@@@ English Native language name -- Native language country name (empty if this language is for all countries) English Language name, in English -- Language country name, in English (empty if native country name is empty) Oracle Corporation Comma-separated list of translators QApplication Executable %1 requires Qt %2.x, found Qt %3. Incompatible Qt Library Error VirtualBox - Error In %1 <html>%1 (rc=%2) Please try reinstalling VirtualBox. Make sure the kernel module has been loaded successfully. VirtualBox - Runtime Error Cannot access the kernel driver! Unknown error %2 during initialization of the Runtime Kernel driver not accessible The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Please try completely uninstalling and reinstalling VirtualBox. This error means that the kernel driver was either not able to allocate enough memory or that some mapping operation failed. The VirtualBox Linux kernel driver is either not loaded or not set up correctly. Please try setting it up again by executing '/sbin/vboxconfig' as root. If your system has EFI Secure Boot enabled you may also need to sign the kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load them. Please see your Linux system's documentation for more information. The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing '/sbin/vboxconfig' may correct this. Make sure that you are not mixing builds of VirtualBox from different sources. QIArrowButtonPress &Back &Next QIArrowSplitter &Details &Details (%1 of %2) QIInputDialog Name: QILabel &Copy QIMessageBox Copy all errors to the clipboard OK Cancel Yes No Copy SFTreeViewItem %1, %2: %3, %4: %5, %6: %7, %8: %9 col.1 text, col.2 name: col.2 text, col.3 name: col.3 text, col.4 name: col.4 text, col.5 name: col.5 text Full Read-only Yes UIActionPool Preview Monitor %1 &Connect Network Adapter Connect Network Adapter &%1 No USB Devices Connected No supported devices connected to the host PC No Webcams Connected No supported webcams connected to the host PC &VirtualBox &File &Close... Close the virtual machine &Window &Minimize Minimize active window &Help &Contents... Show help contents &VirtualBox Web Site... Open the browser and go to the VirtualBox product web site &VirtualBox Bug Tracker... Open the browser and go to the VirtualBox product bug tracker &VirtualBox Forums... Open the browser and go to the VirtualBox product forums &Oracle Web Site... Open the browser and go to the Oracle web site &Reset All Warnings Go back to showing all suppressed warnings and messages &Network Operations Manager... Display the Network Operations Manager window C&heck for Updates... Check for a new VirtualBox version &About VirtualBox... Display a window with product information &Preferences... global preferences window Display the global preferences window &Log &Find Log Viewer Open pane with searching options &Filter Open pane with filtering options &Bookmark Open pane with bookmarking options &Options Open pane with log viewer options &Refresh Refresh selected virtual machine log &Save... Save selected virtual machine log File Manager Host Guest Copy to guest Copy the selected object(s) from host to guest Copy to host Copy the selected object(s) from guest to host Log Session Go one level up to parent folder Go Home Go to home folder Go to Home Folder Delete Delete selected file object(s) Refresh Rename Create New Directory Copy Copy selected file object(s) Cut Cut selected file object(s) Paste Paste copied/cut file object(s) Select All Select all files objects Invert Selection Invert the current selection Show Properties Show the properties of currently selected file object(s) &File Mac OS X version &File Non Mac OS X version &Virtual Media Manager... Display the Virtual Media Manager window &Host Network Manager... Display the Host Network Manager window &Cloud Profile Manager... Display the Cloud Profile Manager window Import &Import Appliance... Import an appliance into VirtualBox Export &Export Appliance... Export one or more VirtualBox virtual machines as an appliance E&xtra Data Manager... Display the Extra Data Manager window E&xit Close application &Group &New Machine... Create new virtual machine &Add Machine... Add existing virtual machine Rena&me Group... Rename selected virtual machine group &Ungroup Ungroup items of selected virtual machine group &Sort Sort items of selected virtual machine group alphabetically &Machine &New... &Add... Gro&up Add new group based on selected virtual machines &Settings... Display the virtual machine settings window Cl&one... Clone selected virtual machine &Move... Move selected virtual machine &Remove... Remove selected virtual machines Sort group of first selected virtual machine alphabetically S&tart Start selected virtual machines S&how Switch to the windows of selected virtual machines &Normal Start &Headless Start Start selected virtual machines in the background &Detachable Start Start selected virtual machines with option of continuing in background &Pause Suspend execution of selected virtual machines &Reset Reset selected virtual machines Discard D&iscard Saved State... Discard saved state of selected virtual machines Show &Log... Show log files of selected virtual machines Re&fresh Refresh accessibility state of selected virtual machines S&how in Finder Show the VirtualBox Machine Definition files in Finder S&how in Explorer Show the VirtualBox Machine Definition files in Explorer S&how in File Manager Show the VirtualBox Machine Definition files in the File Manager Cr&eate Alias on Desktop Create alias files to the VirtualBox Machine Definition files on your desktop Cr&eate Shortcut on Desktop Create shortcut files to the VirtualBox Machine Definition files on your desktop &Close &Detach GUI Detach the GUI from headless VM &Save State Save state of selected virtual machines ACPI Sh&utdown Send ACPI Shutdown signal to selected virtual machines Po&wer Off Power off selected virtual machines &Details Open the machine details pane &Snapshots Open the machine snapshots pane &Logs Open the machine logs pane &Global Tools Menu &Virtual Media Manager Open the Virtual Media Manager &Host Network Manager Open the Host Network Manager &Cloud Profile Manager Open the Cloud Profile Manager &Snapshot &Take... Snapshot Pane Take a snapshot of the current virtual machine state &Delete... Delete selected snapshot of the virtual machine &Restore... Restore selected snapshot of the virtual machine &Properties Open pane with the selected snapshot properties &Clone... &Medium Media Manager &Copy... Re&lease... Re&fresh... &Network &Create... Network Manager Create new host-only network Remove selected host-only network Open pane with selected host-only network properties Refresh the list of host-only networks &Cloud Add &Add Profile... Cloud Profile Manager Add new cloud profile &Import Profiles... Import the list of cloud profiles from external files Remove &Remove Profile... Remove selected cloud profile Properties Profile &Properties Open pane with selected cloud profile properties Help &Show Help... Show cloud profile help Take Sn&apshot... Take a snapshot of the virtual machine Session I&nformation... Display the virtual machine session information window File Manager... Suspend the execution of the virtual machine Reset the virtual machine Save the state of the virtual machine Send the ACPI Shutdown signal to the virtual machine Power off the virtual machine &View &Full-screen Mode Switch between normal and full-screen mode Seam&less Mode Switch between normal and seamless desktop integration mode S&caled Mode Switch between normal and scaled mode &Minimize Window &Adjust Window Size Adjust window size and position to best fit the guest display Auto-resize &Guest Display Automatically resize the guest display when the window is resized Take Screensh&ot... Take guest display screenshot &Recording &Recording Settings... Display virtual machine settings window to configure video/audio recording Enable guest video/audio recording R&emote Display Allow remote desktop (RDP) connections to this machine &Menu Bar &Menu Bar Settings... Display window to configure menu-bar Show Menu &Bar Enable menu-bar &Status Bar &Status Bar Settings... Display window to configure status-bar Show Status &Bar Enable status-bar &Input &Keyboard &Keyboard Settings... Display global preferences window to configure keyboard shortcuts &Insert %1 that means send the %1 key sequence to the virtual machine Send the %1 sequence to the virtual machine &Mouse &Mouse Integration Enable host mouse pointer integration &Devices &Hard Disks &Hard Disk Settings... Display virtual machine settings window to configure hard disks &Optical Drives &Floppy Drives &Audio Audio Output Enable audio output Audio Input Enable audio input &Network Settings... Display virtual machine settings window to configure network adapters &USB &USB Settings... Display virtual machine settings window to configure USB devices &Webcams Shared &Clipboard &Drag and Drop &Shared Folders &Shared Folders Settings... Display virtual machine settings window to configure shared folders &Insert Guest Additions CD image... Insert the Guest Additions disk file into the virtual optical drive De&bug &Statistics... debug action &Command Line... debug action &Logging debug action Show &Log... debug action Dock Icon Show Monitor Preview Show Application Icon Disable Dock Icon Overlay Scale to %1% scale-factor Scale to %1% (unscaled output) scale-factor Scale to %1% (autoscaled output) scale-factor Enable Virtual Screen Resize to %1x%2 Virtual Screen Popup Menu Options Open panel with file manager options Open panel with file manager log Operations Open panel with file manager operations Open panel with file manager session Go Up Display the virtual machine file manager window Tools E&xport to OCI... Export selected virtual machine to OCI Try &Try Oracle Cloud for Free... Try Oracle cloud for free Try Oracle Cloud for Free Display Global Preferences Open Find Pane Open Filter Pane Open Bookmark Pane Open Options Pane Refresh Virtual Machine Log Save Virtual Machine Log Copy from Host to Guest Copy from Guest to Host Open Log Pane Open Operations Pane Open Session Pane Go One Level Up Delete Selected Object(s) Refresh Contents Rename selected file object Rename Selected Object Copy Selected Object(s) Cut Selected Object(s) Paste Copied/Cut Object(s) Select All Objects Invert Current Selection Show Properties of Current Object(s) &New Cloud VM... Create new cloud virtual machine E&xport Locally... Export selected virtual machine locally S&earch Search virtual machines with respect to a search term Take Snapshot Delete Snapshot Restore Snapshot Open Snapshot Properties Clone Virtual Machine Add a disk image Add Disk Image Create a new disk image Create Disk Image Copy selected disk image Copy Disk Image Move selected disk image Move Disk Image Remove selected disk image Remove Disk Image Release selected disk image Release Disk Image Open pane with selected disk image properties Open Disk Image Properties &Search Open the disk image search pane Open Disk Image Search Pane Refresh the list of disk images Refresh Disk Images Create Host-only Network Remove Host-only Network Open Host-only Network Properties Refresh Host-only Networks Add Cloud Profile Import Cloud Profiles Remove Cloud Profile Open Cloud Profile Properties Show Cloud Profile Help &Soft Keyboard... Display soft keyboard Guest Control Terminal... debug action UIAddDiskEncryptionPasswordDialog ID password table field Password password table field Used by the following %n hard disk(s): %1 This text is never used with n == 0. Feel free to drop the %n where possible, we only included it because of problems with Qt Linguist (but the user can see how many hard drives are in the tool-tip and doesn't need to be told). %1 - Disk Encryption This virtual machine is password protected. Please enter the %n encryption password(s) below. This text is never used with n == 0. Feel free to drop the %n where possible, we only included it because of problems with Qt Linguist (but the user can see how many passwords are in the list and doesn't need to be told). UIApplianceEditorWidget Virtual System %1 Name Product Product-URL Vendor Vendor-URL Version Description License Guest OS Type CPU RAM DVD Floppy Network Adapter USB Controller Sound Card Virtual Disk Image Unknown Hardware Item Original Value: %1 Configuration Warnings: Storage Controller (IDE) Storage Controller (SATA) Storage Controller (SCSI) Storage Controller (SAS) Detailed list of all components of all virtual machines of the current appliance Settings File Base Folder Primary Group UIApplianceImportEditorWidget Importing Appliance ... Reading Appliance ... &Import hard drives as VDI MAC Address &Policy: Include all network adapter MAC addresses Include only NAT network adapter MAC addresses Generate new MAC addresses for all network adapters Additional Options: When checked, all the hard drives that belong to this appliance will be imported in VDI format. &Machine Base Folder: Include all network adapter MAC addresses during importing. Include only NAT network adapter MAC addresses during importing. Generate new MAC addresses for all network adapters during importing. UIApplianceModelItem %1 col.1 text %1: %2 col.1 text: col.2 text UIApplianceUnverifiedCertificateViewer Unverifiable Certificate! Continue? The appliance is signed by an unverified self signed certificate issued by '%1'. We recommend to only proceed with the importing if you are sure you should trust this entity. The appliance is signed by an unverified certificate issued to '%1'. We recommend to only proceed with the importing if you are sure you should trust this entity. True False <tr><td>%1:</td><td>%2</td></tr> key: value Issuer Subject Not Valid Before Not Valid After Serial Number Self-Signed Authority (CA) Public Algorithm %1 (%2) value (clarification) Signature Algorithm X.509 Version Number UIAudioControllerEditor Audio &Controller: UIAudioHostDriverEditor Host Audio &Driver: UIBaseMemoryEditor Base &Memory: %1 MB MB UIBootOrderEditor &Boot Order: Move Up Move Down UIChooserAbstractModel New group UIChooserItemGroup %1 Group item tool-tip / Group name %n group(s) Group item tool-tip / Group info %1 Group item tool-tip / Group info wrapper %n machine(s) Group item tool-tip / Machine info (%n running) Group item tool-tip / Running machine info %1 Group item tool-tip / Machine info wrapper %1 %2 Group item tool-tip / Machine info wrapper, including running Collapse group Expand group UIChooserNodeGlobal Tools UIChooserNodeGroup Virtual Machine group UIChooserNodeMachine Virtual Machine UIChooserSearchWidget Navigate to the next item among the search results Navigate to the previous item among the search results Enter a search term to be used during virtual machine search Close the search widget UIChooserView Contains a tree of Virtual Machines and their groups UICloudProfileDetailsWidget Name: Properties: Contains cloud profile settings Enter a name for the new profile... Enter a name for this profile... Reset Reset changes in current profile details Reset Changes (%1) Add Add a new profile with following name Add Profile (%1) Apply Apply changes in current profile details