summaryrefslogtreecommitdiffstats
path: root/runtime/doc/fold.txt
diff options
context:
space:
mode:
Diffstat (limited to 'runtime/doc/fold.txt')
-rw-r--r--runtime/doc/fold.txt603
1 files changed, 603 insertions, 0 deletions
diff --git a/runtime/doc/fold.txt b/runtime/doc/fold.txt
new file mode 100644
index 0000000..7def757
--- /dev/null
+++ b/runtime/doc/fold.txt
@@ -0,0 +1,603 @@
+*fold.txt* For Vim version 8.2. Last change: 2019 Jun 02
+
+
+ VIM REFERENCE MANUAL by Bram Moolenaar
+
+
+Folding *Folding* *folding* *folds*
+
+You can find an introduction on folding in chapter 28 of the user manual.
+|usr_28.txt|
+
+1. Fold methods |fold-methods|
+2. Fold commands |fold-commands|
+3. Fold options |fold-options|
+4. Behavior of folds |fold-behavior|
+
+{not available when compiled without the |+folding| feature}
+
+==============================================================================
+1. Fold methods *fold-methods*
+
+The folding method can be set with the 'foldmethod' option.
+
+When setting 'foldmethod' to a value other than "manual", all folds are
+deleted and new ones created. Switching to the "manual" method doesn't remove
+the existing folds. This can be used to first define the folds automatically
+and then change them manually.
+
+There are six methods to select folds:
+ manual manually define folds
+ indent more indent means a higher fold level
+ expr specify an expression to define folds
+ syntax folds defined by syntax highlighting
+ diff folds for unchanged text
+ marker folds defined by markers in the text
+
+
+MANUAL *fold-manual*
+
+Use commands to manually define the fold regions. This can also be used by a
+script that parses text to find folds.
+
+The level of a fold is only defined by its nesting. To increase the fold
+level of a fold for a range of lines, define a fold inside it that has the
+same lines.
+
+The manual folds are lost when you abandon the file. To save the folds use
+the |:mkview| command. The view can be restored later with |:loadview|.
+
+
+INDENT *fold-indent*
+
+The folds are automatically defined by the indent of the lines.
+
+The foldlevel is computed from the indent of the line, divided by the
+'shiftwidth' (rounded down). A sequence of lines with the same or higher fold
+level form a fold, with the lines with a higher level forming a nested fold.
+
+The nesting of folds is limited with 'foldnestmax'.
+
+Some lines are ignored and get the fold level of the line above or below it,
+whichever is lower. These are empty or white lines and lines starting
+with a character in 'foldignore'. White space is skipped before checking for
+characters in 'foldignore'. For C use "#" to ignore preprocessor lines.
+
+When you want to ignore lines in another way, use the "expr" method. The
+|indent()| function can be used in 'foldexpr' to get the indent of a line.
+
+
+EXPR *fold-expr*
+
+The folds are automatically defined by their foldlevel, like with the "indent"
+method. The value of the 'foldexpr' option is evaluated to get the foldlevel
+of a line. Examples:
+This will create a fold for all consecutive lines that start with a tab: >
+ :set foldexpr=getline(v:lnum)[0]==\"\\t\"
+This will call a function to compute the fold level: >
+ :set foldexpr=MyFoldLevel(v:lnum)
+This will make a fold out of paragraphs separated by blank lines: >
+ :set foldexpr=getline(v:lnum)=~'^\\s*$'&&getline(v:lnum+1)=~'\\S'?'<1':1
+This does the same: >
+ :set foldexpr=getline(v:lnum-1)=~'^\\s*$'&&getline(v:lnum)=~'\\S'?'>1':1
+
+Note that backslashes must be used to escape characters that ":set" handles
+differently (space, backslash, double quote, etc., see |option-backslash|).
+
+These are the conditions with which the expression is evaluated:
+- The current buffer and window are set for the line.
+- The variable "v:lnum" is set to the line number.
