diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 14:19:18 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 14:19:18 +0000 |
commit | 4035b1bfb1e5843a539a8b624d21952b756974d1 (patch) | |
tree | f1e9cd5bf548cbc57ff2fddfb2b4aa9ae95587e2 /src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c | |
parent | Initial commit. (diff) | |
download | virtualbox-4035b1bfb1e5843a539a8b624d21952b756974d1.tar.xz virtualbox-4035b1bfb1e5843a539a8b624d21952b756974d1.zip |
Adding upstream version 6.1.22-dfsg.upstream/6.1.22-dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c')
-rw-r--r-- | src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c | 1308 |
1 files changed, 1308 insertions, 0 deletions
diff --git a/src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c b/src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c new file mode 100644 index 00000000..b46f7d65 --- /dev/null +++ b/src/VBox/Additions/common/VBoxGuest/VBoxGuest-linux.c @@ -0,0 +1,1308 @@ +/* $Id: VBoxGuest-linux.c $ */ +/** @file + * VBoxGuest - Linux specifics. + * + * Note. Unfortunately, the difference between this and SUPDrv-linux.c is + * a little bit too big to be helpful. + */ + +/* + * Copyright (C) 2006-2020 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + + +/********************************************************************************************************************************* +* Header Files * +*********************************************************************************************************************************/ +#define LOG_GROUP LOG_GROUP_SUP_DRV + +#include "the-linux-kernel.h" + +#if RTLNX_VER_MIN(2,6,15) +# define VBOXGUEST_WITH_INPUT_DRIVER +#endif + +#if RTLNX_VER_MIN(4,15,0) +# define CONST_4_15 const +#else +# define CONST_4_15 +#endif + +#include "VBoxGuestInternal.h" +#ifdef VBOXGUEST_WITH_INPUT_DRIVER +# include <linux/input.h> +#endif +#include <linux/miscdevice.h> +#include <linux/poll.h> +#if RTLNX_VER_MIN(2,6,28) +# include <linux/tty.h> +#endif +#include <VBox/version.h> +#include "revision-generated.h" + +#include <iprt/assert.h> +#include <iprt/asm.h> +#include <iprt/ctype.h> +#include <iprt/initterm.h> +#include <iprt/mem.h> +#include <iprt/mp.h> +#include <iprt/process.h> +#include <iprt/spinlock.h> +#include <iprt/semaphore.h> +#include <iprt/string.h> +#include <VBox/err.h> +#include <VBox/log.h> + + +/********************************************************************************************************************************* +* Defined Constants And Macros * +*********************************************************************************************************************************/ +/** The device name. */ +#define DEVICE_NAME "vboxguest" +/** The device name for the device node open to everyone. */ +#define DEVICE_NAME_USER "vboxuser" +/** The name of the PCI driver */ +#define DRIVER_NAME DEVICE_NAME + + +/* 2.4.x compatibility macros that may or may not be defined. */ +#ifndef IRQ_RETVAL +# define irqreturn_t void +# define IRQ_RETVAL(n) +#endif + +/* uidgid.h was introduced in 3.5.0. */ +#if RTLNX_VER_MAX(3,5,0) +# define kgid_t gid_t +# define kuid_t uid_t +#endif + + +/********************************************************************************************************************************* +* Internal Functions * +*********************************************************************************************************************************/ +static void vgdrvLinuxTermPci(struct pci_dev *pPciDev); +static int vgdrvLinuxProbePci(struct pci_dev *pPciDev, const struct pci_device_id *id); +static int __init vgdrvLinuxModInit(void); +static void __exit vgdrvLinuxModExit(void); +static int vgdrvLinuxOpen(struct inode *pInode, struct file *pFilp); +static int vgdrvLinuxRelease(struct inode *pInode, struct file *pFilp); +#ifdef HAVE_UNLOCKED_IOCTL +static long vgdrvLinuxIOCtl(struct file *pFilp, unsigned int uCmd, unsigned long ulArg); +#else +static int vgdrvLinuxIOCtl(struct inode *pInode, struct file *pFilp, unsigned int uCmd, unsigned long ulArg); +#endif +static int vgdrvLinuxIOCtlSlow(struct file *pFilp, unsigned int uCmd, unsigned long ulArg, PVBOXGUESTSESSION pSession); +static int vgdrvLinuxFAsync(int fd, struct file *pFile, int fOn); +static unsigned int vgdrvLinuxPoll(struct file *pFile, poll_table *pPt); +static ssize_t vgdrvLinuxRead(struct file *pFile, char *pbBuf, size_t cbRead, loff_t *poff); + + +/********************************************************************************************************************************* +* Global