Adding upstream version 18.2.2.upstream/18.2.2

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

52 files changed, 2447 insertions, 0 deletions

diff --git a/qa/workunits/fs/.gitignore b/qa/workunits/fs/.gitignore
new file mode 100644
index 000000000..f7f7a0614
--- /dev/null
+++ b/qa/workunits/fs/.gitignore
@@ -0,0 +1 @@
+test_o_trunc
diff --git a/qa/workunits/fs/Makefile b/qa/workunits/fs/Makefile
new file mode 100644
index 000000000..c9934254d
--- /dev/null
+++ b/qa/workunits/fs/Makefile
@@ -0,0 +1,11 @@
+CFLAGS = -Wall -Wextra -D_GNU_SOURCE
+
+TARGETS = test_o_trunc
+
+.c:
+	$(CC) $(CFLAGS) $@.c -o $@
+
+all:	$(TARGETS)
+
+clean:
+	rm $(TARGETS)
diff --git a/qa/workunits/fs/cephfs_mirror_ha_gen.sh b/qa/workunits/fs/cephfs_mirror_ha_gen.sh
new file mode 100755
index 000000000..35ee9d4c7
--- /dev/null
+++ b/qa/workunits/fs/cephfs_mirror_ha_gen.sh
@@ -0,0 +1,69 @@
+#!/bin/bash -ex
+#
+# cephfs_mirror_ha_gen.sh - generate workload to synchronize
+#
+
+. $(dirname $0)/cephfs_mirror_helpers.sh
+
+cleanup()
+{
+    for i in `seq 1 $NR_DIRECTORIES`
+    do
+        local repo_name="${REPO_PATH_PFX}_$i"
+        for j in `seq 1 $NR_SNAPSHOTS`
+        do
+            snap_name=$repo_name/.snap/snap_$j
+            if test -d $snap_name; then
+                rmdir $snap_name
+            fi
+        done
+    done
+    exit 1
+}
+trap cleanup EXIT
+
+configure_peer()
+{
+    ceph mgr module enable mirroring
+    ceph fs snapshot mirror enable $PRIMARY_FS
+    ceph fs snapshot mirror peer_add $PRIMARY_FS client.mirror_remote@ceph $BACKUP_FS
+
+    for i in `seq 1 $NR_DIRECTORIES`
+    do
+        local repo_name="${REPO_PATH_PFX}_$i"
+        ceph fs snapshot mirror add $PRIMARY_FS "$MIRROR_SUBDIR/$repo_name"
+    done
+}
+
+create_snaps()
+{
+    for i in `seq 1 $NR_DIRECTORIES`
+    do
+        local repo_name="${REPO_PATH_PFX}_$i"
+        for j in `seq 1 $NR_SNAPSHOTS`
+        do
+            snap_name=$repo_name/.snap/snap_$j
+            r=$(( $RANDOM % 100 + 5 ))
+            arr=($repo_name "reset" "--hard" "HEAD~$r")
+            exec_git_cmd "${arr[@]}"
+            mkdir $snap_name
+            store_checksum $snap_name
+        done
+    done
+}
+
+unset CEPH_CLI_TEST_DUP_COMMAND
+
+echo "running generator on prmary file system..."
+
+# setup git repos to be used as data set
+setup_repos
+
+# turn on mirroring, add peers...
+configure_peer
+
+# snapshots on primary
+create_snaps
+
+# do not cleanup when exiting on success..
+trap - EXIT
diff --git a/qa/workunits/fs/cephfs_mirror_ha_verify.sh b/qa/workunits/fs/cephfs_mirror_ha_verify.sh
new file mode 100755
index 000000000..8d8b3859c
--- /dev/null
+++ b/qa/workunits/fs/cephfs_mirror_ha_verify.sh
@@ -0,0 +1,40 @@
+#!/bin/bash -ex
+#
+# cephfs_mirror_ha_verify.sh - verify synchronized snapshots
+#
+
+. $(dirname $0)/cephfs_mirror_helpers.sh
+
+echo "running verifier on secondary file system..."
+
+for i in `seq 1 $NR_DIRECTORIES`
+do
+    repo_name="${REPO_PATH_PFX}_$i"
+    for j in `seq 1 $NR_SNAPSHOTS`
+    do
+        for s in 1 1 2 4 4 4 4 4 8 8 8 8 16 16 32 64 64 128 128
+        do
+            sleep $s
+            snap_name=$repo_name/.snap/snap_$j
+            if test -d $repo_name; then
+                echo "checking snapshot [$snap_name] in $repo_name"
+                if test -d $snap_name; then
+                    echo "generating hash for $snap_name"
+                    cksum=''
+                    calc_checksum $snap_name cksum
+                    ret=$(compare_checksum $cksum $snap_name)
+                    if [ $ret -ne 0 ]; then
+                        echo "checksum failed $snap_name ($cksum)"
+                        return $ret
+                    else
+                        echo "checksum matched $snap_name ($cksum)"
+                        break
+                    fi
+                fi
+            fi
+        done
+        echo "couldn't complete verification for: $snap_name"
+    done
+done
+
+echo "verify done!"
diff --git a/qa/workunits/fs/cephfs_mirror_helpers.sh b/qa/workunits/fs/cephfs_mirror_helpers.sh
new file mode 100644
index 000000000..69f1c6f3d
--- /dev/null
+++ b/qa/workunits/fs/cephfs_mirror_helpers.sh
@@ -0,0 +1,66 @@
+PRIMARY_FS='dc'
+BACKUP_FS='dc-backup'
+
+REPO=ceph-qa-suite
+REPO_DIR=ceph_repo
+REPO_PATH_PFX="$REPO_DIR/$REPO"
+
+NR_DIRECTORIES=4
+NR_SNAPSHOTS=4
+MIRROR_SUBDIR='/mirror'
+
+calc_checksum()
+{
+    local path=$1
+    local -n ref=$2
+    ref=`find -L $path -type f -exec md5sum {} +  | awk '{ print $1 }' | md5sum | awk '{ print $1 }'`
+}
+
+store_checksum()
+{
+    local path=$1
+    local cksum='' #something invalid
+    local fhash=`echo -n $path | md5sum | awk '{ print $1 }'`
+    calc_checksum $path cksum
+    echo -n $cksum > "/tmp/primary-$fhash"
+}
+
+compare_checksum()
+{
+    local ret=0
+    local cksum=$1
+    local path=$2
+    local fhash=`echo -n $path | md5sum | awk '{ print $1 }'`
+    local cksum_ondisk=`cat /tmp/primary-$fhash`
+    if [ $cksum != $cksum_ondisk ]; then
+        echo "$cksum <> $cksum_ondisk"
+        ret=1
+    fi
+    echo $ret
+}
+
+exec_git_cmd()
+{
+    local arg=("$@")
+    local repo_name=${arg[0]}
+    local cmd=${arg[@]:1}
+    git --git-dir "$repo_name/.git" $cmd
+}
+
+clone_repo()
+{
+    local repo_name=$1
+    git clone --branch giant "http://github.com/ceph/$REPO" $repo_name
+}
+
+setup_repos()
+{
+    mkdir "$REPO_DIR"
+
+    for i in `seq 1 $NR_DIRECTORIES`
+    do
+        local repo_name="${REPO_PATH_PFX}_$i"
+        mkdir $repo_name
+        clone_repo $repo_name
+    done
+}
diff --git a/qa/workunits/fs/damage/test-first-damage.sh b/qa/workunits/fs/damage/test-first-damage.sh
new file mode 100755
index 000000000..57447b957
--- /dev/null
+++ b/qa/workunits/fs/damage/test-first-damage.sh
@@ -0,0 +1,194 @@
+#!/bin/bash
+
+set -ex
+
+FIRST_DAMAGE="first-damage.py"
+FS=cephfs
+METADATA_POOL=cephfs_meta
+MOUNT=~/mnt/mnt.0
+PYTHON=python3
+
+function usage {
+  printf '%s: [--fs=<fs_name>] [--metadata-pool=<pool>] [--first-damage=</path/to/first-damage.py>]\n'
+  exit 1
+}
+
+
+function create {
+  ceph config set mds mds_bal_fragment_dirs 0
+  mkdir dir
+  DIR_INODE=$(stat -c '%i' dir)
+  touch dir/a
+  touch dir/"a space"
+  touch -- $(printf 'dir/\xff')
+  mkdir dir/.snap/1
+  mkdir dir/.snap/2
+  # two snaps
+  rm dir/a
+  mkdir dir/.snap/3
+  # not present in HEAD
+  touch dir/a
+  mkdir dir/.snap/4
+  # one snap
+  rm dir/a
+  touch dir/a
+  mkdir dir/.snap/5
+  # unlink then create
+  rm dir/a
+  touch dir/a
+  # unlink then create, HEAD not snapped
+  ls dir/.snap/*/
+  mkdir big
+  BIG_DIR_INODE=$(stat -c '%i' big)
+  for i in `seq 1 15000`; do
+    touch $(printf 'big/%08d' $i)
+  done
+}
+
+function flush {
+  ceph tell mds."$FS":0 flush journal
+}
+
+function damage {
+  local IS=$(printf '%llx.%08llx' "$DIR_INODE" 0)
+  local LS=$(ceph tell mds."$FS":0 dump snaps | jq .last_created)
+
+  local T=$(mktemp -p /tmp)
+
+  # nuke snap 1 version of "a"
+  rados --pool="$METADATA_POOL" getomapval "$IS" a_$(printf %x $((LS-4))) "$T"
+  printf '\xff\xff\xff\xf0' | dd of="$T" count=4 bs=1 conv=notrunc,nocreat
+  rados --pool="$METADATA_POOL" setomapval "$IS" a_$(printf %x $((LS-4))) --input-file="$T"
+
+  # nuke snap 4 version of "a"
+  rados --pool="$METADATA_POOL" getomapval "$IS" a_$(printf %x $((LS-1))) "$T"
+  printf '\xff\xff\xff\xff' | dd of="$T" count=4 bs=1 conv=notrunc,nocreat
+  rados --pool="$METADATA_POOL" setomapval "$IS" a_$(printf %x $((LS-1))) --input-file="$T"
+
+  # screw up HEAD
+  rados --pool="$METADATA_POOL" getomapval "$IS" a_head "$T"
+  printf '\xfe\xff\xff\xff' | dd of="$T" count=4 bs=1 conv=notrunc,nocreat
+  rados --pool="$METADATA_POOL" setomapval "$IS" a_head --input-file="$T"
+
+  # screw up HEAD on what dentry in big
+  IS=$(printf '%llx.%08llx' "$BIG_DIR_INODE" 0)
+  rados --pool="$METADATA_POOL" getomapval "$IS" 00009999_head "$T"
+  printf '\xfe\xff\xff\xff' | dd of="$T" count=4 bs=1 conv=notrunc,nocreat
+  rados --pool="$METADATA_POOL" setomapval "$IS" 00009999_head --input-file="$T"
+
+  rm -f "$T"
+}
+
+function recover {
+  flush
+  ceph fs fail "$FS"
+  sleep 5
+  cephfs-journal-tool --rank="$FS":0 event recover_dentries summary
+  cephfs-journal-tool --rank="$FS":0 journal reset
+  "$PYTHON" $FIRST_DAMAGE --debug /tmp/debug1 --memo /tmp/memo1 "$METADATA_POOL"
+  "$PYTHON" $FIRST_DAMAGE --debug /tmp/debug2 --memo /tmp/memo2 --repair-nosnap  "$METADATA_POOL"
+  "$PYTHON" $FIRST_DAMAGE --debug /tmp/debug3 --memo /tmp/memo3 --remove "$METADATA_POOL"
+  ceph fs set "$FS" joinable true
+}
+
+function check {
+  stat dir || exit 1
+  stat dir/a || exit 1
+  for i in `seq 1 5`; do
+    stat dir/.snap/$i || exit 2
+  done
+  stat dir/.snap/2/a || exit 3
+  stat dir/.snap/5/a || exit 4