+- The result is used for the fold level in this way:
+ value meaning ~
+ 0 the line is not in a fold
+ 1, 2, .. the line is in a fold with this level
+ -1 the fold level is undefined, use the fold level of a
+ line before or after this line, whichever is the
+ lowest.
+ "=" use fold level from the previous line
+ "a1", "a2", .. add one, two, .. to the fold level of the previous
+ line, use the result for the current line
+ "s1", "s2", .. subtract one, two, .. from the fold level of the
+ previous line, use the result for the next line
+ "<1", "<2", .. a fold with this level ends at this line
+ ">1", ">2", .. a fold with this level starts at this line
+
+It is not required to mark the start (end) of a fold with ">1" ("<1"), a fold
+will also start (end) when the fold level is higher (lower) than the fold
+level of the previous line.
+
+There must be no side effects from the expression. The text in the buffer,
+cursor position, the search patterns, options etc. must not be changed.
+You can change and restore them if you are careful.
+
+If there is some error in the expression, or the resulting value isn't
+recognized, there is no error message and the fold level will be zero.
+For debugging the 'debug' option can be set to "msg", the error messages will
+be visible then.
+
+Note: Since the expression has to be evaluated for every line, this fold
+method can be very slow!
+
+Try to avoid the "=", "a" and "s" return values, since Vim often has to search
+backwards for a line for which the fold level is defined. This can be slow.
+
+An example of using "a1" and "s1": For a multi-line C comment, a line
+containing "/*" would return "a1" to start a fold, and a line containing "*/"
+would return "s1" to end the fold after that line: >
+ if match(thisline, '/\*') >= 0
+ return 'a1'
+ elseif match(thisline, '\*/') >= 0
+ return 's1'
+ else
+ return '='
+ endif
+However, this won't work for single line comments, strings, etc.
+
+|foldlevel()| can be useful to compute a fold level relative to a previous
+fold level. But note that foldlevel() may return -1 if the level is not known
+yet. And it returns the level at the start of the line, while a fold might
+end in that line.
+
+It may happen that folds are not updated properly. You can use |zx| or |zX|
+to force updating folds.
+
+
+SYNTAX *fold-syntax*
+
+A fold is defined by syntax items that have the "fold" argument. |:syn-fold|
+
+The fold level is defined by nesting folds. The nesting of folds is limited
+with 'foldnestmax'.
+
+Be careful to specify proper syntax syncing. If this is not done right, folds
+may differ from the displayed highlighting. This is especially relevant when
+using patterns that match more than one line. In case of doubt, try using
+brute-force syncing: >
+ :syn sync fromstart
+
+
+DIFF *fold-diff*
+
+The folds are automatically defined for text that is not part of a change or
+close to a change.
+
+This method only works properly when the 'diff' option is set for the current
+window and changes are being displayed. Otherwise the whole buffer will be
+one big fold.
+
+The 'diffopt' option can be used to specify the context. That is, the number
+of lines between the fold and a change that are not included in the fold. For
+example, to use a context of 8 lines: >
+ :set diffopt=filler,context:8
+The default context is six lines.
+
+When 'scrollbind' is also set, Vim will attempt to keep the same folds open in
+other diff windows, so that the same text is visible.
+
+
+MARKER *fold-marker*
+
+Markers in the text tell where folds start and end. This allows you to
+precisely specify the folds. This will allow deleting and putting a fold,
+without the risk of including the wrong lines. The 'foldtext' option is
+normally set such that the text before the marker shows up in the folded line.
+This makes it possible to give a name to the fold.
+
+Markers can have a level included, or can use matching pairs. Including a
+level is easier, you don't have to add end markers and avoid problems with
+non-matching marker pairs. Example: >
+ /* global variables {{{1 */
+ int varA, varB;
+
+ /* functions {{{1 */
+ /* funcA() {{{2 */
+ void funcA() {}
+
+ /* funcB() {{{2 */
+ void funcB() {}
+
+A fold starts at a "{{{" marker. The following number specifies the fold
+level. What happens depends on the difference between the current fold level
+and the level given by the marker:
+1. If a marker with the same fold level is encountered, the previous fold
+ ends and another fold with the same level starts.
