diff options
Diffstat (limited to 'man/libinput.man')
| -rw-r--r-- | man/libinput.man | 408 |
1 files changed, 408 insertions, 0 deletions
diff --git a/man/libinput.man b/man/libinput.man new file mode 100644 index 0000000..22b42c8 --- /dev/null +++ b/man/libinput.man @@ -0,0 +1,408 @@ +.\" shorthand for double quote that works everywhere. +.ds q \N'34' +.TH LIBINPUT __drivermansuffix__ __vendorversion__ +.SH NAME +libinput \- libinput-based X.Org input driver +.SH SYNOPSIS +.nf +.B "Section \*qInputDevice\*q" +.BI " Identifier \*q" devname \*q +.B " Driver \*qlibinput\*q" +.BI " Option \*qDevice\*q \*q" devpath \*q +\ \ ... +.B EndSection +.fi + +.SH NOTE +This is the man page for the X input driver. If you are looking for the +library documentation, go to +.BI http://wayland.freedesktop.org/libinput/doc/ + +.SH DESCRIPTION +.B libinput +is an __xservername__ input driver based on libinput. It +therefore supports all input devices that libinput can handle, including +most mice, keyboards, tablets and touchscreens. +.PP +It is recommended that +.B libinput +devices are configured through the +.B InputClass +directive (refer to __xconfigfile__(__filemansuffix__)) instead of manual +per-device configuration. Devices configured in the +__xconfigfile__(__filemansuffix__) are not hot-plug capable. + +.SH CONFIGURATION DETAILS +Please refer to __xconfigfile__(__filemansuffix__) for general configuration +details and for options that can be used with all input drivers. This +section only covers configuration details specific to this driver. +.PP +The following driver +.B Options +are supported: +.TP 7 +.BI "Option \*qAccelProfile\*q \*q" string \*q +Sets the pointer acceleration profile to the given profile. Permitted values +are +.BI adaptive, +.BI flat. +Not all devices support this option or all profiles. If a profile is +unsupported, the default profile for this device is used. For a description +on the profiles and their behavior, see the libinput documentation. +.TP 7 +.BI "Option \*qAccelSpeed\*q \*q" float \*q +Sets the pointer acceleration speed within the range [-1, 1] +.TP 7 +.BI "Option \*qButtonMapping\*q \*q" string \*q +Sets the logical button mapping for this device, see +XSetPointerMapping(__libmansuffix__). The string must be a +space-separated list of button mappings in the order of the +logical buttons on the device, starting with button 1. +The default mapping is "1 2 3 ... 32". A mapping of 0 +deactivates the button. Multiple buttons can have the same mapping. +Invalid mapping strings are discarded and the default mapping +is used for all buttons. Buttons not specified in the user's mapping use the +default mapping. See section +.B BUTTON MAPPING +for more details. +.TP 7 +.BI "Option \*qCalibrationMatrix\*q \*q" string \*q +A string of 9 space-separated floating point numbers, in the order +\*qa b c d e f g h i\*q. +Sets the calibration matrix to the 3x3 matrix where the first row is (abc), +the second row is (def) and the third row is (ghi). +.TP 7 +.BI "Option \*qClickMethod\*q \*q" string \*q +Enables a click method. Permitted values are +.BI none, +.BI buttonareas, +.BI clickfinger. +Not all devices support all methods, if an option is unsupported, the +default click method for this device is used. +.TP 7 +.BI "Option \*qDisableWhileTyping\*q \*q" bool \*q +Indicates if the touchpad should be disabled while typing on the keyboard +(this does not apply to modifier keys such as Ctrl or Alt). +.TP 7 +.BI "Option \*qDevice\*q \*q" string \*q +Specifies the device through which the device can be accessed. This will +generally be of the form \*q/dev/input/eventX\*q, where X is some integer. +When using +.B InputClass +directives, this option is set by the server. +The mapping from device node to hardware is system-dependent. Property: +"Device Node" (read-only). +.TP 7 +.BI "Option \*qDragLockButtons\*q \*q" "L1 B1 L2 B2 ..." \*q +Sets "drag lock buttons" that simulate a button logically down even when it has +been physically released. To logically release a locked button, a second click +of the same button is required. +.IP +If the option is a single button number, that button acts as the +"meta" locking button for the next button number. See section +.B BUTTON DRAG LOCK +for details. +.IP +If the option