diff options
Diffstat (limited to 'runtime/doc/spell.txt')
| -rw-r--r-- | runtime/doc/spell.txt | 1680 |
1 files changed, 1680 insertions, 0 deletions
diff --git a/runtime/doc/spell.txt b/runtime/doc/spell.txt new file mode 100644 index 0000000..1504ea9 --- /dev/null +++ b/runtime/doc/spell.txt @@ -0,0 +1,1680 @@ +*spell.txt* For Vim version 8.2. Last change: 2020 Aug 15 + + + VIM REFERENCE MANUAL by Bram Moolenaar + + +Spell checking *spell* + +1. Quick start |spell-quickstart| +2. Remarks on spell checking |spell-remarks| +3. Generating a spell file |spell-mkspell| +4. Spell file format |spell-file-format| + +{not available when the |+syntax| feature has been disabled at compile time} + +Note: There also is a vimspell plugin. If you have it you can do ":help +vimspell" to find about it. But you will probably want to get rid of the +plugin and use the 'spell' option instead, it works better. + +============================================================================== +1. Quick start *spell-quickstart* *E756* + +This command switches on spell checking: > + + :setlocal spell spelllang=en_us + +This switches on the 'spell' option and specifies to check for US English. + +The words that are not recognized are highlighted with one of these: + SpellBad word not recognized |hl-SpellBad| + SpellCap word not capitalised |hl-SpellCap| + SpellRare rare word |hl-SpellRare| + SpellLocal wrong spelling for selected region |hl-SpellLocal| + +Vim only checks words for spelling, there is no grammar check. + +If the 'mousemodel' option is set to "popup" and the cursor is on a badly +spelled word or it is "popup_setpos" and the mouse pointer is on a badly +spelled word, then the popup menu will contain a submenu to replace the bad +word. Note: this slows down the appearance of the popup menu. Note for GTK: +don't release the right mouse button until the menu appears, otherwise it +won't work. + +To search for the next misspelled word: + + *]s* +]s Move to next misspelled word after the cursor. + A count before the command can be used to repeat. + 'wrapscan' applies. + + *[s* +[s Like "]s" but search backwards, find the misspelled + word before the cursor. Doesn't recognize words + split over two lines, thus may stop at words that are + not highlighted as bad. Does not stop at word with + missing capital at the start of a line. + + *]S* +]S Like "]s" but only stop at bad words, not at rare + words or words for another region. + + *[S* +[S Like "]S" but search backwards. + + +To add words to your own word list: + + *zg* +zg Add word under the cursor as a good word to the first + name in 'spellfile'. A count may precede the command + to indicate the entry in 'spellfile' to be used. A + count of two uses the second entry. + + In Visual mode the selected characters are added as a + word (including white space!). + When the cursor is on text that is marked as badly + spelled then the marked text is used. + Otherwise the word under the cursor, separated by + non-word characters, is used. + + If the word is explicitly marked as bad word in + another spell file the result is unpredictable. + + *zG* +zG Like "zg" but add the word to the internal word list + |internal-wordlist|. + + *zw* +zw Like "zg" but mark the word as a wrong (bad) word. + If the word already appears in 'spellfile' it is + turned into a comment line. See |spellfile-cleanup| + for getting rid of those. + + *zW* +zW Like "zw" but add the word to the internal word list + |internal-wordlist|. + +zuw *zug* *zuw* +zug Undo |zw| and |zg|, remove the word from the entry in + 'spellfile'. Count used as with |zg|. + +zuW *zuG* *zuW* +zuG Undo |zW| and |zG|, remove the word from the internal + word list. Count used as with |zg|. + + *:spe* *:spellgood* +:[count]spe[llgood] {word} + Add {word} as a good word to 'spellfile', like with + |zg|. Without count the first name is used, with a + count of two the second entry, etc. + +:spe[llgood]! {word} Add {word} as a good word to the internal word list, + like with |zG|. + + *:spellw* *:spellwrong* +:[count]spellw[rong] {word} + Add {word} as a wrong (bad) word to 'spellfile', as + with |zw|. Without count the first name is used, with + a count of two the second entry, etc. + +:spellw[rong]! {word} Add {word} as a wrong (bad) word to the internal word + list, like with |zW|. + + *:spellra* *:spellrare* +:[count]spellr[are] {word} + Add {word} as a rare word to 'spellfile', similar to + |zw|. Without count the first name is used, with + a count of two the second entry, etc. + + There are no normal mode commands to mark words as + rare as this is a fairly uncommon command and all + intuitive commands for this are already taken. If you + want you can add mappings with e.g.: > + nnoremap z? :exe ':spellrare ' . expand('<cWORD>')<CR> + nnoremap z/ :exe ':spellrare! ' . expand('<cWORD>')<CR> +< |:spellundo|, |zuw|, or |zuW| can be used to undo this. + +:spellr[rare]! {word} Add {word} as a rare word to the internal word + list, similar to |zW|. + +:[count]spellu[ndo] {word} *:spellu* *:spellundo* + Like |zuw|. [count] used as with |:spellgood|. + +:spellu[ndo]! {word} Like |zuW|. [count] used as with |:spellgood|. + + +After adding a word to 'spellfile' with the above commands its associated +".spl" file will automatically be updated and reloaded. If you change +'spellfile' manually you need to use the |:mkspell| command. This sequence of +commands mostly works well: > + :edit <file in 'spellfile'> +< (make changes to the spell file) > + :mkspell! % + +More details about the 'spellfile' format below |spell-wordlist-format|. + + *internal-wordlist* +The internal word list is used for all buffers where 'spell' is set. It is +not stored, it is lost when you exit Vim. It is also cleared when 'encoding' +is set. + + +Finding suggestions for bad words: + *z=* +z= For the word under/after the cursor suggest correctly + spelled words. This also works to find alternatives + for a word that is not highlighted as a bad word, + e.g., when the word after it is bad. + In Visual mode the highlighted text is taken as the + word to be replaced. + The results are sorted on similarity to the word being + replaced. + This may take a long time. Hit CTRL-C when you get + bored. + + If the command is used without a count the + alternatives are listed and you can enter the number + of your choice or press <Enter> if you don't want to + replace. You can also use the mouse to click on your + choice (only works if the mouse can be used in Normal + mode and when there are no line wraps). Click on the + first line (the header) to cancel. + + The suggestions listed normally replace a highlighted + bad word. Sometimes they include other text, in that + case the replaced text is also listed after a "<". + + If a count is used that suggestion is used, without + prompting. For example, "1z=" always takes the first + suggestion. + + If 'verbose' is non-zero a score will be displayed + with the suggestions to indicate the likeliness to the + badly spelled word (the higher the score the more + different). + When a word was replaced the redo command "." will + repeat the word replacement. This works like "ciw", + the good word and <Esc>. This does NOT work for Thai + and other languages without spaces between words. + + *:spellr* *:spellrepall* *E752* *E753* +:spellr[epall] Repeat the replacement done by |z=| for all matches + with the replaced word in the current window. + +In Insert mode, when the cursor is after a badly spelled word, you can use +CTRL-X s to find suggestions. This works like Insert mode completion. Use +CTRL-N to use the next suggestion, CTRL-P to go back. |i_CTRL-X_s| + +The 'spellsuggest' option influences how the list of suggestions is generated +and sorted. See |'spellsuggest'|. + +The 'spellcapcheck' option is used to check the first word of a sentence +starts with a capital. This doesn't work for the first word in the file. +When there is a line break right after a sentence the highlighting of the next +line may be postponed. Use |CTRL-L| when