+2. If a marker with a higher fold level is found, a nested fold is started.
+3. If a marker with a lower fold level is found, all folds up to and including
+ this level end and a fold with the specified level starts.
+
+The number indicates the fold level. A zero cannot be used (a marker with
+level zero is ignored). You can use "}}}" with a digit to indicate the level
+of the fold that ends. The fold level of the following line will be one less
+than the indicated level. Note that Vim doesn't look back to the level of the
+matching marker (that would take too much time). Example: >
+
+ {{{1
+ fold level here is 1
+ {{{3
+ fold level here is 3
+ }}}3
+ fold level here is 2
+
+You can also use matching pairs of "{{{" and "}}}" markers to define folds.
+Each "{{{" increases the fold level by one, each "}}}" decreases the fold
+level by one. Be careful to keep the markers matching! Example: >
+
+ {{{
+ fold level here is 1
+ {{{
+ fold level here is 2
+ }}}
+ fold level here is 1
+
+You can mix using markers with a number and without a number. A useful way of
+doing this is to use numbered markers for large folds, and unnumbered markers
+locally in a function. For example use level one folds for the sections of
+your file like "structure definitions", "local variables" and "functions".
+Use level 2 markers for each definition and function, Use unnumbered markers
+inside functions. When you make changes in a function to split up folds, you
+don't have to renumber the markers.
+
+The markers can be set with the 'foldmarker' option. It is recommended to
+keep this at the default value of "{{{,}}}", so that files can be exchanged
+between Vim users. Only change it when it is required for the file (e.g., it
+contains markers from another folding editor, or the default markers cause
+trouble for the language of the file).
+
+ *fold-create-marker*
+"zf" can be used to create a fold defined by markers. Vim will insert the
+markers for you. Vim will append the start and end marker, as specified with
+'foldmarker'. The markers are appended to the end of the line.
+'commentstring' is used if it isn't empty.
+This does not work properly when:
+- The line already contains a marker with a level number. Vim then doesn't
+ know what to do.
+- Folds nearby use a level number in their marker which gets in the way.
+- The line is inside a comment, 'commentstring' isn't empty and nested
+ comments don't work. For example with C: adding /* {{{ */ inside a comment
+ will truncate the existing comment. Either put the marker before or after
+ the comment, or add the marker manually.
+Generally it's not a good idea to let Vim create markers when you already have
+markers with a level number.
+
+ *fold-delete-marker*
+"zd" can be used to delete a fold defined by markers. Vim will delete the
+markers for you. Vim will search for the start and end markers, as specified
+with 'foldmarker', at the start and end of the fold. When the text around the
+marker matches with 'commentstring', that text is deleted as well.
+This does not work properly when:
+- A line contains more than one marker and one of them specifies a level.
+ Only the first one is removed, without checking if this will have the
+ desired effect of deleting the fold.
+- The marker contains a level number and is used to start or end several folds
+ at the same time.
+
+==============================================================================
+2. Fold commands *fold-commands* *E490*
+
+All folding commands start with "z". Hint: the "z" looks like a folded piece
+of paper, if you look at it from the side.
+
+
+CREATING AND DELETING FOLDS ~
+ *zf* *E350*
+zf{motion} or
+{Visual}zf Operator to create a fold.
+ This only works when 'foldmethod' is "manual" or "marker".
+ The new fold will be closed for the "manual" method.
+ 'foldenable' will be set.
+ Also see |fold-create-marker|.
+
+ *zF*
+zF Create a fold for [count] lines. Works like "zf".
+
+:{range}fo[ld] *:fold* *:fo*
+ Create a fold for the lines in {range}. Works like "zf".