is a list of button number pairs, the first number of each +number pair is the lock button, the second number the logical button number +to be locked. See section +.B BUTTON DRAG LOCK +for details. +.IP +For both meta and button pair configuration, the button numbers are +device button numbers, i.e. the +.B ButtonMapping +applies after drag lock. +.TP 7 +.BI "Option \*qHorizontalScrolling\*q \*q" bool \*q +Disables horizontal scrolling. When disabled, this driver will discard any +horizontal scroll events from libinput. Note that this does not disable +horizontal scrolling, it merely discards the horizontal axis from any scroll +events. +.TP 7 +.BI "Option \*qLeftHanded\*q \*q" bool \*q +Enables left-handed button orientation, i.e. swapping left and right buttons. +.TP 7 +.BI "Option \*qMiddleEmulation\*q \*q" bool \*q +Enables middle button emulation. When enabled, pressing the left and right +buttons simultaneously produces a middle mouse button click. +.TP 7 +.BI "Option \*qNaturalScrolling\*q \*q" bool \*q +Enables or disables natural scrolling behavior. +.TP 7 +.BI "Option \*qRotationAngle\*q \*q" float \*q +Sets the rotation angle of the device to the given angle, in degrees +clockwise. The angle must be between 0.0 (inclusive) and 360.0 (exclusive). +.TP 7 +.BI "Option \*qScrollButton\*q \*q" int \*q +Designates a button as scroll button. If the +.BI ScrollMethod +is +.BI button +and the button is logically down, x/y axis movement is converted into +scroll events. +.TP 7 +.BI "Option \*qScrollButtonLock\*q \*q" bool \*q +Enables or disables the scroll button lock. If enabled, the +.BI ScrollButton +is considered logically down after the first click and remains down until +the second click of that button. If disabled (the default), the +.BI ScrollButton +button is considered logically down while held down and up once physically +released. +.TP 7 +.BI "Option \*qScrollMethod\*q \*q" string \*q +Enables a scroll method. Permitted values are +.BI none, +.BI twofinger, +.BI edge, +.BI button. +Not all devices support all options, if an option is unsupported, the +default scroll option for this device is used. +.TP 7 +.BI "Option \*qSendEventsMode\*q \*q" (disabled|enabled|disabled-on-external-mouse) \*q +Sets the send events mode to disabled, enabled, or "disable when an external +mouse is connected". +.TP 7 +.BI "Option \*qTabletToolPressureCurve\*q \*q" "x0/y0 x1/y1 x2/y2 x3/y3" \*q +Set the pressure curve for a tablet stylus to the bezier formed by the four +points. The respective x/y coordinate must be in the [0.0, 1.0] range. For +more information see section +.B TABLET STYLUS PRESSURE CURVE. +.TP 7 +.BI "Option \*qTabletToolAreaRatio\*q \*q" "w:h" \*q +Sets the area ratio for a tablet tool. The area always starts at the +origin (0/0) and expands to the largest available area with the specified +aspect ratio. Events outside this area are cropped to the area. The special +value "default" is used for the default mapping (i.e. the device-native +mapping). For more information see section +.B TABLET TOOL AREA RATIO. +.TP 7 +.BI "Option \*qTapping\*q \*q" bool \*q +Enables or disables tap-to-click behavior. +.TP 7 +.BI "Option \*qTappingButtonMap\*q \*q" (lrm|lmr) \*q +Set the button mapping for 1/2/3-finger taps to left/right/middle or +left/middle/right, respectively. +.TP 7 +.BI "Option \*qTappingDrag\*q \*q" bool \*q +Enables or disables drag during tapping behavior ("tap-and-drag"). When +enabled, a tap followed by a finger held down causes a single button down +only, all motions of that finger thus translate into dragging motion. +Tap-and-drag requires option +.B Tapping +to be enabled. +.TP 7 +.BI "Option \*qTappingDragLock\*q \*q" bool \*q +Enables or disables drag lock during tapping behavior. When enabled, a +finger up during tap-and-drag will not immediately release the button. If +the finger is set down again within the timeout, the dragging process +continues. +.PP +For all options, the options are only parsed if the device supports that +configuration option. For all options, the default value is the one used by +libinput. On configuration failure, the default value is applied. + +.SH SUPPORTED PROPERTIES +.B libinput +exports runtime-configurable options as properties. If a property listed +below is