needed. Also see |set-spc-auto| for +how it can be set automatically when 'spelllang' is set. + +The 'spelloptions' option has a few more flags that influence the way spell +checking works. + +Vim counts the number of times a good word is encountered. This is used to +sort the suggestions: words that have been seen before get a small bonus, +words that have been seen often get a bigger bonus. The COMMON item in the +affix file can be used to define common words, so that this mechanism also +works in a new or short file |spell-COMMON|. + +============================================================================== +2. Remarks on spell checking *spell-remarks* + +PERFORMANCE + +Vim does on-the-fly spell checking. To make this work fast the word list is +loaded in memory. Thus this uses a lot of memory (1 Mbyte or more). There +might also be a noticeable delay when the word list is loaded, which happens +when 'spell' is set and when 'spelllang' is set while 'spell' was already set. +To minimize the delay each word list is only loaded once, it is not deleted +when 'spelllang' is made empty or 'spell' is reset. When 'encoding' is set +all the word lists are reloaded, thus you may notice a delay then too. + + +REGIONS + +A word may be spelled differently in various regions. For example, English +comes in (at least) these variants: + + en all regions + en_au Australia + en_ca Canada + en_gb Great Britain + en_nz New Zealand + en_us USA + +Words that are not used in one region but are used in another region are +highlighted with SpellLocal |hl-SpellLocal|. + +Always use lowercase letters for the language and region names. + +When adding a word with |zg| or another command it's always added for all +regions. You can change that by manually editing the 'spellfile'. See +|spell-wordlist-format|. Note that the regions as specified in the files in +'spellfile' are only used when all entries in 'spelllang' specify the same +region (not counting files specified by their .spl name). + + *spell-german* +Specific exception: For German these special regions are used: + de all German words accepted + de_de old and new spelling + de_19 old spelling + de_20 new spelling + de_at Austria + de_ch Switzerland + + *spell-russian* +Specific exception: For Russian these special regions are used: + ru all Russian words accepted + ru_ru "IE" letter spelling + ru_yo "YO" letter spelling + + *spell-yiddish* +Yiddish requires using "utf-8" encoding, because of the special characters +used. If you are using latin1 Vim will use transliterated (romanized) Yiddish +instead. If you want to use transliterated Yiddish with utf-8 use "yi-tr". +In a table: + 'encoding' 'spelllang' + utf-8 yi Yiddish + latin1 yi transliterated Yiddish + utf-8 yi-tr transliterated Yiddish + + *spell-cjk* +Chinese, Japanese and other East Asian characters are normally marked as +errors, because spell checking of these characters is not supported. If +'spelllang' includes "cjk", these characters are not marked as errors. This +is useful when editing text with spell checking while some Asian words are +present. + + +SPELL FILES *spell-load* + +Vim searches for spell files in the "spell" subdirectory of the directories in +'runtimepath'. The name is: LL.EEE.spl, where: + LL the language name + EEE the value of 'encoding' + +The value for "LL" comes from 'spelllang', but excludes the region name. +Examples: + 'spelllang' LL ~ + en_us en + en-rare en-rare + medical_ca medical + +Only the first file is loaded, the one that is first in 'runtimepath'. If +this succeeds then additionally files with the name LL.EEE.add.spl are loaded. +All the ones that are found are used. + +If no spell file is found the |SpellFileMissing| autocommand event is +triggered. This may trigger the |spellfile.vim| plugin to offer you +downloading the spell file. + +Additionally, the files related to the names in 'spellfile' are loaded. These +are the files that |zg| and |zw| add good and wrong words to. + +Exceptions: +- Vim uses "latin1" when 'encoding' is "iso-8859-15". The euro sign doesn't + matter for spelling. +- When no spell file for 'encoding' is found "ascii" is tried. This only + works for languages where nearly all words are ASCII, such as English. It + helps when 'encoding' is not "latin1", such as iso-8859-2, and English text + is being edited. For the ".add" files the same name as the found main + spell file is used. + +For example, with these values: + 'runtimepath' is "~/.vim,/usr/share/vim82,~/.vim/after" + 'encoding' is "iso-8859-2" + 'spelllang' is "pl" + +Vim will look for: +1. ~/.vim/spell/pl.iso-8859-2.spl +2. /usr/share/vim82/spell/pl.iso-8859-2.spl +3. ~/.vim/spell/pl.iso-8859-2.add.spl +4. /usr/share/vim82/spell/pl.iso-8859-2.add.spl +5. ~/.vim/after/spell/pl.iso-8859-2.add.spl + +This assumes 1. is not found and 2. is found. + +If 'encoding' is "latin1" Vim will look for: +1. ~/.vim/spell/pl.latin1.spl +2. /usr/share/vim82/spell/pl.latin1.spl +3. ~/.vim/after/spell/pl.latin1.spl +4. ~/.vim/spell/pl.ascii.spl +5. /usr/share/vim82/spell/pl.ascii.spl +6. ~/.vim/after/spell/pl.ascii.spl + +This assumes none of them are found (Polish doesn't make sense when leaving +out the non-ASCII characters). + +Spelling for EBCDIC is currently not supported. + +A spell file might not be available in the current 'encoding'. See +|spell-mkspell| about how to create a spell file. Converting a spell file +with "iconv" will NOT work! + +Note: on VMS ".{enc}.spl" is changed to "_{enc}.spl" to avoid trouble with +filenames. + + *spell-sug-file* *E781* +If there is a file with exactly the same name as the ".spl" file but ending in +".sug", that file will be used for giving better suggestions. It isn't loaded +before suggestions are made to reduce memory use. + + *E758* *E759* *E778* *E779* *E780* *E782* +When loading a spell file Vim checks that it is properly formatted. If you +get an error the file may be truncated, modified or intended for another Vim +version. + + +SPELLFILE CLEANUP *spellfile-cleanup* + +The |zw| command turns existing entries in 'spellfile' into comment lines. +This avoids having to write a new file every time, but results in the file +only getting longer, never shorter. To clean up the comment lines in all +".add" spell files do this: > + :runtime spell/cleanadd.vim + +This deletes all comment lines, except the ones that start with "##". Use +"##" lines to add comments that you want to keep. + +You can invoke this script as often as you like. A variable is provided to +skip updating files that have been changed recently. Set it to the number of +seconds that has passed since a file was changed before it will be cleaned. +For example, to clean only files that were not changed in the last hour: > + let g:spell_clean_limit = 60 * 60 +The default is one second. + + +WORDS + +Vim uses a fixed method to recognize a word. This is independent of +'iskeyword', so that it also works in help files and for languages that +include characters like '-' in 'iskeyword'. The word characters do depend on +'encoding'. + +The table with word characters is stored in the main .spl file. Therefore it +matters what the current locale is when generating it! A .add.spl file does +not contain a word table though. + +For a word that starts with a digit the digit is ignored, unless the word as a +whole is recognized. Thus if "3D" is a word and "D" is not then "3D" is +recognized as a word, but if "3D" is not a word then only the "D" is marked as +bad. Hex numbers in the form 0x12ab and 0X12AB are recognized. + + +WORD COMBINATIONS + +It is possible to spell-check words that include a space. This is used to +recognize words that are invalid when used by themselves, e.g. for "et al.". +It can also be used to recognize "the the" and highlight it. + +The number of spaces is irrelevant. In most cases a line break may also +appear. However, this makes it difficult to find out where to start checking +for spelling mistakes. When you make a change to one line and only that line +is redrawn Vim won't