+  if stat dir/.snap/1/a; then
+    echo should be gone
+    exit 5
+  fi
+  if stat dir/.snap/3/a; then
+    echo should not ever exist
+    exit 6
+  fi
+  if stat dir/.snap/4/a; then
+    echo should be gone
+    exit 7
+  fi
+}
+
+function cleanup {
+  rmdir dir/.snap/*
+  find dir
+  rm -rf dir
+}
+
+function mount {
+  sudo --preserve-env=CEPH_CONF bin/mount.ceph :/ "$MOUNT" -o name=admin,noshare
+  df -h "$MOUNT"
+}
+
+function main {
+  eval set -- $(getopt --name "$0" --options '' --longoptions 'help,fs:,metadata-pool:,first-damage:,mount:,python:' -- "$@")
+
+  while [ "$#" -gt 0 ]; do
+      echo "$*"
+      echo "$1"
+      case "$1" in
+          -h|--help)
+              usage
+              ;;
+          --fs)
+              FS="$2"
+              shift 2
+              ;;
+          --metadata-pool)
+              METADATA_POOL="$2"
+              shift 2
+              ;;
+          --mount)
+              MOUNT="$2"
+              shift 2
+              ;;
+          --first-damage)
+              FIRST_DAMAGE="$2"
+              shift 2
+              ;;
+          --python)
+              PYTHON="$2"
+              shift 2
+              ;;
+          --)
+              shift
+              break
+              ;;
+          *)
+              usage
+              ;;
+      esac
+  done
+
+  mount
+
+  pushd "$MOUNT"
+  create
+  popd
+
+  sudo umount -f "$MOUNT"
+
+  # flush dentries/inodes to omap
+  flush
+
+  damage
+
+  recover
+
+  sleep 5 # for mds to join
+
+  mount
+
+  pushd "$MOUNT"
+  check
+  cleanup
+  popd
+
+  sudo umount -f "$MOUNT"
+}
+
+main "$@"
diff --git a/qa/workunits/fs/fscrypt.sh b/qa/workunits/fs/fscrypt.sh
new file mode 100755
index 000000000..ca856a62e
--- /dev/null
+++ b/qa/workunits/fs/fscrypt.sh
@@ -0,0 +1,119 @@
+#!/usr/bin/env bash
+
+set -xe
+
+mydir=`dirname $0`
+
+if [ $# -ne 2 ]
+then
+	echo "2 parameters are required!\n"
+	echo "Usage:"
+	echo "  fscrypt.sh <type> <testdir>"
+	echo "  type: should be any of 'none', 'unlocked' or 'locked'"
+	echo "  testdir: the test direcotry name"
+	exit 1
+fi
+
+fscrypt=$1
+testcase=$2
+testdir=fscrypt_test_${fscrypt}_${testcase}
+mkdir $testdir
+
+XFSPROGS_DIR='xfprogs-dev-dir'
+XFSTESTS_DIR='xfstest-dev-dir'
+export XFS_IO_PROG="$(type -P xfs_io)"
+
+# Setup the xfstests env
+setup_xfstests_env()
+{
+	git clone https://git.ceph.com/xfstests-dev.git $XFSTESTS_DIR --depth 1
+	pushd $XFSTESTS_DIR
+	. common/encrypt
+	popd
+}
+
+install_deps()
+{
+	local system_value=$(sudo lsb_release -is | awk '{print tolower($0)}')
+	case $system_value in
+		"centos" | "centosstream" | "fedora")
+			sudo yum install -y inih-devel userspace-rcu-devel \
+				libblkid-devel gettext libedit-devel \
+				libattr-devel device-mapper-devel libicu-devel
+			;;
+		"ubuntu" | "debian")
+			sudo apt-get install -y libinih-dev liburcu-dev \
+				libblkid-dev gettext libedit-dev libattr1-dev \
+				libdevmapper-dev libicu-dev pkg-config
+			;;
+		*)
+			echo "Unsupported distro $system_value"
+			exit 1
+			;;
+	esac
+}
+
+# Install xfsprogs-dev from source to support "add_enckey" for xfs_io
+install_xfsprogs()
+{
+	local install_xfsprogs=0
+
+	xfs_io -c "help add_enckey" | grep -q 'not found' && install_xfsprogs=1
+
+	if [ $install_xfsprogs -eq 1 ]; then
+		install_deps
+
+		git clone https://git.ceph.com/xfsprogs-dev.git $XFSPROGS_DIR --depth 1
+		pushd $XFSPROGS_DIR
+		make
+		sudo make install
+		popd
+	fi
+}
+
+clean_up()
+{
+	rm -rf $XFSPROGS_DIR
+	rm -rf $XFSTESTS_DIR
+	rm -rf $testdir
+}
+
+# For now will test the V2 encryption policy only as the
+# V1 encryption policy is deprecated
+
+install_xfsprogs
+setup_xfstests_env
+
+# Generate a fixed keying identifier
+raw_key=$(_generate_raw_encryption_key)
+keyid=$(_add_enckey $testdir "$raw_key" | awk '{print $NF}')
+
+case ${fscrypt} in
+	"none")
+		# do nothing for the test directory and will test it
+		# as one non-encrypted directory.
+		pushd $testdir
+		${mydir}/../suites/${testcase}.sh
+		popd
+		clean_up
+		;;
+	"unlocked")
+		# set encrypt policy with the key provided and then
+		# the test directory will be encrypted & unlocked
+		_set_encpolicy $testdir $keyid
+		pushd $testdir
+		${mydir}/../suites/${testcase}.sh
+		popd
+		clean_up
+		;;
+	"locked")
+		# remove the key, then the test directory will be locked
+		# and any modification will be denied by requiring the key
+		_rm_enckey $testdir $keyid
+		clean_up
+		;;
+	*)
+		clean_up
+		echo "Unknown parameter $1"
+		exit 1
+esac
diff --git a/qa/workunits/fs/full/subvolume_clone.sh b/qa/workunits/fs/full/subvolume_clone.sh
new file mode 100755
index 000000000..a11131215
--- /dev/null
+++ b/qa/workunits/fs/full/subvolume_clone.sh
@@ -0,0 +1,114 @@
+#!/usr/bin/env bash
+set -ex
+
+# This testcase tests the  'ceph fs subvolume snapshot clone' when the osd is full.
+# The clone fails with 'MetadataMgrException: -28 (error in write)' and
+# truncates the config file of corresponding subvolume while updating the config file.
+# Hence the subsequent subvolume commands on the clone fails with
+# 'MetadataMgrException: -2 (section 'GLOBAL' does not exist)' traceback.
+
+# The osd is of the size 1GB. The full-ratios are set so that osd is treated full
+# at around 600MB. The subvolume is created and 100MB is written.
+# The subvolume is snapshotted and cloned ten times. Since the clone delay is set to 15 seconds,
+# all the clones reach pending state for sure. Among ten clones, only few succeed and rest fails
+# with ENOSPACE.
+
+# At this stage, ".meta" config file of the failed clones are checked if it's truncated.
+# and clone status command is checked for traceback.
+
+# Note that the failed clones would be in retry loop and it's state would be 'pending' or 'in-progress'.
+# It's state is not updated to 'failed' as the config update to gets ENOSPACE too.
+
+set -e
+ignore_failure() {
+        if "$@"; then return 0; else return 0; fi
+}
+
+expect_failure() {
+        if "$@"; then return 1; else return 0; fi
+}
+
+NUM_CLONES=10
+
+ceph fs subvolume create cephfs sub_0
+subvol_path_0=$(ceph fs subvolume getpath cephfs sub_0 2>/dev/null)
+
+# For debugging
+echo "Before ratios are set"
+df $CEPH_MNT
+ceph osd df
+
+ceph osd set-full-ratio 0.6
+ceph osd set-nearfull-ratio 0.50
+ceph osd set-backfillfull-ratio 0.55
+
+# For debugging
+echo "After ratios are set"
+df -h
+ceph osd df
+
+for i in {1..100};do sudo dd if=/dev/urandom of=$CEPH_MNT$subvol_path_0/1MB_file-$i status=progress bs=1M count=1 conv=fdatasync;done
+
+# For debugging
+echo "After subvolumes are written"
+df -h $CEPH_MNT
+ceph osd df
+
+# snapshot
+ceph fs subvolume snapshot create cephfs sub_0 snap_0
+
+# Set clone snapshot delay
+ceph config set mgr mgr/volumes/snapshot_clone_delay 15
+
+# Schedule few clones, some would fail with no space
+for i in $(eval echo {1..$NUM_CLONES});do ceph fs subvolume snapshot clone cephfs sub_0 snap_0 clone_$i;done
+
+# Wait for osd is full
+timeout=90
+while [ $timeout -gt 0 ]
+do
+  health=$(ceph health detail)
+  [[ $health = *"OSD_FULL"* ]] && echo "OSD is full" && break
+  echo "Wating for osd to be full: $timeout"
+  sleep 1
+  let "timeout-=1"
+done
+
+# For debugging
+echo "After osd is full"
+df -h $CEPH_MNT
+ceph osd df
+
+# Check clone status, this should not crash
+for i in $(eval echo {1..$NUM_CLONES})
+do
+  ignore_failure ceph fs clone status cephfs clone_$i >/tmp/out_${PID}_file 2>/tmp/error_${PID}_file
+  cat /tmp/error_${PID}_file
+  if grep "complete" /tmp/out_${PID}_file; then
+    echo "The clone_$i is completed"
+  else
+    #in-progress/pending clones, No traceback should be found in stderr
+    echo clone_$i in PENDING/IN-PROGRESS
+    expect_failure sudo grep "Traceback" /tmp/error_${PID}_file
+    #config file should not be truncated and GLOBAL section should be found
+    sudo grep "GLOBAL" $CEPH_MNT/volumes/_nogroup/clone_$i/.meta
+  fi
+done
+
+# Hard cleanup
+ignore_failure sudo rm -rf $CEPH_MNT/_index/clone/*
+ignore_failure sudo rm -rf $CEPH_MNT/volumes/_nogroup/clone_*
+ignore_failure sudo rmdir $CEPH_MNT/volumes/_nogroup/sub_0/.snap/snap_0
+ignore_failure sudo rm -rf $CEPH_MNT/volumes/_nogroup/sub_0
+
+#Set the ratios back for other full tests to run
+ceph osd set-full-ratio 0.95
+ceph osd set-nearfull-ratio 0.95
+ceph osd set-backfillfull-ratio 0.95
+
+#After test
+echo "After test"
+df -h $CEPH_MNT
+ceph osd df
+
+echo OK
diff --git a/qa/workunits/fs/full/subvolume_rm.sh b/qa/workunits/fs/full/subvolume_rm.sh
new file mode 100755
index 000000000..a464e30f5
--- /dev/null
+++ b/qa/workunits/fs/full/subvolume_rm.sh
@@ -0,0 +1,72 @@
+#!/usr/bin/env bash
+set -ex
+
+# This testcase tests the scenario of the 'ceph fs subvolume rm' mgr command
+# when the osd is full. The command used to hang. The osd is of the size 1GB.