+
+ *zd* *E351*
+zd Delete one fold at the cursor. When the cursor is on a folded
+ line, that fold is deleted. Nested folds are moved one level
+ up. In Visual mode one level of all folds (partially) in the
+ selected area are deleted.
+ Careful: This easily deletes more folds than you expect and
+ there is no undo for manual folding.
+ This only works when 'foldmethod' is "manual" or "marker".
+ Also see |fold-delete-marker|.
+
+ *zD*
+zD Delete folds recursively at the cursor. In Visual mode all
+ folds (partially) in the selected area and all nested folds in
+ them are deleted.
+ This only works when 'foldmethod' is "manual" or "marker".
+ Also see |fold-delete-marker|.
+
+ *zE* *E352*
+zE Eliminate all folds in the window.
+ This only works when 'foldmethod' is "manual" or "marker".
+ Also see |fold-delete-marker|.
+
+
+OPENING AND CLOSING FOLDS ~
+
+A fold smaller than 'foldminlines' will always be displayed like it was open.
+Therefore the commands below may work differently on small folds.
+
+ *zo*
+zo Open one fold under the cursor. When a count is given, that
+ many folds deep will be opened. In Visual mode one level of
+ folds is opened for all lines in the selected area.
+
+ *zO*
+zO Open all folds under the cursor recursively. Folds that don't
+ contain the cursor line are unchanged.
+ In Visual mode it opens all folds that are in the selected
+ area, also those that are only partly selected.
+
+ *zc*
+zc Close one fold under the cursor. When a count is given, that
+ many folds deep are closed. In Visual mode one level of folds
+ is closed for all lines in the selected area.
+ 'foldenable' will be set.
+
+ *zC*
+zC Close all folds under the cursor recursively. Folds that
+ don't contain the cursor line are unchanged.
+ In Visual mode it closes all folds that are in the selected
+ area, also those that are only partly selected.
+ 'foldenable' will be set.
+
+ *za*
+za When on a closed fold: open it. When folds are nested, you
+ may have to use "za" several times. When a count is given,
+ that many closed folds are opened.
+ When on an open fold: close it and set 'foldenable'. This
+ will only close one level, since using "za" again will open
+ the fold. When a count is given that many folds will be
+ closed (that's not the same as repeating "za" that many
+ times).
+
+ *zA*
+zA When on a closed fold: open it recursively.
+ When on an open fold: close it recursively and set
+ 'foldenable'.
+
+ *zv*
+zv View cursor line: Open just enough folds to make the line in
+ which the cursor is located not folded.
+
+ *zx*
+zx Update folds: Undo manually opened and closed folds: re-apply
+ 'foldlevel', then do "zv": View cursor line.
+ Also forces recomputing folds. This is useful when using
+ 'foldexpr' and the buffer is changed in a way that results in
+ folds not to be updated properly.
+
+ *zX*
+zX Undo manually opened and closed folds: re-apply 'foldlevel'.
+ Also forces recomputing folds, like |zx|.
+
+ *zm*
+zm Fold more: Subtract |v:count1| from 'foldlevel'. If 'foldlevel' was
+ already zero nothing happens.
+ 'foldenable' will be set.
+
+ *zM*
+zM Close all folds: set 'foldlevel' to 0.
+ 'foldenable' will be set.
+
+ *zr*
+zr Reduce folding: Add |v:count1| to 'foldlevel'.
+
+ *zR*
+zR Open all folds. This sets 'foldlevel' to highest fold level.
+
+ *:foldo* *:foldopen*
+:{range}foldo[pen][!]
+ Open folds in {range}. When [!] is added all folds are
+ opened. Useful to see all the text in {range}. Without [!]
+ one level of folds is opened.
+
+ *:foldc* *:foldclose*
+:{range}foldc[lose][!]
+ Close folds in {range}. When [!] is added all folds are
+ closed. Useful to hide all the text in {range}. Without [!]