look in the previous line, thus when "et" is at the end +of the previous line "al." will be flagged as an error. And when you type +"the<CR>the" the highlighting doesn't appear until the first line is redrawn. +Use |CTRL-L| to redraw right away. "[s" will also stop at a word combination +with a line break. + +When encountering a line break Vim skips characters such as '*', '>' and '"', +so that comments in C, shell and Vim code can be spell checked. + + +SYNTAX HIGHLIGHTING *spell-syntax* + +Files that use syntax highlighting can specify where spell checking should be +done: + +1. everywhere default +2. in specific items use "contains=@Spell" +3. everywhere but specific items use "contains=@NoSpell" + +For the second method adding the @NoSpell cluster will disable spell checking +again. This can be used, for example, to add @Spell to the comments of a +program, and add @NoSpell for items that shouldn't be checked. +Also see |:syn-spell| for text that is not in a syntax item. + + +VIM SCRIPTS + +If you want to write a Vim script that does something with spelling, you may +find these functions useful: + + spellbadword() find badly spelled word at the cursor + spellsuggest() get list of spelling suggestions + soundfold() get the sound-a-like version of a word + + +SETTING 'spellcapcheck' AUTOMATICALLY *set-spc-auto* + +After the 'spelllang' option has been set successfully, Vim will source the +files "spell/LANG.vim" in 'runtimepath'. "LANG" is the value of 'spelllang' +up to the first comma, dot or underscore. This can be used to set options +specifically for the language, especially 'spellcapcheck'. + +The distribution includes a few of these files. Use this command to see what +they do: > + :next $VIMRUNTIME/spell/*.vim + +Note that the default scripts don't set 'spellcapcheck' if it was changed from +the default value. This assumes the user prefers another value then. + + +DOUBLE SCORING *spell-double-scoring* + +The 'spellsuggest' option can be used to select "double" scoring. This +mechanism is based on the principle that there are two kinds of spelling +mistakes: + +1. You know how to spell the word, but mistype something. This results in a + small editing distance (character swapped/omitted/inserted) and possibly a + word that sounds completely different. + +2. You don't know how to spell the word and type something that sounds right. + The edit distance can be big but the word is similar after sound-folding. + +Since scores for these two mistakes will be very different we use a list +for each and mix them. + +The sound-folding is slow and people that know the language won't make the +second kind of mistakes. Therefore 'spellsuggest' can be set to select the +preferred method for scoring the suggestions. + +============================================================================== +3. Generating a spell file *spell-mkspell* + +Vim uses a binary file format for spelling. This greatly speeds up loading +the word list and keeps it small. + *.aff* *.dic* *Myspell* +You can create a Vim spell file from the .aff and .dic files that Myspell +uses. Myspell is used by OpenOffice.org and Mozilla. The OpenOffice .oxt +files are zip files which contain the .aff and .dic files. You should be able +to find them here: + http://extensions.services.openoffice.org/dictionary +The older, OpenOffice 2 files may be used if this doesn't work: + http://wiki.services.openoffice.org/wiki/Dictionaries +You can also use a plain word list. The results are the same, the choice +depends on what word lists you can find. + +If you install Aap (from www.a-a-p.org) you can use the recipes in the +runtime/spell/??/ directories. Aap will take care of downloading the files, +apply patches needed for Vim and build the .spl file. + +Make sure your current locale is set properly, otherwise Vim doesn't know what +characters are upper/lower case letters. If the locale isn't available (e.g., +when using an MS-Windows codepage on Unix) add tables to the .aff file +|spell-affix-chars|. If the .aff file doesn't define a table then the word +table of the currently active spelling is used. If spelling is not active +then Vim will try to guess. + + *:mksp* *:mkspell* +:mksp[ell][!] [-ascii] {outname} {inname} ... + Generate a Vim spell file from word lists. Example: > + :mkspell /tmp/nl nl_NL.words +< *E751* + When {outname} ends in ".spl" it is used as the output + file name. Otherwise it should be a language name, + such as "en", without the region name. The file + written will be "{outname}.{encoding}.spl", where + {encoding} is the value of the 'encoding' option. + + When the output file already exists [!] must be used + to overwrite it. + + When the [-ascii] argument is present, words with + non-ascii characters are skipped. The resulting file + ends in "ascii.spl". + + The input can be the Myspell format files {inname}.aff + and {inname}.dic. If {inname}.aff does not exist then + {inname} is used as the file name of a plain word + list. + + Multiple {inname} arguments can be given to combine + regions into one Vim spell file. Example: > + :mkspell ~/.vim/spell/en /tmp/en_US /tmp/en_CA /tmp/en_AU +< This combines the English word lists for US, CA and AU + into one en.spl file. + Up to eight regions can be combined. *E754* *E755* + The REP and SAL items of the first .aff file where + they appear are used. |spell-REP| |spell-SAL| + *E845* + This command uses a lot of memory, required to find + the optimal word tree (Polish, Italian and Hungarian + require several hundred Mbyte). The final result will + be much smaller, because compression is used. To + avoid running out of memory compression will be done + now and then. This can be tuned with the 'mkspellmem' + option. + + After the spell file was written and it was being used + in a buffer it will be reloaded automatically. + +:mksp[ell] [-ascii] {name}.{enc}.add + Like ":mkspell" above, using {name}.{enc}.add as the + input file and producing an output file in the same + directory that has ".spl" appended. + +:mksp[ell] [-ascii] {name} + Like ":mkspell" above, using {name} as the input file + and producing an output file in the same directory + that has ".{enc}.spl" appended. + +Vim will report the number of duplicate words. This might be a mistake in the +list of words. But sometimes it is used to have different prefixes and +suffixes for the same basic word to avoid them combining (e.g. Czech uses +this). If you want Vim to report all duplicate words set the 'verbose' +option. + +Since you might want to change a Myspell word list for use with Vim the +following procedure is recommended: + +1. Obtain the xx_YY.aff and xx_YY.dic files from Myspell. +2. Make a copy of these files to xx_YY.orig.aff and xx_YY.orig.dic. +3. Change the xx_YY.aff and xx_YY.dic files to remove bad words, add missing + words, define word characters with FOL/LOW/UPP, etc. The distributed + "*.diff" files can be used. +4. Start Vim with the right locale and use |:mkspell| to generate the Vim + spell file. +5. Try out the spell file with ":set spell spelllang=xx" if you wrote it in + a spell directory in 'runtimepath', or ":set spelllang=xx.enc.spl" if you + wrote it somewhere else. + +When the Myspell files are updated you can merge the differences: +1. Obtain the new Myspell files as xx_YY.new.aff and xx_UU.new.dic. +2. Use Vimdiff to see what changed: > + vimdiff xx_YY.orig.dic xx_YY.new.dic +3. Take over the changes you like in xx_YY.dic. + You may also need to change xx_YY.aff. +4. Rename xx_YY.new.dic to xx_YY.orig.dic and xx_YY.new.aff to xx_YY.orig.aff. + + +SPELL FILE VERSIONS *E770* *E771* *E772* + +Spell checking is a relatively new feature in Vim, thus it's possible that the +.spl file format will be changed to support more languages. Vim will check +the validity of the spell file and report anything wrong. + + E771: Old spell file, needs to be updated ~ +This spell file is older than your Vim. You need to update the .spl file. + + E772: Spell file is for newer version of Vim ~ +This means the spell file