Variables * +*********************************************************************************************************************************/ +/** + * Device extention & session data association structure. + */ +static VBOXGUESTDEVEXT g_DevExt; +/** The PCI device. */ +static struct pci_dev *g_pPciDev = NULL; +/** The base of the I/O port range. */ +static RTIOPORT g_IOPortBase; +/** The base of the MMIO range. */ +static RTHCPHYS g_MMIOPhysAddr = NIL_RTHCPHYS; +/** The size of the MMIO range as seen by PCI. */ +static uint32_t g_cbMMIO; +/** The pointer to the mapping of the MMIO range. */ +static void *g_pvMMIOBase; +/** Wait queue used by polling. */ +static wait_queue_head_t g_PollEventQueue; +/** Asynchronous notification stuff. */ +static struct fasync_struct *g_pFAsyncQueue; +#ifdef VBOXGUEST_WITH_INPUT_DRIVER +/** Pre-allocated mouse status VMMDev request for use in the IRQ + * handler. */ +static VMMDevReqMouseStatus *g_pMouseStatusReq; +#endif +#if RTLNX_VER_MIN(2,6,0) +/** Whether we've create the logger or not. */ +static volatile bool g_fLoggerCreated; +/** Release logger group settings. */ +static char g_szLogGrp[128]; +/** Release logger flags settings. */ +static char g_szLogFlags[128]; +/** Release logger destination settings. */ +static char g_szLogDst[128]; +# if 0 +/** Debug logger group settings. */ +static char g_szDbgLogGrp[128]; +/** Debug logger flags settings. */ +static char g_szDbgLogFlags[128]; +/** Debug logger destination settings. */ +static char g_szDbgLogDst[128]; +# endif +#endif + +/** The input device handle */ +#ifdef VBOXGUEST_WITH_INPUT_DRIVER +static struct input_dev *g_pInputDevice = NULL; +#endif + +/** The file_operations structure. */ +static struct file_operations g_FileOps = +{ + owner: THIS_MODULE, + open: vgdrvLinuxOpen, + release: vgdrvLinuxRelease, +#ifdef HAVE_UNLOCKED_IOCTL + unlocked_ioctl: vgdrvLinuxIOCtl, +#else + ioctl: vgdrvLinuxIOCtl, +#endif + fasync: vgdrvLinuxFAsync, + read: vgdrvLinuxRead, + poll: vgdrvLinuxPoll, + llseek: no_llseek, +}; + +/** The miscdevice structure. */ +static struct miscdevice g_MiscDevice = +{ + minor: MISC_DYNAMIC_MINOR, + name: DEVICE_NAME, + fops: &g_FileOps, +}; + +/** The file_operations structure for the user device. + * @remarks For the time being we'll be using the same implementation as + * /dev/vboxguest here. */ +static struct file_operations g_FileOpsUser = +{ + owner: THIS_MODULE, + open: vgdrvLinuxOpen, + release: vgdrvLinuxRelease, +#ifdef HAVE_UNLOCKED_IOCTL + unlocked_ioctl: vgdrvLinuxIOCtl, +#else + ioctl: vgdrvLinuxIOCtl, +#endif +}; + +/** The miscdevice structure for the user device. */ +static struct miscdevice g_MiscDeviceUser = +{ + minor: MISC_DYNAMIC_MINOR, + name: DEVICE_NAME_USER, + fops: &g_FileOpsUser, +}; + + +/** PCI hotplug structure. */ +static const struct pci_device_id g_VBoxGuestPciId[] = +{ + { + vendor: VMMDEV_VENDORID, + device: VMMDEV_DEVICEID + }, + { + /* empty entry */ + } +}; + +MODULE_DEVICE_TABLE(pci, g_VBoxGuestPciId); + +/** Structure for registering the PCI driver. */ +static struct pci_driver g_PciDriver = +{ + name: DRIVER_NAME, + id_table: g_VBoxGuestPciId, + probe: vgdrvLinuxProbePci, + remove: vgdrvLinuxTermPci +}; + +#ifdef VBOXGUEST_WITH_INPUT_DRIVER +/** Kernel IDC session to ourselves for use with the mouse events. */ +static PVBOXGUESTSESSION g_pKernelSession = NULL; +#endif + + + +/** + * Converts a VBox status code to a linux error code. + * + * @returns corresponding negative linux error code. + * @param rc supdrv error code (SUPDRV_ERR_* defines). + */ +static int vgdrvLinuxConvertToNegErrno(int rc) +{ + if ( rc > -1000 + && rc < 1000) + return -RTErrConvertToErrno(rc); + switch (rc) + { + case VERR_HGCM_SERVICE_NOT_FOUND: return -ESRCH; + case VINF_HGCM_CLIENT_REJECTED: return 0; + case VERR_HGCM_INVALID_CMD_ADDRESS: return -EFAULT; + case VINF_HGCM_ASYNC_EXECUTE: return 0; + case VERR_HGCM_INTERNAL: return -EPROTO; + case VERR_HGCM_INVALID_CLIENT_ID: return -EINVAL; + case VINF_HGCM_SAVE_STATE: return 0; + /* No reason to return this to a guest */ + // case VERR_HGCM_SERVICE_EXISTS: return -EEXIST; + default: + AssertMsgFailed(("Unhandled error code %Rrc\n", rc)); + return -EPROTO; + } +} + + +/** + * Does the PCI detection and init of the device. + * + * @returns 0 on success, negated errno on failure. + */ +static int vgdrvLinuxProbePci(struct pci_dev *pPciDev, const struct pci_device_id *id) +{ + int rc; + + NOREF(id); + AssertReturn(!g_pPciDev, -EINVAL); + rc = pci_enable_device(pPciDev); + if (rc >= 