/** @file * IPRT Serial Port API. */ /* * Copyright (C) 2017-2020 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef IPRT_INCLUDED_serialport_h #define IPRT_INCLUDED_serialport_h #ifndef RT_WITHOUT_PRAGMA_ONCE # pragma once #endif #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_serial IPRT Serial Port API * @ingroup grp_rt * * The IPRT serial port API provides a platform independent API to control a * serial port of the host. It supports receiving/transmitting data as well as * controlling and monitoring the status lines of a standard serial port. * * The user of the API is currently resposible for serializing calls to it. * The only exception is RTSerialPortEvtPollInterrupt() which can be called on * any thread to interrupt another thread waiting in RTSerialPortEvtPoll(). * * @{ */ /** Serial Port handle. */ typedef struct RTSERIALPORTINTERNAL *RTSERIALPORT; /** Pointer to a Serial Port handle. */ typedef RTSERIALPORT *PRTSERIALPORT; /** NIL Serial Port handle value. */ #define NIL_RTSERIALPORT ((RTSERIALPORT)0) /** * Supported parity settings. */ typedef enum RTSERIALPORTPARITY { /** Invalid parity setting. */ RTSERIALPORTPARITY_INVALID = 0, /** No parity used. */ RTSERIALPORTPARITY_NONE, /** Even parity used. */ RTSERIALPORTPARITY_EVEN, /** Odd parity used. */ RTSERIALPORTPARITY_ODD, /** Mark parity (parity bit always 1) used. */ RTSERIALPORTPARITY_MARK, /** Space parity (parity bit always 0) used. */ RTSERIALPORTPARITY_SPACE, /** 32bit hack. */ RTSERIALPORTPARITY_32BIT_HACK = 0x7fffffff } RTSERIALPORTPARITY; /** * Supported data bit count setting. */ typedef enum RTSERIALPORTDATABITS { /** Invalid bitcount setting. */ RTSERIALPORTDATABITS_INVALID = 0, /** 5 data bits. */ RTSERIALPORTDATABITS_5BITS, /** 6 data bits. */ RTSERIALPORTDATABITS_6BITS, /** 7 data bits. */ RTSERIALPORTDATABITS_7BITS, /** 8 data bits. */ RTSERIALPORTDATABITS_8BITS, /** 32bit hack. */ RTSERIALPORTDATABITS_32BIT_HACK = 0x7fffffff } RTSERIALPORTDATABITS; /** * Supported stop bit setting. */ typedef enum RTSERIALPORTSTOPBITS { /** Invalid stop bit setting. */ RTSERIALPORTSTOPBITS_INVALID = 0, /** One stop bit is used. */ RTSERIALPORTSTOPBITS_ONE, /** 1.5 stop bits are used. */ RTSERIALPORTSTOPBITS_ONEPOINTFIVE, /** 2 stop bits are used. */ RTSERIALPORTSTOPBITS_TWO, /** 32bit hack. */ RTSERIALPORTSTOPBITS_32BIT_HACK = 0x7fffffff } RTSERIALPORTSTOPBITS; /** * Serial port config structure. */ typedef struct RTSERIALPORTCFG { /** Baud rate. */ uint32_t uBaudRate; /** Used parity. */ RTSERIALPORTPARITY enmParity; /** Number of data bits. */ RTSERIALPORTDATABITS enmDataBitCount; /** Number of stop bits. */ RTSERIALPORTSTOPBITS enmStopBitCount; } RTSERIALPORTCFG; /** Pointer to a serial port config. */ typedef RTSERIALPORTCFG *PRTSERIALPORTCFG; /** Pointer to a const serial port config. */ typedef const RTSERIALPORTCFG *PCRTSERIALPORTCFG; /** @name RTSerialPortOpen flags * @{ */ /** Open the serial port with the receiver enabled to receive data. */ #define RTSERIALPORT_OPEN_F_READ RT_BIT(0) /** Open the serial port with the transmitter enabled to transmit data. */ #define RTSERIALPORT_OPEN_F_WRITE RT_BIT(1) /** Open the serial port with status line monitoring enabled to get notified about status line changes. */ #define RTSERIALPORT_OPEN_F_SUPPORT_STATUS_LINE_MONITORING RT_BIT(2) /** Open the serial port with BREAK condition detection enabled (Requires extra work on some hosts). */ #define RTSERIALPORT_OPEN_F_DETECT_BREAK_CONDITION RT_BIT(3) /** Open the serial port with loopback mode enabled. */ #define RTSERIALPORT_OPEN_F_ENABLE_LOOPBACK RT_BIT(4) /** Bitmask of valid flags. */ #define RTSERIALPORT_OPEN_F_VALID_MASK UINT32_C(0x0000001f) /** @} */ /** @name RTSerialPortChgModemLines