethtool_flow_ext description).
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ * if packets should be discarded, or %RX_CLS_FLOW_WAKE if the
+ * packets should be used for Wake-on-LAN with %WAKE_FILTER
+ * @location: Location of rule in the table. Locations must be
+ * numbered such that a flow matching multiple rules will be
+ * classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+ __u32 flow_type;
+ union ethtool_flow_union h_u;
+ struct ethtool_flow_ext h_ext;
+ union ethtool_flow_union m_u;
+ struct ethtool_flow_ext m_ext;
+ __u64 ring_cookie;
+ __u32 location;
+};
+
+/* How rings are laid out when accessing virtual functions or
+ * offloaded queues is device specific. To allow users to do flow
+ * steering and specify these queues the ring cookie is partitioned
+ * into a 32bit queue index with an 8 bit virtual function id.
+ * This also leaves the 3bytes for further specifiers. It is possible
+ * future devices may support more than 256 virtual functions if
+ * devices start supporting PCIe w/ARI. However at the moment I
+ * do not know of any devices that support this so I do not reserve
+ * space for this at this time. If a future patch consumes the next
+ * byte it should be aware of this possibility.
+ */
+#define ETHTOOL_RX_FLOW_SPEC_RING 0x00000000FFFFFFFFLL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF 0x000000FF00000000LL
+#define ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF 32
+static inline __u64 ethtool_get_flow_spec_ring(__u64 ring_cookie)
+{
+ return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie;
+}
+
+static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie)
+{
+ return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >>
+ ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF;
+}
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rss_context: RSS context to be affected
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
+ * structure fields must not be used, except that if @flow_type includes
+ * the %FLOW_RSS flag, then @rss_context determines which RSS context to
+ * act on.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return. If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values. If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return; if
+ * @fs.@flow_type includes the %FLOW_RSS flag, then @rss_context is
+ * filled with the RSS context ID associated with the rule.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry. On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules. Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
+ * @fs.@location is the actual rule location. If @fs.@flow_type
+ * includes the %FLOW_RSS flag, @rss_context is the RSS context ID to
+ * use for flow spreading traffic which matches this rule. The value
+ * from the rxfh indirection table will be added to @fs.@ring_cookie
+ * to choose which ring to deliver to.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows. The special
+ * values are %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority). Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+ __u32 cmd;
+ __u32 flow_type;
+ __u64 data;
+ struct ethtool_rx_flow_spec fs;
+ union {
+ __u32 rule_cnt;
+ __u32 rss_context;
+ };
+ __u32 rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ * indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values. This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+ __u32 cmd;
+ __u32 size;
+ __u32 ring_index[0];
+};
+
+/**
+ * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key.
+ * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH
+ * @rss_context: RSS context identifier. Context 0 is the default for normal
+ * traffic; other contexts can be referenced as the destination for RX flow
+ * classification rules. %ETH_RXFH_CONTEXT_ALLOC is used with command
+ * %ETHTOOL_SRSSH to allocate a new RSS context; on return this field will
+ * contain the ID of the newly allocated context.
+ * @indir_size: On entry, the array size of the user buffer for the
+ * indirection table, which may be zero, or (for %ETHTOOL_SRSSH),
+ * %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH,
+ * the array size of the hardware indirection table.
+ * @key_size: On entry, the array size of the user buffer for the hash key,
+ * which may be zero. On return from %ETHTOOL_GRSSH, the size of the
+ * hardware hash key.
+ * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
+ * Valid values are one of the %ETH_RSS_HASH_*.
+ * @rsvd: Reserved for future extensions.
+ * @rss_config: RX ring/queue index for each hash value i.e., indirection table
+ * of @indir_size __u32 elements, followed by hash key of @key_size
+ * bytes.
+ *
+ * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the
+ * size should be returned. For %ETHTOOL_SRSSH, an @indir_size of
+ * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested
+ * and a @indir_size of zero means the indir table should be reset to default
+ * values (if @rss_context == 0) or that the RSS context should be deleted.
+ * An hfunc of zero means that hash function setting is not requested.
