diff options
Diffstat (limited to 'runtime/doc/message.txt')
| -rw-r--r-- | runtime/doc/message.txt | 873 |
1 files changed, 873 insertions, 0 deletions
diff --git a/runtime/doc/message.txt b/runtime/doc/message.txt new file mode 100644 index 0000000..fbf4ce2 --- /dev/null +++ b/runtime/doc/message.txt @@ -0,0 +1,873 @@ +*message.txt* For Vim version 8.2. Last change: 2020 Dec 29 + + + VIM REFERENCE MANUAL by Bram Moolenaar + + +This file contains an alphabetical list of messages and error messages that +Vim produces. You can use this if you don't understand what the message +means. It is not complete though. + +1. Old messages |:messages| +2. Error messages |error-messages| +3. Messages |messages| + +============================================================================== +1. Old messages *:messages* *:mes* *message-history* + +The ":messages" command can be used to view previously given messages. This +is especially useful when messages have been overwritten or truncated. This +depends on the 'shortmess' option. + + :mes[sages] Show all messages. + + :{count}mes[sages] Show the {count} most recent messages. + + :mes[sages] clear Clear all messages. + + :{count}mes[sages] clear + Clear messages, keeping only the {count} most + recent ones. + +The number of remembered messages is fixed at 20 for the tiny version and 200 +for other versions. + + *g<* +The "g<" command can be used to see the last page of previous command output. +This is especially useful if you accidentally typed <Space> at the hit-enter +prompt. You are then back at the hit-enter prompt and can then scroll further +back. +Note: If the output has been stopped with "q" at the more prompt, it will only +be displayed up to this point. +The previous command output is cleared when another command produces output. +The "g<" output is not redirected. + +If you are using translated messages, the first printed line tells who +maintains the messages or the translations. You can use this to contact the +maintainer when you spot a mistake. + +If you want to find help on a specific (error) message, use the ID at the +start of the message. For example, to get help on the message: > + + E72: Close error on swap file + +or (translated): > + + E72: Errore durante chiusura swap file + +Use: > + + :help E72 + +If you are lazy, it also works without the shift key: > + + :help e72 + +============================================================================== +2. Error messages *error-messages* *errors* + +When an error message is displayed, but it is removed before you could read +it, you can see it again with: > + :echo errmsg +Or view a list of recent messages with: > + :messages +See `:messages` above. + + +LIST OF MESSAGES + *E222* *E228* *E232* *E293* *E298* *E304* *E317* + *E318* *E356* *E438* *E439* *E440* *E316* *E320* *E322* + *E323* *E341* *E473* *E570* *E685* *E292* > + Add to read buffer + makemap: Illegal mode + Cannot create BalloonEval with both message and callback + Hangul automata ERROR + block was not locked + Didn't get block nr {N}? + ml_upd_block0(): Didn't get block 0?? + pointer block id wrong {N} + Updated too many blocks? + get_varp ERROR + u_undo: line numbers wrong + undo list corrupt + undo line missing + ml_get: cannot find line {N} + cannot find line {N} + line number out of range: {N} past the end + line count wrong in block {N} + Internal error + Internal error: {function} + fatal error in cs_manage_matches + Invalid count for del_bytes(): {N} + +This is an internal error. If you can reproduce it, please send in a bug +report. |bugs| + +> + ATTENTION + Found a swap file by the name ... + +See |ATTENTION|. + + *E92* > + Buffer {N} not found + +The buffer you requested does not exist. This can also happen when you have +wiped out a buffer which contains a mark or is referenced in another way. +|:bwipeout| + + *E95* > + Buffer with this name already exists + +You cannot have two buffers with the same name. + + *E72* > + Close error on swap file + +The |swap-file|, that is used to keep a copy of the edited text, could not be +closed properly. Mostly harmless. + + *E169* > + Command too recursive + +This happens when an Ex command executes an Ex command that executes an Ex +command, etc. The limit is 200 or the value of 'maxfuncdepth', whatever is +larger. When it's more there probably is an endless loop. Probably a +|:execute| or |:source| command is involved. + + *E254* > + Cannot allocate color {name} + +The color name {name} is unknown. See |gui-colors| for a list of colors that +are available on most systems. + + *E458* > + Cannot allocate colormap entry, some colors may be incorrect + +This means that there are not enough colors available for Vim. It will still +run, but some of the colors will not appear in the specified color. Try +stopping other applications that use many colors, or start them after starting +gvim. +Browsers are known to consume a lot of colors. You can avoid this with +netscape by telling it to use its own colormap: > + netscape -install +Or tell it to limit to a certain number of colors (64 should work well): > + netscape -ncols 64 +This can also be done with a line in your Xdefaults file: > + Netscape*installColormap: Yes +or > + Netscape*maxImageColors: 64 +< + *E79* > + Cannot expand wildcards + +A filename contains a strange combination of characters, which causes Vim to +attempt expanding wildcards but this fails. This does NOT mean that no +matching file names could be found, but that the pattern was illegal. + + *E459* > + Cannot go back to previous directory + +While expanding a file name, Vim failed to go back to the previously used +directory. All file names being used may be invalid now! You need to have +execute permission on the current directory. + + *E190* *E212* > + Cannot open "{filename}" for writing + Can't open file for writing + +For some reason the file you are writing to cannot be created or overwritten. +The reason could be that you do not have permission to write in the directory +or the file name is not valid. + + *E166* > + Can't open linked file for writing + +You are trying to write to a file which can't be overwritten, and the file is +a link (either a hard link or a symbolic link). Writing might still be +possible if the directory that contains the link or the file is writable, but +Vim now doesn't know if you want to delete the link and write the file in its +place, or if you want to delete the file itself and write the new file in its +place. If you really want to write the file under this name, you have to +manually delete the link or the file, or change the permissions so that Vim +can overwrite. + + *E46* > + Cannot change read-only variable "{name}" + +You are trying to assign a value to an argument of a function |a:var| or a Vim +internal variable |v:var| which is read-only. + + *E90* > + Cannot unload last buffer + +Vim always requires one buffer to be loaded, otherwise there would be nothing +to display in the window. + + *E40* > + Can't open errorfile <filename> + +When using the ":make" or ":grep" commands: The file used to save the error +messages or grep output cannot be opened. This can have several causes: +- 'shellredir' has a wrong value. +- The shell changes directory, causing the error file to be written in another + directory. This could be fixed by changing 'makeef', but then the make + command is still executed in the wrong directory. +- 'makeef' has a wrong value. +- The 'grepprg' or 'makeprg' could not be executed. This cannot always be + detected (especially on MS-Windows). Check your $PATH. + + > + Can't open file C:\TEMP\VIoD243.TMP + +On MS-Windows, this message appears when the output of an external command was +to be read, but the command didn't run successfully. This can be caused by +many things. Check the 'shell', 'shellquote', 'shellxquote', 'shellslash' and +related options. It might also be that the external command was not found, +there is no different error message for that. + + *E12* > + Command not allowed from exrc/vimrc in current dir or tag search + +Some commands are not allowed for security reasons. These commands mostly +come from a .exrc or .vimrc file in the current directory, or from a tags +file. Also see 'secure'. + + *E74* > + Command too complex + +A mapping resulted in a very long command string. Could be caused by a +mapping that indirectly calls itself. + +> + CONVERSION ERROR + +When writing a file and the text "CONVERSION ERROR" appears, this means that +some bits were lost when converting text from the internally used UTF-8 to the +format of the file. The file will not be marked unmodified. If you care +about the loss of information, set the 'fileencoding' option to another value +that can handle the characters in the buffer and write again. If you don't +care, you can abandon the buffer or reset the 'modified' option. +If there is a backup file, when 'writebackup' or 'backup' is set, it will not +be deleted, so you can move it back into place if you want to