+# The subvolume is created and 500MB file is written. The full-ratios are
+# set below 500MB such that the osd is treated as full. Now the subvolume is
+# is removed. This should be successful with the introduction of FULL
+# capabilities which the mgr holds.
+
+set -e
+expect_failure() {
+	if "$@"; then return 1; else return 0; fi
+}
+
+ceph fs subvolume create cephfs sub_0
+subvol_path=$(ceph fs subvolume getpath cephfs sub_0 2>/dev/null)
+
+#For debugging
+echo "Before write"
+df -h
+ceph osd df
+
+sudo dd if=/dev/urandom of=$CEPH_MNT$subvol_path/500MB_file-1 status=progress bs=1M count=500
+
+ceph osd set-full-ratio 0.2
+ceph osd set-nearfull-ratio 0.16
+ceph osd set-backfillfull-ratio 0.18
+
+timeout=30
+while [ $timeout -gt 0 ]
+do
+  health=$(ceph health detail)
+  [[ $health = *"OSD_FULL"* ]] && echo "OSD is full" && break
+  echo "Wating for osd to be full: $timeout"
+  sleep 1
+  let "timeout-=1"
+done
+
+#For debugging
+echo "After ratio set"
+df -h
+ceph osd df
+
+#Delete subvolume
+ceph fs subvolume rm cephfs sub_0
+
+#Validate subvolume is deleted
+expect_failure ceph fs subvolume info cephfs sub_0
+
+#Wait for subvolume to delete data
+trashdir=$CEPH_MNT/volumes/_deleting
+timeout=30
+while [ $timeout -gt 0 ]
+do
+  [ -z "$(sudo ls -A $trashdir)" ] && echo "Trash directory $trashdir is empty" &&  break
+  echo "Wating for trash dir to be empty: $timeout"
+  sleep 1
+  let "timeout-=1"
+done
+
+#Set the ratios back for other full tests to run
+ceph osd set-full-ratio 0.95
+ceph osd set-nearfull-ratio 0.95
+ceph osd set-backfillfull-ratio 0.95
+
+#After test
+echo "After test"
+df -h
+ceph osd df
+
+echo OK
diff --git a/qa/workunits/fs/full/subvolume_snapshot_rm.sh b/qa/workunits/fs/full/subvolume_snapshot_rm.sh
new file mode 100755
index 000000000..f6d0add9f
--- /dev/null
+++ b/qa/workunits/fs/full/subvolume_snapshot_rm.sh
@@ -0,0 +1,86 @@
+#!/usr/bin/env bash
+set -ex
+
+# This testcase tests the  'ceph fs subvolume snapshot rm' when the osd is full.
+# The snapshot rm fails with 'MetadataMgrException: -28 (error in write)' and
+# truncates the config file of corresponding subvolume. Hence the subsequent
+# snapshot rm of the same snapshot fails with 'MetadataMgrException: -2 (section 'GLOBAL' does not exist)'
+# traceback.
+
+# The osd is of the size 1GB. The subvolume is created and 800MB file is written.
+# Then full-ratios are set below 500MB such that the osd is treated as full.
+# The subvolume snapshot is taken which succeeds as no extra space is required
+# for snapshot. Now, the removal of the snapshot fails with ENOSPACE as it
+# fails to remove the snapshot metadata set. The snapshot removal fails
+# but should not traceback and truncate the config file.
+
+set -e
+expect_failure() {
+	if "$@"; then return 1; else return 0; fi
+}
+
+ignore_failure() {
+	if "$@"; then return 0; else return 0; fi
+}
+
+ceph fs subvolume create cephfs sub_0
+subvol_path=$(ceph fs subvolume getpath cephfs sub_0 2>/dev/null)
+
+#For debugging
+echo "Before write"
+df $CEPH_MNT
+ceph osd df
+
+# Write 800MB file and set full ratio to around 200MB
+ignore_failure sudo dd if=/dev/urandom of=$CEPH_MNT$subvol_path/800MB_file-1 status=progress bs=1M count=800 conv=fdatasync
+
+ceph osd set-full-ratio 0.2
+ceph osd set-nearfull-ratio 0.16
+ceph osd set-backfillfull-ratio 0.18
+
+timeout=30
+while [ $timeout -gt 0 ]
+do
+  health=$(ceph health detail)
+  [[ $health = *"OSD_FULL"* ]] && echo "OSD is full" && break
+  echo "Wating for osd to be full: $timeout"
+  sleep 1
+  let "timeout-=1"
+done
+
+#Take snapshot
+ceph fs subvolume snapshot create cephfs sub_0 snap_0
+
+#Remove snapshot fails but should not throw traceback
+expect_failure ceph fs subvolume snapshot rm cephfs sub_0 snap_0 2>/tmp/error_${PID}_file
+cat /tmp/error_${PID}_file
+
+# No traceback should be found
+expect_failure grep "Traceback" /tmp/error_${PID}_file
+
+# Validate config file is not truncated and GLOBAL section exists
+sudo grep "GLOBAL" $CEPH_MNT/volumes/_nogroup/sub_0/.meta
+
+#For debugging
+echo "After write"
+df $CEPH_MNT
+ceph osd df
+
+# Snapshot removal with force option should succeed
+ceph fs subvolume snapshot rm cephfs sub_0 snap_0 --force
+
+#Cleanup from backend
+ignore_failure sudo rm -f /tmp/error_${PID}_file
+ignore_failure sudo rm -rf $CEPH_MNT/volumes/_nogroup/sub_0
+
+#Set the ratios back for other full tests to run
+ceph osd set-full-ratio 0.95
+ceph osd set-nearfull-ratio 0.95
+ceph osd set-backfillfull-ratio 0.95
+
+#After test
+echo "After test"
+df -h $CEPH_MNT
+ceph osd df
+
+echo OK
diff --git a/qa/workunits/fs/maxentries/maxentries.sh b/qa/workunits/fs/maxentries/maxentries.sh
new file mode 100755
index 000000000..d48fd956e
--- /dev/null
+++ b/qa/workunits/fs/maxentries/maxentries.sh
@@ -0,0 +1,155 @@
+#!/usr/bin/env bash
+
+set -ex
+
+function expect_false()
+{
+	set -x
+	if "$@"; then return 1; else return 0; fi
+}
+
+function make_files()
+{
+  set +x
+  temp_dir=`mktemp -d mkfile_test_XXXXXX`
+  for i in $(seq 1 $1)
+  do
+    echo -n | dd of="${temp_dir}/file_$i" conv=fsync || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function make_dirs()
+{
+  set +x
+  temp_dir=`mktemp -d mkdir_test_XXXXXX`
+  for i in $(seq 1 $1)
+  do
+    mkdir -p ${temp_dir}/dir_${i} || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function make_nodes()
+{
+  set +x
+  temp_dir=`mktemp -d mknod_test_XXXXXX`
+  for i in $(seq 1 $1)
+  do
+    mknod ${temp_dir}/fifo_${i} p || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function rename_files()
+{
+  set +x
+  temp_dir=`mktemp -d rename_test_XXXXXX`
+  mkdir -p ${temp_dir}/rename
+
+  for i in $(seq 1 $1)
+  do
+    touch ${temp_dir}/file_${i} || return 1
+
+    mv ${temp_dir}/file_${i} ${temp_dir}/rename/ || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function make_symlinks()
+{
+  set +x
+  temp_dir=`mktemp -d symlink_test_XXXXXX`
+  mkdir -p ${temp_dir}/symlink 
+
+  touch ${temp_dir}/file
+
+  for i in $(seq 1 $1)
+  do
+    ln -s ../file ${temp_dir}/symlink/sym_${i} || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function make_links()
+{
+  set +x
+  temp_dir=`mktemp -d link_test_XXXXXX`
+  mkdir -p ${temp_dir}/link 
+
+  touch ${temp_dir}/file
+
+  for i in $(seq 1 $1)
+  do
+    ln ${temp_dir}/file ${temp_dir}/link/link_${i} || return 1
+    sync "${temp_dir}" || return 1
+  done
+  set -x
+  return 0
+}
+
+function cleanup()
+{
+  rm -rf *
+}
+
+test_dir="max_entries"
+mkdir -p $test_dir
+pushd $test_dir
+
+dir_max_entries=100
+ceph config set mds mds_dir_max_entries $dir_max_entries
+
+ok_dir_max_entries=$dir_max_entries
+fail_dir_max_entries=$((dir_max_entries+1))
+
+# make files test
+make_files $ok_dir_max_entries
+expect_false make_files $fail_dir_max_entries
+
+# make dirs test
+make_dirs $ok_dir_max_entries
+expect_false make_dirs $fail_dir_max_entries
+
+# make nodes test
+make_nodes $ok_dir_max_entries
+expect_false make_nodes $fail_dir_max_entries
+
+# rename files test
+rename_files $ok_dir_max_entries
+expect_false rename_files $fail_dir_max_entries
+
+# symlink files test
+make_symlinks $ok_dir_max_entries
+expect_false make_symlinks $fail_dir_max_entries
+
+# link files test
+make_links $ok_dir_max_entries
+expect_false make_links $fail_dir_max_entries
+
+# no limit (e.g., default value)
+dir_max_entries=0
+ceph config set mds mds_dir_max_entries $dir_max_entries
+
+make_files 500
+make_dirs 500
+make_nodes 500
+rename_files 500
+make_symlinks 500
+make_links 500
+
+cleanup
+
+popd # $test_dir
+
+echo OK
diff --git a/qa/workunits/fs/misc/acl.sh b/qa/workunits/fs/misc/acl.sh
new file mode 100755
index 000000000..198b05671
--- /dev/null
+++ b/qa/workunits/fs/misc/acl.sh
@@ -0,0 +1,50 @@
+#!/bin/sh -x
+
+set -e
+mkdir -p testdir
+cd testdir
+
+set +e
+setfacl -d -m u:nobody:rw .
+if test $? != 0; then
+	echo "Filesystem does not support ACL"
+	exit 0
+fi
+
+expect_failure() {
+	if "$@"; then return 1; else return 0; fi
+}
+
+set -e
+c=0
+while [ $c -lt 100  ]
+do
+	c=`expr $c + 1`
+	# inherited ACL from parent directory's default ACL
+	mkdir d1
+	c1=`getfacl d1 | grep -c "nobody:rw"`
+	echo 3 | sudo tee /proc/sys/vm/drop_caches > /dev/null
+	c2=`getfacl d1 | grep -c "nobody:rw"`
+	rmdir d1
+	if [ $c1 -ne 2 ] || [ $c2 -ne 2 ]
+	then
+		echo "ERROR: incorrect ACLs"
+		exit 1
+	fi
+done
+
+mkdir d1
+
+# The ACL xattr only contains ACL header. ACL should be removed
+# in this case.