+ */
+struct ethtool_rxfh {
+ __u32 cmd;
+ __u32 rss_context;
+ __u32 indir_size;
+ __u32 key_size;
+ __u8 hfunc;
+ __u8 rsvd8[3];
+ __u32 rsvd32;
+ __u32 rss_config[0];
+};
+#define ETH_RXFH_CONTEXT_ALLOC 0xffffffff
+#define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+ __u32 flow_type;
+ union {
+ struct ethtool_tcpip4_spec tcp_ip4_spec;
+ struct ethtool_tcpip4_spec udp_ip4_spec;
+ struct ethtool_tcpip4_spec sctp_ip4_spec;
+ struct ethtool_ah_espip4_spec ah_ip4_spec;
+ struct ethtool_ah_espip4_spec esp_ip4_spec;
+ struct ethtool_usrip4_spec usr_ip4_spec;
+ struct ethhdr ether_spec;
+ __u8 hdata[72];
+ } h_u, m_u;
+
+ __u16 vlan_tag;
+ __u16 vlan_tag_mask;
+ __u64 data;
+ __u64 data_mask;
+
+ __s32 action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+ __u32 cmd;
+ struct ethtool_rx_ntuple_flow_spec fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * %ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ * get and filled in by ethtool for set operation.
+ * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ * firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+struct ethtool_dump {
+ __u32 cmd;
+ __u32 version;
+ __u32 flag;
+ __u32 len;
+ __u8 data[0];
+};
+
+#define ETH_FW_DUMP_DISABLE 0
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+ __u32 available;
+ __u32 requested;
+ __u32 active;
+ __u32 never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: On entry, the number of elements in the features[] array;
+ * on return, the number of elements in features[] needed to hold
+ * all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+ __u32 valid;
+ __u32 requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively. For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ *
+ * Drivers should only report the filters they actually support without
+ * upscaling in the SIOCSHWTSTAMP ioctl. If the SIOCSHWSTAMP request for
+ * HWTSTAMP_FILTER_V1_SYNC is supported by HWTSTAMP_FILTER_V1_EVENT, then the
+ * driver should only report HWTSTAMP_FILTER_V1_EVENT in this op.
+ */
+struct ethtool_ts_info {
+ __u32 cmd;
+ __u32 so_timestamping;
+ __s32 phc_index;
+ __u32 tx_types;
+ __u32 tx_reserved[3];
+ __u32 rx_filters;
+ __u32 rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ * those bits were ignored.
+ * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ * resulting state of bits masked by .valid is not equal to .requested.
+ * Probably there are other device-specific constraints on some features
+ * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ * here as though ignored bits were cleared.
+ * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ * compatibility functions. Requested offload state cannot be properly
+ * managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+ ETHTOOL_F_UNSUPPORTED__BIT,
+ ETHTOOL_F_WISH__BIT,
+ ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
+
+#define MAX_NUM_QUEUE 4096
+
+/**
+ * struct ethtool_per_queue_op - apply sub command to the queues in mask.
+ * @cmd: ETHTOOL_PERQUEUE
+ * @sub_command: the sub command which apply to each queues
+ * @queue_mask: Bitmap of the queues which sub command apply to
+ * @data: A complete command structure following for each of the queues addressed
+ */
+struct ethtool_per_queue_op {
+ __u32 cmd;
+ __u32 sub_command;
+ __u32 queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)];
+ char data[];
+};
+
+/**
+ * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters
+ * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
+ * @active_fec: FEC mode which is active on porte
+ * @fec: Bitmask of supported/configured FEC modes
+ * @rsvd: Reserved for future extensions. i.e FEC bypass feature.
+ *
+ * Drivers should reject a non-zero setting of @autoneg when
+ * autoneogotiation is disabled (or not supported) for the link.
+ *
+ */
+struct ethtool_fecparam {
+ __u32 cmd;
+ /* bitmask of FEC modes */
+ __u32 active_fec;
+ __u32 fec;
+ __u32 reserved;
+};
+
+/**
+ * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
+ * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported
+ * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver
+ * @ETHTOOL_FEC_OFF: No FEC Mode
+ * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode
+ * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode
+ */
+enum ethtool_fec_config_bits {
+ ETHTOOL_FEC_NONE_BIT,
+ ETHTOOL_FEC_AUTO_BIT,
+ ETHTOOL_FEC_OFF_BIT,
+ ETHTOOL_FEC_RS_BIT,
+ ETHTOOL_FEC_BASER_BIT,
+ ETHTOOL_FEC_LLRS_BIT,
+};
+
+#define ETHTOOL_FEC_NONE (1 << ETHTOOL_FEC_NONE_BIT)
+#define ETHTOOL_FEC_AUTO (1 << ETHTOOL_FEC_AUTO_BIT)
+#define ETHTOOL_FEC_OFF (1 << ETHTOOL_FEC_OFF_BIT)
+#define ETHTOOL_FEC_RS (1 << ETHTOOL_FEC_RS_BIT)
+#define ETHTOOL_FEC_BASER (1 << ETHTOOL_FEC_BASER_BIT)
+#define ETHTOOL_FEC_LLRS (1 << ETHTOOL_FEC_LLRS_BIT)
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings.