Apply Changes (%1) UICloudProfileManager Cloud Profile Manager Reset Apply Close Reset changes in current cloud profile details Apply changes in current cloud profile details Close dialog without saving Reset Changes (%1) Apply Changes (%1) Close Window (%1) Add Profile UICommon MB size suffix MBytes=1024 KBytes %1 MB details report Enabled details report (3D Acceleration) Disabled details report (3D Acceleration) not set details report (execution engine) Active details report (Nested Paging) Inactive details report (Nested Paging) Active details report (Unrestricted Execution) Inactive details report (Unrestricted Execution) Execution engine details report Nested Paging Unrestricted Execution Execution Cap details report Paravirtualization Interface details report Processors details report Powered Off MachineState Saved MachineState Aborted MachineState Teleported MachineState Running MachineState Paused MachineState Guru Meditation MachineState Teleporting MachineState Taking Snapshot MachineState Taking Online Snapshot MachineState Taking Live Snapshot MachineState Starting MachineState Stopping MachineState Saving MachineState Restoring MachineState Teleporting Paused VM MachineState Deleting Snapshot MachineState Restoring Snapshot MachineState Setting Up MachineState Unlocked SessionState Locked SessionState Spawning SessionState Unlocking SessionState None ParavirtProvider Default ParavirtProvider Legacy ParavirtProvider Minimal ParavirtProvider Hyper-V ParavirtProvider KVM ParavirtProvider None DeviceType Floppy DeviceType Optical DeviceType Hard Disk DeviceType Network DeviceType USB DeviceType Shared Folder DeviceType Disabled ClipboardType Host To Guest ClipboardType Guest To Host ClipboardType Bidirectional ClipboardType Disabled DragAndDropType Host To Guest DragAndDropType Guest To Host DragAndDropType Bidirectional DragAndDropType PS/2 Mouse PointingHIDType USB Mouse PointingHIDType USB Tablet PointingHIDType PS/2 and USB Mouse PointingHIDType USB Multi-Touch Tablet PointingHIDType None GraphicsControllerType VBoxVGA GraphicsControllerType VMSVGA GraphicsControllerType VBoxSVGA GraphicsControllerType Normal MediumType Immutable MediumType Writethrough MediumType Shareable MediumType Readonly MediumType Multi-attach MediumType Dynamically allocated storage MediumVariant New dynamically allocated storage MediumVariant Dynamically allocated differencing storage MediumVariant Fixed size storage MediumVariant Dynamically allocated storage split into files of less than 2GB MediumVariant Dynamically allocated differencing storage split into files of less than 2GB MediumVariant Fixed size storage split into files of less than 2GB MediumVariant Dynamically allocated compressed storage MediumVariant Dynamically allocated differencing compressed storage MediumVariant Fixed size ESX storage MediumVariant Fixed size storage on raw disk MediumVariant Not attached NetworkAttachmentType NAT NetworkAttachmentType Bridged Adapter NetworkAttachmentType Internal Network NetworkAttachmentType Host-only Adapter NetworkAttachmentType Generic Driver NetworkAttachmentType NAT Network NetworkAttachmentType PCnet-PCI II (Am79C970A) NetworkAdapterType PCnet-FAST III (Am79C973) NetworkAdapterType Intel PRO/1000 MT Desktop (82540EM) NetworkAdapterType Intel PRO/1000 T Server (82543GC) NetworkAdapterType Intel PRO/1000 MT Server (82545EM) NetworkAdapterType Paravirtualized Network (virtio-net) NetworkAdapterType Deny NetworkAdapterPromiscModePolicy Allow VMs NetworkAdapterPromiscModePolicy Allow All NetworkAdapterPromiscModePolicy Disconnected PortMode Host Pipe PortMode Host Device PortMode Raw File PortMode TCP PortMode OHCI USBControllerType EHCI USBControllerType xHCI USBControllerType Not supported USBDeviceState Unavailable USBDeviceState Busy USBDeviceState Available USBDeviceState Held USBDeviceState Captured USBDeviceState Ignore USBDeviceFilterAction Hold USBDeviceFilterAction Null Audio Driver AudioDriverType Windows Multimedia AudioDriverType OSS Audio Driver AudioDriverType ALSA Audio Driver AudioDriverType Windows DirectSound AudioDriverType CoreAudio AudioDriverType PulseAudio AudioDriverType Solaris Audio AudioDriverType ICH AC97 AudioControllerType SoundBlaster 16 AudioControllerType Intel HD Audio AudioControllerType Null AuthType External AuthType Guest AuthType IDE StorageBus SATA StorageBus SCSI StorageBus Floppy StorageBus SAS StorageBus USB StorageBus PCIe StorageBus virtio-scsi StorageBus LsiLogic StorageControllerType BusLogic StorageControllerType AHCI StorageControllerType PIIX3 StorageControllerType PIIX4 StorageControllerType ICH6 StorageControllerType I82078 StorageControllerType LsiLogic SAS StorageControllerType USB StorageControllerType NVMe StorageControllerType virtio-scsi StorageControllerType PIIX3 ChipsetType ICH9 ChipsetType UDP NATProtocol TCP NATProtocol B size suffix Bytes KB size suffix KBytes=1024 Bytes GB size suffix GBytes=1024 MBytes TB size suffix TBytes=1024 GBytes PB size suffix PBytes=1024 TBytes IDE Primary Device 0 StorageSlot IDE Primary Device 1 StorageSlot IDE Secondary Device 0 StorageSlot IDE Secondary Device 1 StorageSlot SATA Port %1 StorageSlot SCSI Port %1 StorageSlot SAS Port %1 StorageSlot Floppy Device %1 StorageSlot USB Port %1 StorageSlot NVMe Port %1 StorageSlot virtio-scsi Port %1 StorageSlot Name OS Location Groups RAM CPU Count CPU Execution Cap Boot Order Chipset Type Firmware Acceleration VRAM Screen Count Scale Factor Graphics Controller VRDE Recording Hard Disks Optical Devices Floppy Devices Driver Controller Input/Output Not Attached network adapter NAT Bridget Adapter Internal Network Host Only Adapter Generic Driver NAT Network Disconnected serial port Host Pipe Host Device Raw File TCP Device Filters Menu Bar Status Bar Mini Toolbar General DetailsElementType Preview DetailsElementType System DetailsElementType Display DetailsElementType Storage DetailsElementType Audio DetailsElementType Network DetailsElementType Serial ports DetailsElementType USB DetailsElementType Shared folders DetailsElementType User interface DetailsElementType Description DetailsElementType Hard Disks IndicatorType Optical Disks IndicatorType Floppy Disks IndicatorType Audio IndicatorType Network IndicatorType USB IndicatorType Shared Folders IndicatorType Display IndicatorType Recording IndicatorType Features IndicatorType Mouse IndicatorType Keyboard IndicatorType General InformationElementType Preview InformationElementType System InformationElementType Display InformationElementType Storage InformationElementType Audio InformationElementType Network InformationElementType Serial ports InformationElementType USB InformationElementType Shared folders InformationElementType User interface InformationElementType Description InformationElementType Runtime attributes InformationElementType Storage statistics InformationElementType Network statistics InformationElementType VDI (VirtualBox Disk Image) UIMediumFormat VMDK (Virtual Machine Disk) UIMediumFormat VHD (Virtual Hard Disk) UIMediumFormat HDD (Parallels Hard Disk) UIMediumFormat QED (QEMU enhanced disk) UIMediumFormat QCOW (QEMU Copy-On-Write) UIMediumFormat Video/Audio UISettingsDefs::RecordingMode Video Only UISettingsDefs::RecordingMode Audio Only UISettingsDefs::RecordingMode %n year(s) %n month(s) %n day(s) %n hour(s) %n minute(s) %n second(s) Please choose a virtual hard disk file All virtual hard disk files (%1) Please choose a virtual optical disk file All virtual optical disk files (%1) Please choose a virtual floppy disk file All virtual floppy disk files (%1) All files (*) Unknown device USB device details Unknown device %1:%2 USB device details Vendor ID: %1 Product ID: %2 Revision: %3 USB device tooltip Serial No. %1 USB device tooltip State: %1 USB device tooltip Vendor ID: %1 USB filter tooltip Product ID: %2 USB filter tooltip Revision: %3 USB filter tooltip Product: %4 USB filter tooltip Manufacturer: %5 USB filter tooltip Serial No.: %1 USB filter tooltip Port: %1 USB filter tooltip State: %1 USB filter tooltip User-defined serial port Inaccessible medium Empty medium Host Drive '%1' medium Host Drive %1 (%2) medium Type (Format): %1 (%2) medium Attached to: %1 image Not Attached image Checking accessibility... medium Failed to check accessibility of disk image files. medium No disk image file selected medium You can also change this while the machine is running. No disk image files available medium You can create or add disk image files in the virtual machine settings. Attaching this hard disk will be performed indirectly using a newly created differencing hard disk. medium Encrypted medium Checking... medium Some of the files in this hard disk chain are inaccessible. Please use the Virtual Medium Manager to inspect these files. medium This base hard disk is indirectly attached using the following differencing hard disk: medium Differencing MediumType Adapter %1 Please choose a location for new virtual hard disk file Paravirtualized Network (virtio-net 1.0) NetworkAdapterType PCnet-ISA (Am79C960) NetworkAdapterType Acquire cloud instances ... Acquire cloud instance info ... Pause instance ... Start instance ... Cloud Network [EXPERIMENTAL] NetworkAttachmentType UICustomFileSystemModel Name Size Change Time Owner Permissions Path New Directory Local Path UIDetails Name details (general) Operating System details (general) Settings File Location details (general) Groups details (general) Information Inaccessible details Base Memory details (system) %1 MB details Processors details (system) Execution Cap details (system) %1% details Boot Order details (system) Chipset Type details (system) EFI details (system) Enabled details (system/EFI) Disabled details (system/EFI) VT-x/AMD-V details (system) Nested Paging details (system) PAE/NX details (system) Minimal Paravirtualization details (system) Hyper-V Paravirtualization details (system) KVM Paravirtualization details (system) Acceleration details (system) Video Memory details (display) Screens details (display) Scale-factor details (display) 2D Video details (display) 3D details (display) Acceleration details (display) Remote Desktop Server Port details (display/vrde) Remote Desktop Server details (display/vrde) Disabled details (display/vrde/VRDE server) Frame Size: %1x%2, Frame Rate: %3fps, Bit Rate: %4kbps [Optical Drive] details (storage) Not Attached details (storage) Host Driver details (audio) Controller details (audio) Audio Output details (audio) Enabled details (audio/output) Disabled details (audio/output) Audio Input details (audio) Enabled details (audio/input) Disabled details (audio/input) Disabled details (audio) Bridged Adapter, %1 details (network) Internal Network, '%1' details (network) Host-only Adapter, '%1' details (network) Generic Driver, '%1' details (network) Generic Driver, '%1' { %2 } details (network) NAT Network, '%1' details (network) Adapter %1 details (network) Disabled details (network/adapter) Port %1 details (serial) Disabled details (serial) USB Controller details (usb) Device Filters details (usb) %1 (%2 active) details (usb) Disabled details (usb) USB Controller Inaccessible details (usb) Shared Folders details (shared folders) None details (shared folders) Menu-bar details (user interface) Enabled details (user interface/menu-bar) Disabled details (user interface/menu-bar) Status-bar details (user interface) Enabled details (user interface/status-bar) Disabled details (user interface/status-bar) Mini-toolbar Position details (user interface) Top details (user interface/mini-toolbar position) Bottom details (user interface/mini-toolbar position) Mini-toolbar details (user interface) Disabled details (user interface/mini-toolbar) None details (description) Recording File details (display/recording) Recording Attributes details (display/recording) Recording details (display/recording) Disabled details (display/recording) Graphics Controller details (display) USB 1.1 (OHCI) Controller details (usb) USB 2.0 (OHCI + EHCI) Controller details (usb) USB 3.0 (xHCI) Controller details (usb) %1 MB UIDetailsElement %1 details like 'General details' or 'Storage details' UIDetailsSet Contains the details of virtual machine '%1' UIDetailsView Contains a list of Virtual Machine details UIDnDHandler Dropping data ... Retrieving data ... UIDownloader Looking for %1... Downloading %1... Verifying %1... UIDownloaderAdditions VirtualBox Guest Additions Select folder to save Guest Additions image to UIDownloaderExtensionPack VirtualBox Extension Pack Select folder to save %1 to UIDownloaderUserManual VirtualBox User Manual Select folder to save User Manual to UIEmptyFilePathSelector Choose... UIErrorString Result Code: error info Component: error info Interface: error info Callee: error info Callee RC: error info UIExtensionPackageItem %1, %2: %3, %4 col.2 text, col.3 name: col.3 text, col.1 name %1, %2: %3 col.2 text, col.3 name: col.3 text UIFDCreationDialog File Path: Size: Format disk as FAT12 1.44M 1.2M 720K 360K Floppy Disk Creator UIFileManager %1 - File Manager Close Clear Cancel Not yet started Working Paused Canceled Succeded Failed Invalid Remove Selected Remove Finished Remove All List directories on top List directories before files Ask before delete Show a confirmation dialog before deleting files and directories Human readable sizes Show file/directory sizes in human readable format rather than in bytes Password Show Password User name to authenticate session creation User Name Password to authenticate session creation Create Session Close Session Total Size bytes File Count Delete the selected file(s) and/or folder(s) Ask for this confirmation next time Delete confirmation can be disabled/enabled also from the Options panel. Unknown File Directory Symbolic Link Size: %1 bytes Allocated: %1 bytes directory file symbolic link character device block device fifo socket whiteout unknown illegal-value Type: %1 INode: %1 Device: %1 Hardlinks: %1 Mode: %1 Attributes: %1 Device ID: %1 Owner: %1 (%2) Group: %1 (%2) Birth: %1 Change: %1 Modified: %1 Access: %1 Selected: %1 files and %2 directories Size (non-recursive): %1 bytes Properties Name: %1 Created: %1 Owner: %1 Show hidden objects Show hidden files/directories Guest File System Host File System No Guest Session found! Please use the Session Panel to start a new guest session UIFilePathSelector &Copy Other... Reset Displays a window to select a different folder. Resets the folder path to the default value. Displays a window to select a different file. Resets the file path to the default value. <reset to default> The actual default path value will be displayed after accepting the changes and opening this window again. <not selected> Please use the Other... item from the drop-down list to select a path. Holds the folder path. Holds the file path. UIFormEditorWidget Edit... Name Value Assign value ... UIGlobalSettingsDisplay Maximum Guest Screen &Size: &Width: &Height: Machine Windows: &Raise Window Under Mouse Holds the maximum width which we would like the guest to use. Holds the maximum height which we would like the guest to use. When checked, machine windows will be raised when the mouse pointer moves over them. Scale Factor: Controls the guest screen scale