was made for a later version of Vim. You need to +update Vim. + + E770: Unsupported section in spell file ~ +This means the spell file was made for a later version of Vim and contains a +section that is required for the spell file to work. In this case it's +probably a good idea to upgrade your Vim. + + +SPELL FILE DUMP + +If for some reason you want to check what words are supported by the currently +used spelling files, use this command: + + *:spelldump* *:spelld* +:spelld[ump] Open a new window and fill it with all currently valid + words. Compound words are not included. + Note: For some languages the result may be enormous, + causing Vim to run out of memory. + +:spelld[ump]! Like ":spelldump" and include the word count. This is + the number of times the word was found while + updating the screen. Words that are in COMMON items + get a starting count of 10. + +The format of the word list is used |spell-wordlist-format|. You should be +able to read it with ":mkspell" to generate one .spl file that includes all +the words. + +When all entries to 'spelllang' use the same regions or no regions at all then +the region information is included in the dumped words. Otherwise only words +for the current region are included and no "/regions" line is generated. + +Comment lines with the name of the .spl file are used as a header above the +words that were generated from that .spl file. + + +SPELL FILE MISSING *spell-SpellFileMissing* *spellfile.vim* + +If the spell file for the language you are using is not available, you will +get an error message. But if the "spellfile.vim" plugin is active it will +offer you to download the spell file. Just follow the instructions, it will +ask you where to write the file (there must be a writable directory in +'runtimepath' for this). + +The plugin has a default place where to look for spell files, on the Vim ftp +server. The protocol used is SSL (https://) for security. If you want to use +another location or another protocol, set the g:spellfile_URL variable to the +directory that holds the spell files. You can use http:// or ftp://, but you +are taking a security risk then. The |netrw| plugin is used for getting the +file, look there for the specific syntax of the URL. Example: > + let g:spellfile_URL = 'https://ftp.nluug.nl/vim/runtime/spell' +You may need to escape special characters. + +The plugin will only ask about downloading a language once. If you want to +try again anyway restart Vim, or set g:spellfile_URL to another value (e.g., +prepend a space). + +To avoid using the "spellfile.vim" plugin do this in your vimrc file: > + + let loaded_spellfile_plugin = 1 + +Instead of using the plugin you can define a |SpellFileMissing| autocommand to +handle the missing file yourself. You can use it like this: > + + :au SpellFileMissing * call Download_spell_file(expand('<amatch>')) + +Thus the <amatch> item contains the name of the language. Another important +value is 'encoding', since every encoding has its own spell file. With two +exceptions: +- For ISO-8859-15 (latin9) the name "latin1" is used (the encodings only + differ in characters not used in dictionary words). +- The name "ascii" may also be used for some languages where the words use + only ASCII letters for most of the words. + +The default "spellfile.vim" plugin uses this autocommand, if you define your +autocommand afterwards you may want to use ":au! SpellFileMissing" to overrule +it. If you define your autocommand before the plugin is loaded it will notice +this and not do anything. + *E797* +Note that the SpellFileMissing autocommand must not change or destroy the +buffer the user was editing. + +============================================================================== +4. Spell file format *spell-file-format* + +This is the format of the files that are used by the person who creates and +maintains a word list. + +Note that we avoid the word "dictionary" here. That is because the goal of +spell checking differs from writing a dictionary (as in the book). For +spelling we need a list of words that are OK, thus should not be highlighted. +Person and company names will not appear in a dictionary, but do appear in a +word list. And some old words are rarely used while they are common +misspellings. These do appear in a dictionary but not in a word list. + +There are two formats: A straight list of words and a list using affix +compression. The files with affix compression are used by Myspell (Mozilla +and OpenOffice.org). This requires two files, one with .aff and one with .dic +extension. + + +FORMAT OF STRAIGHT WORD LIST *spell-wordlist-format* + +The words must appear one per line. That is all that is required. + +Additionally the following items are recognized: + +- Empty and blank lines are ignored. + + # comment ~ +- Lines starting with a # are ignored (comment lines). + + /encoding=utf-8 ~ +- A line starting with "/encoding=", before any word, specifies the encoding + of the file. After the second '=' comes an encoding name. This tells Vim + to setup conversion from the specified encoding to 'encoding'. Thus you can + use one word list for several target encodings. + + /regions=usca ~ +- A line starting with "/regions=" specifies the region names that are + supported. Each region name must be two ASCII letters. The first one is + region 1. Thus "/regions=usca" has region 1 "us" and region 2 "ca". + In an addition word list the region names should be equal to the main word + list! + +- Other lines starting with '/' are reserved for future use. The ones that + are not recognized are ignored. You do get a warning message, so that you + know something won't work. + +- A "/" may follow the word with the following items: + = Case must match exactly. + ? Rare word. + ! Bad (wrong) word. + 1 to 9 A region in which the word is valid. If no regions are + specified the word is valid in all regions. + +Example: + + # This is an example word list comment + /encoding=latin1 encoding of the file + /regions=uscagb regions "us", "ca" and "gb" + example word for all regions + blah/12 word for regions "us" and "ca" + vim/! bad word + Campbell/?3 rare word in region 3 "gb" + 's mornings/= keep-case word + +Note that when "/=" is used the same word with all upper-case letters is not +accepted. This is different from a word with mixed case that is automatically +marked as keep-case, those words may appear in all upper-case letters. + + +FORMAT WITH .AFF AND .DIC FILES *aff-dic-format* + +There are two files: the basic word list and an affix file. The affix file +specifies settings for the language and can contain affixes. The affixes are +used to modify the basic words to get the full word list. This significantly +reduces the number of words, especially for a language like Polish. This is +called affix compression. + +The basic word list and the affix file are combined with the ":mkspell" +command and results in a binary spell file. All the preprocessing has been +done, thus this file loads fast. The binary spell file format is described in +the source code (src/spell.c). But only developers need to know about it. + +The preprocessing also allows us to take the Myspell language files and modify +them before the Vim word list is made. The tools for this can be found in the +"src/spell" directory. + +The format for the affix and word list files is based on what Myspell uses +(the spell checker of Mozilla and OpenOffice.org). A description can be found +here: + http://lingucomponent.openoffice.org/affix.readme ~ +Note that affixes are case sensitive, this isn't obvious from the description. + +Vim supports quite a few extras. They are described below |spell-affix-vim|. +Attempts have been made to keep this compatible with other spell checkers, so +that the same files can often be used. One other project that offers more +than Myspell is Hunspell ( http://hunspell.sf.net ). + + +WORD LIST FORMAT *spell-dic-format* + +A short example, with line numbers: + + 1 1234 ~ + 2 aan ~ + 3 Als ~ + 4 Etten-Leur ~ + 5 et al. ~ + 