+ * Please use ETHTOOL_GLINKSETTINGS
+ */
+#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings.
+ * Please use ETHTOOL_SLINKSETTINGS
+ */
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK 0x0000000a
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
+
+#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */
+#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */
+#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */
+#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */
+#define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */
+
+#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */
+
+#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */
+#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */
+#define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */
+#define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */
+#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */
+#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET ETHTOOL_GSET
+#define SPARC_ETH_SSET ETHTOOL_SSET
+
+/* Link mode bit indices */
+enum ethtool_link_mode_bit_indices {
+ ETHTOOL_LINK_MODE_10baseT_Half_BIT = 0,
+ ETHTOOL_LINK_MODE_10baseT_Full_BIT = 1,
+ ETHTOOL_LINK_MODE_100baseT_Half_BIT = 2,
+ ETHTOOL_LINK_MODE_100baseT_Full_BIT = 3,
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT = 4,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT = 5,
+ ETHTOOL_LINK_MODE_Autoneg_BIT = 6,
+ ETHTOOL_LINK_MODE_TP_BIT = 7,
+ ETHTOOL_LINK_MODE_AUI_BIT = 8,
+ ETHTOOL_LINK_MODE_MII_BIT = 9,
+ ETHTOOL_LINK_MODE_FIBRE_BIT = 10,
+ ETHTOOL_LINK_MODE_BNC_BIT = 11,
+ ETHTOOL_LINK_MODE_10000baseT_Full_BIT = 12,
+ ETHTOOL_LINK_MODE_Pause_BIT = 13,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT = 14,
+ ETHTOOL_LINK_MODE_2500baseX_Full_BIT = 15,
+ ETHTOOL_LINK_MODE_Backplane_BIT = 16,
+ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT = 17,
+ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT = 18,
+ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT = 19,
+ ETHTOOL_LINK_MODE_10000baseR_FEC_BIT = 20,
+ ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21,
+ ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT = 22,
+ ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT = 23,
+ ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT = 24,
+ ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT = 25,
+ ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT = 26,
+ ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT = 27,
+ ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28,
+ ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29,
+ ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30,
+ ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31,
+
+ /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
+ * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
+ * macro for bits > 31. The only way to use indices > 31 is to
+ * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API.
+ */
+
+ ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32,
+ ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33,
+ ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34,
+ ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35,
+ ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36,
+ ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37,
+ ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38,
+ ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39,
+ ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT = 40,
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT = 41,
+ ETHTOOL_LINK_MODE_10000baseCR_Full_BIT = 42,
+ ETHTOOL_LINK_MODE_10000baseSR_Full_BIT = 43,
+ ETHTOOL_LINK_MODE_10000baseLR_Full_BIT = 44,
+ ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT = 45,
+ ETHTOOL_LINK_MODE_10000baseER_Full_BIT = 46,
+ ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47,
+ ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48,
+
+ ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49,
+ ETHTOOL_LINK_MODE_FEC_RS_BIT = 50,
+ ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51,
+ ETHTOOL_LINK_MODE_50000baseKR_Full_BIT = 52,
+ ETHTOOL_LINK_MODE_50000baseSR_Full_BIT = 53,
+ ETHTOOL_LINK_MODE_50000baseCR_Full_BIT = 54,
+ ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT = 55,
+ ETHTOOL_LINK_MODE_50000baseDR_Full_BIT = 56,
+ ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT = 57,
+ ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT = 58,
+ ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT = 59,
+ ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT = 60,
+ ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT = 61,
+ ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT = 62,
+ ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT = 63,
+ ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64,
+ ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65,
+ ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66,
+ ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67,
+ ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68,
+ ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT = 69,
+ ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT = 70,
+ ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT = 71,
+ ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT = 72,
+ ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT = 73,
+ ETHTOOL_LINK_MODE_FEC_LLRS_BIT = 74,
+ ETHTOOL_LINK_MODE_100000baseKR_Full_BIT = 75,
+ ETHTOOL_LINK_MODE_100000baseSR_Full_BIT = 76,
+ ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT = 77,
+ ETHTOOL_LINK_MODE_100000baseCR_Full_BIT = 78,
+ ETHTOOL_LINK_MODE_100000baseDR_Full_BIT = 79,
+ ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT = 80,
+ ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT = 81,
+ ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT = 82,
+ ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT = 83,
+ ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT = 84,
+ ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT = 85,
+ ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT = 86,
+ ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87,
+ ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT = 88,
+ ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89,
+ /* must be last entry */
+ __ETHTOOL_LINK_MODE_MASK_NBITS
+};
+
+#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
+ (1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT))
+
+/* DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new SUPPORTED_* macro for bits > 31.