factor. Automatic Maximum Guest Screen Size Suggest a reasonable maximum screen size to the guest. The guest will only see this suggestion when guest additions are installed. None Maximum Guest Screen Size Do not attempt to limit the size of the guest screen. Hint Maximum Guest Screen Size Suggest a maximum screen size to the guest. The guest will only see this suggestion when guest additions are installed. UIGlobalSettingsExtension Lists all installed packages. Active Name Version &Extension Packages Extensions Add Package Remove Package Adds new package. Removes selected package. Select an extension package file Extension package files (%1) UIGlobalSettingsGeneral Holds the path to the default virtual machine folder. This folder is used, if not explicitly specified otherwise, when creating new virtual machines. Holds the path to the library that provides authentication for Remote Display (VRDP) clients. Default &Machine Folder: V&RDP Authentication Library: When checked, the host screensaver will be disabled whenever a virtual machine is running. Host Screensaver: &Disable When Running Virtual Machines UIGlobalSettingsInput When checked, the keyboard is automatically captured every time the VM window is activated. When the keyboard is captured, all keystrokes (including system ones like Alt-Tab) are directed to the VM. &Auto Capture Keyboard Host Key Combination Some items have the same shortcuts assigned. &VirtualBox Manager Virtual &Machine Lists all available shortcuts which can be configured. Holds a sequence to filter the shortcut list. UIGlobalSettingsLanguage Lists all available user interface languages. The effective language is written in bold. Select Default to reset to the system default language. Name Id Language Author &Interface Languages Language: Author(s): UIGlobalSettingsNetwork &NAT Networks Lists all available NAT networks. The name %1 is being used for several NAT networks. Active NAT network Name Add NAT Network Remove NAT Network Edit NAT Network Adds new NAT network. Removes selected NAT network. Edits selected NAT network. UIGlobalSettingsNetworkDetailsNAT NAT Network Details &Enable Network Network &Name: Holds the name for this network. Network &CIDR: Holds the CIDR for this network. Network Options: Supports &DHCP Supports &IPv6 Advertise Default IPv6 &Route &Port Forwarding When checked, this network will be enabled. When checked, this network will support DHCP. When checked, this network will support IPv6. When checked, this network will be advertised as the default IPv6 route. Displays a window to configure port forwarding rules. UIGlobalSettingsPortForwardingDlg Port Forwarding Rules IPv4 IPv6 UIGlobalSettingsProxy When chosen, VirtualBox will try to auto-detect host proxy settings for tasks like downloading Guest Additions from the network or checking for updates. &Auto-detect Host Proxy Settings When chosen, VirtualBox will use direct Internet connection for tasks like downloading Guest Additions from the network or checking for updates. &Direct Connection to the Internet When chosen, VirtualBox will use the proxy settings supplied for tasks like downloading Guest Additions from the network or checking for updates. &Manual Proxy Configuration &URL: No proxy URL is currently specified. Invalid proxy URL is currently specified. You have provided a proxy password. Please be aware that the password will be saved in plain text. You may wish to configure a system-wide proxy instead and not store application-specific settings. Holds the proxy URL. The format is: <table cellspacing=0 style='white-space:pre'><tr><td>[{type}://][{userid}[:{password}]@]{server}[:{port}]</td></tr><tr><td>http://username:password@proxy.host.com:port</td></tr></table> UIGlobalSettingsUpdate When checked, the application will periodically connect to the VirtualBox website and check whether a new VirtualBox version is available. &Check for Updates &Once per: Next Check: Check for: Choose this if you only wish to be notified about stable updates to VirtualBox. &Stable Release Versions Choose this if you wish to be notified about all new VirtualBox releases. &All New Releases Choose this to be notified about all new VirtualBox releases and pre-release versions of VirtualBox. All New Releases and &Pre-Releases Selects how often the new version check should be performed. Note that if you want to completely disable this check, just clear the above check box. UIGraphicsControllerEditor &Graphics Controller: UIGraphicsTextPane %1: %2 'key: value', like 'Name: MyVM' UIGuestControlTreeWidget Terminate Process Expand All Collapse All Terminate Session Remove All Terminated Sessions/Processes Properties UIGuestProcessControlDialog %1 - Guest Control Close UIGuestProcessControlWidget Session/Process ID Session Name/Process Command Session/Process Status UIGuestProcessTreeItem Process Name Process Id Process Status Executable Path Arguments UIGuestSessionTreeItem Session Name Session Id Session Status UIHelpButton &Help UIHostComboEditor Left %1 Right %1 <key_%1> Left Shift Right Shift Left Ctrl Right Ctrl Left Alt Right Alt Left WinKey Right WinKey Menu key Alt Gr Caps Lock Scroll Lock Host+ None UIHostNetworkDetailsWidget &Adapter &DHCP Server Configure Adapter &Automatically Configure Adapter &Manually &IPv4 Address: Holds the host IPv4 address for this adapter. IPv4 Network &Mask: Holds the host IPv4 network mask for this adapter. I&Pv6 Address: Holds the host IPv6 address for this adapter if IPv6 is supported. IPv6 Prefix &Length: Holds the host IPv6 prefix length for this adapter if IPv6 is supported. Reset Apply Reset changes in current interface details Apply changes in current interface details Reset Changes (%1) Apply Changes (%1) &Enable Server When checked, the DHCP Server will be enabled for this network on machine start-up. Server Add&ress: Holds the address of the DHCP server servicing the network associated with this host-only adapter. Server &Mask: Holds the network mask of the DHCP server servicing the network associated with this host-only adapter. &Lower Address Bound: Holds the lower address bound offered by the DHCP server servicing the network associated with this host-only adapter. &Upper Address Bound: Holds the upper address bound offered by the DHCP server servicing the network associated with this host-only adapter. Reset changes in current DHCP server details Apply changes in current DHCP server details Host interface %1 is set to obtain the address automatically but the corresponding DHCP server is not enabled. Host interface %1 does not currently have a valid IPv4 address. Host interface %1 does not currently have a valid IPv4 network mask. Host interface %1 does not currently have a valid IPv6 address. Host interface %1 does not currently have a valid IPv6 prefix length. Host interface %1 does not currently have a valid DHCP server address. Host interface %1 does not currently have a valid DHCP server mask. Host interface %1 does not currently have a valid DHCP server lower address bound. Host interface %1 does not currently have a valid DHCP server upper address bound. UIHostNetworkManager DHCP Server Name IPv4 Address/Mask IPv6 Address/Mask Host Network Manager Reset Apply Close Reset changes in current host network details Apply changes in current host network details Close dialog without saving Reset Changes (%1) Apply Changes (%1) Close Window (%1) Adding network ... Removing network ... UIHotKeyEditor Unset shortcut Reset shortcut to default UIHotKeyTableModel Name Shortcut %1: %2 scope: description UIImportLicenseViewer The virtual system "%1" requires that you agree to the terms and conditions of the software license agreement shown below. Click Agree to continue or click Disagree to cancel the import. Software License Agreement &Disagree &Agree &Print... &Save... Text (*.txt) Save license to file... UIIndicatorsPool Adapter %1 (%2) Network tooltip IP Network tooltip Cable Network tooltip Connected cable (Network tooltip) Disconnected cable (Network tooltip) No USB devices attached USB tooltip No shared folders Shared folders tooltip Video memory Display tooltip Screens Display tooltip 3D acceleration Display tooltip Recording disabled Recording tooltip Video/audio recording file Recording tooltip Audio recording file Recording tooltip Video recording file Recording tooltip Indicates whether the host mouse pointer is captured by the guest OS:%1 Mouse tooltip pointer is not captured Mouse tooltip pointer is captured Mouse tooltip mouse integration (MI) is On Mouse tooltip MI is Off, pointer is captured Mouse tooltip MI is Off, pointer is not captured Mouse tooltip Note that the mouse integration feature requires Guest Additions to be installed in the guest OS. Mouse tooltip Indicates whether the host keyboard is captured by the guest OS:%1 Keyboard tooltip keyboard is not captured Keyboard tooltip keyboard is captured Keyboard tooltip UIItemHostNetwork Enable DHCP Server Adapter Automatically configured interface Manually configured interface IPv4 Address Not set address IPv4 Network Mask Not set mask IPv6 Address IPv6 Prefix Length Not set length DHCP Server Enabled server Disabled server Address Network Mask Lower Bound Not set bound Upper Bound UIItemNetworkNAT %1, %2 col.2 text, col.1 name %1 col.2 text Network Name [empty] %1 (renamed from %2) Old Network Name New Network Name Network CIDR Supports DHCP yes no Supports IPv6 Default IPv6 route No new name specified for the NAT network previously called %1. No CIDR specified for the NAT network %1. No CIDR specified for the NAT network previously called %1. Invalid CIDR specified (%1) for the NAT network %2. Invalid CIDR specified (%1) for the NAT network previously called %2. UILanguageItem (built-in) Language <unavailable> Language <unknown> Author(s) Default Language UILineTextEdit &Edit UIMachineLogic Select a filename for the screenshot ... UIMachinePreview No preview Update disabled Every 0.5 s Every 1 s Every 2 s Every 5 s Every 10 s UIMachineSettingsAudio When checked, a virtual PCI audio card will be plugged into the virtual machine and will communicate with the host audio system using the specified driver. Enable &Audio Host Audio &Driver: Audio &Controller: Selects the type of the virtual sound card. Depending on this value, VirtualBox will provide different audio hardware to the virtual machine. Selects the audio output driver. The Null Audio Driver makes the guest see an audio card, however every access to it will be ignored. Extended Features: When checked, output to the virtual audio device will reach the host. Otherwise the guest is muted. Enable Audio &Output When checked, the guest will be able to capture audio input from the host. Otherwise the guest will capture only silence. Enable Audio &Input UIMachineSettingsDisplay Video &Memory: Controls the amount of video memory provided to the virtual machine. Extended Features: When checked, the virtual machine will be given access to the 3D graphics capabilities available on the host. Enable &3D Acceleration &Remote Display When checked, the VM will act as a Remote Desktop Protocol (RDP) server, allowing remote clients to connect and operate the VM (when it is running) using a standard RDP client. &Enable Server Server &Port: Authentication &Method: Authentication &Timeout: When checked, the virtual machine will be given access to the Video Acceleration capabilities available on the host. Enable &2D Video Acceleration Mo&nitor Count: Controls the amount of virtual monitors provided to the virtual machine. &Allow Multiple Connections When checked, VirtualBox will record the virtual machine session as a video file. File &Path: Frame &Size: &Frame Rate: &Screens: &Screen Scale Factor: Controls the guest screen scale factor. Acceleration: Holds the VRDP Server port number. You may specify <tt>0</tt> (zero), to select port 3389, the standard port for RDP. Selects the VRDP authentication method. Holds the timeout for guest authentication, in milliseconds. When checked, multiple simultaneous connections to the VM are permitted. Holds the filename VirtualBox uses to save the recorded content. Selects the resolution (frame size) of the recorded video. Holds the horizontal resolution (frame width) of the recorded video. Holds the vertical resolution (frame height) of the recorded video. Controls the maximum number of frames per second. Additional frames will be skipped. Reducing this value will increase the number of skipped frames and reduce the file size. Controls the quality. Increasing this value will make the video look better at the cost of an increased file size. Holds the bitrate in kilobits per second. Increasing this value will make the video look better at the cost of an increased file size. &Audio Quality: The virtual machine is set up to use hardware graphics acceleration. However the host system does not currently provide this, so you will not be able to start the machine. The virtual machine is currently assigned less than %1 of video memory which is the minimum amount required to switch to full-screen or seamless mode. The virtual machine is currently assigned less than %1 of video memory which is the minimum amount required for High Definition Video to be played efficiently. The virtual machine is set up to use hardware graphics acceleration and the operating system hint is set to Windows Vista or later. For best performance you should set the machine's video memory to at least %1. The virtual machine is set up to use Video Stream Acceleration. As this feature only works with Windows guest systems it will be disabled. Remote Display is currently enabled for this virtual machine. However, this requires the %1 to be installed. Please install the Extension Pack from the VirtualBox download site as otherwise your VM will be started with Remote Display disabled. The VRDE server port value is not currently specified. The VRDE authentication timeout value is not currently specified. fps kbps User Defined %1 fps low quality medium quality high quality About %1MB per 5 minute video Screen %1 When checked, enables video recording for screen %1. &Graphics Controller: Selects the graphics adapter type the virtual machine will use. Re&cording &Enable Recording Recording &Mode: Selects the recording mode. &Video Quality: Controls the quality. Increasing this value will make the audio sound better at the cost of an increased file size. The virtual machine is configured to use 3D acceleration. This will work only if you pick a different graphics controller (%1). Either disable 3D acceleration or switch to required graphics controller type. The latter will be done automatically if you confirm your changes. The virtual machine is configured to use a graphics controller other than the recommended one (%1). Please consider switching unless you have a reason to keep the currently selected graphics controller. UIMachineSettingsGeneral Basi&c A&dvanced &Shared Clipboard: Selects which clipboard data will be copied between the guest and the host OS. This feature requires Guest Additions to be installed in the guest OS. S&napshot Folder: D&escription Holds the description of the virtual machine. The description field is useful for commenting on configuration details of the