6 's-Gravenhage ~ + 7 's-Gravenhaags ~ + 8 # word that differs between regions ~ + 9 kado/1 ~ + 10 cadeau/2 ~ + 11 TCP,IP ~ + 12 /the S affix may add a 's' ~ + 13 bedel/S ~ + +The first line contains the number of words. Vim ignores it, but you do get +an error message if it's not there. *E760* + +What follows is one word per line. White space at the end of the line is +ignored, all other white space matters. The encoding is specified in the +affix file |spell-SET|. + +Comment lines start with '#' or '/'. See the example lines 8 and 12. Note +that putting a comment after a word is NOT allowed: + + someword # comment that causes an error! ~ + +After the word there is an optional slash and flags. Most of these flags are +letters that indicate the affixes that can be used with this word. These are +specified with SFX and PFX lines in the .aff file, see |spell-SFX| and +|spell-PFX|. Vim allows using other flag types with the FLAG item in the +affix file |spell-FLAG|. + +When the word only has lower-case letters it will also match with the word +starting with an upper-case letter. + +When the word includes an upper-case letter, this means the upper-case letter +is required at this position. The same word with a lower-case letter at this +position will not match. When some of the other letters are upper-case it will +not match either. + +The word with all upper-case characters will always be OK, + + word list matches does not match ~ + als als Als ALS ALs AlS aLs aLS + Als Als ALS als ALs AlS aLs aLS + ALS ALS als Als ALs AlS aLs aLS + AlS AlS ALS als Als ALs aLs aLS + +The KEEPCASE affix ID can be used to specifically match a word with identical +case only, see below |spell-KEEPCASE|. + +Note: in line 5 to 7 non-word characters are used. You can include any +character in a word. When checking the text a word still only matches when it +appears with a non-word character before and after it. For Myspell a word +starting with a non-word character probably won't work. + +In line 12 the word "TCP/IP" is defined. Since the slash has a special +meaning the comma is used instead. This is defined with the SLASH item in the +affix file, see |spell-SLASH|. Note that without this SLASH item the word +will be "TCP,IP". + + +AFFIX FILE FORMAT *spell-aff-format* *spell-affix-vim* + + *spell-affix-comment* +Comment lines in the .aff file start with a '#': + + # comment line ~ + +Items with a fixed number of arguments can be followed by a comment. But only +if none of the arguments can contain white space. The comment must start with +a "#" character. Example: + + KEEPCASE = # fix case for words with this flag ~ + + +ENCODING *spell-SET* + +The affix file can be in any encoding that is supported by "iconv". However, +in some cases the current locale should also be set properly at the time +|:mkspell| is invoked. Adding FOL/LOW/UPP lines removes this requirement +|spell-FOL|. + +The encoding should be specified before anything where the encoding matters. +The encoding applies both to the affix file and the dictionary file. It is +done with a SET line: + + SET utf-8 ~ + +The encoding can be different from the value of the 'encoding' option at the +time ":mkspell" is used. Vim will then convert everything to 'encoding' and +generate a spell file for 'encoding'. If some of the used characters to not +fit in 'encoding' you will get an error message. + *spell-affix-mbyte* +When using a multibyte encoding it's possible to use more different affix +flags. But Myspell doesn't support that, thus you may not want to use it +anyway. For compatibility use an 8-bit encoding. + + +INFORMATION + +These entries in the affix file can be used to add information to the spell +file. There are no restrictions on the format, but they should be in the +right encoding. + + *spell-NAME* *spell-VERSION* *spell-HOME* + *spell-AUTHOR* *spell-EMAIL* *spell-COPYRIGHT* + NAME Name of the language + VERSION 1.0.1 with fixes + HOME http://www.myhome.eu + AUTHOR John Doe + EMAIL john AT Doe DOT net + COPYRIGHT LGPL + +These fields are put in the .spl file as-is. The |:spellinfo| command can be +used to view the info. + + *:spellinfo* *:spelli* +:spelli[nfo] Display the information for the spell file(s) used for + the current buffer. + + +CHARACTER TABLES + *spell-affix-chars* +When using an 8-bit encoding the affix file should define what characters are +word characters. This is because the system where ":mkspell" is used may not +support a locale with this encoding and isalpha() won't work. For example +when using "cp1250" on Unix. + *E761* *E762* *spell-FOL* + *spell-LOW* *spell-UPP* +Three lines in the affix file are needed. Simplistic example: + + FOL áëñ ~ + LOW áëñ ~ + UPP ÁËÑ ~ + +All three lines must have exactly the same number of characters. + +The "FOL" line specifies the case-folded characters. These are used to +compare words while ignoring case. For most encodings this is identical to +the lower case line. + +The "LOW" line specifies the characters in lower-case. Mostly it's equal to +the "FOL" line. + +The "UPP" line specifies the characters with upper-case. That is, a character +is upper-case where it's different from the character at the same position in +"FOL". + +An exception is made for the German sharp s ß. The upper-case version is +"SS". In the FOL/LOW/UPP lines it should be included, so that it's recognized +as a word character, but use the ß character in all three. + +ASCII characters should be omitted, Vim always handles these in the same way. +When the encoding is UTF-8 no word characters need to be specified. + + *E763* +Vim allows you to use spell checking for several languages in the same file. +You can list them in the 'spelllang' option. As a consequence all spell files +for the same encoding must use the same word characters, otherwise they can't +be combined without errors. + +If you get an E763 warning that the word tables differ you need to update your +".spl" spell files. If you downloaded the files, get the latest version of +all spell files you use. If you are only using one, e.g., German, then also +download the recent English spell files. Otherwise generate the .spl file +again with |:mkspell|. If you still get errors check the FOL, LOW and UPP +lines in the used .aff files. + +The XX.ascii.spl spell file generated with the "-ascii" argument will not +contain the table with characters, so that it can be combine with spell files +for any encoding. The .add.spl files also do not contain the table. + + +MID-WORD CHARACTERS + *spell-midword* +Some characters are only to be considered word characters if they are used in +between two ordinary word characters. An example is the single quote: It is +often used to put text in quotes, thus it can't be recognized as a word +character, but when it appears in between word characters it must be part of +the word. This is needed to detect a spelling error such as they'are. That +should be they're, but since "they" and "are" are words themselves that would +go unnoticed. + +These characters are defined with MIDWORD in the .aff file. Example: + + MIDWORD '- ~ + + +FLAG TYPES *spell-FLAG* + +Flags are used to specify the affixes that can be used with a word and for +other properties of the word. Normally single-character flags are used. This +limits the number of possible flags, especially for 8-bit encodings. The FLAG +item can be used if more affixes are to be used. Possible values: + + FLAG long use two-character flags + FLAG num use numbers, from 1 up to 65000 + FLAG caplong use one-character flags without A-Z and two-character + flags that start with A-Z + +With "FLAG num" the numbers in a list of affixes need to be separated with a +comma: "234,2143,1435". This method is inefficient, but useful if the file is +generated with a program. + +When using "caplong" the two-character flags all start with a capital: "Aa", +"B1", "BB", etc. This is useful to use one-character flags for the most +common items and two-character flags for uncommon items. + +Note: When using utf-8 only characters