+setfattr -n system.posix_acl_access -v 0x02000000 d1
+setfattr -n system.posix_acl_default -v 0x02000000 .
+
+expect_failure getfattr -n system.posix_acl_access d1
+expect_failure getfattr -n system.posix_acl_default .
+
+
+rmdir d1
+cd ..
+rmdir testdir
+echo OK
diff --git a/qa/workunits/fs/misc/chmod.sh b/qa/workunits/fs/misc/chmod.sh
new file mode 100755
index 000000000..de66776f1
--- /dev/null
+++ b/qa/workunits/fs/misc/chmod.sh
@@ -0,0 +1,60 @@
+#!/bin/sh -x
+
+set -e
+
+check_perms() {
+
+	file=$1
+	r=$(ls -la ${file})
+	if test $? != 0; then
+		echo "ERROR: File listing/stat failed"
+		exit 1
+	fi
+
+	perms=$2
+	if test "${perms}" != $(echo ${r} | awk '{print $1}') && \
+           test "${perms}." != $(echo ${r} | awk '{print $1}') && \
+           test "${perms}+" != $(echo ${r} | awk '{print $1}'); then
+		echo "ERROR: Permissions should be ${perms}"
+		exit 1
+	fi
+}
+
+file=test_chmod.$$
+
+echo "foo" > ${file}
+if test $? != 0; then
+	echo "ERROR: Failed to create file ${file}"
+	exit 1
+fi
+
+chmod 400 ${file}
+if test $? != 0; then
+	echo "ERROR: Failed to change mode of ${file}"
+	exit 1
+fi
+
+check_perms ${file} "-r--------"
+
+set +e
+echo "bar" >> ${file}
+if test $? = 0; then
+	echo "ERROR: Write to read-only file should Fail"
+	exit 1
+fi
+
+set -e
+chmod 600 ${file}
+echo "bar" >> ${file}
+if test $? != 0; then
+	echo "ERROR: Write to writeable file failed"
+	exit 1
+fi
+
+check_perms ${file} "-rw-------"
+
+echo "foo" >> ${file}
+if test $? != 0; then
+	echo "ERROR: Failed to write to file"
+	exit 1
+fi
diff --git a/qa/workunits/fs/misc/dac_override.sh b/qa/workunits/fs/misc/dac_override.sh
new file mode 100755
index 000000000..dfb1a9091
--- /dev/null
+++ b/qa/workunits/fs/misc/dac_override.sh
@@ -0,0 +1,19 @@
+#!/bin/sh -x
+
+expect_failure() {
+	if "$@"; then return 1; else return 0; fi
+}
+
+set -e
+
+mkdir -p testdir
+file=test_chmod.$$
+
+echo "foo" > testdir/${file}
+sudo chmod 600 testdir
+
+# only root can read
+expect_failure cat testdir/${file}
+
+# directory read/write DAC override for root should allow read
+sudo cat testdir/${file}
diff --git a/qa/workunits/fs/misc/direct_io.py b/qa/workunits/fs/misc/direct_io.py
new file mode 100755
index 000000000..f7d59d95a
--- /dev/null
+++ b/qa/workunits/fs/misc/direct_io.py
@@ -0,0 +1,42 @@
+#!/usr/bin/python3
+
+import mmap
+import os
+import subprocess
+
+def main():
+    path = "testfile"
+    fd = os.open(path, os.O_RDWR | os.O_CREAT | os.O_TRUNC | os.O_DIRECT, 0o644)
+
+    ino = os.fstat(fd).st_ino
+    obj_name = "{ino:x}.00000000".format(ino=ino)
+    pool_name = os.getxattr(path, "ceph.file.layout.pool")
+
+    buf = mmap.mmap(-1, 1)
+    buf.write(b'1')
+    os.write(fd, buf)
+
+    proc = subprocess.Popen(['rados', '-p', pool_name, 'get', obj_name, 'tmpfile'])
+    proc.wait()
+
+    with open('tmpfile', 'rb') as tmpf:
+        out = tmpf.read(1)
+        if out != b'1':
+            raise RuntimeError("data were not written to object store directly")
+
+    with open('tmpfile', 'wb') as tmpf:
+        tmpf.write(b'2')
+
+    proc = subprocess.Popen(['rados', '-p', pool_name, 'put', obj_name, 'tmpfile'])
+    proc.wait()
+
+    os.lseek(fd, 0, os.SEEK_SET)
+    out = os.read(fd, 1)
+    if out != b'2':
+        raise RuntimeError("data were not directly read from object store")
+
+    os.close(fd)
+    print('ok')
+
+
+main()
diff --git a/qa/workunits/fs/misc/dirfrag.sh b/qa/workunits/fs/misc/dirfrag.sh
new file mode 100755
index 000000000..eea0ec3bc
--- /dev/null
+++ b/qa/workunits/fs/misc/dirfrag.sh
@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+
+set -e
+
+DEPTH=5
+COUNT=10000
+
+kill_jobs() {
+  jobs -p | xargs kill
+}
+trap kill_jobs INT
+
+create_files() {
+  for i in `seq 1 $COUNT`
+  do
+    touch file$i
+  done
+}
+
+delete_files() {
+  for i in `ls -f`
+  do
+    if [[ ${i}a = file*a ]]
+    then
+      rm -f $i
+    fi
+  done
+}
+
+rm -rf testdir
+mkdir testdir
+cd testdir
+
+echo "creating folder hierarchy"
+for i in `seq 1 $DEPTH`; do
+  mkdir dir$i
+  cd dir$i
+  create_files &
+done
+wait
+
+echo "created hierarchy, now cleaning up"
+
+for i in `seq 1 $DEPTH`; do
+  delete_files &
+  cd ..
+done
+wait
+
+echo "cleaned up hierarchy"
+cd ..
+rm -rf testdir
diff --git a/qa/workunits/fs/misc/filelock_deadlock.py b/qa/workunits/fs/misc/filelock_deadlock.py
new file mode 100755
index 000000000..398902f6c
--- /dev/null
+++ b/qa/workunits/fs/misc/filelock_deadlock.py
@@ -0,0 +1,72 @@
+#!/usr/bin/python3
+
+import errno
+import fcntl
+import os
+import signal
+import struct
+import time
+
+
+def handler(signum, frame):
+    pass
+
+
+def lock_two(f1, f2):
+    lockdata = struct.pack('hhllhh', fcntl.F_WRLCK, 0, 0, 10, 0, 0)
+    fcntl.fcntl(f1, fcntl.F_SETLKW, lockdata)
+    time.sleep(10)
+
+    # don't wait forever
+    signal.signal(signal.SIGALRM, handler)
+    signal.alarm(10)
+    exitcode = 0
+    try:
+        fcntl.fcntl(f2, fcntl.F_SETLKW, lockdata)
+    except IOError as e:
+        if e.errno == errno.EDEADLK:
+            exitcode = 1
+        elif e.errno == errno.EINTR:
+            exitcode = 2
+        else:
+            exitcode = 3
+    os._exit(exitcode)
+
+
+def main():
+    pid1 = os.fork()
+    if pid1 == 0:
+        f1 = open("testfile1", 'w')
+        f2 = open("testfile2", 'w')
+        lock_two(f1, f2)
+
+    pid2 = os.fork()
+    if pid2 == 0:
+        f1 = open("testfile2", 'w')
+        f2 = open("testfile3", 'w')
+        lock_two(f1, f2)
+
+    pid3 = os.fork()
+    if pid3 == 0:
+        f1 = open("testfile3", 'w')
+        f2 = open("testfile1", 'w')
+        lock_two(f1, f2)
+
+    deadlk_count = 0
+    i = 0
+    while i < 3:
+        pid, status = os.wait()
+        exitcode = status >> 8
+        if exitcode == 1:
+            deadlk_count += 1
+        elif exitcode != 0:
+            raise RuntimeError("unexpect exit code of child")
+        i += 1
+
+    if deadlk_count != 1:
+        raise RuntimeError("unexpect count of EDEADLK")
+
+    print('ok')
+
+
+main()
diff --git a/qa/workunits/fs/misc/filelock_interrupt.py b/qa/workunits/fs/misc/filelock_interrupt.py
new file mode 100755
index 000000000..b261d74fb
--- /dev/null
+++ b/qa/workunits/fs/misc/filelock_interrupt.py
@@ -0,0 +1,94 @@
+#!/usr/bin/python3
+
+from contextlib import contextmanager
+import errno
+import fcntl
+import signal
+import struct
+
+@contextmanager
+def timeout(seconds):
+    def timeout_handler(signum, frame):
+        raise InterruptedError
+
+    orig_handler = signal.signal(signal.SIGALRM, timeout_handler)
+    try:
+        signal.alarm(seconds)
+        yield
+    finally:
+        signal.alarm(0)
+        signal.signal(signal.SIGALRM, orig_handler)
+
+
+"""
+introduced by Linux 3.15
+"""
+setattr(fcntl, "F_OFD_GETLK", 36)
+setattr(fcntl, "F_OFD_SETLK", 37)
+setattr(fcntl, "F_OFD_SETLKW", 38)
+
+
+def main():
+    f1 = open("testfile", 'w')
+    f2 = open("testfile", 'w')
+
+    fcntl.flock(f1, fcntl.LOCK_SH | fcntl.LOCK_NB)
+
+    """
+    is flock interruptible?
+    """
+    with timeout(5):
+        try:
+            fcntl.flock(f2, fcntl.LOCK_EX)
+        except InterruptedError:
+            pass
+        else:
+            raise RuntimeError("expect flock to block")
+
+    fcntl.flock(f1, fcntl.LOCK_UN)
+
+    lockdata = struct.pack('hhllhh', fcntl.F_WRLCK, 0, 0, 10, 0, 0)
+    try:
+        fcntl.fcntl(f1, fcntl.F_OFD_SETLK, lockdata)
+    except IOError as e:
+        if e.errno != errno.EINVAL:
+            raise
+        else:
+            print('kernel does not support fcntl.F_OFD_SETLK')
+            return
+
+    lockdata = struct.pack('hhllhh', fcntl.F_WRLCK, 0, 10, 10, 0, 0)
+    fcntl.fcntl(f2, fcntl.F_OFD_SETLK, lockdata)
+
+    """
+    is posix lock interruptible?