+ one level of folds is closed.
+
+ *zn*
+zn Fold none: reset 'foldenable'. All folds will be open.
+
+ *zN*
+zN Fold normal: set 'foldenable'. All folds will be as they
+ were before.
+
+ *zi*
+zi Invert 'foldenable'.
+
+
+MOVING OVER FOLDS ~
+ *[z*
+[z Move to the start of the current open fold. If already at the
+ start, move to the start of the fold that contains it. If
+ there is no containing fold, the command fails.
+ When a count is used, repeats the command [count] times.
+
+ *]z*
+]z Move to the end of the current open fold. If already at the
+ end, move to the end of the fold that contains it. If there
+ is no containing fold, the command fails.
+ When a count is used, repeats the command [count] times.
+
+ *zj*
+zj Move downwards to the start of the next fold. A closed fold
+ is counted as one fold.
+ When a count is used, repeats the command [count] times.
+ This command can be used after an |operator|.
+
+ *zk*
+zk Move upwards to the end of the previous fold. A closed fold
+ is counted as one fold.
+ When a count is used, repeats the command [count] times.
+ This command can be used after an |operator|.
+
+
+EXECUTING COMMANDS ON FOLDS ~
+
+:[range]foldd[oopen] {cmd} *:foldd* *:folddo* *:folddoopen*
+ Execute {cmd} on all lines that are not in a closed fold.
+ When [range] is given, only these lines are used.
+ Each time {cmd} is executed the cursor is positioned on the
+ line it is executed for.
+ This works like the ":global" command: First all lines that
+ are not in a closed fold are marked. Then the {cmd} is
+ executed for all marked lines. Thus when {cmd} changes the
+ folds, this has no influence on where it is executed (except
+ when lines are deleted, of course).
+ Example: >
+ :folddoopen s/end/loop_end/ge
+< Note the use of the "e" flag to avoid getting an error message
+ where "end" doesn't match.
+
+:[range]folddoc[losed] {cmd} *:folddoc* *:folddoclosed*
+ Execute {cmd} on all lines that are in a closed fold.
+ Otherwise like ":folddoopen".
+
+==============================================================================
+3. Fold options *fold-options*
+
+COLORS *fold-colors*
+
+The colors of a closed fold are set with the Folded group |hl-Folded|. The
+colors of the fold column are set with the FoldColumn group |hl-FoldColumn|.
+Example to set the colors: >
+
+ :highlight Folded guibg=grey guifg=blue
+ :highlight FoldColumn guibg=darkgrey guifg=white
+
+
+FOLDLEVEL *fold-foldlevel*
+
+'foldlevel' is a number option: The higher the more folded regions are open.
+When 'foldlevel' is 0, all folds are closed.
+When 'foldlevel' is positive, some folds are closed.
+When 'foldlevel' is very high, all folds are open.
+'foldlevel' is applied when it is changed. After that manually folds can be
+opened and closed.
+When increased, folds above the new level are opened. No manually opened
+folds will be closed.
+When decreased, folds above the new level are closed. No manually closed
+folds will be opened.
+
+
+FOLDTEXT *fold-foldtext*
+
+'foldtext' is a string option that specifies an expression. This expression
+is evaluated to obtain the text displayed for a closed fold. Example: >
+
+ :set foldtext=v:folddashes.substitute(getline(v:foldstart),'/\\*\\\|\\*/\\\|{{{\\d\\=','','g')
+
+This shows the first line of the fold, with "/*", "*/" and "{{{" removed.
+Note the use of backslashes to avoid some characters to be interpreted by the
+":set" command. It's simpler to define a function and call that: >
+
+ :set foldtext=MyFoldText()
+ :function MyFoldText()
+ : let line = getline(v:foldstart)
+ : let sub = substitute(line, '/\*\|\*/\|{{{\d\=', '', 'g')
+ : return v:folddashes . sub
+ :endfunction
+
+Evaluating 'foldtext' is done in the |sandbox|. The current window is set to
+the window that displays the line. Errors are ignored.