installed guest OS. D&rag'n'Drop: Selects which data will be copied between the guest and the host OS by drag'n'drop. This feature requires Guest Additions to be installed in the guest OS. E&nter New Password: C&onfirm New Password: Selects the cipher to be used for encrypting the virtual machine disks. Disk Enc&ryption When checked, disks attached to this virtual machine will be encrypted. En&able Disk Encryption Disk Encryption C&ipher: Holds the encryption password for disks attached to this virtual machine. Confirms the disk encryption password. No name specified for the virtual machine. The virtual machine operating system hint is set to a 64-bit type. 64-bit guest systems require hardware virtualization, so this will be enabled automatically if you confirm the changes. You are trying to enable disk encryption for this virtual machine. However, this requires the %1 to be installed. Please install the Extension Pack from the VirtualBox download site. Disk encryption cipher type not specified. Disk encryption password empty. Disk encryption passwords do not match. Holds the path where snapshots of this virtual machine will be stored. Be aware that snapshots can take quite a lot of storage space. Leave Unchanged cipher type UIMachineSettingsInterface Allows to modify VM menu-bar contents. Mini ToolBar: Show at &Top of Screen Allows to modify VM status-bar contents. When checked, show the Mini ToolBar in full-screen and seamless modes. Show in &Full-screen/Seamless When checked, show the Mini ToolBar at the top of the screen, rather than in its default position at the bottom of the screen. UIMachineSettingsNetwork When checked, plugs this virtual network adapter into the virtual machine. &Enable Network Adapter Selects the type of the virtual network adapter. Depending on this value, VirtualBox will provide different network hardware to the virtual machine. &Attached to: Adapter &Type: &Name: A&dvanced Holds the MAC address of this adapter. It contains exactly 12 characters chosen from {0-9,A-F}. Note that the second character must be an even digit. Generates a new random MAC address. &Cable Connected &Port Forwarding &Promiscuous Mode: Selects the promiscuous mode policy of the network adapter when attached to an internal network, host only network or a bridge. Generic Properties: &MAC Address: Selects how this virtual adapter is attached to the real network of the Host OS. Shows additional network adapter options. Holds the configuration settings for the network attachment driver. The settings should be of the form name=value and will depend on the driver. Use shift-enter to add a new entry. When checked, the virtual network cable is plugged in. Displays a window to configure port forwarding rules. No bridged network adapter is currently selected. No internal network name is currently specified. No host-only network adapter is currently selected. No generic driver is currently selected. No NAT network name is currently specified. The MAC address must be 12 hexadecimal digits long. The second digit in the MAC address may not be odd as only unicast addresses are allowed. No cloud network name is currently specified. UIMachineSettingsPortForwardingDlg Port Forwarding Rules UIMachineSettingsSF Lists all shared folders accessible to this machine. Use 'net use x: \\vboxsvr\share' to access a shared folder named share from a DOS-like OS, or 'mount -t vboxsf share mount_point' to access it from a Linux OS. This feature requires Guest Additions. Name Path Access Shared &Folders Auto Mount At Add Shared Folder Edit Shared Folder Remove Shared Folder Adds new shared folder. Edits selected shared folder. Removes selected shared folder. Machine Folders Transient Folders UIMachineSettingsSFDetails Folder Path: Folder Name: Holds the name of the shared folder (as it will be seen by the guest OS). When checked, the guest OS will not be able to write to the specified shared folder. &Read-only &Make Permanent When checked, the guest OS will try to automatically mount the shared folder on startup. &Auto-mount When checked, this shared folder will be permanent. Mount point: Where to automatically mount the folder in the guest. A drive letter (e.g. 'G:') for Windows and OS/2 guests, path for the others. If left empty the guest will pick something fitting. Add Share Edit Share UIMachineSettingsSerial When checked, enables the given serial port of the virtual machine. &Enable Serial Port Port &Number: Selects the serial port number. You can choose one of the standard serial ports or select User-defined and specify port parameters manually. &IRQ: I/O Po&rt: Port &Mode: Holds the IRQ number of this serial port. This should be a whole number between <tt>0</tt> and <tt>255</tt>. Values greater than <tt>15</tt> may only be used if the I/O APIC setting is enabled for this virtual machine. Holds the base I/O port address of this serial port. Valid values are integer numbers in range from <tt>0</tt> to <tt>0xFFFF</tt>. &Connect to existing pipe/socket &Path/Address: In Host Pipe mode: Holds the path to the serial port's pipe on the host. Examples: "\\.\pipe\myvbox" or "/tmp/myvbox", for Windows and UNIX-like systems respectively.In Host Device mode: Holds the host serial device name. Examples: "COM1" or "/dev/ttyS0".In Raw File mode: Holds the file-path on the host system, where the serial output will be dumped.In TCP mode: Holds the TCP "port" when in server mode, or "hostname:port" when in client mode. Selects the working mode of this serial port. If you select Disconnected, the guest OS will detect the serial port but will not be able to operate it. When checked, the virtual machine will assume that the pipe or socket specified in the Path/Address field exists and try to use it. Otherwise, the pipe or socket will be created by the virtual machine when it starts. Port %1 serial ports No IRQ is currently specified. No I/O port is currently specified. Two or more ports have the same settings. No port path is currently specified. There are currently duplicate port paths specified. UIMachineSettingsStorage Information The Storage Tree can contain several controllers of different types. This machine currently has no controllers. Attributes &Name: &Type: Selects the sub-type of the storage controller currently selected in the Storage Tree. Selects the slot on the storage controller used by this attachment. The available slots depend on the type of the controller and other attachments on it. When checked, allows the guest to send ATAPI commands directly to the host-drive which makes it possible to use CD/DVD writers connected to the host inside the VM. Note that writing audio CD inside the VM is not yet supported. &Passthrough Virtual Size: Actual Size: Size: Location: Type (Format): Attached to: Use Host I/O Cache Type: &Live CD/DVD &Solid-state Drive Details: &Port Count: Selects the port count of the SATA storage controller currently selected in the Storage Tree. This must be at least one more than the highest port number you need to use. Controller: %1 &Hot-pluggable Encrypted with key: Holds the name of the storage controller currently selected in the Storage Tree. When checked, allows to use host I/O caching capabilities. When checked, the virtual disk will not be removed when the guest system ejects it. When checked, the guest system will see the virtual disk as a solid-state device. When checked, the guest system will see the virtual disk as a hot-pluggable device. &Storage Devices Remove disk from virtual drive %1 Bus:  %2 Type:  %3 Host Drive Image storage image Expands/Collapses item. Adds hard disk. Adds optical drive. Adds floppy drive. No name is currently specified for the controller at position %1. The controller at position %1 has the same name as the controller at position %2. No hard disk is selected for %1. %1 is using a disk that is already attached to %2. at most one supported controller up to %1 supported controllers The machine currently has more storage controllers assigned than a %1 chipset supports. Please change the chipset type on the System settings page or reduce the number of the following storage controllers on the Storage settings page: %2 Lists all storage controllers for this machine and the virtual images and host drives attached to them. Add Controller Remove Controller Add Attachment Remove Attachment Adds new storage controller. Removes selected storage controller. Adds new storage attachment. Removes selected storage attachment. Hard &Disk: Choose or create a virtual hard disk file. The virtual machine will see the data in the file as the contents of the virtual hard disk. Optical &Drive: Choose a virtual optical disk or a physical drive to use with the virtual drive. The virtual machine will see a disk inserted into the drive with the data in the file or on the disk in the physical drive as its contents. Floppy &Drive: Choose a virtual floppy disk or a physical drive to use with the virtual drive. The virtual machine will see a disk inserted into the drive with the data in the file or on the disk in the physical drive as its contents. Remove Disk from Virtual Drive PIIX3 (IDE) PIIX4 (Default IDE) ICH6 (IDE) AHCI (SATA) LsiLogic (Default SCSI) BusLogic (SCSI) LsiLogic SAS (SAS) I82078 (Floppy) USB NVMe (PCIe) virtio-scsi Hard Disk Optical Drive Floppy Drive Choose/Create a Virtual Hard Disk... Choose a disk file... Choose/Create a Virtual Optical Disk... Choose/Create a Virtual Floppy Disk... Choose/Create a disk image... UIMachineSettingsSystem &Motherboard Base &Memory: Controls the amount of memory provided to the virtual machine. If you assign too much, the machine might not start. &Boot Order: Defines the boot device order. Use the checkboxes on the left to enable or disable individual boot devices. Move items up and down to change the device order. Extended Features: When checked, the virtual machine will support the Input Output APIC (I/O APIC), which may slightly decrease performance. Note: don't disable this feature after having installed a Windows guest operating system! Enable &I/O APIC &Processor &Processor(s): When checked, the Physical Address Extension (PAE) feature of the host CPU will be exposed to the virtual machine. Enable PA&E/NX Acce&leration Hardware Virtualization: When checked, the virtual machine will try to make use of the host CPU's hardware virtualization extensions such as Intel VT-x and AMD-V. Enable &VT-x/AMD-V When checked, the virtual machine will try to make use of the nested paging extension of Intel VT-x and AMD-V. Enable Nested Pa&ging When checked, the guest will support the Extended Firmware Interface (EFI), which is required to boot certain guest OSes. Non-EFI aware OSes will not be able to boot if this option is activated. Enable &EFI (special OSes only) Hardware Clock in &UTC Time Controls the number of virtual CPUs in the virtual machine. You need hardware virtualization support on your host system to use more than one virtual CPU. &Chipset: Selects the chipset to be emulated in this virtual machine. Note that the ICH9 chipset emulation is experimental and not recommended except for guest systems (such as Mac OS X) which require it. &Execution Cap: Limits the amount of time that each virtual CPU is allowed to run for. Each virtual CPU will be allowed to use up to this percentage of the processing time available on one physical CPU. The execution cap can be disabled by setting it to 100%. Setting the cap too low can make the machine feel slow to respond. &Pointing Device: Determines whether the emulated pointing device is a standard PS/2 mouse, a USB tablet or a USB multi-touch tablet. &Paravirtualization Interface: Selects the paravirtualization guest interface provider to be used by this virtual machine. When checked, the RTC device will report the time in UTC, otherwise in local (host) time. Unix usually expects the hardware clock to be set to UTC. % More than %1% of the host computer's memory (%2) is assigned to the virtual machine. Not enough memory is left for the host operating system. Please select a smaller amount. More than %1% of the host computer's memory (%2) is assigned to the virtual machine. There might not be enough memory left for the host operating system. Please consider selecting a smaller amount. The I/O APIC feature is not currently enabled in the Motherboard section of the System page. This is needed to support a chipset of type ICH9. It will be enabled automatically if you confirm your changes. The USB controller emulation is not currently enabled on the USB page. This is needed to support an emulated USB pointing device. It will be enabled automatically if you confirm your changes. For performance reasons, the number of virtual CPUs attached to the virtual machine may not be more than twice the number of physical CPUs on the host (%1). Please reduce the number of virtual CPUs. More virtual CPUs are assigned to the virtual machine than the number of physical CPUs on the host system (%1). This is likely to degrade the performance of your virtual machine. Please consider reducing the number of virtual CPUs. The I/O APIC feature is not currently enabled in the Motherboard section of the System page. This is needed to support more than one virtual processor. It will be enabled automatically if you confirm your changes. The hardware virtualization is not currently enabled in the Acceleration section of the System page. This is needed to support more than one virtual processor. It will be enabled automatically if you confirm your changes. The processor execution cap is set to a low value. This may make the machine feel slow to respond. Please consider lowering the number of CPUs assigned to the virtual machine rather than setting the processor execution cap. Lowering the processor execution cap may result in a decline in performance. The hardware virtualization is enabled in the Acceleration section of the System page although it is not supported by the host system. It should be disabled in order to start the virtual system. %1 CPU %1 is 1 for now %1 CPUs %1 is host cpu count * 2 for now %1% When checked, the nested hardware virtualization CPU feature will be exposed to the virtual machine. Enable Nested &VT-x/AMD-V The hardware virtualization is not currently enabled in the Acceleration section of the System page. This is needed to support nested hardware virtualization. It will be enabled automatically if you confirm your changes. The nested paging is not currently enabled in the Acceleration section of the System page. This is needed to support nested hardware virtualization. It will be enabled automatically if you confirm your changes. The hardware virtualization is not currently enabled in the Acceleration section of the System page. This is needed for nested paging support. It will be enabled automatically if you confirm your changes. UIMachineSettingsUSB When checked, enables the virtual USB controller of this machine. Enable &USB Controller USB Device &Filters Lists all USB filters of this machine. The checkbox to the left defines whether the particular filter is enabled or not. Use the context menu or buttons to the right to add or remove USB filters. [filter] USB &1.1 (OHCI) Controller USB &3.0 (xHCI) Controller When