flags * @{ */ /** Change the RTS (Ready To Send) line signal. */ #define RTSERIALPORT_CHG_STS_LINES_F_RTS RT_BIT(0) /** Change the DTR (Data Terminal Ready) line signal. */ #define RTSERIALPORT_CHG_STS_LINES_F_DTR RT_BIT(1) /** Bitmask of valid flags. */ #define RTSERIALPORT_CHG_STS_LINES_F_VALID_MASK UINT32_C(0x00000003) /** @} */ /** @name RTSerialPortQueryStatusLines flags * @{ */ /** The DCD (Data Carrier Detect) signal is active. */ #define RTSERIALPORT_STS_LINE_DCD RT_BIT(0) /** The RI (Ring Indicator) signal is active. */ #define RTSERIALPORT_STS_LINE_RI RT_BIT(1) /** The DSR (Data Set Ready) signal is active. */ #define RTSERIALPORT_STS_LINE_DSR RT_BIT(2) /** The CTS (Clear To Send) signal is active. */ #define RTSERIALPORT_STS_LINE_CTS RT_BIT(3) /** @} */ /** @name RTSerialPortEvtPoll flags * @{ */ /** Data was received and can be read. */ #define RTSERIALPORT_EVT_F_DATA_RX RT_BIT(0) /** All data was transmitted and there is room again in the transmit buffer. */ #define RTSERIALPORT_EVT_F_DATA_TX RT_BIT(1) /** A BREAK condition was detected on the communication channel. * Only available when BREAK condition detection was enabled when opening the serial port .*/ #define RTSERIALPORT_EVT_F_BREAK_DETECTED RT_BIT(2) /** One of the monitored status lines changed, check with RTSerialPortQueryStatusLines(). * Only available if status line monitoring was enabled when opening the serial port. */ #define RTSERIALPORT_EVT_F_STATUS_LINE_CHANGED RT_BIT(3) /** Status line monitor failed with an error and status line monitoring is disabled, * this cannot be given in the event mask but will be set if status line * monitoring is enabled and the monitor failed. */ #define RTSERIALPORT_EVT_F_STATUS_LINE_MONITOR_FAILED RT_BIT(4) /** Bitmask of valid flags. */ #define RTSERIALPORT_EVT_F_VALID_MASK UINT32_C(0x0000001f) /** @} */ /** * Opens a serial port with the specified flags. * * @returns IPRT status code. * @param phSerialPort Where to store the IPRT serial port handle on success. * @param pszPortAddress The address of the serial port (host dependent). * @param fFlags Flags to open the serial port with, see RTSERIALPORT_OPEN_F_*. */ RTDECL(int) RTSerialPortOpen(PRTSERIALPORT phSerialPort, const char *pszPortAddress, uint32_t fFlags); /** * Closes the given serial port handle. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. */ RTDECL(int) RTSerialPortClose(RTSERIALPORT hSerialPort); /** * Gets the native handle for an IPRT serial port handle. * * @returns The native handle. -1 on failure. * @param hSerialPort The IPRT serial port handle. */ RTDECL(RTHCINTPTR) RTSerialPortToNative(RTSERIALPORT hSerialPort); /** * Tries to read the given number of bytes from the serial port, blocking version. * * @returns IPRT status code. * @retval VERR_SERIALPORT_BREAK_DETECTED if a break was detected before the requested number of bytes was received. * @param hSerialPort The IPRT serial port handle. * @param pvBuf Where to store the read data. * @param cbToRead How much to read from the serial port. * @param pcbRead Where to store the number of bytes received until an error condition occurred, optional. */ RTDECL(int) RTSerialPortRead(RTSERIALPORT hSerialPort, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Tries to read the given number of bytes from the serial port, non-blocking version. * * @returns IPRT status code. * @retval VERR_SERIALPORT_BREAK_DETECTED if a break was detected before anything could be received. * @retval VINF_TRY_AGAIN if nothing could be read. * @param hSerialPort The IPRT serial port handle. * @param pvBuf Where to store the read data. * @param cbToRead How much to read from the serial port. * @param pcbRead Where to store the number of bytes received. */ RTDECL(int) RTSerialPortReadNB(RTSERIALPORT hSerialPort, void *pvBuf, size_t cbToRead, size_t *pcbRead); /** * Writes the given data to the serial port, blocking version. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * @param pvBuf The data to write. * @param cbToWrite How much to write. * @param pcbWritten Where to store the number of bytes written until an error condition occurred, optional. */ RTDECL(int) RTSerialPortWrite(RTSERIALPORT hSerialPort, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Writes the given data to the serial port, non-blocking version. * * @returns IPRT status code. * @retval VINF_TRY_AGAIN if nothing could be written. * @param hSerialPort The IPRT serial port handle. * @param pvBuf The data to write. * @param cbToWrite How much to write. * @param pcbWritten Where to store the number of bytes written. */ RTDECL(int) RTSerialPortWriteNB(RTSERIALPORT hSerialPort, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten); /** * Queries the current active serial port config. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * @param pCfg Where to store the current active config. */ RTDECL(int) RTSerialPortCfgQueryCurrent(RTSERIALPORT hSerialPort, PRTSERIALPORTCFG pCfg); /** * Change the serial port to the given config. * * @returns IPRT status code. * @retval VERR_SERIALPORT_INVALID_BAUDRATE if the baud rate is not supported on the serial port. * @param hSerialPort The IPRT serial port handle. * @param pCfg The config to write. * @param pErrInfo Where to store additional information on error, optional. */ RTDECL(int) RTSerialPortCfgSet(RTSERIALPORT hSerialPort, PCRTSERIALPORTCFG pCfg, PRTERRINFO pErrInfo); /** * Poll for an event on the given serial port. * * @returns IPRT status code. * @retval VERR_TIMEOUT if the timeout was reached before an event happened. * @retval VERR_INTERRUPTED if another thread interrupted the polling through RTSerialPortEvtPollInterrupt(). * @param hSerialPort The IPRT serial port handle. * @param fEvtMask The mask of events to receive, see RTSERIALPORT_EVT_F_* * @param pfEvtsRecv Where to store the bitmask of events received. * @param msTimeout Number of milliseconds to wait for an event. */ RTDECL(int) RTSerialPortEvtPoll(RTSERIALPORT hSerialPort, uint32_t fEvtMask, uint32_t *pfEvtsRecv, RTMSINTERVAL msTimeout); /** * Interrupt another thread currently polling for an event. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * * @note Any thread. */ RTDECL(int) RTSerialPortEvtPollInterrupt(RTSERIALPORT hSerialPort); /** * Sets or clears a BREAK condition on the given serial port. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * @param fSet Flag whether to set the BREAK condition or clear it. */ RTDECL(int) RTSerialPortChgBreakCondition(RTSERIALPORT hSerialPort, bool fSet); /** * Modify the status lines of the given serial port. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * @param fClear Combination of status lines to clear, see RTSERIALPORT_CHG_STS_LINES_F_*. * @param fSet Combination of status lines to set, see RTSERIALPORT_CHG_STS_LINES_F_*. * * @note fClear takes precedence over fSet in case the same status line bit is set in both arguments. */ RTDECL(int) RTSerialPortChgStatusLines(RTSERIALPORT hSerialPort, uint32_t fClear, uint32_t fSet); /** * Query the status of the status lines on the given serial port. * * @returns IPRT status code. * @param hSerialPort The IPRT serial port handle. * @param pfStsLines Where to store the bitmask of active status lines on success, * see RTSERIALPORT_STS_LINE_*. */ RTDECL(int) RTSerialPortQueryStatusLines(RTSERIALPORT hSerialPort, uint32_t *pfStsLines); /** @} */ RT_C_DECLS_END #endif /* !IPRT_INCLUDED_serialport_h */