diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/sample.wgetrc | 137 | ||||
| -rw-r--r-- | doc/sample.wgetrc.munged_for_texi_inclusion | 137 |
2 files changed, 274 insertions, 0 deletions
diff --git a/doc/sample.wgetrc b/doc/sample.wgetrc new file mode 100644 index 0000000..c0d0779 --- /dev/null +++ b/doc/sample.wgetrc @@ -0,0 +1,137 @@ +### +### Sample Wget initialization file .wgetrc +### + +## You can use this file to change the default behaviour of wget or to +## avoid having to type many many command-line options. This file does +## not contain a comprehensive list of commands -- look at the manual +## to find out what you can put into this file. You can find this here: +## $ info wget.info 'Startup File' +## Or online here: +## https://www.gnu.org/software/wget/manual/wget.html#Startup-File +## +## Wget initialization file can reside in /usr/local/etc/wgetrc +## (global, for all users) or $HOME/.wgetrc (for a single user). +## +## To use the settings in this file, you will have to uncomment them, +## as well as change them, in most cases, as the values on the +## commented-out lines are the default values (e.g. "off"). +## +## Command are case-, underscore- and minus-insensitive. +## For example ftp_proxy, ftp-proxy and ftpproxy are the same. + + +## +## Global settings (useful for setting up in /usr/local/etc/wgetrc). +## Think well before you change them, since they may reduce wget's +## functionality, and make it behave contrary to the documentation: +## + +# You can set retrieve quota for beginners by specifying a value +# optionally followed by 'K' (kilobytes) or 'M' (megabytes). The +# default quota is unlimited. +#quota = inf + +# You can lower (or raise) the default number of retries when +# downloading a file (default is 20). +#tries = 20 + +# Lowering the maximum depth of the recursive retrieval is handy to +# prevent newbies from going too "deep" when they unwittingly start +# the recursive retrieval. The default is 5. +#reclevel = 5 + +# By default Wget uses "passive FTP" transfer where the client +# initiates the data connection to the server rather than the other +# way around. That is required on systems behind NAT where the client +# computer cannot be easily reached from the Internet. However, some +# firewalls software explicitly supports active FTP and in fact has +# problems supporting passive transfer. If you are in such +# environment, use "passive_ftp = off" to revert to active FTP. +#passive_ftp = off + +# The "wait" command below makes Wget wait between every connection. +# If, instead, you want Wget to wait only between retries of failed +# downloads, set waitretry to maximum number of seconds to wait (Wget +# will use "linear backoff", waiting 1 second after the first failure +# on a file, 2 seconds after the second failure, etc. up to this max). +#waitretry = 10 + + +## +## Local settings (for a user to set in his $HOME/.wgetrc). It is +## *highly* undesirable to put these settings in the global file, since +## they are potentially dangerous to "normal" users. +## +## Even when setting up your own ~/.wgetrc, you should know what you +## are doing before doing so. +## + +# Set this to on to use timestamping by default: +#timestamping = off + +# It is a good idea to make Wget send your email address in a `From:' +# header with your request (so that server administrators can contact +# you in case of errors). Wget does *not* send `From:' by default. +#header = From: Your Name <username@site.domain> + +# You can set up other headers, like Accept-Language. Accept-Language +# is *not* sent by default. +#header = Accept-Language: en + +# You can set the default proxies for Wget to use for http, https, and ftp. +# They will override the value in the environment. +#https_proxy = http://proxy.yoyodyne.com:18023/ +#http_proxy = http://proxy.yoyodyne.com:18023/ +#ftp_proxy = http://proxy.yoyodyne.com:18023/ + +# If you do not want to use proxy at all, set this to off. +#use_proxy = on + +# You can customize the retrieval outlook. Valid options are default, +# binary, mega and micro. +#dot_style = default + +# Setting this to off makes Wget not download /robots.txt. Be sure to +# know *exactly* what /robots.txt is and how it is used before changing +# the default! +#robots = on + +# It can be useful to make Wget wait between connections. Set this to +# the number of seconds you want Wget to wait. +#wait = 0 + +# You can force creating directory structure, even if a single is being +# retrieved, by setting this to on. +#dirstruct = off + +# You can turn on recursive retrieving by default (don't do this if +# you are not sure you know what it means) by setting this to on. +#recursive = off + +# To always back up file X as X.orig before converting its links (due +# to -k / --convert-links / convert_links = on having been specified), +# set this variable to on: +#backup_converted = off + +# To have Wget follow FTP links from HTML files by default, set this +# to on: +#follow_ftp = off + +# To try ipv6 addresses first: +#prefer-family = IPv6 + +# Set default IRI support state +#iri = off + +# Force the default system encoding +#localencoding = UTF-8 + +# Force the default remote server encoding +#remoteencoding = UTF-8 + +# Turn on to prevent following non-HTTPS links when in recursive mode +#httpsonly = off + +# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS) +#secureprotocol = auto diff --git a/doc/sample.wgetrc.munged_for_texi_inclusion b/doc/sample.wgetrc.munged_for_texi_inclusion new file mode 100644 index 0000000..3c7f2f4 --- /dev/null +++ b/doc/sample.wgetrc.munged_for_texi_inclusion @@ -0,0 +1,137 @@ +### +### Sample Wget initialization file .wgetrc +### + +## You can use this file to change the default behaviour of wget or to +## avoid having to type many many command-line options. This file does +## not contain a comprehensive list of commands -- look at the manual +## to find out what you can put into this file. You can find this here: +## $ info wget.info 'Startup File' +## Or online here: +## https://www.gnu.org/software/wget/manual/wget.html#Startup-File +## +## Wget initialization file can reside in /usr/local/etc/wgetrc +## (global, for all users) or $HOME/.wgetrc (for a single user). +## +## To use the settings in this file, you will have to uncomment them, +## as well as change them, in most cases, as the values on the +## commented-out lines are the default values (e.g. "off"). +## +## Command are case-, underscore- and minus-insensitive. +## For example ftp_proxy, ftp-proxy and ftpproxy are the same. + + +## +## Global settings (useful for setting up in /usr/local/etc/wgetrc). +## Think well before you change them, since they may reduce wget's +## functionality, and make it behave contrary to the documentation: +## + +# You can set retrieve quota for beginners by specifying a value +# optionally followed by 'K' (kilobytes) or 'M' (megabytes). The +# default quota is unlimited. +#quota = inf + +# You can lower (or raise) the default number of retries when +# downloading a file (default is 20). +#tries = 20 + +# Lowering the maximum depth of the recursive retrieval is handy to +# prevent newbies from going too "deep" when they unwittingly start +# the recursive retrieval. The default is 5. +#reclevel = 5 + +# By default Wget uses "passive FTP" transfer where the client +# initiates the data connection to the server rather than the other +# way around. That is required on systems behind NAT where the client +# computer cannot be easily reached from the Internet. However, some +# firewalls software explicitly supports active FTP and in fact has +# problems supporting passive transfer. If you are in such +# environment, use "passive_ftp = off" to revert to active FTP. +#passive_ftp = off + +# The "wait" command below makes Wget wait between every connection. +# If, instead, you want Wget to wait only between retries of failed +# downloads, set waitretry to maximum number of seconds to wait (Wget +# will use "linear backoff", waiting 1 second after the first failure +# on a file, 2 seconds after the second failure, etc. up to this max). +#waitretry = 10 + + +## +## Local settings (for a user to set in his $HOME/.wgetrc). It is +## *highly* undesirable to put these settings in the global file, since +## they are potentially dangerous to "normal" users. +## +## Even when setting up your own ~/.wgetrc, you should know what you +## are doing before doing so. +## + +# Set this to on to use timestamping by default: +#timestamping = off + +# It is a good idea to make Wget send your email address in a `From:' +# header with your request (so that server administrators can contact +# you in case of errors). Wget does *not* send `From:' by default. +#header = From: Your Name <username@@site.domain> + +# You can set up other headers, like Accept-Language. Accept-Language +# is *not* sent by default. +#header = Accept-Language: en + +# You can set the default proxies for Wget to use for http, https, and ftp. +# They will override the value in the environment. +#https_proxy = http://proxy.yoyodyne.com:18023/ +#http_proxy = http://proxy.yoyodyne.com:18023/ +#ftp_proxy = http://proxy.yoyodyne.com:18023/ + +# If you do not want to use proxy at all, set this to off. +#use_proxy = on + +# You can customize the retrieval outlook. Valid options are default, +# binary, mega and micro. +#dot_style = default + +# Setting this to off makes Wget not download /robots.txt. Be sure to +# know *exactly* what /robots.txt is and how it is used before changing +# the default! +#robots = on + +# It can be useful to make Wget wait between connections. Set this to +# the number of seconds you want Wget to wait. +#wait = 0 + +# You can force creating directory structure, even if a single is being +# retrieved, by setting this to on. +#dirstruct = off + +# You can turn on recursive retrieving by default (don't do this if +# you are not sure you know what it means) by setting this to on. +#recursive = off + +# To always back up file X as X.orig before converting its links (due +# to -k / --convert-links / convert_links = on having been specified), +# set this variable to on: +#backup_converted = off + +# To have Wget follow FTP links from HTML files by default, set this +# to on: +#follow_ftp = off + +# To try ipv6 addresses first: +#prefer-family = IPv6 + +# Set default IRI support state +#iri = off + +# Force the default system encoding +#localencoding = UTF-8 + +# Force the default remote server encoding +#remoteencoding = UTF-8 + +# Turn on to prevent following non-HTTPS links when in recursive mode +#httpsonly = off + +# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS) +#secureprotocol = auto |