discard the +changes. + + *E302* > + Could not rename swap file + +When the file name changes, Vim tries to rename the |swap-file| as well. +This failed and the old swap file is now still used. Mostly harmless. + + *E43* *E44* > + Damaged match string + Corrupted regexp program + +Something inside Vim went wrong and resulted in a corrupted regexp. If you +know how to reproduce this problem, please report it. |bugs| + + *E208* *E209* *E210* > + Error writing to "{filename}" + Error closing "{filename}" + Error reading "{filename}" + +This occurs when Vim is trying to rename a file, but a simple change of file +name doesn't work. Then the file will be copied, but somehow this failed. +The result may be that both the original file and the destination file exist +and the destination file may be incomplete. + +> + Vim: Error reading input, exiting... + +This occurs when Vim cannot read typed characters while input is required. +Vim got stuck, the only thing it can do is exit. This can happen when both +stdin and stderr are redirected and executing a script that doesn't exit Vim. + + *E47* > + Error while reading errorfile + +Reading the error file was not possible. This is NOT caused by an error +message that was not recognized. + + *E80* > + Error while writing + +Writing a file was not completed successfully. The file is probably +incomplete. + + *E13* *E189* > + File exists (add ! to override) + "{filename}" exists (add ! to override) + +You are protected from accidentally overwriting a file. When you want to +write anyway, use the same command, but add a "!" just after the command. +Example: > + :w /tmp/test +changes to: > + :w! /tmp/test +< + *E768* > + Swap file exists: {filename} (:silent! overrides) + +You are protected from overwriting a file that is being edited by Vim. This +happens when you use ":w! filename" and a swapfile is found. +- If the swapfile was left over from an old crashed edit session you may want + to delete the swapfile. Edit {filename} to find out information about the + swapfile. +- If you want to write anyway prepend ":silent!" to the command. For example: > + :silent! w! /tmp/test +< The special command is needed, since you already added the ! for overwriting + an existing file. + + *E139* > + File is loaded in another buffer + +You are trying to write a file under a name which is also used in another +buffer. This would result in two versions of the same file. + + *E142* > + File not written: Writing is disabled by 'write' option + +The 'write' option is off. This makes all commands that try to write a file +generate this message. This could be caused by a |-m| commandline argument. +You can switch the 'write' option on with ":set write". + + *E25* > + GUI cannot be used: Not enabled at compile time + +You are running a version of Vim that doesn't include the GUI code. Therefore +"gvim" and ":gui" don't work. + + *E49* > + Invalid scroll size + +This is caused by setting an invalid value for the 'scroll', 'scrolljump' or +'scrolloff' options. + + *E17* > + "{filename}" is a directory + +You tried to write a file with the name of a directory. This is not possible. +You probably need to append a file name. + + *E19* > + Mark has invalid line number + +You are using a mark that has a line number that doesn't exist. This can +happen when you have a mark in another file, and some other program has +deleted lines from it. + + *E219* *E220* > + Missing {. + Missing }. + +Using a {} construct in a file name, but there is a { without a matching } or +the other way around. It should be used like this: {foo,bar}. This matches +"foo" and "bar". + + *E315* > + ml_get: invalid lnum: {number} + +This is an internal Vim error. Please try to find out how it can be +reproduced, and submit a bug report |bugreport.vim|. + + *E173* > + {number} more files to edit + +You are trying to exit, while the last item in the argument list has not been +edited. This protects you from accidentally exiting when you still have more +files to work on. See |argument-list|. If you do want to exit, just do it +again and it will work. + + *E23* *E194* > + No alternate file + No alternate file name to substitute for '#' + +The alternate file is not defined yet. See |alternate-file|. + + *E32* > + No file name + +The current buffer has no name. To write it, use ":w fname". Or give the +buffer a name with ":file fname". + + *E141* > + No file name for buffer {number} + +One of the buffers that was changed does not have a file name. Therefore it +cannot be written. You need to give the buffer a file name: > + :buffer {number} + :file {filename} +< + *E33* > + No previous substitute regular expression + +When using the '~' character in a pattern, it is replaced with the previously +used pattern in a ":substitute" command. This fails when no such command has +been used yet. See |/~|. This also happens when using ":s/pat/%/", where the +"%" stands for the previous substitute string. + + *E35* > + No previous regular expression + +When using an empty search pattern, the previous search pattern is used. But +that is not possible if there was no previous search. + + *E24* > + No such abbreviation + +You have used an ":unabbreviate" command with an argument which is not an +existing abbreviation. All variations of this command give the same message: +":cunabbrev", ":iunabbrev", etc. Check for trailing white space. + +> + /dev/dsp: No such file or directory + +Only given for GTK GUI with Gnome support. Gnome tries to use the audio +device and it isn't present. You can ignore this error. + + *E31* > + No such mapping + +You have used an ":unmap" command with an argument which is not an existing +mapping. All variations of this command give the same message: ":cunmap", +":unmap!", etc. A few hints: +- Check for trailing white space. +- If the mapping is buffer-local you need to use ":unmap <buffer>". + |:map-<buffer>| + + *E37* *E89* > + No write since last change (add ! to override) + No write since last change for buffer {N} (add ! to override) + +You are trying to |abandon| a file that has changes. Vim protects you from +losing your work. You can either write the changed file with ":w", or, if you +are sure, |abandon| it anyway, and lose all the changes. This can be done by +adding a '!' character just after the command you used. Example: > + :e other_file +changes to: > + :e! other_file +< + *E162* > + No write since last change for buffer "{name}" + +This appears when you try to exit Vim while some buffers are changed. You +will either have to write the changed buffer (with |:w|), or use a command to +abandon the buffer forcefully, e.g., with ":qa!". Careful, make sure you +don't throw away changes you really want to keep. You might have forgotten +about a buffer, especially when 'hidden' is set. + +> + [No write since last change] + +This appears when executing a shell command while at least one buffer was +changed. To avoid the message reset the 'warn' option. + + *E38* > + Null argument + +Something inside Vim went wrong and resulted in a NULL pointer. If you know +how to reproduce this problem, please report it. |bugs| + + *E41* *E82* *E83* *E342* > + Out of memory! + Out of memory! (allocating {number} bytes) + Cannot allocate any buffer, exiting... + Cannot allocate buffer, using other one... + +Oh, oh. You must have been doing something complicated, or some other program +is consuming your memory. Be careful! Vim is not completely prepared for an +out-of-memory situation. First make sure that any changes are saved. Then +try to solve the memory shortage. To stay on the safe side, exit Vim and +start again. + +If this happens while Vim is still initializing, editing files is very +unlikely to work, therefore Vim will exit with value 123. + +Buffers are only partly kept in memory, thus editing a very large file is +unlikely to cause an out-of-memory situation. Undo information is completely +in memory, you can reduce that with these options: +- 'undolevels' Set to a low value, or to -1 to disable undo completely. This + helps for a change that affects all lines. +- 'undoreload' Set to zero to disable. + + *E339* > + Pattern too long + +This happens on systems with 16 bit ints: The compiled regexp pattern is +longer than about 65000 characters. Try using a shorter pattern. +It also happens when the offset of a rule doesn't fit in the space available. +Try simplifying the pattern. + + *E45* > + 'readonly' option is set (add ! to override) + +You are trying to write a file that was marked as read-only. To write the +file anyway, either reset the 'readonly' option, or add a '!' character just +after the command you used. Example: > + :w +changes to: > + :w! +< + *E294* *E295* *E301* > + Read error in swap file + Seek error in swap file read + Oops, lost the swap file!!! + +Vim tried to read text from the |swap-file|, but something went wrong. The +text in the related buffer may now be corrupted! Check carefully before you +write a buffer. You may want to write it in another file