up to 65000 may be used for flags. + +Note: even when using "num" or "long" the number of flags available to +compounding and prefixes is limited to about 250. + + +AFFIXES + *spell-PFX* *spell-SFX* +The usual PFX (prefix) and SFX (suffix) lines are supported (see the Myspell +documentation or the Aspell manual: +http://aspell.net/man-html/Affix-Compression.html). + +Summary: + SFX L Y 2 ~ + SFX L 0 re [^x] ~ + SFX L 0 ro x ~ + +The first line is a header and has four fields: + SFX {flag} {combine} {count} + +{flag} The name used for the suffix. Mostly it's a single letter, + but other characters can be used, see |spell-FLAG|. + +{combine} Can be 'Y' or 'N'. When 'Y' then the word plus suffix can + also have a prefix. When 'N' then a prefix is not allowed. + +{count} The number of lines following. If this is wrong you will get + an error message. + +For PFX the fields are exactly the same. + +The basic format for the following lines is: + SFX {flag} {strip} {add} {condition} {extra} + +{flag} Must be the same as the {flag} used in the first line. + +{strip} Characters removed from the basic word. There is no check if + the characters are actually there, only the length is used (in + bytes). This better match the {condition}, otherwise strange + things may happen. If the {strip} length is equal to or + longer than the basic word the suffix won't be used. + When {strip} is 0 (zero) then nothing is stripped. + +{add} Characters added to the basic word, after removing {strip}. + Optionally there is a '/' followed by flags. The flags apply + to the word plus affix. See |spell-affix-flags| + +{condition} A simplistic pattern. Only when this matches with a basic + word will the suffix be used for that word. This is normally + for using one suffix letter with different {add} and {strip} + fields for words with different endings. + When {condition} is a . (dot) there is no condition. + The pattern may contain: + - Literal characters. + - A set of characters in []. [abc] matches a, b and c. + A dash is allowed for a range [a-c], but this is + Vim-specific. + - A set of characters that starts with a ^, meaning the + complement of the specified characters. [^abc] matches any + character but a, b and c. + +{extra} Optional extra text: + # comment Comment is ignored + - Hunspell uses this, ignored + +For PFX the fields are the same, but the {strip}, {add} and {condition} apply +to the start of the word. + +Note: Myspell ignores any extra text after the relevant info. Vim requires +this text to start with a "#" so that mistakes don't go unnoticed. Example: + + SFX F 0 in [^i]n # Spion > Spionin ~ + SFX F 0 nen in # Bauerin > Bauerinnen ~ + +However, to avoid lots of errors in affix files written for Myspell, you can +add the IGNOREEXTRA flag. + +Apparently Myspell allows an affix name to appear more than once. Since this +might also be a mistake, Vim checks for an extra "S". The affix files for +Myspell that use this feature apparently have this flag. Example: + + SFX a Y 1 S ~ + SFX a 0 an . ~ + + SFX a Y 2 S ~ + SFX a 0 en . ~ + SFX a 0 on . ~ + + +AFFIX FLAGS *spell-affix-flags* + +This is a feature that comes from Hunspell: The affix may specify flags. This +works similar to flags specified on a basic word. The flags apply to the +basic word plus the affix (but there are restrictions). Example: + + SFX S Y 1 ~ + SFX S 0 s . ~ + + SFX A Y 1 ~ + SFX A 0 able/S . ~ + +When the dictionary file contains "drink/AS" then these words are possible: + + drink + drinks uses S suffix + drinkable uses A suffix + drinkables uses A suffix and then S suffix + +Generally the flags of the suffix are added to the flags of the basic word, +both are used for the word plus suffix. But the flags of the basic word are +only used once for affixes, except that both one prefix and one suffix can be +used when both support combining. + +Specifically, the affix flags can be used for: +- Suffixes on suffixes, as in the example above. This works once, thus you + can have two suffixes on a word (plus one prefix). +- Making the word with the affix rare, by using the |spell-RARE| flag. +- Exclude the word with the affix from compounding, by using the + |spell-COMPOUNDFORBIDFLAG| flag. +- Allow the word with the affix to be part of a compound word on the side of + the affix with the |spell-COMPOUNDPERMITFLAG|. +- Use the NEEDCOMPOUND flag: word plus affix can only be used as part of a + compound word. |spell-NEEDCOMPOUND| +- Compound flags: word plus affix can be part of a compound word at the end, + middle, start, etc. The flags are combined with the flags of the basic + word. |spell-compound| +- NEEDAFFIX: another affix is needed to make a valid word. +- CIRCUMFIX, as explained just below. + + +IGNOREEXTRA *spell-IGNOREEXTRA* + +Normally Vim gives an error for an extra field that does not start with '#'. +This avoids errors going unnoticed. However, some files created for Myspell +or Hunspell may contain many entries with an extra field. Use the IGNOREEXTRA +flag to avoid lots of errors. + + +CIRCUMFIX *spell-CIRCUMFIX* + +The CIRCUMFIX flag means a prefix and suffix must be added at the same time. +If a prefix has the CIRCUMFIX flag than only suffixes with the CIRCUMFIX flag +can be added, and the other way around. +An alternative is to only specify the suffix, and give the that suffix two +flags: The required prefix and the NEEDAFFIX flag. |spell-NEEDAFFIX| + + +PFXPOSTPONE *spell-PFXPOSTPONE* + +When an affix file has very many prefixes that apply to many words it's not +possible to build the whole word list in memory. This applies to Hebrew (a +list with all words is over a Gbyte). In that case applying prefixes must be +postponed. This makes spell checking slower. It is indicated by this keyword +in the .aff file: + + PFXPOSTPONE ~ + +Only prefixes without a chop string and without flags can be postponed. +Prefixes with a chop string or with flags will still be included in the word +list. An exception if the chop string is one character and equal to the last +character of the added string, but in lower case. Thus when the chop string +is used to allow the following word to start with an upper case letter. + + +WORDS WITH A SLASH *spell-SLASH* + +The slash is used in the .dic file to separate the basic word from the affix +letters and other flags. Unfortunately, this means you cannot use a slash in +a word. Thus "TCP/IP" is not a word but "TCP" with the flags "IP". To include +a slash in the word put a backslash before it: "TCP\/IP". In the rare case +you want to use a backslash inside a word you need to use two backslashes. +Any other use of the backslash is reserved for future expansion. + + +KEEP-CASE WORDS *spell-KEEPCASE* + +In the affix file a KEEPCASE line can be used to define the affix name used +for keep-case words. Example: + + KEEPCASE = ~ + +This flag is not supported by Myspell. It has the meaning that case matters. +This can be used if the word does not have the first letter in upper case at +the start of a sentence. Example: + + word list matches does not match ~ + 's morgens/= 's morgens 'S morgens 's Morgens 'S MORGENS + 's Morgens 's Morgens 'S MORGENS 'S morgens 's morgens + +The flag can also be used to avoid that the word matches when it is in all +upper-case letters. + + +RARE WORDS *spell-RARE* + +In the affix file a RARE line can be used to define the affix name used for +rare words. Example: + + RARE ? ~ + +Rare words are highlighted differently from bad words. This is to be used for +words that are correct for the language, but are hardly ever used and could be +a typing mistake anyway. When the same word is found as good it won't be +highlighted as rare. + +This flag can also be used on an affix, so that a basic word is not rare but +the basic word plus affix is rare |spell-affix-flags|. However, if the word +also appears as a good word in another way (e.g., in another region) it won't +be marked as rare. + + +BAD WORDS *spell-BAD* + +In the affix file a BAD line can be used to define the affix name used for +bad words. Example: + + BAD ! ~ + +This can be used to exclude words that would otherwise be good. For example +"the the" in the .dic file: + + the the/! ~ + +Once a word has been marked as bad it won't be undone by encountering the same +word as good. + +The flag also applies to the word with affixes, thus this can be used to mark +a whole bunch of related words as bad. + + *spell-FORBIDDENWORD* +FORBIDDENWORD can be used just like BAD. For compatibility with Hunspell. + + *spell-NEEDAFFIX* +The NEEDAFFIX flag is used to require that a word is used with an affix. The +word itself is not a good word (unless there is an empty affix). Example: + + NEEDAFFIX + ~ + + +COMPOUND WORDS *spell-compound* + +A compound word is a longer word made by concatenating words that appear in +the .dic file. To specify which words may be concatenated a character is +used. This character is put in the list of affixes after the word. We will +call this character a flag here. Obviously these flags must be different from +any affix IDs used. + + *spell-COMPOUNDFLAG* +The Myspell compatible method uses one flag, specified with COMPOUNDFLAG. All +words with this flag combine in any order. This means there is no control +over which word comes first. Example: + COMPOUNDFLAG c ~ + + *spell-COMPOUNDRULE* +A more advanced method to specify how compound words can be formed uses +multiple items with multiple flags. This is not compatible with Myspell 3.0. +Let's start with an example: + COMPOUNDRULE c+ ~ + COMPOUNDRULE se ~ + +The first line defines that words with the "c" flag can be concatenated in any +order. The second line defines compound words that are made of one word with +the "s" flag and one word with the "e" flag. With this dictionary: + bork/c ~ + onion/s ~ + soup/e ~ + +You can make these words: + bork + borkbork + borkborkbork + (etc.) + onion + soup + onionsoup + +The COMPOUNDRULE item may appear multiple times. The argument is made out of +one or more groups, where each group can be: + one flag e.g., c + alternate flags inside [] e.g., [abc] +Optionally this may be followed by: + * the group appears zero or more times, e.g., sm*e + + the group appears one or more times, e.g., c+ + ? the group appears zero times or once, e.g., x? + +This is similar to the regexp pattern syntax (but not the same!). A few +examples with the sequence of word flags they require: + COMPOUNDRULE x+ x xx xxx etc. + COMPOUNDRULE yz yz + COMPOUNDRULE x+z xz xxz xxxz etc. + COMPOUNDRULE yx+ yx yxx yxxx etc. + COMPOUNDRULE xy?z xz xyz + + COMPOUNDRULE [abc]z az bz cz + COMPOUNDRULE [abc]+z az aaz abaz bz baz bcbz cz caz cbaz etc. + COMPOUNDRULE a[xyz]+ ax axx axyz ay ayx ayzz az azy azxy etc. + COMPOUNDRULE sm*e se sme smme smmme etc. + COMPOUNDRULE s[xyz]*e se sxe sxye sxyxe sye syze sze szye szyxe etc. + +A specific example: Allow a compound to be made of two words and a dash: + In the .aff file: + COMPOUNDRULE sde ~ + NEEDAFFIX x ~ + COMPOUNDWORDMAX 3 ~ + COMPOUNDMIN 1 ~ + In the .dic file: + start/s ~ + end/e ~ + -/xd ~ + +This allows for the word "start-end", but not "startend". + +An additional implied rule is that, without further flags, a word with a +prefix cannot be compounded after another word, and a word with a suffix +cannot be compounded with a following word. Thus the affix cannot appear +on the inside of a compound word. This can be changed with the +|spell-COMPOUNDPERMITFLAG|. + + *spell-NEEDCOMPOUND* +The NEEDCOMPOUND flag is used to require that a word is used as part of a +compound word. The word itself is not a good word. Example: + + NEEDCOMPOUND & ~ + + *spell-ONLYINCOMPOUND* +The ONLYINCOMPOUND does exactly the same as NEEDCOMPOUND. Supported for +compatibility with Hunspell. + + *spell-COMPOUNDMIN* +The minimal character length of a word used for compounding is specified with +COMPOUNDMIN. Example: + COMPOUNDMIN 5 ~ + +When omitted there is no minimal length. Obviously you could just leave out +the compound flag from short words instead, this feature is present for +compatibility with Myspell. + + *spell-COMPOUNDWORDMAX* +The maximum number of words that can be concatenated into a compound word is +specified with COMPOUNDWORDMAX. Example: + COMPOUNDWORDMAX 3 ~ + +When omitted there is no maximum. It applies to all compound words. + +To set a limit for words with specific flags make sure the items in +COMPOUNDRULE where they appear don't allow too many words. + + *spell-COMPOUNDSYLMAX* +The maximum number of syllables that a compound word may contain is specified +with COMPOUNDSYLMAX. Example: + COMPOUNDSYLMAX 6 ~ + +This has no effect if there is no SYLLABLE item. Without COMPOUNDSYLMAX there +is no limit on the number of syllables. + +If both COMPOUNDWORDMAX and COMPOUNDSYLMAX are defined, a compound word is +accepted if it fits one of the criteria, thus is either made from up to +COMPOUNDWORDMAX words or contains up to COMPOUNDSYLMAX syllables. + + *spell-COMPOUNDFORBIDFLAG* +The COMPOUNDFORBIDFLAG specifies a flag that can be used on an affix. It +means that the word plus affix cannot be used in a compound word. Example: + affix file: + COMPOUNDFLAG c ~ + COMPOUNDFORBIDFLAG x ~ + SFX a Y 2 ~ + SFX a 0 s . ~ + SFX a 0 ize/x . ~ + dictionary: + word/c ~ + util/ac ~ + +This allows for "wordutil" and "wordutils" but not "wordutilize". +Note: this doesn't work for postponed prefixes yet. + + *spell-COMPOUNDPERMITFLAG* +The COMPOUNDPERMITFLAG specifies a flag that can be used on an affix. It +means that the word plus affix can also be used in a compound word in a way +where the affix ends up halfway the word. Without this flag that is not +allowed. +Note: this doesn't work for postponed prefixes yet. + + *spell-COMPOUNDROOT* +The COMPOUNDROOT flag is used for words in the dictionary that are already a +compound. This means it counts for two words when checking the compounding +rules. Can also be used for an affix to count the affix as a compounding +word. + + *spell-CHECKCOMPOUNDPATTERN* +CHECKCOMPOUNDPATTERN is used to define patterns that, when matching at the +position where two words are compounded together forbids the compound. +For example: + CHECKCOMPOUNDPATTERN o e ~ + +This forbids compounding if the first word ends in "o" and the second word +starts with "e". + +The arguments must be plain text, no patterns are actually supported, despite +the item name. Case is always ignored. + +The Hunspell feature to use three arguments and flags is not supported. + + *spell-NOCOMPOUNDSUGS* +This item indicates that using compounding to make suggestions is not a good +idea. Use this when compounding is used with very short or one-character +words. E.g. to make numbers out of digits. Without this flag creating +suggestions would spend most time trying all kind of weird compound words. + + NOCOMPOUNDSUGS ~ + + *spell-SYLLABLE* +The SYLLABLE item defines characters or character sequences that are used to +count the number of syllables in a word. Example: + SYLLABLE aáeéiíoóöõuúüûy/aa/au/ea/ee/ei/ie/oa/oe/oo/ou/uu/ui ~ + +Before the first slash is the set of characters that are counted for one +syllable, also when repeated and mixed, until the next character that is not +in this set. After the slash come sequences of characters that are counted +for one syllable. These are preferred over using characters from the set. +With the example "ideeen" has three syllables, counted by "i", "ee" and "e". + +Only case-folded letters need to be included. + +Another way to restrict compounding was mentioned above: Adding the +|spell-COMPOUNDFORBIDFLAG| flag to an affix causes all words that are made +with that affix to not be used for compounding. + + +UNLIMITED COMPOUNDING *spell-NOBREAK* + +For some languages, such as Thai, there is no space in between words. This +looks like all words are compounded. To specify this use the NOBREAK item in +the affix file, without arguments: + NOBREAK ~ + +Vim will try to figure out where one word ends and a next starts. When there +are spelling mistakes this may not be quite right. + + + *spell-COMMON* +Common