0) + { + /* I/O Ports are mandatory, the MMIO bit is not. */ + g_IOPortBase = pci_resource_start(pPciDev, 0); + if (g_IOPortBase != 0) + { + /* + * Map the register address space. + */ + g_MMIOPhysAddr = pci_resource_start(pPciDev, 1); + g_cbMMIO = pci_resource_len(pPciDev, 1); + if (request_mem_region(g_MMIOPhysAddr, g_cbMMIO, DEVICE_NAME) != NULL) + { + g_pvMMIOBase = ioremap(g_MMIOPhysAddr, g_cbMMIO); + if (g_pvMMIOBase) + { + /** @todo why aren't we requesting ownership of the I/O ports as well? */ + g_pPciDev = pPciDev; + return 0; + } + + /* failure cleanup path */ + LogRel((DEVICE_NAME ": ioremap failed; MMIO Addr=%RHp cb=%#x\n", g_MMIOPhysAddr, g_cbMMIO)); + rc = -ENOMEM; + release_mem_region(g_MMIOPhysAddr, g_cbMMIO); + } + else + { + LogRel((DEVICE_NAME ": failed to obtain adapter memory\n")); + rc = -EBUSY; + } + g_MMIOPhysAddr = NIL_RTHCPHYS; + g_cbMMIO = 0; + g_IOPortBase = 0; + } + else + { + LogRel((DEVICE_NAME ": did not find expected hardware resources\n")); + rc = -ENXIO; + } + pci_disable_device(pPciDev); + } + else + LogRel((DEVICE_NAME ": could not enable device: %d\n", rc)); + return rc; +} + + +/** + * Clean up the usage of the PCI device. + */ +static void vgdrvLinuxTermPci(struct pci_dev *pPciDev) +{ + g_pPciDev = NULL; + if (pPciDev) + { + iounmap(g_pvMMIOBase); + g_pvMMIOBase = NULL; + + release_mem_region(g_MMIOPhysAddr, g_cbMMIO); + g_MMIOPhysAddr = NIL_RTHCPHYS; + g_cbMMIO = 0; + + pci_disable_device(pPciDev); + } +} + + +/** + * Interrupt service routine. + * + * @returns In 2.4 it returns void. + * In 2.6 we indicate whether we've handled the IRQ or not. + * + * @param iIrq The IRQ number. + * @param pvDevId The device ID, a pointer to g_DevExt. + * @param pRegs Register set. Removed in 2.6.19. + */ +#if RTLNX_VER_MIN(2,6,19) && !defined(DOXYGEN_RUNNING) +static irqreturn_t vgdrvLinuxISR(int iIrq, void *pvDevId) +#else +static irqreturn_t vgdrvLinuxISR(int iIrq, void *pvDevId, struct pt_regs *pRegs) +#endif +{ + bool fTaken = VGDrvCommonISR(&g_DevExt); + return IRQ_RETVAL(fTaken); +} + + +/** + * Registers the ISR and initializes the poll wait queue. + */ +static int __init vgdrvLinuxInitISR(void) +{ + int rc; + + init_waitqueue_head(&g_PollEventQueue); + rc = request_irq(g_pPciDev->irq, + vgdrvLinuxISR, +#if RTLNX_VER_MIN(2,6,20) + IRQF_SHARED, +#else + SA_SHIRQ, +#endif + DEVICE_NAME, + &g_DevExt); + if (rc) + { + LogRel((DEVICE_NAME ": could not request IRQ %d: err=%d\n", g_pPciDev->irq, rc)); + return rc; + } + return 0; +} + + +/** + * Deregisters the ISR. + */ +static void vgdrvLinuxTermISR(void) +{ + free_irq(g_pPciDev->irq, &g_DevExt); +} + + +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + +/** + * Reports the mouse integration status to the host. + * + * Calls the kernel IOCtl to report mouse status to the host on behalf of + * our kernel session. + * + * @param fStatus The mouse status to report. + */ +static int vgdrvLinuxSetMouseStatus(uint32_t fStatus) +{ + int rc; + VBGLIOCSETMOUSESTATUS Req; + VBGLREQHDR_INIT(&Req.Hdr, SET_MOUSE_STATUS); + Req.u.In.fStatus = fStatus; + rc = VGDrvCommonIoCtl(VBGL_IOCTL_SET_MOUSE_STATUS, &g_DevExt, g_pKernelSession, &Req.Hdr, sizeof(Req)); + if (RT_SUCCESS(rc)) + rc = Req.Hdr.rc; + return rc; +} + + +/** + * Called when the input device is first opened. + * + * Sets up absolute mouse reporting. + */ +static int vboxguestOpenInputDevice(struct input_dev *pDev) +{ + int rc = vgdrvLinuxSetMouseStatus(VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE | VMMDEV_MOUSE_NEW_PROTOCOL); + if (RT_FAILURE(rc)) + return ENODEV; + NOREF(pDev); + return 0; +} + + +/** + * Called if all open handles to the input device are closed. + * + * Disables absolute reporting. + */ +static void vboxguestCloseInputDevice(struct input_dev *pDev) +{ + NOREF(pDev); + vgdrvLinuxSetMouseStatus(0); +} + + +/** + * Creates the kernel input device. + */ +static int __init vgdrvLinuxCreateInputDevice(void) +{ + int rc = VbglR0GRAlloc((VMMDevRequestHeader **)&g_pMouseStatusReq, sizeof(*g_pMouseStatusReq), VMMDevReq_GetMouseStatus); + if (RT_SUCCESS(rc)) + { + g_pInputDevice = input_allocate_device(); + if (g_pInputDevice) + { + g_pInputDevice->id.bustype = BUS_PCI; + g_pInputDevice->id.vendor = VMMDEV_VENDORID; + g_pInputDevice->id.product = VMMDEV_DEVICEID; + g_pInputDevice->id.version = VBOX_SHORT_VERSION; + g_pInputDevice->open = vboxguestOpenInputDevice; + g_pInputDevice->close = vboxguestCloseInputDevice; +# if RTLNX_VER_MAX(2,6,22) + g_pInputDevice->cdev.dev = &g_pPciDev->dev; +# else + g_pInputDevice->dev.parent = &g_pPciDev->dev; +# endif + rc = input_register_device(g_pInputDevice); + if (rc == 0) + { + /* Do what one of our competitors apparently does as that works. */ + ASMBitSet(g_pInputDevice->evbit, EV_ABS); + ASMBitSet(g_pInputDevice->evbit, EV_KEY); +# ifdef EV_SYN + ASMBitSet(g_pInputDevice->evbit, EV_SYN); +# endif + input_set_abs_params(g_pInputDevice, ABS_X, VMMDEV_MOUSE_RANGE_MIN, VMMDEV_MOUSE_RANGE_MAX, 0, 0); + input_set_abs_params(g_pInputDevice, ABS_Y, VMMDEV_MOUSE_RANGE_MIN, VMMDEV_MOUSE_RANGE_MAX, 0, 0); + ASMBitSet(g_pInputDevice->keybit, BTN_MOUSE); + /** @todo this string should be in a header file somewhere. */ + g_pInputDevice->name = "VirtualBox mouse integration"; + return 0; + } + + input_free_device(g_pInputDevice); + } + else + rc = -ENOMEM; + VbglR0GRFree(&g_pMouseStatusReq->header); + g_pMouseStatusReq = NULL; + } + else + rc = -ENOMEM; + return rc; +} + + +/** + * Terminates the kernel input device. + */ +static void vgdrvLinuxTermInputDevice(void) +{ + VbglR0GRFree(&g_pMouseStatusReq->header); + g_pMouseStatusReq = NULL; + + /* See documentation of input_register_device(): input_free_device() + * should not be called after a device has been registered. */ + input_unregister_device(g_pInputDevice); +} + +#endif /* VBOXGUEST_WITH_INPUT_DRIVER */ + +/** + * Creates the device nodes. + * + * @returns 0 on success, negated errno on failure. + */ +static int __init vgdrvLinuxInitDeviceNodes(void) +{ + /* + * The full feature device node. + */ + int rc = misc_register(&g_MiscDevice); + if (!rc) + { + /* + * The device node intended to be accessible by all users. + */ + rc = misc_register(&g_MiscDeviceUser); + if (!rc) + return 0; + LogRel((DEVICE_NAME ": misc_register failed for %s (rc=%d)\n", DEVICE_NAME_USER, rc)); + misc_deregister(&g_MiscDevice); + } + else + LogRel((DEVICE_NAME ": misc_register failed for %s (rc=%d)\n", DEVICE_NAME, rc)); + return rc; +} + + +/** + * Deregisters the device nodes. + */ +static void vgdrvLinuxTermDeviceNodes(void) +{ + misc_deregister(&g_MiscDevice); + misc_deregister(&g_MiscDeviceUser); +} + + +/** + * Initialize module. + * + * @returns appropriate status code. + */ +static int __init vgdrvLinuxModInit(void) +{ + static const char * const s_apszGroups[] = VBOX_LOGGROUP_NAMES; + PRTLOGGER pRelLogger; + int rc; + + /* + * Initialize IPRT first. + */ + rc = RTR0Init(0); + if (RT_FAILURE(rc)) + { + printk(KERN_ERR DEVICE_NAME ": RTR0Init failed, rc=%d.\n", rc); + return -EINVAL; + } + + /* + * Create the release log. + * (We do that here instead of common code because we want to log + * early failures using the LogRel macro.) + */ + rc = RTLogCreate(&pRelLogger, 0 /* fFlags */, "all", + "VBOX_RELEASE_LOG", RT_ELEMENTS(s_apszGroups), s_apszGroups, + RTLOGDEST_STDOUT | RTLOGDEST_DEBUGGER | RTLOGDEST_USER, NULL); + if (RT_SUCCESS(rc)) + { +#if RTLNX_VER_MIN(2,6,0) + RTLogGroupSettings(pRelLogger, g_szLogGrp); + RTLogFlags(pRelLogger, g_szLogFlags); + RTLogDestinations(pRelLogger, g_szLogDst); +#endif + RTLogRelSetDefaultInstance(pRelLogger); + } +#if RTLNX_VER_MIN(2,6,0) + g_fLoggerCreated = true; +#endif + + /* + * Locate and initialize the PCI device. + */ + rc = pci_register_driver(&g_PciDriver); + if (rc >= 0 && g_pPciDev) + { + /* + * Call the common device extension initializer. + */ +#if RTLNX_VER_MIN(2,6,0) && defined(RT_ARCH_X86) + VBOXOSTYPE enmOSType = VBOXOSTYPE_Linux26; +#elif RTLNX_VER_MIN(2,6,0) && defined(RT_ARCH_AMD64) + VBOXOSTYPE enmOSType = VBOXOSTYPE_Linux26_x64; +#elif RTLNX_VER_MIN(2,4,0) && defined(RT_ARCH_X86) + VBOXOSTYPE enmOSType = VBOXOSTYPE_Linux24; +#elif RTLNX_VER_MIN(2,4,0) && defined(RT_ARCH_AMD64) + VBOXOSTYPE enmOSType = VBOXOSTYPE_Linux24_x64; +#else +# warning "huh? which arch + version is this?" + VBOXOSTYPE enmOsType = VBOXOSTYPE_Linux; +#endif + rc = VGDrvCommonInitDevExt(&g_DevExt, + g_IOPortBase, + g_pvMMIOBase, + g_cbMMIO, + enmOSType, + VMMDEV_EVENT_MOUSE_POSITION_CHANGED); + if (RT_SUCCESS(rc)) + { + /* + * Register the interrupt service routine for it now that g_DevExt can handle IRQs. + */ + rc = vgdrvLinuxInitISR(); + if (rc >= 0) /** @todo r=bird: status check differs from that inside vgdrvLinuxInitISR. */ + { +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + /* + * Create the kernel session for this driver. + */ + rc = VGDrvCommonCreateKernelSession(&g_DevExt, &g_pKernelSession); + if (RT_SUCCESS(rc)) + { + /* + * Create the kernel input device. + */ + rc = vgdrvLinuxCreateInputDevice(); + if (rc >= 0) + { +#endif + /* + * Read host configuration. + */ + VGDrvCommonProcessOptionsFromHost(&g_DevExt); + + /* + * Finally, create