chosen, enables the virtual USB OHCI controller of this machine. The USB OHCI controller provides USB 1.0 support. When chosen, enables the virtual USB xHCI controller of this machine. The USB xHCI controller provides USB 3.0 support. USB 2.0/3.0 is currently enabled for this virtual machine. However, this requires the %1 to be installed. Please install the Extension Pack from the VirtualBox download site or disable USB 2.0/3.0 to be able to start the machine. Add Empty Filter Add Filter From Device Edit Filter Remove Filter Move Filter Up Move Filter Down Adds new USB filter with all fields initially set to empty strings. Note that such a filter will match any attached USB device. Adds new USB filter with all fields set to the values of the selected USB device attached to the host PC. Edits selected USB filter. Removes selected USB filter. Moves selected USB filter up. Moves selected USB filter down. New Filter %1 usb When chosen, enables the virtual USB OHCI and EHCI controllers of this machine. Together they provide USB 2.0 support. USB &2.0 (OHCI + EHCI) Controller UIMachineSettingsUSBFilterDetails &Name: Holds the filter name. &Vendor ID: &Product ID: &Revision: &Manufacturer: Pro&duct: &Serial No.: Por&t: R&emote: USB Filter Details Holds the vendor ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value. Holds the product ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value. Holds the revision number filter. The exact match string format is <tt>IIFF</tt> where <tt>I</tt> is a decimal digit of the integer part and <tt>F</tt> is a decimal digit of the fractional part. An empty string will match any value. Holds the manufacturer filter as an exact match string. An empty string will match any value. Holds the product name filter as an exact match string. An empty string will match any value. Holds the serial number filter as an exact match string. An empty string will match any value. Holds the host USB port filter as an exact match string. An empty string will match any value. Holds whether this filter applies to USB devices attached locally to the host computer (No), to a VRDP client's computer (Yes), or both (Any). Any remote Yes remote No remote UIMachineWindow EXPERIMENTAL build %1r%2 - %3 UIMachineWindowNormal Shows the currently assigned Host key. This key, when pressed alone, toggles the keyboard and mouse capture state. It can also be used in combination with other keys to quickly perform actions from the main menu. UIMediumDetailsWidget &Attributes &Information &Type: &Location: &Description: &Size: Holds the type of this medium. Holds the location of this medium. Holds the description of this medium. Holds the size of this medium. Reset Apply Reset changes in current medium details Apply changes in current medium details Reset Changes (%1) Apply Changes (%1) Cannot change medium size from %1 to %2 as storage shrinking is currently not implemented. Choose Medium Location Location can not be empty. This type of medium is attached directly or indirectly, preserved when taking snapshots. This type of medium is attached indirectly, changes are wiped out the next time the virtual machine is started. This type of medium is attached directly, ignored when taking snapshots. This type of medium is attached directly, allowed to be used concurrently by several machines. This type of medium is attached directly, and can be used by several machines. This type of medium is attached indirectly, so that one base medium can be used for several VMs which have their own differencing medium to store their modifications. UIMediumItem Current extension (*.%1) Choose the location of this medium %1, %2: %3, %4: %5 col.1 text, col.2 name: col.2 text, col.3 name: col.3 text Format: Storage details: Attached to: Encrypted with key: UUID: Not Attached Not Encrypted -- no info Moving medium ... Removing medium ... UIMediumManager &Optical disks &Floppy disks &Hard disks Name Virtual Size Actual Size Size Checking accessibility Virtual Media Manager Reset Apply Close Reset changes in current medium details Apply changes in current medium details Close dialog without saving Reset Changes (%1) Apply Changes (%1) Close Window (%1) Current extension (*.%1) Choose the location of this medium Moving medium ... Resizing medium ... UIMediumSearchWidget Search By Name Search By UUID Select the search type UIMediumSelector &Add... Add Disk Image Add existing disk image file &Create... Create Disk Image Create new disk image file &Refresh Refresh Disk Image Files (%1) Refresh the list of disk image files Choose Name Virtual Size Actual Size Medium Expand All Collapse All Cancel Leave Empty Optical Disk Selector Floppy Disk Selector Hard Disk Selector Virtual Medium Selector UIMediumSizeEditor Holds the size of this medium. %1 (%2 B) UIMenuBarEditorWidget Toggle menu %1 Popup menu %1 Close Enable Menu Bar Virtual Screen Resize Virtual Screen Remap Virtual Screen Rescale Switch UIMessageCenter VirtualBox - Information msg box title VirtualBox - Question msg box title VirtualBox - Warning msg box title VirtualBox - Error msg box title VirtualBox - Critical Error msg box title Unknown option %1. %1 is an option for the VirtualBox VM runner (VirtualBoxVM) application, not the VirtualBox Manager. You seem to have the USBFS filesystem mounted at /sys/bus/usb/drivers. We strongly recommend that you change this, as it is a severe mis-configuration of your system which could cause USB devices to fail in unexpected ways. Cannot start the VirtualBox Manager due to local restrictions.The application will now terminate. You must specify a machine to start, using the command line.%1 There will be a usage text passed as argument. <tr><td>Usage: VirtualBoxVM --startvm <name|UUID></td></tr><tr><td>Starts the VirtualBox virtual machine with the given name or unique identifier (UUID).</td></tr> You are running a prerelease version of VirtualBox. This version is not suitable for production use. You are running an EXPERIMENTAL build of VirtualBox. This version is not suitable for production use. Failed to initialize COM because the VirtualBox global configuration directory %1 is not accessible. Please check the permissions of this directory and of its parent directory.The application will now terminate. Failed to initialize COM or to find the VirtualBox COM server. Most likely, the VirtualBox server is not running or failed to start.The application will now terminate. Failed to create the VirtualBoxClient COM object.The application will now terminate. Failed to acquire the VirtualBox COM object.The application will now terminate. The reason for this error are most likely wrong permissions of the IPC daemon socket due to an installation problem. Please check the permissions of '/tmp' and '/tmp/.vbox-*-ipc/' Could not find a language file for the language %1 in the directory %2.The language will be temporarily reset to the system default language. Please go to the Preferences window which you can open from the File menu of the VirtualBox Manager window, and select one of the existing languages on the Language page. Could not load the language file %1. The language will be temporarily reset to English (built-in). Please go to the Preferences window which you can open from the File menu of the VirtualBox Manager window, and select one of the existing languages on the Language page. There is no virtual machine named %1. There is no virtual machine with the identifier %1. Failed to create a new session. Failed to open a session for the virtual machine %1. Failed to access the disk image file %1. Failed to open <tt>%1</tt>. Make sure your desktop environment can properly handle URLs of this type. Failed to set the global VirtualBox extra data for key %1 to value {%2}. Failed to set the extra data for key %1 of machine %2 to value {%3}. Encryption password for ID = '%1' is invalid. Failed to open virtual machine located in %1. Failed to add virtual machine %1 located in %2 because its already present. You are trying to move machine %1 to group %2 which already have sub-group %1.Please resolve this name-conflict and try again. You are trying to move group %1 to group %2 which already have another item with the same name.Would you like to automatically rename it? Rename Failed to set groups of the virtual machine %1. You are about to remove following virtual machine items from the machine list:%1Do you wish to proceed? Remove You are about to remove following inaccessible virtual machines from the machine list:%1Do you wish to proceed? You are about to remove following virtual machines from the machine list:%1Would you like to delete the files containing the virtual machine from your hard disk as well? Doing this will also remove the files containing the machine's virtual hard disks if they are not in use by another machine. You are about to remove following virtual machines from the machine list:%1Would you like to delete the files containing the virtual machine from your hard disk as well? Delete all files Remove only Failed to remove the virtual machine %1. One or more disk image files are not currently accessible. As a result, you will not be able to operate virtual machines that use these files until they become accessible later.Press Check to open the Virtual Media Manager window and see which files are inaccessible, or press Ignore to ignore this message. Check inaccessible media message box Ignore Are you sure you want to discard the saved state of the following virtual machines?%1This operation is equivalent to resetting or powering off the machine without doing a proper shutdown of the guest OS. Discard saved state Do you really want to reset the following virtual machines?%1This will cause any unsaved data in applications running inside it to be lost. Reset machine Do you really want to send an ACPI shutdown signal to the following virtual machines?%1 ACPI Shutdown machine Do you really want to power off the following virtual machines?%1This will cause any unsaved data in applications running inside it to be lost. Power Off machine Failed to pause the execution of the virtual machine %1. Failed to resume the execution of the virtual machine %1. Failed to discard the saved state of the virtual machine %1. Failed to save the state of the virtual machine %1. Failed to send the ACPI Power Button press event to the virtual machine %1. Failed to stop the virtual machine %1. You are about to start all of the following virtual machines:%1This could take some time and consume a lot of host system resources. Do you wish to proceed? Failed to move the virtual machine %1. You are about to restore snapshot %1.You can create a snapshot of the current state of the virtual machine first by checking the box below; if you do not do this the current state will be permanently lost. Do you wish to proceed? Create a snapshot of the current machine state Restore Cancel Are you sure you want to restore snapshot %1? Deleting the snapshot will cause the state information saved in it to be lost, and storage data spread over several image files that VirtualBox has created together with the snapshot will be merged into one file. This can be a lengthy process, and the information in the snapshot cannot be recovered.Are you sure you want to delete the selected snapshot %1? Delete Deleting the snapshot %1 will temporarily need more storage space. In the worst case the size of image %2 will grow by %3, however on this filesystem there is only %4 free.Running out of storage space during the merge operation can result in corruption of the image and the VM configuration, i.e. loss of the VM and its data.You may continue with deleting the snapshot at your own risk. Failed to create a snapshot of the virtual machine %1. Failed to restore the snapshot %1 of the virtual machine %2. Failed to delete the snapshot %1 of the virtual machine %2. Failed to change the snapshot %1 of the virtual machine %2. Can't find snapshot named %1. Can't find snapshot with ID=%1. Can't acquire snapshot attributes. Failed to save the settings. Do you want to remove the NAT network %1?If this network is in use by one or more virtual machine network adapters these adapters will no longer be usable until you correct their settings by either choosing a different network name or a different adapter attachment type. Failed to set global VirtualBox properties. Failed to access the USB subsystem. The virtual machine that you are changing has been started. Only certain settings can be changed while a machine is running. All other changes will be lost if you close this window now. The machine settings were changed while you were editing them. You currently have unsaved setting changes.Would you like to reload the changed settings or to keep your own changes? Reload settings Keep changes Are you sure you want to delete the optical drive?You will not be able to insert any optical disks or ISO images or install the Guest Additions without it! &Remove medium Failed to attach the hard disk (%1) to the slot %2 of the machine %3. Failed to attach the optical drive (%1) to the slot %2 of the machine %3. Failed to attach the floppy drive (%1) to the slot %2 of the machine %3. The current port forwarding rules are not valid. None of the host or guest port values may be set to zero. The current port forwarding rules are not valid. All of the host or guest address values should be correct or empty. The current port forwarding rules are not valid. None of the guest address values may be empty. The current port forwarding rules are not valid. Rule names should be unique. The current port forwarding rules are not valid. Few rules have same host ports and conflicting IP addresses. There are unsaved changes in the port forwarding configuration.If you proceed your changes will be discarded. Failed to save the settings of the virtual machine %1 to %2. Error changing disk image mode from %1 to %2. Failed to move the storage unit of the disk image %1 to %2. Error changing the description of the disk image %1. Are you sure you want to release the disk image file %1?This will detach it from the following virtual machine(s): %2. Release detach medium The changes you requested require this disk to be released from the machines it is attached to.Are you sure you want to release the disk image file %1?This will detach it from the following virtual machine(s): %2. Are you sure you want to remove the virtual hard disk %1 from the list of known disk image files? As this hard disk is inaccessible its image file can not be deleted. Are you sure you want to remove the virtual optical disk %1 from the list of known disk image files? Note that the storage unit of this medium will not be deleted and that it will be possible to use it later again. Are you sure you want to remove the virtual floppy disk %1 from the list of known disk image files? Remove medium Do you want to delete the storage unit of the virtual hard disk %1?If you select Delete then the specified storage unit will be permanently deleted. This operation cannot be undone.If you select Keep then the hard disk will be only removed from the list of known hard disks, but the storage unit will be left untouched which makes it possible to add this hard disk to the list later again. Delete