+ */
+#define SUPPORTED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define SUPPORTED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define SUPPORTED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define SUPPORTED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define SUPPORTED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define SUPPORTED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define SUPPORTED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define SUPPORTED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define SUPPORTED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define SUPPORTED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define SUPPORTED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define SUPPORTED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define SUPPORTED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define SUPPORTED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define SUPPORTED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define SUPPORTED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define SUPPORTED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define SUPPORTED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define SUPPORTED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define SUPPORTED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define SUPPORTED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define SUPPORTED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define SUPPORTED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define SUPPORTED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define SUPPORTED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define SUPPORTED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define SUPPORTED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define SUPPORTED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define SUPPORTED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define SUPPORTED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define SUPPORTED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new SUPPORTED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/*
+ * DEPRECATED macros. Please migrate to
+ * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT
+ * define any new ADERTISE_* macro for bits > 31.
+ */
+#define ADVERTISED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half)
+#define ADVERTISED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full)
+#define ADVERTISED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half)
+#define ADVERTISED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full)
+#define ADVERTISED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half)
+#define ADVERTISED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full)
+#define ADVERTISED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg)
+#define ADVERTISED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP)
+#define ADVERTISED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI)
+#define ADVERTISED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII)
+#define ADVERTISED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE)
+#define ADVERTISED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC)
+#define ADVERTISED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full)
+#define ADVERTISED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause)
+#define ADVERTISED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause)
+#define ADVERTISED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full)
+#define ADVERTISED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane)
+#define ADVERTISED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full)
+#define ADVERTISED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full)
+#define ADVERTISED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full)
+#define ADVERTISED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC)
+#define ADVERTISED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full)
+#define ADVERTISED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full)
+#define ADVERTISED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full)
+#define ADVERTISED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full)
+#define ADVERTISED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full)
+#define ADVERTISED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full)
+#define ADVERTISED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full)
+#define ADVERTISED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full)
+#define ADVERTISED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full)
+#define ADVERTISED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full)
+/* Please do not define any new ADVERTISED_* macro for bits > 31, see
+ * notice above.
+ */
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things. When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+ * Update drivers/net/phy/phy.c:phy_speed_to_str() and
+ * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values.