the device nodes. + */ + rc = vgdrvLinuxInitDeviceNodes(); + if (rc >= 0) + { + /* some useful information for the user but don't show this on the console */ + LogRel((DEVICE_NAME ": Successfully loaded version " VBOX_VERSION_STRING " r" __stringify(VBOX_SVN_REV) "\n")); + LogRel((DEVICE_NAME ": misc device minor %d, IRQ %d, I/O port %RTiop, MMIO at %RHp (size 0x%x)\n", + g_MiscDevice.minor, g_pPciDev->irq, g_IOPortBase, g_MMIOPhysAddr, g_cbMMIO)); + printk(KERN_DEBUG DEVICE_NAME ": Successfully loaded version " + VBOX_VERSION_STRING " r" __stringify(VBOX_SVN_REV) " (interface " RT_XSTR(VMMDEV_VERSION) ")\n"); + return rc; + } + + /* bail out */ +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + vgdrvLinuxTermInputDevice(); + } + else + { + LogRel((DEVICE_NAME ": vboxguestCreateInputDevice failed with rc=%Rrc\n", rc)); + rc = RTErrConvertFromErrno(rc); + } + VGDrvCommonCloseSession(&g_DevExt, g_pKernelSession); + } +#endif + vgdrvLinuxTermISR(); + } + VGDrvCommonDeleteDevExt(&g_DevExt); + } + else + { + LogRel((DEVICE_NAME ": VGDrvCommonInitDevExt failed with rc=%Rrc\n", rc)); + rc = RTErrConvertFromErrno(rc); + } + } + else + { + LogRel((DEVICE_NAME ": PCI device not found, probably running on physical hardware.\n")); + rc = -ENODEV; + } + pci_unregister_driver(&g_PciDriver); + RTLogDestroy(RTLogRelSetDefaultInstance(NULL)); + RTLogDestroy(RTLogSetDefaultInstance(NULL)); + RTR0Term(); + return rc; +} + + +/** + * Unload the module. + */ +static void __exit vgdrvLinuxModExit(void) +{ + /* + * Inverse order of init. + */ + vgdrvLinuxTermDeviceNodes(); +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + vgdrvLinuxTermInputDevice(); + VGDrvCommonCloseSession(&g_DevExt, g_pKernelSession); +#endif + vgdrvLinuxTermISR(); + VGDrvCommonDeleteDevExt(&g_DevExt); + pci_unregister_driver(&g_PciDriver); + RTLogDestroy(RTLogRelSetDefaultInstance(NULL)); + RTLogDestroy(RTLogSetDefaultInstance(NULL)); + RTR0Term(); +} + + +/** + * Get the process user ID. + * + * @returns UID. + */ +DECLINLINE(RTUID) vgdrvLinuxGetUid(void) +{ +#if RTLNX_VER_MIN(2,6,29) +# if RTLNX_VER_MIN(3,5,0) + return from_kuid(current_user_ns(), current->cred->uid); +# else + return current->cred->uid; +# endif +#else + return current->uid; +#endif +} + + +/** + * Checks if the given group number is zero or not. + * + * @returns true / false. + * @param gid The group to check for. + */ +DECLINLINE(bool) vgdrvLinuxIsGroupZero(kgid_t gid) +{ +#if RTLNX_VER_MIN(3,5,0) + return from_kgid(current_user_ns(), gid); +#else + return gid == 0; +#endif +} + + +/** + * Searches the effective group and supplementary groups for @a gid. + * + * @returns true if member, false if not. + * @param gid The group to check for. + */ +DECLINLINE(RTGID) vgdrvLinuxIsInGroupEff(kgid_t gid) +{ + return in_egroup_p(gid) != 0; +} + + +/** + * Check if we can positively or negatively determine that the process is + * running under a login on the physical machine console. + * + * Havne't found a good way to figure this out for graphical sessions, so this + * is mostly pointless. But let us try do what we can do. + * + * @returns VMMDEV_REQUESTOR_CON_XXX. + */ +static uint32_t vgdrvLinuxRequestorOnConsole(void) +{ + uint32_t fRet = VMMDEV_REQUESTOR_CON_DONT_KNOW; + +#if RTLNX_VER_MIN(2,6,28) /* First with tty_kref_put(). */ + /* + * Check for tty0..63, ASSUMING that these are only used for the physical console. + */ + struct tty_struct *pTty = get_current_tty(); + if (pTty) + { +# if RTLNX_VER_MIN(4,2,0) + const char *pszName = tty_name(pTty); +# else + char szBuf[64]; + const char *pszName = tty_name(pTty, szBuf); +# endif + if ( pszName + && pszName[0] == 't' + && pszName[1] == 't' + && pszName[2] == 'y' + && RT_C_IS_DIGIT(pszName[3]) + && ( pszName[4] == '\0' + || ( RT_C_IS_DIGIT(pszName[4]) + && pszName[5] == '\0' + && (pszName[3] - '0') * 10 + (pszName[4] - '0') <= 63)) ) + fRet = VMMDEV_REQUESTOR_CON_YES; + tty_kref_put(pTty); + } +#endif + + return fRet; +} + + +/** + * Device open. Called on open /dev/vboxdrv + * + * @param pInode Pointer to inode info structure. + * @param pFilp Associated file pointer. + */ +static int vgdrvLinuxOpen(struct inode *pInode, struct file *pFilp) +{ + int rc; + PVBOXGUESTSESSION pSession; + uint32_t fRequestor; + Log((DEVICE_NAME ": pFilp=%p pid=%d/%d %s\n", pFilp, RTProcSelf(), current->pid, current->comm)); + + /* + * Figure out the requestor flags. + * ASSUMES that the gid of /dev/vboxuser is what we should consider the special vbox group. + */ + fRequestor = VMMDEV_REQUESTOR_USERMODE | VMMDEV_REQUESTOR_TRUST_NOT_GIVEN; + if (vgdrvLinuxGetUid() == 0) + fRequestor |= VMMDEV_REQUESTOR_USR_ROOT; + else + fRequestor |= VMMDEV_REQUESTOR_USR_USER; + if (MINOR(pInode->i_rdev) == g_MiscDeviceUser.minor) + { + fRequestor |= VMMDEV_REQUESTOR_USER_DEVICE; + if (!vgdrvLinuxIsGroupZero(pInode->i_gid) && vgdrvLinuxIsInGroupEff(pInode->i_gid)) + fRequestor |= VMMDEV_REQUESTOR_GRP_VBOX; + } + fRequestor |= vgdrvLinuxRequestorOnConsole(); + + /* + * Call common code to create the user session. Associate it with + * the file so we can access it in the other methods. + */ + rc = VGDrvCommonCreateUserSession(&g_DevExt, fRequestor, &pSession); + if (RT_SUCCESS(rc)) + pFilp->private_data = pSession; + + Log(("vgdrvLinuxOpen: g_DevExt=%p pSession=%p rc=%d/%d (pid=%d/%d %s)\n", + &g_DevExt, pSession, rc, vgdrvLinuxConvertToNegErrno(rc), RTProcSelf(), current->pid, current->comm)); + return vgdrvLinuxConvertToNegErrno(rc); +} + + +/** + * Close device. + * + * @param pInode Pointer to inode info structure. + * @param pFilp Associated file pointer. + */ +static int vgdrvLinuxRelease(struct inode *pInode, struct file *pFilp) +{ + Log(("vgdrvLinuxRelease: pFilp=%p pSession=%p pid=%d/%d %s\n", + pFilp, pFilp->private_data, RTProcSelf(), current->pid, current->comm)); + +#if RTLNX_VER_MAX(2,6,28) + /* This housekeeping was needed in older kernel versions to ensure that + * the file pointer didn't get left on the polling queue. */ + vgdrvLinuxFAsync(-1, pFilp, 0); +#endif + VGDrvCommonCloseSession(&g_DevExt, (PVBOXGUESTSESSION)pFilp->private_data); + pFilp->private_data = NULL; + return 0; +} + + +/** + * Device I/O Control entry point. + * + * @param pFilp Associated file pointer. + * @param uCmd The function specified to ioctl(). + * @param ulArg The argument specified to ioctl(). + */ +#if defined(HAVE_UNLOCKED_IOCTL) || defined(DOXYGEN_RUNNING) +static long vgdrvLinuxIOCtl(struct file *pFilp, unsigned int uCmd, unsigned long ulArg) +#else +static int vgdrvLinuxIOCtl(struct inode *pInode, struct file *pFilp, unsigned int uCmd, unsigned long ulArg) +#endif +{ + PVBOXGUESTSESSION pSession = (PVBOXGUESTSESSION)pFilp->private_data; + int rc; +#ifndef HAVE_UNLOCKED_IOCTL + unlock_kernel(); +#endif + +#if 0 /* no fast I/O controls defined atm. */ + if (RT_LIKELY( ( uCmd == SUP_IOCTL_FAST_DO_RAW_RUN + || uCmd == SUP_IOCTL_FAST_DO_HM_RUN + || uCmd == SUP_IOCTL_FAST_DO_NOP) + && pSession->fUnrestricted == true)) + rc = VGDrvCommonIoCtlFast(uCmd, ulArg, &g_DevExt, pSession); + else +#endif + rc = vgdrvLinuxIOCtlSlow(pFilp, uCmd, ulArg, pSession); + +#ifndef HAVE_UNLOCKED_IOCTL + lock_kernel(); +#endif + return rc; +} + + +/** + * Device I/O Control entry point, slow variant. + * + * @param pFilp Associated file pointer. + * @param uCmd The function specified to ioctl(). + * @param ulArg The argument specified to ioctl(). + * @param pSession The session instance. + */ +static int vgdrvLinuxIOCtlSlow(struct file *pFilp, unsigned int uCmd, unsigned long ulArg, PVBOXGUESTSESSION pSession) +{ + int rc; + VBGLREQHDR Hdr; + PVBGLREQHDR pHdr; + uint32_t cbBuf; + + Log6(("vgdrvLinuxIOCtlSlow: pFilp=%p uCmd=%#x ulArg=%p pid=%d/%d\n", pFilp, uCmd, (void *)ulArg, RTProcSelf(), current->pid)); + + /* + * Read the header. + */ + if (RT_FAILURE(RTR0MemUserCopyFrom(&Hdr, ulArg, sizeof(Hdr)))) + { + Log(("vgdrvLinuxIOCtlSlow: copy_from_user(,%#lx,) failed; uCmd=%#x\n", ulArg, uCmd)); + return -EFAULT; + } + if (RT_UNLIKELY(Hdr.uVersion != VBGLREQHDR_VERSION)) + { + Log(("vgdrvLinuxIOCtlSlow: bad header version %#x; uCmd=%#x\n", Hdr.uVersion, uCmd)); + return -EINVAL; + } + + /* + * Buffer the request. + * Note! The header is revalidated by the common code. + */ + cbBuf = RT_MAX(Hdr.cbIn, Hdr.cbOut); + if (RT_UNLIKELY(cbBuf > _1M*16)) + { + Log(("vgdrvLinuxIOCtlSlow: too big cbBuf=%#x; uCmd=%#x\n", cbBuf, uCmd)); + return -E2BIG; + } + if (RT_UNLIKELY( Hdr.cbIn < sizeof(Hdr) + || (cbBuf != _IOC_SIZE(uCmd) && _IOC_SIZE(uCmd) != 0))) + { + Log(("vgdrvLinuxIOCtlSlow: bad ioctl cbBuf=%#x _IOC_SIZE=%#x; uCmd=%#x\n", cbBuf, _IOC_SIZE(uCmd), uCmd)); + return -EINVAL; + } + pHdr = RTMemAlloc(cbBuf); + if (RT_UNLIKELY(!pHdr)) + { + LogRel(("vgdrvLinuxIOCtlSlow: failed to allocate buffer of %d bytes for uCmd=%#x\n", cbBuf, uCmd)); + return -ENOMEM; + } + if (RT_FAILURE(RTR0MemUserCopyFrom(pHdr, ulArg, Hdr.cbIn))) + { + Log(("vgdrvLinuxIOCtlSlow: copy_from_user(,%#lx, %#x) failed; uCmd=%#x\n", ulArg, Hdr.cbIn, uCmd)); + RTMemFree(pHdr); + return -EFAULT; + } + if (Hdr.cbIn < cbBuf) + RT_BZERO((uint8_t *)pHdr + Hdr.cbIn, cbBuf - Hdr.cbIn); + + /* + * Process the IOCtl. + */ + rc = VGDrvCommonIoCtl(uCmd, &g_DevExt, pSession, pHdr, cbBuf); + + /* + * Copy ioctl data and output buffer back to user space. + */ + if (RT_SUCCESS(rc)) + { + uint32_t cbOut = pHdr->cbOut; + if (RT_UNLIKELY(cbOut > cbBuf)) + { + LogRel(("vgdrvLinuxIOCtlSlow: too much output! %#x > %#x; uCmd=%#x!\n", cbOut, cbBuf, uCmd)); + cbOut = cbBuf; + } + if (RT_FAILURE(RTR0MemUserCopyTo(ulArg, pHdr, cbOut))) + { + /* this is really bad! */ + LogRel(("vgdrvLinuxIOCtlSlow: copy_to_user(%#lx,,%#x); uCmd=%#x!\n", ulArg, cbOut, uCmd)); + rc = -EFAULT; + } + } + else + { + Log(("vgdrvLinuxIOCtlSlow: pFilp=%p uCmd=%#x ulArg=%p failed, rc=%d\n", pFilp, uCmd, (void *)ulArg, rc)); + rc = -EINVAL; + } + RTMemFree(pHdr); + + Log6(("vgdrvLinuxIOCtlSlow: returns %d (pid=%d/%d)\n", rc, RTProcSelf(), current->pid)); + return rc; +} + + +/** + * @note This code is duplicated on other platforms with variations, so please + * keep them all up to date when making changes! + */ +int VBOXCALL VBoxGuestIDC(void *pvSession, uintptr_t uReq, PVBGLREQHDR pReqHdr, size_t cbReq) +{ + /* + * Simple request validation (common code does the rest). + */ + int rc; + if ( RT_VALID_PTR(pReqHdr) + && cbReq >= sizeof(*pReqHdr)) + { + /* + * All requests except the connect one requires a valid session. + */ + PVBOXGUESTSESSION pSession = (PVBOXGUESTSESSION)pvSession; + if (pSession) + { + if ( RT_VALID_PTR(pSession) + && pSession->pDevExt == &g_DevExt) + rc = VGDrvCommonIoCtl(uReq, &g_DevExt, pSession, pReqHdr, cbReq); + else + rc = VERR_INVALID_HANDLE; + } + else if (uReq == VBGL_IOCTL_IDC_CONNECT) + { + rc = VGDrvCommonCreateKernelSession(&g_DevExt, &pSession); + if (RT_SUCCESS(rc)) + { + rc = VGDrvCommonIoCtl(uReq, &g_DevExt, pSession, pReqHdr, cbReq); + if (RT_FAILURE(rc)) + VGDrvCommonCloseSession(&g_DevExt, pSession); + } + } + else + rc = VERR_INVALID_HANDLE; + } + else + rc = VERR_INVALID_POINTER; + return rc; +} +EXPORT_SYMBOL(VBoxGuestIDC); + + +/** + * Asynchronous notification activation method. + * + * @returns 0 on success, negative errno on failure. + * + * @param fd The file descriptor. + * @param pFile The file structure. + * @param fOn On/off indicator. + */ +static int vgdrvLinuxFAsync(int fd, struct file *pFile, int fOn) +{ + return fasync_helper(fd, pFile, fOn, &g_pFAsyncQueue); +} + + +/** + * Poll function. + * + * This returns ready to read if the mouse pointer mode or the pointer position + * has changed since last call to read. + * + * @returns 0 if no changes, POLLIN | POLLRDNORM if there are unseen changes. + * + * @param pFile The file structure. + * @param pPt The poll table. + * + * @remarks This is probably not really used, X11 is said to use the fasync + * interface instead. + */ +static unsigned int vgdrvLinuxPoll(struct file *pFile, poll_table *pPt) +{ + PVBOXGUESTSESSION pSession = (PVBOXGUESTSESSION)pFile->private_data; + uint32_t u32CurSeq = ASMAtomicUoReadU32(&g_DevExt.u32MousePosChangedSeq); + unsigned int fMask = pSession->u32MousePosChangedSeq != u32CurSeq + ? POLLIN | POLLRDNORM + : 0; + poll_wait(pFile, &g_PollEventQueue, pPt); + return fMask; +} + + +/** + * Read to go with our poll/fasync response. + * + * @returns 1 or -EINVAL. + * + * @param pFile The file structure. + * @param pbBuf The buffer to read into. + * @param cbRead The max number of bytes to read. + * @param poff The current file position. + * + * @remarks This is probably not really used as X11 lets the driver do its own + * event reading. The poll condition is therefore also cleared when we + * see VMMDevReq_GetMouseStatus in vgdrvIoCtl_VMMRequest. + */ +static ssize_t vgdrvLinuxRead(struct file *pFile, char *pbBuf, size_t cbRead, loff_t *poff) +{ + PVBOXGUESTSESSION pSession = (PVBOXGUESTSESSION)pFile->private_data; + uint32_t u32CurSeq = ASMAtomicUoReadU32(&g_DevExt.u32MousePosChangedSeq); + + if (*poff != 0) + return -EINVAL; + + /* + * Fake a single byte read if we're not up to date with the current mouse position. + */ + if ( pSession->u32MousePosChangedSeq != u32CurSeq + && cbRead > 0) + { + pSession->u32MousePosChangedSeq = u32CurSeq; + pbBuf[0] = 0; + return 1; + } + return 0; +} + + +void VGDrvNativeISRMousePollEvent(PVBOXGUESTDEVEXT pDevExt) +{ +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + int rc; +#endif + NOREF(pDevExt); + + /* + * Wake up everyone that's in a poll() and post anyone that has + * subscribed to async notifications. + */ + Log3(("VGDrvNativeISRMousePollEvent: wake_up_all\n")); + wake_up_all(&g_PollEventQueue); + Log3(("VGDrvNativeISRMousePollEvent: kill_fasync\n")); + kill_fasync(&g_pFAsyncQueue, SIGIO, POLL_IN); +#ifdef VBOXGUEST_WITH_INPUT_DRIVER + /* Report events to the kernel input device */ + g_pMouseStatusReq->mouseFeatures = 0; + g_pMouseStatusReq->pointerXPos = 0; + g_pMouseStatusReq->pointerYPos = 0; + rc = VbglR0GRPerform(&g_pMouseStatusReq->header); + if (RT_SUCCESS(rc)) + { + input_report_abs(g_pInputDevice, ABS_X, + g_pMouseStatusReq->pointerXPos); + input_report_abs(g_pInputDevice, ABS_Y, + g_pMouseStatusReq->pointerYPos); +# ifdef EV_SYN + input_sync(g_pInputDevice); +# endif + } +#endif + Log3(("VGDrvNativeISRMousePollEvent: done\n")); +} + + +bool VGDrvNativeProcessOption(PVBOXGUESTDEVEXT pDevExt, const char *pszName, const char *pszValue) +{ + RT_NOREF(pDevExt); RT_NOREF(pszName); RT_NOREF(pszValue); + return false; +} + + +#if RTLNX_VER_MIN(2,6,0) + +/** log and dbg_log parameter setter. */ +static int vgdrvLinuxParamLogGrpSet(const char *pszValue, CONST_4_15 struct kernel_param *pParam) +{ + if (g_fLoggerCreated) + { + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + if (pLogger) + RTLogGroupSettings(pLogger, pszValue); + } + else if (pParam->name[0] != 'd') + strlcpy(&g_szLogGrp[0], pszValue, sizeof(g_szLogGrp)); + + return 0; +} + +/** log and dbg_log parameter getter. */ +static int vgdrvLinuxParamLogGrpGet(char *pszBuf, CONST_4_15 struct kernel_param *pParam) +{ + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + *pszBuf = '\0'; + if (pLogger) + RTLogGetGroupSettings(pLogger, pszBuf, _4K); + return strlen(pszBuf); +} + + +/** log and dbg_log_flags parameter setter. */ +static int vgdrvLinuxParamLogFlagsSet(const char *pszValue, CONST_4_15 struct kernel_param *pParam) +{ + if (g_fLoggerCreated) + { + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + if (pLogger) + RTLogFlags(pLogger, pszValue); + } + else if (pParam->name[0] != 'd') + strlcpy(&g_szLogFlags[0], pszValue, sizeof(g_szLogFlags)); + return 0; +} + +/** log and dbg_log_flags parameter getter. */ +static int vgdrvLinuxParamLogFlagsGet(char *pszBuf, CONST_4_15 struct kernel_param *pParam) +{ + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + *pszBuf = '\0'; + if (pLogger) + RTLogGetFlags(pLogger, pszBuf, _4K); + return strlen(pszBuf); +} + + +/** log and dbg_log_dest parameter setter. */ +static int vgdrvLinuxParamLogDstSet(const char *pszValue, CONST_4_15 struct kernel_param *pParam) +{ + if (g_fLoggerCreated) + { + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + if (pLogger) + RTLogDestinations(pLogger, pszValue); + } + else if (pParam->name[0] != 'd') + strlcpy(&g_szLogDst[0], pszValue, sizeof(g_szLogDst)); + return 0; +} + +/** log and dbg_log_dest parameter getter. */ +static int vgdrvLinuxParamLogDstGet(char *pszBuf, CONST_4_15 struct kernel_param *pParam) +{ + PRTLOGGER pLogger = pParam->name[0] == 'd' ? RTLogDefaultInstance() : RTLogRelGetDefaultInstance(); + *pszBuf = '\0'; + if (pLogger) + RTLogGetDestinations(pLogger, pszBuf, _4K); + return strlen(pszBuf); +} + + +/** r3_log_to_host parameter setter. */ +static int vgdrvLinuxParamR3LogToHostSet(const char *pszValue, CONST_4_15 struct kernel_param *pParam) +{ + g_DevExt.fLoggingEnabled = VBDrvCommonIsOptionValueTrue(pszValue); + return 0; +} + +/** r3_log_to_host parameter getter. */ +static int vgdrvLinuxParamR3LogToHostGet(char *pszBuf, CONST_4_15 struct kernel_param *pParam) +{ + strcpy(pszBuf, g_DevExt.fLoggingEnabled ? "enabled" : "disabled"); + return strlen(pszBuf); +} + + +/* + * Define module parameters. + */ +module_param_call(log, vgdrvLinuxParamLogGrpSet, vgdrvLinuxParamLogGrpGet, NULL, 0664); +module_param_call(log_flags, vgdrvLinuxParamLogFlagsSet, vgdrvLinuxParamLogFlagsGet, NULL, 0664); +module_param_call(log_dest, vgdrvLinuxParamLogDstSet, vgdrvLinuxParamLogDstGet, NULL, 0664); +# ifdef LOG_ENABLED +module_param_call(dbg_log, vgdrvLinuxParamLogGrpSet, vgdrvLinuxParamLogGrpGet, NULL, 0664); +module_param_call(dbg_log_flags, vgdrvLinuxParamLogFlagsSet, vgdrvLinuxParamLogFlagsGet, NULL, 0664); +module_param_call(dbg_log_dest, vgdrvLinuxParamLogDstSet, vgdrvLinuxParamLogDstGet, NULL, 0664); +# endif +module_param_call(r3_log_to_host, vgdrvLinuxParamR3LogToHostSet, vgdrvLinuxParamR3LogToHostGet, NULL, 0664); + +#endif /* 2.6.0 and later */ + + +module_init(vgdrvLinuxModInit); +module_exit(vgdrvLinuxModExit); + +MODULE_AUTHOR(VBOX_VENDOR); +MODULE_DESCRIPTION(VBOX_PRODUCT " Guest Additions for Linux Module"); +MODULE_LICENSE("GPL"); +#ifdef MODULE_VERSION +MODULE_VERSION(VBOX_VERSION_STRING " r" RT_XSTR(VBOX_SVN_REV)); +#endif + |