+
+The default value is |foldtext()|. This returns a reasonable text for most
+types of folding. If you don't like it, you can specify your own 'foldtext'
+expression. It can use these special Vim variables:
+ v:foldstart line number of first line in the fold
+ v:foldend line number of last line in the fold
+ v:folddashes a string that contains dashes to represent the
+ foldlevel.
+ v:foldlevel the foldlevel of the fold
+
+In the result a TAB is replaced with a space and unprintable characters are
+made into printable characters.
+
+The resulting line is truncated to fit in the window, it never wraps.
+When there is room after the text, it is filled with the character specified
+by 'fillchars'.
+
+Note that backslashes need to be used for characters that the ":set" command
+handles differently: Space, backslash and double-quote. |option-backslash|
+
+
+FOLDCOLUMN *fold-foldcolumn*
+
+'foldcolumn' is a number, which sets the width for a column on the side of the
+window to indicate folds. When it is zero, there is no foldcolumn. A normal
+value is 4 or 5. The minimal useful value is 2, although 1 still provides
+some information. The maximum is 12.
+
+An open fold is indicated with a column that has a '-' at the top and '|'
+characters below it. This column stops where the open fold stops. When folds
+nest, the nested fold is one character right of the fold it's contained in.
+
+A closed fold is indicated with a '+'.
+
+Where the fold column is too narrow to display all nested folds, digits are
+shown to indicate the nesting level.
+
+The mouse can also be used to open and close folds by clicking in the
+fold column:
+- Click on a '+' to open the closed fold at this row.
+- Click on any other non-blank character to close the open fold at this row.
+
+
+OTHER OPTIONS
+
+'foldenable' 'fen': Open all folds while not set.
+'foldexpr' 'fde': Expression used for "expr" folding.
+'foldignore' 'fdi': Characters used for "indent" folding.
+'foldmarker' 'fmr': Defined markers used for "marker" folding.
+'foldmethod' 'fdm': Name of the current folding method.
+'foldminlines' 'fml': Minimum number of screen lines for a fold to be
+ displayed closed.
+'foldnestmax' 'fdn': Maximum nesting for "indent" and "syntax" folding.
+'foldopen' 'fdo': Which kinds of commands open closed folds.
+'foldclose' 'fcl': When the folds not under the cursor are closed.
+
+==============================================================================
+4. Behavior of folds *fold-behavior*
+
+When moving the cursor upwards or downwards and when scrolling, the cursor
+will move to the first line of a sequence of folded lines. When the cursor is
+already on a folded line, it moves to the next unfolded line or the next
+closed fold.
+
+While the cursor is on folded lines, the cursor is always displayed in the
+first column. The ruler does show the actual cursor position, but since the
+line is folded, it cannot be displayed there.
+
+Many movement commands handle a sequence of folded lines like an empty line.
+For example, the "w" command stops once in the first column.
+
+When in Insert mode, the cursor line is never folded. That allows you to see
+what you type!
+
+When using an operator, a closed fold is included as a whole. Thus "dl"
+deletes the whole closed fold under the cursor.
+
+For Ex commands that work on buffer lines the range is adjusted to always
+start at the first line of a closed fold and end at the last line of a closed
+fold. Thus this command: >
+ :s/foo/bar/g
+when used with the cursor on a closed fold, will replace "foo" with "bar" in
+all lines of the fold.
+This does not happen for |:folddoopen| and |:folddoclosed|.
+
+When editing a buffer that has been edited before, the last used folding
+settings are used again. For manual folding the defined folds are restored.
+For all folding methods the manually opened and closed folds are restored.
+If this buffer has been edited in this window, the values from back then are
+used. Otherwise the values from the window where the buffer was edited last
+are used.
+
+==============================================================================
+ vim:tw=78:ts=8:noet:ft=help:norl: