summaryrefslogtreecommitdiffstats
path: root/include/VBox/err.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/VBox/err.h')
-rw-r--r--include/VBox/err.h2975
1 files changed, 2975 insertions, 0 deletions
diff --git a/include/VBox/err.h b/include/VBox/err.h
new file mode 100644
index 00000000..f39610e8
--- /dev/null
+++ b/include/VBox/err.h
@@ -0,0 +1,2975 @@
+/** @file
+ * VirtualBox Status Codes.
+ */
+
+/*
+ * Copyright (C) 2006-2020 Oracle Corporation
+ *
+ * This file is part of VirtualBox Open Source Edition (OSE), as
+ * available from http://www.virtualbox.org. This file is free software;
+ * you can redistribute it and/or modify it under the terms of the GNU
+ * General Public License (GPL) as published by the Free Software
+ * Foundation, in version 2 as it comes in the "COPYING" file of the
+ * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
+ * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
+ *
+ * The contents of this file may alternatively be used under the terms
+ * of the Common Development and Distribution License Version 1.0
+ * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
+ * VirtualBox OSE distribution, in which case the provisions of the
+ * CDDL are applicable instead of those of the GPL.
+ *
+ * You may elect to license modified versions of this file under the
+ * terms and conditions of either the GPL or the CDDL or both.
+ */
+
+#ifndef VBOX_INCLUDED_err_h
+#define VBOX_INCLUDED_err_h
+#ifndef RT_WITHOUT_PRAGMA_ONCE
+# pragma once
+#endif
+
+#include <VBox/cdefs.h>
+#include <iprt/err.h>
+
+
+/** @defgroup grp_err VBox Error Codes
+ * @{
+ */
+
+/* SED-START */
+
+/** @name Misc. Status Codes
+ * @{
+ */
+/** Failed to allocate VM memory. */
+#define VERR_NO_VM_MEMORY (-1000)
+/** RC is toasted and the VMM should be terminated at once, but no need to
+ * panic about it :-) */
+#define VERR_DONT_PANIC (-1001)
+/** Unsupported CPU. */
+#define VERR_UNSUPPORTED_CPU (-1002)
+/** Unsupported CPU mode. */
+#define VERR_UNSUPPORTED_CPU_MODE (-1003)
+/** Page not present. */
+#define VERR_PAGE_NOT_PRESENT (-1004)
+/** Invalid/Corrupted configuration file. */
+#define VERR_CFG_INVALID_FORMAT (-1005)
+/** No configuration value exists. */
+#define VERR_CFG_NO_VALUE (-1006)
+/** Selector not present. */
+#define VERR_SELECTOR_NOT_PRESENT (-1007)
+/** Not code selector. */
+#define VERR_NOT_CODE_SELECTOR (-1008)
+/** Not data selector. */
+#define VERR_NOT_DATA_SELECTOR (-1009)
+/** Out of selector bounds. */
+#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
+/** Invalid selector. Usually beyond table limits. */
+#define VERR_INVALID_SELECTOR (-1011)
+/** Invalid requested privilege level. */
+#define VERR_INVALID_RPL (-1012)
+/** PML4 entry not present. */
+#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
+/** Page directory pointer not present. */
+#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
+/** Raw mode doesn't support SMP. */
+#define VERR_RAW_MODE_INVALID_SMP (-1015)
+/** Invalid VM handle. */
+#define VERR_INVALID_VM_HANDLE (-1016)
+/** Invalid VM handle. */
+#define VERR_INVALID_VMCPU_HANDLE (-1017)
+/** Invalid Virtual CPU ID. */
+#define VERR_INVALID_CPU_ID (-1018)
+/** Too many VCPUs. */
+#define VERR_TOO_MANY_CPUS (-1019)
+/** The service was disabled on the host.
+ * Returned by pfnInit in VBoxService to indicated a non-fatal error that
+ * should results in the particular service being disabled. */
+#define VERR_SERVICE_DISABLED (-1020)
+/** The requested feature is not supported in raw-mode. */
+#define VERR_NOT_SUP_IN_RAW_MODE (-1021)
+/** Invalid CPU index. */
+#define VERR_INVALID_CPU_INDEX (-1022)
+/** This VirtualBox build does not support raw-mode. */
+#define VERR_RAW_MODE_NOT_SUPPORTED (-1023)
+/** Essential fields in the shared VM structure doesn't match the global one. */
+#define VERR_INCONSISTENT_VM_HANDLE (-1024)
+/** The VM has been restored. */
+#define VERR_VM_RESTORED (-1025)
+/** The requested feature is not supported by NEM. */
+#define VERR_NOT_SUP_BY_NEM (-1026)
+/** @} */
+
+
+/** @name Execution Monitor/Manager (EM) Status Codes
+ *
+ * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
+ * are of vital importance. The lower the number the higher importance
+ * as a scheduling instruction.
+ * @{
+ */
+/** First scheduling related status code. */
+#define VINF_EM_FIRST 1100
+/** Indicating that the VM is being terminated and that the execution
+ * shall stop. */
+#define VINF_EM_TERMINATE 1100
+/** Hypervisor code was stepped.
+ * EM will first send this to the debugger, and if the issue isn't
+ * resolved there it will enter guru meditation. */
+#define VINF_EM_DBG_HYPER_STEPPED 1101
+/** Hit a breakpoint in the hypervisor code,
+ * EM will first send this to the debugger, and if the issue isn't
+ * resolved there it will enter guru meditation. */
+#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
+/** Hit a possible assertion in the hypervisor code,
+ * EM will first send this to the debugger, and if the issue isn't
+ * resolved there it will enter guru meditation. */
+#define VINF_EM_DBG_HYPER_ASSERTION 1103
+/** Generic debug event, suspend the VM for debugging. */
+#define VINF_EM_DBG_EVENT 1104
+/** Indicating that the VM should be suspended for debugging because
+ * the developer wants to inspect the VM state. */
+#define VINF_EM_DBG_STOP 1105
+/** Indicating success single stepping and that EM should report that
+ * event to the debugger. */
+#define VINF_EM_DBG_STEPPED 1106
+/** Indicating that a breakpoint was hit and that EM should notify the debugger
+ * and in the event there is no debugger fail fatally. */
+#define VINF_EM_DBG_BREAKPOINT 1107
+/** Indicating that EM should single step an instruction.
+ * The instruction is stepped in the current execution mode (RAW/REM). */
+#define VINF_EM_DBG_STEP 1108
+/** Indicating that the VM is being turned off and that the EM should
+ * exit to the VM awaiting the destruction request. */
+#define VINF_EM_OFF 1109
+/** Indicating that the VM has been suspended and that the thread
+ * should wait for request telling it what to do next. */
+#define VINF_EM_SUSPEND 1110
+/** Indicating that the VM has been reset and that scheduling goes
+ * back to startup defaults. */
+#define VINF_EM_RESET 1111
+/** Indicating that the VM has executed a halt instruction and that
+ * the emulation thread should wait for an interrupt before resuming
+ * execution. */
+#define VINF_EM_HALT 1112
+/** Indicating that the VM has been resumed and that the thread should
+ * start executing. */
+#define VINF_EM_RESUME 1113
+/** Indicating that we've got an out-of-memory condition and that we need
+ * to take the appropriate actions to deal with this.
+ * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
+ * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
+ * vital to correctly operating the VM. Also, they can't normally occur together
+ * with an out-of-memory condition, and even if that should happen the condition
+ * will be rediscovered before executing any more code. */
+#define VINF_EM_NO_MEMORY 1114
+/** The fatal variant of VINF_EM_NO_MEMORY. */
+#define VERR_EM_NO_MEMORY (-1114)
+/** Indicating that a rescheduling to recompiled execution.
+ * Typically caused by raw-mode executing code which is difficult/slow
+ * to virtualize rawly.
+ * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
+#define VINF_EM_RESCHEDULE_REM 1115
+/** Indicating that a rescheduling to vmx-mode execution (HM/NEM).
+ * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
+#define VINF_EM_RESCHEDULE_HM 1116
+/** Indicating that a rescheduling to raw-mode execution.
+ * Typically caused by REM detecting that raw-mode execution is possible.
+ * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
+#define VINF_EM_RESCHEDULE_RAW 1117
+/** Indicating that a rescheduling now is required. Typically caused by
+ * interrupts having changed the EIP. */
+#define VINF_EM_RESCHEDULE 1118
+/** PARAV call */
+#define VINF_EM_RESCHEDULE_PARAV 1119
+/** Go back into wait for SIPI mode */
+#define VINF_EM_WAIT_SIPI 1120
+/** Last scheduling related status code. (inclusive) */
+#define VINF_EM_LAST 1120
+
+/** Reason for leaving RC: Guest trap which couldn't be handled in RC.
+ * The trap is generally forwarded to the REM and executed there. */
+#define VINF_EM_RAW_GUEST_TRAP 1121
+/** Reason for leaving RC: Interrupted by external interrupt.
+ * The interrupt needed to be handled by the host OS. */
+#define VINF_EM_RAW_INTERRUPT 1122
+/** Reason for leaving RC: Interrupted by external interrupt while in hypervisor
+ * code. The interrupt needed to be handled by the host OS and hypervisor
+ * execution must be resumed. VM state is not complete at this point. */
+#define VINF_EM_RAW_INTERRUPT_HYPER 1123
+/** Reason for leaving RC: A Ring switch was attempted.
+ * Normal cause of action is to execute this in REM. */
+#define VINF_EM_RAW_RING_SWITCH 1124
+/** Reason for leaving RC: A Ring switch was attempted using software interrupt.
+ * Normal cause of action is to execute this in REM. */
+#define VINF_EM_RAW_RING_SWITCH_INT 1125
+/** Reason for leaving RC: A privileged instruction was attempted executed.
+ * Normal cause of action is to execute this in REM. */
+#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
+
+/** Reason for leaving RZ: Emulate instruction. */
+#define VINF_EM_RAW_EMULATE_INSTR 1127
+/** Reason for leaving RC: Unhandled TSS write.
+ * Recompiler gets control. */
+#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
+/** Reason for leaving RC: Unhandled LDT write.
+ * Recompiler gets control. */
+#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
+/** Reason for leaving RC: Unhandled IDT write.
+ * Recompiler gets control. */
+#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
+/** Reason for leaving RC: Partly handled GDT write.
+ * Recompiler gets control. */
+#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
+/** Reason for leaving RC: jump inside generated patch jump.
+ * Fatal error. */
+#define VERR_EM_RAW_PATCH_CONFLICT (-1133)
+/** Reason for leaving RZ: Ring-3 operation pending. */
+#define VINF_EM_RAW_TO_R3 1135
+/** Reason for leaving RZ: Timer pending. */
+#define VINF_EM_RAW_TIMER_PENDING 1136
+/** Reason for leaving RC: Interrupt pending (guest). */
+#define VINF_EM_RAW_INTERRUPT_PENDING 1137
+/** Reason for leaving RC: Encountered a stale selector. */
+#define VINF_EM_RAW_STALE_SELECTOR 1138
+/** Reason for leaving RC: The IRET resuming guest code trapped. */
+#define VINF_EM_RAW_IRET_TRAP 1139
+/** The interpreter was unable to deal with the instruction at hand. */
+#define VERR_EM_INTERPRETER (-1148)
+/** Internal EM error caused by an unknown warning or informational status code. */
+#define VERR_EM_INTERNAL_ERROR (-1149)
+/** Pending VM request packet. */
+#define VINF_EM_PENDING_REQUEST 1150
+/** Start instruction stepping (debug only). */
+#define VINF_EM_RAW_EMULATE_DBG_STEP 1151
+/** Patch TPR access instruction. */
+#define VINF_EM_HM_PATCH_TPR_INSTR 1152
+/** Unexpected guest mapping conflict detected. */
+#define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154)
+/** Reason for leaving RC: A triple-fault condition. Currently, causes
+ * a guru meditation. */
+#define VINF_EM_TRIPLE_FAULT 1155
+/** The specified execution engine cannot execute guest code in the current
+ * state. */
+#define VERR_EM_CANNOT_EXEC_GUEST (-1156)
+/** Reason for leaving RC: Inject a TRPM event. */
+#define VINF_EM_RAW_INJECT_TRPM_EVENT 1157
+/** Guest tried to trigger a CPU hang. The guest is probably up to no good. */
+#define VERR_EM_GUEST_CPU_HANG (-1158)
+/** Reason for leaving RZ: Pending ring-3 IN instruction. */
+#define VINF_EM_PENDING_R3_IOPORT_READ 1159
+/** Reason for leaving RZ: Pending ring-3 OUT instruction. */
+#define VINF_EM_PENDING_R3_IOPORT_WRITE 1160
+/** Trick for resuming EMHistoryExec after a VMCPU_FF_IOM is handled. */
+#define VINF_EM_RESUME_R3_HISTORY_EXEC 1161
+/** @} */
+
+
+/** @name Debugging Facility (DBGF) DBGF Status Codes
+ * @{
+ */
+/** The function called requires the caller to be attached as a
+ * debugger to the VM. */
+#define VERR_DBGF_NOT_ATTACHED (-1200)
+/** Someone (including the caller) was already attached as
+ * debugger to the VM. */
+#define VERR_DBGF_ALREADY_ATTACHED (-1201)
+/** Tried to halt a debugger which was already halted.
+ * (This is a warning and not an error.) */
+#define VWRN_DBGF_ALREADY_HALTED 1202
+/** The DBGF has no more free breakpoint slots. */
+#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
+/** The DBGF couldn't find the specified breakpoint. */
+#define VERR_DBGF_BP_NOT_FOUND (-1204)
+/** Attempted to enabled a breakpoint which was already enabled. */
+#define VINF_DBGF_BP_ALREADY_ENABLED 1205
+/** Attempted to disabled a breakpoint which was already disabled. */
+#define VINF_DBGF_BP_ALREADY_DISABLED 1206
+/** The breakpoint already exists. */
+#define VINF_DBGF_BP_ALREADY_EXIST 1207
+/** The byte string was not found. */
+#define VERR_DBGF_MEM_NOT_FOUND (-1208)
+/** The OS was not detected. */
+#define VERR_DBGF_OS_NOT_DETCTED (-1209)
+/** The OS was not detected. */
+#define VINF_DBGF_OS_NOT_DETCTED 1209
+/** The specified register was not found. */
+#define VERR_DBGF_REGISTER_NOT_FOUND (-1210)
+/** The value was truncated to fit.
+ * For queries this means that the register is wider than the queried value.
+ * For setters this means that the value is wider than the register. */
+#define VINF_DBGF_TRUNCATED_REGISTER 1211
+/** The value was zero extended to fit.
+ * For queries this means that the register is narrower than the queried value.
+ * For setters this means that the value is narrower than the register. */
+#define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212
+/** The requested type conversion was not supported. */
+#define VERR_DBGF_UNSUPPORTED_CAST (-1213)
+/** The register is read-only and cannot be modified. */
+#define VERR_DBGF_READ_ONLY_REGISTER (-1214)
+/** Internal processing error \#1 in the DBGF register code. */
+#define VERR_DBGF_REG_IPE_1 (-1215)
+/** Internal processing error \#2 in the DBGF register code. */
+#define VERR_DBGF_REG_IPE_2 (-1216)
+/** Unhandled \#DB in hypervisor code. */
+#define VERR_DBGF_HYPER_DB_XCPT (-1217)
+/** Internal processing error \#1 in the DBGF stack code. */
+#define VERR_DBGF_STACK_IPE_1 (-1218)
+/** Internal processing error \#2 in the DBGF stack code. */
+#define VERR_DBGF_STACK_IPE_2 (-1219)
+/** No trace buffer available, please change the VM config. */
+#define VERR_DBGF_NO_TRACE_BUFFER (-1220)
+/** @} */
+
+
+/** @name Patch Manager (PATM) Status Codes
+ * @{
+ */
+/** Non fatal Patch Manager analysis phase warning */
+#define VWRN_CONTINUE_ANALYSIS 1400
+/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
+#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
+/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
+#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
+/** Patch installation refused (patch too complex or unsupported instructions ) */
+#define VERR_PATCHING_REFUSED (-1401)
+/** Unable to find patch */
+#define VERR_PATCH_NOT_FOUND (-1402)
+/** Patch disabled */
+#define VERR_PATCH_DISABLED (-1403)
+/** Patch enabled */
+#define VWRN_PATCH_ENABLED 1404
+/** Patch was already disabled */
+#define VERR_PATCH_ALREADY_DISABLED (-1405)
+/** Patch was already enabled */
+#define VERR_PATCH_ALREADY_ENABLED (-1406)
+/** Patch was removed. */
+#define VWRN_PATCH_REMOVED 1407
+
+/** Reason for leaving RC: \#GP with EIP pointing to patch code. */
+#define VINF_PATM_PATCH_TRAP_GP 1408
+/** First leave RC code. */
+#define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP
+/** Reason for leaving RC: \#PF with EIP pointing to patch code. */
+#define VINF_PATM_PATCH_TRAP_PF 1409
+/** Reason for leaving RC: int3 with EIP pointing to patch code. */
+#define VINF_PATM_PATCH_INT3 1410
+/** Reason for leaving RC: \#PF for monitored patch page. */
+#define VINF_PATM_CHECK_PATCH_PAGE 1411
+/** Reason for leaving RC: duplicate instruction called at current eip. */
+#define VINF_PATM_DUPLICATE_FUNCTION 1412
+/** Execute one instruction with the recompiler */
+#define VINF_PATCH_EMULATE_INSTR 1413
+/** Reason for leaving RC: attempt to patch MMIO write. */
+#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
+/** Reason for leaving RC: attempt to patch MMIO read. */
+#define VINF_PATM_HC_MMIO_PATCH_READ 1415
+/** Reason for leaving RC: pending irq after iret that sets IF. */
+#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
+/** Last leave RC code. */
+#define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
+
+/** No conflicts to resolve */
+#define VERR_PATCH_NO_CONFLICT (-1425)
+/** Detected unsafe code for patching */
+#define VERR_PATM_UNSAFE_CODE (-1426)
+/** Terminate search branch */
+#define VWRN_PATCH_END_BRANCH 1427
+/** Already patched */
+#define VERR_PATM_ALREADY_PATCHED (-1428)
+/** Spinlock detection failed. */
+#define VINF_PATM_SPINLOCK_FAILED (1429)
+/** Continue execution after patch trap. */
+#define VINF_PATCH_CONTINUE (1430)
+/** The patch manager is not used because we're using HM and VT-x/AMD-V. */
+#define VERR_PATM_HM_IPE (-1431)
+/** Unexpected trap in patch code. */
+#define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432)
+
+/** @} */
+
+
+/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
+ * @{
+ */
+/** Trap not handled */
+#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
+/** Patch installed */
+#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
+/** Page record not found */
+#define VWRN_CSAM_PAGE_NOT_FOUND 1502
+/** Reason for leaving RC: CSAM wants perform a task in ring-3. */
+#define VINF_CSAM_PENDING_ACTION 1503
+/** The CSAM is not used because we're using HM and VT-x/AMD-V. */
+#define VERR_CSAM_HM_IPE (-1504)
+/** @} */
+
+
+/** @name Page Monitor/Manager (PGM) Status Codes
+ * @{
+ */
+/** Attempt to create a GC mapping which conflicts with an existing mapping. */
+#define VERR_PGM_MAPPING_CONFLICT (-1600)
+/** The physical handler range has no corresponding RAM range.
+ * If this is MMIO, see todo above the return. If not MMIO, then it's
+ * someone else's fault... */
+#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
+/** Attempt to register an access handler for a virtual range of which a part
+ * was already handled. */
+#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
+/** Attempt to register an access handler for a physical range of which a part
+ * was already handled. */
+#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
+/** Invalid page directory specified to PGM. */
+#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
+/** Invalid GC physical address. */
+#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
+/** Invalid GC physical range. Usually used when a specified range crosses
+ * a RAM region boundary. */
+#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
+/** Specified access handler was not found. */
+#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
+/** Attempt to register a RAM range of which parts are already
+ * covered by existing RAM ranges. */
+#define VERR_PGM_RAM_CONFLICT (-1608)
+/** Failed to add new mappings because the current mappings are fixed
+ * in guest os memory. */
+#define VERR_PGM_MAPPINGS_FIXED (-1609)
+/** Failed to fix mappings because of a conflict with the intermediate code. */
+#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
+/** Failed to fix mappings because a mapping rejected the address. */
+#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
+/** Failed to fix mappings because the proposed memory area was to small. */
+#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
+/** Reason for leaving RZ: The urge to syncing CR3. */
+#define VINF_PGM_SYNC_CR3 1613
+/** Page not marked for dirty bit tracking */
+#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
+/** Page fault caused by dirty bit tracking; corrected */
+#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
+/** Go ahead with the default Read/Write operation.
+ * This is returned by a R3 physical or virtual handler when it wants the
+ * PGMPhys[Read|Write] routine do the reading/writing. */
+#define VINF_PGM_HANDLER_DO_DEFAULT 1616
+/** The paging mode of the host is not supported yet. */
+#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
+/** The physical guest page is a reserved/MMIO page and does not have any HC
+ * address. */
+#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
+/** No page directory available for the hypervisor. */
+#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
+
+
+/** The returned shadow page is cached. */
+#define VINF_PGM_CACHED_PAGE 1622
+/** Returned by handler registration, modification and deregistration
+ * when the shadow PTs could be updated because the guest page
+ * aliased or/and mapped by multiple PTs. */
+#define VINF_PGM_GCPHYS_ALIASED 1623
+/** Reason for leaving RC: Paging mode changed.
+ * PGMChangeMode() uses this to force a switch to R3 so it can safely deal with
+ * a mode switch. */
+#define VINF_PGM_CHANGE_MODE 1624
+/** SyncPage modified the PDE.
+ * This is an internal status code used to communicate back to the \#PF handler
+ * that the PDE was (probably) marked not-present and it should restart the instruction. */
+#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
+/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
+#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
+/** Conflict between the core memory and the intermediate paging context, try again.
+ * There are some very special conditions applying to the intermediate paging context
+ * (used during the world switches), and some times we continuously run into these
+ * when asking the host kernel for memory during VM init. Let us know if you run into
+ * this and we'll adjust the code so it tries harder to avoid it.
+ */
+#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
+/** The shadow paging mode is not supported yet. */
+#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
+/** The dynamic mapping cache for physical memory failed. */
+#define VERR_PGM_DYNMAP_FAILED (-1629)
+/** The auto usage cache for the dynamic mapping set is full. */
+#define VERR_PGM_DYNMAP_FULL_SET (-1630)
+/** The initialization of the dynamic mapping cache failed. */
+#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
+/** The expanding of the dynamic mapping cache failed. */
+#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
+/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
+#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
+/** Catch any access and route it thru PGM. */
+#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
+/** Catch write access and route it thru PGM. */
+#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
+/** Catch write access and route it thru PGM. */
+#define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635)
+/** No CR3 root shadow page table. */
+#define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636)
+/** Trying to free a page with an invalid Page ID. */
+#define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637)
+/** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */
+#define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638)
+/** Trying to free a page that isn't RAM. */
+#define VERR_PGM_PHYS_NOT_RAM (-1639)
+/** Not ROM page. */
+#define VERR_PGM_PHYS_NOT_ROM (-1640)
+/** Not MMIO page. */
+#define VERR_PGM_PHYS_NOT_MMIO (-1641)
+/** Not MMIO2 page. */
+#define VERR_PGM_PHYS_NOT_MMIO2 (-1642)
+/** Already aliased to a different page. */
+#define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643)
+/** Already aliased to the same page. */
+#define VINF_PGM_HANDLER_ALREADY_ALIASED (1643)
+/** PGM pool flush pending - return to ring 3. */
+#define VINF_PGM_POOL_FLUSH_PENDING (1644)
+/** Unable to use the range for a large page. */
+#define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645)
+/** Don't mess around with ballooned pages. */
+#define VERR_PGM_PHYS_PAGE_BALLOONED (-1646)
+/** Internal processing error \#1 in page access handler code. */
+#define VERR_PGM_HANDLER_IPE_1 (-1647)
+
+
+/** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */
+#define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651)
+/** Guest mappings are disabled. */
+#define VERR_PGM_MAPPINGS_DISABLED (-1652)
+/** No guest mappings when SMP is enabled. */
+#define VERR_PGM_MAPPINGS_SMP (-1653)
+/** Invalid saved page state. */
+#define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654)
+/** Encountered an unexpected page type in the saved state. */
+#define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655)
+/** Encountered an unexpected page state in the saved state. */
+#define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656)
+/** Couldn't find MMIO2 range from saved state. */
+#define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657)
+/** Couldn't find MMIO2 page from saved state. */
+#define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658)
+/** Couldn't find ROM range from saved state. */
+#define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659)
+/** Couldn't find ROM page from saved state. */
+#define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660)
+/** ROM page mismatch between saved state and the VM. */
+#define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661)
+/** Unknown saved state record. */
+#define VERR_PGM_SAVED_REC_TYPE (-1662)
+/** Internal processing error in the PGM dynmap (r0/rc). */
+#define VERR_PGM_DYNMAP_IPE (-1663)
+/** Internal processing error in the PGM handy page allocator. */
+#define VERR_PGM_HANDY_PAGE_IPE (-1664)
+/** Failed to map the guest PML4. */
+#define VERR_PGM_PML4_MAPPING (-1665)
+/** Failed to obtain a pool page. */
+#define VERR_PGM_POOL_GET_PAGE_FAILED (-1666)
+/** A PGM function was called in a mode where it isn't supposed to be used. */
+#define VERR_PGM_NOT_USED_IN_MODE (-1667)
+/** The CR3 address specified memory we don't know about. */
+#define VERR_PGM_INVALID_CR3_ADDR (-1668)
+/** One or the PDPEs specified memory we don't know about. */
+#define VERR_PGM_INVALID_PDPE_ADDR (-1669)
+/** Internal processing error in the PGM physical handler code. */
+#define VERR_PGM_PHYS_HANDLER_IPE (-1670)
+/** Internal processing error \#1 in the PGM physial page mapping code. */
+#define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671)
+/** Internal processing error \#2 in the PGM physial page mapping code. */
+#define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672)
+/** Internal processing error \#3 in the PGM physial page mapping code. */
+#define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673)
+/** Internal processing error \#4 in the PGM physial page mapping code. */
+#define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674)
+/** Too many loops looking for a page to reuse. */
+#define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675)
+/** Internal processing error related to guest mappings. */
+#define VERR_PGM_MAPPING_IPE (-1676)
+/** An attempt was made to grow an already maxed out page pool. */
+#define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677)
+/** Internal processing error in the page pool code. */
+#define VERR_PGM_POOL_IPE (-1678)
+/** The write monitor is already engaged. */
+#define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679)
+/** Failed to get a guest page which is expected to be present. */
+#define VERR_PGM_PHYS_PAGE_GET_IPE (-1680)
+/** We were given a NULL pPage parameter. */
+#define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681)
+/** PCI passthru is not supported by this build. */
+#define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682)
+/** Too many MMIO2 ranges. */
+#define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683)
+/** Internal processing error in the PGM physical page mapping code dealing
+ * with MMIO2 pages. */
+#define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684)
+/** Internal processing error in the PGM physcal page handling code related to
+ * MMIO/MMIO2. */
+#define VERR_PGM_PHYS_MMIO_EX_IPE (-1685)
+/** Mode table internal error. */
+#define VERR_PGM_MODE_IPE (-1686)
+/** Shadow mode 'none' internal error. */
+#define VERR_PGM_SHW_NONE_IPE (-1687)
+/** @} */
+
+
+/** @name Memory Monitor (MM) Status Codes
+ * @{
+ */
+/** Attempt to register a RAM range of which parts are already
+ * covered by existing RAM ranges. */
+#define VERR_MM_RAM_CONFLICT (-1700)
+/** Hypervisor memory allocation failed. */
+#define VERR_MM_HYPER_NO_MEMORY (-1701)
+/** A bad trap type ended up in mmGCRamTrap0eHandler. */
+#define VERR_MM_BAD_TRAP_TYPE_IPE (-1702)
+/** @} */
+
+
+/** @name CPU Monitor (CPUM) Status Codes
+ * @{
+ */
+/** The caller shall raise an \#GP(0) exception. */
+#define VERR_CPUM_RAISE_GP_0 (-1750)
+/** Incompatible CPUM configuration. */
+#define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751)
+/** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden
+ * parts of the CS register. */
+#define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752)
+/** Couldn't find the end of CPUID sub-leaves. */
+#define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753)
+/** CPUM internal processing error \#1. */
+#define VERR_CPUM_IPE_1 (-1754)
+/** CPUM internal processing error \#2. */
+#define VERR_CPUM_IPE_2 (-1755)
+/** The specified CPU cannot be found in the CPU database. */
+#define VERR_CPUM_DB_CPU_NOT_FOUND (-1756)
+/** Invalid CPUMCPU offset in MSR range. */
+#define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757)
+/** Return to ring-3 to read the MSR there. */
+#define VINF_CPUM_R3_MSR_READ (1758)
+/** Return to ring-3 to write the MSR there. */
+#define VINF_CPUM_R3_MSR_WRITE (1759)
+/** Too many CPUID leaves. */
+#define VERR_TOO_MANY_CPUID_LEAVES (-1760)
+/** Invalid config value. */
+#define VERR_CPUM_INVALID_CONFIG_VALUE (-1761)
+/** The loaded XSAVE component mask is not compatible with the host CPU
+ * or/and VM config. */
+#define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762)
+/** The loaded XSAVE component mask is not valid. */
+#define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763)
+/** The loaded XSAVE header is not valid. */
+#define VERR_CPUM_INVALID_XSAVE_HDR (-1764)
+/** The loaded XCR0 register value is not valid. */
+#define VERR_CPUM_INVALID_XCR0 (-1765)
+/** Indicates that we modified the host CR0 (FPU related). */
+#define VINF_CPUM_HOST_CR0_MODIFIED (1766)
+/** Invalid/unsupported nested hardware virtualization configuration. */
+#define VERR_CPUM_INVALID_HWVIRT_CONFIG (-1767)
+/** Invalid nested hardware virtualization feature combination. */
+#define VERR_CPUM_INVALID_HWVIRT_FEAT_COMBO (-1768)
+/** @} */
+
+
+/** @name Save State Manager (SSM) Status Codes
+ * @{
+ */
+/** The specified data unit already exist. */
+#define VERR_SSM_UNIT_EXISTS (-1800)
+/** The specified data unit wasn't found. */
+#define VERR_SSM_UNIT_NOT_FOUND (-1801)
+/** The specified data unit wasn't owned by caller. */
+#define VERR_SSM_UNIT_NOT_OWNER (-1802)
+
+/** General saved state file integrity error. */
+#define VERR_SSM_INTEGRITY (-1810)
+/** The saved state file magic was not recognized. */
+#define VERR_SSM_INTEGRITY_MAGIC (-1811)
+/** The saved state file version is not supported. */
+#define VERR_SSM_INTEGRITY_VERSION (-1812)
+/** The saved state file size didn't match the one in the header. */
+#define VERR_SSM_INTEGRITY_SIZE (-1813)
+/** The CRC of the saved state file did not match. */
+#define VERR_SSM_INTEGRITY_CRC (-1814)
+/** The machine uuid field wasn't null. */
+#define VERR_SMM_INTEGRITY_MACHINE (-1815)
+/** Saved state header integrity error. */
+#define VERR_SSM_INTEGRITY_HEADER (-1816)
+/** Unit header integrity error. */
+#define VERR_SSM_INTEGRITY_UNIT (-1817)
+/** Invalid unit magic (internal data tag). */
+#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818)
+/** The file contained a data unit which no-one wants. */
+#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819)
+/** Incorrect version numbers in the header. */
+#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820)
+/** Footer integrity error. */
+#define VERR_SSM_INTEGRITY_FOOTER (-1821)
+/** Record header integrity error. */
+#define VERR_SSM_INTEGRITY_REC_HDR (-1822)
+/** Termination record integrity error. */
+#define VERR_SSM_INTEGRITY_REC_TERM (-1823)
+/** Termination record CRC mismatch. */
+#define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824)
+/** Decompression integrity error. */
+#define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825)
+/** Saved state directory wintertides error. */
+#define VERR_SSM_INTEGRITY_DIR (-1826)
+/** The saved state directory magic is wrong. */
+#define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827)
+
+/** A data unit in the saved state file was defined but didn't any
+ * routine for processing it. */
+#define VERR_SSM_NO_LOAD_EXEC (-1830)
+/** A restore routine attempted to load more data then the unit contained. */
+#define VERR_SSM_LOADED_TOO_MUCH (-1831)
+/** Not in the correct state for the attempted operation. */
+#define VERR_SSM_INVALID_STATE (-1832)
+/** Not in the correct state for the attempted operation. */
+#define VERR_SSM_LOADED_TOO_LITTLE (-1833)
+
+/** Unsupported data unit version.
+ * A SSM user returns this if it doesn't know the u32Version. */
+#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840)
+/** The format of a data unit has changed.
+ * A SSM user returns this if it's not able to read the format for
+ * other reasons than u32Version. */
+#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841)
+/** The CPUID instruction returns different information when loading than when saved.
+ * Normally caused by hardware changes on the host, but could also be caused by
+ * changes in the BIOS setup. */
+#define VERR_SSM_LOAD_CPUID_MISMATCH (-1842)
+/** The RAM size differs between the saved state and the VM config. */
+#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843)
+/** The state doesn't match the VM configuration in one or another way.
+ * (There are certain PCI reconfiguration which the OS could potentially
+ * do which can cause this problem. Check this out when it happens.) */
+#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844)
+/** The virtual clock frequency differs too much.
+ * The clock source for the virtual time isn't reliable or the code have changed. */
+#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845)
+/** A timeout occurred while waiting for async IDE operations to finish. */
+#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846)
+/** One of the structure magics was wrong. */
+#define VERR_SSM_STRUCTURE_MAGIC (-1847)
+/** The data in the saved state doesn't conform to expectations. */
+#define VERR_SSM_UNEXPECTED_DATA (-1848)
+/** Trying to read a 64-bit guest physical address into a 32-bit variable. */
+#define VERR_SSM_GCPHYS_OVERFLOW (-1849)
+/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
+#define VERR_SSM_GCPTR_OVERFLOW (-1850)
+/** Vote for another pass. */
+#define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851
+/** Vote for done tell SSM not to call again until the final pass. */
+#define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852
+/** Vote for giving up. */
+#define VERR_SSM_VOTE_FOR_GIVING_UP (-1853)
+/** Don't call again until the final pass. */
+#define VINF_SSM_DONT_CALL_AGAIN 1854
+/** Giving up a live snapshot/teleportation attempt because of too many
+ * passes. */
+#define VERR_SSM_TOO_MANY_PASSES (-1855)
+/** Giving up a live snapshot/teleportation attempt because the state grew to
+ * big. */
+#define VERR_SSM_STATE_GREW_TOO_BIG (-1856)
+/** Giving up a live snapshot attempt because we're low on disk space. */
+#define VERR_SSM_LOW_ON_DISK_SPACE (-1857)
+/** The operation was cancelled. */
+#define VERR_SSM_CANCELLED (-1858)
+/** Nothing that can be cancelled. */
+#define VERR_SSM_NO_PENDING_OPERATION (-1859)
+/** The operation has already been cancelled. */
+#define VERR_SSM_ALREADY_CANCELLED (-1860)
+/** The machine was powered off while saving. */
+#define VERR_SSM_LIVE_POWERED_OFF (-1861)
+/** The live snapshot/teleportation operation was aborted because of a guru
+ * meditation. */
+#define VERR_SSM_LIVE_GURU_MEDITATION (-1862)
+/** The live snapshot/teleportation operation was aborted because of a fatal
+ * runtime error. */
+#define VERR_SSM_LIVE_FATAL_ERROR (-1863)
+/** The VM was suspended before or while saving, don't resume execution. */
+#define VINF_SSM_LIVE_SUSPENDED 1864
+/** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the
+ * extended API. */
+#define VERR_SSM_FIELD_COMPLEX (-1864)
+/** Invalid size of a SSM field with the specified transformation. */
+#define VERR_SSM_FIELD_INVALID_SIZE (-1865)
+/** The specified field is outside the structure. */
+#define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866)
+/** The field does not follow immediately the previous one. */
+#define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867)
+/** The field contains an invalid callback or transformation index. */
+#define VERR_SSM_FIELD_INVALID_CALLBACK (-1868)
+/** The field contains an invalid padding size. */
+#define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869)
+/** The field contains a value that is out of range. */
+#define VERR_SSM_FIELD_INVALID_VALUE (-1870)
+/** Generic stream error. */
+#define VERR_SSM_STREAM_ERROR (-1871)
+/** SSM did a callback for a pass we didn't expect. */
+#define VERR_SSM_UNEXPECTED_PASS (-1872)
+/** Someone is trying to skip backwards in the stream... */
+#define VERR_SSM_SKIP_BACKWARDS (-1873)
+/** Someone is trying to write a memory block which is too big to encode. */
+#define VERR_SSM_MEM_TOO_BIG (-1874)
+/** Encountered an bad (/unknown) record type. */
+#define VERR_SSM_BAD_REC_TYPE (-1875)
+/** Internal processing error \#1 in SSM code. */
+#define VERR_SSM_IPE_1 (-1876)
+/** Internal processing error \#2 in SSM code. */
+#define VERR_SSM_IPE_2 (-1877)
+/** Internal processing error \#3 in SSM code. */
+#define VERR_SSM_IPE_3 (-1878)
+/** A field contained an transformation that should only be used when loading
+ * old states. */
+#define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879)
+/** @} */
+
+
+/** @name Virtual Machine (VM) Status Codes
+ * @{
+ */
+/** The specified at reset handler wasn't found. */
+#define VERR_VM_ATRESET_NOT_FOUND (-1900)
+/** Invalid VM request type.
+ * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
+ * all the other occurrences it means indicates corruption, broken logic, or stupid
+ * interface user. */
+#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
+/** Invalid VM request state.
+ * The state of the request packet was not the expected and accepted one(s). Either
+ * the interface user screwed up, or we've got corruption/broken logic. */
+#define VERR_VM_REQUEST_STATE (-1902)
+/** Invalid VM request packet.
+ * One or more of the VM controlled packet members didn't contain the correct
+ * values. Some thing's broken. */
+#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
+/** The status field has not been updated yet as the request is still
+ * pending completion. Someone queried the iStatus field before the request
+ * has been fully processed. */
+#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
+/** The request has been freed, don't read the status now.
+ * Someone is reading the iStatus field of a freed request packet. */
+#define VERR_VM_REQUEST_STATUS_FREED (-1905)
+/** A VM api requiring EMT was called from another thread.
+ * Use the VMR3ReqCall() apis to call it! */
+#define VERR_VM_THREAD_NOT_EMT (-1906)
+/** The VM state was invalid for the requested operation.
+ * Go check the 'VM Statechart Diagram.gif'. */
+#define VERR_VM_INVALID_VM_STATE (-1907)
+/** The support driver is not installed.
+ * On linux, open returned ENOENT. */
+#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
+/** The support driver is not accessible.
+ * On linux, open returned EPERM. */
+#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
+/** Was not able to load the support driver.
+ * On linux, open returned ENODEV. */
+#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
+/** Was not able to open the support driver.
+ * Generic open error used when none of the other ones fit. */
+#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
+/** The installed support driver doesn't match the version of the user. */
+#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
+/** Saving the VM state is temporarily not allowed. Try again later. */
+#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
+/** An EMT called an API which cannot be called on such a thread. */
+#define VERR_VM_THREAD_IS_EMT (-1914)
+/** Encountered an unexpected VM state. */
+#define VERR_VM_UNEXPECTED_VM_STATE (-1915)
+/** Unexpected unstable VM state. */
+#define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916)
+/** Too many arguments passed to a VM request / request corruption. */
+#define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917)
+/** Fatal EMT wait error. */
+#define VERR_VM_FATAL_WAIT_ERROR (-1918)
+/** The VM request was killed at VM termination. */
+#define VERR_VM_REQUEST_KILLED (-1919)
+/** @} */
+
+
+/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
+ * @{
+ */
+/** Successful completion of operation (mapped to generic iprt status code). */
+#define VINF_VRDP_SUCCESS VINF_SUCCESS
+/** VRDP transport operation timed out (mapped to generic iprt status code). */
+#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
+
+/** Unsupported ISO protocol feature */
+#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
+/** Security (en/decryption) engine error */
+#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
+/** VRDP protocol violation */
+#define VERR_VRDP_PROTOCOL_ERROR (-2002)
+/** Unsupported VRDP protocol feature */
+#define VERR_VRDP_NOT_SUPPORTED (-2003)
+/** VRDP protocol violation, client sends less data than expected */
+#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
+/** Internal error, VRDP packet is in wrong operation mode */
+#define VERR_VRDP_INVALID_MODE (-2005)
+/** Memory allocation failed */
+#define VERR_VRDP_NO_MEMORY (-2006)
+/** Client has been rejected */
+#define VERR_VRDP_ACCESS_DENIED (-2007)
+/** VRPD receives a packet that is not supported */
+#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
+/** VRDP script allowed the packet to be processed further */
+#define VINF_VRDP_PROCESS_PDU 2009
+/** VRDP script has completed its task */
+#define VINF_VRDP_OPERATION_COMPLETED 2010
+/** VRDP thread has started OK and will run */
+#define VINF_VRDP_THREAD_STARTED 2011
+/** Framebuffer is resized, terminate send bitmap procedure */
+#define VINF_VRDP_RESIZE_REQUESTED 2012
+/** Output can be enabled for the client. */
+#define VINF_VRDP_OUTPUT_ENABLE 2013
+/** @} */
+
+
+/** @name Configuration Manager (CFGM) Status Codes
+ * @{
+ */
+/** The integer value was too big for the requested representation. */
+#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
+/** Child node was not found. */
+#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
+/** Path to child node was invalid (i.e. empty). */
+#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
+/** Value not found. */
+#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
+/** No parent node specified. */
+#define VERR_CFGM_NO_PARENT (-2104)
+/** No node was specified. */
+#define VERR_CFGM_NO_NODE (-2105)
+/** The value is not an integer. */
+#define VERR_CFGM_NOT_INTEGER (-2106)
+/** The value is not a zero terminated character string. */
+#define VERR_CFGM_NOT_STRING (-2107)
+/** The value is not a byte string. */
+#define VERR_CFGM_NOT_BYTES (-2108)
+/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
+#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
+/** The path of a new node contained slashes or was empty. */
+#define VERR_CFGM_INVALID_NODE_PATH (-2160)
+/** A new node couldn't be inserted because one with the same name exists. */
+#define VERR_CFGM_NODE_EXISTS (-2161)
+/** A new leaf couldn't be inserted because one with the same name exists. */
+#define VERR_CFGM_LEAF_EXISTS (-2162)
+/** An unknown config value was encountered. */
+#define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163)
+/** An unknown config node (key) was encountered. */
+#define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164)
+/** Internal processing error \#1 in CFGM. */
+#define VERR_CFGM_IPE_1 (-2165)
+/** @} */
+
+
+/** @name Time Manager (TM) Status Codes
+ * @{
+ */
+/** The loaded timer state was incorrect. */
+#define VERR_TM_LOAD_STATE (-2200)
+/** The timer was not in the correct state for the request operation. */
+#define VERR_TM_INVALID_STATE (-2201)
+/** The timer was in a unknown state. Corruption or stupid coding error. */
+#define VERR_TM_UNKNOWN_STATE (-2202)
+/** The timer was stuck in an unstable state until we grew impatient and returned. */
+#define VERR_TM_UNSTABLE_STATE (-2203)
+/** TM requires GIP. */
+#define VERR_TM_GIP_REQUIRED (-2204)
+/** TM does not support the GIP version. */
+#define VERR_TM_GIP_VERSION (-2205)
+/** The GIP update interval is too large. */
+#define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206)
+/** The timer has a bad clock enum value, probably corruption. */
+#define VERR_TM_TIMER_BAD_CLOCK (-2207)
+/** The timer failed to reach a stable state. */
+#define VERR_TM_TIMER_UNSTABLE_STATE (-2208)
+/** Attempt to resume a running TSC. */
+#define VERR_TM_TSC_ALREADY_TICKING (-2209)
+/** Attempt to pause a paused TSC. */
+#define VERR_TM_TSC_ALREADY_PAUSED (-2210)
+/** Invalid value for cVirtualTicking. */
+#define VERR_TM_VIRTUAL_TICKING_IPE (-2211)
+/** @} */
+
+
+/** @name Recompiled Execution Manager (REM) Status Codes
+ * @{
+ */
+/** Fatal error in virtual hardware. */
+#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
+/** Fatal error in the recompiler cpu. */
+#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
+/** Recompiler execution was interrupted by forced action. */
+#define VINF_REM_INTERRUPED_FF 2302
+/** Too many similar traps. This is a very useful debug only
+ * check (we don't do double/triple faults in REM). */
+#define VERR_REM_TOO_MANY_TRAPS (-2304)
+/** The REM is out of breakpoint slots. */
+#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
+/** The REM could not find any breakpoint on the specified address. */
+#define VERR_REM_BP_NOT_FOUND (-2306)
+/** @} */
+
+
+/** @name Trap Manager / Monitor (TRPM) Status Codes
+ * @{
+ */
+/** No active trap. Cannot query or reset a non-existing trap. */
+#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
+/** Active trap. Cannot assert a new trap when one is already active. */
+#define VERR_TRPM_ACTIVE_TRAP (-2401)
+/** Reason for leaving RC: Guest tried to write to our IDT - fatal.
+ * The VM will be terminated assuming the worst, i.e. that the
+ * guest has read the idtr register. */
+#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
+/** Reason for leaving RC: Fatal trap in hypervisor. */
+#define VERR_TRPM_DONT_PANIC (-2403)
+/** Reason for leaving RC: Double Fault. */
+#define VERR_TRPM_PANIC (-2404)
+/** The exception was dispatched for raw-mode execution. */
+#define VINF_TRPM_XCPT_DISPATCHED 2405
+/** Bad TRPM_TRAP_IN_OP. */
+#define VERR_TRPM_BAD_TRAP_IN_OP (-2406)
+/** Internal processing error \#1 in TRPM. */
+#define VERR_TRPM_IPE_1 (-2407)
+/** Internal processing error \#2 in TRPM. */
+#define VERR_TRPM_IPE_2 (-2408)
+/** Internal processing error \#3 in TRPM. */
+#define VERR_TRPM_IPE_3 (-2409)
+/** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */
+#define VERR_TRPM_HM_IPE (-2410)
+/** @} */
+
+
+/** @name Selector Manager / Monitor (SELM) Status Code
+ * @{
+ */
+/** Reason for leaving RC: Guest tried to write to our GDT - fatal.
+ * The VM will be terminated assuming the worst, i.e. that the
+ * guest has read the gdtr register. */
+#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
+/** Reason for leaving RC: Guest tried to write to our LDT - fatal.
+ * The VM will be terminated assuming the worst, i.e. that the
+ * guest has read the ldtr register. */
+#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
+/** Reason for leaving RC: Guest tried to write to our TSS - fatal.
+ * The VM will be terminated assuming the worst, i.e. that the
+ * guest has read the ltr register. */
+#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
+/** Reason for leaving RC: Sync the GDT table to solve a conflict. */
+#define VINF_SELM_SYNC_GDT 2503
+/** No valid TSS present. */
+#define VERR_SELM_NO_TSS (-2504)
+/** Invalid guest LDT selector. */
+#define VERR_SELM_INVALID_LDT (-2505)
+/** The guest LDT selector is out of bounds. */
+#define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506)
+/** Unknown error while reading the guest GDT during shadow table updating. */
+#define VERR_SELM_GDT_READ_ERROR (-2507)
+/** The guest GDT so full that we cannot find free space for our own
+ * selectors. */
+#define VERR_SELM_GDT_TOO_FULL (-2508)
+/** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */
+#define VERR_SELM_HM_IPE (-2509)
+/** @} */
+
+
+/** @name I/O Manager / Monitor (IOM) Status Code
+ * @{
+ */
+/** The specified I/O port range was invalid.
+ * It was either empty or it was out of bounds. */
+#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
+/** The specified R0 or RC I/O port range didn't have a corresponding R3 range.
+ * IOMR3IOPortRegisterR3() must be called first. */
+#define VERR_IOM_NO_R3_IOPORT_RANGE (-2601)
+/** The specified I/O port range intruded on an existing range. There is
+ * a I/O port conflict between two device, or a device tried to register
+ * the same range twice. */
+#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
+/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
+#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
+/** The specified I/O port range was owned by some other device(s). Both registration
+ * and deregistration, but in the first case only RC and R0 ranges. */
+#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
+
+/** The specified MMIO range was invalid.
+ * It was either empty or it was out of bounds. */
+#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
+/** The specified R0 or RC MMIO range didn't have a corresponding R3 range.
+ * IOMR3MMIORegisterR3() must be called first. */
+#define VERR_IOM_NO_R3_MMIO_RANGE (-2606)
+/** The specified MMIO range was owned by some other device(s). Both registration
+ * and deregistration, but in the first case only RC and R0 ranges. */
+#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
+/** The specified MMIO range intruded on an existing range. There is
+ * a MMIO conflict between two device, or a device tried to register
+ * the same range twice. */
+#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
+/** The MMIO range specified for removal was not found. */
+#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
+/** The MMIO range specified for removal was invalid. The range didn't match
+ * quite match a set of existing ranges. It's not possible to remove parts of
+ * a MMIO range, only one or more full ranges. */
+#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
+/** An invalid I/O port size was specified for a read or write operation. */
+#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
+/** The MMIO handler was called for a bogus address! Internal error! */
+#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
+/** The MMIO handler experienced a problem with the disassembler. */
+#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
+/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
+#define VERR_IOM_IOPORT_UNUSED (-2614)
+/** Unused MMIO register read, fill with 00. */
+#define VINF_IOM_MMIO_UNUSED_00 2615
+/** Unused MMIO register read, fill with FF. */
+#define VINF_IOM_MMIO_UNUSED_FF 2616
+
+/** Reason for leaving RZ: I/O port read. */
+#define VINF_IOM_R3_IOPORT_READ 2620
+/** Reason for leaving RZ: I/O port write. */
+#define VINF_IOM_R3_IOPORT_WRITE 2621
+/** Reason for leaving RZ: Pending I/O port write. Since there is also
+ * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
+ * some other VINF_EM_XXX statuses. */
+#define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622
+/** Reason for leaving RZ: MMIO read. */
+#define VINF_IOM_R3_MMIO_READ 2623
+/** Reason for leaving RZ: MMIO write. */
+#define VINF_IOM_R3_MMIO_WRITE 2624
+/** Reason for leaving RZ: MMIO read/write. */
+#define VINF_IOM_R3_MMIO_READ_WRITE 2625
+/** Reason for leaving RZ: Pending MMIO write. Since there is also
+ * VMCPU_FF_IOM for this condition, it's ok to drop this status code for
+ * some other VINF_EM_XXX statuses. */
+#define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626
+
+/** IOMGCIOPortHandler was given an unexpected opcode. */
+#define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630)
+/** Internal processing error \#1 in the I/O port code. */
+#define VERR_IOM_IOPORT_IPE_1 (-2631)
+/** Internal processing error \#2 in the I/O port code. */
+#define VERR_IOM_IOPORT_IPE_2 (-2632)
+/** Internal processing error \#3 in the I/O port code. */
+#define VERR_IOM_IOPORT_IPE_3 (-2633)
+/** Internal processing error \#1 in the MMIO code. */
+#define VERR_IOM_MMIO_IPE_1 (-2634)
+/** Internal processing error \#2 in the MMIO code. */
+#define VERR_IOM_MMIO_IPE_2 (-2635)
+/** Internal processing error \#3 in the MMIO code. */
+#define VERR_IOM_MMIO_IPE_3 (-2636)
+/** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */
+#define VERR_IOM_HM_IPE (-2637)
+/** Internal processing error while merging status codes. */
+#define VERR_IOM_FF_STATUS_IPE (-2638)
+
+/** Too many I/O port registrations. */
+#define VERR_IOM_TOO_MANY_IOPORT_REGISTRATIONS (-2650)
+/** Invalid I/O port handle. */
+#define VERR_IOM_INVALID_IOPORT_HANDLE (-2651)
+/** I/O ports are already mapped. */
+#define VERR_IOM_IOPORTS_ALREADY_MAPPED (-2652)
+/** I/O ports are not mapped. */
+#define VERR_IOM_IOPORTS_NOT_MAPPED (-2653)
+
+/** Too many MMIO registrations. */
+#define VERR_IOM_TOO_MANY_MMIO_REGISTRATIONS (-2660)
+/** Invalid MMIO handle. */
+#define VERR_IOM_INVALID_MMIO_HANDLE (-2661)
+/** MMIO region is already mapped. */
+#define VERR_IOM_MMIO_REGION_ALREADY_MAPPED (-2662)
+/** MMIO region is not mapped. */
+#define VERR_IOM_MMIO_REGION_NOT_MAPPED (-2663)
+/** @} */
+
+
+/** @name Virtual Machine Monitor (VMM) Status Codes
+ * @{
+ */
+/** Reason for leaving RZ: Calling host function. */
+#define VINF_VMM_CALL_HOST 2700
+/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
+#define VERR_VMM_RING0_ASSERTION (-2701)
+/** The hyper CR3 differs between PGM and CPUM. */
+#define VERR_VMM_HYPER_CR3_MISMATCH (-2702)
+/** Reason for leaving RZ: Illegal call to ring-3. */
+#define VERR_VMM_RING3_CALL_DISABLED (-2703)
+/** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib.
+ * If you just upgraded VirtualBox, please terminate all VMs and make sure
+ * that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again.
+ * If this error persists, try re-installing VirtualBox. */
+#define VERR_VMM_R0_VERSION_MISMATCH (-2704)
+/** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib.
+ * Re-install if you are a user. Developers should make sure the build is
+ * complete or try with a clean build. */
+#define VERR_VMM_RC_VERSION_MISMATCH (-2705)
+/** VMM set jump error. */
+#define VERR_VMM_SET_JMP_ERROR (-2706)
+/** VMM set jump stack overflow error. */
+#define VERR_VMM_SET_JMP_STACK_OVERFLOW (-2707)
+/** VMM set jump resume error. */
+#define VERR_VMM_SET_JMP_ABORTED_RESUME (-2708)
+/** VMM long jump error. */
+#define VERR_VMM_LONG_JMP_ERROR (-2709)
+/** Unknown ring-3 call attempted. */
+#define VERR_VMM_UNKNOWN_RING3_CALL (-2710)
+/** The ring-3 call didn't set an RC. */
+#define VERR_VMM_RING3_CALL_NO_RC (-2711)
+/** Reason for leaving RC: Caller the tracer in ring-0. */
+#define VINF_VMM_CALL_TRACER (2712)
+/** Internal processing error \#1 in the switcher code. */
+#define VERR_VMM_SWITCHER_IPE_1 (-2713)
+/** Reason for leaving RZ: Unknown call to ring-3. */
+#define VINF_VMM_UNKNOWN_RING3_CALL (2714)
+/** Attempted to use stub switcher. */
+#define VERR_VMM_SWITCHER_STUB (-2715)
+/** HM returned in the wrong state. */
+#define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716)
+/** SMAP enabled, but the AC flag was found to be clear - check the kernel
+ * log for details. */
+#define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717)
+/** NEM returned in the wrong state. */
+#define VERR_VMM_WRONG_NEM_VMCPU_STATE (-2718)
+/** @} */
+
+
+/** @name Pluggable Device and Driver Manager (PDM) Status Codes
+ * @{
+ */
+/** An invalid LUN specification was given. */
+#define VERR_PDM_NO_SUCH_LUN (-2800)
+/** A device encountered an unknown configuration value.
+ * This means that the device is potentially misconfigured and the device
+ * construction or unit attachment failed because of this. */
+#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
+/** The above driver doesn't export a interface required by a driver being
+ * attached to it. Typical misconfiguration problem. */
+#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
+/** The below driver doesn't export a interface required by the drive
+ * having attached it. Typical misconfiguration problem. */
+#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
+/** A device didn't find a required interface with an attached driver.
+ * Typical misconfiguration problem. */
+#define VERR_PDM_MISSING_INTERFACE (-2804)
+/** A driver encountered an unknown configuration value.
+ * This means that the driver is potentially misconfigured and the driver
+ * construction failed because of this. */
+#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
+/** The PCI bus assigned to a device didn't have room for it.
+ * Either too many devices are configured on the same PCI bus, or there are
+ * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
+#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
+/** A queue is out of free items, the queueing operation failed. */
+#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
+/** Not possible to attach further drivers to the driver.
+ * A driver which doesn't support attachments (below of course) will
+ * return this status code if it found that further drivers were configured
+ * to be attached to it. */
+#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
+/** Not possible to attach drivers to the device.
+ * A device which doesn't support attachments (below of course) will
+ * return this status code if it found that drivers were configured
+ * to be attached to it. */
+#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
+/** No attached driver.
+ * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
+ * this error when no driver was configured to be attached. */
+#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
+/** The media geometry hasn't been set yet, so it cannot be obtained.
+ * The caller should then calculate the geometry from the media size. */
+#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
+/** The media translation hasn't been set yet, so it cannot be obtained.
+ * The caller should then guess the translation. */
+#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
+/** The media is not mounted, operation requires a mounted media. */
+#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
+/** Mount failed because a media was already mounted. Unmount the media
+ * and retry the mount. */
+#define VERR_PDM_MEDIA_MOUNTED (-2814)
+/** The media is locked and cannot be unmounted. */
+#define VERR_PDM_MEDIA_LOCKED (-2815)
+/** No 'Type' attribute in the DrvBlock configuration.
+ * Misconfiguration. */
+#define VERR_PDM_BLOCK_NO_TYPE (-2816)
+/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
+ * Misconfiguration. */
+#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
+/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
+ * Misconfiguration. */
+#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
+/** The block driver type wasn't supported.
+ * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
+#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
+/** A attach or prepare mount call failed because the driver already
+ * had a driver attached. */
+#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
+/** An attempt on detaching a driver without anyone actually being attached, or
+ * performing any other operation on an attached driver. */
+#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
+/** The attached driver configuration is missing the 'Driver' attribute. */
+#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
+/** The configured driver wasn't found.
+ * Either the necessary driver modules wasn't loaded, the name was
+ * misspelled, or it was a misconfiguration. */
+#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
+/** The Ring-3 module was already loaded. */
+#define VINF_PDM_ALREADY_LOADED (2824)
+/** The name of the module clashed with an existing module. */
+#define VERR_PDM_MODULE_NAME_CLASH (-2825)
+/** Couldn't find any export for registration of drivers/devices. */
+#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
+/** A module name is too long. */
+#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
+/** Driver name clash. Another driver with the same name as the
+ * one being registered exists. */
+#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
+/** The version of the driver registration structure is unknown
+ * to this VBox version. Either mixing incompatible versions or
+ * the structure isn't correctly initialized. */
+#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
+/** Invalid entry in the driver registration structure. */
+#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
+/** Invalid host bit mask. */
+#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
+/** Not possible to detach a driver because the above driver/device
+ * doesn't support it. The above entity doesn't implement the pfnDetach call. */
+#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
+/** No PCI Bus is available to register the device with. This is usually a
+ * misconfiguration or in rare cases a buggy pci device. */
+#define VERR_PDM_NO_PCI_BUS (-2833)
+/** The device is not a registered PCI device and thus cannot
+ * perform any PCI operations. The device forgot to register it self. */
+#define VERR_PDM_NOT_PCI_DEVICE (-2834)
+
+/** The version of the device registration structure is unknown
+ * to this VBox version. Either mixing incompatible versions or
+ * the structure isn't correctly initialized. */
+#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
+/** Invalid entry in the device registration structure. */
+#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
+/** Invalid host bit mask. */
+#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
+/** The guest bit mask didn't match the guest being loaded. */
+#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
+/** Device name clash. Another device with the same name as the
+ * one being registered exists. */
+#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
+/** The device wasn't found. There was no registered device
+ * by that name. */
+#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
+/** The device instance was not found. */
+#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
+/** The device instance have no base interface. */
+#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
+/** The device instance have no such logical unit. */
+#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
+/** The driver instance could not be found. */
+#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
+/** Logical Unit was not found. */
+#define VERR_PDM_LUN_NOT_FOUND (-2845)
+/** The Logical Unit was found, but it had no driver attached to it. */
+#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
+/** The Logical Unit was found, but it had no driver attached to it. */
+#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
+/** No PIC device instance is registered with the current VM and thus
+ * the PIC operation cannot be performed. */
+#define VERR_PDM_NO_PIC_INSTANCE (-2847)
+/** No APIC device instance is registered with the current VM and thus
+ * the APIC operation cannot be performed. */
+#define VERR_PDM_NO_APIC_INSTANCE (-2848)
+/** No DMAC device instance is registered with the current VM and thus
+ * the DMA operation cannot be performed. */
+#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
+/** No RTC device instance is registered with the current VM and thus
+ * the RTC or CMOS operation cannot be performed. */
+#define VERR_PDM_NO_RTC_INSTANCE (-2850)
+/** Unable to open the host interface due to a sharing violation . */
+#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
+/** Unable to open the host interface. */
+#define VERR_PDM_HIF_OPEN_FAILED (-2852)
+/** The device doesn't support runtime driver attaching.
+ * The PDMDEVREG::pfnAttach callback function is NULL. */
+#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
+/** The driver doesn't support runtime driver attaching.
+ * The PDMDRVREG::pfnAttach callback function is NULL. */
+#define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854)
+/** Invalid host interface version. */
+#define VERR_PDM_HIF_INVALID_VERSION (-2855)
+
+/** The version of the USB device registration structure is unknown
+ * to this VBox version. Either mixing incompatible versions or
+ * the structure isn't correctly initialized. */
+#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
+/** Invalid entry in the device registration structure. */
+#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
+/** Driver name clash. Another driver with the same name as the
+ * one being registered exists. */
+#define VERR_PDM_USB_NAME_CLASH (-2858)
+/** The USB hub is already registered. */
+#define VERR_PDM_USB_HUB_EXISTS (-2859)
+/** Couldn't find any USB hubs to attach the device to. */
+#define VERR_PDM_NO_USB_HUBS (-2860)
+/** Couldn't find any free USB ports to attach the device to. */
+#define VERR_PDM_NO_USB_PORTS (-2861)
+/** Couldn't find the USB Proxy device. Using OSE? */
+#define VERR_PDM_NO_USBPROXY (-2862)
+/** The async completion template is still used. */
+#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
+/** The async completion task is already suspended. */
+#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
+/** The async completion task is not suspended. */
+#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
+/** The driver properties were invalid, and as a consequence construction
+ * failed. Caused my unusable media or similar problems. */
+#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
+/** Too many instances of a device. */
+#define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867)
+/** Too many instances of a driver. */
+#define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868)
+/** Too many instances of a usb device. */
+#define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869)
+/** The device instance structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870)
+/** The device helper structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DEVHLP_VERSION_MISMATCH (-2871)
+/** The USB device instance structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_USBINS_VERSION_MISMATCH (-2872)
+/** The USB device helper structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873)
+/** The driver instance structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874)
+/** The driver helper structure version has changed.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875)
+/** Generic device structure version mismatch.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876)
+/** Generic USB device structure version mismatch.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877)
+/** Generic driver structure version mismatch.
+ *
+ * If you have upgraded VirtualBox recently, please make sure you have
+ * terminated all VMs and upgraded any extension packs. If this error
+ * persists, try re-installing VirtualBox. */
+#define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878)
+/** PDMVMMDevHeapR3ToGCPhys failure. */
+#define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879)
+/** A legacy device isn't implementing the HPET notification interface. */
+#define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880)
+/** Internal processing error in the critical section code. */
+#define VERR_PDM_CRITSECT_IPE (-2881)
+/** The critical section being deleted was not found. */
+#define VERR_PDM_CRITSECT_NOT_FOUND (-2882)
+/** A PDMThread API was called by the wrong thread. */
+#define VERR_PDM_THREAD_INVALID_CALLER (-2883)
+/** Internal processing error \#1 in the PDM Thread code. */
+#define VERR_PDM_THREAD_IPE_1 (-2884)
+/** Internal processing error \#2 in the PDM Thread code. */
+#define VERR_PDM_THREAD_IPE_2 (-2885)
+/** Only one PCI function is supported per PDM device. */
+#define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886)
+/** Bad PCI configuration. */
+#define VERR_PDM_BAD_PCI_CONFIG (-2887)
+/** Internal processing error # in the PDM device code. */
+#define VERR_PDM_DEV_IPE_1 (-2888)
+/** Misconfigured driver chain transformation. */
+#define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889)
+/** The driver is already removed, not more transformations possible (at
+ * present). */
+#define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890)
+/** The PCI device isn't configured as a busmaster, physical memory access
+ * rejected. */
+#define VERR_PDM_NOT_PCI_BUS_MASTER (-2891)
+/** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */
+#define VERR_PDM_HM_IPE (-2892)
+/** The I/O request was canceled. */
+#define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893)
+/** There is not enough room to store the data. */
+#define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894)
+/** There is not enough data to satisfy the request. */
+#define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895)
+/** The I/O request ID is already existing. */
+#define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896)
+/** The I/O request ID was not found. */
+#define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897)
+/** The I/O request is in progress. */
+#define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898
+/** The I/O request is in an invalid state for this operation. */
+#define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899)
+
+/** Returned by PCI config space callbacks to indicate taking default action. */
+#define VINF_PDM_PCI_DO_DEFAULT (7200)
+/** @} */
+
+
+/** @name Host-Guest Communication Manager (HGCM) Status Codes
+ * @{
+ */
+/** Requested service does not exist. */
+#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
+/** Service rejected client connection */
+#define VINF_HGCM_CLIENT_REJECTED 2901
+/** Command address is invalid. */
+#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
+/** Service will execute the command in background. */
+#define VINF_HGCM_ASYNC_EXECUTE 2903
+/** HGCM could not perform requested operation because of an internal error. */
+#define VERR_HGCM_INTERNAL (-2904)
+/** Invalid HGCM client id. */
+#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
+/** The HGCM is saving state. */
+#define VINF_HGCM_SAVE_STATE (2906)
+/** Requested service already exists. */
+#define VERR_HGCM_SERVICE_EXISTS (-2907)
+
+/** @} */
+
+
+/** @name Network Address Translation Driver (DrvNAT) Status Codes
+ * @{
+ */
+/** Failed to convert the specified Guest IP to a binary IP address.
+ * Malformed input. */
+#define VERR_NAT_REDIR_GUEST_IP (-3001)
+/** Failed while setting up a redirector rule.
+ * There probably is a conflict between the rule and some existing
+ * service on the computer. */
+#define VERR_NAT_REDIR_SETUP (-3002)
+/** @} */
+
+
+/** @name HostIF Driver (DrvTUN) Status Codes
+ * @{
+ */
+/** The Host Interface Networking init program failed. */
+#define VERR_HOSTIF_INIT_FAILED (-3100)
+/** The Host Interface Networking device name is too long. */
+#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
+/** The Host Interface Networking name config IOCTL call failed. */
+#define VERR_HOSTIF_IOCTL (-3102)
+/** Failed to make the Host Interface Networking handle non-blocking. */
+#define VERR_HOSTIF_BLOCKING (-3103)
+/** If a Host Interface Networking filehandle was specified it's not allowed to
+ * have any init or term programs. */
+#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
+/** The Host Interface Networking terminate program failed. */
+#define VERR_HOSTIF_TERM_FAILED (-3105)
+/** @} */
+
+
+/** @name VBox HDD Container (VD) Status Codes
+ * @{
+ */
+/** Invalid image type. */
+#define VERR_VD_INVALID_TYPE (-3200)
+/** Operation can't be done in current HDD container state. */
+#define VERR_VD_INVALID_STATE (-3201)
+/** Configuration value not found. */
+#define VERR_VD_VALUE_NOT_FOUND (-3202)
+/** Virtual HDD is not opened. */
+#define VERR_VD_NOT_OPENED (-3203)
+/** Requested image is not opened. */
+#define VERR_VD_IMAGE_NOT_FOUND (-3204)
+/** Image is read-only. */
+#define VERR_VD_IMAGE_READ_ONLY (-3205)
+/** Geometry hasn't been set. */
+#define VERR_VD_GEOMETRY_NOT_SET (-3206)
+/** No data for this block in image. */
+#define VERR_VD_BLOCK_FREE (-3207)
+/** Differencing and parent images can't be used together due to UUID. */
+#define VERR_VD_UUID_MISMATCH (-3208)
+/** Asynchronous I/O request finished. */
+#define VINF_VD_ASYNC_IO_FINISHED 3209
+/** Asynchronous I/O is not finished yet. */
+#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
+/** The image is too small or too large for this format. */
+#define VERR_VD_INVALID_SIZE (-3211)
+/** Configuration value is unknown. This indicates misconfiguration. */
+#define VERR_VD_UNKNOWN_CFG_VALUES (-3212)
+/** Interface is unknown. This indicates misconfiguration. */
+#define VERR_VD_UNKNOWN_INTERFACE (-3213)
+/** The DEK for disk encryption is missing. */
+#define VERR_VD_DEK_MISSING (-3214)
+/** The provided password to decrypt the DEK was incorrect. */
+#define VERR_VD_PASSWORD_INCORRECT (-3215)
+/** Generic: Invalid image file header. Use this for plugins. */
+#define VERR_VD_GEN_INVALID_HEADER (-3220)
+/** VDI: Invalid image file header. */
+#define VERR_VD_VDI_INVALID_HEADER (-3230)
+/** VDI: Invalid image file header: invalid signature. */
+#define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
+/** VDI: Invalid image file header: invalid version. */
+#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
+/** Comment string is too long. */
+#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
+/** VMDK: Invalid image file header. */
+#define VERR_VD_VMDK_INVALID_HEADER (-3240)
+/** VMDK: Invalid image file header: invalid version. */
+#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
+/** VMDK: Image property not found. */
+#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
+/** VMDK: Operation can't be done in current image state. */
+#define VERR_VD_VMDK_INVALID_STATE (-3243)
+/** VMDK: Format is invalid/inconsistent. */
+#define VERR_VD_VMDK_INVALID_FORMAT (-3244)
+/** VMDK: Invalid write position. */
+#define VERR_VD_VMDK_INVALID_WRITE (-3245)
+/** iSCSI: Invalid header, i.e. dummy for validity check. */
+#define VERR_VD_ISCSI_INVALID_HEADER (-3250)
+/** iSCSI: Operation can't be done in current image state. */
+#define VERR_VD_ISCSI_INVALID_STATE (-3251)
+/** iSCSI: Invalid device type (not a disk). */
+#define VERR_VD_ISCSI_INVALID_TYPE (-3252)
+/** iSCSI: Initiator secret not decrypted */
+#define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253)
+/** VHD: Invalid image file header. */
+#define VERR_VD_VHD_INVALID_HEADER (-3260)
+/** Parallels HDD: Invalid image file header. */
+#define VERR_VD_PARALLELS_INVALID_HEADER (-3265)
+/** DMG: Invalid image file header. */
+#define VERR_VD_DMG_INVALID_HEADER (-3267)
+/** Raw: Invalid image file header. */
+#define VERR_VD_RAW_INVALID_HEADER (-3270)
+/** Raw: Invalid image file type. */
+#define VERR_VD_RAW_INVALID_TYPE (-3271)
+/** The backend needs more metadata before it can continue. */
+#define VERR_VD_NOT_ENOUGH_METADATA (-3272)
+/** Halt the current I/O context until further notification from the backend. */
+#define VERR_VD_IOCTX_HALT (-3273)
+/** The disk has a cache attached already. */
+#define VERR_VD_CACHE_ALREADY_EXISTS (-3274)
+/** There is no cache attached to the disk. */
+#define VERR_VD_CACHE_NOT_FOUND (-3275)
+/** The cache is not up to date with the image. */
+#define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276)
+/** The given range does not meet the required alignment. */
+#define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277)
+/** The discard operation is not supported for this image. */
+#define VERR_VD_DISCARD_NOT_SUPPORTED (-3278)
+/** The image is the correct format but is corrupted. */
+#define VERR_VD_IMAGE_CORRUPTED (-3279)
+/** Repairing the image is not supported. */
+#define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280)
+/** Repairing the image is not possible because the corruption is to severe. */
+#define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281)
+/** Reading from the image was not possible because the offset is out of the image range.
+ * This usually indicates that there is a minor corruption in the image meta data. */
+#define VERR_VD_READ_OUT_OF_RANGE (-3282)
+/** Block read was marked as free in the image and returned as a zero block. */
+#define VINF_VD_NEW_ZEROED_BLOCK 3283
+/** Unable to parse the XML in DMG file. */
+#define VERR_VD_DMG_XML_PARSE_ERROR (-3284)
+/** Unable to locate a usable DMG file within the XAR archive. */
+#define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285)
+/** The size of the raw image is not dividable by 512 */
+#define VERR_VD_RAW_SIZE_MODULO_512 (-3286)
+/** The size of the raw image is not dividable by 2048 */
+#define VERR_VD_RAW_SIZE_MODULO_2048 (-3287)
+/** The size of the raw optical image is too small (<= 32K) */
+#define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288)
+/** The size of the raw floppy image is too big (>2.88MB) */
+#define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289)
+/** Reducing the size is not supported */
+#define VERR_VD_SHRINK_NOT_SUPPORTED (-3290)
+/** @} */
+
+
+/** @name VBox Guest Library (VBGL) Status Codes
+ * @{
+ */
+/** Library was not initialized. */
+#define VERR_VBGL_NOT_INITIALIZED (-3300)
+/** Virtual address was not allocated by the library. */
+#define VERR_VBGL_INVALID_ADDR (-3301)
+/** IOCtl to VBoxGuest driver failed. */
+#define VERR_VBGL_IOCTL_FAILED (-3302)
+/** @} */
+
+
+/** @name VBox USB (VUSB) Status Codes
+ * @{
+ */
+/** No available ports on the hub.
+ * This error is returned when a device is attempted created and/or attached
+ * to a hub which is out of ports. */
+#define VERR_VUSB_NO_PORTS (-3400)
+/** The requested operation cannot be performed on a detached USB device. */
+#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
+/** Failed to allocate memory for a URB. */
+#define VERR_VUSB_NO_URB_MEMORY (-3402)
+/** General failure during URB queuing.
+ * This will go away when the queueing gets proper status code handling. */
+#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
+/** Device creation failed because the USB device name was not found. */
+#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
+/** Not permitted to open the USB device.
+ * The user doesn't have access to the device in the usbfs, check the mount options. */
+#define VERR_VUSB_USBFS_PERMISSION (-3405)
+/** The requested operation cannot be performed because the device
+ * is currently being reset. */
+#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
+/** The requested operation cannot be performed because the device
+ * is currently suspended. */
+#define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407)
+/** Not permitted to open the USB device.
+ * The user doesn't have access to the device node, check group memberships. */
+#define VERR_VUSB_USB_DEVICE_PERMISSION (-3408)
+/** @} */
+
+
+/** @name VBox VGA Status Codes
+ * @{
+ */
+/** One of the custom modes was incorrect.
+ * The format or bit count of the custom mode value is invalid. */
+#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
+/** The display connector is resizing. */
+#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
+/** Unexpected PCI region change during VGA saved state loading. */
+#define VERR_VGA_UNEXPECTED_PCI_REGION_LOAD_CHANGE (-3502)
+/** Unabled to locate or load the OpenGL library. */
+#define VERR_VGA_GL_LOAD_FAILURE (-3503)
+/** Unabled to locate an OpenGL symbol. */
+#define VERR_VGA_GL_SYMBOL_NOT_FOUND (-3504)
+/** @} */
+
+
+/** @name Internal Networking Status Codes
+ * @{
+ */
+/** The networking interface to filter was not found. */
+#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
+/** The networking interface to filter was busy (used by someone). */
+#define VERR_INTNET_FLT_IF_BUSY (-3601)
+/** Failed to create or connect to a networking interface filter. */
+#define VERR_INTNET_FLT_IF_FAILED (-3602)
+/** The network already exists with a different trunk configuration. */
+#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
+/** The network already exists with a different security profile (restricted / public). */
+#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
+/** Failed to create a virtual network interface instance. */
+#define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605)
+/** Failed to retrieve a virtual network interface link ID. */
+#define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606)
+/** Failed to initialize a virtual network interface instance. */
+#define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607)
+/** Failed to open a virtual network interface instance. */
+#define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608)
+/** Failed to retrieve underlying (lower mac) link. */
+#define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609)
+/** Failed to open underlying link instance. */
+#define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610)
+/** Failed to get underlying link ID. */
+#define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611)
+/** @} */
+
+
+/** @name Support Driver Status Codes
+ * @{
+ */
+/** The component factory was not found. */
+#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
+/** The component factories do not support the requested interface. */
+#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
+/** The service module was not found. */
+#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
+/** The host kernel is too old. */
+#define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703)
+/** Bad VTG magic value. */
+#define VERR_SUPDRV_VTG_MAGIC (-3704)
+/** Bad VTG bit count value. */
+#define VERR_SUPDRV_VTG_BITS (-3705)
+/** Bad VTG header - misc. */
+#define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706)
+/** Bad VTG header - offset. */
+#define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707)
+/** Bad VTG header - offset. */
+#define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708)
+/** Bad VTG header - to low value. */
+#define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709)
+/** Bad VTG header - to high value. */
+#define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710)
+/** Bad VTG header - size value is not a multiple of the structure size. */
+#define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711)
+/** Bad VTG string table offset. */
+#define VERR_SUPDRV_VTG_STRTAB_OFF (-3712)
+/** Bad VTG string. */
+#define VERR_SUPDRV_VTG_BAD_STRING (-3713)
+/** VTG string is too long. */
+#define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714)
+/** Bad VTG attribute value. */
+#define VERR_SUPDRV_VTG_BAD_ATTR (-3715)
+/** Bad VTG provider descriptor. */
+#define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716)
+/** Bad VTG probe descriptor. */
+#define VERR_SUPDRV_VTG_BAD_PROBE (-3717)
+/** Bad VTG argument list descriptor. */
+#define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718)
+/** Bad VTG probe enabled data. */
+#define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719)
+/** Bad VTG probe location record. */
+#define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720)
+/** The VTG object for the session or image has already been registered. */
+#define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721)
+/** A driver may only register one VTG object per session. */
+#define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722)
+/** A tracer has already been registered. */
+#define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723)
+/** The session has no tracer associated with it. */
+#define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724)
+/** The tracer has already been opened in this sesssion. */
+#define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725)
+/** The tracer has not been opened. */
+#define VERR_SUPDRV_TRACER_NOT_OPENED (-3726)
+/** There is no tracer present. */
+#define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727)
+/** The tracer is unloading. */
+#define VERR_SUPDRV_TRACER_UNLOADING (-3728)
+/** Another thread in the session is talking to the tracer. */
+#define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729)
+/** The tracer cannot open it self in the same session. */
+#define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730)
+/** Bad argument flags. */
+#define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731)
+/** The session has reached the max number of (user mode) providers. */
+#define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732)
+/** The tracepoint provider object is too large. */
+#define VERR_SUPDRV_TRACER_TOO_LARGE (-3733)
+/** The probe location array isn't adjacent to the probe enable array. */
+#define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734)
+/** The user mode tracepoint provider has too many probe locations and
+ * probes. */
+#define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735)
+/** The user mode tracepoint provider string table is too large. */
+#define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736)
+/** The user mode tracepoint provider string table offset is bad. */
+#define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737)
+/** The VM process was denied access to vboxdrv because someone have managed to
+ * open the process or its main thread with too broad access rights. */
+#define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738)
+/** Error opening the ApiPort LPC object. */
+#define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739)
+/** Error enumerating all processes in the session. */
+#define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740)
+/** The CSRSS instance associated with the client process could not be
+ * located. */
+#define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741)
+/** Type error opening the ApiPort LPC object. */
+#define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742)
+/** Failed to measure the TSC delta between two CPUs. */
+#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743)
+/** Failed to calculate the TSC frequency. */
+#define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744)
+/** Failed to get the delta-adjusted TSC value. */
+#define VERR_SUPDRV_TSC_READ_FAILED (-3745)
+/** Failed to measure the TSC delta between two CPUs, continue without any
+ * TSC-delta. */
+#define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746
+/** A TSC-delta measurement request is currently being serviced. */
+#define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747)
+/** The process trying to open VBoxDrv is not a budding VM process (1). */
+#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748)
+/** The process trying to open VBoxDrv is not a budding VM process (2). */
+#define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749)
+
+/** Raw-mode is unavailable courtesy of Hyper-V. */
+#define VERR_SUPDRV_NO_RAW_MODE_HYPER_V_ROOT (-7000)
+/** @} */
+
+
+/** @name Support Library Status Codes
+ * @{
+ */
+/** The specified path was not absolute (hardening). */
+#define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750)
+/** The specified path was not clean (hardening). */
+#define VERR_SUPLIB_PATH_NOT_CLEAN (-3751)
+/** The specified path is too long (hardening). */
+#define VERR_SUPLIB_PATH_TOO_LONG (-3752)
+/** The specified path is too short (hardening). */
+#define VERR_SUPLIB_PATH_TOO_SHORT (-3753)
+/** The specified path has too many components (hardening). */
+#define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754)
+/** The specified path is a root path (hardening). */
+#define VERR_SUPLIB_PATH_IS_ROOT (-3755)
+/** Failed to enumerate directory (hardening). */
+#define VERR_SUPLIB_DIR_ENUM_FAILED (-3756)
+/** Failed to stat a file/dir during enumeration (hardening). */
+#define VERR_SUPLIB_STAT_ENUM_FAILED (-3757)
+/** Failed to stat a file/dir (hardening). */
+#define VERR_SUPLIB_STAT_FAILED (-3758)
+/** Failed to fstat a native handle (hardening). */
+#define VERR_SUPLIB_FSTAT_FAILED (-3759)
+/** Found an illegal symbolic link (hardening). */
+#define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760)
+/** Found something which isn't a file nor a directory (hardening). */
+#define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761)
+/** The specified path is a directory and not a file (hardening). */
+#define VERR_SUPLIB_IS_DIRECTORY (-3762)
+/** The specified path is a file and not a directory (hardening). */
+#define VERR_SUPLIB_IS_FILE (-3763)
+/** The path is not the same object as the native handle (hardening). */
+#define VERR_SUPLIB_NOT_SAME_OBJECT (-3764)
+/** The owner is not root (hardening). */
+#define VERR_SUPLIB_OWNER_NOT_ROOT (-3765)
+/** The group is a non-system group and it has write access (hardening). */
+#define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766)
+/** The file or directory is world writable (hardening). */
+#define VERR_SUPLIB_WORLD_WRITABLE (-3767)
+/** The argv[0] of an internal application does not match the executable image
+ * path (hardening). */
+#define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768)
+/** The internal application does not reside in the correct place (hardening). */
+#define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769)
+/** Unable to establish trusted of VM process (0). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770)
+/** Unable to establish trusted of VM process (1). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771)
+/** Unable to establish trusted of VM process (2). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772)
+/** Unable to establish trusted of VM process (3). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773)
+/** Unable to establish trusted of VM process (4). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774)
+/** Unable to establish trusted of VM process (5). */
+#define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775)
+/** Unable to make text memory writeable (hardening). */
+#define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776)
+/** Unable to seal text memory again to protect against write access (hardening). */
+#define VERR_SUPLIB_TEXT_NOT_SEALED (-3777)
+/** Unexpected instruction encountered for which there is no patch strategy
+ * implemented (hardening). */
+#define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778)
+/** @} */
+
+
+/** @name VBox GMM Status Codes
+ * @{
+ */
+/** The GMM is out of pages and needs to be give another chunk of user memory that
+ * it can lock down and borrow pages from. */
+#define VERR_GMM_SEED_ME (-3800)
+/** Unable to allocate more pages from the host system. */
+#define VERR_GMM_OUT_OF_MEMORY (-3801)
+/** Hit the global allocation limit.
+ * If you know there is still sufficient memory available, try raising the limit. */
+#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
+/** Hit the a VM account limit. */
+#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
+/** Attempt to free more memory than what was previously allocated. */
+#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
+/** Attempted to report too many pages as deflated. */
+#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
+/** The page to be freed or updated was not found. */
+#define VERR_GMM_PAGE_NOT_FOUND (-3806)
+/** The specified shared page was not actually private. */
+#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
+/** The specified shared page was not actually shared. */
+#define VERR_GMM_PAGE_NOT_SHARED (-3808)
+/** The page to be freed was already freed. */
+#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
+/** The page to be updated or freed was noted owned by the caller. */
+#define VERR_GMM_NOT_PAGE_OWNER (-3810)
+/** The specified chunk was not found. */
+#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
+/** The chunk has already been mapped into the process. */
+#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
+/** The chunk to be unmapped isn't actually mapped into the process. */
+#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
+/** The chunk has been mapped too many times already (impossible). */
+#define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814)
+/** The reservation or reservation update was declined - too many VMs, too
+ * little memory, and/or too low GMM configuration. */
+#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815)
+/** A GMM sanity check failed. */
+#define VERR_GMM_IS_NOT_SANE (-3816)
+/** Inserting a new chunk failed. */
+#define VERR_GMM_CHUNK_INSERT (-3817)
+/** Failed to obtain the GMM instance. */
+#define VERR_GMM_INSTANCE (-3818)
+/** Bad mutex semaphore flags. */
+#define VERR_GMM_MTX_FLAGS (-3819)
+/** Internal processing error in the page allocator. */
+#define VERR_GMM_ALLOC_PAGES_IPE (-3820)
+/** Invalid page count given to GMMR3FreePagesPerform. */
+#define VERR_GMM_ACTUAL_PAGES_IPE (-3821)
+/** The shared module name is too long. */
+#define VERR_GMM_MODULE_NAME_TOO_LONG (-3822)
+/** The shared module version string is too long. */
+#define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823)
+/** The shared module has too many regions. */
+#define VERR_GMM_TOO_MANY_REGIONS (-3824)
+/** The guest has reported too many modules. */
+#define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825)
+/** The guest has reported too many modules. */
+#define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826)
+/** The shared module is already registered. */
+#define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827)
+/** The shared module clashed address wise with a previously registered
+ * module. */
+#define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828)
+/** The shared module was not found. */
+#define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829)
+/** The size of the shared module was out of range. */
+#define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830)
+/** The size of the one or more regions in the shared module was out of
+ * range. */
+#define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831)
+/** @} */
+
+
+/** @name VBox GVM Status Codes
+ * @{
+ */
+/** The GVM is out of VM handle space. */
+#define VERR_GVM_TOO_MANY_VMS (-3900)
+/** The EMT was not blocked at the time of the call. */
+#define VINF_GVM_NOT_BLOCKED 3901
+/** The EMT was not busy running guest code at the time of the call. */
+#define VINF_GVM_NOT_BUSY_IN_GC 3902
+/** RTThreadYield was called during a GVMMR0SchedPoll call. */
+#define VINF_GVM_YIELDED 3903
+/** @} */
+
+
+/** @name VBox VMX Status Codes
+ * @{
+ */
+/** VMXON failed; possibly because it was already run before. */
+#define VERR_VMX_VMXON_FAILED (-4000)
+/** Invalid VMCS pointer.
+ * (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */
+#define VERR_VMX_INVALID_VMCS_PTR (-4001)
+/** Invalid VMCS index or write to read-only element. */
+#define VERR_VMX_INVALID_VMCS_FIELD (-4002)
+/** Reserved for future status code that we wish to OR with
+ * VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */
+#define VERR_VMX_RESERVED (-4003)
+/** Invalid VMXON pointer. */
+#define VERR_VMX_INVALID_VMXON_PTR (-4004)
+/** Unable to start VM execution. */
+#define VERR_VMX_UNABLE_TO_START_VM (-4005)
+/** Unable to switch due to invalid host state. */
+#define VERR_VMX_INVALID_HOST_STATE (-4006)
+/** VMX CPU extension not available in hardware. */
+#define VERR_VMX_NO_VMX (-4009)
+/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
+#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
+/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
+#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
+/** Failed to enable and lock VT-x features. */
+#define VERR_VMX_MSR_LOCKING_FAILED (-4013)
+/** Unable to switch due to invalid guest state. */
+#define VERR_VMX_INVALID_GUEST_STATE (-4014)
+/** Unexpected VM exit. */
+#define VERR_VMX_UNEXPECTED_EXIT (-4015)
+/** Unexpected VM exception. */
+#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
+/** Unexpected interruption exit type. */
+#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017)
+/** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */
+#define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018)
+/** Undefined VM exit code. */
+#define VERR_VMX_UNDEFINED_EXIT_CODE (-4019)
+/** VMPTRLD failed; possibly because of invalid VMCS launch-state. */
+#define VERR_VMX_VMPTRLD_FAILED (-4021)
+/** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */
+#define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022)
+/** Internal VMX processing error no 1. */
+#define VERR_VMX_IPE_1 (-4023)
+/** Internal VMX processing error no 2. */
+#define VERR_VMX_IPE_2 (-4024)
+/** Internal VMX processing error no 3. */
+#define VERR_VMX_IPE_3 (-4025)
+/** Internal VMX processing error no 4. */
+#define VERR_VMX_IPE_4 (-4026)
+/** Internal VMX processing error no 5. */
+#define VERR_VMX_IPE_5 (-4027)
+/** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */
+#define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028)
+/** VT-x features disabled by the BIOS. */
+#define VERR_VMX_MSR_VMX_DISABLED (-4029)
+/** VT-x VMCS field cache invalid. */
+#define VERR_VMX_VMCS_FIELD_CACHE_INVALID (-4030)
+/** Failed to set VMXON enable bit while enabling VT-x through the MSR. */
+#define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4031)
+/** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */
+#define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4032)
+/** An operation caused a nested-guest VM-exit. */
+#define VINF_VMX_VMEXIT 4033
+/** Generic VM-entry failure. */
+#define VERR_VMX_VMENTRY_FAILED (-4033)
+/** Generic VM-exit failure. */
+#define VERR_VMX_VMEXIT_FAILED (-4034)
+/** The requested nested-guest VMX intercept is not active or not in
+ * nested-guest execution mode. */
+#define VINF_VMX_INTERCEPT_NOT_ACTIVE 4035
+/** The behavior of the instruction/operation is modified/needs modification
+ * in VMX non-root mode. */
+#define VINF_VMX_MODIFIES_BEHAVIOR 4036
+/** VMLAUNCH/VMRESUME succeeded, can enter nested-guest execution. */
+#define VINF_VMX_VMLAUNCH_VMRESUME 4037
+/** VT-x VMCS launch state invalid. */
+#define VERR_VMX_INVALID_VMCS_LAUNCH_STATE (-4038)
+/** @} */
+
+
+/** @name VBox SVM Status Codes
+ * @{
+ */
+/** Unable to start VM execution. */
+#define VERR_SVM_UNABLE_TO_START_VM (-4050)
+/** AMD-V bit not set in K6_EFER MSR */
+#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
+/** AMD-V CPU extension not available. */
+#define VERR_SVM_NO_SVM (-4052)
+/** AMD-V CPU extension disabled (by BIOS). */
+#define VERR_SVM_DISABLED (-4053)
+/** AMD-V CPU extension in-use. */
+#define VERR_SVM_IN_USE (-4054)
+/** Invalid pVMCB. */
+#define VERR_SVM_INVALID_PVMCB (-4055)
+/** Unexpected SVM exit. */
+#define VERR_SVM_UNEXPECTED_EXIT (-4056)
+/** Unexpected SVM exception exit. */
+#define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057)
+/** Unexpected SVM patch type. */
+#define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058)
+/** Unable to start VM execution due to an invalid guest state. */
+#define VERR_SVM_INVALID_GUEST_STATE (-4059)
+/** Unknown or unrecognized SVM exit. */
+#define VERR_SVM_UNKNOWN_EXIT (-4060)
+/** Internal SVM processing error no 1. */
+#define VERR_SVM_IPE_1 (-4061)
+/** Internal SVM processing error no 2. */
+#define VERR_SVM_IPE_2 (-4062)
+/** Internal SVM processing error no 3. */
+#define VERR_SVM_IPE_3 (-4063)
+/** Internal SVM processing error no 4. */
+#define VERR_SVM_IPE_4 (-4064)
+/** Internal SVM processing error no 5. */
+#define VERR_SVM_IPE_5 (-4065)
+/** The nested-guest \#VMEXIT processing failed, initiate shutdown. */
+#define VERR_SVM_VMEXIT_FAILED (-4066)
+/** An operation caused a nested-guest SVM \#VMEXIT. */
+#define VINF_SVM_VMEXIT 4067
+/** VMRUN emulation succeeded, ready to immediately enter the nested-guest. */
+#define VINF_SVM_VMRUN 4068
+/** The requested nested-guest SVM intercept is not active or not in
+ * nested-guest execution mode. */
+#define VINF_SVM_INTERCEPT_NOT_ACTIVE 4069
+/** @} */
+
+
+/** @name VBox HM Status Codes
+ * @{
+ */
+/** Host is about to go into suspend mode. */
+#define VERR_HM_SUSPEND_PENDING (-4100)
+/** Conflicting CFGM values. */
+#define VERR_HM_CONFIG_MISMATCH (-4103)
+/** Internal processing error in the HM init code. */
+#define VERR_HM_ALREADY_ENABLED_IPE (-4104)
+/** Unexpected MSR in the auto-load/store area. */
+#define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105)
+/** No 32-bit to 64-bit switcher in place. */
+#define VERR_HM_NO_32_TO_64_SWITCHER (-4106)
+/** HMR0Leave was called on the wrong CPU. */
+#define VERR_HM_WRONG_CPU (-4107)
+/** Internal processing error \#1 in the HM code. */
+#define VERR_HM_IPE_1 (-4108)
+/** Internal processing error \#2 in the HM code. */
+#define VERR_HM_IPE_2 (-4109)
+/** Wrong 32/64-bit switcher. */
+#define VERR_HM_WRONG_SWITCHER (-4110)
+/** Unknown I/O instruction. */
+#define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111)
+/** Unsupported CPU feature combination. */
+#define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112)
+/** Internal processing error \#3 in the HM code. */
+#define VERR_HM_IPE_3 (-4113)
+/** Internal processing error \#4 in the HM code. */
+#define VERR_HM_IPE_4 (-4114)
+/** Internal processing error \#5 in the HM code. */
+#define VERR_HM_IPE_5 (-4115)
+/** Invalid HM64ON32OP value. */
+#define VERR_HM_INVALID_HM64ON32OP (-4116)
+/** Resume guest execution after injecting a double-fault. */
+#define VINF_HM_DOUBLE_FAULT 4117
+/** Pending exception; continue guest execution. */
+#define VINF_HM_PENDING_XCPT 4118
+/** @} */
+
+
+/** @name VBox Disassembler Status Codes
+ * @{
+ */
+/** Invalid opcode byte(s) */
+#define VERR_DIS_INVALID_OPCODE (-4200)
+/** Generic failure during disassembly. */
+#define VERR_DIS_GEN_FAILURE (-4201)
+/** No read callback. */
+#define VERR_DIS_NO_READ_CALLBACK (-4202)
+/** Invalid Mod/RM. */
+#define VERR_DIS_INVALID_MODRM (-4203)
+/** Invalid parameter index. */
+#define VERR_DIS_INVALID_PARAMETER (-4204)
+/** The instruction is too long. */
+#define VERR_DIS_TOO_LONG_INSTR (-4206)
+/** @} */
+
+
+/** @name VBox Webservice Status Codes
+ * @{
+ */
+/** Authentication failed (ISessionManager::logon()) */
+#define VERR_WEB_NOT_AUTHENTICATED (-4300)
+/** Invalid format of managed object reference */
+#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
+/** Invalid session ID in managed object reference */
+#define VERR_WEB_INVALID_SESSION_ID (-4302)
+/** Invalid object ID in managed object reference */
+#define VERR_WEB_INVALID_OBJECT_ID (-4303)
+/** Unsupported interface for managed object reference */
+#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
+/** @} */
+
+
+/** @name VBox PARAV Status Codes
+ * @{
+ */
+/** Switch back to host */
+#define VINF_PARAV_SWITCH_TO_HOST 4400
+
+/** @} */
+
+/** @name VBox Video HW Acceleration command status
+ * @{
+ */
+/** command processing is pending, a completion handler will be called */
+#define VINF_VHWA_CMD_PENDING 4500
+
+/** @} */
+
+
+/** @name VBox COM error codes
+ *
+ * @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses
+ * these for conversion that is lossless with respect to important COM
+ * status codes. These methods should be moved to the glue library.
+ * @{ */
+/** Unexpected turn of events. */
+#define VERR_COM_UNEXPECTED (-4600)
+/** The base of the VirtualBox COM status codes (the lower value)
+ * corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */
+#define VERR_COM_VBOX_LOWEST (-4699)
+/** Object corresponding to the supplied arguments does not exist. */
+#define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1)
+/** Current virtual machine state prevents the operation. */
+#define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2)
+/** Virtual machine error occurred attempting the operation. */
+#define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3)
+/** File not accessible or erroneous file contents. */
+#define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4)
+/** IPRT error. */
+#define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5)
+/** Pluggable Device Manager error. */
+#define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6)
+/** Current object state prohibits operation. */
+#define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7)
+/** Host operating system related error. */
+#define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8)
+/** Requested operation is not supported. */
+#define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9)
+/** Invalid XML found. */
+#define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10)
+/** Current session state prohibits operation. */
+#define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11)
+/** Object being in use prohibits operation. */
+#define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12)
+/** Returned by callback methods which does not need to be called
+ * again because the client does not actually make use of them. */
+#define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13)
+/** @} */
+
+/** @name VBox VMMDev Status codes
+ * @{
+ */
+/** CPU hotplug events from VMMDev are not monitored by the guest. */
+#define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700)
+/** @} */
+
+/** @name VBox async I/O manager Status Codes
+ * @{
+ */
+/** Async I/O task is pending, a completion handler will be called. */
+#define VINF_AIO_TASK_PENDING 4800
+/** @} */
+
+/** @name VBox Virtual SCSI Status Codes
+ * @{
+ */
+/** LUN type is not supported. */
+#define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900)
+/** LUN is already/still attached to a device. */
+#define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901)
+/** The specified LUN is invalid. */
+#define VERR_VSCSI_LUN_INVALID (-4902)
+/** The LUN is not attached to the device. */
+#define VERR_VSCSI_LUN_NOT_ATTACHED (-4903)
+/** The LUN is still busy. */
+#define VERR_VSCSI_LUN_BUSY (-4904)
+/** @} */
+
+/** @name VBox FAM Status Codes
+ * @{
+ */
+/** FAM failed to open a connection. */
+#define VERR_FAM_OPEN_FAILED (-5000)
+/** FAM failed to add a file to the list to be monitored. */
+#define VERR_FAM_MONITOR_FILE_FAILED (-5001)
+/** FAM failed to add a directory to the list to be monitored. */
+#define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002)
+/** The connection to the FAM daemon was lost. */
+#define VERR_FAM_CONNECTION_LOST (-5003)
+/** @} */
+
+
+/** @name PCI Bus & Passthrough Status Codes
+ * @{
+ */
+/** RamPreAlloc not set.
+ * RAM pre-allocation is currently a requirement for PCI passthrough. */
+#define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100)
+/** VT-x/AMD-V not active.
+ * PCI passthrough currently works only if VT-x/AMD-V is active. */
+#define VERR_PCI_PASSTHROUGH_NO_HM (-5101)
+/** Nested paging not active.
+ * PCI passthrough currently works only if nested paging is active. */
+#define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102)
+
+/** Special return code from a PCI I/O region mapping handler that tells the BUS
+ * that it has done the mapping already. */
+#define VINF_PCI_MAPPING_DONE 5150
+/** @} */
+
+
+/** @name GVMM Status Codes
+ * @{
+ */
+/** Internal error obtaining the GVMM instance. */
+#define VERR_GVMM_INSTANCE (-5200)
+/** GVMM does not support the range of CPUs present/possible on the host. */
+#define VERR_GVMM_HOST_CPU_RANGE (-5201)
+/** GVMM ran into some broken IPRT code. */
+#define VERR_GVMM_BROKEN_IPRT (-5202)
+/** Internal processing error \#1 in the GVMM code. */
+#define VERR_GVMM_IPE_1 (-5203)
+/** Internal processing error \#2 in the GVMM code. */
+#define VERR_GVMM_IPE_2 (-5204)
+/** Cannot destroy VM because not all other EMTs have deregistered. */
+#define VERR_GVMM_NOT_ALL_EMTS_DEREGISTERED (-5205)
+/** @} */
+
+
+/** @name IEM Status Codes
+ * @{ */
+/** The instruction is not yet implemented by IEM. */
+#define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300)
+/** Invalid operand size passed to an IEM function. */
+#define VERR_IEM_INVALID_OPERAND_SIZE (-5301)
+/** Invalid address mode passed to an IEM function. */
+#define VERR_IEM_INVALID_ADDRESS_MODE (-5302)
+/** Invalid effective segment register number passed to an IEM function. */
+#define VERR_IEM_INVALID_EFF_SEG (-5303)
+/** Invalid instruction length passed to an IEM function. */
+#define VERR_IEM_INVALID_INSTR_LENGTH (-5304)
+/** Internal status code for indicating that a selector isn't valid (LAR, LSL,
+ * VERR, VERW). This is not used outside the instruction implementations. */
+#define VINF_IEM_SELECTOR_NOT_OK (5305)
+/** Restart the current instruction. For testing only. */
+#define VERR_IEM_RESTART_INSTRUCTION (-5389)
+/** This particular aspect of the instruction is not yet implemented by IEM. */
+#define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390)
+/** Internal processing error \#1 in the IEM code. */
+#define VERR_IEM_IPE_1 (-5391)
+/** Internal processing error \#2 in the IEM code. */
+#define VERR_IEM_IPE_2 (-5392)
+/** Internal processing error \#3 in the IEM code. */
+#define VERR_IEM_IPE_3 (-5393)
+/** Internal processing error \#4 in the IEM code. */
+#define VERR_IEM_IPE_4 (-5394)
+/** Internal processing error \#5 in the IEM code. */
+#define VERR_IEM_IPE_5 (-5395)
+/** Internal processing error \#6 in the IEM code. */
+#define VERR_IEM_IPE_6 (-5396)
+/** Internal processing error \#7 in the IEM code. */
+#define VERR_IEM_IPE_7 (-5397)
+/** Internal processing error \#8 in the IEM code. */
+#define VERR_IEM_IPE_8 (-5398)
+/** Internal processing error \#9 in the IEM code. */
+#define VERR_IEM_IPE_9 (-5399)
+/** @} */
+
+
+/** @name DBGC Status Codes
+ * @{ */
+/** Status that causes DBGC to quit. */
+#define VERR_DBGC_QUIT (-5400)
+/** Async command pending. */
+#define VWRN_DBGC_CMD_PENDING 5401
+/** The command has already been registered. */
+#define VWRN_DBGC_ALREADY_REGISTERED 5402
+/** The command cannot be deregistered because has not been registered. */
+#define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403)
+/** Unknown breakpoint. */
+#define VERR_DBGC_BP_NOT_FOUND (-5404)
+/** The breakpoint already exists. */
+#define VERR_DBGC_BP_EXISTS (-5405)
+/** The breakpoint has no command. */
+#define VINF_DBGC_BP_NO_COMMAND 5406
+/** Generic debugger command failure. */
+#define VERR_DBGC_COMMAND_FAILED (-5407)
+/** Logic bug in the DBGC code. */
+#define VERR_DBGC_IPE (-5408)
+
+/** The lowest parse status code. */
+#define VERR_DBGC_PARSE_LOWEST (-5499)
+/** Syntax error - too few arguments. */
+#define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0)
+/** Syntax error - too many arguments. */
+#define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1)
+/** Syntax error - too many arguments for static storage. */
+#define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2)
+/** Syntax error - expected binary operator. */
+#define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3)
+
+/** Syntax error - the argument does not allow a range to be specified. */
+#define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5)
+/** Syntax error - unbalanced quotes. */
+#define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6)
+/** Syntax error - unbalanced parenthesis. */
+#define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7)
+/** Syntax error - an argument or subargument contains nothing useful. */
+#define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8)
+/** Syntax error - invalid operator usage. */
+#define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9)
+/** Syntax error - invalid numeric value. */
+#define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10)
+/** Syntax error - numeric overflow. */
+#define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11)
+/** Syntax error - invalid operation attempted. */
+#define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12)
+/** Syntax error - function not found. */
+#define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13)
+/** Syntax error - the specified function is not a function. */
+#define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14)
+/** Syntax error - out of scratch memory. */
+#define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15)
+/** Syntax error - out of regular heap memory. */
+#define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16)
+/** Syntax error - incorrect argument type. */
+#define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17)
+/** Syntax error - an undefined variable was referenced. */
+#define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18)
+/** Syntax error - a type conversion failed. */
+#define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19)
+/** Syntax error - you hit a debugger feature which isn't implemented yet.
+ * (Feel free to help implement it.) */
+#define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20)
+/** Syntax error - Couldn't satisfy a request for a specific result type. */
+#define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21)
+/** Syntax error - Cannot read symbol value, it is a set-only symbol. */
+#define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22)
+/** Syntax error - Invalid command name. */
+#define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23)
+/** Syntax error - Command not found. */
+#define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24)
+/** Syntax error - buggy parser. */
+#define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25)
+/** @} */
+
+
+/** @name Support driver/library shared verification status codes.
+ * @{ */
+/** Process Verification Failure: The memory content does not match the image
+ * file. */
+#define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600)
+/** Process Verification Failure: The memory protection of a image file section
+ * does not match what the section header prescribes. */
+#define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601)
+/** Process Verification Failure: One of the section in the image file is not
+ * mapped into memory. */
+#define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602)
+/** Process Verification Failure: One of the section in the image file is not
+ * fully mapped into memory. */
+#define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603)
+/** Process Verification Failure: Bad file alignment value in image header. */
+#define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604)
+/** Process Verification Failure: Bad image base in header. */
+#define VERR_SUP_VP_BAD_IMAGE_BASE (-5605)
+/** Process Verification Failure: Bad image signature. */
+#define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606)
+/** Process Verification Failure: Bad image size. */
+#define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607)
+/** Process Verification Failure: Bad new-header offset in the MZ header. */
+#define VERR_SUP_VP_BAD_MZ_OFFSET (-5608)
+/** Process Verification Failure: Bad optional header field. */
+#define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609)
+/** Process Verification Failure: Bad section alignment value in image
+ * header. */
+#define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610)
+/** Process Verification Failure: Bad section raw data size. */
+#define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611)
+/** Process Verification Failure: Bad virtual section address. */
+#define VERR_SUP_VP_BAD_SECTION_RVA (-5612)
+/** Process Verification Failure: Bad virtual section size. */
+#define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613)
+/** Process Verification Failure: Bad size of image header. */
+#define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614)
+/** Process Verification Failure: The process is being debugged. */
+#define VERR_SUP_VP_DEBUGGED (-5615)
+/** Process Verification Failure: A DLL was found more than once. */
+#define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616)
+/** Process Verification Failure: Image section region is too large. */
+#define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617)
+/** Process Verification Failure: Executable file name and process image name
+ * does not match up. */
+#define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618)
+/** Process Verification Failure: Found executable memory allocated in the
+ * process. There is only supposed be executable memory associated with
+ * image file mappings (DLLs & EXE). */
+#define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619)
+/** Process Verification Failure: There is more than one known executable mapped
+ * into the process. */
+#define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620)
+/** Process Verification Failure: Error closing image file handle. */
+#define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621)
+/** Process Verification Failure: Error opening image file. */
+#define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622)
+/** Process Verification Failure: Error reading image file header. */
+#define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623)
+/** Process Verification Failure: Image mapping is bogus as the first region
+ * has different AllocationBase and BaseAddress values, indicating that a
+ * section was unmapped or otherwise tampered with. */
+#define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624)
+/** Process Verification Failure: Error reading process memory for comparing
+ * with disk data. */
+#define VERR_SUP_VP_MEMORY_READ_ERROR (-5625)
+/** Process Verification Failure: Found no executable mapped into the process
+ * address space. */
+#define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626)
+/** Process Verification Failure: An image mapping failed to report a name. */
+#define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627)
+/** Process Verification Failure: No KERNE32.DLL mapping found. This is
+ * impossible. */
+#define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628)
+/** Process Verification Failure: Error allocating memory. */
+#define VERR_SUP_VP_NO_MEMORY (-5629)
+/** Process Verification Failure: Error allocating state memory or querying
+ * the system32 path. */
+#define VERR_SUP_VP_NO_MEMORY_STATE (-5630)
+/** Process Verification Failure: No NTDLL.DLL mapping found. This is
+ * impossible. */
+#define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631)
+/** Process Verification Failure: A DLL residing outside System32 was found
+ * in the process. */
+#define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632)
+/** Process Verification Failure: An unknown and unwanted DLL was found loaded
+ * into the process. */
+#define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633)
+/** Process Verification Failure: The name of an image file changes between
+ * mapping regions. */
+#define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634)
+/** Process Verification Failure: Error querying process name. */
+#define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635)
+/** Process Verification Failure: Error querying thread information. */
+#define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636)
+/** Process Verification Failure: Error query virtual memory information. */
+#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637)
+/** Process Verification Failure: Error query virtual memory mapping name. */
+#define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638)
+/** Process Verification Failure: Error determining the full path of
+ * System32. */
+#define VERR_SUP_VP_SYSTEM32_PATH (-5639)
+/** Process Verification Failure: The process has more than one thread. */
+#define VERR_SUP_VP_THREAD_NOT_ALONE (-5640)
+/** Process Verification Failure: The image mapping is too large (>= 2GB). */
+#define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641)
+/** Process Verification Failure: The memory region is too large (>= 2GB). */
+#define VERR_SUP_VP_TOO_LARGE_REGION (-5642)
+/** Process Verification Failure: There are too many DLLs loaded. */
+#define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643)
+/** Process Verification Failure: An image has too many regions. */
+#define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644)
+/** Process Verification Failure: The process has too many virtual memory
+ * regions. */
+#define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645)
+/** Process Verification Failure: An image has too many sections. */
+#define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646)
+/** Process Verification Failure: An image is targeting an unexpected
+ * machine/CPU. */
+#define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647)
+/** Process Verification Failure: Unexpected section protection flag
+ * combination. */
+#define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648)
+/** Process Verification Failure: Expected the process and exe to have forced
+ * integrity checking enabled (verifying signatures). */
+#define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649)
+/** Process Verification Failure: Expected the process and exe to have dynamic
+ * base enabled. */
+#define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650)
+/** Process Verification Failure: Expected the process and exe to advertise
+ * NX compatibility. */
+#define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651)
+/** Process Verification Failure: The DllCharacteristics of the process
+ * does not match the value in the optional header in the exe file. */
+#define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652)
+/** Process Verification Failure: The ImageCharacteristics of the process
+ * does not match the value in the file header in the exe file. */
+#define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653)
+/** Process Verification Failure: Error querying image information. */
+#define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654)
+/** Process Verification Failure: Error querying debug port. */
+#define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655)
+/** WinVerifyTrust failed with an unexpected status code when using the
+ * catalog-file approach. */
+#define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656)
+/** The image is required to be signed with the same certificate as the rest
+ * of VirtualBox. */
+#define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657)
+/** Internal processing error: Not build certificate. */
+#define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658)
+/** The image requires to be signed using the kernel-code signing process. */
+#define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659)
+/** Unexpected number of valid paths. */
+#define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660)
+/** The image is required to force integrity checks. */
+#define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661)
+/** Process Verification Failure: Symantec Endpoint Protection must be
+ * disabled for the VirtualBox VM processes.