words can be specified with the COMMON item. This will give better +suggestions when editing a short file. Example: + + COMMON the of to and a in is it you that he she was for on are ~ + +The words must be separated by white space, up to 25 per line. +When multiple regions are specified in a ":mkspell" command the common words +for all regions are combined and used for all regions. + + *spell-NOSPLITSUGS* +This item indicates that splitting a word to make suggestions is not a good +idea. Split-word suggestions will appear only when there are few similar +words. + + NOSPLITSUGS ~ + + *spell-NOSUGGEST* +The flag specified with NOSUGGEST can be used for words that will not be +suggested. Can be used for obscene words. + + NOSUGGEST % ~ + + +REPLACEMENTS *spell-REP* + +In the affix file REP items can be used to define common mistakes. This is +used to make spelling suggestions. The items define the "from" text and the +"to" replacement. Example: + + REP 4 ~ + REP f ph ~ + REP ph f ~ + REP k ch ~ + REP ch k ~ + +The first line specifies the number of REP lines following. Vim ignores the +number, but it must be there (for compatibility with Myspell). + +Don't include simple one-character replacements or swaps. Vim will try these +anyway. You can include whole words if you want to, but you might want to use +the "file:" item in 'spellsuggest' instead. + +You can include a space by using an underscore: + + REP the_the the ~ + + +SIMILAR CHARACTERS *spell-MAP* *E783* + +In the affix file MAP items can be used to define letters that are very much +alike. This is mostly used for a letter with different accents. This is used +to prefer suggestions with these letters substituted. Example: + + MAP 2 ~ + MAP eéëêè ~ + MAP uüùúû ~ + +The first line specifies the number of MAP lines following. Vim ignores the +number, but the line must be there. + +Each letter must appear in only one of the MAP items. It's a bit more +efficient if the first letter is ASCII or at least one without accents. + + +.SUG FILE *spell-NOSUGFILE* + +When soundfolding is specified in the affix file then ":mkspell" will normally +produce a .sug file next to the .spl file. This file is used to find +suggestions by their sound-a-like form quickly. At the cost of a lot of +memory (the amount depends on the number of words, |:mkspell| will display an +estimate when it's done). + +To avoid producing a .sug file use this item in the affix file: + + NOSUGFILE ~ + +Users can simply omit the .sug file if they don't want to use it. + + +SOUND-A-LIKE *spell-SAL* + +In the affix file SAL items can be used to define the sounds-a-like mechanism +to be used. The main items define the "from" text and the "to" replacement. +Simplistic example: + + SAL CIA X ~ + SAL CH X ~ + SAL C K ~ + SAL K K ~ + +There are a few rules and this can become quite complicated. An explanation +how it works can be found in the Aspell manual: +http://aspell.net/man-html/Phonetic-Code.html. + +There are a few special items: + + SAL followup true ~ + SAL collapse_result true ~ + SAL remove_accents true ~ + +"1" has the same meaning as "true". Any other value means "false". + + +SIMPLE SOUNDFOLDING *spell-SOFOFROM* *spell-SOFOTO* + +The SAL mechanism is complex and slow. A simpler mechanism is mapping all +characters to another character, mapping similar sounding characters to the +same character. At the same time this does case folding. You can not have +both SAL items and simple soundfolding. + +There are two items required: one to specify the characters that are mapped +and one that specifies the characters they are mapped to. They must have +exactly the same number of characters. Example: + + SOFOFROM abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ ~ + SOFOTO ebctefghejklnnepkrstevvkesebctefghejklnnepkrstevvkes ~ + +In the example all vowels are mapped to the same character 'e'. Another +method would be to leave out all vowels. Some characters that sound nearly +the same and are often mixed up, such as 'm' and 'n', are mapped to the same +character. Don't do this too much, all words will start looking alike. + +Characters that do not appear in SOFOFROM will be left out, except that all +white space is replaced by one space. Sequences of the same character in +SOFOFROM are replaced by one. + +You can use the |soundfold()| function to try out the results. Or set the +'verbose' option to see the score in the output of the |z=| command. + + +UNSUPPORTED ITEMS *spell-affix-not-supported* + +These items appear in the affix file of other spell checkers. In Vim they are +ignored, not supported or defined in another way. + +ACCENT (Hunspell) *spell-ACCENT* + Use MAP instead. |spell-MAP| + +BREAK (Hunspell) *spell-BREAK* + Define break points. Unclear how it works exactly. + Not supported. + +CHECKCOMPOUNDCASE (Hunspell) *spell-CHECKCOMPOUNDCASE* + Disallow uppercase letters at compound word boundaries. + Not supported. + +CHECKCOMPOUNDDUP (Hunspell) *spell-CHECKCOMPOUNDDUP* + Disallow using the same word twice in a compound. Not + supported. + +CHECKCOMPOUNDREP (Hunspell) *spell-CHECKCOMPOUNDREP* + Something about using REP items and compound words. Not + supported. + +CHECKCOMPOUNDTRIPLE (Hunspell) *spell-CHECKCOMPOUNDTRIPLE* + Forbid three identical characters when compounding. Not + supported. + +CHECKSHARPS (Hunspell)) *spell-CHECKSHARPS* + SS letter pair in uppercased (German) words may be upper case + sharp s (ß). Not supported. + +COMPLEXPREFIXES (Hunspell) *spell-COMPLEXPREFIXES* + Enables using two prefixes. Not supported. + +COMPOUND (Hunspell) *spell-COMPOUND* + This is one line with the count of COMPOUND items, followed by + that many COMPOUND lines with a pattern. + Remove the first line with the count and rename the other + items to COMPOUNDRULE |spell-COMPOUNDRULE| + +COMPOUNDFIRST (Hunspell) *spell-COMPOUNDFIRST* + Use COMPOUNDRULE instead. |spell-COMPOUNDRULE| + +COMPOUNDBEGIN (Hunspell) *spell-COMPOUNDBEGIN* + Words signed with COMPOUNDBEGIN may be first elements in + compound words. + Use COMPOUNDRULE instead. |spell-COMPOUNDRULE| + +COMPOUNDLAST (Hunspell) *spell-COMPOUNDLAST* + Words signed with COMPOUNDLAST may be last elements in + compound words. + Use COMPOUNDRULE instead. |spell-COMPOUNDRULE| + +COMPOUNDEND (Hunspell) *spell-COMPOUNDEND* + Probably the same as COMPOUNDLAST + +COMPOUNDMIDDLE (Hunspell) *spell-COMPOUNDMIDDLE* + Words signed with COMPOUNDMIDDLE may be middle elements in + compound words. + Use COMPOUNDRULE instead. |spell-COMPOUNDRULE| + +COMPOUNDRULES (Hunspell) *spell-COMPOUNDRULES* + Number of COMPOUNDRULE lines following. Ignored, but the + argument must be a number. + +COMPOUNDSYLLABLE (Hunspell) *spell-COMPOUNDSYLLABLE* + Use SYLLABLE and COMPOUNDSYLMAX instead. |spell-SYLLABLE| + |spell-COMPOUNDSYLMAX| + +KEY (Hunspell) *spell-KEY* + Define characters that are close together on the keyboard. + Used to give better suggestions. Not supported. + +LANG (Hunspell) *spell-LANG* + This specifies language-specific behavior. This actually + moves part of the language knowledge into the program, + therefore Vim does not support it. Each language property + must be specified separately. + +LEMMA_PRESENT (Hunspell) *spell-LEMMA_PRESENT* + Only needed for morphological analysis. + +MAXNGRAMSUGS (Hunspell) *spell-MAXNGRAMSUGS* + Set number of n-gram suggestions. Not supported. + +PSEUDOROOT (Hunspell) *spell-PSEUDOROOT* + Use NEEDAFFIX instead. |spell-NEEDAFFIX| + +SUGSWITHDOTS (Hunspell) *spell-SUGSWITHDOTS* + Adds dots to suggestions. Vim doesn't need this. + +SYLLABLENUM (Hunspell) *spell-SYLLABLENUM* + Not supported. + +TRY (Myspell, Hunspell, others) *spell-TRY* + Vim does not use the TRY item, it is ignored. For making + suggestions the actual characters in the words are used, that + is much more efficient. + +WORDCHARS (Hunspell) *spell-WORDCHARS* + Used to recognize words. Vim doesn't need it, because there + is no need to separate words before checking them (using a + trie instead of a hashtable). + + vim:tw=78:sw=4:ts=8:noet:ft=help:norl: |