not available, the matching configuration option is not available +on the device. This however does not imply that the feature is not available +on the device. The following properties are provided by the +.B libinput +driver. +.TP 7 +.BI "libinput Accel Profiles Available" +2 boolean values (8 bit, 0 or 1), in order "adaptive", "flat". +Indicates which acceleration profiles are available on this device. +.TP 7 +.BI "libinput Accel Profile Enabled" +2 boolean values (8 bit, 0 or 1), in order "adaptive", "flat". +Indicates which acceleration profile is currently enabled on this device. +.TP 7 +.BI "libinput Accel Speed" +1 32-bit float value, defines the pointer speed. Value range -1, 1 +.TP 7 +.BI "libinput Button Scrolling Button" +1 32-bit value. Sets the button number to use for button scrolling. This +setting is independent of the scroll method, to enable button scrolling the +method must be set to button-scrolling and a valid button must be set. +.TP 7 +.BI "libinput Button Scrolling Button Lock Enabled" +1 boolean value. If true, the scroll button lock is enabled. This +setting is independent of the scroll method or the scroll button, to enable +button scrolling the method must be set to button-scrolling and a valid +button must be set. +.TP 7 +.BI "libinput Calibration Matrix" +9 32-bit float values, representing a 3x3 calibration matrix, order is row +1, row 2, row 3 +.TP 7 +.BI "libinput Click Methods Available" +2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger". +Indicates which click methods are available on this device. +.TP 7 +.BI "libinput Click Methods Enabled" +2 boolean values (8 bit, 0 or 1), in order "buttonareas", "clickfinger". +Indicates which click methods are enabled on this device. +.TP 7 +.BI "libinput Drag Lock Buttons" +Either one 8-bit value specifying the meta drag lock button, or a list of +button pairs. See section +.B BUTTON DRAG LOCK +for details. +.TP 7 +.BI "libinput Horizontal Scrolling Enabled" +1 boolean value (8 bit, 0 or 1). Indicates whether horizontal scrolling +events are enabled or not. +.TP 7 +.BI "libinput Left Handed Enabled" +1 boolean value (8 bit, 0 or 1). Indicates if left-handed mode is enabled or +disabled. +.TP 7 +.BI "libinput Middle Emulation Enabled" +1 boolean value (8 bit, 0 or 1). Indicates if middle emulation is enabled or +disabled. +.TP 7 +.BI "libinput Natural Scrolling Enabled" +1 boolean value (8 bit, 0 or 1). 1 enables natural scrolling +.TP 7 +.BI "libinput Rotation Angle" +1 32-bit float value [0.0 to 360.0). Sets the rotation angle of the device, +clockwise of its natural neutral position. +.TP 7 +.BI "libinput Scroll Methods Available" +3 boolean values (8 bit, 0 or 1), in order "two-finger", "edge", "button". +Indicates which scroll methods are available on this device. +.TP 7 +.BI "libinput Scroll Method Enabled" +3 boolean values (8 bit, 0 or 1), in order "two-finger", "edge", "button". +Indicates which scroll method is currently enabled on this device. +.TP 7 +.BI "libinput Send Events Modes Available" +2 boolean values (8 bit, 0 or 1), in order "disabled" and +"disabled-on-external-mouse". Indicates which send-event modes are available +on this device. +.TP 7 +.BI "libinput Send Events Mode Enabled" +2 boolean values (8 bit, 0 or 1), in order "disabled" and +"disabled-on-external-mouse". Indicates which send-event modes is currently +enabled on this device. +.TP 7 +.BI "libinput Tablet Tool Pressurecurve" +4 32-bit float values [0.0 to 1.0]. See section +.B TABLET TOOL PRESSURE CURVE +.TP 7 +.BI "libinput Tablet Tool Area Ratio" +2 32-bit values, corresponding to width and height. Special value 0, 0 +resets to the default ratio. See section +.B TABLET TOOL AREA RATIO +for more information. +.TP 7 +.BI "libinput Tapping Enabled" +1 boolean value (8 bit, 0 or 1). 1 enables tapping +.TP 7 +.BI "libinput Tapping Button Mapping Enabled" +2 boolean value (8 bit, 0 or 1), in order "lrm" and "lmr". Indicates which +button mapping is currently enabled on this device. +.TP 7 +.BI "libinput Tapping Drag Lock Enabled" +1 boolean value (8 bit, 0 or 1). 