+    """
+    with timeout(5):
+        try:
+            lockdata = struct.pack('hhllhh', fcntl.F_WRLCK, 0, 0, 0, 0, 0)
+            fcntl.fcntl(f2, fcntl.F_OFD_SETLKW, lockdata)
+        except InterruptedError:
+            pass
+        else:
+            raise RuntimeError("expect posix lock to block")
+
+    """
+    file handler 2 should still hold lock on 10~10
+    """
+    try:
+        lockdata = struct.pack('hhllhh', fcntl.F_WRLCK, 0, 10, 10, 0, 0)
+        fcntl.fcntl(f1, fcntl.F_OFD_SETLK, lockdata)
+    except IOError as e:
+        if e.errno == errno.EAGAIN:
+            pass
+    else:
+        raise RuntimeError("expect file handler 2 to hold lock on 10~10")
+
+    lockdata = struct.pack('hhllhh', fcntl.F_UNLCK, 0, 0, 0, 0, 0)
+    fcntl.fcntl(f1, fcntl.F_OFD_SETLK, lockdata)
+    fcntl.fcntl(f2, fcntl.F_OFD_SETLK, lockdata)
+
+    print('ok')
+
+
+main()
diff --git a/qa/workunits/fs/misc/i_complete_vs_rename.sh b/qa/workunits/fs/misc/i_complete_vs_rename.sh
new file mode 100755
index 000000000..a9b98271d
--- /dev/null
+++ b/qa/workunits/fs/misc/i_complete_vs_rename.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+
+set -e
+
+mkdir x
+cd x
+touch a
+touch b
+touch c
+touch d
+ls
+chmod 777 .
+stat e || true
+touch f
+touch g
+
+# over existing file
+echo attempting rename over existing file...
+touch ../xx
+mv ../xx f
+ls | grep f || false
+echo rename over existing file is okay
+
+# over negative dentry
+echo attempting rename over negative dentry...
+touch ../xx
+mv ../xx e
+ls | grep e || false
+echo rename over negative dentry is ok
+
+echo OK
diff --git a/qa/workunits/fs/misc/layout_vxattrs.sh b/qa/workunits/fs/misc/layout_vxattrs.sh
new file mode 100755
index 000000000..811336273
--- /dev/null
+++ b/qa/workunits/fs/misc/layout_vxattrs.sh
@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+
+set -ex
+
+# detect data pool
+datapool=
+dir=.
+while true ; do
+    echo $dir
+    datapool=$(getfattr -n ceph.dir.layout.pool $dir --only-values) && break
+    dir=$dir/..
+done
+
+# file
+rm -f file file2
+touch file file2
+
+getfattr -n ceph.file.layout file
+getfattr -n ceph.file.layout file | grep -q object_size=
+getfattr -n ceph.file.layout file | grep -q stripe_count=
+getfattr -n ceph.file.layout file | grep -q stripe_unit=
+getfattr -n ceph.file.layout file | grep -q pool=
+getfattr -n ceph.file.layout.pool file
+getfattr -n ceph.file.layout.pool_namespace file
+getfattr -n ceph.file.layout.stripe_unit file
+getfattr -n ceph.file.layout.stripe_count file
+getfattr -n ceph.file.layout.object_size file
+
+getfattr -n ceph.file.layout.bogus file   2>&1 | grep -q 'No such attribute'
+getfattr -n ceph.dir.layout file    2>&1 | grep -q 'No such attribute'
+
+setfattr -n ceph.file.layout.stripe_unit -v 1048576 file2
+setfattr -n ceph.file.layout.stripe_count -v 8 file2
+setfattr -n ceph.file.layout.object_size -v 10485760 file2
+
+setfattr -n ceph.file.layout.pool -v $datapool file2
+getfattr -n ceph.file.layout.pool file2 | grep -q $datapool
+setfattr -n ceph.file.layout.pool_namespace -v foons file2
+getfattr -n ceph.file.layout.pool_namespace file2 | grep -q foons
+setfattr -x ceph.file.layout.pool_namespace file2
+getfattr -n ceph.file.layout.pool_namespace file2 | grep -q -v foons
+
+getfattr -n ceph.file.layout.stripe_unit file2 | grep -q 1048576
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 8
+getfattr -n ceph.file.layout.object_size file2 | grep -q 10485760
+
+setfattr -n ceph.file.layout -v "stripe_unit=4194304 stripe_count=16 object_size=41943040 pool=$datapool pool_namespace=foons" file2
+getfattr -n ceph.file.layout.stripe_unit file2 | grep -q 4194304
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 16
+getfattr -n ceph.file.layout.object_size file2 | grep -q 41943040
+getfattr -n ceph.file.layout.pool file2 | grep -q $datapool
+getfattr -n ceph.file.layout.pool_namespace file2 | grep -q foons
+
+setfattr -n ceph.file.layout -v "stripe_unit=1048576" file2
+getfattr -n ceph.file.layout.stripe_unit file2 | grep -q 1048576
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 16
+getfattr -n ceph.file.layout.object_size file2 | grep -q 41943040
+getfattr -n ceph.file.layout.pool file2 | grep -q $datapool
+getfattr -n ceph.file.layout.pool_namespace file2 | grep -q foons
+
+setfattr -n ceph.file.layout -v "stripe_unit=2097152 stripe_count=4 object_size=2097152 pool=$datapool pool_namespace=barns" file2
+getfattr -n ceph.file.layout.stripe_unit file2 | grep -q 2097152
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 4
+getfattr -n ceph.file.layout.object_size file2 | grep -q 2097152
+getfattr -n ceph.file.layout.pool file2 | grep -q $datapool
+getfattr -n ceph.file.layout.pool_namespace file2 | grep -q barns
+
+# dir
+rm -f dir/file || true
+rmdir dir || true
+mkdir -p dir
+
+getfattr -d -m - dir | grep -q ceph.dir.layout       && exit 1 || true
+getfattr -d -m - dir | grep -q ceph.file.layout      && exit 1 || true
+getfattr -n ceph.dir.layout dir                      && exit 1 || true
+
+setfattr -n ceph.dir.layout.stripe_unit -v 1048576 dir
+setfattr -n ceph.dir.layout.stripe_count -v 8 dir
+setfattr -n ceph.dir.layout.object_size -v 10485760 dir
+setfattr -n ceph.dir.layout.pool -v $datapool dir
+setfattr -n ceph.dir.layout.pool_namespace -v dirns dir
+
+getfattr -n ceph.dir.layout dir
+getfattr -n ceph.dir.layout dir | grep -q object_size=10485760
+getfattr -n ceph.dir.layout dir | grep -q stripe_count=8
+getfattr -n ceph.dir.layout dir | grep -q stripe_unit=1048576
+getfattr -n ceph.dir.layout dir | grep -q pool=$datapool
+getfattr -n ceph.dir.layout dir | grep -q pool_namespace=dirns
+getfattr -n ceph.dir.layout.pool dir | grep -q $datapool
+getfattr -n ceph.dir.layout.stripe_unit dir | grep -q 1048576
+getfattr -n ceph.dir.layout.stripe_count dir | grep -q 8
+getfattr -n ceph.dir.layout.object_size dir | grep -q 10485760
+getfattr -n ceph.dir.layout.pool_namespace dir | grep -q dirns
+
+
+setfattr -n ceph.file.layout -v "stripe_count=16" file2
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 16
+setfattr -n ceph.file.layout -v "object_size=10485760 stripe_count=8 stripe_unit=1048576 pool=$datapool pool_namespace=dirns" file2
+getfattr -n ceph.file.layout.stripe_count file2 | grep -q 8
+
+touch dir/file
+getfattr -n ceph.file.layout.pool dir/file | grep -q $datapool
+getfattr -n ceph.file.layout.stripe_unit dir/file | grep -q 1048576
+getfattr -n ceph.file.layout.stripe_count dir/file | grep -q 8
+getfattr -n ceph.file.layout.object_size dir/file | grep -q 10485760
+getfattr -n ceph.file.layout.pool_namespace dir/file | grep -q dirns
+
+setfattr -x ceph.dir.layout.pool_namespace dir
+getfattr -n ceph.dir.layout dir | grep -q -v pool_namespace=dirns
+
+setfattr -x ceph.dir.layout dir
+getfattr -n ceph.dir.layout dir     2>&1 | grep -q 'No such attribute'
+
+echo OK
+
diff --git a/qa/workunits/fs/misc/mkpool_layout_vxattrs.sh b/qa/workunits/fs/misc/mkpool_layout_vxattrs.sh
new file mode 100755
index 000000000..6b2fecbc0
--- /dev/null
+++ b/qa/workunits/fs/misc/mkpool_layout_vxattrs.sh
@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+
+set -e
+
+touch foo.$$
+ceph osd pool create foo.$$ 8
+ceph fs add_data_pool cephfs foo.$$
+setfattr -n ceph.file.layout.pool -v foo.$$ foo.$$
+
+# cleanup
+rm foo.$$
+ceph fs rm_data_pool cephfs foo.$$
+ceph osd pool rm foo.$$ foo.$$ --yes-i-really-really-mean-it
+
+echo OK
diff --git a/qa/workunits/fs/misc/multiple_rsync.sh b/qa/workunits/fs/misc/multiple_rsync.sh
new file mode 100755
index 000000000..4397c1e7f
--- /dev/null
+++ b/qa/workunits/fs/misc/multiple_rsync.sh
@@ -0,0 +1,25 @@
+#!/bin/sh -ex
+
+
+# Populate with some arbitrary files from the local system.  Take
+# a copy to protect against false fails from system updates during test.
+export PAYLOAD=/tmp/multiple_rsync_payload.$$
+sudo cp -r /usr/lib/ $PAYLOAD
+
+set -e
+
+sudo rsync -av $PAYLOAD payload.1
+sudo rsync -av $PAYLOAD payload.2
+
+# this shouldn't transfer any additional files
+echo we should get 4 here if no additional files are transferred
+sudo rsync -auv $PAYLOAD payload.1 | tee /tmp/$$
+hexdump -C /tmp/$$
+wc -l /tmp/$$ | grep 4
+sudo rsync -auv $PAYLOAD payload.2 | tee /tmp/$$
+hexdump -C /tmp/$$
+wc -l /tmp/$$ | grep 4
+echo OK
+
+rm /tmp/$$
+sudo rm -rf $PAYLOAD
diff --git a/qa/workunits/fs/misc/rstats.sh b/qa/workunits/fs/misc/rstats.sh
new file mode 100755
index 000000000..e6b3eddf2
--- /dev/null
+++ b/qa/workunits/fs/misc/rstats.sh
@@ -0,0 +1,80 @@
+#!/usr/bin/env bash
+
+set -x
+
+timeout=30
+old_value=""
+new_value=""
+
+wait_until_changed() {
+	name=$1
+	wait=0
+	while [ $wait -lt $timeout ]; do
+		new_value=`getfattr --only-value -n ceph.dir.$name .`
+		[ $new_value == $old_value ] || return 0
+		sleep 1
+		wait=$(($wait + 1))
+	done
+	return 1
+}
+
+check_rctime() {
+	old_sec=$(echo $old_value | cut -d. -f1)
+	old_nsec=$(echo $old_value | cut -d. -f2)
+	new_sec=$(echo $new_value | cut -d. -f1)
+	new_nsec=$(echo $new_value | cut -d. -f2)
+	[ "$old_sec" -lt "$new_sec" ] && return 0
+	[ "$old_sec" -gt "$new_sec" ] && return 1
+	[ "$old_nsec" -lt "$new_nsec" ] && return 0
+	return 1
+}
+
+# sync(3) does not make ceph-fuse flush dirty caps, because fuse kernel module
+# does not notify ceph-fuse about it. Use fsync(3) instead.