hard disk storage Keep hard disk storage Failed to delete the storage unit of the hard disk %1. Failed to resize the storage unit of the hard disk %1 from %2 to %3. Failed to detach the hard disk (%1) from the slot %2 of the machine %3. Failed to detach the optical drive (%1) from the slot %2 of the machine %3. Failed to detach the floppy drive (%1) from the slot %2 of the machine %3. Unable to insert the virtual optical disk %1 into the machine %2. Would you like to try to force insertion of this disk? Unable to eject the virtual optical disk %1 from the machine %2. Would you like to try to force ejection of this disk? Unable to insert the virtual floppy disk %1 into the machine %2. Unable to eject the virtual floppy disk %1 from the machine %2. Force Unmount Failed to open the disk image file %1. Failed to close the disk image file %1. Deleting this host-only network will remove the host-only interface this network is based on. Do you want to remove the (host-only network) interface %1?Note: this interface may be in use by one or more virtual network adapters belonging to one of your VMs. After it is removed, these adapters will no longer be usable until you correct their settings by either choosing a different interface name or a different adapter attachment type. Failed to acquire host network interfaces. Unable to find the host network interface %1. Failed to create a host network interface. Failed to remove the host network interface %1. Failed to acquire host network interface parameter. Failed to save host network interface parameter. Failed to create a DHCP server for the network interface %1. Failed to remove the DHCP server for the network interface %1. Failed to acquire DHCP server parameter. Failed to save DHCP server parameter. Failed to acquire cloud provider manager. Failed to acquire cloud provider manager parameter. Failed to find cloud provider with following uuid: %1. Failed to acquire cloud provider parameter. Failed to find cloud profile with following name: %1. Failed to create cloud profile. Failed to save cloud profiles. Failed to import cloud profiles. Failed to acquire cloud profile parameter. Failed to assign cloud profile parameter. Failed to create cloud client. Failed to acquire cloud client parameter. Do you want to remove the cloud profile %1? Do you want to import cloud profiles from external files?VirtualBox cloud profiles will be overwritten and their data will be lost. Import You are about to create a new virtual machine without a hard disk. You will not be able to install an operating system on the machine until you add one. In the mean time you will only be able to start the machine using a virtual optical disk or from the network. Continue no hard disk attached Go Back no hard disk attached Failed to create a new virtual machine. Failed to register the virtual machine %1. Failed to clone the virtual machine %1. The hard disk storage unit at location %1 already exists. You cannot create a new virtual hard disk that uses this location because it can be already used by another virtual hard disk.Please specify a different location. Failed to create the hard disk storage %1. Failed to create the hard disk storage %1. FAT file systems have 4GB file size limit. Failed to create the virtual disk image storage %1. Cannot remove the machine folder %1.Please check that this folder really exists and that you have permissions to remove it. Cannot create the machine folder %1 in the parent folder %2.This folder already exists and possibly belongs to another machine. Cannot create the machine folder %1 in the parent folder %2.Please check that the parent really exists and that you have permissions to create the machine folder. Failed to open/interpret appliance %1. Failed to import appliance %1. Failed to check files. Failed to remove file. The %n following virtual machine(s) are currently in a saved state: %1If you continue the runtime state of the exported machine(s) will be discarded. The other machine(s) will not be changed. This text is never used with n == 0. Feel free to drop the %n where possible, we only included it because of problems with Qt Linguist (but the user can see how many machines are in the list and doesn't need to be told). Continue Failed to prepare the export of the appliance %1. Failed to export appliance %1. Bad password or authentication failure. Fatal Error runtime error info Non-Fatal Error runtime error info Warning runtime error info Error ID: runtime error info Severity: runtime error info A fatal error has occurred during virtual machine execution! The virtual machine will be powered off. Please copy the following error message using the clipboard to help diagnose the problem: An error has occurred during virtual machine execution! The error details are shown below. You may try to correct the error and resume the virtual machine execution. A critical error has occurred while running the virtual machine and the machine execution has been stopped.For help, please see the Community section on <a href=https://www.virtualbox.org>https://www.virtualbox.org</a> or your support contract. Please provide the contents of the log file <tt>VBox.log</tt> and the image file <tt>VBox.png</tt>, which you can find in the %1 directory, as well as a description of what you were doing when this error happened. Note that you can also access the above files by selecting Show Log from the Machine menu of the main VirtualBox window.Press OK if you want to power off the machine or press Ignore if you want to leave it as is for debugging. Please note that debugging requires special knowledge and tools, so it is recommended to press OK now. A critical error has occurred while running the virtual machine and the machine execution should be stopped.For help, please see the Community section on <a href=https://www.virtualbox.org>https://www.virtualbox.org</a> or your support contract. Please provide the contents of the log file <tt>VBox.log</tt>, which you can find in the virtual machine log directory, as well as a description of what you were doing when this error happened. Note that you can also access the above file by selecting Show Log from the Machine menu of the main VirtualBox window.Press OK to power off the machine. VT-x/AMD-V hardware acceleration has been enabled, but is not operational. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot.Please ensure that you have enabled VT-x/AMD-V properly in the BIOS of your host computer. Close VM VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. VT-x/AMD-V hardware acceleration has been enabled, but is not operational. Certain guests (e.g. OS/2 and QNX) require this feature.Please ensure that you have enabled VT-x/AMD-V properly in the BIOS of your host computer. VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it. Could not start the machine %1 because the following physical network interfaces were not found:%2You can either change the machine's network settings or stop the machine. Change Network Settings Failed to start the virtual machine %1. You have clicked the mouse inside the Virtual Machine display or pressed the host key. This will cause the Virtual Machine to capture the host mouse pointer (only if the mouse pointer integration is not currently supported by the guest OS) and the keyboard, which will make them unavailable to other applications running on your host machine.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=:/hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. The host key is currently defined as %1. additional message box paragraph Capture do input capture The virtual machine window will be now switched to full-screen mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in full-screen mode. You can access it by pressing Host+Home. Switch The virtual machine window will be now switched to Seamless mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in seamless mode. You can access it by pressing Host+Home. The virtual machine window will be now switched to Scale mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in scaled mode. You can access it by pressing Host+Home. Could not switch the guest display to full-screen mode due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory.Press Ignore to switch to full-screen mode anyway or press Cancel to cancel the operation. Could not enter seamless mode due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory. Could not change the guest screen to this host screen due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory.Press Ignore to switch the screen anyway or press Cancel to cancel the operation. Could not change the guest screen to this host screen due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory. Do you wish to cancel all current network operations? A new version of VirtualBox has been released! Version %1 is available at <a href="https://www.virtualbox.org/">virtualbox.org</a>.You can download this version using the link:<a href=%2>%3</a> You are already running the most recent version of VirtualBox. You have version %1 of the %2 installed.You should download and install version %3 of this extension pack from Oracle! Could not find the VirtualBox Guest Additions disk image file.Do you wish to download this disk image file from the Internet? Download Are you sure you want to download the VirtualBox Guest Additions disk image file from <a href="%1">%1</a> (size %2 bytes)? The VirtualBox Guest Additions disk image file has been successfully downloaded from <a href="%1">%1</a> but can't be saved locally as %2.Please choose another location for that file. The VirtualBox Guest Additions disk image file has been successfully downloaded from <a href="%1">%1</a> and saved locally as %2.Do you wish to register this disk image file and insert it into the virtual optical drive? Insert additions The VirtualBox Guest Additions disk image file has been successfully downloaded from <a href="%1">%1</a> and saved locally as %2, but the SHA-256 checksum verification failed.Please do the download, installation and verification manually. Failed to update Guest Additions. The Guest Additions disk image file will be inserted for user installation. Could not find the VirtualBox User Manual %1.Do you wish to download this file from the Internet? Are you sure you want to download the VirtualBox User Manual from <a href="%1">%1</a> (size %2 bytes)? The VirtualBox User Manual has been successfully downloaded from <a href="%1">%1</a> but can't be saved locally as %2.Please choose another location for that file. The VirtualBox User Manual has been successfully downloaded from <a href="%1">%1</a> and saved locally as %2. You have an old version (%1) of the %2 installed.Do you wish to download latest one from the Internet? Are you sure you want to download the %1 from <a href="%2">%2</a> (size %3 bytes)? The %1 has been successfully downloaded from <a href="%2">%2</a> but can't be saved locally as %3.Please choose another location for that file. The %1 has been successfully downloaded from <a href="%2">%2</a> and saved locally as %3.Do you wish to install this extension pack? Install extension pack The %1 has been successfully downloaded from <a href="%2">%2</a> and saved locally as %3, but the SHA-256 checksum verification failed.Please do the download, installation and verification manually. Do you want to delete the downloaded file %1? Delete extension pack Do you want to delete following list of files %1? You are about to install a VirtualBox extension pack. Extension packs complement the functionality of VirtualBox and can contain system level software that could be potentially harmful to your system. Please review the description below and only proceed if you have obtained the extension pack from a trusted source.<table cellpadding=0 cellspacing=5><tr><td>Name:  </td><td>%1</td></tr><tr><td>Version:  </td><td>%2</td></tr><tr><td>Description:  </td><td>%3</td></tr></table> Extension packs complement the functionality of VirtualBox and can contain system level software that could be potentially harmful to your system. Please review the description below and only proceed if you have obtained the extension pack from a trusted source. An older version of the extension pack is already installed, would you like to upgrade? %1<table cellpadding=0 cellspacing=5><tr><td>Name:  </td><td>%2</td></tr><tr><td>New Version:  </td><td>%3</td></tr><tr><td>Current Version:  </td><td>%4</td></tr><tr><td>Description:  </td><td>%5</td></tr></table> &Upgrade An newer version of the extension pack is already installed, would you like to downgrade? %1<table cellpadding=0 cellspacing=5><tr><td>Name:  </td><td>%2</td></tr><tr><td>New Version:  </td><td>%3</td></tr><tr><td>Current Version:  </td><td>%4</td></tr><tr><td>Description:  </td><td>%5</td></tr></table> &Downgrade The extension pack is already installed with the same version, would you like reinstall it? %1<table cellpadding=0 cellspacing=5><tr><td>Name:  </td><td>%2</td></tr><tr><td>Version:  </td><td>%3</td></tr><tr><td>Description:  </td><td>%4</td></tr></table> &Reinstall You are about to remove the VirtualBox extension pack %1.Are you sure you want to proceed? &Remove Failed to open the Extension Pack %1. Failed to install the Extension Pack %1. Failed to uninstall the Extension Pack %1. The extension pack %1 was installed successfully. Drag and drop operation from host to guest failed. Unable to cancel host to guest drag and drop operation. Drag and drop operation from guest to host failed. Failed to open the license file %1. Check file permissions. A file named %1 already exists. Are you sure you want to replace it? Replacing it will overwrite its contents. The following files already exist: %1 Are you sure you want to replace them? Replacing them will overwrite their contents. Could not load the Host USB Proxy Service (VERR_FILE_NOT_FOUND). The service might not be installed on the host computer VirtualBox is not currently allowed to access USB devices. You can change this by adding your user to the 'vboxusers' group. Please see the user manual for a more detailed explanation VirtualBox is not currently allowed to access USB devices. You can change this by allowing your user to access the 'usbfs' folder and files. Please see the user manual for a more detailed explanation The USB Proxy Service has not yet been ported to this host Could not load the Host USB Proxy service Do not show this message again msg box flag Close Ok You are trying to shut down the guest with the ACPI power button. This is currently not possible because the guest does not support software shutdown. You have the Auto capture keyboard option turned on. This will cause the Virtual Machine to automatically capture the keyboard every time the VM window is activated and make it unavailable to other applications running on your host machine: when the keyboard is captured, all keystrokes (including system ones like Alt-Tab) will be directed to the VM.