+ */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define SPEED_5000 5000
+#define SPEED_10000 10000
+#define SPEED_14000 14000
+#define SPEED_20000 20000
+#define SPEED_25000 25000
+#define SPEED_40000 40000
+#define SPEED_50000 50000
+#define SPEED_56000 56000
+#define SPEED_100000 100000
+#define SPEED_200000 200000
+#define SPEED_400000 400000
+
+#define SPEED_UNKNOWN -1
+
+static inline int ethtool_validate_speed(__u32 speed)
+{
+ return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN;
+}
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
+
+static inline int ethtool_validate_duplex(__u8 duplex)
+{
+ switch (duplex) {
+ case DUPLEX_HALF:
+ case DUPLEX_FULL:
+ case DUPLEX_UNKNOWN:
+ return 1;
+ }
+
+ return 0;
+}
+
+#define MASTER_SLAVE_CFG_UNSUPPORTED 0
+#define MASTER_SLAVE_CFG_UNKNOWN 1
+#define MASTER_SLAVE_CFG_MASTER_PREFERRED 2
+#define MASTER_SLAVE_CFG_SLAVE_PREFERRED 3
+#define MASTER_SLAVE_CFG_MASTER_FORCE 4
+#define MASTER_SLAVE_CFG_SLAVE_FORCE 5
+#define MASTER_SLAVE_STATE_UNSUPPORTED 0
+#define MASTER_SLAVE_STATE_UNKNOWN 1
+#define MASTER_SLAVE_STATE_MASTER 2
+#define MASTER_SLAVE_STATE_SLAVE 3
+#define MASTER_SLAVE_STATE_ERR 4
+
+/* Which connector port. */
+#define PORT_TP 0x00
+#define PORT_AUI 0x01
+#define PORT_MII 0x02
+#define PORT_FIBRE 0x03
+#define PORT_BNC 0x04
+#define PORT_DA 0x05
+#define PORT_NONE 0xef
+#define PORT_OTHER 0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */
+#define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */
+#define XCVR_DUMMY1 0x02
+#define XCVR_DUMMY2 0x03
+#define XCVR_DUMMY3 0x04
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
+#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
+#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+#define WAKE_FILTER (1 << 7)
+
+#define WOL_MODE_COUNT 8
+
+/* L2-L4 network traffic flow types */
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
+#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */
+#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */
+#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
+#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */
+#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */
+#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
+#define IP_USER_FLOW IPV4_USER_FLOW
+#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */
+#define IPV4_FLOW 0x10 /* hash only */
+#define IPV6_FLOW 0x11 /* hash only */
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define FLOW_EXT 0x80000000
+#define FLOW_MAC_EXT 0x40000000
+/* Flag to enable RSS spreading of traffic matching rule (nfc only) */
+#define FLOW_RSS 0x20000000
+
+/* L3-L4 network traffic flow hash options */
+#define RXH_L2DA (1 << 1)
+#define RXH_VLAN (1 << 2)
+#define RXH_L3_PROTO (1 << 3)
+#define RXH_IP_SRC (1 << 4)
+#define RXH_IP_DST (1 << 5)
+#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define RXH_DISCARD (1 << 31)
+
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
+#define RX_CLS_FLOW_WAKE 0xfffffffffffffffeULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
+#define RX_CLS_LOC_ANY 0xffffffff
+#define RX_CLS_LOC_FIRST 0xfffffffe
+#define RX_CLS_LOC_LAST 0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079 0x1
+#define ETH_MODULE_SFF_8079_LEN 256
+#define ETH_MODULE_SFF_8472 0x2
+#define ETH_MODULE_SFF_8472_LEN 512
+#define ETH_MODULE_SFF_8636 0x3
+#define ETH_MODULE_SFF_8636_LEN 256
+#define ETH_MODULE_SFF_8436 0x4
+#define ETH_MODULE_SFF_8436_LEN 256
+
+#define ETH_MODULE_SFF_8636_MAX_LEN 640
+#define ETH_MODULE_SFF_8436_MAX_LEN 640
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset. On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently. The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+ /* These flags represent components dedicated to the interface
+ * the command is addressed to. Shift any flag left by
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+ * same type.
+ */
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
+ * multiple components */
+ ETH_RESET_AP = 1 << 8, /* Application processor */
+
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
+ * this interface */
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
+ * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
+
+/**
+ * struct ethtool_link_settings - link control and status
+ *
+ * IMPORTANT, Backward compatibility notice: When implementing new
+ * user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and
+ * if it succeeds use %ETHTOOL_SLINKSETTINGS to change link
+ * settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS
+ * succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in
+ * that case. Conversely, if %ETHTOOL_GLINKSETTINGS fails, use
+ * %ETHTOOL_GSET to query and %ETHTOOL_SSET to change link
+ * settings; do not use %ETHTOOL_SLINKSETTINGS if
+ * %ETHTOOL_GLINKSETTINGS failed: stick to
+ * %ETHTOOL_GSET/%ETHTOOL_SSET in that case.
+ *
+ * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS
+ * @speed: Link speed (Mbps)
+ * @duplex: Duplex mode; one of %DUPLEX_*
+ * @port: Physical connector type; one of %PORT_*
+ * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not
+ * applicable. For clause 45 PHYs this is the PRTAD.
+ * @autoneg: Enable/disable autonegotiation and auto-detection;
+ * either %AUTONEG_DISABLE or %AUTONEG_ENABLE
+ * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO
+ * protocols supported by the interface; 0 if unknown.