and check for +differences. + + *E192* > + Recursive use of :normal too deep + +You are using a ":normal" command, whose argument again uses a ":normal" +command in a recursive way. This is restricted to 'maxmapdepth' levels. This +example illustrates how to get this message: > + :map gq :normal gq<CR> +If you type "gq", it will execute this mapping, which will call "gq" again. + + *E22* > + Scripts nested too deep + +Scripts can be read with the "-s" command-line argument and with the ":source" +command. The script can then again read another script. This can continue +for about 14 levels. When more nesting is done, Vim assumes that there is a +recursive loop somewhere and stops with this error message. + + *E319* > + Sorry, the command is not available in this version + +You have used a command that is not present in the version of Vim you are +using. When compiling Vim, many different features can be enabled or +disabled. This depends on how big Vim has chosen to be and the operating +system. See |+feature-list| for when which feature is available. The +|:version| command shows which feature Vim was compiled with. + + *E300* > + Swap file already exists (symlink attack?) + +This message appears when Vim is trying to open a swap file and finds it +already exists or finds a symbolic link in its place. This shouldn't happen, +because Vim already checked that the file doesn't exist. Either someone else +opened the same file at exactly the same moment (very unlikely) or someone is +attempting a symlink attack (could happen when editing a file in /tmp or when +'directory' starts with "/tmp", which is a bad choice). + + *E432* > + Tags file not sorted: {file name} + +Vim (and Vi) expect tags files to be sorted in ASCII order. Binary searching +can then be used, which is a lot faster than a linear search. If your tags +files are not properly sorted, reset the |'tagbsearch'| option. +This message is only given when Vim detects a problem when searching for a +tag. Sometimes this message is not given, even though the tags file is not +properly sorted. + + *E424* > + Too many different highlighting attributes in use + +Vim can only handle about 223 different kinds of highlighting. If you run +into this limit, you have used too many |:highlight| commands with different +arguments. A ":highlight link" is not counted. + + *E77* > + Too many file names + +When expanding file names, more than one match was found. Only one match is +allowed for the command that was used. + + *E303* > + Unable to open swap file for "{filename}", recovery impossible + +Vim was not able to create a swap file. You can still edit the file, but if +Vim unexpectedly exits the changes will be lost. And Vim may consume a lot of +memory when editing a big file. You may want to change the 'directory' option +to avoid this error. This error is not given when 'directory' is empty. See +|swap-file|. + + *E140* > + Use ! to write partial buffer + +When using a range to write part of a buffer, it is unusual to overwrite the +original file. It is probably a mistake (e.g., when Visual mode was active +when using ":w"), therefore Vim requires using a ! after the command, e.g.: +":3,10w!". +> + + Warning: Cannot convert string "<Key>Escape,_Key_Cancel" to type + VirtualBinding + +Messages like this appear when starting up. This is not a Vim problem, your +X11 configuration is wrong. You can find a hint on how to solve this here: +http://groups.yahoo.com/group/solarisonintel/message/12179. +[this URL is no longer valid] + + *W10* > + Warning: Changing a readonly file + +The file is read-only and you are making a change to it anyway. You can use +the |FileChangedRO| autocommand event to avoid this message (the autocommand +must reset the 'readonly' option). See 'modifiable' to completely disallow +making changes to a file. +This message is only given for the first change after 'readonly' has been set. + + *W13* > + Warning: File "{filename}" has been created after editing started + +You are editing a file in Vim when it didn't exist, but it does exist now. +You will have to decide if you want to keep the version in Vim or the newly +created file. This message is not given when 'buftype' is not empty. + + *W11* > + Warning: File "{filename}" has changed since editing started + +The file which you have started editing has got another timestamp and the +contents changed (more precisely: When reading the file again with the current +option settings and autocommands you would end up with