+ * http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */
+#define VERR_SUP_VP_SYSFER_DLL (-5662)
+/** Process Purification Failure: KERNE32.DLL already mapped into the initial
+ * process (suspended). */
+#define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663)
+/** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of
+ * executable memory which shouldn't be present in the process. */
+#define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664)
+/** Process Purification Failure: Both NtUnmapViewOfSetion and
+ * NtProtectVirtualMemory failed to get rid of or passify an non-image
+ * executable mapping. */
+#define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665)
+/** Process Purification Failure: Unknown memory type of executable memory. */
+#define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666)
+/** The image file is not owned by TrustedInstaller is it should be. */
+#define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667)
+/** The image is outside the expected range. */
+#define VERR_SUP_VP_IMAGE_TOO_BIG (-5668)
+/** Stub process not found so it cannot be revalidated when vboxdrv is opened
+ * by the VM process. */
+#define VERR_SUP_VP_STUB_NOT_FOUND (-5669)
+/** Error opening the stub process for revalidation when vboxdrv is opened by
+ * the VM process. */
+#define VERR_SUP_VP_STUB_OPEN_ERROR (-5670)
+/** Stub process thread not found during revalidation upon vboxdrv opening by
+ * the VM process. */
+#define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671)
+/** Error opening the stub process thread for revalidation when vboxdrv is
+ * opened by the VM process. */
+#define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672)
+/** Process Purification Failure: NtAllocateVirtualMemory failed to get us
+ * suitable replacement memory for a chunk of executable memory that
+ * shouldn't be present in our process. (You will only see this message if you
+ * got potentially fatally buggy anti-virus software installed.) */
+#define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673)
+/** Error getting the file mode. */
+#define VERR_SUP_VP_FILE_MODE_ERROR (-5674)
+/** Error creating an event semaphore for used with asynchronous reads. */
+#define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675)
+/** Undesirable module. */
+#define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676)
+
+/** @} */
+
+/** @name VBox Extension Pack Status Codes
+ * @{
+ */
+/** The host is not supported. Uninstall the extension pack.
+ * Returned by the VBOXEXTPACKREG::pfnInstalled. */
+#define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000)
+/** The VirtualBox version is not supported by one of the extension packs.
+ *
+ * You have probably upgraded VirtualBox recently. Please upgrade the
+ * extension packs to versions compatible with this VirtualBox release.
+ */
+#define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001)
+/** @} */
+
+
+/** @name VBox Guest Control Status Codes
+ * @{
+ */
+/** Guest side reported an error. */
+#define VERR_GSTCTL_GUEST_ERROR (-6200)
+/** A guest control object has changed its overall status. */
+#define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220
+/** Guest process is in a wrong state. */
+#define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221)
+/** Maximum (context ID) sessions have been reached. */
+#define VERR_GSTCTL_MAX_CID_SESSIONS_REACHED (-6222)
+/** Maximum (context ID) objects have been reached. */
+#define VERR_GSTCTL_MAX_CID_OBJECTS_REACHED (-6223)
+/** Maximum (context ID object) count has been reached. */
+#define VERR_GSTCTL_MAX_CID_COUNT_REACHED (-6224)
+/** Started guest process terminated with an exit code <> 0. */
+#define VERR_GSTCTL_PROCESS_EXIT_CODE (-6225)
+/** @} */
+
+
+/** @name GIM Status Codes
+ * @{
+ */
+/** No GIM provider is configured for this VM. */
+#define VERR_GIM_NOT_ENABLED (-6300)
+/** GIM internal processing error \#1. */
+#define VERR_GIM_IPE_1 (-6301)
+/** GIM internal processing error \#2. */
+#define VERR_GIM_IPE_2 (-6302)
+/** GIM internal processing error \#3. */
+#define VERR_GIM_IPE_3 (-6303)
+/** The GIM provider does not support any paravirtualized TSC. */
+#define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304)
+/** The guest has not setup use of the paravirtualized TSC. */
+#define VERR_GIM_PVTSC_NOT_ENABLED (-6305)
+/** Unknown or invalid GIM provider. */
+#define VERR_GIM_INVALID_PROVIDER (-6306)
+/** GIM generic operation failed. */
+#define VERR_GIM_OPERATION_FAILED (-6307)
+/** The GIM provider does not support any hypercalls. */
+#define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308)
+/** The guest has not setup use of the hypercalls. */
+#define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309)
+/** The GIM device is not registered with GIM when it ought to be. */
+#define VERR_GIM_DEVICE_NOT_REGISTERED (-6310)
+/** Hypercall cannot be enabled/performed due to access/permissions/CPL. */
+#define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311)
+/** Failed to read to a memory region while performing a hypercall. */
+#define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312)
+/** Failed to write to a memory region while performing a hypercall. */
+#define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313)
+/** Generic hypercall operation failure. */
+#define VERR_GIM_HYPERCALL_FAILED (-6314)
+/** No debug connection configured. */
+#define VERR_GIM_NO_DEBUG_CONNECTION (-6315)
+/** Return to ring-3 to perform the hypercall there. */
+#define VINF_GIM_R3_HYPERCALL 6316
+/** Continuing hypercall at the same RIP, continue guest execution. */
+#define VINF_GIM_HYPERCALL_CONTINUING 6317
+/** Instruction that triggers the hypercall is invalid/unrecognized. */
+#define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318)
+/** @} */
+
+
+/** @name Main API Status Codes
+ * @{
+ */
+/** The configuration constructor in main failed due to a COM error. Check
+ * the release log of the VM for further details. */
+#define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400)
+/** The configuration constructor in main failed due to an internal consistency
+ * error. Consult the release log of the VM for further details. */
+#define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401)
+/** @} */
+
+
+/** @name VBox Drag and Drop Status Codes
+ * @{
+ */
+/** Guest side reported an error. */
+#define VERR_GSTDND_GUEST_ERROR (-6500)
+/** @} */
+
+
+/** @name Audio Status Codes
+ * @{
+ */
+/** Host backend couldn't be initialized. Happen if the audio server is not
+ * reachable, audio hardware is not available or similar. We should use the
+ * NULL audio driver. */
+#define VERR_AUDIO_BACKEND_INIT_FAILED (-6600)
+/** No host backend attached / available. */
+#define VERR_AUDIO_BACKEND_NOT_ATTACHED (-6601)
+/** No free input streams. */
+#define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6602)
+/** No free output streams. */
+#define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6603)
+/** Pending stream disable operation in progress. */
+#define VERR_AUDIO_STREAM_PENDING_DISABLE (-6604)
+/** There is more data available.
+ * This can happen due to a buffer wraparound of a buffer read/write operation. */
+#define VINF_AUDIO_MORE_DATA_AVAILABLE (6605)
+/** Stream is not ready for requested operation. */
+#define VERR_AUDIO_STREAM_NOT_READY (-6605)
+/** Stream could not be created.
+ * This might due to missing host (backend) drivers or a host not having the
+ * required hardware, or that the requested stream configuration
+ * is not supported by the host backend. */
+#define VERR_AUDIO_STREAM_COULD_NOT_CREATE (-6606)
+/** @} */
+
+
+/** @name APIC Status Codes
+ * @{
+ */
+/** No pending interrupt. */
+#define VERR_APIC_INTR_NOT_PENDING (-6700)
+/** Pending interrupt is masked by TPR. */
+#define VERR_APIC_INTR_MASKED_BY_TPR (-6701)
+/** APIC did not accept the interrupt. */
+#define VERR_APIC_INTR_DISCARDED (-6702)
+/** @} */
+
+/** @name NEM Status Codes
+ * @{
+ */
+/** NEM is not enabled. */
+#define VERR_NEM_NOT_ENABLED (-6800)
+/** NEM is not available. */
+#define VERR_NEM_NOT_AVAILABLE (-6801)
+/** NEM init failed. */
+#define VERR_NEM_INIT_FAILED (-6802)
+/** NEM init failed because of missing kernel API (\#1). */
+#define VERR_NEM_MISSING_KERNEL_API_1 (-6803)
+/** NEM can only operate from ring-3. */
+#define VERR_NEM_RING3_ONLY (-6804)
+/** NEM failed to create a native VM instance. */
+#define VERR_NEM_VM_CREATE_FAILED (-6805)
+/** NEM failed to map page(s) into the VM. */
+#define VERR_NEM_MAP_PAGES_FAILED (-6806)
+/** NEM failed to unmap page(s) into the VM. */
+#define VERR_NEM_UNMAP_PAGES_FAILED (-6807)
+/** NEM failed to get registers. */
+#define VERR_NEM_GET_REGISTERS_FAILED (-6808)
+/** NEM failed to set registers. */
+#define VERR_NEM_SET_REGISTERS_FAILED (-6809)
+/** Get register caller must flush the TLB (not an error). */
+#define VERR_NEM_FLUSH_TLB (-6810)
+/** Get register caller must flush the TLB. */
+#define VINF_NEM_FLUSH_TLB (6810)
+/** NEM failed to set TSC. */
+#define VERR_NEM_SET_TSC (-6811)
+/** NEM init failed because of missing kernel API (\#2). */
+#define VERR_NEM_MISSING_KERNEL_API_2 (-6812)
+/** NEM init failed because of missing kernel API (\#3). */
+#define VERR_NEM_MISSING_KERNEL_API_3 (-6813)
+/** NEM init failed because of missing kernel API (\#4). */
+#define VERR_NEM_MISSING_KERNEL_API_4 (-6814)
+/** NEM init failed because of missing kernel API (\#5). */
+#define VERR_NEM_MISSING_KERNEL_API_5 (-6815)
+
+/** NEM internal processing error \#0. */
+#define VERR_NEM_IPE_0 (-6890)
+/** NEM internal processing error \#1. */
+#define VERR_NEM_IPE_1 (-6891)
+/** NEM internal processing error \#2. */
+#define VERR_NEM_IPE_2 (-6892)
+/** NEM internal processing error \#3. */
+#define VERR_NEM_IPE_3 (-6893)
+/** NEM internal processing error \#4. */
+#define VERR_NEM_IPE_4 (-6894)
+/** NEM internal processing error \#5. */
+#define VERR_NEM_IPE_5 (-6895)
+/** NEM internal processing error \#6. */
+#define VERR_NEM_IPE_6 (-6896)
+/** NEM internal processing error \#7. */
+#define VERR_NEM_IPE_7 (-6897)
+/** NEM internal processing error \#8. */
+#define VERR_NEM_IPE_8 (-6898)
+/** NEM internal processing error \#9. */
+#define VERR_NEM_IPE_9 (-6899)
+/** @} */
+
+/** @name Recording Status Codes
+ * @{
+ */
+/** Codec was not found. */
+#define VERR_RECORDING_CODEC_NOT_FOUND (-6900)
+/** Codec initialization failed. */
+#define VERR_RECORDING_CODEC_INIT_FAILED (-6902)
+/** Codec is not supported. */
+#define VERR_RECORDING_CODEC_NOT_SUPPORTED (-6903)
+/** Format not supported by the codec. */
+#define VERR_RECORDING_FORMAT_NOT_SUPPORTED (-6904)
+/** Recording is not possible due to a set restriction. */
+#define VERR_RECORDING_RESTRICTED (-6905)
+/** Recording limit (time, size, ...) has been reached. */
+#define VINF_RECORDING_LIMIT_REACHED (6906)
+/** Recording limit (time, size, ...) has been reached. */
+#define VERR_RECORDING_LIMIT_REACHED (-6906)
+/** Recording has been throttled due to current settings.
+ * This e.g. can happen when submitting more video frames than
+ * the current FPS setting allows. */
+#define VINF_RECORDING_THROTTLED (6907)
+/** Recording has been throttled due to current settings.
+ * This e.g. can happen when submitting more video frames than
+ * the current FPS setting allows. */
+#define VERR_RECORDING_THROTTLED (-6907)
+/** @} */
+
+/** @name Shared Clipboard Status Codes
+ * @{
+ */
+/** Maximum of concurrent clipboard transfers has been reached. */
+#define VERR_SHCLPB_MAX_TRANSFERS_REACHED (-7100)
+/** Maximum number of Shared Clipboard objects has been reached. */
+#define VERR_SHCLPB_MAX_OBJECTS_REACHED (-7101)
+/** Maximum number of Shared Clipboard lists has been reached. */
+#define VERR_SHCLPB_MAX_LISTS_REACHED (-7102)
+/** A Shared Clipboard list handle is invalid. */
+#define VERR_SHCLPB_LIST_HANDLE_INVALID (-7103)
+/** A Shared Clipboard objects handle is invalid. */
+#define VERR_SHCLPB_OBJ_HANDLE_INVALID (-7104)
+/** A Shared Clipboard transfer ID is invalid. */
+#define VERR_SHCLPB_TRANSFER_ID_NOT_FOUND (-7105)
+/** Maximum number of Shared Clipboard events for an event source has been reached. */
+#define VERR_SHCLPB_MAX_EVENTS_REACHED (-7106)
+/** @} */
+/* SED-END */
+
+/** @} */
+
+
+#endif /* !VBOX_INCLUDED_err_h */
+