1 enables drag lock during tapping +.TP 7 +.BI "libinput Disable While Typing Enabled" +1 boolean value (8 bit, 0 or 1). Indicates if disable while typing is +enabled or disabled. +.PP +Most properties have a +.BI "libinput <property name> Default" +equivalent that indicates the default value for this setting on this device. + +.SH BUTTON MAPPING +X clients receive events with logical button numbers, where 1, 2, 3 +are usually interpreted as left, middle, right and logical buttons 4, 5, 6, +7 are usually interpreted as scroll up, down, left, right. The fourth and +fifth physical buttons on a device will thus send logical buttons 8 and 9. +The +.B ButtonMapping +option adjusts the logical button mapping, it does not affect how a physical +button is mapped to a logical button. +.PP +Traditionally, a device was set to left-handed button mode by applying a +button mapping of +.B "\*q3 2 1 ...\*q" +On systems using the +.B libinput +__xservername__ input driver it is recommended to use the +.B LeftHanded +option instead. +.PP +The +.B libinput +__xservername__ input driver does not use the button mapping after setup. +Use XSetPointerMapping(__libmansuffix__) to modify the button mapping at +runtime. + +.SH BUTTON DRAG LOCK +Button drag lock holds a button logically down even when the button itself +has been physically released since. Button drag lock comes in two modes. +.PP +If in "meta" mode, a meta button click activates drag lock for the next +button press of any other button. A button click in the future will keep +that button held logically down until a subsequent click of that same +button. The meta button events themselves are discarded. A separate meta +button click is required each time a drag lock should be activated for a +button in the future. +.PP +If in "pairs" mode, each button can be assigned a target locking button. +On button click, the target lock button is held logically down until the +next click of the same button. The button events themselves are discarded +and only the target button events are sent. +.TP +This feature is provided by this driver, not by libinput. + +.SH TABLET TOOL PRESSURECURVE +The pressure curve affects how stylus pressure is reported. By default, the +hardware pressure is reported as-is. By setting a pressure curve, the feel +of the stylus can be adjusted to be more like e.g. a pencil or a brush. +.PP +The pressure curve is a cubic Bezier curve, drawn within a normalized range +of 0.0 to 1.0 between the four points provided. This normalized range is +applied to the tablet's pressure input so that the highest pressure maps to +1.0. The points must have increasing x coordinates, if x0 is larger than 0.0 +all pressure values lower than x0 are equivalent to y0. If x3 is less than +1.0, all pressure values higher than x3 are equivalent to y3. + +The input for a linear curve (default) is "0.0/0.0 0.0/0.0 1.0/1.0 1.0/1.0"; +a slightly +depressed curve (firmer) might be "0.0/0.0 0.05/0.0 1.0/0.95 1.0/1.0"; a slightly raised +curve (softer) might be "0.0/0.0 0.0/0.05 0.95/1.0 1.0/1.0". +.TP +This feature is provided by this driver, not by libinput. + +.SH TABLET TOOL AREA RATIO +By default, a tablet tool can access the whole sensor area and the tablet +area is mapped to the available screen area. For external tablets like +the Wacom Intuos series, the height:width ratio of the tablet may be +different to that of the monitor, causing the skew of input data. +.PP +To avoid this skew of input data, an area ratio may be set to match the +ratio of the screen device. For example, a ratio of 4:3 will reduce the +available area of the tablet to the largest available area with a ratio of +4:3. Events within this area will scale to the tablet's announced axis +range, the area ratio is thus transparent to the X server. Any events +outside this area will send events equal to the maximum value of that axis. +The area always starts at the device's origin in it's current rotation, i.e. +it takes left-handed-ness into account. +.TP +This feature is provided by this driver, not by libinput. + +.SH BUGS +This driver does not work with \fBOption \*qDevice\*q\fR set to an event +node in \fI/dev/input/by-id\fR and \fI/dev/input/by-path\fR. This can be +usually be worked by using \fBSection \*qInputClass\*q\fR with an +appropriate \fBMatch*\fR statement in the __xconfigfile__(__filemansuffix__). + +.SH AUTHORS +Peter Hutterer +.SH "SEE ALSO" +__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__) |