+fsync_path() {
+	cmd="import os; fd=os.open(\"$1\", os.O_RDONLY); os.fsync(fd); os.close(fd)"
+	python3 -c "$cmd"
+}
+
+set -e
+
+mkdir -p rstats_testdir/d1/d2
+cd rstats_testdir
+
+# rfiles
+old_value=`getfattr --only-value -n ceph.dir.rfiles .`
+[ $old_value == 0 ] || false
+touch d1/d2/f1
+wait_until_changed rfiles
+[ $new_value == $(($old_value + 1)) ] || false
+
+# rsubdirs
+old_value=`getfattr --only-value -n ceph.dir.rsubdirs .`
+[ $old_value == 3 ] || false
+mkdir d1/d2/d3
+wait_until_changed rsubdirs
+[ $new_value == $(($old_value + 1)) ] || false
+
+# rbytes
+old_value=`getfattr --only-value -n ceph.dir.rbytes .`
+[ $old_value == 0 ] || false
+echo hello > d1/d2/f2
+fsync_path d1/d2/f2
+wait_until_changed rbytes
+[ $new_value == $(($old_value + 6)) ] || false
+
+#rctime
+old_value=`getfattr --only-value -n ceph.dir.rctime .`
+touch d1/d2/d3 # touch existing file
+fsync_path d1/d2/d3
+wait_until_changed rctime
+check_rctime
+
+old_value=`getfattr --only-value -n ceph.dir.rctime .`
+touch d1/d2/f3 # create new file
+wait_until_changed rctime
+check_rctime
+
+cd ..
+rm -rf rstats_testdir
+echo OK
diff --git a/qa/workunits/fs/misc/trivial_sync.sh b/qa/workunits/fs/misc/trivial_sync.sh
new file mode 100755
index 000000000..7c8c4e2b4
--- /dev/null
+++ b/qa/workunits/fs/misc/trivial_sync.sh
@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+set -e
+
+mkdir foo
+echo foo > bar
+sync
diff --git a/qa/workunits/fs/misc/xattrs.sh b/qa/workunits/fs/misc/xattrs.sh
new file mode 100755
index 000000000..fcd94d22c
--- /dev/null
+++ b/qa/workunits/fs/misc/xattrs.sh
@@ -0,0 +1,14 @@
+#!/bin/sh -x
+
+set -e
+
+touch file
+
+setfattr -n user.foo -v foo file
+setfattr -n user.bar -v bar file
+setfattr -n user.empty file
+getfattr -d file | grep foo
+getfattr -d file | grep bar
+getfattr -d file | grep empty
+
+echo OK.
diff --git a/qa/workunits/fs/multiclient_sync_read_eof.py b/qa/workunits/fs/multiclient_sync_read_eof.py
new file mode 100755
index 000000000..15ecbb825
--- /dev/null
+++ b/qa/workunits/fs/multiclient_sync_read_eof.py
@@ -0,0 +1,42 @@
+#!/usr/bin/python3
+
+import argparse
+import os
+
+def main():
+    parser = argparse.ArgumentParser()
+    parser.add_argument('mnt1')
+    parser.add_argument('mnt2')
+    parser.add_argument('fn')
+    args = parser.parse_args()
+
+    open(os.path.join(args.mnt1, args.fn), 'w')
+    f1 = open(os.path.join(args.mnt1, args.fn), 'r+')
+    f2 = open(os.path.join(args.mnt2, args.fn), 'r+')
+
+    f1.write('foo')
+    f1.flush()
+    a = f2.read(3)
+    print('got "%s"' % a)
+    assert a == 'foo'
+    f2.write('bar')
+    f2.flush()
+    a = f1.read(3)
+    print('got "%s"' % a)
+    assert a == 'bar'
+
+    ## test short reads
+    f1.write('short')
+    f1.flush()
+    a = f2.read(100)
+    print('got "%s"' % a)
+    assert a == 'short'
+    f2.write('longer')
+    f2.flush()
+    a = f1.read(1000)
+    print('got "%s"' % a)
+    assert a == 'longer'
+
+    print('ok')
+
+main()
diff --git a/qa/workunits/fs/norstats/kernel_untar_tar.sh b/qa/workunits/fs/norstats/kernel_untar_tar.sh
new file mode 100755
index 000000000..6a175dcd9
--- /dev/null
+++ b/qa/workunits/fs/norstats/kernel_untar_tar.sh
@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+# check if there is file changed while being archived
+
+set -e
+
+KERNEL=linux-4.0.5
+
+wget -q http://download.ceph.com/qa/$KERNEL.tar.xz
+
+mkdir untar_tar
+cd untar_tar
+
+tar Jxvf ../$KERNEL.tar.xz $KERNEL/Documentation/
+tar cf doc.tar $KERNEL
+
+tar xf doc.tar
+sync
+tar c $KERNEL >/dev/null
+
+rm -rf $KERNEL
+
+tar xf doc.tar
+sync
+tar c $KERNEL >/dev/null
+
+echo Ok
diff --git a/qa/workunits/fs/quota/quota.sh b/qa/workunits/fs/quota/quota.sh
new file mode 100755
index 000000000..1315be6d8
--- /dev/null
+++ b/qa/workunits/fs/quota/quota.sh
@@ -0,0 +1,128 @@
+#!/usr/bin/env bash
+
+set -ex
+
+function expect_false()
+{
+	set -x
+	if "$@"; then return 1; else return 0; fi
+}
+
+function write_file()
+{
+	set +x
+	for ((i=1;i<=$2;i++))
+	do
+		dd if=/dev/zero of=$1 bs=1M count=1 conv=notrunc oflag=append 2>/dev/null >/dev/null
+		if [ $? != 0 ]; then
+			echo Try to write $(($i * 1048576))
+			set -x
+			return 1
+		fi
+		sleep 0.05
+	done
+	set -x
+	return 0
+}
+
+mkdir quota-test
+cd quota-test
+
+# bytes
+setfattr . -n ceph.quota.max_bytes -v 100000000  # 100m
+expect_false write_file big 1000     # 1g
+expect_false write_file second 10
+setfattr . -n ceph.quota.max_bytes -v 0
+dd if=/dev/zero of=third bs=1M count=10
+dd if=/dev/zero of=big2 bs=1M count=100
+
+
+rm -rf *
+
+# files
+setfattr . -n ceph.quota.max_files -v 5
+mkdir ok
+touch ok/1
+touch ok/2
+touch 3
+expect_false touch shouldbefail     #  5 files will include the "."
+expect_false touch ok/shouldbefail  #  5 files will include the "."
+setfattr . -n ceph.quota.max_files -v 0
+touch shouldbecreated
+touch shouldbecreated2
+
+
+rm -rf *
+
+# mix
+mkdir bytes bytes/files
+
+setfattr bytes -n ceph.quota.max_bytes -v 10000000   #10m
+setfattr bytes/files -n ceph.quota.max_files -v 5
+dd if=/dev/zero of=bytes/files/1 bs=1M count=4
+dd if=/dev/zero of=bytes/files/2 bs=1M count=4
+expect_false write_file bytes/files/3 1000
+expect_false write_file bytes/files/4 1000
+expect_false write_file bytes/files/5 1000
+stat --printf="%n %s\n" bytes/files/1 #4M
+stat --printf="%n %s\n" bytes/files/2 #4M
+stat --printf="%n %s\n" bytes/files/3 #bigger than 2M
+stat --printf="%n %s\n" bytes/files/4 #should be zero
+expect_false stat bytes/files/5       #shouldn't be exist
+
+
+
+
+rm -rf *
+
+#mv
+mkdir files limit
+truncate files/file -s 10G
+setfattr limit -n ceph.quota.max_bytes -v 1000000 #1m
+expect_false mv files limit/
+
+
+
+rm -rf *
+
+#limit by ancestor
+
+mkdir -p ancestor/p1/p2/parent/p3
+setfattr ancestor -n ceph.quota.max_bytes -v 1000000
+setfattr ancestor/p1/p2/parent -n ceph.quota.max_bytes -v 1000000000 #1g
+expect_false write_file ancestor/p1/p2/parent/p3/file1 900 #900m
+stat --printf="%n %s\n" ancestor/p1/p2/parent/p3/file1
+
+
+#get/set attribute
+
+setfattr -n ceph.quota.max_bytes -v 0 .
+setfattr -n ceph.quota.max_bytes -v 1 .
+setfattr -n ceph.quota.max_bytes -v 9223372036854775807 .
+expect_false setfattr -n ceph.quota.max_bytes -v 9223372036854775808 .
+expect_false setfattr -n ceph.quota.max_bytes -v -1 .
+expect_false setfattr -n ceph.quota.max_bytes -v -9223372036854775808 .
+expect_false setfattr -n ceph.quota.max_bytes -v -9223372036854775809 .
+
+setfattr -n ceph.quota.max_files -v 0 .
+setfattr -n ceph.quota.max_files -v 1 .
+setfattr -n ceph.quota.max_files -v 9223372036854775807 .
+expect_false setfattr -n ceph.quota.max_files -v 9223372036854775808 .
+expect_false setfattr -n ceph.quota.max_files -v -1 .
+expect_false setfattr -n ceph.quota.max_files -v -9223372036854775808 .
+expect_false setfattr -n ceph.quota.max_files -v -9223372036854775809 .
+
+setfattr -n ceph.quota -v "max_bytes=0 max_files=0" .
+setfattr -n ceph.quota -v "max_bytes=1 max_files=0" .
+setfattr -n ceph.quota -v "max_bytes=0 max_files=1" .
+setfattr -n ceph.quota -v "max_bytes=1 max_files=1" .
+expect_false setfattr -n ceph.quota -v "max_bytes=-1 max_files=0" .
+expect_false setfattr -n ceph.quota -v "max_bytes=0 max_files=-1" .
+expect_false setfattr -n ceph.quota -v "max_bytes=-1 max_files=-1" .
+
+#addme
+
+cd ..
