summaryrefslogtreecommitdiffstats
path: root/doc/rbd/rbd-persistent-write-log-cache.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-21 11:54:28 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-21 11:54:28 +0000
commite6918187568dbd01842d8d1d2c808ce16a894239 (patch)
tree64f88b554b444a49f656b6c656111a145cbbaa28 /doc/rbd/rbd-persistent-write-log-cache.rst
parentInitial commit. (diff)
downloadceph-e6918187568dbd01842d8d1d2c808ce16a894239.tar.xz
ceph-e6918187568dbd01842d8d1d2c808ce16a894239.zip
Adding upstream version 18.2.2.upstream/18.2.2
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'doc/rbd/rbd-persistent-write-log-cache.rst')
-rw-r--r--doc/rbd/rbd-persistent-write-log-cache.rst139
1 files changed, 139 insertions, 0 deletions
diff --git a/doc/rbd/rbd-persistent-write-log-cache.rst b/doc/rbd/rbd-persistent-write-log-cache.rst
new file mode 100644
index 000000000..af323962d
--- /dev/null
+++ b/doc/rbd/rbd-persistent-write-log-cache.rst
@@ -0,0 +1,139 @@
+================================
+ RBD Persistent Write Log Cache
+================================
+
+.. index:: Ceph Block Device; Persistent Write Log Cache
+
+Persistent Write Log Cache
+===========================
+
+The Persistent Write Log Cache (PWL) provides a persistent, fault-tolerant
+write-back cache for librbd-based RBD clients.
+
+This cache uses a log-ordered write-back design which maintains checkpoints
+internally so that writes that get flushed back to the cluster are always
+crash consistent. Even if the client cache is lost entirely, the disk image is
+still consistent but the data will appear to be stale.
+
+This cache can be used with PMEM or SSD as a cache device. For PMEM, the cache
+mode is called ``replica write log (rwl)``. At present, only local cache is
+supported, and the replica function is under development. For SSD, the cache
+mode is called ``ssd``.
+
+Usage
+=====
+
+The PWL cache manages the cache data in a persistent device. It looks for and
+creates cache files in a configured directory, and then caches data in the
+file.
+
+The PWL cache depends on the exclusive-lock feature. The cache can be loaded
+only after the exclusive lock is acquired.
+
+The cache provides two different persistence modes. In persistent-on-write mode,
+the writes are completed only when they are persisted to the cache device and
+will be readable after a crash. In persistent-on-flush mode, the writes are
+completed as soon as it no longer needs the caller's data buffer to complete
+the writes, but does not guarantee that writes will be readable after a crash.
+The data is persisted to the cache device when a flush request is received.
+
+Initially it defaults to the persistent-on-write mode and it switches to
+persistent-on-flush mode after the first flush request is received.
+
+Enable Cache
+========================================
+
+To enable the PWL cache, set the following configuration settings::
+
+ rbd_persistent_cache_mode = {cache-mode}
+ rbd_plugins = pwl_cache
+
+Value of {cache-mode} can be ``rwl``, ``ssd`` or ``disabled``. By default the
+cache is disabled.
+
+The ``rwl`` cache mode depends on libpmem library (part of PMDK). It should
+be universally available on x86_64 architecture and may also be available on
+ppc64le and aarch64 architectures on some distributions. It is not available
+on s390x architecture.
+
+Here are some cache configuration settings:
+
+- ``rbd_persistent_cache_path`` A file folder to cache data. This folder must
+ have DAX enabled (see `DAX`_) when using ``rwl`` mode to avoid performance
+ degradation.
+
+- ``rbd_persistent_cache_size`` The cache size per image. The minimum cache
+ size is 1 GB.
+
+The above configurations can be set per-host, per-pool, per-image etc. Eg, to
+set per-host, add the overrides to the appropriate `section`_ in the host's
+``ceph.conf`` file. To set per-pool, per-image, etc, please refer to the
+``rbd config`` `commands`_.
+
+Cache Status
+------------
+
+The PWL cache is enabled when the exclusive lock is acquired,
+and it is closed when the exclusive lock is released. To check the cache status,
+users may use the command ``rbd status``. ::
+
+ rbd status {pool-name}/{image-name}
+
+The status of the cache is shown, including present, clean, cache size and the
+location as well as some basic metrics.
+
+For example::
+
+ $ rbd status rbd/foo
+ Watchers:
+ watcher=10.10.0.102:0/1061883624 client.25496 cookie=140338056493088
+ Persistent cache state:
+ host: sceph9
+ path: /mnt/nvme0/rbd-pwl.rbd.101e5824ad9a.pool
+ size: 1 GiB
+ mode: ssd
+ stats_timestamp: Sun Apr 10 13:26:32 2022
+ present: true empty: false clean: false
+ allocated: 509 MiB
+ cached: 501 MiB
+ dirty: 338 MiB
+ free: 515 MiB
+ hits_full: 1450 / 61%
+ hits_partial: 0 / 0%
+ misses: 924
+ hit_bytes: 192 MiB / 66%
+ miss_bytes: 97 MiB
+
+Flush Cache
+-----------
+
+To flush a cache file with ``rbd``, specify the ``persistent-cache flush``
+command, the pool name and the image name. ::
+
+ rbd persistent-cache flush {pool-name}/{image-name}
+
+If the application dies unexpectedly, this command can also be used to flush
+the cache back to OSDs.
+
+For example::
+
+ $ rbd persistent-cache flush rbd/foo
+
+Invalidate Cache
+----------------
+
+To invalidate (discard) a cache file with ``rbd``, specify the
+``persistent-cache invalidate`` command, the pool name and the image name. ::
+
+ rbd persistent-cache invalidate {pool-name}/{image-name}
+
+The command removes the cache metadata of the corresponding image, disables
+the cache feature and deletes the local cache file if it exists.
+
+For example::
+
+ $ rbd persistent-cache invalidate rbd/foo
+
+.. _section: ../../rados/configuration/ceph-conf/#configuration-sections
+.. _commands: ../../man/8/rbd#commands
+.. _DAX: https://www.kernel.org/doc/Documentation/filesystems/dax.txt