+ * Read-only.
+ * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of
+ * %ETH_TP_MDI_*. If the status is unknown or not applicable, the
+ * value will be %ETH_TP_MDI_INVALID. Read-only.
+ * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of
+ * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads
+ * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected.
+ * When written successfully, the link should be renegotiated if
+ * necessary.
+ * @link_mode_masks_nwords: Number of 32-bit words for each of the
+ * supported, advertising, lp_advertising link mode bitmaps. For
+ * %ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user
+ * (>= 0); on return, if handshake in progress, negative if
+ * request size unsupported by kernel: absolute value indicates
+ * kernel expected size and all the other fields but cmd
+ * are 0; otherwise (handshake completed), strictly positive
+ * to indicate size used by kernel and cmd field stays
+ * %ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For
+ * %ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive
+ * value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise
+ * refused. For drivers: ignore this field (use kernel's
+ * __ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
+ * be overwritten by kernel.
+ * @supported: Bitmap with each bit meaning given by
+ * %ethtool_link_mode_bit_indices for the link modes, physical
+ * connectors and other link features for which the interface
+ * supports autonegotiation or auto-detection. Read-only.
+ * @advertising: Bitmap with each bit meaning given by
+ * %ethtool_link_mode_bit_indices for the link modes, physical
+ * connectors and other link features that are advertised through
+ * autonegotiation or enabled for auto-detection.
+ * @lp_advertising: Bitmap with each bit meaning given by
+ * %ethtool_link_mode_bit_indices for the link modes, and other
+ * link features that the link partner advertised through
+ * autonegotiation; 0 if unknown or not applicable. Read-only.
+ * @transceiver: Used to distinguish different possible PHY types,
+ * reported consistently by PHYLIB. Read-only.
+ *
+ * If autonegotiation is disabled, the speed and @duplex represent the
+ * fixed link mode and are writable if the driver supports multiple
+ * link modes. If it is enabled then they are read-only; if the link
+ * is up they represent the negotiated link mode; if the link is down,
+ * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
+ * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
+ *
+ * Some hardware interfaces may have multiple PHYs and/or physical
+ * connectors fitted or do not allow the driver to detect which are
+ * fitted. For these interfaces @port and/or @phy_address may be
+ * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE.
+ * Otherwise, attempts to write different values may be ignored or
+ * rejected.
+ *
+ * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt
+ * are not available in %ethtool_link_settings. These fields will be
+ * always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will
+ * fail if any of them is set to non-zero value.
+ *
+ * Users should assume that all fields not marked read-only are
+ * writable and subject to validation by the driver. They should use
+ * %ETHTOOL_GLINKSETTINGS to get the current values before making specific
+ * changes and then applying them with %ETHTOOL_SLINKSETTINGS.
+ *
+ * Drivers that implement %get_link_ksettings and/or
+ * %set_link_ksettings should ignore the @cmd
+ * and @link_mode_masks_nwords fields (any change to them overwritten
+ * by kernel), and rely only on kernel's internal
+ * %__ETHTOOL_LINK_MODE_MASK_NBITS and
+ * %ethtool_link_mode_mask_t. Drivers that implement
+ * %set_link_ksettings() should validate all fields other than @cmd
+ * and @link_mode_masks_nwords that are not described as read-only or
+ * deprecated, and must ignore all fields described as read-only.
+ */
+struct ethtool_link_settings {
+ __u32 cmd;
+ __u32 speed;
+ __u8 duplex;
+ __u8 port;
+ __u8 phy_address;
+ __u8 autoneg;
+ __u8 mdio_support;
+ __u8 eth_tp_mdix;
+ __u8 eth_tp_mdix_ctrl;
+ __s8 link_mode_masks_nwords;
+ __u8 transceiver;
+ __u8 master_slave_cfg;
+ __u8 master_slave_state;
+ __u8 reserved1[1];
+ __u32 reserved[7];
+ __u32 link_mode_masks[0];
+ /* layout of link_mode_masks fields:
+ * __u32 map_supported[link_mode_masks_nwords];
+ * __u32 map_advertising[link_mode_masks_nwords];
+ * __u32 map_lp_advertising[link_mode_masks_nwords];
+ */
+};
+#endif /* _UAPI_LINUX_ETHTOOL_H */