+rm -rf quota-test
+
+echo OK
diff --git a/qa/workunits/fs/snap-hierarchy.sh b/qa/workunits/fs/snap-hierarchy.sh
new file mode 100755
index 000000000..67f0e014b
--- /dev/null
+++ b/qa/workunits/fs/snap-hierarchy.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+set -ex
+
+if [ -d "$1" ]; then
+  mkdir -p -- "$1" && cd "$1"
+fi
+
+[ "$VERIFY" != verify ] && mkdir 1
+[ "$VERIFY" != verify ] && mkdir 1/.snap/first
+stat 1/.snap/first
+[ "$VERIFY" != verify ] && mkdir 1/2
+stat 1/.snap/first/2 && exit 1
+[ "$VERIFY" != verify ] && mkdir 1/2/.snap/second
+stat 1/2/.snap/second
+[ "$VERIFY" != verify ] && touch 1/foo
+stat 1/.snap/first/foo && exit 1
+[ "$VERIFY" != verify ] && mkdir 1/.snap/third
+stat 1/.snap/third/foo || exit 1
+[ "$VERIFY" != verify ] && mkdir 1/2/3
+[ "$VERIFY" != verify ] && mkdir 1/2/.snap/fourth
+stat 1/2/.snap/fourth/3
+
+exit 0
diff --git a/qa/workunits/fs/snaps/snap-rm-diff.sh b/qa/workunits/fs/snaps/snap-rm-diff.sh
new file mode 100755
index 000000000..30ffa9113
--- /dev/null
+++ b/qa/workunits/fs/snaps/snap-rm-diff.sh
@@ -0,0 +1,10 @@
+#!/bin/sh -ex
+
+wget -q http://download.ceph.com/qa/linux-2.6.33.tar.bz2
+mkdir foo
+cp linux* foo
+mkdir foo/.snap/barsnap
+rm foo/linux*
+diff -q foo/.snap/barsnap/linux* linux* && echo "passed: files are identical"
+rmdir foo/.snap/barsnap
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-1.sh b/qa/workunits/fs/snaps/snaptest-1.sh
new file mode 100755
index 000000000..431e83387
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-1.sh
@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+set -ex
+
+echo 1 > file1
+echo 2 > file2
+echo 3 > file3
+[ -e file4 ] && rm file4
+mkdir .snap/snap1
+echo 4 > file4
+now=`ls`
+then=`ls .snap/snap1`
+rmdir .snap/snap1
+if [ "$now" = "$then" ]; then
+    echo live and snap contents are identical?
+    false
+fi
+
+# do it again
+echo 1 > file1
+echo 2 > file2
+echo 3 > file3
+mkdir .snap/snap1
+echo 4 > file4
+rmdir .snap/snap1
+
+rm file?
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-2.sh b/qa/workunits/fs/snaps/snaptest-2.sh
new file mode 100755
index 000000000..11fe9316a
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-2.sh
@@ -0,0 +1,59 @@
+#!/usr/bin/env bash
+
+echo "Create dir 100 to 199 ..."
+for i in $(seq 100 199); do
+	echo "    create dir $i"
+	mkdir "$i"
+	for y in $(seq 10 20); do
+		echo "This is a test file before any snapshot was taken." >"$i/$y"
+	done
+done
+
+echo "Take first snapshot .snap/test1"
+mkdir .snap/test1
+
+echo "Create dir 200 to 299 ..."
+for i in $(seq 200 299); do
+	echo "    create dir $i"
+        mkdir $i
+        for y in $(seq 20 29); do
+                echo "This is a test file. Created after .snap/test1" >"$i/$y"
+        done
+done
+
+echo "Create a snapshot in every first level dir ..."
+for dir in $(ls); do
+	echo "    create $dir/.snap/snap-subdir-test"
+	mkdir "$dir/.snap/snap-subdir-test"
+	for y in $(seq 30 39); do
+		echo "        create $dir/$y file after the snapshot"
+                echo "This is a test file. Created after $dir/.snap/snap-subdir-test" >"$dir/$y"
+        done
+done
+
+echo "Take second snapshot .snap/test2"
+mkdir .snap/test2
+
+echo "Copy content of .snap/test1 to copyofsnap1 ..."
+mkdir copyofsnap1
+cp -Rv .snap/test1 copyofsnap1/
+
+
+echo "Take third snapshot .snap/test3"
+mkdir .snap/test3
+
+echo "Delete the snapshots..."
+
+find ./ -type d -print | \
+        xargs -I% -n1 find %/.snap -mindepth 1 -maxdepth 1 \
+                         \( ! -name "_*" \) -print 2>/dev/null
+
+find ./ -type d -print | \
+	xargs -I% -n1 find %/.snap -mindepth 1 -maxdepth 1 \
+                         \( ! -name "_*" \) -print 2>/dev/null | \
+	xargs -n1 rmdir
+
+echo "Delete all the files and directories ..."
+rm -Rfv ./*
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-authwb.sh b/qa/workunits/fs/snaps/snaptest-authwb.sh
new file mode 100755
index 000000000..965ee8512
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-authwb.sh
@@ -0,0 +1,12 @@
+#!/bin/sh -x
+
+set -e
+
+touch foo
+chmod +x foo
+mkdir .snap/s
+find .snap/s/foo -executable | grep foo
+rmdir .snap/s
+rm foo
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-capwb.sh b/qa/workunits/fs/snaps/snaptest-capwb.sh
new file mode 100755
index 000000000..d26f324b6
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-capwb.sh
@@ -0,0 +1,33 @@
+#!/bin/sh -x
+
+set -e
+
+mkdir foo
+
+# make sure mds handles it when the client does not send flushsnap
+echo x > foo/x
+sync
+mkdir foo/.snap/ss
+ln foo/x foo/xx
+cat foo/.snap/ss/x
+rmdir foo/.snap/ss
+
+#
+echo a > foo/a
+echo b > foo/b
+mkdir foo/.snap/s
+r=`cat foo/.snap/s/a`
+[ -z "$r" ] && echo "a appears empty in snapshot" && false
+
+ln foo/b foo/b2
+cat foo/.snap/s/b
+
+echo "this used to hang:"
+echo more >> foo/b2
+echo "oh, it didn't hang! good job."
+cat foo/b
+rmdir foo/.snap/s
+
+rm -r foo
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-dir-rename.sh b/qa/workunits/fs/snaps/snaptest-dir-rename.sh
new file mode 100755
index 000000000..3bbd9a11e
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-dir-rename.sh
@@ -0,0 +1,17 @@
+#!/bin/sh -x
+
+set -e
+
+#
+# make sure we keep an existing dn's seq
+#
+
+mkdir a
+mkdir .snap/bar
+mkdir a/.snap/foo
+rmdir a/.snap/foo
+rmdir a
+stat .snap/bar/a
+rmdir .snap/bar
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-double-null.sh b/qa/workunits/fs/snaps/snaptest-double-null.sh
new file mode 100755
index 000000000..cdf32e4f0
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-double-null.sh
@@ -0,0 +1,23 @@
+#!/bin/sh -x
+
+set -e
+
+# multiple intervening snapshots with no modifications, and thus no
+# snapflush client_caps messages.  make sure the mds can handle this.
+
+for f in `seq 1 20` ; do
+
+mkdir a
+cat > a/foo &
+mkdir a/.snap/one
+mkdir a/.snap/two
+chmod 777 a/foo
+sync   # this might crash the mds
+ps
+rmdir a/.snap/*
+rm a/foo
+rmdir a
+
+done
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-estale.sh b/qa/workunits/fs/snaps/snaptest-estale.sh
new file mode 100755
index 000000000..a4fb94368
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-estale.sh
@@ -0,0 +1,13 @@
+#!/bin/sh -x
+
+mkdir .snap/foo
+
+echo "We want ENOENT, not ESTALE, here."
+for f in `seq 1 100`
+do
+    stat .snap/foo/$f 2>&1 | grep 'No such file'
+done
+
+rmdir .snap/foo
+
+echo "OK"
diff --git a/qa/workunits/fs/snaps/snaptest-git-ceph.sh b/qa/workunits/fs/snaps/snaptest-git-ceph.sh
new file mode 100755
index 000000000..12c1f0fdc
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-git-ceph.sh
@@ -0,0 +1,52 @@
+#!/bin/sh -x
+
+set -e
+
+# try it again if the clone is slow and the second time
+retried=false
+trap -- 'retry' EXIT
+retry() {
+    rm -rf ceph
+    # double the timeout value
+    timeout 3600 git clone https://git.ceph.com/ceph.git
+}
+rm -rf ceph
+timeout 1800 git clone https://git.ceph.com/ceph.git
+trap - EXIT
+cd ceph
+
+versions=`seq 1 90`
+
+for v in $versions
+do
+    if [ $v -eq 48 ]; then
+        continue
+    fi
+    ver="v0.$v"
+    echo $ver
+    git reset --hard $ver
+    mkdir .snap/$ver
+done
+
+for v in $versions
+do
+    if [ $v -eq 48 ]; then
+        continue
+    fi
+    ver="v0.$v"
+    echo checking $ver
+    cd .snap/$ver
+    git diff --exit-code
+    cd ../..
+done
+
+for v in $versions
+do
+    if [ $v -eq 48 ]; then
+        continue
+    fi
+    ver="v0.$v"
+    rmdir .snap/$ver
+done
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-hardlink.sh b/qa/workunits/fs/snaps/snaptest-hardlink.sh
new file mode 100755
index 000000000..90f3583b1
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-hardlink.sh
@@ -0,0 +1,25 @@
+#!/bin/sh -x
+
+set -e
+
+mkdir 1 2
+echo asdf >1/file1
+echo asdf >1/file2
+
+ln 1/file1 2/file1
+ln 1/file2 2/file2
+
+mkdir 2/.snap/s1
+
+echo qwer >1/file1
+grep asdf 2/.snap/s1/file1
+
+rm -f 1/file2
+grep asdf 2/.snap/s1/file2
+rm -f 2/file2
+grep asdf 2/.snap/s1/file2
+
+rmdir 2/.snap/s1
+rm -rf 1 2
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-intodir.sh b/qa/workunits/fs/snaps/snaptest-intodir.sh
new file mode 100755
index 000000000..d6a220f73
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-intodir.sh
@@ -0,0 +1,22 @@
+#!/bin/sh -ex
+
+# this tests fix for #1399
+mkdir foo
+mkdir foo/.snap/one
+touch bar
+mv bar foo
+sync
+# should not crash :)
+
+mkdir baz
+mkdir baz/.snap/two
+mv baz foo
+sync
+# should not crash :)
+
+# clean up.
+rmdir foo/baz/.snap/two
+rmdir foo/.snap/one
+rm -r foo
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-multiple-capsnaps.sh b/qa/workunits/fs/snaps/snaptest-multiple-capsnaps.sh
new file mode 100755
index 000000000..5ebc852cf
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-multiple-capsnaps.sh
@@ -0,0 +1,42 @@
+#!/bin/sh -x
+
+set -e
+
+echo asdf > a
+mkdir .snap/1
+chmod 777 a
+mkdir .snap/2
+echo qwer > a
+mkdir .snap/3
+chmod 666 a
+mkdir .snap/4
+echo zxcv > a
+mkdir .snap/5
+
+ls -al .snap/?/a
+
+grep asdf .snap/1/a
+stat .snap/1/a | grep 'Size: 5'
+
+grep asdf .snap/2/a
+stat .snap/2/a | grep 'Size: 5'
+stat .snap/2/a | grep -- '-rwxrwxrwx'
+
+grep qwer .snap/3/a
+stat .snap/3/a | grep 'Size: 5'
+stat .snap/3/a | grep -- '-rwxrwxrwx'
+
+grep qwer .snap/4/a
+stat .snap/4/a | grep 'Size: 5'
+stat .snap/4/a | grep -- '-rw-rw-rw-'
+
+grep zxcv .snap/5/a
+stat .snap/5/a | grep 'Size: 5'
+stat .snap/5/a | grep -- '-rw-rw-rw-'
+
+rmdir .snap/[12345]
+
+echo "OK"
+
+
+
diff --git a/qa/workunits/fs/snaps/snaptest-name-limits.sh b/qa/workunits/fs/snaps/snaptest-name-limits.sh
new file mode 100755
index 000000000..f40d0231e
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-name-limits.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# This tests snapshot names limits: names have to be < 240 chars
+#
+
+function cleanup ()
+{
+	rmdir d1/.snap/*
+	rm -rf d1
+}
+
+function fail ()
+{
+	echo $@
+	cleanup
+	exit 1
+}
+
+mkdir d1
+
+longname=$(printf "%.241d" 2)
+mkdir d1/.snap/$longname 2> /dev/null
+[ -d d1/.snap/$longname ] && fail "Invalid snapshot exists: $longname"
+
+cleanup
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-parents.sh b/qa/workunits/fs/snaps/snaptest-parents.sh
new file mode 100755
index 000000000..7ab1ba7cf
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-parents.sh
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+set -e
+
+echo "making directory tree and files"
+mkdir -p 1/a/b/c/
+echo "i'm file1" > 1/a/file1
+echo "i'm file2" > 1/a/b/file2
+echo "i'm file3" > 1/a/b/c/file3
+echo "snapshotting"
+mkdir 1/.snap/foosnap1
+mkdir 2
+echo "moving tree"
+mv 1/a 2
+echo "checking snapshot contains tree..."