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=:/hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. The Virtual Machine reports that the guest OS supports mouse pointer integration. This means that you do not need to capture the mouse pointer to be able to use it in your guest OS -- all mouse actions you perform when the mouse pointer is over the Virtual Machine's display are directly sent to the guest OS. If the mouse is currently captured, it will be automatically uncaptured.The mouse icon on the status bar will look like <img src=:/mouse_seamless_16px.png/> to inform you that mouse pointer integration is supported by the guest OS and is currently turned on.Note: Some applications may behave incorrectly in mouse pointer integration mode. You can always disable it for the current session (and enable it again) by selecting the corresponding action from the menu bar. The Virtual Machine reports that the guest OS does not support mouse pointer integration in the current video mode. You need to capture the mouse (by clicking over the VM display or pressing the host key) in order to use the mouse inside the guest OS. The Virtual Machine is currently in the Paused state and not able to see any keyboard or mouse input. If you want to continue to work inside the VM, you need to resume it by selecting the corresponding action from the menu bar. The virtual screen is currently set to a %1 bit color mode. For better performance please change this to %2 bit. This can usually be done from the Display section of the guest operating system's Control Panel or System Settings. Failed to attach the USB device %1 to the virtual machine %2. Failed to detach the USB device %1 from the virtual machine %2. Failed to attach the webcam %1 to the virtual machine %2. Failed to detach the webcam %1 from the virtual machine %2. Failed to enable recording for the virtual machine %1. Failed to disable recording for the virtual machine %1. Failed to enable the remote desktop server for the virtual machine %1. Failed to disable the remote desktop server for the virtual machine %1. Failed to connect the network adapter cable of the virtual machine %1. Failed to disconnect the network adapter cable of the virtual machine %1. The VirtualBox Guest Additions do not appear to be available on this virtual machine, and shared folders cannot be used without them. To use shared folders inside the virtual machine, please install the Guest Additions if they are not installed, or re-install them if they are not working correctly, by selecting Insert Guest Additions CD image from the Devices menu. If they are installed but the machine is not yet fully started then shared folders will be available once it is. Failed to enable the audio adapter output for the virtual machine %1. Failed to disable the audio adapter output for the virtual machine %1. Failed to enable the audio adapter input for the virtual machine %1. Failed to disable the audio adapter input for the virtual machine %1. Could not insert the %1 disk image file into the virtual machine %2, as the machine has no optical drives. Please add a drive using the storage page of the virtual machine settings window. Do not show this message again Failed to acquire machine parameter. This controller has optical devices attached. You have requested storage bus change to type which doesn't support optical devices.If you proceed optical devices will be removed. This controller has devices attached. You have requested storage bus change to type which supports smaller amount of attached devices.If you proceed excessive devices will be removed. Failed to change the attribute of the virtual machine %1. Failed to change graphics adapter attribute. Failed to change audio adapter attribute. Failed to change network adapter attribute. Failed to open the medium with following ID: %1. Failed to acquire attachment parameter. Failed to acquire medium attribute. Failed to create cloud machine. Failed to assign form value. Cannot create a virtual appliance. Cannot create a virtual system description. Cannot add a virtual system description value. Cannot acquire a virtual system description property. The virtual machine execution ran into a non-fatal problem as described below. We suggest that you take appropriate action to prevent the problem from recurring. UIMiniToolBar Always show the toolbar Minimize Window Exit Full Screen or Seamless Mode Close VM UIMultiScreenLayout Virtual Screen %1 Use Host Screen %1 UINameAndSystemEditor &Type: &Version: Name: Machine Folder: Selects the operating system family that you plan to install into this virtual machine. Selects the operating system type that you plan to install into this virtual machine (called a guest operating system). UINetworkAttachmentEditor &Attached to: &Name: Not selected network adapter name Selects the network adapter on the host system that traffic to and from this network card will go through. Holds the name of the internal network that this network card will be connected to. You can create a new internal network by choosing a name which is not used by any other network cards in this virtual machine or others. Selects the virtual network adapter on the host system that traffic to and from this network card will go through. You can create and remove adapters using the global network settings in the virtual machine manager window. Selects the driver to be used with this network card. Holds the name of the NAT network that this network card will be connected to. You can create and remove networks using the global network settings in the virtual machine manager window. (experimental) Holds the name of the cloud network that this network card will be connected to. You can add and remove cloud networks using the global network settings in the virtual machine manager window. UINetworkManagerDialog Network Operations Manager There are no active network operations. &Cancel All Cancel all active network operations Network Operation Restart network operation Cancel network operation The network operation failed with the following error: %1. UINetworkManagerIndicator Current network operations: failed network operation (%1 of %2) Double-click for more information. UINetworkReplyPrivate %1: %2 Context description: Error description Unable to initialize HTTP library Url not found on the server Host not found Content access denied Protocol failure Connection refused SSL authentication failed Wrong SSL certificate format Content moved Proxy not found Unknown reason UINetworkReplyPrivateThread During proxy configuration During certificate downloading During network request UIPopupCenter Click for full details UIPopupPane Details: Details: (%1 of %2) UIPortForwardingTable Name Protocol Host IP Host Port Guest IP Guest Port Contains a list of port forwarding rules. Add New Rule Copy Selected Rule Remove Selected Rule Adds new port forwarding rule. Copies selected port forwarding rule. Removes selected port forwarding rule. UIProgressDialog &Cancel Cancel the current operation Canceling... %1, %2 remaining You may wish to translate this more like "Time remaining: %1, %2" %1 remaining You may wish to translate this more like "Time remaining: %1" A few seconds remaining UIScaleFactorEditor Max Min All Monitors Monitor %1 Controls the guest screen scale factor. UIScreenshotViewer Screenshot of %1 (%2) Click to view non-scaled screenshot. Click to view scaled screenshot. UISession Updating Guest Additions UISessionStateStatusBarIndicator %1 status-bar indicator like 'hard-disk status-bar indicator' UISettingsDialog Select a settings category from the list on the left-hand side and move the mouse over a settings item to get more information. Invalid settings detected %1 page: %1: %2 page: UISettingsDialogGlobal Allows to navigate through Global Property categories General Input Update Language Display Network Extensions Proxy Preferences VirtualBox - %1 UISettingsDialogMachine Allows to navigate through VM Settings categories General System Display Storage Audio Network Ports Serial Ports USB Shared Folders User Interface Settings %1 - %2 UISettingsSerializerProgress Loading Settings... Saving Settings... UISnapshotDetailsWidget &Attributes &Information &Name: &Description: Holds the snapshot name. Holds the snapshot description. Apply Reset Apply changes in current snapshot details Reset changes in current snapshot details Apply Changes (%1) Reset Changes (%1) Click to enlarge the screenshot. Snapshot name is empty Enter a name for the new snapshot... Enter a name for this snapshot... Take Take snapshot on the basis of current machine state Take Snapshot (%1) UISnapshotItem Current State (changed) Current State (Modified) Current State Current State (Unmodified) The current state differs from the state stored in the current snapshot The current state is identical to the state stored in the current snapshot %1 (%2 ago) date time (how long ago) %1 since %2 Current State (time or date + time) current snapshot online snapshot offline snapshot Taken at %1 Snapshot (time) Taken on %1 Snapshot (date + time) UISnapshotPane Contains the snapshot tree of the current virtual machine Name snapshot Taken snapshot Snapshot %1 UISoftKeyboard Layout Editor Return Back to Layout List Back to Layout List Physical Layout English Name Name of the Layout in English Native Language Name Name of the Layout in the native Language Scan Code The scan code the key produces. Not editable Position The physical position of the key. Not editable Base Shift AltGr ShiftAltGr Captions Selected Key Use the selected layout Edit the selected layout Delete the selected layout Copy the selected layout Save the selected layout into File Layout List Close the layout list Web browser go back Web browser go the home page Web browser go forward Web browser reload the current page Web browser stop loading the page Web browser search Jump back to previous media track Jump to next media track Stop playing Play or pause playing Start email application Start calculator Show 'My Computer' Show Media folder Mute Volume up Volume down Error! Could not create folder under Provide a file name is an invalid file name is saved Copy This will delete the keyboard layout file as well. Proceed? The file has been deleted Deleting the file has failed Settings Reset the keyboard and release all keys Click to change the color. This color theme is not editable. Keyboard Settings Hide NumPad Hide OS/Menu Keys Hide Multimedia Keys Color Themes Button Background Color Button Font Color Button Hover Color Button Edit Color Pressed Button Font Color Soft Keyboard Following layouts are edited/copied but not saved:%1Closing this dialog will cause loosing the changes. Proceed? Layout The file will be saved under: UIStatusBarEditorWidget Click to toggle indicator presence. Drag&Drop to change indicator position. Close Enable Status Bar UITakeSnapshotDialog Snapshot %1 Take Snapshot of Virtual Machine Snapshot &Name Snapshot &Description Warning: You are taking a snapshot of a running machine which has %n immutable image(s) attached to it. As long as you are working from this snapshot the immutable image(s) will not be reset to avoid loss of data. UITextEditor Edit text &Replace... Replaces the current text with the content of a file. Text (*.txt);;All (*.*) Select a file to open... UIToolsModel Welcome Media Network Cloud Details Snapshots Logs UIToolsView Contains a list of VirtualBox tools UIUSBFilterItem %1, Active col.1 text, col.1 state %1 col.1 text Vendor ID: %1 USB filter tooltip Product ID: %2 USB filter tooltip Revision: %3 USB filter tooltip Product: %4 USB filter tooltip Manufacturer: %5 USB filter tooltip Serial No.: %1 USB filter tooltip Port: %1 USB filter tooltip State: %1 USB filter tooltip UIUpdateManager 1 day 2 days 3 days 4 days 5 days 6 days 1 week 2 weeks 3 weeks 1 month Never UIUpdateStepVirtualBox Checking for a new VirtualBox version... UIVMCloseDialog Close Virtual Machine You want to: &Continue running in the background Close the virtual machine windows but keep the virtual machine running.You can use the VirtualBox Manager to return to running the virtual machine in a window. &Save the machine state Saves the current execution state of the virtual machine to the physical hard disk of the host PC.Next time this machine is started, it will be restored from the saved state and continue execution from the same place you saved it at, which will let you continue your work immediately.Note that saving the machine state may take a long time, depending on the guest operating system type and the amount of memory you assigned to the virtual machine. S&end the shutdown signal Sends the ACPI Power Button press event to the virtual machine.Normally, the guest operating system running inside the virtual machine will detect this event and perform a clean shutdown procedure. This is a recommended way to turn off the virtual machine because all applications running inside it will get a chance to save their data and state.If the machine doesn't respond to this action then the guest operating system may be misconfigured or doesn't understand ACPI Power Button events at all. In this case you should select the Power off the machine action to stop virtual machine execution. &Power off the machine Turns off the virtual machine.Note that this action will stop machine execution immediately so that the guest operating system running inside it will not be able to perform a clean shutdown procedure which may result in data loss inside the virtual machine. Selecting this action is recommended only if the virtual machine does not respond to the Send the shutdown signal action. &Restore current snapshot '%1' Restore the machine state stored in the current snapshot When checked, the machine will be returned to the state stored in the current snapshot after it is turned off. This is useful if you are sure that you want to discard the results of your last sessions and start again at that snapshot. UIVMInformationDialog %1 - Session Information Configuration &Details &Runtime Information General System Display Storage Audio Network Serial Ports USB Shared Folders Performance &Monitor No guest additions! This metric requires guest additions to work properly. Reset Show Pie Chart Draw Area Chart Seconds CPU Load Guest Load VMM Load RAM Usage Total Free Used Network Rate Receive Rate Transmit Rate Total Received Total Transmitted Disk IO Rate Write Rate Read Rate Total Written Total Read VM Exits Current Runtime Attributes Screen Resolution VM Uptime Clipboard Mode Drag and Drop Mode VM Execution Engine Nested Paging Unrestricted Execution Paravirtualization Interface Guest Additions Guest OS Type Remote Desktop Server Port &Guest Control turned off Screen Active Nested Paging Inactive Nested Paging Active Unrestricted Execution Inactive Unrestricted Execution Not Available VRDE Port not set Execution Engine Not Detected Guest OS Type Not Detected Guest Additions Version UIVMListView Inaccessible UIVMLogViewerDialog %1 - Log Viewer UIVMLogViewerWidget Delete the current bookmark Delete all bookmarks Log Viewer Close Select or enter a term which will be used in filtering the log text Add the filter term to the set of filter terms Showing %1/%2 The filter terms list, select one to remove or click the button on the right side to remove them all The type of boolean operator for filter operation Show Line Numbers When checked, show line numbers Wrap Lines When checked, wrap lines Font Size Log viewer font size Open a font dialog to select font face for the logviewer Reset options to application defaults Enter a search string here Search for the next occurrence of the string (F3) Search for the previous occurrence of the string (Shift+F3) C&ase Sensitive When checked, perform case sensitive search Ma&tch Whole Word When checked, search matches only complete words &Highlight All When checked, all occurence of the search text are highlighted Filtered Bookmark Save VirtualBox Log As No machine is currently selected or the selected machine is not valid. Please select a Virtual Machine to see its logs No log files found. Press the Refresh button to rescan the log folder %1. Go to the next bookmark Go to the previous bookmark Go to selected bookmark UIVideoMemoryEditor Video &Memory: %1 MB MB UIVirtualBoxManager Manager Note: main window title which is prepended by the product name. Select a virtual machine file Virtual machine files (%1) Select a destination folder to move the selected virtual machine Show Toolbar Text UIVirtualMachineItemCloud Loading ... Up-To-Date %1 Inaccessible Inaccessible VM tooltip (name) Inaccessible UIVirtualMachineItemLocal %1 %2 since %3 Session %4 VM tooltip (name, last state change, session state) %1 Inaccessible since %2 Inaccessible VM tooltip (name, last state change) Inaccessible UIVisoCreator Remove selected file objects from VISO Name Size Change Time Owner Permissions Local Path ISO Path &Options... Show Hidden Objects Create a new directory under the current location Rename the selected object &Configuration... VISO Configuration Manage VISO Configuration Dialog Options Manage Dialog Options VISO Name: Custom VISO options: Close the pane Remove New Directory Reset VISO Creator VISO Remove current option. Add Click to show/hide the tree view Add selected file objects to VISO Reset VISO content. UIWelcomePane <h3>Welcome to VirtualBox!