different text). This +probably means that some other program changed the file. You will have to +find out what happened, and decide which version of the file you want to keep. +Set the 'autoread' option if you want to do this automatically. +This message is not given when 'buftype' is not empty. + +There is one situation where you get this message even though there is nothing +wrong: If you save a file in Windows on the day the daylight saving time +starts. It can be fixed in one of these ways: +- Add this line in your autoexec.bat: > + SET TZ=-1 +< Adjust the "-1" for your time zone. +- Disable "automatically adjust clock for daylight saving changes". +- Just write the file again the next day. Or set your clock to the next day, + write the file twice and set the clock back. + +If you get W11 all the time, you may need to disable "Acronis Active +Protection" or register Vim as a trusted service/application. + + *W12* > + Warning: File "{filename}" has changed and the buffer was changed in Vim as well + +Like the above, and the buffer for the file was changed in this Vim as well. +You will have to decide if you want to keep the version in this Vim or the one +on disk. This message is not given when 'buftype' is not empty. + + *W16* > + Warning: Mode of file "{filename}" has changed since editing started + +When the timestamp for a buffer was changed and the contents are still the +same but the mode (permissions) have changed. This usually occurs when +checking out a file from a version control system, which causes the read-only +bit to be reset. It should be safe to reload the file. Set 'autoread' to +automatically reload the file. + + *E211* > + File "{filename}" no longer available + +The file which you have started editing has disappeared, or is no longer +accessible. Make sure you write the buffer somewhere to avoid losing +changes. This message is not given when 'buftype' is not empty. + + *W14* > + Warning: List of file names overflow + +You must be using an awful lot of buffers. It's now possible that two buffers +have the same number, which causes various problems. You might want to exit +Vim and restart it. + + *E931* > + Buffer cannot be registered + +Out of memory or a duplicate buffer number. May happen after W14. Looking up +a buffer will not always work, better restart Vim. + + *E296* *E297* > + Seek error in swap file write + Write error in swap file + +This mostly happens when the disk is full. Vim could not write text into the +|swap-file|. It's not directly harmful, but when Vim unexpectedly exits some +text may be lost without recovery being possible. Vim might run out of memory +when this problem persists. + + *connection-refused* > + Xlib: connection to "<machine-name:0.0" refused by server + +This happens when Vim tries to connect to the X server, but the X server does +not allow a connection. The connection to the X server is needed to be able +to restore the title and for the xterm clipboard support. Unfortunately this +error message cannot be avoided, except by disabling the |+xterm_clipboard| +and |+X11| features. + + *E10* > + \\ should be followed by /, ? or & + +A command line started with a backslash or the range of a command contained a +backslash in a wrong place. This is often caused by command-line continuation +being disabled. Remove the 'C' flag from the 'cpoptions' option to enable it. +Or use ":set nocp". + + *E471* > + Argument required + +This happens when an Ex command with mandatory argument(s) was executed, but +no argument has been specified. + + *E474* *E475* *E983* > + Invalid argument + Invalid argument: {arg} + Duplicate argument: {arg} + +An Ex command or function has been executed, but an invalid argument has been +specified. + + *E488* > + Trailing characters + +An argument has been added to an Ex command that does not permit one. + + *E477* *E478* > + No ! allowed + Don't panic! + +You have added a "!" after an Ex command that doesn't permit one. + + *E481* > + No range allowed + +A range was specified for an Ex command that doesn't permit one. See +|cmdline-ranges|. + + *E482* *E483* > + Can't create file {filename} + Can't get temp file name + +Vim cannot create a temporary file. + + *E484* *E485* > + Can't open file {filename} + Can't read file {filename} + +Vim cannot read a temporary file. Especially on Windows, this can be caused +by wrong escaping of special characters for cmd.exe; the approach was +changed with patch 7.3.443. Try using |shellescape()| for all shell arguments +given to |system()|, or explicitly add escaping with ^. Also see +'shellxquote' and 'shellxescape'. + + *E464* > + Ambiguous use of user-defined command + +There are two user-defined commands with a common name prefix, and you used +Command-line completion to execute one of them. |user-cmd-ambiguous| +Example: > + :command MyCommand1 echo "one" + :command MyCommand2 echo "two" + :MyCommand +< + *E492* > + Not an editor command + +You tried to execute a command that is neither an Ex command nor +a user-defined command. + + *E943* > + Command table needs to be updated, run 'make cmdidxs' + +This can only happen when changing the source code, when adding a command in +src/ex_cmds.h. The lookup table then needs to be updated, by running: > + make cmdidxs + +============================================================================== +3. Messages *messages* + +This is an (incomplete) overview of various messages that Vim gives: + + *hit-enter* *press-enter* *hit-return* + *press-return* *hit-enter-prompt* + + Press ENTER or type command to continue + +This message is given when there is something on the screen for you to read, +and the screen is about to be redrawn: +- After executing an external command (e.g., ":!ls" and "="). +- Something is displayed on the status line that is longer than the width of + the window, or runs into the 'showcmd' or 'ruler' output. + +-> Press <Enter> or <Space> to redraw the screen and continue, without that + key being used otherwise. +-> Press ':' or any other Normal mode command character to start that command. + Note that after an external command some special keys, such as the cursor + keys, may not work normally, because the terminal is still set to a state + for executing the external command. +-> Press 'k', <Up>, 'u', 'b' or 'g' to scroll back in the messages. This + works the same way as at the |more-prompt|. Only works when 'compatible' + is off and 'more' is on. +-> Pressing 'j', 'f', 'd' or <Down> is ignored when messages scrolled off the + top of the screen, 'compatible' is off and 'more' is on, to avoid that + typing one 'j' or 'f' too many causes the messages to disappear. +-> Press <C-Y> to copy (yank) a modeless selection to the clipboard register. +-> Use a menu. The characters defined for Cmdline-mode are used. +-> When 'mouse' contains the 'r' flag, clicking the left mouse button works + like pressing <Space>. This makes it impossible to select text though. +-> For the GUI clicking the left mouse button in the last line works like + pressing <Space>. + +If you accidentally hit <Enter> or <Space> and you want to see the displayed +text then use |g<|. This only works when 'more' is set. + +To reduce the number of hit-enter prompts: +- Set 'cmdheight' to 2 or higher. +- Add flags to 'shortmess'. +- Reset 'showcmd' and/or 'ruler'. +- Make sure `:echo` text is shorter than or equal to |v:echospace| screen + cells. + +If your script causes the hit-enter prompt and you don't know why, you may +find the |v:scrollstart| variable useful. + +Also see 'mouse'. The hit-enter message is highlighted with the |hl-Question| +group. + + + *more-prompt* *pager* > + -- More -- + -- More -- SPACE/d/j: screen/page/line down, b/u/k: up, q: quit + +This message is given when the screen is filled with messages. It is only +given when the 'more' option is on. It is highlighted with the |hl-MoreMsg| +group. + +Type effect ~ + <CR> or <NL> or j or <Down> one more line + d down a page (half a screen) + <Space> or f or <PageDown> down a screen + G down all the way, until the hit-enter + prompt + + <BS> or k or <Up> one line back + u up a page (half a screen) + b or <PageUp> back a screen + g back to the start + + q, <Esc> or CTRL-C stop the listing + : stop the listing and enter a + command-line + <C-Y> yank (copy) a modeless selection to + the clipboard ("* and "+ registers) + {menu-entry} what the menu is defined to in + Cmdline-mode. + <LeftMouse> next page (*) + +Any other key causes the meaning of the keys to be displayed. + +(*) Clicking the left mouse button only works: + - For the GUI: in the last line of the screen. + - When 'r' is included in 'mouse' (but then selecting text won't work). + + +Note: The typed key is directly obtained from the terminal, it is not mapped +and typeahead is ignored. + +The |g<| command can be used to see the last page of previous command output. +This is especially useful if you accidentally typed <Space> at the hit-enter +prompt. + + vim:tw=78:ts=8:noet:ft=help:norl: |