+dir1=`find 1/.snap/foosnap1 | wc -w`
+dir2=`find 2/ | wc -w`
+#diff $dir1 $dir2 && echo "Success!"
+test $dir1==$dir2 && echo "Success!"
+echo "adding folder and file to tree..."
+mkdir 2/a/b/c/d
+echo "i'm file 4!" > 2/a/b/c/d/file4
+echo "snapshotting tree 2"
+mkdir 2/.snap/barsnap2
+echo "comparing snapshots"
+dir1=`find 1/.snap/foosnap1/ -maxdepth 2 | wc -w`
+dir2=`find 2/.snap/barsnap2/ -maxdepth 2 | wc -w`
+#diff $dir1 $dir2 && echo "Success!"
+test $dir1==$dir2 && echo "Success!"
+echo "moving subtree to first folder"
+mv 2/a/b/c 1
+echo "comparing snapshots and new tree"
+dir1=`find 1/ | wc -w`
+dir2=`find 2/.snap/barsnap2/a/b/c | wc -w`
+#diff $dir1 $dir2 && echo "Success!"
+test $dir1==$dir2 && echo "Success!"
+rmdir 1/.snap/*
+rmdir 2/.snap/*
+echo "OK"
diff --git a/qa/workunits/fs/snaps/snaptest-realm-split.sh b/qa/workunits/fs/snaps/snaptest-realm-split.sh
new file mode 100755
index 000000000..300cca21d
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-realm-split.sh
@@ -0,0 +1,31 @@
+#!/bin/sh -x
+
+set -e
+
+mkdir -p 1/a
+exec 3<> 1/a/file1
+
+echo -n a >&3
+
+mkdir 1/.snap/s1
+
+echo -n b >&3
+
+mkdir 2
+# create new snaprealm at dir a, file1's cap should be attached to the new snaprealm
+mv 1/a 2
+
+mkdir 2/.snap/s2
+
+echo -n c >&3
+
+exec 3>&-
+
+grep '^a$' 1/.snap/s1/a/file1
+grep '^ab$' 2/.snap/s2/a/file1
+grep '^abc$' 2/a/file1
+
+rmdir 1/.snap/s1
+rmdir 2/.snap/s2
+rm -rf 1 2
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-snap-rename.sh b/qa/workunits/fs/snaps/snaptest-snap-rename.sh
new file mode 100755
index 000000000..aa7325b92
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-snap-rename.sh
@@ -0,0 +1,33 @@
+#!/bin/sh -x
+
+expect_failure() {
+	if "$@"; then return 1; else return 0; fi
+}
+set -e
+
+mkdir -p d1/d2
+mkdir -p d1/d3
+mkdir d1/.snap/foo
+mkdir d1/d2/.snap/foo
+mkdir d1/d3/.snap/foo
+mkdir d1/d3/.snap/bar
+mv d1/d2/.snap/foo d1/d2/.snap/bar
+# snapshot name can't start with _
+expect_failure mv d1/d2/.snap/bar d1/d2/.snap/_bar
+# can't rename parent snapshot
+expect_failure mv d1/d2/.snap/_foo_* d1/d2/.snap/foo
+expect_failure mv d1/d2/.snap/_foo_* d1/d2/.snap/_foo_1
+# can't rename snapshot to different directroy
+expect_failure mv d1/d2/.snap/bar d1/.snap/
+# can't overwrite existing snapshot
+expect_failure python3 -c "import os; os.rename('d1/d3/.snap/foo', 'd1/d3/.snap/bar')"
+# can't move snaphost out of snapdir
+expect_failure python3 -c "import os; os.rename('d1/.snap/foo', 'd1/foo')"
+
+rmdir d1/.snap/foo
+rmdir d1/d2/.snap/bar
+rmdir d1/d3/.snap/foo
+rmdir d1/d3/.snap/bar
+rm -rf d1
+
+echo OK
diff --git a/qa/workunits/fs/snaps/snaptest-snap-rm-cmp.sh b/qa/workunits/fs/snaps/snaptest-snap-rm-cmp.sh
new file mode 100755
index 000000000..88a0e8ae5
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-snap-rm-cmp.sh
@@ -0,0 +1,24 @@
+#!/bin/sh -x
+
+set -e
+
+file=linux-2.6.33.tar.bz2
+wget -q http://download.ceph.com/qa/$file
+
+real=`md5sum $file | awk '{print $1}'`
+
+for f in `seq 1 20`
+do
+    echo $f
+    cp $file a
+    mkdir .snap/s
+    rm a
+    cp .snap/s/a /tmp/a
+    cur=`md5sum /tmp/a | awk '{print $1}'`
+    if [ "$cur" != "$real" ]; then
+	echo "FAIL: bad match, /tmp/a $cur != real $real"
+	false
+    fi
+    rmdir .snap/s
+done
+rm $file
diff --git a/qa/workunits/fs/snaps/snaptest-upchildrealms.sh b/qa/workunits/fs/snaps/snaptest-upchildrealms.sh
new file mode 100755
index 000000000..4e531a966
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-upchildrealms.sh
@@ -0,0 +1,28 @@
+#!/bin/sh -x
+
+set -e
+
+#
+# verify that a snap update on a parent realm will induce
+# snap cap writeback for inodes child realms
+#
+
+mkdir a
+mkdir a/b
+mkdir a/.snap/a1
+mkdir a/b/.snap/b1
+echo asdf > a/b/foo
+mkdir a/.snap/a2
+# client _should_ have just queued a capsnap for writeback
+ln a/b/foo a/b/bar       # make the server cow the inode
+
+echo "this should not hang..."
+cat a/b/.snap/_a2_*/foo
+echo "good, it did not hang."
+
+rmdir a/b/.snap/b1
+rmdir a/.snap/a1
+rmdir a/.snap/a2
+rm -r a
+
+echo "OK"
diff --git a/qa/workunits/fs/snaps/snaptest-xattrwb.sh b/qa/workunits/fs/snaps/snaptest-xattrwb.sh
new file mode 100755
index 000000000..e503aed77
--- /dev/null
+++ b/qa/workunits/fs/snaps/snaptest-xattrwb.sh
@@ -0,0 +1,29 @@
+#!/bin/sh -x
+
+set -e
+
+echo "testing simple xattr wb"
+touch x
+setfattr -n user.foo x
+mkdir .snap/s1
+getfattr -n user.foo .snap/s1/x | grep user.foo
+rm x
+rmdir .snap/s1
+
+echo "testing wb with pre-wb server cow"
+mkdir a
+mkdir a/b
+mkdir a/b/c
+# b now has As but not Ax
+setfattr -n user.foo a/b
+mkdir a/.snap/s
+mkdir a/b/cc
+# b now has been cowed on the server, but we still have dirty xattr caps
+getfattr -n user.foo a/b          # there they are...
+getfattr -n user.foo a/.snap/s/b | grep user.foo  # should be there, too!
+
+# ok, clean up
+rmdir a/.snap/s
+rm -r a
+
+echo OK
diff --git a/qa/workunits/fs/snaps/untar_snap_rm.sh b/qa/workunits/fs/snaps/untar_snap_rm.sh
new file mode 100755
index 000000000..8a8412e66
--- /dev/null
+++ b/qa/workunits/fs/snaps/untar_snap_rm.sh
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+set -e
+
+do_tarball() {
+    wget http://download.ceph.com/qa/$1
+    tar xvf$2 $1
+    mkdir .snap/k
+    sync
+    rm -rv $3
+    cp -av .snap/k .
+    rmdir .snap/k
+    rm -rv k
+    rm $1
+}
+
+do_tarball coreutils_8.5.orig.tar.gz z coreutils-8.5
+do_tarball linux-2.6.33.tar.bz2 j linux-2.6.33
diff --git a/qa/workunits/fs/test_o_trunc.c b/qa/workunits/fs/test_o_trunc.c
new file mode 100644
index 000000000..1ce19e4bb
--- /dev/null
+++ b/qa/workunits/fs/test_o_trunc.c
@@ -0,0 +1,45 @@
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+
+int main(int argc, char *argv[])
+{
+	char obuf[32], ibuf[1024];
+	int n, max = 0;
+	
+	if (argc > 2)
+		max = atoi(argv[2]);
+	if (!max)
+		max = 600;
+	
+	memset(obuf, 0xff, sizeof(obuf));
+	
+	for (n = 1; n <= max; ++n) {
+		int fd, ret;
+		fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0644);
+		printf("%d/%d: open fd = %d\n", n, max, fd);
+		
+		ret = write(fd, obuf, sizeof(obuf));
+		printf("write ret = %d\n", ret);
+		
+		sleep(1);
+		
+		ret = write(fd, obuf, sizeof(obuf));
+		printf("write ret = %d\n", ret);
+		
+		ret = pread(fd, ibuf, sizeof(ibuf), 0);
+		printf("pread ret = %d\n", ret);
+		
+		if (memcmp(obuf, ibuf, sizeof(obuf))) {
+			printf("mismatch\n");
+			close(fd);
+			break;
+		}
+		close(fd);
+	}
+	return 0;
+}
diff --git a/qa/workunits/fs/test_o_trunc.sh b/qa/workunits/fs/test_o_trunc.sh
new file mode 100755
index 000000000..90a72600d
--- /dev/null
+++ b/qa/workunits/fs/test_o_trunc.sh
@@ -0,0 +1,7 @@
+#!/bin/sh -ex
+
+mydir=`dirname $0`
+$mydir/test_o_trunc trunc.foo 600
+
+echo OK
+
diff --git a/qa/workunits/fs/test_python.sh b/qa/workunits/fs/test_python.sh
new file mode 100755
index 000000000..6e39b95a4
--- /dev/null
+++ b/qa/workunits/fs/test_python.sh
@@ -0,0 +1,6 @@
+#!/bin/sh -ex
+
+# Running as root because the filesystem root directory will be
+# owned by uid 0, and that's where we're writing.
+sudo python3 -m pytest -v $(dirname $0)/../../../src/test/pybind/test_cephfs.py
+exit 0