</h3>The left part of application window contains global tools and lists all virtual machines and virtual machine groups on your computer. You can import, add and create new VMs using corresponding toolbar buttons. You can popup a tools of currently selected element using corresponding element button.You can press the %1 key to get instant help, or visit <a href=https://www.virtualbox.org>www.virtualbox.org</a> for more information and latest news. UIWizard &Expert Mode Switch to Expert Mode, a one-page dialog for experienced users. &Guided Mode Switch to Guided Mode, a step-by-step dialog with detailed explanations. UIWizardCloneVD Copy &Dynamically allocated &Fixed size &Split into files of less than 2GB Storage on physical hard disk Copy Virtual Disk Image Disk image file type Please choose the type of file that you would like to use for the new virtual disk image. If you do not need to use it with other virtualization software you can leave this setting unchanged. Please choose whether the new virtual disk image file should grow as it is used (dynamically allocated) or if it should be created at its maximum size (fixed size). A dynamically allocated disk image file will only use space on your physical hard disk as it fills up (up to a maximum fixed size), although it will not shrink again automatically when space on it is freed. A fixed size disk image file may take longer to create on some systems but is often faster to use. You can also choose to split the disk image file into several files of up to two gigabytes each. This is mainly useful if you wish to store the virtual machine on removable USB devices or old systems, some of which cannot handle very large files. Please choose a location for new virtual disk image file New disk image to create Please type the name of the new virtual disk image file into the box below or click on the folder icon to select a different folder to create the file in. Choose a location for new virtual disk image file... %1_copy copied virtual disk image name &New disk image to create Disk image file &type UIWizardCloneVM Linked Base for %1 and %2 Clone Virtual Machine Clone %1 Clone Clone type If you create a Linked clone then a new snapshot will be created in the original virtual machine as part of the cloning process. &Full clone &Linked clone Snapshots Please choose which parts of the snapshot tree should be cloned with the machine. If you choose Current machine state, the new machine will reflect the current state of the original machine and will have no snapshots. If you choose Current snapshot tree branch, the new machine will reflect the current state of the original machine and will have matching snapshots for all snapshots in the tree branch starting at the current state in the original machine. If you choose Everything, the new machine will reflect the current state of the original machine and will have matching snapshots for all snapshots in the original machine. Current &machine state Current &snapshot tree branch &Everything &Full Clone &Linked Clone Please choose the type of clone you wish to create.If you choose Full clone, an exact copy (including all virtual hard disk files) of the original virtual machine will be created.If you choose Linked clone, a new machine will be created, but the virtual hard disk files will be tied to the virtual hard disk files of original machine and you will not be able to move the new virtual machine to a different computer without moving the original as well. Please choose a name and optionally a folder for the new virtual machine. The new machine will be a clone of the machine %1. Name: Path: MAC Address &Policy: Include all network adapter MAC addresses Include only NAT network adapter MAC addresses Generate new MAC addresses for all network adapters Include only NAT network adapter MAC addresses during cloning. Generate new MAC addresses for all network adapters during cloning. Additional Options: Don't change the disk names during cloning. Keep &Disk Names Don't change hardware UUIDs during cloning. Keep &Hardware UUIDs New machine &name and path New machine name and path Include all network adapter MAC addresses during cloning. Additional options UIWizardExportApp Checking files ... Removing files ... Exporting Appliance ... Export Virtual Appliance Restore Defaults Export Virtual machines to export Please select the virtual machines that should be added to the appliance. You can select more than one. Please note that these machines have to be turned off before they can be exported. Appliance settings Appliance &File: Open Virtualization Format Archive (%1) Open Virtualization Format (%1) Write in legacy OVF 0.9 format for compatibility with other virtualization products. Create a Manifest file for automatic data integrity checks on import. This is the descriptive information which will be added to the virtual appliance. You can change it by double clicking on individual lines. Virtual &machines to export Please choose a file to export the virtual appliance to F&ormat: Write in standard OVF 1.0 format. Open Virtualization Format 0.9 Open Virtualization Format 1.0 Open Virtualization Format 2.0 Write in new OVF 2.0 format. Please choose a format to export the virtual appliance to.The Open Virtualization Format supports only ovf or ova extensions. If you use the ovf extension, several files will be written separately. If you use the ova extension, all the files will be combined into one Open Virtualization Format archive.The Oracle Cloud Infrastructure format supports exporting to remote cloud servers only. Main virtual disk of each selected machine will be uploaded to remote server. Choose a file to export the virtual appliance to... Export to cloud service provider. MAC Address &Policy: Include all network adapter MAC addresses Include only NAT network adapter MAC addresses Strip all network adapter MAC addresses Include all network adapter MAC addresses in exported appliance archive. Include only NAT network adapter MAC addresses in exported appliance archive. Strip all network adapter MAC addresses from exported appliance archive. Additionally: &Write Manifest file Include ISO image files in exported VM archive. &Include ISO image files &Account: Please choose a filename to export the virtual appliance to. Besides that you can specify a certain amount of options which affects the size and content of resulting archive. Virtual system settings Virtual &system settings Include ISO image files into exported VM archive. Please choose one of cloud service accounts you have registered to export virtual machines to. Make sure profile settings reflected in the underlying table are valid. They will be used to establish network connection required to upload your virtual machine files to a remote cloud facility. Machine Creation: Ask me about it &after exporting disk as custom image Ask me about it &before exporting disk as custom image Do &not ask me about it, leave custom image for future usage This is the descriptive information which will be used to determine settings for a cloud storage your VM being exported to. You can change it by double clicking on individual lines. Acquire export form ... UIWizardFirstRun Select start-up disk Start Please select a virtual optical disk file or a physical optical drive containing a disk to start your new virtual machine from.The disk should be suitable for starting a computer from and should contain the operating system you wish to install on the virtual machine if you want to do that now. The disk will be ejected from the virtual drive automatically next time you switch the virtual machine off, but you can also do this yourself if needed using the Devices menu. Please select a virtual optical disk file or a physical optical drive containing a disk to start your new virtual machine from.The disk should be suitable for starting a computer from. As this virtual machine has no hard drive you will not be able to install an operating system on it at the moment. Choose a virtual optical disk file... UIWizardImportApp Restore Defaults Import Appliance to import Open Virtualization Format (%1) Appliance settings These are the virtual machines contained in the appliance and the suggested settings of the imported VirtualBox machines. You can change many of the properties shown by double-clicking on the items and disable others using the check boxes below. Import Virtual Appliance Choose a virtual appliance file to import... Please choose a virtual appliance file to import Appliance is not signed Appliance signed by %1 (trusted) Appliance signed by %1 (expired!) Unverified signature by %1! Self signed by %1 (trusted) Self signed by %1 (expired!) Unverified self signed signature by %1! Importing Appliance ... Local File System Import from local file system. Import from cloud service provider. &File: &Account: &Machines: Please choose one of cloud service accounts you have registered to import virtual machine from. Corresponding machines list will be updated. To continue, select one of machines to import below. Please choose a file to import the virtual appliance from. VirtualBox currently supports importing appliances saved in the Open Virtualization Format (OVF). To continue, select the file to import below. These are the the suggested settings of the cloud VM import procedure, they are influencing the resulting local VM instance. You can change many of the properties shown by double-clicking on the items and disable others using the check boxes below. Source Settings Acquire cloud instances ... Read appliance ... Acquire import form ... Please choose the source to import appliance from. This can be a local file system to import OVF archive or one of known cloud service providers to import cloud VM from. &Source: UIWizardNewCloudVM Create Cloud Machine ... Create Cloud Virtual Machine Create Destination to create Please choose the destination to create cloud virtual machine in. This can be one of known cloud service providers below. Create VM for cloud service provider. Please choose one of cloud service accounts you have registered to create virtual machine for. Existing custom images list will be updated. To continue, select one of custom images to create virtual machine on the basis of it. &Account: &Images: Cloud Virtual Machine settings These are the the suggested settings of the cloud VM creation procedure, they are influencing the resulting cloud VM instance. You can change many of the properties shown by double-clicking on the items and disable others using the check boxes below. Destination Settings Acquire launch form ... Acquire cloud images ... &Destination: UIWizardNewVD Create Virtual Hard Disk Create Hard disk file type Please choose the type of file that you would like to use for the new virtual hard disk. If you do not need to use it with other virtualization software you can leave this setting unchanged. Storage on physical hard disk Please choose whether the new virtual hard disk file should grow as it is used (dynamically allocated) or if it should be created at its maximum size (fixed size). A dynamically allocated hard disk file will only use space on your physical hard disk as it fills up (up to a maximum fixed size), although it will not shrink again automatically when space on it is freed. A fixed size hard disk file may take longer to create on some systems but is often faster to use. You can also choose to split the hard disk file into several files of up to two gigabytes each. This is mainly useful if you wish to store the virtual machine on removable USB devices or old systems, some of which cannot handle very large files. &Dynamically allocated &Fixed size &Split into files of less than 2GB File location and size Please type the name of the new virtual hard disk file into the box below or click on the folder icon to select a different folder to create the file in. Choose a location for new virtual hard disk file... Select the size of the virtual hard disk in megabytes. This size is the limit on the amount of file data that a virtual machine will be able to store on the hard disk. File &location File &size Hard disk file &type UIWizardNewVM Create Virtual Machine Create Name and operating system Memory size Select the amount of memory (RAM) in megabytes to be allocated to the virtual machine.The recommended memory size is %1 MB. &Memory size Hard disk If you wish you can add a virtual hard disk to the new machine. You can either create a new hard disk file or select one from the list or from another location using the folder icon.If you need a more complex storage set-up you can skip this step and make the changes to the machine settings once the machine is created.The recommended size of the hard disk is %1. &Do not add a virtual hard disk &Create a virtual hard disk now &Use an existing virtual hard disk file Choose a virtual hard disk file... Please choose a descriptive name and destination folder for the new virtual machine and select the type of operating system you intend to install on it. The name you choose will be used throughout VirtualBox to identify this machine. VBoxAboutDlg VirtualBox - About VirtualBox Graphical User Interface Version %1 VBoxLicenseViewer VirtualBox License I &Agree I &Disagree VBoxUSBMenu <no devices available> USB devices No supported devices connected to the host PC USB device tooltip